mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 22:44:27 +08:00
3072601375
The symbols exported for use by MOL/rtlinux aren't getting CRCs and I was about to fix that. But MOL is dead upstream, and the latest work on it was to make it use KVM instead of its own kernel module. So remove them instead. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
1282 lines
34 KiB
ArmAsm
1282 lines
34 KiB
ArmAsm
/*
|
|
* PowerPC version
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
*
|
|
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
|
|
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
|
|
* Adapted for Power Macintosh by Paul Mackerras.
|
|
* Low-level exception handlers and MMU support
|
|
* rewritten by Paul Mackerras.
|
|
* Copyright (C) 1996 Paul Mackerras.
|
|
* MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
|
|
*
|
|
* This file contains the low-level support and setup for the
|
|
* PowerPC platform, including trap and interrupt dispatch.
|
|
* (The PPC 8xx embedded CPUs use head_8xx.S instead.)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/page.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/bug.h>
|
|
#include <asm/kvm_book3s_asm.h>
|
|
#include <asm/export.h>
|
|
|
|
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
|
|
#define LOAD_BAT(n, reg, RA, RB) \
|
|
/* see the comment for clear_bats() -- Cort */ \
|
|
li RA,0; \
|
|
mtspr SPRN_IBAT##n##U,RA; \
|
|
mtspr SPRN_DBAT##n##U,RA; \
|
|
lwz RA,(n*16)+0(reg); \
|
|
lwz RB,(n*16)+4(reg); \
|
|
mtspr SPRN_IBAT##n##U,RA; \
|
|
mtspr SPRN_IBAT##n##L,RB; \
|
|
beq 1f; \
|
|
lwz RA,(n*16)+8(reg); \
|
|
lwz RB,(n*16)+12(reg); \
|
|
mtspr SPRN_DBAT##n##U,RA; \
|
|
mtspr SPRN_DBAT##n##L,RB; \
|
|
1:
|
|
|
|
__HEAD
|
|
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
|
|
.stabs "head_32.S",N_SO,0,0,0f
|
|
0:
|
|
_ENTRY(_stext);
|
|
|
|
/*
|
|
* _start is defined this way because the XCOFF loader in the OpenFirmware
|
|
* on the powermac expects the entry point to be a procedure descriptor.
|
|
*/
|
|
_ENTRY(_start);
|
|
/*
|
|
* These are here for legacy reasons, the kernel used to
|
|
* need to look like a coff function entry for the pmac
|
|
* but we're always started by some kind of bootloader now.
|
|
* -- Cort
|
|
*/
|
|
nop /* used by __secondary_hold on prep (mtx) and chrp smp */
|
|
nop /* used by __secondary_hold on prep (mtx) and chrp smp */
|
|
nop
|
|
|
|
/* PMAC
|
|
* Enter here with the kernel text, data and bss loaded starting at
|
|
* 0, running with virtual == physical mapping.
|
|
* r5 points to the prom entry point (the client interface handler
|
|
* address). Address translation is turned on, with the prom
|
|
* managing the hash table. Interrupts are disabled. The stack
|
|
* pointer (r1) points to just below the end of the half-meg region
|
|
* from 0x380000 - 0x400000, which is mapped in already.
|
|
*
|
|
* If we are booted from MacOS via BootX, we enter with the kernel
|
|
* image loaded somewhere, and the following values in registers:
|
|
* r3: 'BooX' (0x426f6f58)
|
|
* r4: virtual address of boot_infos_t
|
|
* r5: 0
|
|
*
|
|
* PREP
|
|
* This is jumped to on prep systems right after the kernel is relocated
|
|
* to its proper place in memory by the boot loader. The expected layout
|
|
* of the regs is:
|
|
* r3: ptr to residual data
|
|
* r4: initrd_start or if no initrd then 0
|
|
* r5: initrd_end - unused if r4 is 0
|
|
* r6: Start of command line string
|
|
* r7: End of command line string
|
|
*
|
|
* This just gets a minimal mmu environment setup so we can call
|
|
* start_here() to do the real work.
|
|
* -- Cort
|
|
*/
|
|
|
|
.globl __start
|
|
__start:
|
|
/*
|
|
* We have to do any OF calls before we map ourselves to KERNELBASE,
|
|
* because OF may have I/O devices mapped into that area
|
|
* (particularly on CHRP).
|
|
*/
|
|
cmpwi 0,r5,0
|
|
beq 1f
|
|
|
|
#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
|
|
/* find out where we are now */
|
|
bcl 20,31,$+4
|
|
0: mflr r8 /* r8 = runtime addr here */
|
|
addis r8,r8,(_stext - 0b)@ha
|
|
addi r8,r8,(_stext - 0b)@l /* current runtime base addr */
|
|
bl prom_init
|
|
#endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */
|
|
|
|
/* We never return. We also hit that trap if trying to boot
|
|
* from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
|
|
trap
|
|
|
|
/*
|
|
* Check for BootX signature when supporting PowerMac and branch to
|
|
* appropriate trampoline if it's present
|
|
*/
|
|
#ifdef CONFIG_PPC_PMAC
|
|
1: lis r31,0x426f
|
|
ori r31,r31,0x6f58
|
|
cmpw 0,r3,r31
|
|
bne 1f
|
|
bl bootx_init
|
|
trap
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
1: mr r31,r3 /* save device tree ptr */
|
|
li r24,0 /* cpu # */
|
|
|
|
/*
|
|
* early_init() does the early machine identification and does
|
|
* the necessary low-level setup and clears the BSS
|
|
* -- Cort <cort@fsmlabs.com>
|
|
*/
|
|
bl early_init
|
|
|
|
/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
|
|
* the physical address we are running at, returned by early_init()
|
|
*/
|
|
bl mmu_off
|
|
__after_mmu_off:
|
|
bl clear_bats
|
|
bl flush_tlbs
|
|
|
|
bl initial_bats
|
|
#if defined(CONFIG_BOOTX_TEXT)
|
|
bl setup_disp_bat
|
|
#endif
|
|
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
|
|
bl setup_cpm_bat
|
|
#endif
|
|
#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
|
|
bl setup_usbgecko_bat
|
|
#endif
|
|
|
|
/*
|
|
* Call setup_cpu for CPU 0 and initialize 6xx Idle
|
|
*/
|
|
bl reloc_offset
|
|
li r24,0 /* cpu# */
|
|
bl call_setup_cpu /* Call setup_cpu for this CPU */
|
|
#ifdef CONFIG_6xx
|
|
bl reloc_offset
|
|
bl init_idle_6xx
|
|
#endif /* CONFIG_6xx */
|
|
|
|
|
|
/*
|
|
* We need to run with _start at physical address 0.
