mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
21e7daef7e
The TI Davinci DA8xx family of SoCs have a single DSP subsystem that is comprised of TI's standard TMS320C674x megamodule and several blocks of internal memory (L1P, L1D and L2 RAMs). Add the DT node for this DSP processor sub-system. The processor does not have an MMU, and uses a chip-level signalling register and shared memory for inter-processor communication with the ARM core. The node has been added in disabled state, and can be enabled in the respective board dts file with an associated reserved memory block. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
589 lines
14 KiB
Plaintext
589 lines
14 KiB
Plaintext
/*
|
|
* Copyright 2012 DENX Software Engineering GmbH
|
|
* Heiko Schocher <hs@denx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
arm {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
intc: interrupt-controller@fffee000 {
|
|
compatible = "ti,cp-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
ti,intc-size = <101>;
|
|
reg = <0xfffee000 0x2000>;
|
|
};
|
|
};
|
|
dsp: dsp@11800000 {
|
|
compatible = "ti,da850-dsp";
|
|
reg = <0x11800000 0x40000>,
|
|
<0x11e00000 0x8000>,
|
|
<0x11f00000 0x8000>,
|
|
<0x01c14044 0x4>,
|
|
<0x01c14174 0x8>;
|
|
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <28>;
|
|
status = "disabled";
|
|
};
|
|
soc@1c00000 {
|
|
compatible = "simple-bus";
|
|
model = "da850";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x01c00000 0x400000>;
|
|
interrupt-parent = <&intc>;
|
|
|
|
pmx_core: pinmux@14120 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x14120 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <2>;
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0xf>;
|
|
status = "disabled";
|
|
|
|
serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART0_RTS UART0_CTS */
|
|
0x0c 0x22000000 0xff000000
|
|
>;
|
|
};
|
|
serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART0_TXD UART0_RXD */
|
|
0x0c 0x00220000 0x00ff0000
|
|
>;
|
|
};
|
|
serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART1_CTS UART1_RTS */
|
|
0x00 0x00440000 0x00ff0000
|
|
>;
|
|
};
|
|
serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART1_TXD UART1_RXD */
|
|
0x10 0x22000000 0xff000000
|
|
>;
|
|
};
|
|
serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART2_CTS UART2_RTS */
|
|
0x00 0x44000000 0xff000000
|
|
>;
|
|
};
|
|
serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART2_TXD UART2_RXD */
|
|
0x10 0x00220000 0x00ff0000
|
|
>;
|
|
};
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,bits = <
|
|
/* I2C0_SDA,I2C0_SCL */
|
|
0x10 0x00002200 0x0000ff00
|
|
>;
|
|
};
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,bits = <
|
|
/* I2C1_SDA, I2C1_SCL */
|
|
0x10 0x00440000 0x00ff0000
|
|
>;
|
|
};
|
|
mmc0_pins: pinmux_mmc_pins {
|
|
pinctrl-single,bits = <
|
|
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
|
|
* MMCSD0_DAT[1] MMCSD0_DAT[0]
|
|
* MMCSD0_CMD MMCSD0_CLK
|
|
*/
|
|
0x28 0x00222222 0x00ffffff
|
|
>;
|
|
};
|
|
ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
|
|
pinctrl-single,bits = <
|
|
/* EPWM0A */
|
|
0xc 0x00000002 0x0000000f
|
|
>;
|
|
};
|
|
ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
|
|
pinctrl-single,bits = <
|
|
/* EPWM0B */
|
|
0xc 0x00000020 0x000000f0
|
|
>;
|
|
};
|
|
ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
|
|
pinctrl-single,bits = <
|
|
/* EPWM1A */
|
|
0x14 0x00000002 0x0000000f
|
|
>;
|
|
};
|
|
ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
|
|
pinctrl-single,bits = <
|
|
/* EPWM1B */
|
|
0x14 0x00000020 0x000000f0
|
|
>;
|
|
};
|
|
ecap0_pins: pinmux_ecap0_pins {
