mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 14:34:28 +08:00
905abf1229
The PHY type defines are no longer used in the PCIe, UFS and USB QMP drivers so drop the corresponding include. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221111094239.11547-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
877 lines
23 KiB
C
877 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2017, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "phy-qcom-qmp.h"
|
|
|
|
/* QPHY_SW_RESET bit */
|
|
#define SW_RESET BIT(0)
|
|
/* QPHY_POWER_DOWN_CONTROL */
|
|
#define SW_PWRDN BIT(0)
|
|
#define REFCLK_DRV_DSBL BIT(1)
|
|
/* QPHY_START_CONTROL bits */
|
|
#define SERDES_START BIT(0)
|
|
#define PCS_START BIT(1)
|
|
#define PLL_READY_GATE_EN BIT(3)
|
|
/* QPHY_PCS_STATUS bit */
|
|
#define PHYSTATUS BIT(6)
|
|
/* QPHY_COM_PCS_READY_STATUS bit */
|
|
#define PCS_READY BIT(0)
|
|
|
|
#define PHY_INIT_COMPLETE_TIMEOUT 10000
|
|
#define POWER_DOWN_DELAY_US_MIN 10
|
|
#define POWER_DOWN_DELAY_US_MAX 20
|
|
|
|
struct qmp_phy_init_tbl {
|
|
unsigned int offset;
|
|
unsigned int val;
|
|
/*
|
|
* mask of lanes for which this register is written
|
|
* for cases when second lane needs different values
|
|
*/
|
|
u8 lane_mask;
|
|
};
|
|
|
|
#define QMP_PHY_INIT_CFG(o, v) \
|
|
{ \
|
|
.offset = o, \
|
|
.val = v, \
|
|
.lane_mask = 0xff, \
|
|
}
|
|
|
|
#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
|
|
{ \
|
|
.offset = o, \
|
|
.val = v, \
|
|
.lane_mask = l, \
|
|
}
|
|
|
|
/* set of registers with offsets different per-PHY */
|
|
enum qphy_reg_layout {
|
|
/* Common block control registers */
|
|
QPHY_COM_SW_RESET,
|
|
QPHY_COM_POWER_DOWN_CONTROL,
|
|
QPHY_COM_START_CONTROL,
|
|
QPHY_COM_PCS_READY_STATUS,
|
|
/* PCS registers */
|
|
QPHY_SW_RESET,
|
|
QPHY_START_CTRL,
|
|
QPHY_PCS_STATUS,
|
|
/* Keep last to ensure regs_layout arrays are properly initialized */
|
|
QPHY_LAYOUT_SIZE
|
|
};
|
|
|
|
static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
|
|
[QPHY_COM_SW_RESET] = 0x400,
|
|
[QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
|
|
[QPHY_COM_START_CONTROL] = 0x408,
|
|
[QPHY_COM_PCS_READY_STATUS] = 0x448,
|
|
[QPHY_SW_RESET] = 0x00,
|
|
[QPHY_START_CTRL] = 0x08,
|
|
[QPHY_PCS_STATUS] = 0x174,
|
|
};
|
|
|
|
static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
|
|
QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
|
|
};
|
|
|
|
static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
|
|
QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
|
|
QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
|
|
};
|
|
|
|
static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
|
|
QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
|
|
};
|
|
|
|
static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_IDLE_DTCT_CNTRL, 0x4c),
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
|
|
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME, 0x05),
|
|
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_ENDPOINT_REFCLK_DRIVE, 0x05),
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_POWER_DOWN_CONTROL, 0x02),
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_POWER_STATE_CONFIG4, 0x00),
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_POWER_STATE_CONFIG1, 0xa3),
|
|
QMP_PHY_INIT_CFG(QPHY_V2_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
|
|
};
|
|
|
|
/* struct qmp_phy_cfg - per-PHY initialization config */
|
|
struct qmp_phy_cfg {
|
|
/* number of PHYs provided by this block */
|
|
int num_phys;
|
|
|
|
/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
|
|
const struct qmp_phy_init_tbl *serdes_tbl;
|
|
int serdes_tbl_num;
|
|
