mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 00:24:58 +08:00
484bb6c969
The function can return negative value so it should be assigned to signed variable. The problem has been detected using patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Chris Zhong <zyw@rock-chips.com>
1196 lines
31 KiB
C
1196 lines
31 KiB
C
/*
|
|
* Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/component.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_of.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drmP.h>
|
|
#include <video/mipi_display.h>
|
|
|
|
#include "rockchip_drm_drv.h"
|
|
#include "rockchip_drm_vop.h"
|
|
|
|
#define DRIVER_NAME "dw-mipi-dsi"
|
|
|
|
#define GRF_SOC_CON6 0x025c
|
|
#define DSI0_SEL_VOP_LIT (1 << 6)
|
|
#define DSI1_SEL_VOP_LIT (1 << 9)
|
|
|
|
#define DSI_VERSION 0x00
|
|
#define DSI_PWR_UP 0x04
|
|
#define RESET 0
|
|
#define POWERUP BIT(0)
|
|
|
|
#define DSI_CLKMGR_CFG 0x08
|
|
#define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8)
|
|
#define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0)
|
|
|
|
#define DSI_DPI_VCID 0x0c
|
|
#define DPI_VID(vid) (((vid) & 0x3) << 0)
|
|
|
|
#define DSI_DPI_COLOR_CODING 0x10
|
|
#define EN18_LOOSELY BIT(8)
|
|
#define DPI_COLOR_CODING_16BIT_1 0x0
|
|
#define DPI_COLOR_CODING_16BIT_2 0x1
|
|
#define DPI_COLOR_CODING_16BIT_3 0x2
|
|
#define DPI_COLOR_CODING_18BIT_1 0x3
|
|
#define DPI_COLOR_CODING_18BIT_2 0x4
|
|
#define DPI_COLOR_CODING_24BIT 0x5
|
|
|
|
#define DSI_DPI_CFG_POL 0x14
|
|
#define COLORM_ACTIVE_LOW BIT(4)
|
|
#define SHUTD_ACTIVE_LOW BIT(3)
|
|
#define HSYNC_ACTIVE_LOW BIT(2)
|
|
#define VSYNC_ACTIVE_LOW BIT(1)
|
|
#define DATAEN_ACTIVE_LOW BIT(0)
|
|
|
|
#define DSI_DPI_LP_CMD_TIM 0x18
|
|
#define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16)
|
|
#define INVACT_LPCMD_TIME(p) ((p) & 0xff)
|
|
|
|
#define DSI_DBI_CFG 0x20
|
|
#define DSI_DBI_CMDSIZE 0x28
|
|
|
|
#define DSI_PCKHDL_CFG 0x2c
|
|
#define EN_CRC_RX BIT(4)
|
|
#define EN_ECC_RX BIT(3)
|
|
#define EN_BTA BIT(2)
|
|
#define EN_EOTP_RX BIT(1)
|
|
#define EN_EOTP_TX BIT(0)
|
|
|
|
#define DSI_MODE_CFG 0x34
|
|
#define ENABLE_VIDEO_MODE 0
|
|
#define ENABLE_CMD_MODE BIT(0)
|
|
|
|
#define DSI_VID_MODE_CFG 0x38
|
|
#define FRAME_BTA_ACK BIT(14)
|
|
#define ENABLE_LOW_POWER (0x3f << 8)
|
|
#define ENABLE_LOW_POWER_MASK (0x3f << 8)
|
|
#define VID_MODE_TYPE_BURST_SYNC_PULSES 0x2
|
|
#define VID_MODE_TYPE_MASK 0x3
|
|
|
|
#define DSI_VID_PKT_SIZE 0x3c
|
|
#define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0)
|
|
#define VID_PKT_MAX_SIZE 0x3fff
|
|
|
|
#define DSI_VID_HSA_TIME 0x48
|
|
#define DSI_VID_HBP_TIME 0x4c
|
|
#define DSI_VID_HLINE_TIME 0x50
|
|
#define DSI_VID_VSA_LINES 0x54
|
|
#define DSI_VID_VBP_LINES 0x58
|
|
#define DSI_VID_VFP_LINES 0x5c
|
|
#define DSI_VID_VACTIVE_LINES 0x60
|
|
#define DSI_CMD_MODE_CFG 0x68
|
|
#define MAX_RD_PKT_SIZE_LP BIT(24)
|
|
#define DCS_LW_TX_LP BIT(19)
|
|
#define DCS_SR_0P_TX_LP BIT(18)
|
|
#define DCS_SW_1P_TX_LP BIT(17)
|
|
#define DCS_SW_0P_TX_LP BIT(16)
|
|
#define GEN_LW_TX_LP BIT(14)
|
|
#define GEN_SR_2P_TX_LP BIT(13)
|
|
#define GEN_SR_1P_TX_LP BIT(12)
|
|
#define GEN_SR_0P_TX_LP BIT(11)
|
|
#define GEN_SW_2P_TX_LP BIT(10)
|
|
