mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 06:34:12 +08:00
950170d6d2
The driver report a reset event when the hardware reports and overflow. There is no reason to have a generic "reset" event. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
430 lines
10 KiB
C
430 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for Allwinner sunXi IR controller
|
|
*
|
|
* Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
|
|
* Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
|
|
*
|
|
* Based on sun5i-ir.c:
|
|
* Copyright (C) 2007-2012 Daniel Wang
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/reset.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#define SUNXI_IR_DEV "sunxi-ir"
|
|
|
|
/* Registers */
|
|
/* IR Control */
|
|
#define SUNXI_IR_CTL_REG 0x00
|
|
/* Global Enable */
|
|
#define REG_CTL_GEN BIT(0)
|
|
/* RX block enable */
|
|
#define REG_CTL_RXEN BIT(1)
|
|
/* CIR mode */
|
|
#define REG_CTL_MD (BIT(4) | BIT(5))
|
|
|
|
/* Rx Config */
|
|
#define SUNXI_IR_RXCTL_REG 0x10
|
|
/* Pulse Polarity Invert flag */
|
|
#define REG_RXCTL_RPPI BIT(2)
|
|
|
|
/* Rx Data */
|
|
#define SUNXI_IR_RXFIFO_REG 0x20
|
|
|
|
/* Rx Interrupt Enable */
|
|
#define SUNXI_IR_RXINT_REG 0x2C
|
|
/* Rx FIFO Overflow Interrupt Enable */
|
|
#define REG_RXINT_ROI_EN BIT(0)
|
|
/* Rx Packet End Interrupt Enable */
|
|
#define REG_RXINT_RPEI_EN BIT(1)
|
|
/* Rx FIFO Data Available Interrupt Enable */
|
|
#define REG_RXINT_RAI_EN BIT(4)
|
|
|
|
/* Rx FIFO available byte level */
|
|
#define REG_RXINT_RAL(val) ((val) << 8)
|
|
|
|
/* Rx Interrupt Status */
|
|
#define SUNXI_IR_RXSTA_REG 0x30
|
|
/* Rx FIFO Overflow */
|
|
#define REG_RXSTA_ROI REG_RXINT_ROI_EN
|
|
/* Rx Packet End */
|
|
#define REG_RXSTA_RPE REG_RXINT_RPEI_EN
|
|
/* Rx FIFO Data Available */
|
|
#define REG_RXSTA_RA REG_RXINT_RAI_EN
|
|
/* RX FIFO Get Available Counter */
|
|
#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1))
|
|
/* Clear all interrupt status value */
|
|
#define REG_RXSTA_CLEARALL 0xff
|
|
|
|
/* IR Sample Config */
|
|
#define SUNXI_IR_CIR_REG 0x34
|
|
/* CIR_REG register noise threshold */
|
|
#define REG_CIR_NTHR(val) (((val) << 2) & (GENMASK(7, 2)))
|
|
/* CIR_REG register idle threshold */
|
|
#define REG_CIR_ITHR(val) (((val) << 8) & (GENMASK(15, 8)))
|
|
|
|
/* Required frequency for IR0 or IR1 clock in CIR mode (default) */
|
|
#define SUNXI_IR_BASE_CLK 8000000
|
|
/* Noise threshold in samples */
|
|
#define SUNXI_IR_RXNOISE 1
|
|
|
|
/**
|
|
* struct sunxi_ir_quirks - Differences between SoC variants.
|
|
*
|
|
* @has_reset: SoC needs reset deasserted.
|
|
* @fifo_size: size of the fifo.