|
|
pinctrl-single,bits = <
|
|
/* ECAP0_APWM0 */
|
|
0x8 0x20000000 0xf0000000
|
|
>;
|
|
};
|
|
ecap1_pins: pinmux_ecap1_pins {
|
|
pinctrl-single,bits = <
|
|
/* ECAP1_APWM1 */
|
|
0x4 0x40000000 0xf0000000
|
|
>;
|
|
};
|
|
ecap2_pins: pinmux_ecap2_pins {
|
|
pinctrl-single,bits = <
|
|
/* ECAP2_APWM2 */
|
|
0x4 0x00000004 0x0000000f
|
|
>;
|
|
};
|
|
spi0_pins: pinmux_spi0_pins {
|
|
pinctrl-single,bits = <
|
|
/* SIMO, SOMI, CLK */
|
|
0xc 0x00001101 0x0000ff0f
|
|
>;
|
|
};
|
|
spi0_cs0_pin: pinmux_spi0_cs0 {
|
|
pinctrl-single,bits = <
|
|
/* CS0 */
|
|
0x10 0x00000010 0x000000f0
|
|
>;
|
|
};
|
|
spi0_cs3_pin: pinmux_spi0_cs3_pin {
|
|
pinctrl-single,bits = <
|
|
/* CS3 */
|
|
0xc 0x01000000 0x0f000000
|
|
>;
|
|
};
|
|
spi1_pins: pinmux_spi1_pins {
|
|
pinctrl-single,bits = <
|
|
/* SIMO, SOMI, CLK */
|
|
0x14 0x00110100 0x00ff0f00
|
|
>;
|
|
};
|
|
spi1_cs0_pin: pinmux_spi1_cs0 {
|
|
pinctrl-single,bits = <
|
|
/* CS0 */
|
|
0x14 0x00000010 0x000000f0
|
|
>;
|
|
};
|
|
mdio_pins: pinmux_mdio_pins {
|
|
pinctrl-single,bits = <
|
|
/* MDIO_CLK, MDIO_D */
|
|
0x10 0x00000088 0x000000ff
|
|
>;
|
|
};
|
|
mii_pins: pinmux_mii_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* MII_TXEN, MII_TXCLK, MII_COL
|
|
* MII_TXD_3, MII_TXD_2, MII_TXD_1
|
|
* MII_TXD_0
|
|
*/
|
|
0x8 0x88888880 0xfffffff0
|
|
/*
|
|
* MII_RXER, MII_CRS, MII_RXCLK
|
|
* MII_RXDV, MII_RXD_3, MII_RXD_2
|
|
* MII_RXD_1, MII_RXD_0
|
|
*/
|
|
0xc 0x88888888 0xffffffff
|
|
>;
|
|
};
|
|
lcd_pins: pinmux_lcd_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
|
|
* LCD_D[6], LCD_D[7]
|
|
*/
|
|
0x40 0x22222200 0xffffff00
|
|
/*
|
|
* LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
|
|
* LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
|
|
*/
|
|
0x44 0x22222222 0xffffffff
|
|
/* LCD_D[8], LCD_D[9] */
|
|
0x48 0x00000022 0x000000ff
|
|
|
|
/* LCD_PCLK */
|
|
0x48 0x02000000 0x0f000000
|
|
/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
|
|
0x4c 0x02000022 0x0f0000ff
|
|
>;
|
|
};
|
|
vpif_capture_pins: vpif_capture_pins {
|
|
pinctrl-single,bits = <
|
|
/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
|
|
0x38 0x11111111 0xffffffff
|
|
/* VP_DIN[10..15,0..1] */
|
|
0x3c 0x11111111 0xffffffff
|
|
/* VP_DIN[8..9] */
|
|
0x40 0x00000011 0x000000ff
|
|
>;
|
|
};
|
|
vpif_display_pins: vpif_display_pins {
|
|
pinctrl-single,bits = <
|
|
/* VP_DOUT[2..7] */
|
|
0x40 0x11111100 0xffffff00
|
|
/* VP_DOUT[10..15,0..1] */
|
|
0x44 0x11111111 0xffffffff
|
|
/* VP_DOUT[8..9] */
|
|
0x48 0x00000011 0x000000ff
|
|
/*
|
|
* VP_CLKOUT3, VP_CLKIN3,
|
|
* VP_CLKOUT2, VP_CLKIN2
|
|
*/
|
|
0x4c 0x00111100 0x00ffff00
|
|
>;
|
|
};
|
|
};
|
|
prictrl: priority-controller@14110 {
|
|
compatible = "ti,da850-mstpri";
|
|
reg = <0x14110 0x0c>;
|
|
status = "disabled";
|
|
};
|
|
cfgchip: chip-controller@1417c {
|
|
compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
|
|
reg = <0x1417c 0x14>;
|
|
|
|
usb_phy: usb-phy {
|
|
compatible = "ti,da830-usb-phy";
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
edma0: edma@0 {
|
|
compatible = "ti,edma3-tpcc";
|
|
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
|
|
reg = <0x0 0x8000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <11 12>;
|
|
interrupt-names = "edma3_ccint", "edma3_ccerrint";
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
|
|
};
|
|
edma0_tptc0: tptc@8000 {
|
|
compatible = "ti,edma3-tptc";
|
|
reg = <0x8000 0x400>;
|
|
interrupts = <13>;
|
|
interrupt-names = "edm3_tcerrint";
|
|
};
|
|
edma0_tptc1: tptc@8400 {
|
|
compatible = "ti,edma3-tptc";
|
|
reg = <0x8400 0x400>;
|
|
interrupts = <32>;
|
|