#define GEN_SW_1P_TX_LP BIT(9)
|
|
#define GEN_SW_0P_TX_LP BIT(8)
|
|
#define EN_ACK_RQST BIT(1)
|
|
#define EN_TEAR_FX BIT(0)
|
|
|
|
#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \
|
|
DCS_LW_TX_LP | \
|
|
DCS_SR_0P_TX_LP | \
|
|
DCS_SW_1P_TX_LP | \
|
|
DCS_SW_0P_TX_LP | \
|
|
GEN_LW_TX_LP | \
|
|
GEN_SR_2P_TX_LP | \
|
|
GEN_SR_1P_TX_LP | \
|
|
GEN_SR_0P_TX_LP | \
|
|
GEN_SW_2P_TX_LP | \
|
|
GEN_SW_1P_TX_LP | \
|
|
GEN_SW_0P_TX_LP)
|
|
|
|
#define DSI_GEN_HDR 0x6c
|
|
#define GEN_HDATA(data) (((data) & 0xffff) << 8)
|
|
#define GEN_HDATA_MASK (0xffff << 8)
|
|
#define GEN_HTYPE(type) (((type) & 0xff) << 0)
|
|
#define GEN_HTYPE_MASK 0xff
|
|
|
|
#define DSI_GEN_PLD_DATA 0x70
|
|
|
|
#define DSI_CMD_PKT_STATUS 0x74
|
|
#define GEN_CMD_EMPTY BIT(0)
|
|
#define GEN_CMD_FULL BIT(1)
|
|
#define GEN_PLD_W_EMPTY BIT(2)
|
|
#define GEN_PLD_W_FULL BIT(3)
|
|
#define GEN_PLD_R_EMPTY BIT(4)
|
|
#define GEN_PLD_R_FULL BIT(5)
|
|
#define GEN_RD_CMD_BUSY BIT(6)
|
|
|
|
#define DSI_TO_CNT_CFG 0x78
|
|
#define HSTX_TO_CNT(p) (((p) & 0xffff) << 16)
|
|
#define LPRX_TO_CNT(p) ((p) & 0xffff)
|
|
|
|
#define DSI_BTA_TO_CNT 0x8c
|
|
|
|
#define DSI_LPCLK_CTRL 0x94
|
|
#define AUTO_CLKLANE_CTRL BIT(1)
|
|
#define PHY_TXREQUESTCLKHS BIT(0)
|
|
|
|
#define DSI_PHY_TMR_LPCLK_CFG 0x98
|
|
#define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16)
|
|
#define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff)
|
|
|
|
#define DSI_PHY_TMR_CFG 0x9c
|
|
#define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24)
|
|
#define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16)
|
|
#define MAX_RD_TIME(lbcc) ((lbcc) & 0x7fff)
|
|
|
|
#define DSI_PHY_RSTZ 0xa0
|
|
#define PHY_DISFORCEPLL 0
|
|
#define PHY_ENFORCEPLL BIT(3)
|
|
#define PHY_DISABLECLK 0
|
|
#define PHY_ENABLECLK BIT(2)
|
|
#define PHY_RSTZ 0
|
|
#define PHY_UNRSTZ BIT(1)
|
|
#define PHY_SHUTDOWNZ 0
|
|
#define PHY_UNSHUTDOWNZ BIT(0)
|
|
|
|
#define DSI_PHY_IF_CFG 0xa4
|
|
#define N_LANES(n) ((((n) - 1) & 0x3) << 0)
|
|
#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8)
|
|
|
|
#define DSI_PHY_STATUS 0xb0
|
|
#define LOCK BIT(0)
|
|
#define STOP_STATE_CLK_LANE BIT(2)
|
|
|
|
#define DSI_PHY_TST_CTRL0 0xb4
|
|
#define PHY_TESTCLK BIT(1)
|
|
#define PHY_UNTESTCLK 0
|
|
#define PHY_TESTCLR BIT(0)
|
|
#define PHY_UNTESTCLR 0
|
|
|
|
#define DSI_PHY_TST_CTRL1 0xb8
|
|
#define PHY_TESTEN BIT(16)
|
|
#define PHY_UNTESTEN 0
|
|
#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
|
|
#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
|
|
|
|
#define DSI_INT_ST0 0xbc
|
|
#define DSI_INT_ST1 0xc0
|
|
#define DSI_INT_MSK0 0xc4
|
|
#define DSI_INT_MSK1 0xc8
|
|
|
|
#define PHY_STATUS_TIMEOUT_US 10000
|
|
#define CMD_PKT_STATUS_TIMEOUT_US 20000
|
|
|
|
#define BYPASS_VCO_RANGE BIT(7)
|
|
#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3)
|
|
#define VCO_IN_CAP_CON_DEFAULT (0x0 << 1)
|
|
#define VCO_IN_CAP_CON_LOW (0x1 << 1)
|
|
#define VCO_IN_CAP_CON_HIGH (0x2 << 1)
|
|
#define REF_BIAS_CUR_SEL BIT(0)
|
|
|
|
#define CP_CURRENT_3MA BIT(3)
|
|
#define CP_PROGRAM_EN BIT(7)
|
|
#define LPF_PROGRAM_EN BIT(6)
|
|
#define LPF_RESISTORS_20_KOHM 0
|
|
|
|
#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1)