const struct qmp_phy_init_tbl *tx_tbl;
|
|
int tx_tbl_num;
|
|
const struct qmp_phy_init_tbl *rx_tbl;
|
|
int rx_tbl_num;
|
|
const struct qmp_phy_init_tbl *pcs_tbl;
|
|
int pcs_tbl_num;
|
|
|
|
/* clock ids to be requested */
|
|
const char * const *clk_list;
|
|
int num_clks;
|
|
/* resets to be requested */
|
|
const char * const *reset_list;
|
|
int num_resets;
|
|
/* regulators to be requested */
|
|
const char * const *vreg_list;
|
|
int num_vregs;
|
|
|
|
/* array of registers with different offsets */
|
|
const unsigned int *regs;
|
|
};
|
|
|
|
/**
|
|
* struct qmp_phy - per-lane phy descriptor
|
|
*
|
|
* @phy: generic phy
|
|
* @cfg: phy specific configuration
|
|
* @serdes: iomapped memory space for phy's serdes (i.e. PLL)
|
|
* @tx: iomapped memory space for lane's tx
|
|
* @rx: iomapped memory space for lane's rx
|
|
* @pcs: iomapped memory space for lane's pcs
|
|
* @pipe_clk: pipe clock
|
|
* @index: lane index
|
|
* @qmp: QMP phy to which this lane belongs
|
|
* @lane_rst: lane's reset controller
|
|
*/
|
|
struct qmp_phy {
|
|
struct phy *phy;
|
|
const struct qmp_phy_cfg *cfg;
|
|
void __iomem *serdes;
|
|
void __iomem *tx;
|
|
void __iomem *rx;
|
|
void __iomem *pcs;
|
|
struct clk *pipe_clk;
|
|
unsigned int index;
|
|
struct qcom_qmp *qmp;
|
|
struct reset_control *lane_rst;
|
|
};
|
|
|
|
/**
|
|
* struct qcom_qmp - structure holding QMP phy block attributes
|
|
*
|
|
* @dev: device
|
|
*
|
|
* @clks: array of clocks required by phy
|
|
* @resets: array of resets required by phy
|
|
* @vregs: regulator supplies bulk data
|
|
*
|
|
* @phys: array of per-lane phy descriptors
|
|
* @phy_mutex: mutex lock for PHY common block initialization
|
|
* @init_count: phy common block initialization count
|
|
*/
|
|
struct qcom_qmp {
|
|
struct device *dev;
|
|
|
|
struct clk_bulk_data *clks;
|
|
struct reset_control_bulk_data *resets;
|
|
struct regulator_bulk_data *vregs;
|
|
|
|
struct qmp_phy **phys;
|
|
|
|
struct mutex phy_mutex;
|
|
int init_count;
|
|
};
|
|
|
|
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(base + offset);
|
|
reg |= val;
|
|
writel(reg, base + offset);
|
|
|
|
/* ensure that above write is through */
|
|
readl(base + offset);
|
|
}
|
|
|
|
static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(base + offset);
|
|
reg &= ~val;
|
|
writel(reg, base + offset);
|
|
|
|
/* ensure that above write is through */
|
|
readl(base + offset);
|
|
}
|
|
|
|
/* list of clocks required by phy */
|
|
static const char * const msm8996_phy_clk_l[] = {
|
|
"aux", "cfg_ahb", "ref",
|
|
};
|
|
|
|
/* list of resets */
|
|
static const char * const msm8996_pciephy_reset_l[] = {
|
|
"phy", "common", "cfg",
|
|
};
|
|
|
|
/* list of regulators */
|
|
static const char * const qmp_phy_vreg_l[] = {
|
|
"vdda-phy", "vdda-pll",
|
|
};
|
|
|
|
static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
|
|
.num_phys = 3,
|
|
|
|
.serdes_tbl = msm8996_pcie_serdes_tbl,
|
|
.serdes_tbl_num = ARRAY_SIZE(msm8996_pcie_serdes_tbl),
|
|
.tx_tbl = msm8996_pcie_tx_tbl,
|
|
.tx_tbl_num = ARRAY_SIZE(msm8996_pcie_tx_tbl),
|
|
.rx_tbl = msm8996_pcie_rx_tbl,
|
|
.rx_tbl_num = ARRAY_SIZE(msm8996_pcie_rx_tbl),
|
|
.pcs_tbl = msm8996_pcie_pcs_tbl,
|
|
.pcs_tbl_num = ARRAY_SIZE(msm8996_pcie_pcs_tbl),
|
|
.clk_list = msm8996_phy_clk_l,
|
|
.num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
|
|
.reset_list = msm8996_pciephy_reset_l,
|
|
.num_resets = ARRAY_SIZE(msm8996_pciephy_reset_l),
|
|
.vreg_list = qmp_phy_vreg_l,
|
|
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
|
|
.regs = pciephy_regs_layout,
|
|
};
|
|
|
|
static void qmp_pcie_msm8996_configure_lane(void __iomem *base,
|
|
