mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 01:54:51 +08:00
ff61bc81b3
No core changes this time. Just new driver code and improvements! New drivers: - New driver for the Broadcom BCM4908 SoC. - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative of the Samsung Exynos pin control driver. - New driver for the Amlogic Meson S4 SoC. - New driver for the Sunplus SP7021 SoC. - New driver for the Microsemi Ocelot family ServalT SoC. - New subdriver for Intel Alder Lake-M SoC. - New subdriver for Intel Ice Lake-N SoC, including PCH support. - New subdriver for Renesas R8A779F0 SoC. - New subdriver for Mediatek MT8186 SoC. - New subdriver for NXP Freescale i.MX93 SoC. - New driver for Nuvoton WPCM450 SoC. - New driver for Qualcomm SC8280XP SoC. Improvements: - Wakeup support on Samsung Exynos850 and ExynosAutov9. - Serious and voluminous maintenance cleanup and refactoring in the Renesas drivers. Mainly sharing similar data between the different SoC subdrivers. - Qualcomm SM8450 EGPIO support. - Drive strength support on the Mediatek MT8195. - Add some missing groups and functions to the Ralink RT2880. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmJBsSwACgkQQRCzN7AZ XXOoVhAAhHW2FSXB8ud1mdyuN3CswMSiWrZqC8nveznHMcddzsDvZsGsAP8x6fKi 1CgTXDQblA/plpxqORvBDA8Ji9+z9NAilIMds1ZcMbPjpY1l63uD5VhWq7tpPN1H ALnJAhc4rl1fkJ01U5sTtHJ8xibjpN690ZCrfzNwdLOQAUvXJ22zuyuIcSBFiSMv ij4E2fejOj0ZN7rzb8xTxcaSWUrj5Kci5Eaq6yi/clKHaOrrV5r/tX9yo7uWF3mi 6UX/1IioougtMF2bhsoodQE5E5XN8Hjm2+VWULxBCsKjI1gKY/NR2GXeaHHJve8B do3Y45cU+zZSWVo4mmlf/Z3+4npIQlMFe8LvDmBvb3ZopcbapuGiOSzYxT6aZA/z WtGDDIaECcNF/dJCHwRugAsG5OhT0AYyNblMxsmW+ARoTocMlYPG8Jq4KEmIoIEz m+UArJEe8asQlk4ebK/e0x2hbywgfN02ILO8OygpXpwsHAyx7pjDk7SABkzrAQLg vTpI1i7q1hsYyeTm9RXJJd2VTe9fpYLTgjTa5bnqBQNcsyEd5o9QtH/IwARS/NP7 nNlZLUIUsOa782O6N4oT5JGb96a3cMxHv+hAIKcwhxK/54IYrGh+/BAORnfoe0Vo h6pwKoUVE+L70t0RfmVqYK0EX6zsWSnb1NNNJFM+uLLpfFnx+1U= =TY4V -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time. Just new driver code and improvements! New drivers: - New driver for the Broadcom BCM4908 SoC. - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative of the Samsung Exynos pin control driver. - New driver for the Amlogic Meson S4 SoC. - New driver for the Sunplus SP7021 SoC. - New driver for the Microsemi Ocelot family ServalT SoC. - New subdriver for Intel Alder Lake-M SoC. - New subdriver for Intel Ice Lake-N SoC, including PCH support. - New subdriver for Renesas R8A779F0 SoC. - New subdriver for Mediatek MT8186 SoC. - New subdriver for NXP Freescale i.MX93 SoC. - New driver for Nuvoton WPCM450 SoC. - New driver for Qualcomm SC8280XP SoC. Improvements: - Wakeup support on Samsung Exynos850 and ExynosAutov9. - Serious and voluminous maintenance cleanup and refactoring in the Renesas drivers. Mainly sharing similar data between the different SoC subdrivers. - Qualcomm SM8450 EGPIO support. - Drive strength support on the Mediatek MT8195. - Add some missing groups and functions to the Ralink RT2880" * tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits) pinctrl: mediatek: common-v1: fix semicolon.cocci warnings pinctrl: nuvoton: wpcm450: Fix build error without OF pinctrl: qcom-pmic-gpio: Add support for pm8450 dt-bindings: pinctrl: aspeed: Update gfx node in example dt-bindings: pinctrl: rt2880: add missing pin groups and functions pinctrl: ingenic: Fix regmap on X series SoCs pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS pinctrl: nuvoton: Fix sparse warning pinctrl: mediatek: mt8186: Account for probe refactoring pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback pinctrl: mediatek: common-v1: Commonize spec_pupd callback pinctrl: mediatek: common-v1: Use common probe function pinctrl: mediatek: common-v1: Add common probe function pinctrl: mediatek: paris: Unify probe function by using OF match data pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe pinctrl: berlin: fix error return code of berlin_pinctrl_build_state() pinctrl: qcom: Introduce sc8280xp TLMM driver ...