|
|
|
|
#define INPUT_DIVIDER(val) ((val - 1) & 0x7f)
|
|
#define LOW_PROGRAM_EN 0
|
|
#define HIGH_PROGRAM_EN BIT(7)
|
|
#define LOOP_DIV_LOW_SEL(val) ((val - 1) & 0x1f)
|
|
#define LOOP_DIV_HIGH_SEL(val) (((val - 1) >> 5) & 0x1f)
|
|
#define PLL_LOOP_DIV_EN BIT(5)
|
|
#define PLL_INPUT_DIV_EN BIT(4)
|
|
|
|
#define POWER_CONTROL BIT(6)
|
|
#define INTERNAL_REG_CURRENT BIT(3)
|
|
#define BIAS_BLOCK_ON BIT(2)
|
|
#define BANDGAP_ON BIT(0)
|
|
|
|
#define TER_RESISTOR_HIGH BIT(7)
|
|
#define TER_RESISTOR_LOW 0
|
|
#define LEVEL_SHIFTERS_ON BIT(6)
|
|
#define TER_CAL_DONE BIT(5)
|
|
#define SETRD_MAX (0x7 << 2)
|
|
#define POWER_MANAGE BIT(1)
|
|
#define TER_RESISTORS_ON BIT(0)
|
|
|
|
#define BIASEXTR_SEL(val) ((val) & 0x7)
|
|
#define BANDGAP_SEL(val) ((val) & 0x7)
|
|
#define TLP_PROGRAM_EN BIT(7)
|
|
#define THS_PRE_PROGRAM_EN BIT(7)
|
|
#define THS_ZERO_PROGRAM_EN BIT(6)
|
|
|
|
enum {
|
|
BANDGAP_97_07,
|
|
BANDGAP_98_05,
|
|
BANDGAP_99_02,
|
|
BANDGAP_100_00,
|
|
BANDGAP_93_17,
|
|
BANDGAP_94_15,
|
|
BANDGAP_95_12,
|
|
BANDGAP_96_10,
|
|
};
|
|
|
|
enum {
|
|
BIASEXTR_87_1,
|
|
BIASEXTR_91_5,
|
|
BIASEXTR_95_9,
|
|
BIASEXTR_100,
|
|
BIASEXTR_105_94,
|
|
BIASEXTR_111_88,
|
|
BIASEXTR_118_8,
|
|
BIASEXTR_127_7,
|
|
};
|
|
|
|
struct dw_mipi_dsi_plat_data {
|
|
unsigned int max_data_lanes;
|
|
enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
|
|
struct drm_display_mode *mode);
|
|
};
|
|
|
|
struct dw_mipi_dsi {
|
|
struct drm_encoder encoder;
|
|
struct drm_connector connector;
|
|
struct mipi_dsi_host dsi_host;
|
|
struct drm_panel *panel;
|
|
struct device *dev;
|
|
struct regmap *grf_regmap;
|
|
void __iomem *base;
|
|
|
|
struct clk *pllref_clk;
|
|
struct clk *pclk;
|
|
|
|
unsigned int lane_mbps; /* per lane */
|
|
u32 channel;
|
|
u32 lanes;
|
|
u32 format;
|
|
u16 input_div;
|
|
u16 feedback_div;
|
|
struct drm_display_mode *mode;
|
|
|
|
const struct dw_mipi_dsi_plat_data *pdata;
|
|
};
|
|
|
|
enum dw_mipi_dsi_mode {
|
|
DW_MIPI_DSI_CMD_MODE,
|
|
DW_MIPI_DSI_VID_MODE,
|
|
};
|
|
|
|
struct dphy_pll_testdin_map {
|
|
unsigned int max_mbps;
|
|
u8 testdin;
|
|
};
|
|
|
|
/* The table is based on 27MHz DPHY pll reference clock. */
|
|
static const struct dphy_pll_testdin_map dptdin_map[] = {
|
|
{ 90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01},
|
|
{ 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12},
|
|
{ 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23},
|
|
{ 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15},
|
|
{ 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07},
|
|
{ 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09},
|
|
{ 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a},
|
|
{1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
|
|
{1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
|
|
{1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
|
|
};
|
|
|
|
static int max_mbps_to_testdin(unsigned int max_mbps)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
|
|
if (dptdin_map[i].max_mbps > max_mbps)
|
|
return dptdin_map[i].testdin;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* The controller should generate 2 frames before
|
|
* preparing the peripheral.