|
|
*/
|
|
struct sunxi_ir_quirks {
|
|
bool has_reset;
|
|
int fifo_size;
|
|
};
|
|
|
|
struct sunxi_ir {
|
|
struct rc_dev *rc;
|
|
void __iomem *base;
|
|
int irq;
|
|
int fifo_size;
|
|
struct clk *clk;
|
|
struct clk *apb_clk;
|
|
struct reset_control *rst;
|
|
const char *map_name;
|
|
};
|
|
|
|
static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
|
|
{
|
|
unsigned long status;
|
|
unsigned char dt;
|
|
unsigned int cnt, rc;
|
|
struct sunxi_ir *ir = dev_id;
|
|
struct ir_raw_event rawir = {};
|
|
|
|
status = readl(ir->base + SUNXI_IR_RXSTA_REG);
|
|
|
|
/* clean all pending statuses */
|
|
writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
|
|
|
|
if (status & (REG_RXSTA_RA | REG_RXSTA_RPE)) {
|
|
/* How many messages in fifo */
|
|
rc = REG_RXSTA_GET_AC(status);
|
|
/* Sanity check */
|
|
rc = rc > ir->fifo_size ? ir->fifo_size : rc;
|
|
/* If we have data */
|
|
for (cnt = 0; cnt < rc; cnt++) {
|
|
/* for each bit in fifo */
|
|
dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
|
|
rawir.pulse = (dt & 0x80) != 0;
|
|
rawir.duration = ((dt & 0x7f) + 1) *
|
|
ir->rc->rx_resolution;
|
|
ir_raw_event_store_with_filter(ir->rc, &rawir);
|
|
}
|
|
}
|
|
|
|
if (status & REG_RXSTA_ROI) {
|
|
ir_raw_event_overflow(ir->rc);
|
|
} else if (status & REG_RXSTA_RPE) {
|
|
ir_raw_event_set_idle(ir->rc, true);
|
|
ir_raw_event_handle(ir->rc);
|
|
} else {
|
|
ir_raw_event_handle(ir->rc);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Convert idle threshold to usec */
|
|
static unsigned int sunxi_ithr_to_usec(unsigned int base_clk, unsigned int ithr)
|
|
{
|
|
return DIV_ROUND_CLOSEST(USEC_PER_SEC * (ithr + 1),
|
|
base_clk / (128 * 64));
|
|
}
|
|
|
|
/* Convert usec to idle threshold */
|
|
static unsigned int sunxi_usec_to_ithr(unsigned int base_clk, unsigned int usec)
|
|
{
|
|
/* make sure we don't end up with a timeout less than requested */
|
|
return DIV_ROUND_UP((base_clk / (128 * 64)) * usec, USEC_PER_SEC) - 1;
|
|
}
|
|
|
|
static int sunxi_ir_set_timeout(struct rc_dev *rc_dev, unsigned int timeout)
|
|
{
|
|
struct sunxi_ir *ir = rc_dev->priv;
|
|
unsigned int base_clk = clk_get_rate(ir->clk);
|
|
|
|
unsigned int ithr = sunxi_usec_to_ithr(base_clk, timeout);
|
|
|
|
dev_dbg(rc_dev->dev.parent, "setting idle threshold to %u\n", ithr);
|
|
|
|
/* Set noise threshold and idle threshold */
|
|
writel(REG_CIR_NTHR(SUNXI_IR_RXNOISE) | REG_CIR_ITHR(ithr),
|
|
ir->base + SUNXI_IR_CIR_REG);
|
|
|
|
rc_dev->timeout = sunxi_ithr_to_usec(base_clk, ithr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_ir_hw_init(struct device *dev)
|
|
{
|
|
struct sunxi_ir *ir = dev_get_drvdata(dev);
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
ret = reset_control_deassert(ir->rst);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(ir->apb_clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable apb clk\n");
|
|
goto exit_assert_reset;
|
|
}
|
|
|
|
ret = clk_prepare_enable(ir->clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable ir clk\n");
|
|
goto exit_disable_apb_clk;
|
|
}
|
|
|
|
/* Enable CIR Mode */
|
|
