linux/drivers/tty/serial
Jan Kiszka a589e211bd gpio: exar: Use correct property prefix and document bindings
The device-specific property should be prefixed with the vendor name,
not "linux,", as Linus Walleij pointed out. Change this and document the
bindings of this platform device.

We didn't ship the old binding in a release yet. So we can still change
it without breaking an official API.

Fixes: 380b1e2f3a ("gpio-exar/8250-exar: Make set of exported GPIOs configurable")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01 13:43:55 +02:00
..
8250 gpio: exar: Use correct property prefix and document bindings 2017-08-01 13:43:55 +02:00
cpm_uart tty: serial: cpm_uart: make use of for_each_node_by_type() 2017-02-03 10:12:16 +01:00
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c serial: altera_jtaguart: adding iounmap() 2017-05-18 16:43:55 +02:00
altera_uart.c serial: altera_uart: call iounmap() at driver remove 2017-05-25 14:36:37 +02:00
amba-pl010.c serial: pl010: Move uart_register_driver call to device probe 2017-05-18 16:19:16 +02:00
amba-pl011.c tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44 2017-04-18 17:47:42 +02:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c tty/serial: atmel: make the driver DT only 2017-06-14 12:48:48 +02:00
atmel_serial.h tty/serial: atmel: move atmel_serial header into driver directory 2017-03-14 10:59:04 +08:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c tty: serial: constify dev_pm_ops structures 2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
dz.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c ACPI: parse SPCR and enable matching console 2016-09-28 17:46:46 +02:00
efm32-uart.c serial: efm32: Fix parity management in 'efm32_uart_console_get_options()' 2017-05-18 16:43:55 +02:00
etraxfs-uart.c
fsl_lpuart.c tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART 2017-07-17 14:14:24 +02:00
icom.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c serial: ifx6x60: fix use-after-free on module unload 2017-05-18 16:43:55 +02:00
ifx6x60.h
imx.c serial: imx: Prevent TX buffer PIO write when a DMA has been started 2017-07-17 14:14:24 +02:00
ioc3_serial.c drivers: tty: serial: move inline before return type 2017-07-12 16:26:04 -07:00
ioc4_serial.c drivers: tty: serial: move inline before return type 2017-07-12 16:26:04 -07:00
ip22zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig tty: serial: Add Actions Semi Owl UART earlycon 2017-06-20 10:24:15 +08:00
kgdb_nmi.c
kgdboc.c
lantiq.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
lpc32xx_hs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
Makefile tty: serial: Add Actions Semi Owl UART earlycon 2017-06-20 10:24:15 +08:00
max310x.c serial: max310x: Add support for newer silicon revisions 2017-01-12 11:51:24 +01:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c tty/serial: meson_uart: update to stable bindings 2017-06-20 10:46:27 +08:00
mpc52xx_uart.c tty: serial: constify psc_ops structs 2016-02-06 22:31:47 -08:00
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c serial/mpsc: switch to dma_alloc_attrs 2017-06-20 10:24:15 +08:00
msm_serial.c tty: serial: msm: Fix module autoload 2017-01-12 11:51:25 +01:00
mux.c
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c serial: mxs-auart: Fix baudrate calculation 2017-03-31 17:26:19 +02:00
netx-serial.c
omap-serial.c tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init 2017-04-12 22:12:16 +02:00
owl-uart.c tty: serial: Add Actions Semi Owl UART earlycon 2017-06-20 10:24:15 +08:00
pch_uart.c serial: pch_uart: use offset_in_page() macro 2017-05-18 16:34:55 +02:00
pic32_uart.c serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy 2017-01-12 11:51:24 +01:00
pic32_uart.h serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pmac_zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pxa.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Remove useless spinlock 2017-04-08 18:58:52 +02:00
samsung.h serial: samsung: Simplify DMA engine initialization code 2017-01-12 11:51:24 +01:00
sb1250-duart.c drivers: convert sbd_duart.map_guard from atomic_t to refcount_t 2017-03-14 11:01:40 +08:00
sc16is7xx.c sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h> 2017-03-02 08:42:27 +01:00
sccnxp.c Fix serial console on SNI RM400 machines 2017-06-03 18:48:52 +09:00
serial_core.c serial: rate limit custom-speed deprecation notice 2017-06-13 11:49:57 +02:00
serial_ks8695.c
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
serial-tegra.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sh-sci.c serial: sh-sci: Uninitialized variables in sysfs files 2017-07-17 13:19:19 +02:00
sh-sci.h serial: sh-sci: consider DR (data ready) bit adequately 2017-02-03 10:14:10 +01:00
sirfsoc_uart.c serial: sirf: make of_device_ids const 2017-06-20 10:24:15 +08:00
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sprd_serial.c serial: sprd: adjust TIMEOUT to a big value 2017-04-08 18:42:47 +02:00
st-asc.c serial: st-asc: Potential error pointer dereference 2017-07-17 13:19:19 +02:00
stm32-usart.c serial: stm32: mark symbols static where possible 2016-09-27 12:55:27 +02:00
stm32-usart.h serial: stm32: Fix comparisons with undefined register 2016-10-27 16:00:31 +02:00
suncore.c
sunhv.c sparc64: Send break twice from console to return to boot prom 2017-02-23 08:27:24 -08:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: Free memory when probe fails 2016-11-16 10:57:26 +01:00
sunzilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c uartlite: Adding a kernel parameter for the number of uartlites 2017-03-17 14:14:30 +09:00
ucc_uart.c QE-UART: add "fsl,t1040-ucc-uart" to of_device_id 2016-05-01 13:55:12 -07:00
vr41xx_siu.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
vt8500_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
xilinx_uartps.c serial: uartps: Fix kernel doc warnings 2017-06-03 18:48:53 +09:00
zs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
zs.h