mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
0a7dc8318c
i.MX is a DT-only platform, so of_match_ptr() can be safely removed. Remove the unneeded of_match_ptr(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
458 lines
12 KiB
C
458 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/devfreq.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/arm-smccc.h>
|
|
|
|
#define IMX_SIP_DDR_DVFS 0xc2000004
|
|
|
|
/* Query available frequencies. */
|
|
#define IMX_SIP_DDR_DVFS_GET_FREQ_COUNT 0x10
|
|
#define IMX_SIP_DDR_DVFS_GET_FREQ_INFO 0x11
|
|
|
|
/*
|
|
* This should be in a 1:1 mapping with devicetree OPPs but
|
|
* firmware provides additional info.
|
|
*/
|
|
struct imx8m_ddrc_freq {
|
|
unsigned long rate;
|
|
unsigned long smcarg;
|
|
int dram_core_parent_index;
|
|
int dram_alt_parent_index;
|
|
int dram_apb_parent_index;
|
|
};
|
|
|
|
/* Hardware limitation */
|
|
#define IMX8M_DDRC_MAX_FREQ_COUNT 4
|
|
|
|
/*
|
|
* i.MX8M DRAM Controller clocks have the following structure (abridged):
|
|
*
|
|
* +----------+ |\ +------+
|
|
* | dram_pll |-------|M| dram_core | |
|
|
* +----------+ |U|---------->| D |
|
|
* /--|X| | D |
|
|
* dram_alt_root | |/ | R |
|
|
* | | C |
|
|
* +---------+ | |
|
|
* |FIX DIV/4| | |
|
|
* +---------+ | |
|
|
* composite: | | |
|
|
* +----------+ | | |
|
|
* | dram_alt |----/ | |
|
|
* +----------+ | |
|
|
* | dram_apb |-------------------->| |
|
|
* +----------+ +------+
|
|
*
|
|
* The dram_pll is used for higher rates and dram_alt is used for lower rates.
|
|
*
|
|
* Frequency switching is implemented in TF-A (via SMC call) and can change the
|
|
* configuration of the clocks, including mux parents. The dram_alt and
|
|
* dram_apb clocks are "imx composite" and their parent can change too.
|
|
*
|
|
* We need to prepare/enable the new mux parents head of switching and update
|
|
* their information afterwards.
|
|
*/
|
|
struct imx8m_ddrc {
|
|
struct devfreq_dev_profile profile;
|
|
struct devfreq *devfreq;
|
|
|
|
/* For frequency switching: */
|
|
struct clk *dram_core;
|
|
struct clk *dram_pll;
|
|
struct clk *dram_alt;
|
|
struct clk *dram_apb;
|
|
|
|
int freq_count;
|
|
struct imx8m_ddrc_freq freq_table[IMX8M_DDRC_MAX_FREQ_COUNT];
|
|
};
|
|
|
|
static struct imx8m_ddrc_freq *imx8m_ddrc_find_freq(struct imx8m_ddrc *priv,
|
|
unsigned long rate)
|
|
{
|
|
struct imx8m_ddrc_freq *freq;
|
|
int i;
|
|
|
|
/*
|
|
* Firmware reports values in MT/s, so we round-down from Hz
|
|
* Rounding is extra generous to ensure a match.
|
|
*/
|
|
rate = DIV_ROUND_CLOSEST(rate, 250000);
|
|
for (i = 0; i < priv->freq_count; ++i) {
|
|
freq = &priv->freq_table[i];
|
|
if (freq->rate == rate ||
|
|
freq->rate + 1 == rate ||
|
|
freq->rate - 1 == rate)
|
|
return freq;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void imx8m_ddrc_smc_set_freq(int target_freq)
|
|
{
|
|
struct arm_smccc_res res;
|
|
u32 online_cpus = 0;
|
|
int cpu;
|
|
|
|
local_irq_disable();
|
|
|
|
for_each_online_cpu(cpu)
|
|
online_cpus |= (1 << (cpu * 8));
|
|
|
|
/* change the ddr freqency */
|
|
arm_smccc_smc(IMX_SIP_DDR_DVFS, target_freq, online_cpus,
|
|
0, 0, 0, 0, 0, &res);
|
|
|
|
local_irq_enable();
|
|
}
|
|
|
|
static struct clk *clk_get_parent_by_index(struct clk *clk, int index)
|
|
{
|
|
struct clk_hw *hw;
|
|
|
|
hw = clk_hw_get_parent_by_index(__clk_get_hw(clk), index);
|
|
|
|
return hw ? hw->clk : NULL;
|
|
}
|
|
|
|
static int imx8m_ddrc_set_freq(struct device *dev, struct imx8m_ddrc_freq *freq)
|
|
{
|
|
struct imx8m_ddrc *priv = dev_get_drvdata(dev);
|
|
struct clk *new_dram_core_parent;
|
|
struct clk *new_dram_alt_parent;
|
|
struct clk *new_dram_apb_parent;
|
|
int ret;
|
|
|
|
/*
|
|
* Fetch new parents
|
|
*
|
|
* new_dram_alt_parent and new_dram_apb_parent are optional but
|
|
* new_dram_core_parent is not.