|
|
* On CHRP, we are loaded at 0x10000 since OF on CHRP uses
|
|
* the exception vectors at 0 (and therefore this copy
|
|
* overwrites OF's exception vectors with our own).
|
|
* The MMU is off at this point.
|
|
*/
|
|
bl reloc_offset
|
|
mr r26,r3
|
|
addis r4,r3,KERNELBASE@h /* current address of _start */
|
|
lis r5,PHYSICAL_START@h
|
|
cmplw 0,r4,r5 /* already running at PHYSICAL_START? */
|
|
bne relocate_kernel
|
|
/*
|
|
* we now have the 1st 16M of ram mapped with the bats.
|
|
* prep needs the mmu to be turned on here, but pmac already has it on.
|
|
* this shouldn't bother the pmac since it just gets turned on again
|
|
* as we jump to our code at KERNELBASE. -- Cort
|
|
* Actually no, pmac doesn't have it on any more. BootX enters with MMU
|
|
* off, and in other cases, we now turn it off before changing BATs above.
|
|
*/
|
|
turn_on_mmu:
|
|
mfmsr r0
|
|
ori r0,r0,MSR_DR|MSR_IR
|
|
mtspr SPRN_SRR1,r0
|
|
lis r0,start_here@h
|
|
ori r0,r0,start_here@l
|
|
mtspr SPRN_SRR0,r0
|
|
SYNC
|
|
RFI /* enables MMU */
|
|
|
|
/*
|
|
* We need __secondary_hold as a place to hold the other cpus on
|
|
* an SMP machine, even when we are running a UP kernel.
|
|
*/
|
|
. = 0xc0 /* for prep bootloader */
|
|
li r3,1 /* MTX only has 1 cpu */
|
|
.globl __secondary_hold
|
|
__secondary_hold:
|
|
/* tell the master we're here */
|
|
stw r3,__secondary_hold_acknowledge@l(0)
|
|
#ifdef CONFIG_SMP
|
|
100: lwz r4,0(0)
|
|
/* wait until we're told to start */
|
|
cmpw 0,r4,r3
|
|
bne 100b
|
|
/* our cpu # was at addr 0 - go */
|
|
mr r24,r3 /* cpu # */
|
|
b __secondary_start
|
|
#else
|
|
b .
|
|
#endif /* CONFIG_SMP */
|
|
|
|
.globl __secondary_hold_spinloop
|
|
__secondary_hold_spinloop:
|
|
.long 0
|
|
.globl __secondary_hold_acknowledge
|
|
__secondary_hold_acknowledge:
|
|
.long -1
|
|
|
|
/*
|
|
* Exception entry code. This code runs with address translation
|
|
* turned off, i.e. using physical addresses.
|
|
* We assume sprg3 has the physical address of the current
|
|
* task's thread_struct.
|
|
*/
|
|
#define EXCEPTION_PROLOG \
|
|
mtspr SPRN_SPRG_SCRATCH0,r10; \
|
|
mtspr SPRN_SPRG_SCRATCH1,r11; \
|
|
mfcr r10; \
|
|
EXCEPTION_PROLOG_1; \
|
|
EXCEPTION_PROLOG_2
|
|
|
|
#define EXCEPTION_PROLOG_1 \
|
|
mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
|
|
andi. r11,r11,MSR_PR; \
|
|
tophys(r11,r1); /* use tophys(r1) if kernel */ \
|
|
beq 1f; \
|
|
mfspr r11,SPRN_SPRG_THREAD; \
|
|
lwz r11,THREAD_INFO-THREAD(r11); \
|
|
addi r11,r11,THREAD_SIZE; \
|
|
tophys(r11,r11); \
|
|
1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
|
|
|
|
|
|
#define EXCEPTION_PROLOG_2 \
|
|
stw r10,_CCR(r11); /* save registers */ \
|
|
stw r12,GPR12(r11); \
|
|
stw r9,GPR9(r11); \
|
|
mfspr r10,SPRN_SPRG_SCRATCH0; \
|
|
stw r10,GPR10(r11); \
|
|
mfspr r12,SPRN_SPRG_SCRATCH1; \
|
|
stw r12,GPR11(r11); \
|
|
mflr r10; \
|
|
stw r10,_LINK(r11); \
|
|
mfspr r12,SPRN_SRR0; \
|
|
mfspr r9,SPRN_SRR1; \
|
|
stw r1,GPR1(r11); \
|
|
stw r1,0(r11); \
|
|
tovirt(r1,r11); /* set new kernel sp */ \
|
|
li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
|
|
MTMSRD(r10); /* (except for mach check in rtas) */ \
|
|
stw r0,GPR0(r11); \
|
|
lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
|
|
addi r10,r10,STACK_FRAME_REGS_MARKER@l; \
|
|
stw r10,8(r11); \
|
|
SAVE_4GPRS(3, r11); \
|
|
SAVE_2GPRS(7, r11)
|
|
|
|
/*
|
|
* Note: code which follows this uses cr0.eq (set if from kernel),
|
|
* r11, r12 (SRR0), and r9 (SRR1).
|
|
*
|
|
* Note2: once we have set r1 we are in a position to take exceptions
|
|
* again, and we could thus set MSR:RI at that point.
|
|
*/
|
|
|
|
/*
|
|
* Exception vectors.