interrupt-names = "edm3_tcerrint";
|
|
};
|
|
edma1: edma@230000 {
|
|
compatible = "ti,edma3-tpcc";
|
|
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
|
|
reg = <0x230000 0x8000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <93 94>;
|
|
interrupt-names = "edma3_ccint", "edma3_ccerrint";
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma1_tptc0 7>;
|
|
};
|
|
edma1_tptc0: tptc@238000 {
|
|
compatible = "ti,edma3-tptc";
|
|
reg = <0x238000 0x400>;
|
|
interrupts = <95>;
|
|
interrupt-names = "edm3_tcerrint";
|
|
};
|
|
serial0: serial@42000 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
reg = <0x42000 0x100>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
interrupts = <25>;
|
|
status = "disabled";
|
|
};
|
|
serial1: serial@10c000 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
reg = <0x10c000 0x100>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
interrupts = <53>;
|
|
status = "disabled";
|
|
};
|
|
serial2: serial@10d000 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
reg = <0x10d000 0x100>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
interrupts = <61>;
|
|
status = "disabled";
|
|
};
|
|
rtc0: rtc@23000 {
|
|
compatible = "ti,da830-rtc";
|
|
reg = <0x23000 0x1000>;
|
|
interrupts = <19
|
|
19>;
|
|
status = "disabled";
|
|
};
|
|
i2c0: i2c@22000 {
|
|
compatible = "ti,davinci-i2c";
|
|
reg = <0x22000 0x1000>;
|
|
interrupts = <15>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
i2c1: i2c@228000 {
|
|
compatible = "ti,davinci-i2c";
|
|
reg = <0x228000 0x1000>;
|
|
interrupts = <51>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
wdt: wdt@21000 {
|
|
compatible = "ti,davinci-wdt";
|
|
reg = <0x21000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
mmc0: mmc@40000 {
|
|
compatible = "ti,da830-mmc";
|
|
reg = <0x40000 0x1000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
interrupts = <16>;
|
|
dmas = <&edma0 16 0>, <&edma0 17 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
vpif: video@217000 {
|
|
compatible = "ti,da850-vpif";
|
|
reg = <0x217000 0x1000>;
|
|
interrupts = <92>;
|
|
status = "disabled";
|
|
|
|
/* VPIF capture port */
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
/* VPIF display port */
|
|
port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
mmc1: mmc@21b000 {
|
|
compatible = "ti,da830-mmc";
|
|
reg = <0x21b000 0x1000>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
interrupts = <72>;
|
|
dmas = <&edma1 28 0>, <&edma1 29 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
ehrpwm0: pwm@300000 {
|
|
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
|
|
"ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x300000 0x2000>;
|
|
status = "disabled";
|
|
};
|
|
ehrpwm1: pwm@302000 {
|
|
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
|
|
"ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x302000 0x2000>;
|
|
status = "disabled";
|
|
};
|
|
ecap0: ecap@306000 {
|
|
compatible = "ti,da850-ecap", "ti,am3352-ecap",
|
|
"ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x306000 0x80>;
|
|
status = "disabled";
|
|
};
|
|
ecap1: ecap@307000 {
|
|
compatible = "ti,da850-ecap", "ti,am3352-ecap",
|
|
"ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x307000 0x80>;
|
|
status = "disabled";
|
|
};
|
|
ecap2: ecap@308000 {
|
|
compatible = "ti,da850-ecap", "ti,am3352-ecap",
|
|
"ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x308000 0x80>;
|
|
status = "disabled";
|
|
};
|
|
spi0: spi@41000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "ti,da830-spi";
|
|
reg = <0x41000 0x1000>;
|
|
num-cs = <6>;
|
|
ti,davinci-spi-intr-line = <1>;
|
|
interrupts = <20>;
|
|
