mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-06 02:24:14 +08:00
fc2021fb9b
This patch removes the use of the IRQF_DISABLED flag from drivers/block/hd.c It's a NOOP since 2.6.35 and it will be removed one day. This also removes a related comment which is obsolete too. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Jens Axboe <axboe@fb.com>
805 lines
19 KiB
C
805 lines
19 KiB
C
/*
|
|
* Copyright (C) 1991, 1992 Linus Torvalds
|
|
*
|
|
* This is the low-level hd interrupt support. It traverses the
|
|
* request-list, using interrupts to jump between functions. As
|
|
* all the functions are called within interrupts, we may not
|
|
* sleep. Special care is recommended.
|
|
*
|
|
* modified by Drew Eckhardt to check nr of hd's from the CMOS.
|
|
*
|
|
* Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
|
|
* in the early extended-partition checks and added DM partitions
|
|
*
|
|
* IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
|
|
* and general streamlining by Mark Lord.
|
|
*
|
|
* Removed 99% of above. Use Mark's ide driver for those options.
|
|
* This is now a lightweight ST-506 driver. (Paul Gortmaker)
|
|
*
|
|
* Modified 1995 Russell King for ARM processor.
|
|
*
|
|
* Bugfix: max_sectors must be <= 255 or the wheels tend to come
|
|
* off in a hurry once you queue things up - Paul G. 02/2001
|
|
*/
|
|
|
|
/* Uncomment the following if you want verbose error reports. */
|
|
/* #define VERBOSE_ERRORS */
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkpg.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/hdreg.h>
|
|
|
|
#define HD_IRQ 14
|
|
|
|
#define REALLY_SLOW_IO
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#ifdef __arm__
|
|
#undef HD_IRQ
|
|
#endif
|
|
#include <asm/irq.h>
|
|
#ifdef __arm__
|
|
#define HD_IRQ IRQ_HARDDISK
|
|
#endif
|
|
|
|
/* Hd controller regster ports */
|
|
|
|
#define HD_DATA 0x1f0 /* _CTL when writing */
|
|
#define HD_ERROR 0x1f1 /* see err-bits */
|
|
#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */
|
|
#define HD_SECTOR 0x1f3 /* starting sector */
|
|
#define HD_LCYL 0x1f4 /* starting cylinder */
|
|
#define HD_HCYL 0x1f5 /* high byte of starting cyl */
|
|
#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */
|
|
#define HD_STATUS 0x1f7 /* see status-bits */
|
|
#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
|
|
#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
|
|
#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
|
|
|
|
#define HD_CMD 0x3f6 /* used for resets */
|
|
#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
|
|
|
|
/* Bits of HD_STATUS */
|
|
#define ERR_STAT 0x01
|
|
#define INDEX_STAT 0x02
|
|
#define ECC_STAT 0x04 /* Corrected error */
|
|
#define DRQ_STAT 0x08
|
|
#define SEEK_STAT 0x10
|
|
#define SERVICE_STAT SEEK_STAT
|
|
#define WRERR_STAT 0x20
|
|
#define READY_STAT 0x40
|
|
#define BUSY_STAT 0x80
|
|
|
|
/* Bits for HD_ERROR */
|
|
#define MARK_ERR 0x01 /* Bad address mark */
|
|
#define TRK0_ERR 0x02 /* couldn't find track 0 */
|
|
#define ABRT_ERR 0x04 /* Command aborted */
|
|
#define MCR_ERR 0x08 /* media change request */
|
|
#define ID_ERR 0x10 /* ID field not found */
|
|
#define MC_ERR 0x20 /* media changed */
|
|
#define ECC_ERR 0x40 /* Uncorrectable ECC error */
|
|
#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
|
|
#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
|
|
|
|
static DEFINE_SPINLOCK(hd_lock);
|
|
static struct request_queue *hd_queue;
|
|
static struct request *hd_req;
|
|
|
|
#define TIMEOUT_VALUE (6*HZ)
|
|
#define HD_DELAY 0
|
|
|
|
#define MAX_ERRORS 16 /* Max read/write errors/sector */
|
|
#define RESET_FREQ 8 /* Reset controller every 8th retry */
|
|
#define RECAL_FREQ 4 /* Recalibrate every 4th retry */
|
|
#define MAX_HD 2
|
|
|
|
#define STAT_OK (READY_STAT|SEEK_STAT)
|
|
#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK)
|
|
|
|
static void recal_intr(void);
|
|
static void bad_rw_intr(void);
|
|
|
|
static int reset;
|
|
static int hd_error;
|
|
|
|
/*
|
|
* This struct defines the HD's and their types.