|
|
*/
|
|
#define EXCEPTION(n, label, hdlr, xfer) \
|
|
. = n; \
|
|
DO_KVM n; \
|
|
label: \
|
|
EXCEPTION_PROLOG; \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
xfer(n, hdlr)
|
|
|
|
#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
|
|
li r10,trap; \
|
|
stw r10,_TRAP(r11); \
|
|
li r10,MSR_KERNEL; \
|
|
copyee(r10, r9); \
|
|
bl tfer; \
|
|
i##n: \
|
|
.long hdlr; \
|
|
.long ret
|
|
|
|
#define COPY_EE(d, s) rlwimi d,s,0,16,16
|
|
#define NOCOPY(d, s)
|
|
|
|
#define EXC_XFER_STD(n, hdlr) \
|
|
EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
|
|
ret_from_except_full)
|
|
|
|
#define EXC_XFER_LITE(n, hdlr) \
|
|
EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
|
|
ret_from_except)
|
|
|
|
#define EXC_XFER_EE(n, hdlr) \
|
|
EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
|
|
ret_from_except_full)
|
|
|
|
#define EXC_XFER_EE_LITE(n, hdlr) \
|
|
EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
|
|
ret_from_except)
|
|
|
|
/* System reset */
|
|
/* core99 pmac starts the seconary here by changing the vector, and
|
|
putting it back to what it was (unknown_exception) when done. */
|
|
EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
|
|
|
|
/* Machine check */
|
|
/*
|
|
* On CHRP, this is complicated by the fact that we could get a
|
|
* machine check inside RTAS, and we have no guarantee that certain
|
|
* critical registers will have the values we expect. The set of
|
|
* registers that might have bad values includes all the GPRs
|
|
* and all the BATs. We indicate that we are in RTAS by putting
|
|
* a non-zero value, the address of the exception frame to use,
|
|
* in SPRG2. The machine check handler checks SPRG2 and uses its
|
|
* value if it is non-zero. If we ever needed to free up SPRG2,
|
|
* we could use a field in the thread_info or thread_struct instead.
|
|
* (Other exception handlers assume that r1 is a valid kernel stack
|
|
* pointer when we take an exception from supervisor mode.)
|
|
* -- paulus.
|
|
*/
|
|
. = 0x200
|
|
DO_KVM 0x200
|
|
mtspr SPRN_SPRG_SCRATCH0,r10
|
|
mtspr SPRN_SPRG_SCRATCH1,r11
|
|
mfcr r10
|
|
#ifdef CONFIG_PPC_CHRP
|
|
mfspr r11,SPRN_SPRG_RTAS
|
|
cmpwi 0,r11,0
|
|
bne 7f
|
|
#endif /* CONFIG_PPC_CHRP */
|
|
EXCEPTION_PROLOG_1
|
|
7: EXCEPTION_PROLOG_2
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
#ifdef CONFIG_PPC_CHRP
|
|
mfspr r4,SPRN_SPRG_RTAS
|
|
cmpwi cr1,r4,0
|
|
bne cr1,1f
|
|
#endif
|
|
EXC_XFER_STD(0x200, machine_check_exception)
|
|
#ifdef CONFIG_PPC_CHRP
|
|
1: b machine_check_in_rtas
|
|
#endif
|
|
|
|
/* Data access exception. */
|
|
. = 0x300
|
|
DO_KVM 0x300
|
|
DataAccess:
|
|
EXCEPTION_PROLOG
|
|
mfspr r10,SPRN_DSISR
|
|
stw r10,_DSISR(r11)
|
|
andis. r0,r10,0xa470 /* weird error? */
|
|
bne 1f /* if not, try to put a PTE */
|
|
mfspr r4,SPRN_DAR /* into the hash table */
|
|
rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
|
|
bl hash_page
|
|
1: lwz r5,_DSISR(r11) /* get DSISR value */
|
|
mfspr r4,SPRN_DAR
|
|
EXC_XFER_LITE(0x300, handle_page_fault)
|
|
|
|
|
|
/* Instruction access exception. */
|
|
. = 0x400
|
|
DO_KVM 0x400
|
|
InstructionAccess:
|
|
EXCEPTION_PROLOG
|
|
andis. r0,r9,0x4000 /* no pte found? */
|
|
beq 1f /* if so, try to put a PTE */
|
|
li r3,0 /* into the hash table */
|
|
mr r4,r12 /* SRR0 is fault address */
|
|
bl hash_page
|
|
1: mr r4,r12
|
|
mr r5,r9
|
|
EXC_XFER_LITE(0x400, handle_page_fault)
|
|
|
|
/* External interrupt */
|
|
EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
|
|
|
|
/* Alignment exception */
|
|
. = 0x600
|
|
DO_KVM 0x600
|
|
Alignment:
|
|
EXCEPTION_PROLOG
|
|
mfspr r4,SPRN_DAR
|
|
stw r4,_DAR(r11)
|
|
mfspr r5,SPRN_DSISR
|
|
stw r5,_DSISR(r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_EE(0x600, alignment_exception)
|
|
|
|
/* Program check exception */
|
|
EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
|
|
|
|
/* Floating-point unavailable */
|
|
. = 0x800
|
|
DO_KVM 0x800
|
|
FPUnavailable:
|
|
BEGIN_FTR_SECTION
|
|
/*
|
|
* Certain Freescale cores don't have a FPU and treat fp instructions
|
|
* as a FP Unavailable exception. Redirect to illegal/emulation handling.
|
|
*/
|
|
b ProgramCheck
|
|
END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
|
|
EXCEPTION_PROLOG
|
|
beq 1f
|
|
bl load_up_fpu /* if from user, just load it up */
|
|
b fast_exception_return
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
|
|
|
|
/* Decrementer */
|
|
EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
|
|
|
|
EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
|
|
|
|
/* System call */
|
|
. = 0xc00
|
|
DO_KVM 0xc00
|
|
SystemCall:
|
|
EXCEPTION_PROLOG
|
|
EXC_XFER_EE_LITE(0xc00, DoSyscall)
|
|
|
|
/* Single step - not used on 601 */
|
|
EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
|
|
EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
|
|
|
|
/*
|
|
* The Altivec unavailable trap is at 0x0f20. Foo.
|
|
* We effectively remap it to 0x3000.
|
|
* We include an altivec unavailable exception vector even if
|
|
* not configured for Altivec, so that you can't panic a
|
|
* non-altivec kernel running on a machine with altivec just
|
|
* by executing an altivec instruction.
