mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
bd4abc2f96
Current code uses num_phys settings to tell the number of entries in phys. Thus remove the NULL terminating entry from phys array which is not necessary. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
402 lines
13 KiB
C
402 lines
13 KiB
C
/*
|
|
* Samsung SoC USB 1.1/2.0 PHY driver - Exynos 5250 support
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* Author: Kamil Debski <k.debski@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include "phy-samsung-usb2.h"
|
|
|
|
/* Exynos USB PHY registers */
|
|
#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0
|
|
#define EXYNOS_5250_REFCLKSEL_XO 0x1
|
|
#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2
|
|
|
|
#define EXYNOS_5250_FSEL_9MHZ6 0x0
|
|
#define EXYNOS_5250_FSEL_10MHZ 0x1
|
|
#define EXYNOS_5250_FSEL_12MHZ 0x2
|
|
#define EXYNOS_5250_FSEL_19MHZ2 0x3
|
|
#define EXYNOS_5250_FSEL_20MHZ 0x4
|
|
#define EXYNOS_5250_FSEL_24MHZ 0x5
|
|
#define EXYNOS_5250_FSEL_50MHZ 0x7
|
|
|
|
/* Normal host */
|
|
#define EXYNOS_5250_HOSTPHYCTRL0 0x0
|
|
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL BIT(31)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \
|
|
(0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \
|
|
(0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN BIT(11)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE BIT(10)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N BIT(9)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ BIT(6)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP BIT(5)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND BIT(4)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE BIT(3)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST BIT(2)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST BIT(1)
|
|
#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST BIT(0)
|
|
|
|
/* HSIC0 & HSIC1 */
|
|
#define EXYNOS_5250_HSICPHYCTRL1 0x10
|
|
#define EXYNOS_5250_HSICPHYCTRL2 0x20
|
|
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_MASK (0x3 << 23)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT (0x2 << 23)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_MASK (0x7f << 16)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 (0x24 << 16)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_15 (0x1c << 16)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_16 (0x1a << 16)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_19_2 (0x15 << 16)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_20 (0x14 << 16)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_SIDDQ BIT(6)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP BIT(5)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND BIT(4)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_WORDINTERFACE BIT(3)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_UTMISWRST BIT(2)
|
|
#define EXYNOS_5250_HSICPHYCTRLX_PHYSWRST BIT(0)
|
|
|
|
/* EHCI control */
|
|
#define EXYNOS_5250_HOSTEHCICTRL 0x30
|
|
#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN BIT(29)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 BIT(28)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 BIT(27)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 BIT(26)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN BIT(25)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
|
|
(0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \
|
|
(0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
|
|
(0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1
|
|
#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \
|
|
(0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT)
|
|
#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE BIT(0)
|
|
|
|
/* OHCI control */
|
|
#define EXYNOS_5250_HOSTOHCICTRL 0x34
|
|
#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1
|
|
#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \
|
|
(0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT)
|
|
#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN BIT(0)
|
|
|
|
/* USBOTG */
|
|
#define EXYNOS_5250_USBOTGSYS 0x38
|
|
#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET BIT(14)
|
|
#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG BIT(13)
|
|
#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST BIT(12)
|
|
#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9
|
|
#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \
|
|
(0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT)
|
|
#define EXYNOS_5250_USBOTGSYS_ID_PULLUP BIT(8)
|
|
#define EXYNOS_5250_USBOTGSYS_COMMON_ON BIT(7)
|
|
#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4
|
|
#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \
|
|
(0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT)
|
|
#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP BIT(3)
|
|
#define EXYNOS_5250_USBOTGSYS_OTGDISABLE BIT(2)
|
|
#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG BIT(1)
|
|
#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND BIT(0)
|
|
|
|
/* Isolation, configured in the power management unit */
|
|
#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704
|
|
#define EXYNOS_5250_USB_ISOL_OTG BIT(0)
|
|
#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708
|
|
#define EXYNOS_5250_USB_ISOL_HOST BIT(0)
|
|
|
|
/* Mode swtich register */
|
|
#define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230
|
|
#define EXYNOS_5250_MODE_SWITCH_MASK 1
|
|
#define EXYNOS_5250_MODE_SWITCH_DEVICE 0
|
|
#define EXYNOS_5250_MODE_SWITCH_HOST 1
|
|
|
|
enum exynos4x12_phy_id {
|
|
EXYNOS5250_DEVICE,
|
|
EXYNOS5250_HOST,
|
|
EXYNOS5250_HSIC0,
|
|
EXYNOS5250_HSIC1,
|
|
EXYNOS5250_NUM_PHYS,
|
|
};
|
|
|
|
/*
|
|
* exynos5250_rate_to_clk() converts the supplied clock rate to the value that
|
|
* can be written to the phy register.