1008 lines
25 KiB
C
1008 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Microsemi/Microchip SoCs serial gpio driver
|
|
*
|
|
* Author: Lars Povlsen <lars.povlsen@microchip.com>
|
|
*
|
|
* Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include "core.h"
|
|
#include "pinconf.h"
|
|
|
|
#define SGPIO_BITS_PER_WORD 32
|
|
#define SGPIO_MAX_BITS 4
|
|
#define SGPIO_SRC_BITS 3 /* 3 bit wide field per pin */
|
|
|
|
enum {
|
|
REG_INPUT_DATA,
|
|
REG_PORT_CONFIG,
|
|
REG_PORT_ENABLE,
|
|
REG_SIO_CONFIG,
|
|
REG_SIO_CLOCK,
|
|
REG_INT_POLARITY,
|
|
REG_INT_TRIGGER,
|
|
REG_INT_ACK,
|
|
REG_INT_ENABLE,
|
|
REG_INT_IDENT,
|
|
MAXREG
|
|
};
|
|
|
|
enum {
|
|
SGPIO_ARCH_LUTON,
|
|
SGPIO_ARCH_OCELOT,
|
|
SGPIO_ARCH_SPARX5,
|
|
};
|
|
|
|
enum {
|
|
SGPIO_FLAGS_HAS_IRQ = BIT(0),
|
|
};
|
|
|
|
struct sgpio_properties {
|
|
int arch;
|
|
int flags;
|
|
u8 regoff[MAXREG];
|
|
};
|
|
|
|
#define SGPIO_LUTON_AUTO_REPEAT BIT(5)
|
|
#define SGPIO_LUTON_PORT_WIDTH GENMASK(3, 2)
|
|
#define SGPIO_LUTON_CLK_FREQ GENMASK(11, 0)
|
|
#define SGPIO_LUTON_BIT_SOURCE GENMASK(11, 0)
|
|
|
|
#define SGPIO_OCELOT_AUTO_REPEAT BIT(10)
|
|
#define SGPIO_OCELOT_SINGLE_SHOT BIT(11)
|
|
#define SGPIO_OCELOT_PORT_WIDTH GENMASK(8, 7)
|
|
#define SGPIO_OCELOT_CLK_FREQ GENMASK(19, 8)
|
|
#define SGPIO_OCELOT_BIT_SOURCE GENMASK(23, 12)
|
|
|
|
#define SGPIO_SPARX5_AUTO_REPEAT BIT(6)
|
|
#define SGPIO_SPARX5_SINGLE_SHOT BIT(7)
|
|
#define SGPIO_SPARX5_PORT_WIDTH GENMASK(4, 3)
|
|
#define SGPIO_SPARX5_CLK_FREQ GENMASK(19, 8)
|
|
#define SGPIO_SPARX5_BIT_SOURCE GENMASK(23, 12)
|
|
|
|
#define SGPIO_MASTER_INTR_ENA BIT(0)
|
|
|
|
#define SGPIO_INT_TRG_LEVEL 0
|
|
#define SGPIO_INT_TRG_EDGE 1
|
|
#define SGPIO_INT_TRG_EDGE_FALL 2
|
|
#define SGPIO_INT_TRG_EDGE_RISE 3
|
|
|
|
#define SGPIO_TRG_LEVEL_HIGH 0
|
|
#define SGPIO_TRG_LEVEL_LOW 1
|
|
|
|
static const struct sgpio_properties properties_luton = {
|
|
.arch = SGPIO_ARCH_LUTON,
|
|
.regoff = { 0x00, 0x09, 0x29, 0x2a, 0x2b },
|
|
};
|
|
|
|
static const struct sgpio_properties properties_ocelot = {
|
|
.arch = SGPIO_ARCH_OCELOT,
|
|
.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 },
|
|
};
|
|
|
|
static const struct sgpio_properties properties_sparx5 = {
|
|
.arch = SGPIO_ARCH_SPARX5,
|
|
.flags = SGPIO_FLAGS_HAS_IRQ,
|
|
.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05, 0x2a, 0x32, 0x3a, 0x3e, 0x42 },
|
|
};
|
|
|
|
static const char * const functions[] = { "gpio" };
|
|
|
|
struct sgpio_bank {
|
|
struct sgpio_priv *priv;
|
|
bool is_input;
|
|
struct gpio_chip gpio;
|
|
struct pinctrl_desc pctl_desc;
|
|
};
|
|
|
|
struct sgpio_priv {
|
|
struct device *dev;
|
|
struct sgpio_bank in;
|
|
struct sgpio_bank out;
|
|
u32 bitcount;
|
|
u32 ports;
|
|
u32 clock;
|
|
struct regmap *regs;
|
|
const struct sgpio_properties *properties;
|
|
spinlock_t lock;
|
|
/* protects the config register and single shot mode */
|
|
struct mutex poll_lock;
|
|
};
|
|
|
|
struct sgpio_port_addr {
|
|
u8 port;
|
|
u8 bit;
|
|
};
|
|
|
|
static inline void sgpio_pin_to_addr(struct sgpio_priv *priv, int pin,
|
|
struct sgpio_port_addr *addr)
|
|
{
|
|
addr->port = pin / priv->bitcount;
|
|
addr->bit = pin % priv->bitcount;
|
|
}
|
|
|
|
static inline int sgpio_addr_to_pin(struct sgpio_priv *priv, int port, int bit)
|
|
{
|
|