|
|
*/
|
|
. = 0xf00
|
|
DO_KVM 0xf00
|
|
b PerformanceMonitor
|
|
|
|
. = 0xf20
|
|
DO_KVM 0xf20
|
|
b AltiVecUnavailable
|
|
|
|
/*
|
|
* Handle TLB miss for instruction on 603/603e.
|
|
* Note: we get an alternate set of r0 - r3 to use automatically.
|
|
*/
|
|
. = 0x1000
|
|
InstructionTLBMiss:
|
|
/*
|
|
* r0: scratch
|
|
* r1: linux style pte ( later becomes ppc hardware pte )
|
|
* r2: ptr to linux-style pte
|
|
* r3: scratch
|
|
*/
|
|
/* Get PTE (linux-style) and check access */
|
|
mfspr r3,SPRN_IMISS
|
|
lis r1,PAGE_OFFSET@h /* check if kernel address */
|
|
cmplw 0,r1,r3
|
|
mfspr r2,SPRN_SPRG_THREAD
|
|
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
|
|
lwz r2,PGDIR(r2)
|
|
bge- 112f
|
|
mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
|
|
rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
|
|
lis r2,swapper_pg_dir@ha /* if kernel address, use */
|
|
addi r2,r2,swapper_pg_dir@l /* kernel page table */
|
|
112: tophys(r2,r2)
|
|
rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
|
|
lwz r2,0(r2) /* get pmd entry */
|
|
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
|
|
beq- InstructionAddressInvalid /* return if no mapping */
|
|
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
|
|
lwz r0,0(r2) /* get linux-style pte */
|
|
andc. r1,r1,r0 /* check access & ~permission */
|
|
bne- InstructionAddressInvalid /* return if access not permitted */
|
|
ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
|
|
/*
|
|
* NOTE! We are assuming this is not an SMP system, otherwise
|
|
* we would need to update the pte atomically with lwarx/stwcx.
|
|
*/
|
|
stw r0,0(r2) /* update PTE (accessed bit) */
|
|
/* Convert linux-style PTE to low word of PPC-style PTE */
|
|
rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
|
|
rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
|
|
and r1,r1,r2 /* writable if _RW and _DIRTY */
|
|
rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
|
|
rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
|
|
ori r1,r1,0xe04 /* clear out reserved bits */
|
|
andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
|
|
BEGIN_FTR_SECTION
|
|
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
|
|
mtspr SPRN_RPA,r1
|
|
tlbli r3
|
|
mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
|
|
mtcrf 0x80,r3
|
|
rfi
|
|
InstructionAddressInvalid:
|
|
mfspr r3,SPRN_SRR1
|
|
rlwinm r1,r3,9,6,6 /* Get load/store bit */
|
|
|
|
addis r1,r1,0x2000
|
|
mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */
|
|
andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
|
|
or r2,r2,r1
|
|
mtspr SPRN_SRR1,r2
|
|
mfspr r1,SPRN_IMISS /* Get failing address */
|
|
rlwinm. r2,r2,0,31,31 /* Check for little endian access */
|
|
rlwimi r2,r2,1,30,30 /* change 1 -> 3 */
|
|
xor r1,r1,r2
|
|
mtspr SPRN_DAR,r1 /* Set fault address */
|
|
mfmsr r0 /* Restore "normal" registers */
|
|
xoris r0,r0,MSR_TGPR>>16
|
|
mtcrf 0x80,r3 /* Restore CR0 */
|
|
mtmsr r0
|
|
b InstructionAccess
|
|
|
|
/*
|
|
* Handle TLB miss for DATA Load operation on 603/603e
|
|
*/
|
|
. = 0x1100
|
|
DataLoadTLBMiss:
|
|
/*
|
|
* r0: scratch
|
|
* r1: linux style pte ( later becomes ppc hardware pte )
|
|
* r2: ptr to linux-style pte
|
|
* r3: scratch
|
|
*/
|
|
/* Get PTE (linux-style) and check access */
|
|
mfspr r3,SPRN_DMISS
|
|
lis r1,PAGE_OFFSET@h /* check if kernel address */
|
|
cmplw 0,r1,r3
|
|
mfspr r2,SPRN_SPRG_THREAD
|
|
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
|
|
lwz r2,PGDIR(r2)
|
|
bge- 112f
|
|
mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
|
|
rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
|
|
lis r2,swapper_pg_dir@ha /* if kernel address, use */
|
|
addi r2,r2,swapper_pg_dir@l /* kernel page table */
|
|
112: tophys(r2,r2)
|
|
rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
|
|
lwz r2,0(r2) /* get pmd entry */
|
|
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
|
|
beq- DataAddressInvalid /* return if no mapping */
|
|
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
|
|
lwz r0,0(r2) /* get linux-style pte */
|
|
andc. r1,r1,r0 /* check access & ~permission */
|
|
bne- DataAddressInvalid /* return if access not permitted */
|
|
ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
|
|
/*
|
|
* NOTE! We are assuming this is not an SMP system, otherwise
|
|
* we would need to update the pte atomically with lwarx/stwcx.