|
|
*/
|
|
static void dw_mipi_dsi_wait_for_two_frames(struct dw_mipi_dsi *dsi)
|
|
{
|
|
int refresh, two_frames;
|
|
|
|
refresh = drm_mode_vrefresh(dsi->mode);
|
|
two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
|
|
msleep(two_frames);
|
|
}
|
|
|
|
static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
|
|
{
|
|
return container_of(host, struct dw_mipi_dsi, dsi_host);
|
|
}
|
|
|
|
static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
|
|
{
|
|
return container_of(con, struct dw_mipi_dsi, connector);
|
|
}
|
|
|
|
static inline struct dw_mipi_dsi *encoder_to_dsi(struct drm_encoder *encoder)
|
|
{
|
|
return container_of(encoder, struct dw_mipi_dsi, encoder);
|
|
}
|
|
static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
|
|
{
|
|
writel(val, dsi->base + reg);
|
|
}
|
|
|
|
static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
|
|
{
|
|
return readl(dsi->base + reg);
|
|
}
|
|
|
|
static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code,
|
|
u8 test_data)
|
|
{
|
|
/*
|
|
* With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
|
|
* is latched internally as the current test code. Test data is
|
|
* programmed internally by rising edge on TESTCLK.
|
|
*/
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
|
|
PHY_TESTDIN(test_code));
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
|
|
PHY_TESTDIN(test_data));
|
|
|
|
dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
|
|
}
|
|
|
|
static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
|
|
{
|
|
int ret, testdin, vco, val;
|
|
|
|
vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
|
|
|
|
testdin = max_mbps_to_testdin(dsi->lane_mbps);
|
|
if (testdin < 0) {
|
|
dev_err(dsi->dev,
|
|
"failed to get testdin for %dmbps lane clock\n",
|
|
dsi->lane_mbps);
|
|
return testdin;
|
|
}
|
|
|
|
dsi_write(dsi, DSI_PWR_UP, POWERUP);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
|
|
VCO_RANGE_CON_SEL(vco) |
|
|
VCO_IN_CAP_CON_LOW |
|
|
REF_BIAS_CUR_SEL);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA);
|
|
dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN |
|
|
LPF_RESISTORS_20_KOHM);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin));
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
|
|
dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div));
|
|
dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) |
|
|
LOW_PROGRAM_EN);
|
|
dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
|
|
HIGH_PROGRAM_EN);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT |
|
|
BIAS_BLOCK_ON | BANDGAP_ON);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE |
|
|
SETRD_MAX | TER_RESISTORS_ON);
|
|
dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
|
|
SETRD_MAX | POWER_MANAGE |
|
|
TER_RESISTORS_ON);
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN |
|
|
BIASEXTR_SEL(BIASEXTR_127_7));
|
|
dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN |
|
|
BANDGAP_SEL(BANDGAP_96_10));
|
|
|
|
dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | 0xf);
|
|
dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | 0x55);
|
|
dw_mipi_dsi_phy_write(dsi, 0x72, THS_ZERO_PROGRAM_EN | 0xa);
|
|
|
|
dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
|
|
PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
|
|
|
|
|
|
ret = readx_poll_timeout(readl, dsi->base + DSI_PHY_STATUS,
|
|
val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "failed to wait for phy lock state\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = readx_poll_timeout(readl, dsi->base + DSI_PHY_STATUS,
|
|
val, val & STOP_STATE_CLK_LANE, 1000,
|
|
PHY_STATUS_TIMEOUT_US);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev,
|
|
"failed to wait for phy clk lane stop state\n");
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
|
|
{
|
|
unsigned int i, pre;
|
|
unsigned long mpclk, pllref, tmp;
|
|
unsigned int m = 1, n = 1, target_mbps = 1000;
|
|
unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps;
|
|
int bpp;
|
|
|
|
bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
|
|
if (bpp < 0) {
|
|
dev_err(dsi->dev, "failed to get bpp for pixel format %d\n",
|
|
dsi->format);
|
|
return bpp;
|
|
}
|
|
|
|
mpclk = DIV_ROUND_UP(dsi->mode->clock, MSEC_PER_SEC);
|
|
if (mpclk) {
|
|
/* take 1 / 0.9, since mbps must big than bandwidth of RGB */
|
|
tmp = mpclk * (bpp / dsi->lanes) * 10 / 9;
|
|
if (tmp < max_mbps)
|
|
target_mbps = tmp;
|
|
else
|
|
dev_err(dsi->dev, "DPHY clock frequency is out of range\n");
|
|
}
|
|
|
|
pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
|
|
tmp = pllref;
|
|
|
|
for (i = 1; i < 6; i++) {
|
|
pre = pllref / i;
|
|
if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) {
|
|
tmp = target_mbps % pre;
|
|
n = i;
|
|
m = target_mbps / pre;
|
|
}
|
|
if (tmp == 0)
|
|
break;
|
|
}
|
|
|
|
dsi->lane_mbps = pllref / n * m;
|