return bit + port * priv->bitcount;
|
|
}
|
|
|
|
static inline u32 sgpio_get_addr(struct sgpio_priv *priv, u32 rno, u32 off)
|
|
{
|
|
return (priv->properties->regoff[rno] + off) *
|
|
regmap_get_reg_stride(priv->regs);
|
|
}
|
|
|
|
static u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
|
|
{
|
|
u32 addr = sgpio_get_addr(priv, rno, off);
|
|
u32 val = 0;
|
|
int ret;
|
|
|
|
ret = regmap_read(priv->regs, addr, &val);
|
|
WARN_ONCE(ret, "error reading sgpio reg %d\n", ret);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void sgpio_writel(struct sgpio_priv *priv,
|
|
u32 val, u32 rno, u32 off)
|
|
{
|
|
u32 addr = sgpio_get_addr(priv, rno, off);
|
|
int ret;
|
|
|
|
ret = regmap_write(priv->regs, addr, val);
|
|
WARN_ONCE(ret, "error writing sgpio reg %d\n", ret);
|
|
}
|
|
|
|
static inline void sgpio_clrsetbits(struct sgpio_priv *priv,
|
|
u32 rno, u32 off, u32 clear, u32 set)
|
|
{
|
|
u32 addr = sgpio_get_addr(priv, rno, off);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(priv->regs, addr, clear | set, set);
|
|
WARN_ONCE(ret, "error updating sgpio reg %d\n", ret);
|
|
}
|
|
|
|
static inline void sgpio_configure_bitstream(struct sgpio_priv *priv)
|
|
{
|
|
int width = priv->bitcount - 1;
|
|
u32 clr, set;
|
|
|
|
switch (priv->properties->arch) {
|
|
case SGPIO_ARCH_LUTON:
|
|
clr = SGPIO_LUTON_PORT_WIDTH;
|
|
set = SGPIO_LUTON_AUTO_REPEAT |
|
|
FIELD_PREP(SGPIO_LUTON_PORT_WIDTH, width);
|
|
break;
|
|
case SGPIO_ARCH_OCELOT:
|
|
clr = SGPIO_OCELOT_PORT_WIDTH;
|
|
set = SGPIO_OCELOT_AUTO_REPEAT |
|
|
FIELD_PREP(SGPIO_OCELOT_PORT_WIDTH, width);
|
|
break;
|
|
case SGPIO_ARCH_SPARX5:
|
|
clr = SGPIO_SPARX5_PORT_WIDTH;
|
|
set = SGPIO_SPARX5_AUTO_REPEAT |
|
|
FIELD_PREP(SGPIO_SPARX5_PORT_WIDTH, width);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, clr, set);
|
|
}
|
|
|
|
static inline void sgpio_configure_clock(struct sgpio_priv *priv, u32 clkfrq)
|
|
{
|
|
u32 clr, set;
|
|
|
|
switch (priv->properties->arch) {
|
|
case SGPIO_ARCH_LUTON:
|
|
clr = SGPIO_LUTON_CLK_FREQ;
|
|
set = FIELD_PREP(SGPIO_LUTON_CLK_FREQ, clkfrq);
|
|
break;
|
|
case SGPIO_ARCH_OCELOT:
|
|
clr = SGPIO_OCELOT_CLK_FREQ;
|
|
set = FIELD_PREP(SGPIO_OCELOT_CLK_FREQ, clkfrq);
|
|
break;
|
|
case SGPIO_ARCH_SPARX5:
|
|
clr = SGPIO_SPARX5_CLK_FREQ;
|
|
set = FIELD_PREP(SGPIO_SPARX5_CLK_FREQ, clkfrq);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, clr, set);
|
|
}
|
|
|
|
static int sgpio_single_shot(struct sgpio_priv *priv)
|
|
{
|
|
u32 addr = sgpio_get_addr(priv, REG_SIO_CONFIG, 0);
|
|
int ret, ret2;
|
|
u32 ctrl;
|
|
unsigned int single_shot;
|
|
unsigned int auto_repeat;
|
|
|
|
switch (priv->properties->arch) {
|
|
case SGPIO_ARCH_LUTON:
|
|
/* not supported for now */
|
|
return 0;
|
|
case SGPIO_ARCH_OCELOT:
|
|
single_shot = SGPIO_OCELOT_SINGLE_SHOT;
|
|
auto_repeat = SGPIO_OCELOT_AUTO_REPEAT;
|
|
break;
|
|
case SGPIO_ARCH_SPARX5:
|
|
single_shot = SGPIO_SPARX5_SINGLE_SHOT;
|
|
auto_repeat = SGPIO_SPARX5_AUTO_REPEAT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Trigger immediate burst. This only works when auto repeat is turned
|
|
* off. Otherwise, the single shot bit will never be cleared by the
|
|
* hardware. Measurements showed that an update might take as long as
|
|
* the burst gap. On a LAN9668 this is about 50ms for the largest
|
|
* setting.