|
|
*/
|
|
stw r0,0(r2) /* update PTE (accessed bit) */
|
|
/* Convert linux-style PTE to low word of PPC-style PTE */
|
|
rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
|
|
rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
|
|
and r1,r1,r2 /* writable if _RW and _DIRTY */
|
|
rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
|
|
rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
|
|
ori r1,r1,0xe04 /* clear out reserved bits */
|
|
andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
|
|
BEGIN_FTR_SECTION
|
|
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
|
|
mtspr SPRN_RPA,r1
|
|
mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
|
|
mtcrf 0x80,r2
|
|
BEGIN_MMU_FTR_SECTION
|
|
li r0,1
|
|
mfspr r1,SPRN_SPRG_603_LRU
|
|
rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
|
|
slw r0,r0,r2
|
|
xor r1,r0,r1
|
|
srw r0,r1,r2
|
|
mtspr SPRN_SPRG_603_LRU,r1
|
|
mfspr r2,SPRN_SRR1
|
|
rlwimi r2,r0,31-14,14,14
|
|
mtspr SPRN_SRR1,r2
|
|
END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
|
|
tlbld r3
|
|
rfi
|
|
DataAddressInvalid:
|
|
mfspr r3,SPRN_SRR1
|
|
rlwinm r1,r3,9,6,6 /* Get load/store bit */
|
|
addis r1,r1,0x2000
|
|
mtspr SPRN_DSISR,r1
|
|
andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
|
|
mtspr SPRN_SRR1,r2
|
|
mfspr r1,SPRN_DMISS /* Get failing address */
|
|
rlwinm. r2,r2,0,31,31 /* Check for little endian access */
|
|
beq 20f /* Jump if big endian */
|
|
xori r1,r1,3
|
|
20: mtspr SPRN_DAR,r1 /* Set fault address */
|
|
mfmsr r0 /* Restore "normal" registers */
|
|
xoris r0,r0,MSR_TGPR>>16
|
|
mtcrf 0x80,r3 /* Restore CR0 */
|
|
mtmsr r0
|
|
b DataAccess
|
|
|
|
/*
|
|
* Handle TLB miss for DATA Store on 603/603e
|
|
*/
|
|
. = 0x1200
|
|
DataStoreTLBMiss:
|
|
/*
|
|
* r0: scratch
|
|
* r1: linux style pte ( later becomes ppc hardware pte )
|
|
* r2: ptr to linux-style pte
|
|
* r3: scratch
|
|
*/
|
|
/* Get PTE (linux-style) and check access */
|
|
mfspr r3,SPRN_DMISS
|
|
lis r1,PAGE_OFFSET@h /* check if kernel address */
|
|
cmplw 0,r1,r3
|
|
mfspr r2,SPRN_SPRG_THREAD
|
|
li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
|
|
lwz r2,PGDIR(r2)
|
|
bge- 112f
|
|
mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
|
|
rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
|
|
lis r2,swapper_pg_dir@ha /* if kernel address, use */
|
|
addi r2,r2,swapper_pg_dir@l /* kernel page table */
|
|
112: tophys(r2,r2)
|
|
rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
|
|
lwz r2,0(r2) /* get pmd entry */
|
|
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
|
|
beq- DataAddressInvalid /* return if no mapping */
|
|
rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
|
|
lwz r0,0(r2) /* get linux-style pte */
|
|
andc. r1,r1,r0 /* check access & ~permission */
|
|
bne- DataAddressInvalid /* return if access not permitted */
|
|
ori r0,r0,_PAGE_ACCESSED|_PAGE_DIRTY
|
|
/*
|
|
* NOTE! We are assuming this is not an SMP system, otherwise
|
|
* we would need to update the pte atomically with lwarx/stwcx.
|
|
*/
|
|
stw r0,0(r2) /* update PTE (accessed/dirty bits) */
|
|
/* Convert linux-style PTE to low word of PPC-style PTE */
|
|
rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
|
|
li r1,0xe05 /* clear out reserved bits & PP lsb */
|
|
andc r1,r0,r1 /* PP = user? 2: 0 */
|
|
BEGIN_FTR_SECTION
|
|
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
|
|
mtspr SPRN_RPA,r1
|
|
mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
|
|
mtcrf 0x80,r2
|
|
BEGIN_MMU_FTR_SECTION
|
|
li r0,1
|
|
mfspr r1,SPRN_SPRG_603_LRU
|
|
rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
|
|
slw r0,r0,r2
|
|
xor r1,r0,r1
|
|
srw r0,r1,r2
|
|
mtspr SPRN_SPRG_603_LRU,r1
|
|
mfspr r2,SPRN_SRR1
|
|
rlwimi r2,r0,31-14,14,14
|
|
mtspr SPRN_SRR1,r2
|
|
END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
|
|
tlbld r3
|
|
rfi
|
|
|
|
#ifndef CONFIG_ALTIVEC
|
|
#define altivec_assist_exception unknown_exception
|
|
#endif
|
|
|
|
EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
|
|
EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
|
|
EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
|
|
EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
|
|
EXCEPTION(0x2f00, Trap_2f, unknown_exception, EXC_XFER_EE)
|
|
|
|
. = 0x3000
|
|
|
|
AltiVecUnavailable:
|
|
EXCEPTION_PROLOG
|
|
#ifdef CONFIG_ALTIVEC
|
|
beq 1f
|
|
bl load_up_altivec /* if from user, just load it up */
|
|
b fast_exception_return
|
|
#endif /* CONFIG_ALTIVEC */
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
|
|
|
|
PerformanceMonitor:
|
|
EXCEPTION_PROLOG
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_STD(0xf00, performance_monitor_exception)
|
|
|
|
|
|
/*
|
|
* This code is jumped to from the startup code to copy
|
|
* the kernel image to physical address PHYSICAL_START.
|
|
*/
|
|
relocate_kernel:
|
|
addis r9,r26,klimit@ha /* fetch klimit */
|
|
lwz r25,klimit@l(r9)
|
|
addis r25,r25,-KERNELBASE@h
|
|
lis r3,PHYSICAL_START@h /* Destination base address */
|
|
li r6,0 /* Destination offset */
|
|
li r5,0x4000 /* # bytes of memory to copy */
|
|
bl copy_and_flush /* copy the first 0x4000 bytes */
|
|
addi r0,r3,4f@l /* jump to the address of 4f */
|
|
mtctr r0 /* in copy and do the rest. */
|
|
bctr /* jump to the copy */
|
|
4: mr r5,r25
|
|
bl copy_and_flush /* copy the rest */
|
|
b turn_on_mmu
|
|
|
|
/*
|
|
* Copy routine used to copy the kernel to start at physical address 0
|
|
* and flush and invalidate the caches as needed.