|
|
*/
|
|
new_dram_core_parent = clk_get_parent_by_index(
|
|
priv->dram_core, freq->dram_core_parent_index - 1);
|
|
if (!new_dram_core_parent) {
|
|
dev_err(dev, "failed to fetch new dram_core parent\n");
|
|
return -EINVAL;
|
|
}
|
|
if (freq->dram_alt_parent_index) {
|
|
new_dram_alt_parent = clk_get_parent_by_index(
|
|
priv->dram_alt,
|
|
freq->dram_alt_parent_index - 1);
|
|
if (!new_dram_alt_parent) {
|
|
dev_err(dev, "failed to fetch new dram_alt parent\n");
|
|
return -EINVAL;
|
|
}
|
|
} else
|
|
new_dram_alt_parent = NULL;
|
|
|
|
if (freq->dram_apb_parent_index) {
|
|
new_dram_apb_parent = clk_get_parent_by_index(
|
|
priv->dram_apb,
|
|
freq->dram_apb_parent_index - 1);
|
|
if (!new_dram_apb_parent) {
|
|
dev_err(dev, "failed to fetch new dram_apb parent\n");
|
|
return -EINVAL;
|
|
}
|
|
} else
|
|
new_dram_apb_parent = NULL;
|
|
|
|
/* increase reference counts and ensure clks are ON before switch */
|
|
ret = clk_prepare_enable(new_dram_core_parent);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable new dram_core parent: %d\n",
|
|
ret);
|
|
goto out;
|
|
}
|
|
ret = clk_prepare_enable(new_dram_alt_parent);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable new dram_alt parent: %d\n",
|
|
ret);
|
|
goto out_disable_core_parent;
|
|
}
|
|
ret = clk_prepare_enable(new_dram_apb_parent);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable new dram_apb parent: %d\n",
|
|
ret);
|
|
goto out_disable_alt_parent;
|
|
}
|
|
|
|
imx8m_ddrc_smc_set_freq(freq->smcarg);
|
|
|
|
/* update parents in clk tree after switch. */
|
|
ret = clk_set_parent(priv->dram_core, new_dram_core_parent);
|
|
if (ret)
|
|
dev_warn(dev, "failed to set dram_core parent: %d\n", ret);
|
|
if (new_dram_alt_parent) {
|
|
ret = clk_set_parent(priv->dram_alt, new_dram_alt_parent);
|
|
if (ret)
|
|
dev_warn(dev, "failed to set dram_alt parent: %d\n",
|
|
ret);
|
|
}
|
|
if (new_dram_apb_parent) {
|
|
ret = clk_set_parent(priv->dram_apb, new_dram_apb_parent);
|
|
if (ret)
|
|
dev_warn(dev, "failed to set dram_apb parent: %d\n",
|
|
ret);
|
|
}
|
|
|
|
/*
|
|
* Explicitly refresh dram PLL rate.
|
|
*
|
|
* Even if it's marked with CLK_GET_RATE_NOCACHE the rate will not be
|
|
* automatically refreshed when clk_get_rate is called on children.
|
|
*/
|
|
clk_get_rate(priv->dram_pll);
|
|
|
|
/*
|
|
* clk_set_parent transfer the reference count from old parent.