|
|
*/
|
|
struct hd_i_struct {
|
|
unsigned int head, sect, cyl, wpcom, lzone, ctl;
|
|
int unit;
|
|
int recalibrate;
|
|
int special_op;
|
|
};
|
|
|
|
#ifdef HD_TYPE
|
|
static struct hd_i_struct hd_info[] = { HD_TYPE };
|
|
static int NR_HD = ARRAY_SIZE(hd_info);
|
|
#else
|
|
static struct hd_i_struct hd_info[MAX_HD];
|
|
static int NR_HD;
|
|
#endif
|
|
|
|
static struct gendisk *hd_gendisk[MAX_HD];
|
|
|
|
static struct timer_list device_timer;
|
|
|
|
#define TIMEOUT_VALUE (6*HZ)
|
|
|
|
#define SET_TIMER \
|
|
do { \
|
|
mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \
|
|
} while (0)
|
|
|
|
static void (*do_hd)(void) = NULL;
|
|
#define SET_HANDLER(x) \
|
|
if ((do_hd = (x)) != NULL) \
|
|
SET_TIMER; \
|
|
else \
|
|
del_timer(&device_timer);
|
|
|
|
|
|
#if (HD_DELAY > 0)
|
|
|
|
#include <linux/i8253.h>
|
|
|
|
unsigned long last_req;
|
|
|
|
unsigned long read_timer(void)
|
|
{
|
|
unsigned long t, flags;
|
|
int i;
|
|
|
|
raw_spin_lock_irqsave(&i8253_lock, flags);
|
|
t = jiffies * 11932;
|
|
outb_p(0, 0x43);
|
|
i = inb_p(0x40);
|
|
i |= inb(0x40) << 8;
|
|
raw_spin_unlock_irqrestore(&i8253_lock, flags);
|
|
return(t - i);
|
|
}
|
|
#endif
|
|
|
|
static void __init hd_setup(char *str, int *ints)
|
|
{
|
|
int hdind = 0;
|
|
|
|
if (ints[0] != 3)
|
|
return;
|
|
if (hd_info[0].head != 0)
|
|
hdind = 1;
|
|
hd_info[hdind].head = ints[2];
|
|
hd_info[hdind].sect = ints[3];
|
|
hd_info[hdind].cyl = ints[1];
|
|
hd_info[hdind].wpcom = 0;
|
|
hd_info[hdind].lzone = ints[1];
|
|
hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);
|
|
NR_HD = hdind+1;
|
|
}
|
|
|
|
static bool hd_end_request(int err, unsigned int bytes)
|
|
{
|
|
if (__blk_end_request(hd_req, err, bytes))
|
|
return true;
|
|
hd_req = NULL;
|
|
return false;
|
|
}
|
|
|
|
static bool hd_end_request_cur(int err)
|
|
{
|
|
return hd_end_request(err, blk_rq_cur_bytes(hd_req));
|
|
}
|
|
|
|
static void dump_status(const char *msg, unsigned int stat)
|
|
{
|
|
char *name = "hd?";
|
|
if (hd_req)
|
|
name = hd_req->rq_disk->disk_name;
|
|
|
|
#ifdef VERBOSE_ERRORS
|
|
printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff);
|
|
if (stat & BUSY_STAT) printk("Busy ");
|
|
if (stat & READY_STAT) printk("DriveReady ");
|
|
if (stat & WRERR_STAT) printk("WriteFault ");
|
|
if (stat & SEEK_STAT) printk("SeekComplete ");
|
|
if (stat & DRQ_STAT) printk("DataRequest ");
|
|
if (stat & ECC_STAT) printk("CorrectedError ");
|
|
if (stat & INDEX_STAT) printk("Index ");
|
|
if (stat & ERR_STAT) printk("Error ");
|
|
printk("}\n");
|
|
if ((stat & ERR_STAT) == 0) {
|
|
hd_error = 0;
|
|
} else {
|
|
hd_error = inb(HD_ERROR);
|
|
printk("%s: %s: error=0x%02x { ", name, msg, hd_error & 0xff);
|
|
if (hd_error & BBD_ERR) printk("BadSector ");
|
|
if (hd_error & ECC_ERR) printk("UncorrectableError ");