const struct qmp_phy_init_tbl tbl[],
|
|
int num,
|
|
u8 lane_mask)
|
|
{
|
|
int i;
|
|
const struct qmp_phy_init_tbl *t = tbl;
|
|
|
|
if (!t)
|
|
return;
|
|
|
|
for (i = 0; i < num; i++, t++) {
|
|
if (!(t->lane_mask & lane_mask))
|
|
continue;
|
|
|
|
writel(t->val, base + t->offset);
|
|
}
|
|
}
|
|
|
|
static void qmp_pcie_msm8996_configure(void __iomem *base,
|
|
const struct qmp_phy_init_tbl tbl[],
|
|
int num)
|
|
{
|
|
qmp_pcie_msm8996_configure_lane(base, tbl, num, 0xff);
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_serdes_init(struct qmp_phy *qphy)
|
|
{
|
|
struct qcom_qmp *qmp = qphy->qmp;
|
|
const struct qmp_phy_cfg *cfg = qphy->cfg;
|
|
void __iomem *serdes = qphy->serdes;
|
|
const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
|
|
int serdes_tbl_num = cfg->serdes_tbl_num;
|
|
void __iomem *status;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
qmp_pcie_msm8996_configure(serdes, serdes_tbl, serdes_tbl_num);
|
|
|
|
qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
|
|
qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
|
|
SERDES_START | PCS_START);
|
|
|
|
status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
|
|
ret = readl_poll_timeout(status, val, (val & PCS_READY), 200,
|
|
PHY_INIT_COMPLETE_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(qmp->dev,
|
|
"phy common block init timed-out\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_com_init(struct qmp_phy *qphy)
|
|
{
|
|
struct qcom_qmp *qmp = qphy->qmp;
|
|
const struct qmp_phy_cfg *cfg = qphy->cfg;
|
|
void __iomem *serdes = qphy->serdes;
|
|
int ret;
|
|
|
|
mutex_lock(&qmp->phy_mutex);
|
|
if (qmp->init_count++) {
|
|
mutex_unlock(&qmp->phy_mutex);
|
|
return 0;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
|
|
if (ret) {
|
|
dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
|
|
goto err_unlock;
|
|
}
|
|
|
|
ret = reset_control_bulk_assert(cfg->num_resets, qmp->resets);
|
|
if (ret) {
|
|
dev_err(qmp->dev, "reset assert failed\n");
|
|
goto err_disable_regulators;
|
|
}
|
|
|
|
ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets);
|
|
if (ret) {
|
|
dev_err(qmp->dev, "reset deassert failed\n");
|
|
goto err_disable_regulators;
|
|
}
|
|
|
|
ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
|
|
if (ret)
|
|
goto err_assert_reset;
|
|
|
|
qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
|
|
SW_PWRDN);
|
|
|
|
mutex_unlock(&qmp->phy_mutex);
|
|
|
|
return 0;
|
|
|
|
err_assert_reset:
|
|
reset_control_bulk_assert(cfg->num_resets, qmp->resets);
|
|
err_disable_regulators:
|
|
regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
|
|
err_unlock:
|
|
mutex_unlock(&qmp->phy_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_com_exit(struct qmp_phy *qphy)
|
|
{
|
|
struct qcom_qmp *qmp = qphy->qmp;
|
|
const struct qmp_phy_cfg *cfg = qphy->cfg;
|
|
void __iomem *serdes = qphy->serdes;
|
|
|
|
mutex_lock(&qmp->phy_mutex);
|
|
if (--qmp->init_count) {
|
|
mutex_unlock(&qmp->phy_mutex);
|
|
return 0;
|
|
}
|
|
|
|
qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
|
|
SERDES_START | PCS_START);
|
|
qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
|
|
SW_RESET);
|
|
qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
|
|
SW_PWRDN);
|
|
|
|
reset_control_bulk_assert(cfg->num_resets, qmp->resets);
|
|
|
|
clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
|
|
|
|
regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
|
|
|
|
mutex_unlock(&qmp->phy_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_init(struct phy *phy)
|
|
{
|
|
struct qmp_phy *qphy = phy_get_drvdata(phy);
|
|
struct qcom_qmp *qmp = qphy->qmp;
|
|
int ret;
|
|
