mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 18:24:14 +08:00
9ebd3d822e
More LM75 updates:
- Teach the LM75 driver to use new-style driver binding:
* Create a second driver struct, using new-style driver binding
methods cribbed from the legacy code.
* Add a MODULE_DEVICE_TABLE (for "newER-style binding")
* The legacy probe logic delegates its work to this new code.
* The legacy driver now uses the name "lm75_legacy".
- More careful initialization. Chips are put into 9-bit mode so
the current interconversion routines will never fail.
- Save the original chip configuration, and restore it on exit.
(Among other things, this normally turns off the mode where
the chip is constantly sampling ... and thus saves power.)
So the new-style code should catch all chips that boards declare,
while the legacy code catches others. This particular coexistence
strategy may need some work yet ... legacy modes might best be set
up explicitly by some tool not unlike "sensors-detect". (Or else
completely eradicated...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
823 lines
25 KiB
Plaintext
823 lines
25 KiB
Plaintext
#
|
|
# Hardware monitoring chip drivers configuration
|
|
#
|
|
|
|
menuconfig HWMON
|
|
tristate "Hardware Monitoring support"
|
|
depends on HAS_IOMEM
|
|
default y
|
|
help
|
|
Hardware monitoring devices let you monitor the hardware health
|
|
of a system. Most modern motherboards include such a device. It
|
|
can include temperature sensors, voltage sensors, fan speed
|
|
sensors and various additional features such as the ability to
|
|
control the speed of the fans. If you want this support you
|
|
should say Y here and also to the specific driver(s) for your
|
|
sensors chip(s) below.
|
|
|
|
To find out which specific driver(s) you need, use the
|
|
sensors-detect script from the lm_sensors package. Read
|
|
<file:Documentation/hwmon/userspace-tools> for details.
|
|
|
|
This support can also be built as a module. If so, the module
|
|
will be called hwmon.
|
|
|
|
if HWMON
|
|
|
|
config HWMON_VID
|
|
tristate
|
|
default n
|
|
|
|
config SENSORS_ABITUGURU
|
|
tristate "Abit uGuru (rev 1 & 2)"
|
|
depends on X86 && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the sensor part of the first
|
|
and second revision of the Abit uGuru chip. The voltage and frequency
|
|
control parts of the Abit uGuru are not supported. The Abit uGuru
|
|
chip can be found on Abit uGuru featuring motherboards (most modern
|
|
Abit motherboards from before end 2005). For more info and a list
|
|
of which motherboards have which revision see
|
|
Documentation/hwmon/abituguru
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru.
|
|
|
|
config SENSORS_ABITUGURU3
|
|
tristate "Abit uGuru (rev 3)"
|
|
depends on X86 && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the sensor part of the
|
|
third revision of the Abit uGuru chip. Only reading the sensors
|
|
and their settings is supported. The third revision of the Abit
|
|
uGuru chip can be found on recent Abit motherboards (since end
|
|
2005). For more info and a list of which motherboards have which
|
|
revision see Documentation/hwmon/abituguru3
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru3.
|
|
|
|
config SENSORS_AD7418
|
|
tristate "Analog Devices AD7416, AD7417 and AD7418"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7416, AD7417 and AD7418 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7418.
|
|
|
|
config SENSORS_ADM1021
|
|
tristate "Analog Devices ADM1021 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1021
|
|
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
|
|
Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
|
|
and the XEON processor built-in sensor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1021.
|
|
|
|
config SENSORS_ADM1025
|
|
tristate "Analog Devices ADM1025 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1025
|
|
and Philips NE1619 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1025.
|
|
|
|
config SENSORS_ADM1026
|
|
tristate "Analog Devices ADM1026 and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1026
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1026.
|
|
|
|
config SENSORS_ADM1029
|
|
tristate "Analog Devices ADM1029"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1029
|
|
sensor chip.
|
|
Very rare chip, please let us know you use it.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1029.
|
|
|
|
config SENSORS_ADM1031
|
|
tristate "Analog Devices ADM1031 and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1031
|
|
and ADM1030 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1031.
|
|
|
|
config SENSORS_ADM9240
|
|
tristate "Analog Devices ADM9240 and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM9240,
|
|
Dallas DS1780, National Semiconductor LM81 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm9240.
|
|
|
|
config SENSORS_ADT7470
|
|
tristate "Analog Devices ADT7470"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7470 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7470.
|
|
|
|
config SENSORS_ADT7473
|
|
tristate "Analog Devices ADT7473"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7473 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7473.
|
|
|
|
config SENSORS_K8TEMP
|
|
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
|
depends on X86 && PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported is whole AMD K8
|
|
microarchitecture. Please note that you will need at least
|
|
lm-sensors 2.10.1 for proper userspace support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k8temp.