writel(REG_CTL_MD, ir->base + SUNXI_IR_CTL_REG);
|
|
|
|
/* Set noise threshold and idle threshold */
|
|
sunxi_ir_set_timeout(ir->rc, ir->rc->timeout);
|
|
|
|
/* Invert Input Signal */
|
|
writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG);
|
|
|
|
/* Clear All Rx Interrupt Status */
|
|
writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
|
|
|
|
/*
|
|
* Enable IRQ on overflow, packet end, FIFO available with trigger
|
|
* level
|
|
*/
|
|
writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
|
|
REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
|
|
ir->base + SUNXI_IR_RXINT_REG);
|
|
|
|
/* Enable IR Module */
|
|
tmp = readl(ir->base + SUNXI_IR_CTL_REG);
|
|
writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG);
|
|
|
|
return 0;
|
|
|
|
exit_disable_apb_clk:
|
|
clk_disable_unprepare(ir->apb_clk);
|
|
exit_assert_reset:
|
|
reset_control_assert(ir->rst);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sunxi_ir_hw_exit(struct device *dev)
|
|
{
|
|
struct sunxi_ir *ir = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(ir->clk);
|
|
clk_disable_unprepare(ir->apb_clk);
|
|
reset_control_assert(ir->rst);
|
|
}
|
|
|
|
static int __maybe_unused sunxi_ir_suspend(struct device *dev)
|
|
{
|
|
sunxi_ir_hw_exit(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sunxi_ir_resume(struct device *dev)
|
|
{
|
|
return sunxi_ir_hw_init(dev);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(sunxi_ir_pm_ops, sunxi_ir_suspend, sunxi_ir_resume);
|
|
|
|
static int sunxi_ir_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *dn = dev->of_node;
|
|
const struct sunxi_ir_quirks *quirks;
|
|
struct sunxi_ir *ir;
|
|
u32 b_clk_freq = SUNXI_IR_BASE_CLK;
|
|
|
|
ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
|
|
if (!ir)
|
|
return -ENOMEM;
|
|
|
|
quirks = of_device_get_match_data(&pdev->dev);
|
|
if (!quirks) {
|
|
dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ir->fifo_size = quirks->fifo_size;
|
|
|
|
/* Clock */
|
|
ir->apb_clk = devm_clk_get(dev, "apb");
|
|
if (IS_ERR(ir->apb_clk)) {
|
|
dev_err(dev, "failed to get a apb clock.\n");
|
|
return PTR_ERR(ir->apb_clk);
|
|
}
|
|
ir->clk = devm_clk_get(dev, "ir");
|
|
if (IS_ERR(ir->clk)) {
|
|
dev_err(dev, "failed to get a ir clock.\n");
|
|
return PTR_ERR(ir->clk);
|
|
}
|
|
|
|
/* Base clock frequency (optional) */
|
|
of_property_read_u32(dn, "clock-frequency", &b_clk_freq);
|
|
|
|
/* Reset */
|
|
if (quirks->has_reset) {
|
|
ir->rst = devm_reset_control_get_exclusive(dev, NULL);
|
|
if (IS_ERR(ir->rst))
|
|
return PTR_ERR(ir->rst);
|
|
}
|
|
|
|
ret = clk_set_rate(ir->clk, b_clk_freq);
|
|
if (ret) {
|
|
dev_err(dev, "set ir base clock failed!\n");
|
|
return ret;
|
|
}
|
|
dev_dbg(dev, "set base clock frequency to %d Hz.\n", b_clk_freq);
|
|
|
|
/* IO */
|
|
ir->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(ir->base)) {
|
|
return PTR_ERR(ir->base);
|
|
}
|
|
|
|
ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!ir->rc) {
|
|
dev_err(dev, "failed to allocate device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ir->rc->priv = ir;