|
|
* After the manual burst, reenable the auto repeat mode again.
|
|
*/
|
|
mutex_lock(&priv->poll_lock);
|
|
ret = regmap_update_bits(priv->regs, addr, single_shot | auto_repeat,
|
|
single_shot);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_read_poll_timeout(priv->regs, addr, ctrl,
|
|
!(ctrl & single_shot), 100, 60000);
|
|
|
|
/* reenable auto repeat mode even if there was an error */
|
|
ret2 = regmap_update_bits(priv->regs, addr, auto_repeat, auto_repeat);
|
|
out:
|
|
mutex_unlock(&priv->poll_lock);
|
|
|
|
return ret ?: ret2;
|
|
}
|
|
|
|
static int sgpio_output_set(struct sgpio_priv *priv,
|
|
struct sgpio_port_addr *addr,
|
|
int value)
|
|
{
|
|
unsigned int bit = SGPIO_SRC_BITS * addr->bit;
|
|
u32 reg = sgpio_get_addr(priv, REG_PORT_CONFIG, addr->port);
|
|
bool changed;
|
|
u32 clr, set;
|
|
int ret;
|
|
|
|
switch (priv->properties->arch) {
|
|
case SGPIO_ARCH_LUTON:
|
|
clr = FIELD_PREP(SGPIO_LUTON_BIT_SOURCE, BIT(bit));
|
|
set = FIELD_PREP(SGPIO_LUTON_BIT_SOURCE, value << bit);
|
|
break;
|
|
case SGPIO_ARCH_OCELOT:
|
|
clr = FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE, BIT(bit));
|
|
set = FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE, value << bit);
|
|
break;
|
|
case SGPIO_ARCH_SPARX5:
|
|
clr = FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE, BIT(bit));
|
|
set = FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE, value << bit);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits_check(priv->regs, reg, clr | set, set,
|
|
&changed);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (changed) {
|
|
ret = sgpio_single_shot(priv);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sgpio_output_get(struct sgpio_priv *priv,
|
|
struct sgpio_port_addr *addr)
|
|
{
|
|
u32 val, portval = sgpio_readl(priv, REG_PORT_CONFIG, addr->port);
|
|
unsigned int bit = SGPIO_SRC_BITS * addr->bit;
|
|
|
|
switch (priv->properties->arch) {
|
|
case SGPIO_ARCH_LUTON:
|
|
val = FIELD_GET(SGPIO_LUTON_BIT_SOURCE, portval);
|
|
break;
|
|
case SGPIO_ARCH_OCELOT:
|
|
val = FIELD_GET(SGPIO_OCELOT_BIT_SOURCE, portval);
|
|
break;
|
|
case SGPIO_ARCH_SPARX5:
|
|
val = FIELD_GET(SGPIO_SPARX5_BIT_SOURCE, portval);
|
|
break;
|
|
default:
|
|
val = 0;
|
|
break;
|
|
}
|
|
return !!(val & BIT(bit));
|
|
}
|
|
|
|
static int sgpio_input_get(struct sgpio_priv *priv,
|
|
struct sgpio_port_addr *addr)
|
|
{
|
|
return !!(sgpio_readl(priv, REG_INPUT_DATA, addr->bit) & BIT(addr->port));
|
|
}
|
|
|
|
static int sgpio_pinconf_get(struct pinctrl_dev *pctldev,
|
|
unsigned int pin, unsigned long *config)
|
|
{
|
|
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
|
|
u32 param = pinconf_to_config_param(*config);
|
|
struct sgpio_priv *priv = bank->priv;
|
|
struct sgpio_port_addr addr;
|
|
int val;
|
|
|
|
sgpio_pin_to_addr(priv, pin, &addr);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
val = bank->is_input;
|
|
break;
|
|
|
|
case PIN_CONFIG_OUTPUT_ENABLE:
|
|
val = !bank->is_input;
|
|
break;
|
|
|
|
case PIN_CONFIG_OUTPUT:
|
|
if (bank->is_input)
|
|
return -EINVAL;
|
|
val = sgpio_output_get(priv, &addr);
|
|
break;
|
|
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sgpio_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *configs, unsigned int num_configs)
|
|
{
|
|
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
|
|
struct sgpio_priv *priv = bank->priv;
|
|
struct sgpio_port_addr addr;
|
|
int cfg, err = 0;
|
|
u32 param, arg;
|
|
|
|
sgpio_pin_to_addr(priv, pin, &addr);
|
|
|
|
for (cfg = 0; cfg < num_configs; cfg++) {
|
|
param = pinconf_to_config_param(configs[cfg]);
|
|
arg = pinconf_to_config_argument(configs[cfg]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_OUTPUT:
|
|
if (bank->is_input)
|
|
return -EINVAL;
|
|
err = sgpio_output_set(priv, &addr, arg);
|
|
break;
|
|
|
|
default:
|
|
err = -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct pinconf_ops sgpio_confops = {
|
|
.is_generic = true,
|
|
.pin_config_get = sgpio_pinconf_get,
|
|
.pin_config_set = sgpio_pinconf_set,
|
|
.pin_config_config_dbg_show = pinconf_generic_dump_config,
|
|
};
|
|
|
|
static int sgpio_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static const char *sgpio_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned int function)