|
|
* r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
|
|
* on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
|
|
*/
|
|
_ENTRY(copy_and_flush)
|
|
addi r5,r5,-4
|
|
addi r6,r6,-4
|
|
4: li r0,L1_CACHE_BYTES/4
|
|
mtctr r0
|
|
3: addi r6,r6,4 /* copy a cache line */
|
|
lwzx r0,r6,r4
|
|
stwx r0,r6,r3
|
|
bdnz 3b
|
|
dcbst r6,r3 /* write it to memory */
|
|
sync
|
|
icbi r6,r3 /* flush the icache line */
|
|
cmplw 0,r6,r5
|
|
blt 4b
|
|
sync /* additional sync needed on g4 */
|
|
isync
|
|
addi r5,r5,4
|
|
addi r6,r6,4
|
|
blr
|
|
|
|
#ifdef CONFIG_SMP
|
|
.globl __secondary_start_mpc86xx
|
|
__secondary_start_mpc86xx:
|
|
mfspr r3, SPRN_PIR
|
|
stw r3, __secondary_hold_acknowledge@l(0)
|
|
mr r24, r3 /* cpu # */
|
|
b __secondary_start
|
|
|
|
.globl __secondary_start_pmac_0
|
|
__secondary_start_pmac_0:
|
|
/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
|
|
li r24,0
|
|
b 1f
|
|
li r24,1
|
|
b 1f
|
|
li r24,2
|
|
b 1f
|
|
li r24,3
|
|
1:
|
|
/* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
|
|
set to map the 0xf0000000 - 0xffffffff region */
|
|
mfmsr r0
|
|
rlwinm r0,r0,0,28,26 /* clear DR (0x10) */
|
|
SYNC
|
|
mtmsr r0
|
|
isync
|
|
|
|
.globl __secondary_start
|
|
__secondary_start:
|
|
/* Copy some CPU settings from CPU 0 */
|
|
bl __restore_cpu_setup
|
|
|
|
lis r3,-KERNELBASE@h
|
|
mr r4,r24
|
|
bl call_setup_cpu /* Call setup_cpu for this CPU */
|
|
#ifdef CONFIG_6xx
|
|
lis r3,-KERNELBASE@h
|
|
bl init_idle_6xx
|
|
#endif /* CONFIG_6xx */
|
|
|
|
/* get current_thread_info and current */
|
|
lis r1,secondary_ti@ha
|
|
tophys(r1,r1)
|
|
lwz r1,secondary_ti@l(r1)
|
|
tophys(r2,r1)
|
|
lwz r2,TI_TASK(r2)
|
|
|
|
/* stack */
|
|
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
|
|
li r0,0
|
|
tophys(r3,r1)
|
|
stw r0,0(r3)
|
|
|
|
/* load up the MMU */
|
|
bl load_up_mmu
|
|
|
|
/* ptr to phys current thread */
|
|
tophys(r4,r2)
|
|
addi r4,r4,THREAD /* phys address of our thread_struct */
|
|
mtspr SPRN_SPRG_THREAD,r4
|
|
li r3,0
|
|
mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
|
|
|
|
/* enable MMU and jump to start_secondary */
|
|
li r4,MSR_KERNEL
|
|
lis r3,start_secondary@h
|
|
ori r3,r3,start_secondary@l
|
|
mtspr SPRN_SRR0,r3
|
|
mtspr SPRN_SRR1,r4
|
|
SYNC
|
|
RFI
|
|
#endif /* CONFIG_SMP */
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_HANDLER
|
|
#include "../kvm/book3s_rmhandlers.S"
|
|
#endif
|
|
|
|
/*
|
|
* Those generic dummy functions are kept for CPUs not
|
|
* included in CONFIG_6xx
|
|
*/
|
|
#if !defined(CONFIG_6xx)
|
|
_ENTRY(__save_cpu_setup)
|
|
blr
|
|
_ENTRY(__restore_cpu_setup)
|
|
blr
|
|
#endif /* !defined(CONFIG_6xx) */
|
|
|
|
|
|
/*
|
|
* Load stuff into the MMU. Intended to be called with
|
|
* IR=0 and DR=0.
|
|
*/
|
|
load_up_mmu:
|
|
sync /* Force all PTE updates to finish */
|
|
isync
|
|
tlbia /* Clear all TLB entries */
|
|
sync /* wait for tlbia/tlbie to finish */
|
|
TLBSYNC /* ... on all CPUs */
|
|
/* Load the SDR1 register (hash table base & size) */
|
|
lis r6,_SDR1@ha
|
|
tophys(r6,r6)
|
|
lwz r6,_SDR1@l(r6)
|
|
mtspr SPRN_SDR1,r6
|
|
li r0,16 /* load up segment register values */
|
|
mtctr r0 /* for context 0 */
|
|
lis r3,0x2000 /* Ku = 1, VSID = 0 */
|
|
li r4,0
|
|
3: mtsrin r3,r4
|
|
addi r3,r3,0x111 /* increment VSID */
|
|
addis r4,r4,0x1000 /* address of next segment */
|
|
bdnz 3b
|
|
|
|
/* Load the BAT registers with the values set up by MMU_init.
|
|
MMU_init takes care of whether we're on a 601 or not. */
|
|
mfpvr r3
|
|
srwi r3,r3,16
|
|
cmpwi r3,1
|
|
lis r3,BATS@ha
|
|
addi r3,r3,BATS@l
|
|
tophys(r3,r3)
|
|
LOAD_BAT(0,r3,r4,r5)
|
|
LOAD_BAT(1,r3,r4,r5)
|
|
LOAD_BAT(2,r3,r4,r5)
|
|
LOAD_BAT(3,r3,r4,r5)
|
|
BEGIN_MMU_FTR_SECTION
|
|
LOAD_BAT(4,r3,r4,r5)
|
|
LOAD_BAT(5,r3,r4,r5)
|
|
LOAD_BAT(6,r3,r4,r5)
|
|
LOAD_BAT(7,r3,r4,r5)
|
|
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
|
|
blr
|
|
|
|
/*
|
|
* This is where the main kernel code starts.
|
|
*/
|
|
start_here:
|
|
/* ptr to current */
|
|
lis r2,init_task@h
|
|
ori r2,r2,init_task@l
|
|
/* Set up for using our exception vectors */
|
|
/* ptr to phys current thread */
|
|
tophys(r4,r2)
|
|
addi r4,r4,THREAD /* init task's THREAD */
|
|
mtspr SPRN_SPRG_THREAD,r4
|
|
li r3,0
|
|
mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
|
|
|
|
/* stack */
|
|
lis r1,init_thread_union@ha
|
|
addi r1,r1,init_thread_union@l
|
|
li r0,0
|
|
stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
|
|
/*
|
|
* Do early platform-specific initialization,
|
|
* and set up the MMU.
