linux/drivers/media/dvb/mantis/mantis_ca.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

209 lines
5.6 KiB
C

/*
Mantis PCI bridge driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_link.h"
#include "mantis_hif.h"
#include "mantis_reg.h"
#include "mantis_ca.h"
static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
if (slot != 0)
return -EINVAL;
return mantis_hif_read_mem(ca, addr);
}
static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
if (slot != 0)
return -EINVAL;
return mantis_hif_write_mem(ca, addr, data);
}
static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
if (slot != 0)
return -EINVAL;
return mantis_hif_read_iom(ca, addr);
}
static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
if (slot != 0)
return -EINVAL;
return mantis_hif_write_iom(ca, addr, data);
}
static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
udelay(500); /* Wait.. */
mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
udelay(500);
mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */
msleep(1000);
dvb_ca_en50221_camready_irq(&ca->en50221, 0);
return 0;
}
static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
return 0;
}
static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
return 0;
}
static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
if (ca->slot_state == MODULE_INSERTED) {
dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
} else {
dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
}
return 0;
}
int mantis_ca_init(struct mantis_pci *mantis)
{
struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
struct mantis_ca *ca;
int ca_flags = 0, result;
dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL);
if (!ca) {
dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
result = -ENOMEM;
goto err;
}
ca->ca_priv = mantis;
mantis->mantis_ca = ca;
ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
/* register CA interface */
ca->en50221.owner = THIS_MODULE;
ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem;
ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem;
ca->en50221.read_cam_control = mantis_ca_read_cam_ctl;
ca->en50221.write_cam_control = mantis_ca_write_cam_ctl;
ca->en50221.slot_reset = mantis_ca_slot_reset;
ca->en50221.slot_shutdown = mantis_ca_slot_shutdown;
ca->en50221.slot_ts_enable = mantis_ts_control;
ca->en50221.poll_slot_status = mantis_slot_status;
ca->en50221.data = ca;
mutex_init(&ca->ca_lock);
init_waitqueue_head(&ca->hif_data_wq);
init_waitqueue_head(&ca->hif_opdone_wq);
init_waitqueue_head(&ca->hif_write_wq);
dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
if (result != 0) {
dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
goto err;
}
dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
mantis_evmgr_init(ca);
return 0;
err:
kfree(ca);
return result;
}
EXPORT_SYMBOL_GPL(mantis_ca_init);
void mantis_ca_exit(struct mantis_pci *mantis)
{
struct mantis_ca *ca = mantis->mantis_ca;
dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
mantis_evmgr_exit(ca);
dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
if (ca)
dvb_ca_en50221_release(&ca->en50221);
kfree(ca);
}
EXPORT_SYMBOL_GPL(mantis_ca_exit);