dev_vdbg(qmp->dev, "Initializing QMP phy\n");
|
|
|
|
ret = qmp_pcie_msm8996_com_init(qphy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_power_on(struct phy *phy)
|
|
{
|
|
struct qmp_phy *qphy = phy_get_drvdata(phy);
|
|
struct qcom_qmp *qmp = qphy->qmp;
|
|
const struct qmp_phy_cfg *cfg = qphy->cfg;
|
|
void __iomem *tx = qphy->tx;
|
|
void __iomem *rx = qphy->rx;
|
|
void __iomem *pcs = qphy->pcs;
|
|
void __iomem *status;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
qmp_pcie_msm8996_serdes_init(qphy);
|
|
|
|
ret = reset_control_deassert(qphy->lane_rst);
|
|
if (ret) {
|
|
dev_err(qmp->dev, "lane%d reset deassert failed\n",
|
|
qphy->index);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(qphy->pipe_clk);
|
|
if (ret) {
|
|
dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
|
|
goto err_reset_lane;
|
|
}
|
|
|
|
/* Tx, Rx, and PCS configurations */
|
|
qmp_pcie_msm8996_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
|
|
qmp_pcie_msm8996_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
|
|
qmp_pcie_msm8996_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
|
|
|
|
/*
|
|
* Pull out PHY from POWER DOWN state.
|
|
* This is active low enable signal to power-down PHY.
|
|
*/
|
|
qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
|
|
SW_PWRDN | REFCLK_DRV_DSBL);
|
|
|
|
usleep_range(POWER_DOWN_DELAY_US_MIN, POWER_DOWN_DELAY_US_MAX);
|
|
|
|
/* Pull PHY out of reset state */
|
|
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
|
|
|
|
/* start SerDes and Phy-Coding-Sublayer */
|
|
qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL],
|
|
PCS_START | PLL_READY_GATE_EN);
|
|
|
|
status = pcs + cfg->regs[QPHY_PCS_STATUS];
|
|
ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
|
|
PHY_INIT_COMPLETE_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(qmp->dev, "phy initialization timed-out\n");
|
|
goto err_disable_pipe_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_pipe_clk:
|
|
clk_disable_unprepare(qphy->pipe_clk);
|
|
err_reset_lane:
|
|
reset_control_assert(qphy->lane_rst);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_power_off(struct phy *phy)
|
|
{
|
|
struct qmp_phy *qphy = phy_get_drvdata(phy);
|
|
const struct qmp_phy_cfg *cfg = qphy->cfg;
|
|
|
|
clk_disable_unprepare(qphy->pipe_clk);
|
|
|
|
/* PHY reset */
|
|
qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
|
|
|
|
/* stop SerDes and Phy-Coding-Sublayer */
|
|
qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
|
|
SERDES_START | PCS_START);
|
|
|
|
/* Put PHY into POWER DOWN state: active low */
|
|
qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
|
|
SW_PWRDN | REFCLK_DRV_DSBL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_exit(struct phy *phy)
|
|
{
|
|
struct qmp_phy *qphy = phy_get_drvdata(phy);
|
|
|
|
reset_control_assert(qphy->lane_rst);
|
|
|
|
qmp_pcie_msm8996_com_exit(qphy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_enable(struct phy *phy)
|
|
{
|
|
int ret;
|
|
|
|
ret = qmp_pcie_msm8996_init(phy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qmp_pcie_msm8996_power_on(phy);
|
|
if (ret)
|
|
qmp_pcie_msm8996_exit(phy);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_disable(struct phy *phy)
|
|
{
|
|
int ret;
|
|
|
|
ret = qmp_pcie_msm8996_power_off(phy);
|
|
if (ret)
|
|
return ret;
|
|
return qmp_pcie_msm8996_exit(phy);
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
|
|
{
|
|
struct qcom_qmp *qmp = dev_get_drvdata(dev);
|
|
int num = cfg->num_vregs;
|
|
int i;
|
|
|
|
qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
|
|
if (!qmp->vregs)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num; i++)
|
|