|
|
if (hd_error & ID_ERR) printk("SectorIdNotFound ");
|
|
if (hd_error & ABRT_ERR) printk("DriveStatusError ");
|
|
if (hd_error & TRK0_ERR) printk("TrackZeroNotFound ");
|
|
if (hd_error & MARK_ERR) printk("AddrMarkNotFound ");
|
|
printk("}");
|
|
if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) {
|
|
printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
|
|
inb(HD_CURRENT) & 0xf, inb(HD_SECTOR));
|
|
if (hd_req)
|
|
printk(", sector=%ld", blk_rq_pos(hd_req));
|
|
}
|
|
printk("\n");
|
|
}
|
|
#else
|
|
printk("%s: %s: status=0x%02x.\n", name, msg, stat & 0xff);
|
|
if ((stat & ERR_STAT) == 0) {
|
|
hd_error = 0;
|
|
} else {
|
|
hd_error = inb(HD_ERROR);
|
|
printk("%s: %s: error=0x%02x.\n", name, msg, hd_error & 0xff);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void check_status(void)
|
|
{
|
|
int i = inb_p(HD_STATUS);
|
|
|
|
if (!OK_STATUS(i)) {
|
|
dump_status("check_status", i);
|
|
bad_rw_intr();
|
|
}
|
|
}
|
|
|
|
static int controller_busy(void)
|
|
{
|
|
int retries = 100000;
|
|
unsigned char status;
|
|
|
|
do {
|
|
status = inb_p(HD_STATUS);
|
|
} while ((status & BUSY_STAT) && --retries);
|
|
return status;
|
|
}
|
|
|
|
static int status_ok(void)
|
|
{
|
|
unsigned char status = inb_p(HD_STATUS);
|
|
|
|
if (status & BUSY_STAT)
|
|
return 1; /* Ancient, but does it make sense??? */
|
|
if (status & WRERR_STAT)
|
|
return 0;
|
|
if (!(status & READY_STAT))
|
|
return 0;
|
|
if (!(status & SEEK_STAT))
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static int controller_ready(unsigned int drive, unsigned int head)
|
|
{
|
|
int retry = 100;
|
|
|
|
do {
|
|
if (controller_busy() & BUSY_STAT)
|
|
return 0;
|
|
outb_p(0xA0 | (drive<<4) | head, HD_CURRENT);
|
|
if (status_ok())
|
|
return 1;
|
|
} while (--retry);
|
|
return 0;
|
|
}
|
|
|
|
static void hd_out(struct hd_i_struct *disk,
|
|
unsigned int nsect,
|
|
unsigned int sect,
|
|
unsigned int head,
|
|
unsigned int cyl,
|
|
unsigned int cmd,
|
|
void (*intr_addr)(void))
|
|
{
|
|
unsigned short port;
|
|
|
|
#if (HD_DELAY > 0)
|
|
while (read_timer() - last_req < HD_DELAY)
|
|
/* nothing */;
|
|
#endif
|
|
if (reset)
|
|
return;
|
|
if (!controller_ready(disk->unit, head)) {
|
|
reset = 1;
|
|
return;
|
|
}
|
|
SET_HANDLER(intr_addr);
|
|
outb_p(disk->ctl, HD_CMD);
|
|
port = HD_DATA;
|
|
outb_p(disk->wpcom >> 2, ++port);
|
|
outb_p(nsect, ++port);
|
|
outb_p(sect, ++port);
|
|
outb_p(cyl, ++port);
|
|
outb_p(cyl >> 8, ++port);
|
|
outb_p(0xA0 | (disk->unit << 4) | head, ++port);
|
|
outb_p(cmd, ++port);
|
|
}
|
|
|
|
static void hd_request (void);
|
|
|
|
static int drive_busy(void)
|
|
{
|
|
unsigned int i;
|
|
unsigned char c;
|
|
|
|
for (i = 0; i < 500000 ; i++) {
|
|
c = inb_p(HD_STATUS);
|
|
if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK)