|
dsi->input_div = n;
|
|
dsi->feedback_div = m;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct dw_mipi_dsi *dsi = host_to_dsi(host);
|
|
|
|
if (device->lanes > dsi->pdata->max_data_lanes) {
|
|
dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
|
|
device->lanes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
|
|
!(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
|
|
dev_err(dsi->dev, "device mode is unsupported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dsi->lanes = device->lanes;
|
|
dsi->channel = device->channel;
|
|
dsi->format = device->format;
|
|
dsi->panel = of_drm_find_panel(device->dev.of_node);
|
|
if (dsi->panel)
|
|
return drm_panel_attach(dsi->panel, &dsi->connector);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct dw_mipi_dsi *dsi = host_to_dsi(host);
|
|
|
|
drm_panel_detach(dsi->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = readx_poll_timeout(readl, dsi->base + DSI_CMD_PKT_STATUS,
|
|
val, !(val & GEN_CMD_FULL), 1000,
|
|
CMD_PKT_STATUS_TIMEOUT_US);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "failed to get available command FIFO\n");
|
|
return ret;
|
|
}
|
|
|
|
dsi_write(dsi, DSI_GEN_HDR, val);
|
|
|
|
ret = readx_poll_timeout(readl, dsi->base + DSI_CMD_PKT_STATUS,
|
|
val, val & (GEN_CMD_EMPTY | GEN_PLD_W_EMPTY),
|
|
1000, CMD_PKT_STATUS_TIMEOUT_US);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "failed to write command FIFO\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
const u16 *tx_buf = msg->tx_buf;
|
|
u32 val = GEN_HDATA(*tx_buf) | GEN_HTYPE(msg->type);
|
|
|
|
if (msg->tx_len > 2) {
|
|
dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
|
|
msg->tx_len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
|
|
}
|
|
|
|
static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
const u32 *tx_buf = msg->tx_buf;
|
|
int len = msg->tx_len, pld_data_bytes = sizeof(*tx_buf), ret;
|
|
u32 val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
|
|
u32 remainder = 0;
|
|
|
|
if (msg->tx_len < 3) {
|
|
dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
|
|
msg->tx_len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
while (DIV_ROUND_UP(len, pld_data_bytes)) {
|
|
if (len < pld_data_bytes) {
|
|
memcpy(&remainder, tx_buf, len);
|
|
dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
|
|
len = 0;
|
|
} else {
|
|
dsi_write(dsi, DSI_GEN_PLD_DATA, *tx_buf);
|
|
tx_buf++;
|
|
len -= pld_data_bytes;
|
|
}
|
|
|
|
ret = readx_poll_timeout(readl, dsi->base + DSI_CMD_PKT_STATUS,
|
|
val, !(val & GEN_PLD_W_FULL), 1000,
|
|
CMD_PKT_STATUS_TIMEOUT_US);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev,
|
|
"failed to get available write payload FIFO\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
|
|
}
|
|
|
|
static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
struct dw_mipi_dsi *dsi = host_to_dsi(host);
|
|
int ret;
|
|
|
|
switch (msg->type) {
|
|
case MIPI_DSI_DCS_SHORT_WRITE:
|
|
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
|
|
case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
|
|
ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
|
|
break;
|
|
case MIPI_DSI_DCS_LONG_WRITE:
|
|
ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
|
|
break;
|
|
default:
|
|
dev_err(dsi->dev, "unsupported message type\n");
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
|
|
.attach = dw_mipi_dsi_host_attach,
|
|
.detach = dw_mipi_dsi_host_detach,
|
|
.transfer = dw_mipi_dsi_host_transfer,
|
|
};
|
|
|
|
static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
|
|
{
|
|
u32 val;
|
|
|
|
val = VID_MODE_TYPE_BURST_SYNC_PULSES | ENABLE_LOW_POWER;
|
|
|
|
dsi_write(dsi, DSI_VID_MODE_CFG, val);
|
|
}
|
|
|
|
static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
|
|
enum dw_mipi_dsi_mode mode)
|
|
{
|
|
if (mode == DW_MIPI_DSI_CMD_MODE) {
|
|
dsi_write(dsi, DSI_PWR_UP, RESET);
|
|
dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
|
|
dsi_write(dsi, DSI_PWR_UP, POWERUP);
|
|
} else {
|
|
dsi_write(dsi, DSI_PWR_UP, RESET);
|
|
dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
|
|
dw_mipi_dsi_video_mode_config(dsi);
|
|
dsi_write(dsi, DSI_PWR_UP, POWERUP);
|
|
}
|
|
}
|
|
|
|
static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
|
|
{
|
|
dsi_write(dsi, DSI_PWR_UP, RESET);
|
|
dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
|
|
}
|
|
|
|
static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
|
|
{
|
|
dsi_write(dsi, DSI_PWR_UP, RESET);
|
|
dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
|
|
| PHY_RSTZ | PHY_SHUTDOWNZ);
|
|
dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
|
|
TX_ESC_CLK_DIVIDSION(7));
|
|
dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
|
|
}
|
|
|
|
static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
u32 val = 0, color = 0;
|
|
|
|