qmp->vregs[i].supply = cfg->vreg_list[i];
|
|
|
|
return devm_regulator_bulk_get(dev, num, qmp->vregs);
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
|
|
{
|
|
struct qcom_qmp *qmp = dev_get_drvdata(dev);
|
|
int i;
|
|
int ret;
|
|
|
|
qmp->resets = devm_kcalloc(dev, cfg->num_resets,
|
|
sizeof(*qmp->resets), GFP_KERNEL);
|
|
if (!qmp->resets)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < cfg->num_resets; i++)
|
|
qmp->resets[i].id = cfg->reset_list[i];
|
|
|
|
ret = devm_reset_control_bulk_get_exclusive(dev, cfg->num_resets, qmp->resets);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to get resets\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
|
|
{
|
|
struct qcom_qmp *qmp = dev_get_drvdata(dev);
|
|
int num = cfg->num_clks;
|
|
int i;
|
|
|
|
qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
|
|
if (!qmp->clks)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num; i++)
|
|
qmp->clks[i].id = cfg->clk_list[i];
|
|
|
|
return devm_clk_bulk_get(dev, num, qmp->clks);
|
|
}
|
|
|
|
static void phy_clk_release_provider(void *res)
|
|
{
|
|
of_clk_del_provider(res);
|
|
}
|
|
|
|
/*
|
|
* Register a fixed rate pipe clock.
|
|
*
|
|
* The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
|
|
* controls it. The <s>_pipe_clk coming out of the GCC is requested
|
|
* by the PHY driver for its operations.
|
|
* We register the <s>_pipe_clksrc here. The gcc driver takes care
|
|
* of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
|
|
* Below picture shows this relationship.
|
|
*
|
|
* +---------------+
|
|
* | PHY block |<<---------------------------------------+
|
|
* | | |
|
|
* | +-------+ | +-----+ |
|
|
* I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
|
|
* clk | +-------+ | +-----+
|
|
* +---------------+
|
|
*/
|
|
static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
|
|
{
|
|
struct clk_fixed_rate *fixed;
|
|
struct clk_init_data init = { };
|
|
int ret;
|
|
|
|
ret = of_property_read_string(np, "clock-output-names", &init.name);
|
|
if (ret) {
|
|
dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
|
|
return ret;
|
|
}
|
|
|
|
fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
|
|
if (!fixed)
|
|
return -ENOMEM;
|
|
|
|
init.ops = &clk_fixed_rate_ops;
|
|
|
|
/* controllers using QMP phys use 125MHz pipe clock interface */
|
|
fixed->fixed_rate = 125000000;
|
|
fixed->hw.init = &init;
|
|
|
|
ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Roll a devm action because the clock provider is the child node, but
|
|
* the child node is not actually a device.
|
|
*/
|
|
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
|
|
}
|
|
|
|
static const struct phy_ops qmp_pcie_msm8996_ops = {
|
|
.power_on = qmp_pcie_msm8996_enable,
|
|
.power_off = qmp_pcie_msm8996_disable,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static void qcom_qmp_reset_control_put(void *data)
|
|
{
|
|
reset_control_put(data);
|
|
}
|
|
|
|
static int qmp_pcie_msm8996_create(struct device *dev, struct device_node *np, int id,
|
|
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
|
|
{
|
|
struct qcom_qmp *qmp = dev_get_drvdata(dev);
|
|
struct phy *generic_phy;
|
|
struct qmp_phy *qphy;
|
|
int ret;
|
|
|
|
qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
|
|
if (!qphy)
|
|
return -ENOMEM;
|
|
|
|
qphy->cfg = cfg;
|
|
qphy->serdes = serdes;
|
|
/*
|
|
* Get memory resources for each PHY:
|
|
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
|
|
*/
|
|
qphy->tx = devm_of_iomap(dev, np, 0, NULL);
|
|
if (IS_ERR(qphy->tx))
|
|
return PTR_ERR(qphy->tx);
|
|
|
|
qphy->rx = devm_of_iomap(dev, np, 1, NULL);
|
|
if (IS_ERR(qphy->rx))
|
|