|
|
ir->rc->device_name = SUNXI_IR_DEV;
|
|
ir->rc->input_phys = "sunxi-ir/input0";
|
|
ir->rc->input_id.bustype = BUS_HOST;
|
|
ir->rc->input_id.vendor = 0x0001;
|
|
ir->rc->input_id.product = 0x0001;
|
|
ir->rc->input_id.version = 0x0100;
|
|
ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
|
|
ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
|
|
ir->rc->dev.parent = dev;
|
|
ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
/* Frequency after IR internal divider with sample period in us */
|
|
ir->rc->rx_resolution = (USEC_PER_SEC / (b_clk_freq / 64));
|
|
ir->rc->timeout = IR_DEFAULT_TIMEOUT;
|
|
ir->rc->min_timeout = sunxi_ithr_to_usec(b_clk_freq, 0);
|
|
ir->rc->max_timeout = sunxi_ithr_to_usec(b_clk_freq, 255);
|
|
ir->rc->s_timeout = sunxi_ir_set_timeout;
|
|
ir->rc->driver_name = SUNXI_IR_DEV;
|
|
|
|
ret = rc_register_device(ir->rc);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register rc device\n");
|
|
goto exit_free_dev;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ir);
|
|
|
|
/* IRQ */
|
|
ir->irq = platform_get_irq(pdev, 0);
|
|
if (ir->irq < 0) {
|
|
ret = ir->irq;
|
|
goto exit_free_dev;
|
|
}
|
|
|
|
ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
|
|
if (ret) {
|
|
dev_err(dev, "failed request irq\n");
|
|
goto exit_free_dev;
|
|
}
|
|
|
|
ret = sunxi_ir_hw_init(dev);
|
|
if (ret)
|
|
goto exit_free_dev;
|
|
|
|
dev_info(dev, "initialized sunXi IR driver\n");
|
|
return 0;
|
|
|
|
exit_free_dev:
|
|
rc_free_device(ir->rc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sunxi_ir_remove(struct platform_device *pdev)
|
|
{
|
|
struct sunxi_ir *ir = platform_get_drvdata(pdev);
|
|
|
|
rc_unregister_device(ir->rc);
|
|
sunxi_ir_hw_exit(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sunxi_ir_shutdown(struct platform_device *pdev)
|
|
{
|
|
sunxi_ir_hw_exit(&pdev->dev);
|
|
}
|
|
|
|
static const struct sunxi_ir_quirks sun4i_a10_ir_quirks = {
|
|
.has_reset = false,
|
|
.fifo_size = 16,
|
|
};
|
|
|
|
static const struct sunxi_ir_quirks sun5i_a13_ir_quirks = {
|
|
.has_reset = false,
|
|
.fifo_size = 64,
|
|
};
|
|
|
|
static const struct sunxi_ir_quirks sun6i_a31_ir_quirks = {
|
|
.has_reset = true,
|
|
.fifo_size = 64,
|
|
};
|
|
|
|
static const struct of_device_id sunxi_ir_match[] = {
|
|
{
|
|
.compatible = "allwinner,sun4i-a10-ir",
|
|
.data = &sun4i_a10_ir_quirks,
|
|
},
|
|
{
|
|
.compatible = "allwinner,sun5i-a13-ir",
|
|
.data = &sun5i_a13_ir_quirks,
|
|
},
|
|
{
|
|
.compatible = "allwinner,sun6i-a31-ir",
|
|
.data = &sun6i_a31_ir_quirks,
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sunxi_ir_match);
|
|
|
|
static struct platform_driver sunxi_ir_driver = {
|
|
.probe = sunxi_ir_probe,
|
|
.remove = sunxi_ir_remove,
|
|
.shutdown = sunxi_ir_shutdown,
|
|
.driver = {
|
|
.name = SUNXI_IR_DEV,
|
|
.of_match_table = sunxi_ir_match,
|
|
.pm = &sunxi_ir_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sunxi_ir_driver);
|
|
|
|
MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
|
|
MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
|
|
MODULE_LICENSE("GPL");
|