|
|
*/
|
|
li r3,0
|
|
mr r4,r31
|
|
bl machine_init
|
|
bl __save_cpu_setup
|
|
bl MMU_init
|
|
|
|
/*
|
|
* Go back to running unmapped so we can load up new values
|
|
* for SDR1 (hash table pointer) and the segment registers
|
|
* and change to using our exception vectors.
|
|
*/
|
|
lis r4,2f@h
|
|
ori r4,r4,2f@l
|
|
tophys(r4,r4)
|
|
li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
|
|
mtspr SPRN_SRR0,r4
|
|
mtspr SPRN_SRR1,r3
|
|
SYNC
|
|
RFI
|
|
/* Load up the kernel context */
|
|
2: bl load_up_mmu
|
|
|
|
#ifdef CONFIG_BDI_SWITCH
|
|
/* Add helper information for the Abatron bdiGDB debugger.
|
|
* We do this here because we know the mmu is disabled, and
|
|
* will be enabled for real in just a few instructions.
|
|
*/
|
|
lis r5, abatron_pteptrs@h
|
|
ori r5, r5, abatron_pteptrs@l
|
|
stw r5, 0xf0(r0) /* This much match your Abatron config */
|
|
lis r6, swapper_pg_dir@h
|
|
ori r6, r6, swapper_pg_dir@l
|
|
tophys(r5, r5)
|
|
stw r6, 0(r5)
|
|
#endif /* CONFIG_BDI_SWITCH */
|
|
|
|
/* Now turn on the MMU for real! */
|
|
li r4,MSR_KERNEL
|
|
lis r3,start_kernel@h
|
|
ori r3,r3,start_kernel@l
|
|
mtspr SPRN_SRR0,r3
|
|
mtspr SPRN_SRR1,r4
|
|
SYNC
|
|
RFI
|
|
|
|
/*
|
|
* void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
|
|
*
|
|
* Set up the segment registers for a new context.
|
|
*/
|
|
_ENTRY(switch_mmu_context)
|
|
lwz r3,MMCONTEXTID(r4)
|
|
cmpwi cr0,r3,0
|
|
blt- 4f
|
|
mulli r3,r3,897 /* multiply context by skew factor */
|
|
rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
|
|
addis r3,r3,0x6000 /* Set Ks, Ku bits */
|
|
li r0,NUM_USER_SEGMENTS
|
|
mtctr r0
|
|
|
|
#ifdef CONFIG_BDI_SWITCH
|
|
/* Context switch the PTE pointer for the Abatron BDI2000.
|
|
* The PGDIR is passed as second argument.
|
|
*/
|
|
lwz r4,MM_PGD(r4)
|
|
lis r5, KERNELBASE@h
|
|
lwz r5, 0xf0(r5)
|
|
stw r4, 0x4(r5)
|
|
#endif
|
|
li r4,0
|
|
isync
|
|
3:
|
|
mtsrin r3,r4
|
|
addi r3,r3,0x111 /* next VSID */
|
|
rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */
|
|
addis r4,r4,0x1000 /* address of next segment */
|
|
bdnz 3b
|
|
sync
|
|
isync
|
|
blr
|
|
4: trap
|
|
EMIT_BUG_ENTRY 4b,__FILE__,__LINE__,0
|
|
blr
|
|
EXPORT_SYMBOL(switch_mmu_context)
|
|
|
|
/*
|
|
* An undocumented "feature" of 604e requires that the v bit
|
|
* be cleared before changing BAT values.
|
|
*
|
|
* Also, newer IBM firmware does not clear bat3 and 4 so
|
|
* this makes sure it's done.
|
|
* -- Cort
|
|
*/
|
|
clear_bats:
|
|
li r10,0
|
|
mfspr r9,SPRN_PVR
|
|
rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
|
|
cmpwi r9, 1
|
|
beq 1f
|
|
|
|
mtspr SPRN_DBAT0U,r10
|
|
mtspr SPRN_DBAT0L,r10
|
|
mtspr SPRN_DBAT1U,r10
|
|
mtspr SPRN_DBAT1L,r10
|
|
mtspr SPRN_DBAT2U,r10
|
|
mtspr SPRN_DBAT2L,r10
|
|
mtspr SPRN_DBAT3U,r10
|
|
mtspr SPRN_DBAT3L,r10
|
|
1:
|
|
mtspr SPRN_IBAT0U,r10
|
|
mtspr SPRN_IBAT0L,r10
|
|
mtspr SPRN_IBAT1U,r10
|
|
mtspr SPRN_IBAT1L,r10
|
|
mtspr SPRN_IBAT2U,r10
|
|
mtspr SPRN_IBAT2L,r10
|
|
mtspr SPRN_IBAT3U,r10
|
|
mtspr SPRN_IBAT3L,r10
|
|
BEGIN_MMU_FTR_SECTION
|
|
/* Here's a tweak: at this point, CPU setup have
|
|
* not been called yet, so HIGH_BAT_EN may not be
|
|
* set in HID0 for the 745x processors. However, it
|
|
* seems that doesn't affect our ability to actually
|
|
* write to these SPRs.
|
|
*/
|
|
mtspr SPRN_DBAT4U,r10
|
|
mtspr SPRN_DBAT4L,r10
|
|
mtspr SPRN_DBAT5U,r10
|
|
mtspr SPRN_DBAT5L,r10
|
|
mtspr SPRN_DBAT6U,r10
|
|
mtspr SPRN_DBAT6L,r10
|
|
mtspr SPRN_DBAT7U,r10
|
|
mtspr SPRN_DBAT7L,r10
|
|
mtspr SPRN_IBAT4U,r10
|
|
mtspr SPRN_IBAT4L,r10
|
|
mtspr SPRN_IBAT5U,r10
|
|
mtspr SPRN_IBAT5L,r10
|
|
mtspr SPRN_IBAT6U,r10
|
|
mtspr SPRN_IBAT6L,r10
|
|
mtspr SPRN_IBAT7U,r10
|
|
mtspr SPRN_IBAT7L,r10
|
|
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
|
|
blr
|
|
|
|
flush_tlbs:
|
|
lis r10, 0x40
|
|
1: addic. r10, r10, -0x1000
|
|
tlbie r10
|
|
bgt 1b
|
|
sync
|
|
blr
|
|
|
|
mmu_off:
|
|
addi r4, r3, __after_mmu_off - _start
|
|
mfmsr r3
|
|
andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
|
|
beqlr
|
|
andc r3,r3,r0
|
|
mtspr SPRN_SRR0,r4
|
|
mtspr SPRN_SRR1,r3
|
|
sync
|
|
RFI
|
|
|
|
/*
|
|
* On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
|
|
* (we keep one for debugging) and on others, we use one 256M BAT.