|
|
|
|
config SENSORS_AMS
|
|
tristate "Apple Motion Sensor driver"
|
|
depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
|
|
select INPUT_POLLDEV
|
|
help
|
|
Support for the motion sensor included in PowerBooks. Includes
|
|
implementations for PMU and I2C.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ams.
|
|
|
|
config SENSORS_AMS_PMU
|
|
bool "PMU variant"
|
|
depends on SENSORS_AMS && ADB_PMU
|
|
default y
|
|
help
|
|
PMU variant of motion sensor, found in late 2005 PowerBooks.
|
|
|
|
config SENSORS_AMS_I2C
|
|
bool "I2C variant"
|
|
depends on SENSORS_AMS && I2C
|
|
default y
|
|
help
|
|
I2C variant of motion sensor, found in early 2005 PowerBooks and
|
|
iBooks.
|
|
|
|
config SENSORS_ASB100
|
|
tristate "Asus ASB100 Bach"
|
|
depends on X86 && I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the ASB100 Bach sensor
|
|
chip found on some Asus mainboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asb100.
|
|
|
|
config SENSORS_ATXP1
|
|
tristate "Attansic ATXP1 VID controller"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Attansic ATXP1 VID
|
|
controller.
|
|
|
|
If your board have such a chip, you are able to control your CPU
|
|
core and other voltages.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called atxp1.
|
|
|
|
config SENSORS_DS1621
|
|
tristate "Dallas Semiconductor DS1621 and DS1625"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor
|
|
DS1621 and DS1625 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds1621.
|
|
|
|
config SENSORS_I5K_AMB
|
|
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
|
|
depends on PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for FB-DIMM AMB temperature
|
|
monitoring chips on systems with the Intel 5000 series chipset.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i5k_amb.
|
|
|
|
config SENSORS_F71805F
|
|
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
|
|
Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71805f.
|
|
|
|
config SENSORS_F71882FG
|
|
tristate "Fintek F71882FG and F71883FG"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F71882FG and F71883FG Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71882fg.
|
|
|
|
config SENSORS_F75375S
|
|
tristate "Fintek F75375S/SP and F75373";
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F75375S/SP and F75373
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f75375s.
|
|
|
|
config SENSORS_FSCHER
|
|
tristate "FSC Hermes"
|
|
depends on X86 && I2C
|
|
help
|
|
If you say yes here you get support for Fujitsu Siemens
|
|
Computers Hermes sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fscher.
|
|
|
|
config SENSORS_FSCPOS
|
|
tristate "FSC Poseidon"
|
|
depends on X86 && I2C
|
|
help
|
|
If you say yes here you get support for Fujitsu Siemens
|
|
Computers Poseidon sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fscpos.
|
|
|
|
config SENSORS_FSCHMD
|
|
tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
|
|
depends on X86 && I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for various Fujitsu Siemens
|
|
Computers sensor chips.
|
|
|
|
This is a new merged driver for FSC sensor chips which is intended
|
|
as a replacment for the fscpos, fscscy and fscher drivers and adds
|
|
support for several other FCS sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fschmd.
|
|
|
|
config SENSORS_GL518SM
|
|
tristate "Genesys Logic GL518SM"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL518SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl518sm.
|
|
|
|
config SENSORS_GL520SM
|
|
tristate "Genesys Logic GL520SM"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL520SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl520sm.
|
|
|
|
config SENSORS_CORETEMP
|
|
tristate "Intel Core (2) Duo/Solo temperature sensor"
|
|
depends on X86 && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU. Supported all are all known variants
|
|
of Intel Core family.
|
|
|
|
config SENSORS_IBMAEM
|
|
tristate "IBM Active Energy Manager temperature/power sensors and control"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors and capping hardware in various IBM System X
|
|
servers that support Active Energy Manager. This includes
|
|
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
|
|
and certain HS2x/LS2x/QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmaem.
|
|
|
|
config SENSORS_IBMPEX
|
|
tristate "IBM PowerExecutive temperature/power sensors"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors in various IBM System X servers that support
|
|
PowerExecutive. So far this includes the x3350, x3550, x3650,
|
|
x3655, and x3755; the x3800, x3850, and x3950 models that have
|
|
PCI Express; and some of the HS2x, LS2x, and QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmpex.
|
|
|
|
config SENSORS_IT87
|
|
tristate "ITE IT87xx and compatibles"
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for ITE IT8705F, IT8712F,
|
|
IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called it87.
|
|
|
|
config SENSORS_LM63
|
|
tristate "National Semiconductor LM63"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
LM63 remote diode digital temperature sensor with integrated fan
|
|
control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
|
|
motherboard, among others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm63.