|
|
{
|
|
return functions[0];
|
|
}
|
|
|
|
static int sgpio_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned int function,
|
|
const char *const **groups,
|
|
unsigned *const num_groups)
|
|
{
|
|
*groups = functions;
|
|
*num_groups = ARRAY_SIZE(functions);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sgpio_pinmux_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned int selector, unsigned int group)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int sgpio_gpio_set_direction(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned int pin, bool input)
|
|
{
|
|
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return (input == bank->is_input) ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int sgpio_gpio_request_enable(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned int offset)
|
|
{
|
|
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
|
|
struct sgpio_priv *priv = bank->priv;
|
|
struct sgpio_port_addr addr;
|
|
|
|
sgpio_pin_to_addr(priv, offset, &addr);
|
|
|
|
if ((priv->ports & BIT(addr.port)) == 0) {
|
|
dev_warn(priv->dev, "Request port %d.%d: Port is not enabled\n",
|
|
addr.port, addr.bit);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops sgpio_pmx_ops = {
|
|
.get_functions_count = sgpio_get_functions_count,
|
|
.get_function_name = sgpio_get_function_name,
|
|
.get_function_groups = sgpio_get_function_groups,
|
|
.set_mux = sgpio_pinmux_set_mux,
|
|
.gpio_set_direction = sgpio_gpio_set_direction,
|
|
.gpio_request_enable = sgpio_gpio_request_enable,
|
|
};
|
|
|
|
static int sgpio_pctl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return bank->pctl_desc.npins;
|
|
}
|
|
|
|
static const char *sgpio_pctl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned int group)
|
|
{
|
|
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return bank->pctl_desc.pins[group].name;
|
|
}
|
|
|
|
static int sgpio_pctl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
const unsigned int **pins,
|
|
unsigned int *num_pins)
|
|
{
|
|
struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = &bank->pctl_desc.pins[group].number;
|
|
*num_pins = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops sgpio_pctl_ops = {
|
|
.get_groups_count = sgpio_pctl_get_groups_count,
|
|
.get_group_name = sgpio_pctl_get_group_name,
|
|
.get_group_pins = sgpio_pctl_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
|
.dt_free_map = pinconf_generic_dt_free_map,
|
|
};
|
|
|
|
static int microchip_sgpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
|
|
{
|
|
struct sgpio_bank *bank = gpiochip_get_data(gc);
|
|
|
|
/* Fixed-position function */
|
|
return bank->is_input ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int microchip_sgpio_direction_output(struct gpio_chip *gc,
|
|
unsigned int gpio, int value)
|
|
{
|
|
struct sgpio_bank *bank = gpiochip_get_data(gc);
|
|
struct sgpio_priv *priv = bank->priv;
|
|
struct sgpio_port_addr addr;
|
|
|
|
/* Fixed-position function */
|
|
if (bank->is_input)
|
|
return -EINVAL;
|
|
|
|
sgpio_pin_to_addr(priv, gpio, &addr);
|
|
|
|
return sgpio_output_set(priv, &addr, value);
|
|
}
|
|
|
|
static int microchip_sgpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
|
|
{
|
|
struct sgpio_bank *bank = gpiochip_get_data(gc);
|
|
|
|
return bank->is_input ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
|
|
}
|
|
|
|
static void microchip_sgpio_set_value(struct gpio_chip *gc,
|
|
unsigned int gpio, int value)
|
|
{
|
|
microchip_sgpio_direction_output(gc, gpio, value);
|
|
}
|
|
|
|
static int microchip_sgpio_get_value(struct gpio_chip *gc, unsigned int gpio)
|
|
{
|
|
struct sgpio_bank *bank = gpiochip_get_data(gc);
|
|
struct sgpio_priv *priv = bank->priv;
|
|
struct sgpio_port_addr addr;
|
|
|
|
sgpio_pin_to_addr(priv, gpio, &addr);
|
|
|
|
return bank->is_input ? sgpio_input_get(priv, &addr) : sgpio_output_get(priv, &addr);
|
|
}
|
|
|
|
static int microchip_sgpio_of_xlate(struct gpio_chip *gc,
|
|
const struct of_phandle_args *gpiospec,
|
|
u32 *flags)
|
|
{
|
|
struct sgpio_bank *bank = gpiochip_get_data(gc);
|
|
struct sgpio_priv *priv = bank->priv;
|
|
int pin;
|
|
|
|
/*
|
|
* Note that the SGIO pin is defined by *2* numbers, a port
|
|
* number between 0 and 31, and a bit index, 0 to 3.