switch (dsi->format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
color = DPI_COLOR_CODING_24BIT;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
color = DPI_COLOR_CODING_18BIT_1;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
color = DPI_COLOR_CODING_16BIT_1;
|
|
break;
|
|
}
|
|
|
|
if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
|
|
val |= VSYNC_ACTIVE_LOW;
|
|
if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
|
|
val |= HSYNC_ACTIVE_LOW;
|
|
|
|
dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
|
|
dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
|
|
dsi_write(dsi, DSI_DPI_CFG_POL, val);
|
|
dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
|
|
| INVACT_LPCMD_TIME(4));
|
|
}
|
|
|
|
static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
|
|
{
|
|
dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
|
|
}
|
|
|
|
static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
|
|
}
|
|
|
|
static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
|
|
{
|
|
dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
|
|
dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
|
|
dsi_write(dsi, DSI_CMD_MODE_CFG, CMD_MODE_ALL_LP);
|
|
dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
|
|
}
|
|
|
|
/* Get lane byte clock cycles. */
|
|
static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
|
|
u32 hcomponent)
|
|
{
|
|
u32 frac, lbcc;
|
|
|
|
lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
|
|
|
|
frac = lbcc % dsi->mode->clock;
|
|
lbcc = lbcc / dsi->mode->clock;
|
|
if (frac)
|
|
lbcc++;
|
|
|
|
return lbcc;
|
|
}
|
|
|
|
static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi)
|
|
{
|
|
u32 htotal, hsa, hbp, lbcc;
|
|
struct drm_display_mode *mode = dsi->mode;
|
|
|
|
htotal = mode->htotal;
|
|
hsa = mode->hsync_end - mode->hsync_start;
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
|
|
lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, htotal);
|
|
dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
|
|
|
|
lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hsa);
|
|
dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
|
|
|
|
lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hbp);
|
|
dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
|
|
}
|
|
|
|
static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi)
|
|
{
|
|
u32 vactive, vsa, vfp, vbp;
|
|
struct drm_display_mode *mode = dsi->mode;
|
|
|
|
vactive = mode->vdisplay;
|
|
vsa = mode->vsync_end - mode->vsync_start;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
|
|
dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
|
|
dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
|
|
dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
|
|
dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
|
|
}
|
|
|
|
static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
|
|
{
|
|
dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
|
|
| PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
|
|
|
|
dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
|
|
| PHY_CLKLP2HS_TIME(0x40));
|
|
}
|
|
|
|
static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
|
|
{
|
|
dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
|
|
N_LANES(dsi->lanes));
|
|
}
|
|
|
|
static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
|
|
{
|
|
dsi_read(dsi, DSI_INT_ST0);
|
|
dsi_read(dsi, DSI_INT_ST1);
|
|
dsi_write(dsi, DSI_INT_MSK0, 0);
|
|
dsi_write(dsi, DSI_INT_MSK1, 0);
|
|
}
|
|
|
|
static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
|
|
int ret;
|
|
|
|
dsi->mode = adjusted_mode;
|
|
|
|
ret = dw_mipi_dsi_get_lane_bps(dsi);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
if (clk_prepare_enable(dsi->pclk)) {
|
|
dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dw_mipi_dsi_init(dsi);
|
|
dw_mipi_dsi_dpi_config(dsi, mode);
|
|
dw_mipi_dsi_packet_handler_config(dsi);
|
|
dw_mipi_dsi_video_mode_config(dsi);
|
|
dw_mipi_dsi_video_packet_config(dsi, mode);
|
|
dw_mipi_dsi_command_mode_config(dsi);
|
|
dw_mipi_dsi_line_timer_config(dsi);
|
|
dw_mipi_dsi_vertical_timing_config(dsi);
|
|
dw_mipi_dsi_dphy_timing_config(dsi);
|
|
dw_mipi_dsi_dphy_interface_config(dsi);
|
|
dw_mipi_dsi_clear_err(dsi);
|
|
if (drm_panel_prepare(dsi->panel))
|
|
dev_err(dsi->dev, "failed to prepare panel\n");
|
|
|
|
clk_disable_unprepare(dsi->pclk);
|
|
}
|
|
|
|
static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
|
|
{
|
|
struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
|
|
|
|
drm_panel_disable(dsi->panel);
|
|
|
|
if (clk_prepare_enable(dsi->pclk)) {
|
|
dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
|
|
drm_panel_unprepare(dsi->panel);
|
|
dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
|
|
|
|
/*
|
|
* This is necessary to make sure the peripheral will be driven
|
|
* normally when the display is enabled again later.