|
|
|
|
config SENSORS_LM70
|
|
tristate "National Semiconductor LM70"
|
|
depends on SPI_MASTER && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
LM70 digital temperature sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm70.
|
|
|
|
config SENSORS_LM75
|
|
tristate "National Semiconductor LM75 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for one common type of
|
|
temperature sensor chip, with models including:
|
|
|
|
- Dallas Semiconductor DS75 and DS1775
|
|
- Maxim MAX6625 and MAX6626
|
|
- Microchip MCP980x
|
|
- National Semiconductor LM75
|
|
- NXP's LM75A
|
|
- ST Microelectronics STDS75
|
|
- TelCom (now Microchip) TCN75
|
|
- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
|
|
|
|
This driver supports driver model based binding through board
|
|
specific I2C device tables.
|
|
|
|
It also supports the "legacy" style of driver binding. To use
|
|
that with some chips which don't replicate LM75 quirks exactly,
|
|
you may need the "force" module parameter.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm75.
|
|
|
|
config SENSORS_LM77
|
|
tristate "National Semiconductor LM77"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM77
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm77.
|
|
|
|
config SENSORS_LM78
|
|
tristate "National Semiconductor LM78 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM78,
|
|
LM78-J and LM79.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm78.
|
|
|
|
config SENSORS_LM80
|
|
tristate "National Semiconductor LM80"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM80 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm80.
|
|
|
|
config SENSORS_LM83
|
|
tristate "National Semiconductor LM83 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM82 and LM83 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm83.
|
|
|
|
config SENSORS_LM85
|
|
tristate "National Semiconductor LM85 and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM85
|
|
sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm85.
|
|
|
|
config SENSORS_LM87
|
|
tristate "National Semiconductor LM87 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM87
|
|
and Analog Devices ADM1024 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm87.
|
|
|
|
config SENSORS_LM90
|
|
tristate "National Semiconductor LM90 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM90,
|
|
LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
|
|
MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
|
|
|
|
The Analog Devices ADT7461 sensor chip is also supported, but only
|
|
if found in ADM1032 compatibility mode.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm90.
|
|
|
|
config SENSORS_LM92
|
|
tristate "National Semiconductor LM92 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM92
|
|
and Maxim MAX6635 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm92.
|
|
|
|
config SENSORS_LM93
|
|
tristate "National Semiconductor LM93 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM93
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm93.
|
|
|
|
config SENSORS_MAX1619
|
|
tristate "Maxim MAX1619 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX1619 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1619.
|
|
|
|
config SENSORS_MAX6650
|
|
tristate "Maxim MAX6650 sensor chip"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the MAX6650 / MAX6651
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6650.
|
|
|
|
config SENSORS_PC87360
|
|
tristate "National Semiconductor PC87360 family"
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC8736x Super-I/O chips.
|
|
The PC87360, PC87363 and PC87364 only have fan monitoring and
|
|
control. The PC87365 and PC87366 additionally have voltage and
|
|
temperature monitoring.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87360.
|
|
|
|
config SENSORS_PC87427
|
|
tristate "National Semiconductor PC87427"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC87427 Super-I/O chip.
|
|
The chip has two distinct logical devices, one for fan speed
|
|
monitoring and control, and one for voltage and temperature
|
|
monitoring. Only fan speed monitoring is supported right now.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87427.
|
|
|
|
config SENSORS_SIS5595
|
|
tristate "Silicon Integrated Systems Corp. SiS5595"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
SiS5595 South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sis5595.
|
|
|
|
config SENSORS_DME1737
|
|
tristate "SMSC DME1737, SCH311x and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
and fan control features of the SMSC DME1737 (and compatibles
|
|
like the Asus A8000) and SCH311x Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called dme1737.
|
|
|
|
config SENSORS_SMSC47M1
|
|
tristate "SMSC LPC47M10x and compatibles"
|
|
help
|
|
If you say yes here you get support for the integrated fan
|
|
monitoring and control capabilities of the SMSC LPC47B27x,
|
|
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 chips.
|
|
|
|
The temperature and voltage sensor features of the LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 are supported by another
|
|
driver, select also "SMSC LPC47M192 and compatibles" below for
|
|
those.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m1.
|
|
|
|
config SENSORS_SMSC47M192
|
|
tristate "SMSC LPC47M192 and compatibles"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
|
|
and LPC47M997 chips.
|
|
|
|
The fan monitoring and control capabilities of these chips
|
|
are supported by another driver, select
|
|
"SMSC LPC47M10x and compatibles" above. You need both drivers
|
|
if you want fan control and voltage/temperature sensor support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m192.
|
|
|
|
config SENSORS_SMSC47B397
|
|
tristate "SMSC LPC47B397-NC"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the SMSC LPC47B397-NC
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47b397.