|
|
* now we drop extra reference counts used during the switch
|
|
*/
|
|
clk_disable_unprepare(new_dram_apb_parent);
|
|
out_disable_alt_parent:
|
|
clk_disable_unprepare(new_dram_alt_parent);
|
|
out_disable_core_parent:
|
|
clk_disable_unprepare(new_dram_core_parent);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int imx8m_ddrc_target(struct device *dev, unsigned long *freq, u32 flags)
|
|
{
|
|
struct imx8m_ddrc *priv = dev_get_drvdata(dev);
|
|
struct imx8m_ddrc_freq *freq_info;
|
|
struct dev_pm_opp *new_opp;
|
|
unsigned long old_freq, new_freq;
|
|
int ret;
|
|
|
|
new_opp = devfreq_recommended_opp(dev, freq, flags);
|
|
if (IS_ERR(new_opp)) {
|
|
ret = PTR_ERR(new_opp);
|
|
dev_err(dev, "failed to get recommended opp: %d\n", ret);
|
|
return ret;
|
|
}
|
|
dev_pm_opp_put(new_opp);
|
|
|
|
old_freq = clk_get_rate(priv->dram_core);
|
|
if (*freq == old_freq)
|
|
return 0;
|
|
|
|
freq_info = imx8m_ddrc_find_freq(priv, *freq);
|
|
if (!freq_info)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Read back the clk rate to verify switch was correct and so that
|
|
* we can report it on all error paths.
|
|
*/
|
|
ret = imx8m_ddrc_set_freq(dev, freq_info);
|
|
|
|
new_freq = clk_get_rate(priv->dram_core);
|
|
if (ret)
|
|
dev_err(dev, "ddrc failed freq switch to %lu from %lu: error %d. now at %lu\n",
|
|
*freq, old_freq, ret, new_freq);
|
|
else if (*freq != new_freq)
|
|
dev_err(dev, "ddrc failed freq update to %lu from %lu, now at %lu\n",
|
|
*freq, old_freq, new_freq);
|
|
else
|
|
dev_dbg(dev, "ddrc freq set to %lu (was %lu)\n",
|
|
*freq, old_freq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx8m_ddrc_get_cur_freq(struct device *dev, unsigned long *freq)
|
|
{
|
|
struct imx8m_ddrc *priv = dev_get_drvdata(dev);
|
|
|
|
*freq = clk_get_rate(priv->dram_core);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx8m_ddrc_init_freq_info(struct device *dev)
|
|
{
|
|
struct imx8m_ddrc *priv = dev_get_drvdata(dev);
|
|
struct arm_smccc_res res;
|
|
int index;
|
|
|
|
/* An error here means DDR DVFS API not supported by firmware */
|
|
arm_smccc_smc(IMX_SIP_DDR_DVFS, IMX_SIP_DDR_DVFS_GET_FREQ_COUNT,
|
|
0, 0, 0, 0, 0, 0, &res);
|
|
priv->freq_count = res.a0;
|
|
if (priv->freq_count <= 0 ||
|
|
priv->freq_count > IMX8M_DDRC_MAX_FREQ_COUNT)
|
|
return -ENODEV;
|
|
|
|
for (index = 0; index < priv->freq_count; ++index) {
|
|
struct imx8m_ddrc_freq *freq = &priv->freq_table[index];
|
|
|
|
arm_smccc_smc(IMX_SIP_DDR_DVFS, IMX_SIP_DDR_DVFS_GET_FREQ_INFO,
|
|
index, 0, 0, 0, 0, 0, &res);
|
|
/* Result should be strictly positive */
|
|
if ((long)res.a0 <= 0)
|
|
return -ENODEV;
|
|
|
|
freq->rate = res.a0;
|
|
freq->smcarg = index;
|
|
freq->dram_core_parent_index = res.a1;
|
|
freq->dram_alt_parent_index = res.a2;
|
|
freq->dram_apb_parent_index = res.a3;
|
|
|
|
/* dram_core has 2 options: dram_pll or dram_alt_root */
|
|
if (freq->dram_core_parent_index != 1 &&
|
|
freq->dram_core_parent_index != 2)
|
|
return -ENODEV;
|
|
/* dram_apb and dram_alt have exactly 8 possible parents */
|
|
if (freq->dram_alt_parent_index > 8 ||
|
|
freq->dram_apb_parent_index > 8)
|
|
return -ENODEV;
|
|
/* dram_core from alt requires explicit dram_alt parent */
|
|
if (freq->dram_core_parent_index == 2 &&
|
|
freq->dram_alt_parent_index == 0)
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx8m_ddrc_check_opps(struct device *dev)
|
|
{
|
|
struct imx8m_ddrc *priv = dev_get_drvdata(dev);