|
|
*/
|
|
if (gpiospec->args[0] > SGPIO_BITS_PER_WORD ||
|
|
gpiospec->args[1] > priv->bitcount)
|
|
return -EINVAL;
|
|
|
|
pin = sgpio_addr_to_pin(priv, gpiospec->args[0], gpiospec->args[1]);
|
|
|
|
if (pin > gc->ngpio)
|
|
return -EINVAL;
|
|
|
|
if (flags)
|
|
*flags = gpiospec->args[2];
|
|
|
|
return pin;
|
|
}
|
|
|
|
static int microchip_sgpio_get_ports(struct sgpio_priv *priv)
|
|
{
|
|
const char *range_property_name = "microchip,sgpio-port-ranges";
|
|
struct device *dev = priv->dev;
|
|
u32 range_params[64];
|
|
int i, nranges, ret;
|
|
|
|
/* Calculate port mask */
|
|
nranges = device_property_count_u32(dev, range_property_name);
|
|
if (nranges < 2 || nranges % 2 || nranges > ARRAY_SIZE(range_params)) {
|
|
dev_err(dev, "%s port range: '%s' property\n",
|
|
nranges == -EINVAL ? "Missing" : "Invalid",
|
|
range_property_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = device_property_read_u32_array(dev, range_property_name,
|
|
range_params, nranges);
|
|
if (ret) {
|
|
dev_err(dev, "failed to parse '%s' property: %d\n",
|
|
range_property_name, ret);
|
|
return ret;
|
|
}
|
|
for (i = 0; i < nranges; i += 2) {
|
|
int start, end;
|
|
|
|
start = range_params[i];
|
|
end = range_params[i + 1];
|
|
if (start > end || end >= SGPIO_BITS_PER_WORD) {
|
|
dev_err(dev, "Ill-formed port-range [%d:%d]\n",
|
|
start, end);
|
|
}
|
|
priv->ports |= GENMASK(end, start);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void microchip_sgpio_irq_settype(struct irq_data *data,
|
|
int type,
|
|
int polarity)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sgpio_bank *bank = gpiochip_get_data(chip);
|
|
unsigned int gpio = irqd_to_hwirq(data);
|
|
struct sgpio_port_addr addr;
|
|
unsigned long flags;
|
|
u32 ena;
|
|
|
|
sgpio_pin_to_addr(bank->priv, gpio, &addr);
|
|
|
|
spin_lock_irqsave(&bank->priv->lock, flags);
|
|
|
|
/* Disable interrupt while changing type */
|
|
ena = sgpio_readl(bank->priv, REG_INT_ENABLE, addr.bit);
|
|
sgpio_writel(bank->priv, ena & ~BIT(addr.port), REG_INT_ENABLE, addr.bit);
|
|
|
|
/* Type value spread over 2 registers sets: low, high bit */
|
|
sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER, addr.bit,
|
|
BIT(addr.port), (!!(type & 0x1)) << addr.port);
|
|
sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER, SGPIO_MAX_BITS + addr.bit,
|
|
BIT(addr.port), (!!(type & 0x2)) << addr.port);
|
|
|
|
if (type == SGPIO_INT_TRG_LEVEL)
|
|
sgpio_clrsetbits(bank->priv, REG_INT_POLARITY, addr.bit,
|
|
BIT(addr.port), polarity << addr.port);
|
|
|
|
/* Possibly re-enable interrupts */
|
|
sgpio_writel(bank->priv, ena, REG_INT_ENABLE, addr.bit);
|
|
|
|
spin_unlock_irqrestore(&bank->priv->lock, flags);
|
|
}
|
|
|
|
static void microchip_sgpio_irq_setreg(struct irq_data *data,
|
|
int reg,
|
|
bool clear)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sgpio_bank *bank = gpiochip_get_data(chip);
|
|
unsigned int gpio = irqd_to_hwirq(data);
|
|
struct sgpio_port_addr addr;
|
|
|
|
sgpio_pin_to_addr(bank->priv, gpio, &addr);
|
|
|
|
if (clear)
|
|
sgpio_clrsetbits(bank->priv, reg, addr.bit, BIT(addr.port), 0);
|
|
else
|
|
sgpio_clrsetbits(bank->priv, reg, addr.bit, 0, BIT(addr.port));
|
|
}
|
|
|
|
static void microchip_sgpio_irq_mask(struct irq_data *data)
|
|
{
|
|
microchip_sgpio_irq_setreg(data, REG_INT_ENABLE, true);
|
|
}
|
|
|
|
static void microchip_sgpio_irq_unmask(struct irq_data *data)
|
|
{
|
|
microchip_sgpio_irq_setreg(data, REG_INT_ENABLE, false);
|
|
}
|
|
|
|
static void microchip_sgpio_irq_ack(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sgpio_bank *bank = gpiochip_get_data(chip);
|
|
unsigned int gpio = irqd_to_hwirq(data);
|
|
struct sgpio_port_addr addr;
|
|
|
|
sgpio_pin_to_addr(bank->priv, gpio, &addr);
|
|
|
|
sgpio_writel(bank->priv, BIT(addr.port), REG_INT_ACK, addr.bit);
|
|
}
|
|
|
|
static int microchip_sgpio_irq_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
