mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
fba51482b6
New device support * bosch,bmp280 - Add support for BMP580 - includes significant refactoring and general driver cleanup + support for non-volatile memory for trimming and config parameters. * rohm BU27034 - New driver for this 3 channel ambient light sensor. - New support library for devices where both integration time and amplifier gain are configurable. In these cases a scale change may require changing bother underlying values. This library module provides code to help with this. * st,accel - Add support for IIS328DQ (ID only as compatible wtih LIS331DL) * st,lsm6dsx - Add support for ASM330LHB automotive MEMS sensor. * ti,ads1100, ads1000 - New driver for these 16 bit ADCs. * ti,tmp117 - Add support for older tmp116 device. Includes some general driver cleanup. Staging driver drops * adi,ade7854 - Driver was a very long way from compliant with IIO infrastructure and ABI. If anyone wants a non staging version of this driver they are better off starting from scratch. Hence drop it and the associated meter.h header. Features * adi,ad7441r - Add DT binding to set sink current for digital input. * semtech,sx9324,9360 - Support older register mapping from firmware designed for windows. Core improvements. * Move iio_trigger_poll() docs to next to the implementation and add a note on expected caller context. * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so as to use more standard / common terminology. * Improve main ABI docs references to offset and scale for raw values by making them consistent and clear. Cleanups and minor fixes: * adi,ad5592r - Add GPIO names - useful for debug. * adi,ad7441r - Fix current input, loop powered mode configuration setup. * adi,adis16475 - Fix wrong commented value for minimum advised lower rate. * adi,admv1013 - Use devm_clk_get_enabled() to reduce boilerplate. * adi,ads1210 - Fix wrong bits for writing config register (late fix and has been broken a long time so not rushed upstream) * amlogic,meson-saradc - Improve cleanup in error handling if BL30 handshake fails. * apex-embedded,stx104 - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle retries. - Add local mutex to close various races. - Use define U16_MAX rather than value for limit. - Improve code readability with minor reorganization. * atmel,ad91-sama5d2 - Drop trivial dead code. * kionix,kx022a - Drop unused structure element. * linear,ltc2983 - Reorganize bindings doc to enable unevaluatedProperties to be set in one place for all child nodes. - Make binding for adi,custom-thermocouple accept signed values. * maxim,max44000 - Add OF Device matching (of_match_table was not correctly set). * maxim,max5522 - Missing static * measurement-computing,cio-dac - Fix wrong part name in comments. - Migrate to regmap. - Improve includes by replacing bitops.h with more direct bits.h * qcom,pm8xxx-xoadc - Remove a check that can never fail. * renesas,rcar-gyroadc - DT binding documentation improvements. - Tidy up an unused warning with __maybe_unused. * semtech,sx_common - Drop docs for a structure element that doesn't exist. * semtech,sx9500 - Drop ACPI_PTR() and of_match_ptr() protections that just complicate the code / block some firmware registration types that would otherwise work. * sensiron,sps30 - Comment formatting tidy up. * st,sensors - Drop duplicate text in DT binding. * st,stm32-adc - Add some missing static markings. * ti,ads1100 - Use correct return code in dev_err_probe() call. * x-powers,axp20x_adc - precursor series to simplify addition of AXP192. - General code cleanup / minor refactoring for better readabilty of code. - Switch from boolean value to mask for adc_en2 field to avoid hard coding a mask that will be different in AXP192 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmQ0QiIRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Foh8dhAAlUDsEWKoYc2DMXs//UVh5ortcD/tVMDj +Oe6c92vTvZaritF9JN5fS5oO48d2Qx7VC8mIZvsCgLdloYtM8qns8KwPU8W589j Mdaq2e/p+CCVLxn+RttiINk7C/okXmc6nh21TABYgaHbi1Yzu0LooTobrdd5GHZX l+5n8diTgebkKWLKHtR/Wo0hZVdFtrxOb+bP6Lu+yjwUhlvmnuC18OPthDHBwss1 3nWL5sAR8DWKTKPwmWl1pnn5fuZXxAnxYhsgzMiC/dNrv4GfjV76xFvwdFG97Qc4 Qifo/t6AM6g7HplfRjtdGXGnew8RBj9jzw3W8NUzb/7UF0ywF+6KHBrgWVKLumsW uGsLGQsOoCVmycnppUZSZV0eI5qT+WS6GT0XucB3wlUriS56YgpMU/RVo9iE8yUd VqjacBJrh1SUIPQKXAGb1dlrfgxGRUFcDxea/XuqzXZIn4U3JM1wb0awIlfcrTNm 4EdVH9r6lwU/7KcrVC10iZz5ZMFy15wNmCl4+Sn56QNIekXYMXFCHsoZs64UMuhU leczQdEp/wEG1p0mWdrpC4aEsMfK27RSbTh8AS3LiPHqI9FD+Jg+wULF6wpMIHvY rm4kxlznTdKsYOiHsOkYXCi06kS5k2SqQHtbKS3jiSsCw30eX6xzVjG8szivFIS5 KEKqxRs1BxM= =xxs6 -----END PGP SIGNATURE----- Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanups for the 6.4 cycle. New device support * bosch,bmp280 - Add support for BMP580 - includes significant refactoring and general driver cleanup + support for non-volatile memory for trimming and config parameters. * rohm BU27034 - New driver for this 3 channel ambient light sensor. - New support library for devices where both integration time and amplifier gain are configurable. In these cases a scale change may require changing bother underlying values. This library module provides code to help with this. * st,accel - Add support for IIS328DQ (ID only as compatible wtih LIS331DL) * st,lsm6dsx - Add support for ASM330LHB automotive MEMS sensor. * ti,ads1100, ads1000 - New driver for these 16 bit ADCs. * ti,tmp117 - Add support for older tmp116 device. Includes some general driver cleanup. Staging driver drops * adi,ade7854 - Driver was a very long way from compliant with IIO infrastructure and ABI. If anyone wants a non staging version of this driver they are better off starting from scratch. Hence drop it and the associated meter.h header. Features * adi,ad7441r - Add DT binding to set sink current for digital input. * semtech,sx9324,9360 - Support older register mapping from firmware designed for windows. Core improvements. * Move iio_trigger_poll() docs to next to the implementation and add a note on expected caller context. * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so as to use more standard / common terminology. * Improve main ABI docs references to offset and scale for raw values by making them consistent and clear. Cleanups and minor fixes: * adi,ad5592r - Add GPIO names - useful for debug. * adi,ad7441r - Fix current input, loop powered mode configuration setup. * adi,adis16475 - Fix wrong commented value for minimum advised lower rate. * adi,admv1013 - Use devm_clk_get_enabled() to reduce boilerplate. * adi,ads1210 - Fix wrong bits for writing config register (late fix and has been broken a long time so not rushed upstream) * amlogic,meson-saradc - Improve cleanup in error handling if BL30 handshake fails. * apex-embedded,stx104 - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle retries. - Add local mutex to close various races. - Use define U16_MAX rather than value for limit. - Improve code readability with minor reorganization. * atmel,ad91-sama5d2 - Drop trivial dead code. * kionix,kx022a - Drop unused structure element. * linear,ltc2983 - Reorganize bindings doc to enable unevaluatedProperties to be set in one place for all child nodes. - Make binding for adi,custom-thermocouple accept signed values. * maxim,max44000 - Add OF Device matching (of_match_table was not correctly set). * maxim,max5522 - Missing static * measurement-computing,cio-dac - Fix wrong part name in comments. - Migrate to regmap. - Improve includes by replacing bitops.h with more direct bits.h * qcom,pm8xxx-xoadc - Remove a check that can never fail. * renesas,rcar-gyroadc - DT binding documentation improvements. - Tidy up an unused warning with __maybe_unused. * semtech,sx_common - Drop docs for a structure element that doesn't exist. * semtech,sx9500 - Drop ACPI_PTR() and of_match_ptr() protections that just complicate the code / block some firmware registration types that would otherwise work. * sensiron,sps30 - Comment formatting tidy up. * st,sensors - Drop duplicate text in DT binding. * st,stm32-adc - Add some missing static markings. * ti,ads1100 - Use correct return code in dev_err_probe() call. * x-powers,axp20x_adc - precursor series to simplify addition of AXP192. - General code cleanup / minor refactoring for better readabilty of code. - Switch from boolean value to mask for adc_en2 field to avoid hard coding a mask that will be different in AXP192 * tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits) MAINTAINERS: Add ROHM BU27034 iio: light: ROHM BU27034 Ambient Light Sensor dt-bindings: iio: light: Support ROHM BU27034 MAINTAINERS: Add IIO gain-time-scale helpers iio: light: Add gain-time-scale helpers doc: Make sysfs-bus-iio doc more exact iio: dac: set variable max5522_channels storage-class-specifier to static dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll iio: addac: stx104: Migrate to the regmap API iio: addac: stx104: Improve indentation in stx104_write_raw() iio: addac: stx104: Use define rather than hardcoded limit for write val iio: addac: stx104: Fix race condition when converting analog-to-digital iio: addac: stx104: Fix race condition for stx104_write_raw() dt-bindings: iio: st-sensors: Fix repeated text staging: iio: resolver: ads1210: fix config mode iio: adc: ti-ads1100: fix error code in probe() iio: accel: add support for IIS328DQ variant dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer ...