|
|
*/
|
|
msleep(120);
|
|
|
|
dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
|
|
dw_mipi_dsi_disable(dsi);
|
|
clk_disable_unprepare(dsi->pclk);
|
|
}
|
|
|
|
static bool dw_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static void dw_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
|
|
{
|
|
struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
|
|
int mux = rockchip_drm_encoder_get_mux_id(dsi->dev->of_node, encoder);
|
|
u32 interface_pix_fmt;
|
|
u32 val;
|
|
|
|
if (clk_prepare_enable(dsi->pclk)) {
|
|
dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dw_mipi_dsi_phy_init(dsi);
|
|
dw_mipi_dsi_wait_for_two_frames(dsi);
|
|
|
|
dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
|
|
drm_panel_enable(dsi->panel);
|
|
|
|
clk_disable_unprepare(dsi->pclk);
|
|
|
|
switch (dsi->format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
interface_pix_fmt = ROCKCHIP_OUT_MODE_P888;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
interface_pix_fmt = ROCKCHIP_OUT_MODE_P666;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
interface_pix_fmt = ROCKCHIP_OUT_MODE_P565;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
|
|
rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_DSI,
|
|
interface_pix_fmt);
|
|
|
|
if (mux)
|
|
val = DSI0_SEL_VOP_LIT | (DSI0_SEL_VOP_LIT << 16);
|
|
else
|
|
val = DSI0_SEL_VOP_LIT << 16;
|
|
|
|
regmap_write(dsi->grf_regmap, GRF_SOC_CON6, val);
|
|
dev_dbg(dsi->dev, "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
|
|
}
|
|
|
|
static struct drm_encoder_helper_funcs
|
|
dw_mipi_dsi_encoder_helper_funcs = {
|
|
.mode_fixup = dw_mipi_dsi_encoder_mode_fixup,
|
|
.commit = dw_mipi_dsi_encoder_commit,
|
|
.mode_set = dw_mipi_dsi_encoder_mode_set,
|
|
.disable = dw_mipi_dsi_encoder_disable,
|
|
};
|
|
|
|
static struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
|
|
.destroy = drm_encoder_cleanup,
|
|
};
|
|
|
|
static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct dw_mipi_dsi *dsi = con_to_dsi(connector);
|
|
|
|
return drm_panel_get_modes(dsi->panel);
|
|
}
|
|
|
|
static enum drm_mode_status dw_mipi_dsi_mode_valid(
|
|
struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct dw_mipi_dsi *dsi = con_to_dsi(connector);
|
|
|
|
enum drm_mode_status mode_status = MODE_OK;
|
|
|
|
if (dsi->pdata->mode_valid)
|
|
mode_status = dsi->pdata->mode_valid(connector, mode);
|
|
|
|
return mode_status;
|
|
}
|
|
|
|
static struct drm_encoder *dw_mipi_dsi_connector_best_encoder(
|
|
struct drm_connector *connector)
|
|
{
|
|
struct dw_mipi_dsi *dsi = con_to_dsi(connector);
|
|
|
|
return &dsi->encoder;
|
|
}
|
|
|
|
static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
|
|
.get_modes = dw_mipi_dsi_connector_get_modes,
|
|
.mode_valid = dw_mipi_dsi_mode_valid,
|
|
.best_encoder = dw_mipi_dsi_connector_best_encoder,
|
|
};
|
|
|
|
static enum drm_connector_status
|
|
dw_mipi_dsi_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
return connector_status_connected;
|
|
}
|
|
|
|
static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
|
|
{
|
|
drm_connector_unregister(connector);
|
|
drm_connector_cleanup(connector);
|
|
}
|
|
|
|
static struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
|
|
.dpms = drm_atomic_helper_connector_dpms,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.detect = dw_mipi_dsi_detect,
|
|
.destroy = dw_mipi_dsi_drm_connector_destroy,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static int dw_mipi_dsi_register(struct drm_device *drm,
|
|
struct dw_mipi_dsi *dsi)
|
|
{
|
|
struct drm_encoder *encoder = &dsi->encoder;
|
|
struct drm_connector *connector = &dsi->connector;
|
|
struct device *dev = dsi->dev;
|
|
int ret;
|
|
|
|
encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
|
|
dev->of_node);
|
|
/*
|
|
* If we failed to find the CRTC(s) which this encoder is
|
|
* supposed to be connected to, it's because the CRTC has
|
|
* not been registered yet. Defer probing, and hope that
|
|
* the required CRTC is added later.