|
|
return 0;
|
|
}
|
|
dump_status("reset timed out", c);
|
|
return 1;
|
|
}
|
|
|
|
static void reset_controller(void)
|
|
{
|
|
int i;
|
|
|
|
outb_p(4, HD_CMD);
|
|
for (i = 0; i < 1000; i++) barrier();
|
|
outb_p(hd_info[0].ctl & 0x0f, HD_CMD);
|
|
for (i = 0; i < 1000; i++) barrier();
|
|
if (drive_busy())
|
|
printk("hd: controller still busy\n");
|
|
else if ((hd_error = inb(HD_ERROR)) != 1)
|
|
printk("hd: controller reset failed: %02x\n", hd_error);
|
|
}
|
|
|
|
static void reset_hd(void)
|
|
{
|
|
static int i;
|
|
|
|
repeat:
|
|
if (reset) {
|
|
reset = 0;
|
|
i = -1;
|
|
reset_controller();
|
|
} else {
|
|
check_status();
|
|
if (reset)
|
|
goto repeat;
|
|
}
|
|
if (++i < NR_HD) {
|
|
struct hd_i_struct *disk = &hd_info[i];
|
|
disk->special_op = disk->recalibrate = 1;
|
|
hd_out(disk, disk->sect, disk->sect, disk->head-1,
|
|
disk->cyl, ATA_CMD_INIT_DEV_PARAMS, &reset_hd);
|
|
if (reset)
|
|
goto repeat;
|
|
} else
|
|
hd_request();
|
|
}
|
|
|
|
/*
|
|
* Ok, don't know what to do with the unexpected interrupts: on some machines
|
|
* doing a reset and a retry seems to result in an eternal loop. Right now I
|
|
* ignore it, and just set the timeout.
|
|
*
|
|
* On laptops (and "green" PCs), an unexpected interrupt occurs whenever the
|
|
* drive enters "idle", "standby", or "sleep" mode, so if the status looks
|
|
* "good", we just ignore the interrupt completely.
|
|
*/
|
|
static void unexpected_hd_interrupt(void)
|
|
{
|
|
unsigned int stat = inb_p(HD_STATUS);
|
|
|
|
if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) {
|
|
dump_status("unexpected interrupt", stat);
|
|
SET_TIMER;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* bad_rw_intr() now tries to be a bit smarter and does things
|
|
* according to the error returned by the controller.
|
|
* -Mika Liljeberg (liljeber@cs.Helsinki.FI)
|
|
*/
|
|
static void bad_rw_intr(void)
|
|
{
|
|
struct request *req = hd_req;
|
|
|
|
if (req != NULL) {
|
|
struct hd_i_struct *disk = req->rq_disk->private_data;
|
|
if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) {
|
|
hd_end_request_cur(-EIO);
|
|
disk->special_op = disk->recalibrate = 1;
|
|
} else if (req->errors % RESET_FREQ == 0)
|
|
reset = 1;
|
|
else if ((hd_error & TRK0_ERR) || req->errors % RECAL_FREQ == 0)
|
|
disk->special_op = disk->recalibrate = 1;
|
|
/* Otherwise just retry */
|
|
}
|
|
}
|
|
|
|
static inline int wait_DRQ(void)
|
|
{
|
|
int retries;
|
|
int stat;
|
|
|
|
for (retries = 0; retries < 100000; retries++) {
|
|
stat = inb_p(HD_STATUS);
|
|
if (stat & DRQ_STAT)
|
|
return 0;
|
|
}
|
|
dump_status("wait_DRQ", stat);
|
|
return -1;
|
|
}
|
|
|
|
static void read_intr(void)
|
|
{
|
|
struct request *req;
|
|
int i, retries = 100000;
|
|
|
|
do {
|
|
i = (unsigned) inb_p(HD_STATUS);
|
|