1060 lines
27 KiB
C
1060 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MAX11410 SPI ADC driver
|
|
*
|
|
* Copyright 2022 Analog Devices Inc.
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#define MAX11410_REG_CONV_START 0x01
|
|
#define MAX11410_CONV_TYPE_SINGLE 0x00
|
|
#define MAX11410_CONV_TYPE_CONTINUOUS 0x01
|
|
#define MAX11410_REG_CAL_START 0x03
|
|
#define MAX11410_CAL_START_SELF 0x00
|
|
#define MAX11410_CAL_START_PGA 0x01
|
|
#define MAX11410_REG_GPIO_CTRL(ch) ((ch) ? 0x05 : 0x04)
|
|
#define MAX11410_GPIO_INTRB 0xC1
|
|
#define MAX11410_REG_FILTER 0x08
|
|
#define MAX11410_FILTER_RATE_MASK GENMASK(3, 0)
|
|
#define MAX11410_FILTER_RATE_MAX 0x0F
|
|
#define MAX11410_FILTER_LINEF_MASK GENMASK(5, 4)
|
|
#define MAX11410_FILTER_50HZ BIT(5)
|
|
#define MAX11410_FILTER_60HZ BIT(4)
|
|
#define MAX11410_REG_CTRL 0x09
|
|
#define MAX11410_CTRL_REFSEL_MASK GENMASK(2, 0)
|
|
#define MAX11410_CTRL_VREFN_BUF_BIT BIT(3)
|
|
#define MAX11410_CTRL_VREFP_BUF_BIT BIT(4)
|
|
#define MAX11410_CTRL_FORMAT_BIT BIT(5)
|
|
#define MAX11410_CTRL_UNIPOLAR_BIT BIT(6)
|
|
#define MAX11410_REG_MUX_CTRL0 0x0B
|
|
#define MAX11410_REG_PGA 0x0E
|
|
#define MAX11410_PGA_GAIN_MASK GENMASK(2, 0)
|
|
#define MAX11410_PGA_SIG_PATH_MASK GENMASK(5, 4)
|
|
#define MAX11410_PGA_SIG_PATH_BUFFERED 0x00
|
|
#define MAX11410_PGA_SIG_PATH_BYPASS 0x01
|
|
#define MAX11410_PGA_SIG_PATH_PGA 0x02
|
|
#define MAX11410_REG_DATA0 0x30
|
|
#define MAX11410_REG_STATUS 0x38
|
|
#define MAX11410_STATUS_CONV_READY_BIT BIT(0)
|
|
#define MAX11410_STATUS_CAL_READY_BIT BIT(2)
|
|
|
|
#define MAX11410_REFSEL_AVDD_AGND 0x03
|
|
#define MAX11410_REFSEL_MAX 0x06
|
|
#define MAX11410_SIG_PATH_MAX 0x02
|
|
#define MAX11410_CHANNEL_INDEX_MAX 0x0A
|
|
#define MAX11410_AINP_AVDD 0x0A
|
|
#define MAX11410_AINN_GND 0x0A
|
|
|
|
#define MAX11410_CONVERSION_TIMEOUT_MS 2000
|
|
#define MAX11410_CALIB_TIMEOUT_MS 2000
|
|
|
|
#define MAX11410_SCALE_AVAIL_SIZE 8
|
|
|
|
enum max11410_filter {
|
|
MAX11410_FILTER_FIR5060,
|
|
MAX11410_FILTER_FIR50,
|
|
MAX11410_FILTER_FIR60,
|
|
MAX11410_FILTER_SINC4,
|
|
};
|
|
|
|
static const u8 max11410_sampling_len[] = {
|
|
[MAX11410_FILTER_FIR5060] = 5,
|
|
[MAX11410_FILTER_FIR50] = 6,
|
|
[MAX11410_FILTER_FIR60] = 6,
|
|
[MAX11410_FILTER_SINC4] = 10,
|
|
};
|
|
|
|
static const int max11410_sampling_rates[4][10][2] = {
|
|
[MAX11410_FILTER_FIR5060] = {
|
|
{ 1, 100000 },
|
|
{ 2, 100000 },
|
|
{ 4, 200000 },
|
|
{ 8, 400000 },
|
|
{ 16, 800000 }
|
|
},
|
|
[MAX11410_FILTER_FIR50] = {
|
|
{ 1, 300000 },
|
|
{ 2, 700000 },
|
|
{ 5, 300000 },
|
|
{ 10, 700000 },
|
|
{ 21, 300000 },
|
|
{ 40 }
|
|
},
|
|
[MAX11410_FILTER_FIR60] = {
|
|
{ 1, 300000 },
|
|
{ 2, 700000 },
|
|
{ 5, 300000 },
|
|
{ 10, 700000 },
|
|
{ 21, 300000 },
|
|
{ 40 }
|
|
},
|
|
[MAX11410_FILTER_SINC4] = {
|
|
{ 4 },
|
|
{ 10 },
|
|
{ 20 },
|
|
{ 40 },
|
|
{ 60 },
|
|
{ 120 },
|
|
{ 240 },
|
|
{ 480 },
|
|
{ 960 },
|
|
{ 1920 }
|
|
}
|
|
};
|
|
|
|
struct max11410_channel_config {
|
|
u32 settling_time_us;
|
|
u32 *scale_avail;
|
|
u8 refsel;
|
|
u8 sig_path;
|
|
u8 gain;
|
|
bool bipolar;
|
|
bool buffered_vrefp;
|
|
bool buffered_vrefn;
|
|
};
|
|
|
|
struct max11410_state {
|
|
struct spi_device *spi_dev;
|
|
struct iio_trigger *trig;
|
|
struct completion completion;
|
|
struct mutex lock; /* Prevent changing channel config during sampling */
|
|
struct regmap *regmap;
|
|
struct regulator *avdd;
|
|
struct regulator *vrefp[3];
|
|
struct regulator *vrefn[3];
|
|
struct max11410_channel_config *channels;
|
|
int irq;
|
|
struct {
|
|
u32 data __aligned(IIO_DMA_MINALIGN);
|
|
s64 ts __aligned(8);
|
|
} scan;
|
|
};
|
|
|
|
static const struct iio_chan_spec chanspec_template = {
|
|
.type = IIO_VOLTAGE,
|
|
.indexed = 1,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
|
.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
|
.scan_type = {
|
|
.sign = 's',
|
|
.realbits = 24,
|
|
.storagebits = 32,
|
|
.endianness = IIO_LE,
|
|
},
|
|
};
|
|
|
|
static unsigned int max11410_reg_size(unsigned int reg)
|
|
{
|
|
/* Registers from 0x00 to 0x10 are 1 byte, the rest are 3 bytes long. */
|
|
return reg <= 0x10 ? 1 : 3;
|
|
}
|
|
|
|
static int max11410_write_reg(struct max11410_state *st, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
/* This driver only needs to write 8-bit registers */
|
|
if (max11410_reg_size(reg) != 1)
|
|
return -EINVAL;
|
|
|
|
return regmap_write(st->regmap, reg, val);
|
|
}
|
|
|
|
static int max11410_read_reg(struct max11410_state *st, unsigned int reg,
|
|
int *val)
|
|
{
|
|
int ret;
|
|
|
|
if (max11410_reg_size(reg) == 3) {
|
|