dmas = <&edma0 14 0>, <&edma0 15 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
spi1: spi@30e000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "ti,da830-spi";
|
|
reg = <0x30e000 0x1000>;
|
|
num-cs = <4>;
|
|
ti,davinci-spi-intr-line = <1>;
|
|
interrupts = <56>;
|
|
dmas = <&edma0 18 0>, <&edma0 19 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
usb0: usb@200000 {
|
|
compatible = "ti,da830-musb";
|
|
reg = <0x200000 0x1000>;
|
|
ranges;
|
|
interrupts = <58>;
|
|
interrupt-names = "mc";
|
|
dr_mode = "otg";
|
|
phys = <&usb_phy 0>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
dmas = <&cppi41dma 0 0 &cppi41dma 1 0
|
|
&cppi41dma 2 0 &cppi41dma 3 0
|
|
&cppi41dma 0 1 &cppi41dma 1 1
|
|
&cppi41dma 2 1 &cppi41dma 3 1>;
|
|
dma-names =
|
|
"rx1", "rx2", "rx3", "rx4",
|
|
"tx1", "tx2", "tx3", "tx4";
|
|
|
|
cppi41dma: dma-controller@201000 {
|
|
compatible = "ti,da830-cppi41";
|
|
reg = <0x201000 0x1000
|
|
0x202000 0x1000
|
|
0x204000 0x4000>;
|
|
reg-names = "controller",
|
|
"scheduler", "queuemgr";
|
|
interrupts = <58>;
|
|
#dma-cells = <2>;
|
|
#dma-channels = <4>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
sata: sata@218000 {
|
|
compatible = "ti,da850-ahci";
|
|
reg = <0x218000 0x2000>, <0x22c018 0x4>;
|
|
interrupts = <67>;
|
|
status = "disabled";
|
|
};
|
|
mdio: mdio@224000 {
|
|
compatible = "ti,davinci_mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x224000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
eth0: ethernet@220000 {
|
|
compatible = "ti,davinci-dm6467-emac";
|
|
reg = <0x220000 0x4000>;
|
|
ti,davinci-ctrl-reg-offset = <0x3000>;
|
|
ti,davinci-ctrl-mod-reg-offset = <0x2000>;
|
|
ti,davinci-ctrl-ram-offset = <0>;
|
|
ti,davinci-ctrl-ram-size = <0x2000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <33
|
|
34
|
|
35
|
|
36
|
|
>;
|
|
status = "disabled";
|
|
};
|
|
usb1: usb@225000 {
|
|
compatible = "ti,da830-ohci";
|
|
reg = <0x225000 0x1000>;
|
|
interrupts = <59>;
|
|
phys = <&usb_phy 1>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
};
|
|
gpio: gpio@226000 {
|
|
compatible = "ti,dm6441-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0x226000 0x1000>;
|
|
interrupts = <42 IRQ_TYPE_EDGE_BOTH
|
|
43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
|
|
45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
|
|
47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
|
|
49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
|
|
ti,ngpio = <144>;
|
|
ti,davinci-gpio-unbanked = <0>;
|
|
status = "disabled";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
pinconf: pin-controller@22c00c {
|
|
compatible = "ti,da850-pupd";
|
|
reg = <0x22c00c 0x8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mcasp0: mcasp@100000 {
|
|
compatible = "ti,da830-mcasp-audio";
|
|
reg = <0x100000 0x2000>,
|
|
<0x102000 0x400000>;
|
|
reg-names = "mpu", "dat";
|
|
interrupts = <54>;
|
|
interrupt-names = "common";
|
|
status = "disabled";
|
|
dmas = <&edma0 1 1>,
|
|
<&edma0 0 1>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
lcdc: display@213000 {
|
|
compatible = "ti,da850-tilcdc";
|
|
reg = <0x213000 0x1000>;
|
|
interrupts = <52>;
|
|
max-pixelclock = <37500>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
aemif: aemif@68000000 {
|
|
compatible = "ti,da850-aemif";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
reg = <0x68000000 0x00008000>;
|
|
ranges = <0 0 0x60000000 0x08000000
|
|
1 0 0x68000000 0x00008000>;
|
|
status = "disabled";
|
|
};
|
|
memctrl: memory-controller@b0000000 {
|
|
compatible = "ti,da850-ddr-controller";
|
|
reg = <0xb0000000 0xe8>;
|
|
status = "disabled";
|
|
};
|
|
};
|