if (i & BUSY_STAT)
|
|
continue;
|
|
if (!OK_STATUS(i))
|
|
break;
|
|
if (i & DRQ_STAT)
|
|
goto ok_to_read;
|
|
} while (--retries > 0);
|
|
dump_status("read_intr", i);
|
|
bad_rw_intr();
|
|
hd_request();
|
|
return;
|
|
|
|
ok_to_read:
|
|
req = hd_req;
|
|
insw(HD_DATA, bio_data(req->bio), 256);
|
|
#ifdef DEBUG
|
|
printk("%s: read: sector %ld, remaining = %u, buffer=%p\n",
|
|
req->rq_disk->disk_name, blk_rq_pos(req) + 1,
|
|
blk_rq_sectors(req) - 1, bio_data(req->bio)+512);
|
|
#endif
|
|
if (hd_end_request(0, 512)) {
|
|
SET_HANDLER(&read_intr);
|
|
return;
|
|
}
|
|
|
|
(void) inb_p(HD_STATUS);
|
|
#if (HD_DELAY > 0)
|
|
last_req = read_timer();
|
|
#endif
|
|
hd_request();
|
|
}
|
|
|
|
static void write_intr(void)
|
|
{
|
|
struct request *req = hd_req;
|
|
int i;
|
|
int retries = 100000;
|
|
|
|
do {
|
|
i = (unsigned) inb_p(HD_STATUS);
|
|
if (i & BUSY_STAT)
|
|
continue;
|
|
if (!OK_STATUS(i))
|
|
break;
|
|
if ((blk_rq_sectors(req) <= 1) || (i & DRQ_STAT))
|
|
goto ok_to_write;
|
|
} while (--retries > 0);
|
|
dump_status("write_intr", i);
|
|
bad_rw_intr();
|
|
hd_request();
|
|
return;
|
|
|
|
ok_to_write:
|
|
if (hd_end_request(0, 512)) {
|
|
SET_HANDLER(&write_intr);
|
|
outsw(HD_DATA, bio_data(req->bio), 256);
|
|
return;
|
|
}
|
|
|
|
#if (HD_DELAY > 0)
|
|
last_req = read_timer();
|
|
#endif
|
|
hd_request();
|
|
}
|
|
|
|
static void recal_intr(void)
|
|
{
|
|
check_status();
|
|
#if (HD_DELAY > 0)
|
|
last_req = read_timer();
|
|
#endif
|
|
hd_request();
|
|
}
|
|
|
|
/*
|
|
* This is another of the error-routines I don't know what to do with. The
|
|
* best idea seems to just set reset, and start all over again.
|
|
*/
|
|
static void hd_times_out(unsigned long dummy)
|
|
{
|
|
char *name;
|
|
|
|
do_hd = NULL;
|
|
|
|
if (!hd_req)
|
|
return;
|
|
|
|
spin_lock_irq(hd_queue->queue_lock);
|
|
reset = 1;
|
|
name = hd_req->rq_disk->disk_name;
|
|
printk("%s: timeout\n", name);
|
|
if (++hd_req->errors >= MAX_ERRORS) {
|
|
#ifdef DEBUG
|
|
printk("%s: too many errors\n", name);
|
|
#endif
|
|
hd_end_request_cur(-EIO);
|
|
}
|
|
hd_request();
|
|
spin_unlock_irq(hd_queue->queue_lock);
|
|
}
|
|
|
|
static int do_special_op(struct hd_i_struct *disk, struct request *req)
|
|
{
|
|
if (disk->recalibrate) {
|
|
disk->recalibrate = 0;
|
|
hd_out(disk, disk->sect, 0, 0, 0, ATA_CMD_RESTORE, &recal_intr);
|
|
return reset;
|
|
}
|
|
if (disk->head > 16) {
|
|
printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name);
|
|
hd_end_request_cur(-EIO);
|
|
}
|
|
disk->special_op = 0;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* The driver enables interrupts as much as possible. In order to do this,
|
|
* (a) the device-interrupt is disabled before entering hd_request(),
|
|
* and (b) the timeout-interrupt is disabled before the sti().