ret = regmap_bulk_read(st->regmap, reg, &st->scan.data, 3);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = get_unaligned_be24(&st->scan.data);
|
|
return 0;
|
|
}
|
|
|
|
return regmap_read(st->regmap, reg, val);
|
|
}
|
|
|
|
static struct regulator *max11410_get_vrefp(struct max11410_state *st,
|
|
u8 refsel)
|
|
{
|
|
refsel = refsel % 4;
|
|
if (refsel == 3)
|
|
return st->avdd;
|
|
|
|
return st->vrefp[refsel];
|
|
}
|
|
|
|
static struct regulator *max11410_get_vrefn(struct max11410_state *st,
|
|
u8 refsel)
|
|
{
|
|
if (refsel > 2)
|
|
return NULL;
|
|
|
|
return st->vrefn[refsel];
|
|
}
|
|
|
|
static const struct regmap_config regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0x39,
|
|
};
|
|
|
|
static ssize_t max11410_notch_en_show(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct max11410_state *state = iio_priv(indio_dev);
|
|
struct iio_dev_attr *iio_attr = to_iio_dev_attr(devattr);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = max11410_read_reg(state, MAX11410_REG_FILTER, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (iio_attr->address) {
|
|
case 0:
|
|
val = !FIELD_GET(MAX11410_FILTER_50HZ, val);
|
|
break;
|
|
case 1:
|
|
val = !FIELD_GET(MAX11410_FILTER_60HZ, val);
|
|
break;
|
|
case 2:
|
|
val = FIELD_GET(MAX11410_FILTER_LINEF_MASK, val) == 3;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return sysfs_emit(buf, "%d\n", val);
|
|
}
|
|
|
|
static ssize_t max11410_notch_en_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct iio_dev_attr *iio_attr = to_iio_dev_attr(devattr);
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct max11410_state *state = iio_priv(indio_dev);
|
|
unsigned int filter_bits;
|
|
bool enable;
|
|
int ret;
|
|
|
|
ret = kstrtobool(buf, &enable);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (iio_attr->address) {
|
|
case 0:
|
|
filter_bits = MAX11410_FILTER_50HZ;
|
|
break;
|
|
case 1:
|
|
filter_bits = MAX11410_FILTER_60HZ;
|
|
break;
|
|
case 2:
|
|
default:
|
|
filter_bits = MAX11410_FILTER_50HZ | MAX11410_FILTER_60HZ;
|
|
enable = !enable;
|
|
break;
|
|
}
|
|
|
|
if (enable)
|
|
ret = regmap_clear_bits(state->regmap, MAX11410_REG_FILTER,
|
|
filter_bits);
|
|
else
|
|
ret = regmap_set_bits(state->regmap, MAX11410_REG_FILTER,
|
|
filter_bits);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t in_voltage_filter2_notch_center_show(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct max11410_state *state = iio_priv(indio_dev);
|
|
int ret, reg, rate, filter;
|
|
|
|
ret = regmap_read(state->regmap, MAX11410_REG_FILTER, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rate = FIELD_GET(MAX11410_FILTER_RATE_MASK, reg);
|
|
rate = clamp_val(rate, 0,
|
|
max11410_sampling_len[MAX11410_FILTER_SINC4] - 1);
|
|
filter = max11410_sampling_rates[MAX11410_FILTER_SINC4][rate][0];
|
|
|
|
return sysfs_emit(buf, "%d\n", filter);
|
|
}
|
|
|
|
static IIO_CONST_ATTR(in_voltage_filter0_notch_center, "50");
|
|
static IIO_CONST_ATTR(in_voltage_filter1_notch_center, "60");
|
|
static IIO_DEVICE_ATTR_RO(in_voltage_filter2_notch_center, 2);
|
|
|
|
static IIO_DEVICE_ATTR(in_voltage_filter0_notch_en, 0644,
|
|
max11410_notch_en_show, max11410_notch_en_store, 0);
|
|
static IIO_DEVICE_ATTR(in_voltage_filter1_notch_en, 0644,
|
|
max11410_notch_en_show, max11410_notch_en_store, 1);
|
|
static IIO_DEVICE_ATTR(in_voltage_filter2_notch_en, 0644,
|
|
max11410_notch_en_show, max11410_notch_en_store, 2);
|
|
|
|
static struct attribute *max11410_attributes[] = {
|
|
&iio_const_attr_in_voltage_filter0_notch_center.dev_attr.attr,
|
|
&iio_const_attr_in_voltage_filter1_notch_center.dev_attr.attr,
|
|
&iio_dev_attr_in_voltage_filter2_notch_center.dev_attr.attr,
|
|
&iio_dev_attr_in_voltage_filter0_notch_en.dev_attr.attr,
|
|
&iio_dev_attr_in_voltage_filter1_notch_en.dev_attr.attr,
|
|
&iio_dev_attr_in_voltage_filter2_notch_en.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group max11410_attribute_group = {
|
|
.attrs = max11410_attributes,
|
|
};
|
|
|
|
static int max11410_set_input_mux(struct max11410_state *st, u8 ainp, u8 ainn)
|
|
{
|
|
if (ainp > MAX11410_CHANNEL_INDEX_MAX ||
|
|
ainn > MAX11410_CHANNEL_INDEX_MAX)
|
|
return -EINVAL;
|
|
|
|
return max11410_write_reg(st, MAX11410_REG_MUX_CTRL0,
|
|
(ainp << 4) | ainn);
|
|
}
|
|
|
|
static int max11410_configure_channel(struct max11410_state *st,
|
|
struct iio_chan_spec const *chan)
|
|
{
|
|
struct max11410_channel_config cfg = st->channels[chan->address];
|
|
unsigned int regval;
|
|
int ret;
|
|
|
|
if (chan->differential)
|
|
ret = max11410_set_input_mux(st, chan->channel, chan->channel2);
|
|
else
|
|
ret = max11410_set_input_mux(st, chan->channel,
|
|