type &= IRQ_TYPE_SENSE_MASK;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE, 0);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE_RISE, 0);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE_FALL, 0);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_LEVEL, SGPIO_TRG_LEVEL_HIGH);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_LEVEL, SGPIO_TRG_LEVEL_LOW);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_chip microchip_sgpio_irqchip = {
|
|
.name = "gpio",
|
|
.irq_mask = microchip_sgpio_irq_mask,
|
|
.irq_ack = microchip_sgpio_irq_ack,
|
|
.irq_unmask = microchip_sgpio_irq_unmask,
|
|
.irq_set_type = microchip_sgpio_irq_set_type,
|
|
};
|
|
|
|
static void sgpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct irq_chip *parent_chip = irq_desc_get_chip(desc);
|
|
struct gpio_chip *chip = irq_desc_get_handler_data(desc);
|
|
struct sgpio_bank *bank = gpiochip_get_data(chip);
|
|
struct sgpio_priv *priv = bank->priv;
|
|
int bit, port, gpio;
|
|
long val;
|
|
|
|
for (bit = 0; bit < priv->bitcount; bit++) {
|
|
val = sgpio_readl(priv, REG_INT_IDENT, bit);
|
|
if (!val)
|
|
continue;
|
|
|
|
chained_irq_enter(parent_chip, desc);
|
|
|
|
for_each_set_bit(port, &val, SGPIO_BITS_PER_WORD) {
|
|
gpio = sgpio_addr_to_pin(priv, port, bit);
|
|
generic_handle_domain_irq(chip->irq.domain, gpio);
|
|
}
|
|
|
|
chained_irq_exit(parent_chip, desc);
|
|
}
|
|
}
|
|
|
|
static int microchip_sgpio_register_bank(struct device *dev,
|
|
struct sgpio_priv *priv,
|
|
struct fwnode_handle *fwnode,
|
|
int bankno)
|
|
{
|
|
struct pinctrl_pin_desc *pins;
|
|
struct pinctrl_desc *pctl_desc;
|
|
struct pinctrl_dev *pctldev;
|
|
struct sgpio_bank *bank;
|
|
struct gpio_chip *gc;
|
|
u32 ngpios;
|
|
int i, ret;
|
|
|
|
/* Get overall bank struct */
|
|
bank = (bankno == 0) ? &priv->in : &priv->out;
|
|
bank->priv = priv;
|
|
|
|
if (fwnode_property_read_u32(fwnode, "ngpios", &ngpios)) {
|
|
dev_info(dev, "failed to get number of gpios for bank%d\n",
|
|
bankno);
|
|
ngpios = 64;
|
|
}
|
|
|
|
priv->bitcount = ngpios / SGPIO_BITS_PER_WORD;
|
|
if (priv->bitcount > SGPIO_MAX_BITS) {
|
|
dev_err(dev, "Bit width exceeds maximum (%d)\n",
|
|
SGPIO_MAX_BITS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pctl_desc = &bank->pctl_desc;
|
|
pctl_desc->name = devm_kasprintf(dev, GFP_KERNEL, "%s-%sput",
|
|
dev_name(dev),
|
|
bank->is_input ? "in" : "out");
|
|
pctl_desc->pctlops = &sgpio_pctl_ops;
|
|
pctl_desc->pmxops = &sgpio_pmx_ops;
|
|
pctl_desc->confops = &sgpio_confops;
|
|
pctl_desc->owner = THIS_MODULE;
|
|
|
|
pins = devm_kzalloc(dev, sizeof(*pins)*ngpios, GFP_KERNEL);
|
|
if (!pins)
|
|
return -ENOMEM;
|
|
|
|
pctl_desc->npins = ngpios;
|
|
pctl_desc->pins = pins;
|
|
|
|
for (i = 0; i < ngpios; i++) {
|
|
struct sgpio_port_addr addr;
|
|
|
|
sgpio_pin_to_addr(priv, i, &addr);
|
|
|
|
pins[i].number = i;
|
|
pins[i].name = devm_kasprintf(dev, GFP_KERNEL,
|
|
"SGPIO_%c_p%db%d",
|
|
bank->is_input ? 'I' : 'O',
|
|
addr.port, addr.bit);
|
|
if (!pins[i].name)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pctldev = devm_pinctrl_register(dev, pctl_desc, bank);
|
|
if (IS_ERR(pctldev))
|
|
return dev_err_probe(dev, PTR_ERR(pctldev), "Failed to register pinctrl\n");
|
|
|
|
gc = &bank->gpio;
|
|
gc->label = pctl_desc->name;
|
|
gc->parent = dev;
|
|
gc->of_node = to_of_node(fwnode);
|
|
gc->owner = THIS_MODULE;
|
|
gc->get_direction = microchip_sgpio_get_direction;
|
|
gc->direction_input = microchip_sgpio_direction_input;
|
|
gc->direction_output = microchip_sgpio_direction_output;
|
|
gc->get = microchip_sgpio_get_value;
|
|
gc->set = microchip_sgpio_set_value;
|
|
gc->request = gpiochip_generic_request;
|
|
gc->free = gpiochip_generic_free;
|
|
gc->of_xlate = microchip_sgpio_of_xlate;
|
|
gc->of_gpio_n_cells = 3;
|
|
gc->base = -1;
|
|
gc->ngpio = ngpios;
|
|
