mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
96487173aa
The current device-tree description of the SolidRun Armada 38x platforms has been successfully tested with production systems. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Jon Nettleton <jon@solid-run.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
105 lines
2.1 KiB
Plaintext
105 lines
2.1 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Device Tree file for SolidRun Armada 38x Microsom
|
|
*
|
|
* Copyright (C) 2015 Russell King
|
|
*/
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
|
|
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
|
|
|
|
internal-regs {
|
|
rtc@a3800 {
|
|
/*
|
|
* If the rtc doesn't work, run "date reset"
|
|
* twice in u-boot.
|
|
*/
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&bm {
|
|
status = "okay";
|
|
};
|
|
|
|
&bm_bppi {
|
|
status = "okay";
|
|
};
|
|
|
|
ð0 {
|
|
/* ethernet@70000 */
|
|
pinctrl-0 = <&ge0_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
phy = <&phy_dedicated>;
|
|
phy-mode = "rgmii-id";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <0>;
|
|
bm,pool-short = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio {
|
|
/*
|
|
* Add the phy clock here, so the phy can be accessed to read its
|
|
* IDs prior to binding with the driver.
|
|
*/
|
|
pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy_dedicated: ethernet-phy@0 {
|
|
/*
|
|
* Annoyingly, the marvell phy driver configures the LED
|
|
* register, rather than preserving reset-loaded setting.
|
|
* We undo that rubbish here.
|
|
*/
|
|
marvell,reg-init = <3 16 0 0x101e>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
microsom_phy_clk_pins: microsom-phy-clk-pins {
|
|
marvell,pins = "mpp45";
|
|
marvell,function = "ref";
|
|
};
|
|
/* Optional eMMC */
|
|
microsom_sdhci_pins: microsom-sdhci-pins {
|
|
marvell,pins = "mpp21", "mpp28", "mpp37",
|
|
"mpp38", "mpp39", "mpp40";
|
|
marvell,function = "sd0";
|
|
};
|
|
};
|
|
|
|
&spi1 {
|
|
/* The microsom has an optional W25Q32 on board, connected to CS0 */
|
|
pinctrl-0 = <&spi1_pins>;
|
|
|
|
w25q32: spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "w25q32", "jedec,spi-nor";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <3000000>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|