MAX11410_AINN_GND);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
regval = FIELD_PREP(MAX11410_CTRL_VREFP_BUF_BIT, cfg.buffered_vrefp) |
|
|
FIELD_PREP(MAX11410_CTRL_VREFN_BUF_BIT, cfg.buffered_vrefn) |
|
|
FIELD_PREP(MAX11410_CTRL_REFSEL_MASK, cfg.refsel) |
|
|
FIELD_PREP(MAX11410_CTRL_UNIPOLAR_BIT, cfg.bipolar ? 0 : 1);
|
|
ret = regmap_update_bits(st->regmap, MAX11410_REG_CTRL,
|
|
MAX11410_CTRL_REFSEL_MASK |
|
|
MAX11410_CTRL_VREFP_BUF_BIT |
|
|
MAX11410_CTRL_VREFN_BUF_BIT |
|
|
MAX11410_CTRL_UNIPOLAR_BIT, regval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regval = FIELD_PREP(MAX11410_PGA_SIG_PATH_MASK, cfg.sig_path) |
|
|
FIELD_PREP(MAX11410_PGA_GAIN_MASK, cfg.gain);
|
|
ret = regmap_write(st->regmap, MAX11410_REG_PGA, regval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (cfg.settling_time_us)
|
|
fsleep(cfg.settling_time_us);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max11410_sample(struct max11410_state *st, int *sample_raw,
|
|
struct iio_chan_spec const *chan)
|
|
{
|
|
int val, ret;
|
|
|
|
ret = max11410_configure_channel(st, chan);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (st->irq > 0)
|
|
reinit_completion(&st->completion);
|
|
|
|
/* Start Conversion */
|
|
ret = max11410_write_reg(st, MAX11410_REG_CONV_START,
|
|
MAX11410_CONV_TYPE_SINGLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (st->irq > 0) {
|
|
/* Wait for an interrupt. */
|
|
ret = wait_for_completion_timeout(&st->completion,
|
|
msecs_to_jiffies(MAX11410_CONVERSION_TIMEOUT_MS));
|
|
if (!ret)
|
|
return -ETIMEDOUT;
|
|
} else {
|
|
int ret2;
|
|
|
|
/* Wait for status register Conversion Ready flag */
|
|
ret = read_poll_timeout(max11410_read_reg, ret2,
|
|
ret2 || (val & MAX11410_STATUS_CONV_READY_BIT),
|
|
5000, MAX11410_CONVERSION_TIMEOUT_MS * 1000,
|
|
true, st, MAX11410_REG_STATUS, &val);
|
|
if (ret)
|
|
return ret;
|
|
if (ret2)
|
|
return ret2;
|
|
}
|
|
|
|
/* Read ADC Data */
|
|
return max11410_read_reg(st, MAX11410_REG_DATA0, sample_raw);
|
|
}
|
|
|
|
static int max11410_get_scale(struct max11410_state *state,
|
|
struct max11410_channel_config cfg)
|
|
{
|
|
struct regulator *vrefp, *vrefn;
|
|
int scale;
|
|
|
|
vrefp = max11410_get_vrefp(state, cfg.refsel);
|
|
|
|
scale = regulator_get_voltage(vrefp) / 1000;
|
|
vrefn = max11410_get_vrefn(state, cfg.refsel);
|
|
if (vrefn)
|
|
scale -= regulator_get_voltage(vrefn) / 1000;
|
|
|
|
if (cfg.bipolar)
|
|
scale *= 2;
|
|
|
|
return scale >> cfg.gain;
|
|
}
|
|
|
|
static int max11410_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long info)
|
|
{
|
|
struct max11410_state *state = iio_priv(indio_dev);
|
|
struct max11410_channel_config cfg = state->channels[chan->address];
|
|
int ret, reg_val, filter, rate;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = max11410_get_scale(state, cfg);
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
if (cfg.bipolar)
|
|
*val = -BIT(chan->scan_type.realbits - 1);
|
|
else
|
|
*val = 0;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&state->lock);
|
|
|
|
ret = max11410_sample(state, ®_val, chan);
|
|
|
|
mutex_unlock(&state->lock);
|
|
|
|
iio_device_release_direct_mode(indio_dev);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = reg_val;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = regmap_read(state->regmap, MAX11410_REG_FILTER, ®_val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
filter = FIELD_GET(MAX11410_FILTER_LINEF_MASK, reg_val);
|
|
rate = reg_val & MAX11410_FILTER_RATE_MASK;
|
|
if (rate >= max11410_sampling_len[filter])
|
|
rate = max11410_sampling_len[filter] - 1;
|
|
|
|
*val = max11410_sampling_rates[filter][rate][0];
|
|
*val2 = max11410_sampling_rates[filter][rate][1];
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int max11410_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct max11410_state *st = iio_priv(indio_dev);
|
|
int i, ret, reg_val, filter, gain;
|
|
u32 *scale_avail;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
scale_avail = st->channels[chan->address].scale_avail;
|
|
if (!scale_avail)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* Accept values in range 0.000001 <= scale < 1.000000 */
|
|
if (val != 0 || val2 == 0)
|
|
return -EINVAL;
|
|
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Convert from INT_PLUS_MICRO to FRACTIONAL_LOG2 */
|
|
val2 = val2 * DIV_ROUND_CLOSEST(BIT(24), 1000000);
|
|
val2 = DIV_ROUND_CLOSEST(scale_avail[0], val2);
|
|
gain = order_base_2(val2);
|
|
|
|
st->channels[chan->address].gain = clamp_val(gain, 0, 7);
|
|
|
|
iio_device_release_direct_mode(indio_dev);
|
|
|
|
return 0;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
|
|
ret = regmap_read(st->regmap, MAX11410_REG_FILTER, ®_val);