|
|
*/
|
|
initial_bats:
|
|
lis r11,PAGE_OFFSET@h
|
|
mfspr r9,SPRN_PVR
|
|
rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
|
|
cmpwi 0,r9,1
|
|
bne 4f
|
|
ori r11,r11,4 /* set up BAT registers for 601 */
|
|
li r8,0x7f /* valid, block length = 8MB */
|
|
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
|
|
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
|
|
addis r11,r11,0x800000@h
|
|
addis r8,r8,0x800000@h
|
|
mtspr SPRN_IBAT1U,r11
|
|
mtspr SPRN_IBAT1L,r8
|
|
addis r11,r11,0x800000@h
|
|
addis r8,r8,0x800000@h
|
|
mtspr SPRN_IBAT2U,r11
|
|
mtspr SPRN_IBAT2L,r8
|
|
isync
|
|
blr
|
|
|
|
4: tophys(r8,r11)
|
|
#ifdef CONFIG_SMP
|
|
ori r8,r8,0x12 /* R/W access, M=1 */
|
|
#else
|
|
ori r8,r8,2 /* R/W access */
|
|
#endif /* CONFIG_SMP */
|
|
ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
|
|
|
|
mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
|
|
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
|
|
mtspr SPRN_IBAT0L,r8
|
|
mtspr SPRN_IBAT0U,r11
|
|
isync
|
|
blr
|
|
|
|
|
|
#ifdef CONFIG_BOOTX_TEXT
|
|
setup_disp_bat:
|
|
/*
|
|
* setup the display bat prepared for us in prom.c
|
|
*/
|
|
mflr r8
|
|
bl reloc_offset
|
|
mtlr r8
|
|
addis r8,r3,disp_BAT@ha
|
|
addi r8,r8,disp_BAT@l
|
|
cmpwi cr0,r8,0
|
|
beqlr
|
|
lwz r11,0(r8)
|
|
lwz r8,4(r8)
|
|
mfspr r9,SPRN_PVR
|
|
rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
|
|
cmpwi 0,r9,1
|
|
beq 1f
|
|
mtspr SPRN_DBAT3L,r8
|
|
mtspr SPRN_DBAT3U,r11
|
|
blr
|
|
1: mtspr SPRN_IBAT3L,r8
|
|
mtspr SPRN_IBAT3U,r11
|
|
blr
|
|
#endif /* CONFIG_BOOTX_TEXT */
|
|
|
|
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
|
|
setup_cpm_bat:
|
|
lis r8, 0xf000
|
|
ori r8, r8, 0x002a
|
|
mtspr SPRN_DBAT1L, r8
|
|
|
|
lis r11, 0xf000
|
|
ori r11, r11, (BL_1M << 2) | 2
|
|
mtspr SPRN_DBAT1U, r11
|
|
|
|
blr
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
|
|
setup_usbgecko_bat:
|
|
/* prepare a BAT for early io */
|
|
#if defined(CONFIG_GAMECUBE)
|
|
lis r8, 0x0c00
|
|
#elif defined(CONFIG_WII)
|
|
lis r8, 0x0d00
|
|
#else
|
|
#error Invalid platform for USB Gecko based early debugging.
|
|
#endif
|
|
/*
|
|
* The virtual address used must match the virtual address
|
|
* associated to the fixmap entry FIX_EARLY_DEBUG_BASE.
|
|
*/
|
|
lis r11, 0xfffe /* top 128K */
|
|
ori r8, r8, 0x002a /* uncached, guarded ,rw */
|
|
ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */
|
|
mtspr SPRN_DBAT1L, r8
|
|
mtspr SPRN_DBAT1U, r11
|
|
blr
|
|
#endif
|
|
|
|
#ifdef CONFIG_8260
|
|
/* Jump into the system reset for the rom.
|
|
* We first disable the MMU, and then jump to the ROM reset address.
|
|
*
|
|
* r3 is the board info structure, r4 is the location for starting.
|
|
* I use this for building a small kernel that can load other kernels,
|
|
* rather than trying to write or rely on a rom monitor that can tftp load.
|
|
*/
|
|
.globl m8260_gorom
|
|
m8260_gorom:
|
|
mfmsr r0
|
|
rlwinm r0,r0,0,17,15 /* clear MSR_EE in r0 */
|
|
sync
|
|
mtmsr r0
|
|
sync
|
|
mfspr r11, SPRN_HID0
|
|
lis r10, 0
|
|
ori r10,r10,HID0_ICE|HID0_DCE
|
|
andc r11, r11, r10
|
|
mtspr SPRN_HID0, r11
|
|
isync
|
|
li r5, MSR_ME|MSR_RI
|
|
lis r6,2f@h
|
|
addis r6,r6,-KERNELBASE@h
|
|
ori r6,r6,2f@l
|
|
mtspr SPRN_SRR0,r6
|
|
mtspr SPRN_SRR1,r5
|
|
isync
|
|
sync
|
|
rfi
|
|
2:
|
|
mtlr r4
|
|
blr
|
|
#endif
|
|
|
|
|
|
/*
|
|
* We put a few things here that have to be page-aligned.
|
|
* This stuff goes at the beginning of the data segment,
|
|
* which is page-aligned.
|
|
*/
|
|
.data
|
|
.globl sdata
|
|
sdata:
|
|
.globl empty_zero_page
|
|
empty_zero_page:
|
|
.space 4096
|
|
EXPORT_SYMBOL(empty_zero_page)
|
|
|
|
.globl swapper_pg_dir
|
|
swapper_pg_dir:
|
|
.space PGD_TABLE_SIZE
|
|
|
|
/* Room for two PTE pointers, usually the kernel and current user pointers
|
|
* to their respective root page table.
|
|
*/
|
|
abatron_pteptrs:
|
|
.space 8
|