|
|
*/
|
|
if (encoder->possible_crtcs == 0)
|
|
return -EPROBE_DEFER;
|
|
|
|
drm_encoder_helper_add(&dsi->encoder,
|
|
&dw_mipi_dsi_encoder_helper_funcs);
|
|
ret = drm_encoder_init(drm, &dsi->encoder, &dw_mipi_dsi_encoder_funcs,
|
|
DRM_MODE_ENCODER_DSI, NULL);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to initialize encoder with drm\n");
|
|
return ret;
|
|
}
|
|
|
|
drm_connector_helper_add(connector,
|
|
&dw_mipi_dsi_connector_helper_funcs);
|
|
|
|
drm_connector_init(drm, &dsi->connector,
|
|
&dw_mipi_dsi_atomic_connector_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
drm_mode_connector_attach_encoder(connector, encoder);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
|
|
{
|
|
struct device_node *np = dsi->dev->of_node;
|
|
|
|
dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
|
|
if (IS_ERR(dsi->grf_regmap)) {
|
|
dev_err(dsi->dev, "Unable to get rockchip,grf\n");
|
|
return PTR_ERR(dsi->grf_regmap);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum drm_mode_status rk3288_mipi_dsi_mode_valid(
|
|
struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
/*
|
|
* The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
|
|
* register is 11-bit.
|
|
*/
|
|
if (mode->hdisplay > 0x7ff)
|
|
return MODE_BAD_HVALUE;
|
|
|
|
/*
|
|
* The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
|
|
* register is 11-bit.
|
|
*/
|
|
if (mode->vdisplay > 0x7ff)
|
|
return MODE_BAD_VVALUE;
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
|
|
.max_data_lanes = 4,
|
|
.mode_valid = rk3288_mipi_dsi_mode_valid,
|
|
};
|
|
|
|
static const struct of_device_id dw_mipi_dsi_dt_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3288-mipi-dsi",
|
|
.data = &rk3288_mipi_dsi_drv_data,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids);
|
|
|
|
static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(dw_mipi_dsi_dt_ids, dev);
|
|
const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct drm_device *drm = data;
|
|
struct dw_mipi_dsi *dsi;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
|
|
if (!dsi)
|
|
return -ENOMEM;
|
|
|
|
dsi->dev = dev;
|
|
dsi->pdata = pdata;
|
|
|
|
ret = rockchip_mipi_parse_dt(dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
dsi->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(dsi->base))
|
|
return PTR_ERR(dsi->base);
|
|
|
|
dsi->pllref_clk = devm_clk_get(dev, "ref");
|
|
if (IS_ERR(dsi->pllref_clk)) {
|
|
ret = PTR_ERR(dsi->pllref_clk);
|
|
dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dsi->pclk = devm_clk_get(dev, "pclk");
|
|
if (IS_ERR(dsi->pclk)) {
|
|
ret = PTR_ERR(dsi->pclk);
|
|
dev_err(dev, "Unable to get pclk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dsi->pllref_clk);
|
|
if (ret) {
|
|
dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = dw_mipi_dsi_register(drm, dsi);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to register mipi_dsi: %d\n", ret);
|
|
goto err_pllref;
|
|
}
|
|
|
|
dev_set_drvdata(dev, dsi);
|
|
|
|
dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
|
|
dsi->dsi_host.dev = dev;
|
|
return mipi_dsi_host_register(&dsi->dsi_host);
|
|
|
|
err_pllref:
|
|
clk_disable_unprepare(dsi->pllref_clk);
|
|
return ret;
|
|
}
|
|
|
|
static void dw_mipi_dsi_unbind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
|
|
|
|
mipi_dsi_host_unregister(&dsi->dsi_host);
|
|
clk_disable_unprepare(dsi->pllref_clk);
|
|
}
|
|
|
|
static const struct component_ops dw_mipi_dsi_ops = {
|
|
.bind = dw_mipi_dsi_bind,
|
|
.unbind = dw_mipi_dsi_unbind,
|
|
};
|
|
|
|
static int dw_mipi_dsi_probe(struct platform_device *pdev)
|
|
{
|
|
return component_add(&pdev->dev, &dw_mipi_dsi_ops);
|
|
}
|
|
|
|
static int dw_mipi_dsi_remove(struct platform_device *pdev)
|
|
{
|
|
component_del(&pdev->dev, &dw_mipi_dsi_ops);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver dw_mipi_dsi_driver = {
|
|
.probe = dw_mipi_dsi_probe,
|
|
.remove = dw_mipi_dsi_remove,
|
|
.driver = {
|
|
.of_match_table = dw_mipi_dsi_dt_ids,
|
|
.name = DRIVER_NAME,
|
|
},
|
|
};
|
|
module_platform_driver(dw_mipi_dsi_driver);
|
|
|
|
MODULE_DESCRIPTION("ROCKCHIP MIPI DSI host controller driver");
|
|
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|