|
|
if (ret)
|
|
goto out;
|
|
|
|
filter = FIELD_GET(MAX11410_FILTER_LINEF_MASK, reg_val);
|
|
|
|
for (i = 0; i < max11410_sampling_len[filter]; ++i) {
|
|
if (val == max11410_sampling_rates[filter][i][0] &&
|
|
val2 == max11410_sampling_rates[filter][i][1])
|
|
break;
|
|
}
|
|
if (i == max11410_sampling_len[filter]) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ret = regmap_write_bits(st->regmap, MAX11410_REG_FILTER,
|
|
MAX11410_FILTER_RATE_MASK, i);
|
|
|
|
out:
|
|
mutex_unlock(&st->lock);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int max11410_read_avail(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
const int **vals, int *type, int *length,
|
|
long info)
|
|
{
|
|
struct max11410_state *st = iio_priv(indio_dev);
|
|
struct max11410_channel_config cfg;
|
|
int ret, reg_val, filter;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = regmap_read(st->regmap, MAX11410_REG_FILTER, ®_val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
filter = FIELD_GET(MAX11410_FILTER_LINEF_MASK, reg_val);
|
|
|
|
*vals = (const int *)max11410_sampling_rates[filter];
|
|
*length = max11410_sampling_len[filter] * 2;
|
|
*type = IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
return IIO_AVAIL_LIST;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
cfg = st->channels[chan->address];
|
|
|
|
if (!cfg.scale_avail)
|
|
return -EINVAL;
|
|
|
|
*vals = cfg.scale_avail;
|
|
*length = MAX11410_SCALE_AVAIL_SIZE * 2;
|
|
*type = IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
return IIO_AVAIL_LIST;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info max11410_info = {
|
|
.read_raw = max11410_read_raw,
|
|
.write_raw = max11410_write_raw,
|
|
.read_avail = max11410_read_avail,
|
|
.attrs = &max11410_attribute_group,
|
|
};
|
|
|
|
static irqreturn_t max11410_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct max11410_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = max11410_read_reg(st, MAX11410_REG_DATA0, &st->scan.data);
|
|
if (ret) {
|
|
dev_err(&indio_dev->dev, "cannot read data\n");
|
|
goto out;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &st->scan,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
out:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int max11410_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct max11410_state *st = iio_priv(indio_dev);
|
|
int scan_ch, ret;
|
|
|
|
scan_ch = ffs(*indio_dev->active_scan_mask) - 1;
|
|
|
|
ret = max11410_configure_channel(st, &indio_dev->channels[scan_ch]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Start continuous conversion. */
|
|
return max11410_write_reg(st, MAX11410_REG_CONV_START,
|
|
MAX11410_CONV_TYPE_CONTINUOUS);
|
|
}
|
|
|
|
static int max11410_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct max11410_state *st = iio_priv(indio_dev);
|
|
|
|
/* Stop continuous conversion. */
|
|
return max11410_write_reg(st, MAX11410_REG_CONV_START,
|
|
MAX11410_CONV_TYPE_SINGLE);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops max11410_buffer_ops = {
|
|
.postenable = &max11410_buffer_postenable,
|
|
.predisable = &max11410_buffer_predisable,
|
|
.validate_scan_mask = &iio_validate_scan_mask_onehot,
|
|
};
|
|
|
|
static const struct iio_trigger_ops max11410_trigger_ops = {
|
|
.validate_device = iio_trigger_validate_own_device,
|
|
};
|
|
|
|
static irqreturn_t max11410_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct iio_dev *indio_dev = dev_id;
|
|
struct max11410_state *st = iio_priv(indio_dev);
|
|
|
|
if (iio_buffer_enabled(indio_dev))
|
|
iio_trigger_poll_nested(st->trig);
|
|
else
|
|
complete(&st->completion);
|
|
|
|
return IRQ_HANDLED;
|
|
};
|
|
|
|
static int max11410_parse_channels(struct max11410_state *st,
|
|
struct iio_dev *indio_dev)
|
|
{
|
|
struct iio_chan_spec chanspec = chanspec_template;
|
|
struct device *dev = &st->spi_dev->dev;
|
|
struct max11410_channel_config *cfg;
|
|
struct iio_chan_spec *channels;
|
|
struct fwnode_handle *child;
|
|
u32 reference, sig_path;
|
|
const char *node_name;
|
|
u32 inputs[2], scale;
|
|
unsigned int num_ch;
|
|
int chan_idx = 0;
|
|
int ret, i;
|
|
|
|
num_ch = device_get_child_node_count(dev);
|
|
if (num_ch == 0)
|
|
return dev_err_probe(&indio_dev->dev, -ENODEV,
|
|
"FW has no channels defined\n");
|
|
|
|
/* Reserve space for soft timestamp channel */
|
|
num_ch++;
|
|
channels = devm_kcalloc(dev, num_ch, sizeof(*channels), GFP_KERNEL);
|
|
if (!channels)
|
|
return -ENOMEM;
|
|
|
|
st->channels = devm_kcalloc(dev, num_ch, sizeof(*st->channels),
|
|
GFP_KERNEL);
|
|
if (!st->channels)
|
|
return -ENOMEM;
|
|
|
|
device_for_each_child_node(dev, child) {
|
|