|
|
*
|
|
* Interrupts are still masked (by default) whenever we are exchanging
|
|
* data/cmds with a drive, because some drives seem to have very poor
|
|
* tolerance for latency during I/O. The IDE driver has support to unmask
|
|
* interrupts for non-broken hardware, so use that driver if required.
|
|
*/
|
|
static void hd_request(void)
|
|
{
|
|
unsigned int block, nsect, sec, track, head, cyl;
|
|
struct hd_i_struct *disk;
|
|
struct request *req;
|
|
|
|
if (do_hd)
|
|
return;
|
|
repeat:
|
|
del_timer(&device_timer);
|
|
|
|
if (!hd_req) {
|
|
hd_req = blk_fetch_request(hd_queue);
|
|
if (!hd_req) {
|
|
do_hd = NULL;
|
|
return;
|
|
}
|
|
}
|
|
req = hd_req;
|
|
|
|
if (reset) {
|
|
reset_hd();
|
|
return;
|
|
}
|
|
disk = req->rq_disk->private_data;
|
|
block = blk_rq_pos(req);
|
|
nsect = blk_rq_sectors(req);
|
|
if (block >= get_capacity(req->rq_disk) ||
|
|
((block+nsect) > get_capacity(req->rq_disk))) {
|
|
printk("%s: bad access: block=%d, count=%d\n",
|
|
req->rq_disk->disk_name, block, nsect);
|
|
hd_end_request_cur(-EIO);
|
|
goto repeat;
|
|
}
|
|
|
|
if (disk->special_op) {
|
|
if (do_special_op(disk, req))
|
|
goto repeat;
|
|
return;
|
|
}
|
|
sec = block % disk->sect + 1;
|
|
track = block / disk->sect;
|
|
head = track % disk->head;
|
|
cyl = track / disk->head;
|
|
#ifdef DEBUG
|
|
printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n",
|
|
req->rq_disk->disk_name,
|
|
req_data_dir(req) == READ ? "read" : "writ",
|
|
cyl, head, sec, nsect, bio_data(req->bio));
|
|
#endif
|
|
if (req->cmd_type == REQ_TYPE_FS) {
|
|
switch (rq_data_dir(req)) {
|
|
case READ:
|
|
hd_out(disk, nsect, sec, head, cyl, ATA_CMD_PIO_READ,
|
|
&read_intr);
|
|
if (reset)
|
|
goto repeat;
|
|
break;
|
|
case WRITE:
|
|
hd_out(disk, nsect, sec, head, cyl, ATA_CMD_PIO_WRITE,
|
|
&write_intr);
|
|
if (reset)
|
|
goto repeat;
|
|
if (wait_DRQ()) {
|
|
bad_rw_intr();
|
|
goto repeat;
|
|
}
|
|
outsw(HD_DATA, bio_data(req->bio), 256);
|
|
break;
|
|
default:
|
|
printk("unknown hd-command\n");
|
|
hd_end_request_cur(-EIO);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void do_hd_request(struct request_queue *q)
|
|
{
|
|
hd_request();
|
|
}
|
|
|
|
static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
|
|
{
|
|
struct hd_i_struct *disk = bdev->bd_disk->private_data;
|
|
|
|
geo->heads = disk->head;
|
|
geo->sectors = disk->sect;
|
|
geo->cylinders = disk->cyl;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Releasing a block device means we sync() it, so that it can safely
|
|
* be forgotten about...