|
|
struct imx8m_ddrc_freq *freq_info;
|
|
struct dev_pm_opp *opp;
|
|
unsigned long freq;
|
|
int i, opp_count;
|
|
|
|
/* Enumerate DT OPPs and disable those not supported by firmware */
|
|
opp_count = dev_pm_opp_get_opp_count(dev);
|
|
if (opp_count < 0)
|
|
return opp_count;
|
|
for (i = 0, freq = 0; i < opp_count; ++i, ++freq) {
|
|
opp = dev_pm_opp_find_freq_ceil(dev, &freq);
|
|
if (IS_ERR(opp)) {
|
|
dev_err(dev, "Failed enumerating OPPs: %ld\n",
|
|
PTR_ERR(opp));
|
|
return PTR_ERR(opp);
|
|
}
|
|
dev_pm_opp_put(opp);
|
|
|
|
freq_info = imx8m_ddrc_find_freq(priv, freq);
|
|
if (!freq_info) {
|
|
dev_info(dev, "Disable unsupported OPP %luHz %luMT/s\n",
|
|
freq, DIV_ROUND_CLOSEST(freq, 250000));
|
|
dev_pm_opp_disable(dev, freq);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx8m_ddrc_exit(struct device *dev)
|
|
{
|
|
dev_pm_opp_of_remove_table(dev);
|
|
}
|
|
|
|
static int imx8m_ddrc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct imx8m_ddrc *priv;
|
|
const char *gov = DEVFREQ_GOV_USERSPACE;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
ret = imx8m_ddrc_init_freq_info(dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to init firmware freq info: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
priv->dram_core = devm_clk_get(dev, "core");
|
|
if (IS_ERR(priv->dram_core)) {
|
|
ret = PTR_ERR(priv->dram_core);
|
|
dev_err(dev, "failed to fetch core clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
priv->dram_pll = devm_clk_get(dev, "pll");
|
|
if (IS_ERR(priv->dram_pll)) {
|
|
ret = PTR_ERR(priv->dram_pll);
|
|
dev_err(dev, "failed to fetch pll clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
priv->dram_alt = devm_clk_get(dev, "alt");
|
|
if (IS_ERR(priv->dram_alt)) {
|
|
ret = PTR_ERR(priv->dram_alt);
|
|
dev_err(dev, "failed to fetch alt clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
priv->dram_apb = devm_clk_get(dev, "apb");
|
|
if (IS_ERR(priv->dram_apb)) {
|
|
ret = PTR_ERR(priv->dram_apb);
|
|
dev_err(dev, "failed to fetch apb clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = dev_pm_opp_of_add_table(dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to get OPP table\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = imx8m_ddrc_check_opps(dev);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
priv->profile.target = imx8m_ddrc_target;
|
|
priv->profile.exit = imx8m_ddrc_exit;
|
|
priv->profile.get_cur_freq = imx8m_ddrc_get_cur_freq;
|
|
priv->profile.initial_freq = clk_get_rate(priv->dram_core);
|
|
|
|
priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
|
|
gov, NULL);
|
|
if (IS_ERR(priv->devfreq)) {
|
|
ret = PTR_ERR(priv->devfreq);
|
|
dev_err(dev, "failed to add devfreq device: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_pm_opp_of_remove_table(dev);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id imx8m_ddrc_of_match[] = {
|
|
{ .compatible = "fsl,imx8m-ddrc", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx8m_ddrc_of_match);
|
|
|
|
static struct platform_driver imx8m_ddrc_platdrv = {
|
|
.probe = imx8m_ddrc_probe,
|
|
.driver = {
|
|
.name = "imx8m-ddrc-devfreq",
|
|
.of_match_table = imx8m_ddrc_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(imx8m_ddrc_platdrv);
|
|
|
|
MODULE_DESCRIPTION("i.MX8M DDR Controller frequency driver");
|
|
MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
|
|
MODULE_LICENSE("GPL v2");
|