node_name = fwnode_get_name(child);
|
|
if (fwnode_property_present(child, "diff-channels")) {
|
|
ret = fwnode_property_read_u32_array(child,
|
|
"diff-channels",
|
|
inputs,
|
|
ARRAY_SIZE(inputs));
|
|
|
|
chanspec.differential = 1;
|
|
} else {
|
|
ret = fwnode_property_read_u32(child, "reg", &inputs[0]);
|
|
|
|
inputs[1] = 0;
|
|
chanspec.differential = 0;
|
|
}
|
|
if (ret) {
|
|
fwnode_handle_put(child);
|
|
return ret;
|
|
}
|
|
|
|
if (inputs[0] > MAX11410_CHANNEL_INDEX_MAX ||
|
|
inputs[1] > MAX11410_CHANNEL_INDEX_MAX) {
|
|
fwnode_handle_put(child);
|
|
return dev_err_probe(&indio_dev->dev, -EINVAL,
|
|
"Invalid channel index for %s, should be less than %d\n",
|
|
node_name,
|
|
MAX11410_CHANNEL_INDEX_MAX + 1);
|
|
}
|
|
|
|
cfg = &st->channels[chan_idx];
|
|
|
|
reference = MAX11410_REFSEL_AVDD_AGND;
|
|
fwnode_property_read_u32(child, "adi,reference", &reference);
|
|
if (reference > MAX11410_REFSEL_MAX) {
|
|
fwnode_handle_put(child);
|
|
return dev_err_probe(&indio_dev->dev, -EINVAL,
|
|
"Invalid adi,reference value for %s, should be less than %d.\n",
|
|
node_name, MAX11410_REFSEL_MAX + 1);
|
|
}
|
|
|
|
if (!max11410_get_vrefp(st, reference) ||
|
|
(!max11410_get_vrefn(st, reference) && reference <= 2)) {
|
|
fwnode_handle_put(child);
|
|
return dev_err_probe(&indio_dev->dev, -EINVAL,
|
|
"Invalid VREF configuration for %s, either specify corresponding VREF regulators or change adi,reference property.\n",
|
|
node_name);
|
|
}
|
|
|
|
sig_path = MAX11410_PGA_SIG_PATH_BUFFERED;
|
|
fwnode_property_read_u32(child, "adi,input-mode", &sig_path);
|
|
if (sig_path > MAX11410_SIG_PATH_MAX) {
|
|
fwnode_handle_put(child);
|
|
return dev_err_probe(&indio_dev->dev, -EINVAL,
|
|
"Invalid adi,input-mode value for %s, should be less than %d.\n",
|
|
node_name, MAX11410_SIG_PATH_MAX + 1);
|
|
}
|
|
|
|
fwnode_property_read_u32(child, "settling-time-us",
|
|
&cfg->settling_time_us);
|
|
cfg->bipolar = fwnode_property_read_bool(child, "bipolar");
|
|
cfg->buffered_vrefp = fwnode_property_read_bool(child, "adi,buffered-vrefp");
|
|
cfg->buffered_vrefn = fwnode_property_read_bool(child, "adi,buffered-vrefn");
|
|
cfg->refsel = reference;
|
|
cfg->sig_path = sig_path;
|
|
cfg->gain = 0;
|
|
|
|
/* Enable scale_available property if input mode is PGA */
|
|
if (sig_path == MAX11410_PGA_SIG_PATH_PGA) {
|
|
__set_bit(IIO_CHAN_INFO_SCALE,
|
|
&chanspec.info_mask_separate_available);
|
|
cfg->scale_avail = devm_kcalloc(dev, MAX11410_SCALE_AVAIL_SIZE * 2,
|
|
sizeof(*cfg->scale_avail),
|
|
GFP_KERNEL);
|
|
if (!cfg->scale_avail) {
|
|
fwnode_handle_put(child);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
scale = max11410_get_scale(st, *cfg);
|
|
for (i = 0; i < MAX11410_SCALE_AVAIL_SIZE; i++) {
|
|
cfg->scale_avail[2 * i] = scale >> i;
|
|
cfg->scale_avail[2 * i + 1] = chanspec.scan_type.realbits;
|
|
}
|
|
} else {
|
|
__clear_bit(IIO_CHAN_INFO_SCALE,
|
|
&chanspec.info_mask_separate_available);
|
|
}
|
|
|
|
chanspec.address = chan_idx;
|
|
chanspec.scan_index = chan_idx;
|
|
chanspec.channel = inputs[0];
|
|
chanspec.channel2 = inputs[1];
|
|
|
|
channels[chan_idx] = chanspec;
|
|
chan_idx++;
|
|
}
|
|
|
|
channels[chan_idx] = (struct iio_chan_spec)IIO_CHAN_SOFT_TIMESTAMP(chan_idx);
|
|
|
|
indio_dev->num_channels = chan_idx + 1;
|
|
indio_dev->channels = channels;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void max11410_disable_reg(void *reg)
|
|
{
|
|
regulator_disable(reg);
|
|
}
|
|
|
|
static int max11410_init_vref(struct device *dev,
|
|
struct regulator **vref,
|
|
const char *id)
|
|
{
|
|
struct regulator *reg;
|
|
int ret;
|
|
|
|
reg = devm_regulator_get_optional(dev, id);
|
|
if (PTR_ERR(reg) == -ENODEV) {
|
|
*vref = NULL;
|
|
return 0;
|
|
} else if (IS_ERR(reg)) {
|
|
return PTR_ERR(reg);
|
|
}
|
|
ret = regulator_enable(reg);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret,
|
|
"Failed to enable regulator %s\n", id);
|
|
|
|
*vref = reg;
|
|
return devm_add_action_or_reset(dev, max11410_disable_reg, reg);
|
|
}
|
|
|
|
static int max11410_calibrate(struct max11410_state *st, u32 cal_type)
|
|
{
|
|
int ret, ret2, val;
|
|
|
|
ret = max11410_write_reg(st, MAX11410_REG_CAL_START, cal_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Wait for status register Calibration Ready flag */
|
|
ret = read_poll_timeout(max11410_read_reg, ret2,
|
|
ret2 || (val & MAX11410_STATUS_CAL_READY_BIT),
|
|
50000, MAX11410_CALIB_TIMEOUT_MS * 1000, true,
|
|
st, MAX11410_REG_STATUS, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ret2;
|
|
}
|
|
|
|
static int max11410_self_calibrate(struct max11410_state *st)
|
|
{
|
|
int ret, i;
|
|
|
|
ret = regmap_write_bits(st->regmap, MAX11410_REG_FILTER,