return PTR_ERR(qphy->rx);
|
|
|
|
qphy->pcs = devm_of_iomap(dev, np, 2, NULL);
|
|
if (IS_ERR(qphy->pcs))
|
|
return PTR_ERR(qphy->pcs);
|
|
|
|
qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
|
|
if (IS_ERR(qphy->pipe_clk)) {
|
|
return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
|
|
"failed to get lane%d pipe clock\n", id);
|
|
}
|
|
|
|
qphy->lane_rst = of_reset_control_get_exclusive_by_index(np, 0);
|
|
if (IS_ERR(qphy->lane_rst)) {
|
|
dev_err(dev, "failed to get lane%d reset\n", id);
|
|
return PTR_ERR(qphy->lane_rst);
|
|
}
|
|
ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put,
|
|
qphy->lane_rst);
|
|
if (ret)
|
|
return ret;
|
|
|
|
generic_phy = devm_phy_create(dev, np, &qmp_pcie_msm8996_ops);
|
|
if (IS_ERR(generic_phy)) {
|
|
ret = PTR_ERR(generic_phy);
|
|
dev_err(dev, "failed to create qphy %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
qphy->phy = generic_phy;
|
|
qphy->index = id;
|
|
qphy->qmp = qmp;
|
|
qmp->phys[id] = qphy;
|
|
phy_set_drvdata(generic_phy, qphy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id qmp_pcie_msm8996_of_match_table[] = {
|
|
{
|
|
.compatible = "qcom,msm8996-qmp-pcie-phy",
|
|
.data = &msm8996_pciephy_cfg,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qmp_pcie_msm8996_of_match_table);
|
|
|
|
static int qmp_pcie_msm8996_probe(struct platform_device *pdev)
|
|
{
|
|
struct qcom_qmp *qmp;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *child;
|
|
struct phy_provider *phy_provider;
|
|
void __iomem *serdes;
|
|
const struct qmp_phy_cfg *cfg = NULL;
|
|
int num, id, expected_phys;
|
|
int ret;
|
|
|
|
qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
|
|
if (!qmp)
|
|
return -ENOMEM;
|
|
|
|
qmp->dev = dev;
|
|
dev_set_drvdata(dev, qmp);
|
|
|
|
cfg = of_device_get_match_data(dev);
|
|
if (!cfg)
|
|
return -EINVAL;
|
|
|
|
serdes = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(serdes))
|
|
return PTR_ERR(serdes);
|
|
|
|
expected_phys = cfg->num_phys;
|
|
|
|
mutex_init(&qmp->phy_mutex);
|
|
|
|
ret = qmp_pcie_msm8996_clk_init(dev, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qmp_pcie_msm8996_reset_init(dev, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qmp_pcie_msm8996_vreg_init(dev, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
num = of_get_available_child_count(dev->of_node);
|
|
/* do we have a rogue child node ? */
|
|
if (num > expected_phys)
|
|
return -EINVAL;
|
|
|
|
qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
|
|
if (!qmp->phys)
|
|
return -ENOMEM;
|
|
|
|
id = 0;
|
|
for_each_available_child_of_node(dev->of_node, child) {
|
|
/* Create per-lane phy */
|
|
ret = qmp_pcie_msm8996_create(dev, child, id, serdes, cfg);
|
|
if (ret) {
|
|
dev_err(dev, "failed to create lane%d phy, %d\n",
|
|
id, ret);
|
|
goto err_node_put;
|
|
}
|
|
|
|
/*
|
|
* Register the pipe clock provided by phy.
|
|
* See function description to see details of this pipe clock.
|
|
*/
|
|
ret = phy_pipe_clk_register(qmp, child);
|
|
if (ret) {
|
|
dev_err(qmp->dev,
|
|
"failed to register pipe clock source\n");
|
|
goto err_node_put;
|
|
}
|
|
|
|
id++;
|
|
}
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
|
|
err_node_put:
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver qmp_pcie_msm8996_driver = {
|
|
.probe = qmp_pcie_msm8996_probe,
|
|
.driver = {
|
|
.name = "qcom-qmp-msm8996-pcie-phy",
|
|
.of_match_table = qmp_pcie_msm8996_of_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(qmp_pcie_msm8996_driver);
|
|
|
|
MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
|
|
MODULE_DESCRIPTION("Qualcomm QMP MSM8996 PCIe PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|