gc->can_sleep = !bank->is_input;
|
|
|
|
if (bank->is_input && priv->properties->flags & SGPIO_FLAGS_HAS_IRQ) {
|
|
int irq = fwnode_irq_get(fwnode, 0);
|
|
|
|
if (irq) {
|
|
struct gpio_irq_chip *girq = &gc->irq;
|
|
|
|
girq->chip = devm_kmemdup(dev, µchip_sgpio_irqchip,
|
|
sizeof(microchip_sgpio_irqchip),
|
|
GFP_KERNEL);
|
|
if (!girq->chip)
|
|
return -ENOMEM;
|
|
girq->parent_handler = sgpio_irq_handler;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(dev, 1,
|
|
sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
girq->parents[0] = irq;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_bad_irq;
|
|
|
|
/* Disable all individual pins */
|
|
for (i = 0; i < SGPIO_MAX_BITS; i++)
|
|
sgpio_writel(priv, 0, REG_INT_ENABLE, i);
|
|
/* Master enable */
|
|
sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, 0, SGPIO_MASTER_INTR_ENA);
|
|
}
|
|
}
|
|
|
|
ret = devm_gpiochip_add_data(dev, gc, bank);
|
|
if (ret)
|
|
dev_err(dev, "Failed to register: ret %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int microchip_sgpio_probe(struct platform_device *pdev)
|
|
{
|
|
int div_clock = 0, ret, port, i, nbanks;
|
|
struct device *dev = &pdev->dev;
|
|
struct fwnode_handle *fwnode;
|
|
struct reset_control *reset;
|
|
struct sgpio_priv *priv;
|
|
struct clk *clk;
|
|
u32 __iomem *regs;
|
|
u32 val;
|
|
struct regmap_config regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->dev = dev;
|
|
spin_lock_init(&priv->lock);
|
|
mutex_init(&priv->poll_lock);
|
|
|
|
reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch");
|
|
if (IS_ERR(reset))
|
|
return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n");
|
|
reset_control_reset(reset);
|
|
|
|
clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n");
|
|
|
|
div_clock = clk_get_rate(clk);
|
|
if (device_property_read_u32(dev, "bus-frequency", &priv->clock))
|
|
priv->clock = 12500000;
|
|
if (priv->clock == 0 || priv->clock > (div_clock / 2)) {
|
|
dev_err(dev, "Invalid frequency %d\n", priv->clock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
priv->regs = devm_regmap_init_mmio(dev, regs, ®map_config);
|
|
if (IS_ERR(priv->regs))
|
|
return PTR_ERR(priv->regs);
|
|
|
|
priv->properties = device_get_match_data(dev);
|
|
priv->in.is_input = true;
|
|
|
|
/* Get rest of device properties */
|
|
ret = microchip_sgpio_get_ports(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
nbanks = device_get_child_node_count(dev);
|
|
if (nbanks != 2) {
|
|
dev_err(dev, "Must have 2 banks (have %d)\n", nbanks);
|
|
return -EINVAL;
|
|
}
|
|
|
|
i = 0;
|
|
device_for_each_child_node(dev, fwnode) {
|
|
ret = microchip_sgpio_register_bank(dev, priv, fwnode, i++);
|
|
if (ret) {
|
|
fwnode_handle_put(fwnode);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (priv->in.gpio.ngpio != priv->out.gpio.ngpio) {
|
|
dev_err(dev, "Banks must have same GPIO count\n");
|
|
return -ERANGE;
|
|
}
|
|
|
|
sgpio_configure_bitstream(priv);
|
|
|
|
val = max(2U, div_clock / priv->clock);
|
|
sgpio_configure_clock(priv, val);
|
|
|
|
for (port = 0; port < SGPIO_BITS_PER_WORD; port++)
|
|
sgpio_writel(priv, 0, REG_PORT_CONFIG, port);
|
|
sgpio_writel(priv, priv->ports, REG_PORT_ENABLE, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id microchip_sgpio_gpio_of_match[] = {
|
|
{
|
|
.compatible = "microchip,sparx5-sgpio",
|
|
.data = &properties_sparx5,
|
|
}, {
|
|
.compatible = "mscc,luton-sgpio",
|
|
.data = &properties_luton,
|
|
}, {
|
|
.compatible = "mscc,ocelot-sgpio",
|
|
.data = &properties_ocelot,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
|
|
static struct platform_driver microchip_sgpio_pinctrl_driver = {
|
|
.driver = {
|
|
.name = "pinctrl-microchip-sgpio",
|
|
.of_match_table = microchip_sgpio_gpio_of_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = microchip_sgpio_probe,
|
|
};
|
|
builtin_platform_driver(microchip_sgpio_pinctrl_driver);
|