|
|
*/
|
|
|
|
static irqreturn_t hd_interrupt(int irq, void *dev_id)
|
|
{
|
|
void (*handler)(void) = do_hd;
|
|
|
|
spin_lock(hd_queue->queue_lock);
|
|
|
|
do_hd = NULL;
|
|
del_timer(&device_timer);
|
|
if (!handler)
|
|
handler = unexpected_hd_interrupt;
|
|
handler();
|
|
|
|
spin_unlock(hd_queue->queue_lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct block_device_operations hd_fops = {
|
|
.getgeo = hd_getgeo,
|
|
};
|
|
|
|
static int __init hd_init(void)
|
|
{
|
|
int drive;
|
|
|
|
if (register_blkdev(HD_MAJOR, "hd"))
|
|
return -1;
|
|
|
|
hd_queue = blk_init_queue(do_hd_request, &hd_lock);
|
|
if (!hd_queue) {
|
|
unregister_blkdev(HD_MAJOR, "hd");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
blk_queue_max_hw_sectors(hd_queue, 255);
|
|
init_timer(&device_timer);
|
|
device_timer.function = hd_times_out;
|
|
blk_queue_logical_block_size(hd_queue, 512);
|
|
|
|
if (!NR_HD) {
|
|
/*
|
|
* We don't know anything about the drive. This means
|
|
* that you *MUST* specify the drive parameters to the
|
|
* kernel yourself.
|
|
*
|
|
* If we were on an i386, we used to read this info from
|
|
* the BIOS or CMOS. This doesn't work all that well,
|
|
* since this assumes that this is a primary or secondary
|
|
* drive, and if we're using this legacy driver, it's
|
|
* probably an auxiliary controller added to recover
|
|
* legacy data off an ST-506 drive. Either way, it's
|
|
* definitely safest to have the user explicitly specify
|
|
* the information.
|
|
*/
|
|
printk("hd: no drives specified - use hd=cyl,head,sectors"
|
|
" on kernel command line\n");
|
|
goto out;
|
|
}
|
|
|
|
for (drive = 0 ; drive < NR_HD ; drive++) {
|
|
struct gendisk *disk = alloc_disk(64);
|
|
struct hd_i_struct *p = &hd_info[drive];
|
|
if (!disk)
|
|
goto Enomem;
|
|
disk->major = HD_MAJOR;
|
|
disk->first_minor = drive << 6;
|
|
disk->fops = &hd_fops;
|
|
sprintf(disk->disk_name, "hd%c", 'a'+drive);
|
|
disk->private_data = p;
|
|
set_capacity(disk, p->head * p->sect * p->cyl);
|
|
disk->queue = hd_queue;
|
|
p->unit = drive;
|
|
hd_gendisk[drive] = disk;
|
|
printk("%s: %luMB, CHS=%d/%d/%d\n",
|
|
disk->disk_name, (unsigned long)get_capacity(disk)/2048,
|
|
p->cyl, p->head, p->sect);
|
|
}
|
|
|
|
if (request_irq(HD_IRQ, hd_interrupt, 0, "hd", NULL)) {
|
|
printk("hd: unable to get IRQ%d for the hard disk driver\n",
|
|
HD_IRQ);
|
|
goto out1;
|
|
}
|
|
if (!request_region(HD_DATA, 8, "hd")) {
|
|
printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA);
|
|
goto out2;
|
|
}
|
|
if (!request_region(HD_CMD, 1, "hd(cmd)")) {
|
|
printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD);
|
|
goto out3;
|
|
}
|
|
|
|
/* Let them fly */
|
|
for (drive = 0; drive < NR_HD; drive++)
|
|
add_disk(hd_gendisk[drive]);
|
|
|
|
return 0;
|
|
|
|
out3:
|
|
release_region(HD_DATA, 8);
|
|
out2:
|
|
free_irq(HD_IRQ, NULL);
|
|
out1:
|
|
for (drive = 0; drive < NR_HD; drive++)
|
|
put_disk(hd_gendisk[drive]);
|
|
NR_HD = 0;
|
|
out:
|
|
del_timer(&device_timer);
|
|
unregister_blkdev(HD_MAJOR, "hd");
|
|
blk_cleanup_queue(hd_queue);
|
|
return -1;
|
|
Enomem:
|
|
while (drive--)
|
|
put_disk(hd_gendisk[drive]);
|
|
goto out;
|
|
}
|
|
|
|
static int __init parse_hd_setup(char *line)
|
|
{
|
|
int ints[6];
|
|
|
|
(void) get_options(line, ARRAY_SIZE(ints), ints);
|
|
hd_setup(NULL, ints);
|
|
|
|
return 1;
|
|
}
|
|
__setup("hd=", parse_hd_setup);
|
|
|
|
late_initcall(hd_init);
|