|
|
|
|
config SENSORS_ADS7828
|
|
tristate "Texas Instruments ADS7828"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments ADS7828
|
|
12-bit 8-channel ADC device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads7828.
|
|
|
|
config SENSORS_THMC50
|
|
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for Texas Instruments THMC50
|
|
sensor chips and clones: the Analog Devices ADM1022.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called thmc50.
|
|
|
|
config SENSORS_VIA686A
|
|
tristate "VIA686A"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
Via 686A/B South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called via686a.
|
|
|
|
config SENSORS_VT1211
|
|
tristate "VIA VT1211"
|
|
depends on EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for hardware monitoring
|
|
features of the VIA VT1211 Super-I/O chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt1211.
|
|
|
|
config SENSORS_VT8231
|
|
tristate "VIA VT8231"
|
|
depends on PCI
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for the integrated sensors
|
|
in the VIA VT8231 device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt8231.
|
|
|
|
config SENSORS_W83781D
|
|
tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W8378x series
|
|
of sensor chips: the W83781D, W83782D and W83783S, and the similar
|
|
Asus AS99127F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83781d.
|
|
|
|
config SENSORS_W83791D
|
|
tristate "Winbond W83791D"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83791D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83791d.
|
|
|
|
config SENSORS_W83792D
|
|
tristate "Winbond W83792D"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83792D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83792d.
|
|
|
|
config SENSORS_W83793
|
|
tristate "Winbond W83793"
|
|
depends on I2C && EXPERIMENTAL
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83793
|
|
hardware monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83793.
|
|
|
|
config SENSORS_W83L785TS
|
|
tristate "Winbond W83L785TS-S"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83L785TS-S
|
|
sensor chip, which is used on the Asus A7N8X, among other
|
|
motherboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l785ts.
|
|
|
|
config SENSORS_W83L786NG
|
|
tristate "Winbond W83L786NG, W83L786NR"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Winbond W83L786NG
|
|
and W83L786NR sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l786ng.
|
|
|
|
config SENSORS_W83627HF
|
|
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W836X7 series
|
|
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
|
|
W83697HF.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627hf.
|
|
|
|
config SENSORS_W83627EHF
|
|
tristate "Winbond W83627EHF/DHG"
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
|
|
|
|
This driver also supports the W83627EHG, which is the lead-free
|
|
version of the W83627EHF, and the W83627DHG, which is a similar
|
|
chip suited for specific Intel processors that use PECI such as
|
|
the Core 2 Duo.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627ehf.
|
|
|
|
config SENSORS_HDAPS
|
|
tristate "IBM Hard Drive Active Protection System (hdaps)"
|
|
depends on INPUT && X86
|
|
select INPUT_POLLDEV
|
|
default n
|
|
help
|
|
This driver provides support for the IBM Hard Drive Active Protection
|
|
System (hdaps), which provides an accelerometer and other misc. data.
|
|
ThinkPads starting with the R50, T41, and X40 are supported. The
|
|
accelerometer data is readable via sysfs.
|
|
|
|
This driver also provides an absolute input class device, allowing
|
|
the laptop to act as a pinball machine-esque joystick.
|
|
|
|
If your ThinkPad is not recognized by the driver, please update to latest
|
|
BIOS. This is especially the case for some R52 ThinkPads.
|
|
|
|
Say Y here if you have an applicable laptop and want to experience
|
|
the awesome power of hdaps.
|
|
|
|
config SENSORS_APPLESMC
|
|
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
|
|
depends on INPUT && X86
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
select INPUT_POLLDEV
|
|
default n
|
|
help
|
|
This driver provides support for the Apple System Management
|
|
Controller, which provides an accelerometer (Apple Sudden Motion
|
|
Sensor), light sensors, temperature sensors, keyboard backlight
|
|
control and fan control.
|
|
|
|
Only Intel-based Apple's computers are supported (MacBook Pro,
|
|
MacBook, MacMini).
|
|
|
|
Data from the different sensors, keyboard backlight control and fan
|
|
control are accessible via sysfs.
|
|
|
|
This driver also provides an absolute input class device, allowing
|
|
the laptop to act as a pinball machine-esque joystick.
|
|
|
|
Say Y here if you have an applicable laptop and want to experience
|
|
the awesome power of applesmc.
|
|
|
|
config HWMON_DEBUG_CHIP
|
|
bool "Hardware Monitoring Chip debugging messages"
|
|
default n
|
|
help
|
|
Say Y here if you want the I2C chip drivers to produce a bunch of
|
|
debug messages to the system log. Select this if you are having
|
|
a problem with I2C support and want to see more of what is going
|
|
on.
|
|
|
|
endif # HWMON
|