|
|
MAX11410_FILTER_RATE_MASK,
|
|
FIELD_PREP(MAX11410_FILTER_RATE_MASK,
|
|
MAX11410_FILTER_RATE_MAX));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max11410_calibrate(st, MAX11410_CAL_START_SELF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write_bits(st->regmap, MAX11410_REG_PGA,
|
|
MAX11410_PGA_SIG_PATH_MASK,
|
|
FIELD_PREP(MAX11410_PGA_SIG_PATH_MASK,
|
|
MAX11410_PGA_SIG_PATH_PGA));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* PGA calibrations */
|
|
for (i = 1; i < 8; ++i) {
|
|
ret = regmap_write_bits(st->regmap, MAX11410_REG_PGA,
|
|
MAX11410_PGA_GAIN_MASK, i);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max11410_calibrate(st, MAX11410_CAL_START_PGA);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Cleanup */
|
|
ret = regmap_write_bits(st->regmap, MAX11410_REG_PGA,
|
|
MAX11410_PGA_GAIN_MASK, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write_bits(st->regmap, MAX11410_REG_FILTER,
|
|
MAX11410_FILTER_RATE_MASK, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_write_bits(st->regmap, MAX11410_REG_PGA,
|
|
MAX11410_PGA_SIG_PATH_MASK,
|
|
FIELD_PREP(MAX11410_PGA_SIG_PATH_MASK,
|
|
MAX11410_PGA_SIG_PATH_BUFFERED));
|
|
}
|
|
|
|
static int max11410_probe(struct spi_device *spi)
|
|
{
|
|
const char *vrefp_regs[] = { "vref0p", "vref1p", "vref2p" };
|
|
const char *vrefn_regs[] = { "vref0n", "vref1n", "vref2n" };
|
|
struct device *dev = &spi->dev;
|
|
struct max11410_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int ret, irqs[2];
|
|
int i;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
st->spi_dev = spi;
|
|
init_completion(&st->completion);
|
|
mutex_init(&st->lock);
|
|
|
|
indio_dev->name = "max11410";
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &max11410_info;
|
|
|
|
st->regmap = devm_regmap_init_spi(spi, ®map_config);
|
|
if (IS_ERR(st->regmap))
|
|
return dev_err_probe(dev, PTR_ERR(st->regmap),
|
|
"regmap initialization failed\n");
|
|
|
|
ret = max11410_init_vref(dev, &st->avdd, "avdd");
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vrefp_regs); i++) {
|
|
ret = max11410_init_vref(dev, &st->vrefp[i], vrefp_regs[i]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max11410_init_vref(dev, &st->vrefn[i], vrefn_regs[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Regulators must be configured before parsing channels for
|
|
* validating "adi,reference" property of each channel.
|
|
*/
|
|
ret = max11410_parse_channels(st, indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "gpio0");
|
|
irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "gpio1");
|
|
|
|
if (irqs[0] > 0) {
|
|
st->irq = irqs[0];
|
|
ret = regmap_write(st->regmap, MAX11410_REG_GPIO_CTRL(0),
|
|
MAX11410_GPIO_INTRB);
|
|
} else if (irqs[1] > 0) {
|
|
st->irq = irqs[1];
|
|
ret = regmap_write(st->regmap, MAX11410_REG_GPIO_CTRL(1),
|
|
MAX11410_GPIO_INTRB);
|
|
} else if (spi->irq > 0) {
|
|
return dev_err_probe(dev, -ENODEV,
|
|
"no interrupt name specified");
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_set_bits(st->regmap, MAX11410_REG_CTRL,
|
|
MAX11410_CTRL_FORMAT_BIT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
|
|
&max11410_trigger_handler,
|
|
&max11410_buffer_ops);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (st->irq > 0) {
|
|
st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
|
|
indio_dev->name,
|
|
iio_device_id(indio_dev));
|
|
if (!st->trig)
|
|
return -ENOMEM;
|
|
|
|
st->trig->ops = &max11410_trigger_ops;
|
|
ret = devm_iio_trigger_register(dev, st->trig);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_request_threaded_irq(dev, st->irq, NULL,
|
|
&max11410_interrupt,
|
|
IRQF_ONESHOT, "max11410",
|
|
indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = max11410_self_calibrate(st);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret,
|
|
"cannot perform device self calibration\n");
|
|
|
|
return devm_iio_device_register(dev, indio_dev);
|
|
}
|
|
|
|
static const struct of_device_id max11410_spi_of_id[] = {
|
|
{ .compatible = "adi,max11410" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max11410_spi_of_id);
|
|
|
|
static const struct spi_device_id max11410_id[] = {
|
|
{ "max11410" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, max11410_id);
|
|
|
|
static struct spi_driver max11410_driver = {
|
|
.driver = {
|
|
.name = "max11410",
|
|
.of_match_table = max11410_spi_of_id,
|
|
},
|
|
.probe = max11410_probe,
|
|
.id_table = max11410_id,
|
|
};
|
|
module_spi_driver(max11410_driver);
|
|
|
|
MODULE_AUTHOR("David Jung <David.Jung@analog.com>");
|
|
MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices MAX11410 ADC");
|
|
MODULE_LICENSE("GPL");
|