|
|
*/
|
|
static int exynos5250_rate_to_clk(unsigned long rate, u32 *reg)
|
|
{
|
|
/* EXYNOS_5250_FSEL_MASK */
|
|
|
|
switch (rate) {
|
|
case 9600 * KHZ:
|
|
*reg = EXYNOS_5250_FSEL_9MHZ6;
|
|
break;
|
|
case 10 * MHZ:
|
|
*reg = EXYNOS_5250_FSEL_10MHZ;
|
|
break;
|
|
case 12 * MHZ:
|
|
*reg = EXYNOS_5250_FSEL_12MHZ;
|
|
break;
|
|
case 19200 * KHZ:
|
|
*reg = EXYNOS_5250_FSEL_19MHZ2;
|
|
break;
|
|
case 20 * MHZ:
|
|
*reg = EXYNOS_5250_FSEL_20MHZ;
|
|
break;
|
|
case 24 * MHZ:
|
|
*reg = EXYNOS_5250_FSEL_24MHZ;
|
|
break;
|
|
case 50 * MHZ:
|
|
*reg = EXYNOS_5250_FSEL_50MHZ;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 offset;
|
|
u32 mask;
|
|
|
|
switch (inst->cfg->id) {
|
|
case EXYNOS5250_DEVICE:
|
|
offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
|
|
mask = EXYNOS_5250_USB_ISOL_OTG;
|
|
break;
|
|
case EXYNOS5250_HOST:
|
|
offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
|
|
mask = EXYNOS_5250_USB_ISOL_HOST;
|
|
break;
|
|
default:
|
|
return;
|
|
};
|
|
|
|
regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
|
|
}
|
|
|
|
static int exynos5250_power_on(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 ctrl0;
|
|
u32 otg;
|
|
u32 ehci;
|
|
u32 ohci;
|
|
u32 hsic;
|
|
|
|
switch (inst->cfg->id) {
|
|
case EXYNOS5250_DEVICE:
|
|
regmap_update_bits(drv->reg_sys,
|
|
EXYNOS_5250_MODE_SWITCH_OFFSET,
|
|
EXYNOS_5250_MODE_SWITCH_MASK,
|
|
EXYNOS_5250_MODE_SWITCH_DEVICE);
|
|
|
|
/* OTG configuration */
|
|
otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
|
|
/* The clock */
|
|
otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
|
|
otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
|
|
/* Reset */
|
|
otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
|
|
EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
|
|
EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
|
|
otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
|
|
EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
|
|
EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
|
|
EXYNOS_5250_USBOTGSYS_OTGDISABLE;
|
|
/* Ref clock */
|
|
otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
|
|
otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
|
|
EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
|
|
writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
|
|
udelay(100);
|
|
otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
|
|
EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
|
|
EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
|
|
EXYNOS_5250_USBOTGSYS_OTGDISABLE);
|
|
writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
|
|
|
|
|
|
break;
|
|
case EXYNOS5250_HOST:
|
|
case EXYNOS5250_HSIC0:
|
|
case EXYNOS5250_HSIC1:
|
|
/* Host registers configuration */
|
|
ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
|
|
/* The clock */
|
|
ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK;
|
|
ctrl0 |= drv->ref_reg_val <<
|
|
EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT;
|
|
|
|
/* Reset */
|
|
ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
|
|
EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL |
|
|
EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
|
|
EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
|
|
EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP);
|
|
ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
|
|
EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST |
|
|
EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N;
|
|
writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
|
|
udelay(10);
|
|
ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
|
|
EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST);
|
|
writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
|
|
|
|
/* OTG configuration */
|
|
otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
|
|
/* The clock */
|
|
otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
|
|
otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
|
|
/* Reset */
|
|
otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
|
|
EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
|
|
EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
|
|
otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
|
|
EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
|
|
EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
|
|
EXYNOS_5250_USBOTGSYS_OTGDISABLE;
|
|
/* Ref clock */
|
|
otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
|
|
otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
|
|
EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
|
|
writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
|
|
udelay(10);
|
|
otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
|
|
EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
|
|
EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
|
|
|
|
/* HSIC phy configuration */
|
|
hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 |
|
|
EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT |
|
|
EXYNOS_5250_HSICPHYCTRLX_PHYSWRST);
|
|
writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
|
|
writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
|
|
udelay(10);
|
|
hsic &= ~EXYNOS_5250_HSICPHYCTRLX_PHYSWRST;
|
|
writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
|
|
writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
|
|
/* The following delay is necessary for the reset sequence to be
|
|
* completed */
|
|
udelay(80);
|
|
|
|
/* Enable EHCI DMA burst */
|
|
ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
|
|
ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN |
|
|
EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 |
|
|
EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 |
|
|
EXYNOS_5250_HOSTEHCICTRL_ENAINCR16;
|
|
writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
|
|
|
|
/* OHCI settings */
|
|
ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
|
|
/* Following code is based on the old driver */
|
|
ohci |= 0x1 << 3;
|
|
writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
|
|
|
|
break;
|
|
}
|
|
exynos5250_isol(inst, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos5250_power_off(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 ctrl0;
|
|
u32 otg;
|
|
u32 hsic;
|
|
|
|
exynos5250_isol(inst, 1);
|
|
|
|
switch (inst->cfg->id) {
|
|
case EXYNOS5250_DEVICE:
|
|
otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
|
|
otg |= (EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
|
|
EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG |
|
|
EXYNOS_5250_USBOTGSYS_FORCE_SLEEP);
|
|
writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
|
|
break;
|
|
case EXYNOS5250_HOST:
|
|
ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
|
|
ctrl0 |= (EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
|
|
EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
|
|
EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP |
|
|
EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
|
|
EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL);
|
|
writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
|
|
break;
|
|
case EXYNOS5250_HSIC0:
|
|
case EXYNOS5250_HSIC1:
|
|
hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 |
|
|
EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT |
|
|
EXYNOS_5250_HSICPHYCTRLX_SIDDQ |
|
|
EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP |
|
|
EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND
|
|
);
|
|
writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
|
|
writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct samsung_usb2_common_phy exynos5250_phys[] = {
|
|
{
|
|
.label = "device",
|
|
.id = EXYNOS5250_DEVICE,
|
|
.power_on = exynos5250_power_on,
|
|
.power_off = exynos5250_power_off,
|
|
},
|
|
{
|
|
.label = "host",
|
|
.id = EXYNOS5250_HOST,
|
|
.power_on = exynos5250_power_on,
|
|
.power_off = exynos5250_power_off,
|
|
},
|
|
{
|
|
.label = "hsic0",
|
|
.id = EXYNOS5250_HSIC0,
|
|
.power_on = exynos5250_power_on,
|
|
.power_off = exynos5250_power_off,
|
|
},
|
|
{
|
|
.label = "hsic1",
|
|
.id = EXYNOS5250_HSIC1,
|
|
.power_on = exynos5250_power_on,
|
|
.power_off = exynos5250_power_off,
|
|
},
|
|
};
|
|
|
|
const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = {
|
|
.has_mode_switch = 1,
|
|
.num_phys = EXYNOS5250_NUM_PHYS,
|
|
.phys = exynos5250_phys,
|
|
.rate_to_clk = exynos5250_rate_to_clk,
|
|
};
|