mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-30 07:34:12 +08:00
4e210fbeee
Add support for the 3.3V booster regulator embedded in stm32h7 and stm32mp1 devices, that can be used to supply ADC analog input switches. This regulator is supplied by vdda. It's controlled by using SYSCFG: - STM32H7 has a unique register to set/clear the booster enable bit - STM32MP1 has separate set and clear registers to configure it. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
1093 lines
34 KiB
Plaintext
1093 lines
34 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menuconfig REGULATOR
|
|
bool "Voltage and Current Regulator Support"
|
|
help
|
|
Generic Voltage and Current Regulator support.
|
|
|
|
This framework is designed to provide a generic interface to voltage
|
|
and current regulators within the Linux kernel. It's intended to
|
|
provide voltage and current control to client or consumer drivers and
|
|
also provide status information to user space applications through a
|
|
sysfs interface.
|
|
|
|
The intention is to allow systems to dynamically control regulator
|
|
output in order to save power and prolong battery life. This applies
|
|
to both voltage regulators (where voltage output is controllable) and
|
|
current sinks (where current output is controllable).
|
|
|
|
This framework safely compiles out if not selected so that client
|
|
drivers can still be used in systems with no software controllable
|
|
regulators.
|
|
|
|
If unsure, say no.
|
|
|
|
|
|
if REGULATOR
|
|
|
|
config REGULATOR_DEBUG
|
|
bool "Regulator debug support"
|
|
help
|
|
Say yes here to enable debugging support.
|
|
|
|
config REGULATOR_FIXED_VOLTAGE
|
|
tristate "Fixed voltage regulator support"
|
|
help
|
|
This driver provides support for fixed voltage regulators,
|
|
useful for systems which use a combination of software
|
|
managed regulators and simple non-configurable regulators.
|
|
|
|
config REGULATOR_VIRTUAL_CONSUMER
|
|
tristate "Virtual regulator consumer support"
|
|
help
|
|
This driver provides a virtual consumer for the voltage and
|
|
current regulator API which provides sysfs controls for
|
|
configuring the supplies requested. This is mainly useful
|
|
for test purposes.
|
|
|
|
If unsure, say no.
|
|
|
|
config REGULATOR_USERSPACE_CONSUMER
|
|
tristate "Userspace regulator consumer support"
|
|
help
|
|
There are some classes of devices that are controlled entirely
|
|
from user space. Userspace consumer driver provides ability to
|
|
control power supplies for such devices.
|
|
|
|
If unsure, say no.
|
|
|
|
config REGULATOR_88PG86X
|
|
tristate "Marvell 88PG86X voltage regulators"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
|
|
They provide two I2C-controlled DC/DC step-down converters with
|
|
sleep mode and separate enable pins.
|
|
|
|
config REGULATOR_88PM800
|
|
tristate "Marvell 88PM800 Power regulators"
|
|
depends on MFD_88PM800
|
|
help
|
|
This driver supports Marvell 88PM800 voltage regulator chips.
|
|
It delivers digitally programmable output,
|
|
the voltage is programmed via I2C interface.
|
|
It's suitable to support PXA988 chips to control VCC_MAIN and
|
|
various voltages.
|
|
|
|
config REGULATOR_88PM8607
|
|
tristate "Marvell 88PM8607 Power regulators"
|
|
depends on MFD_88PM860X=y
|
|
help
|
|
This driver supports 88PM8607 voltage regulator chips.
|
|
|
|
config REGULATOR_ACT8865
|
|
tristate "Active-semi act8865 voltage regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver controls a active-semi act8865 voltage output
|
|
regulator via I2C bus.
|
|
|
|
config REGULATOR_ACT8945A
|
|
tristate "Active-semi ACT8945A voltage regulator"
|
|
depends on MFD_ACT8945A
|
|
help
|
|
This driver controls a active-semi ACT8945A voltage regulator
|
|
via I2C bus. The ACT8945A features three step-down DC/DC converters
|
|
and four low-dropout linear regulators, along with a ActivePath
|
|
battery charger.
|
|
|
|
config REGULATOR_AD5398
|
|
tristate "Analog Devices AD5398/AD5821 regulators"
|
|
depends on I2C
|
|
help
|
|
This driver supports AD5398 and AD5821 current regulator chips.
|
|
If building into module, its name is ad5398.ko.
|
|
|
|
config REGULATOR_ANATOP
|
|
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
|
|
depends on MFD_SYSCON
|
|
help
|
|
Say y here to support Freescale i.MX on-chip ANATOP LDOs
|
|
regulators. It is recommended that this option be
|
|
enabled on i.MX6 platform.
|
|
|
|
config REGULATOR_AAT2870
|
|
tristate "AnalogicTech AAT2870 Regulators"
|
|
depends on MFD_AAT2870_CORE
|
|
help
|
|
If you have a AnalogicTech AAT2870 say Y to enable the
|
|
regulator driver.
|
|
|
|
config REGULATOR_AB3100
|
|
tristate "ST-Ericsson AB3100 Regulator functions"
|
|
depends on AB3100_CORE
|
|
default y if AB3100_CORE
|
|
help
|
|
These regulators correspond to functionality in the
|
|
AB3100 analog baseband dealing with power regulators
|
|
for the system.
|
|
|
|
config REGULATOR_AB8500
|
|
bool "ST-Ericsson AB8500 Power Regulators"
|
|
depends on AB8500_CORE
|
|
help
|
|
This driver supports the regulators found on the ST-Ericsson mixed
|
|
signal AB8500 PMIC
|
|
|
|
config REGULATOR_ARIZONA_LDO1
|
|
tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
|
|
depends on MFD_ARIZONA || MFD_MADERA
|
|
depends on SND_SOC
|
|
help
|
|
Support for the LDO1 regulators found on Cirrus Logic Madera codecs
|
|
and Wolfson Microelectronic Arizona codecs.
|
|
|
|
config REGULATOR_ARIZONA_MICSUPP
|
|
tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
|
|
depends on MFD_ARIZONA || MFD_MADERA
|
|
depends on SND_SOC
|
|
help
|
|
Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
|
|
and Wolfson Microelectronic Arizona codecs
|
|
devices.
|
|
|
|
config REGULATOR_AS3711
|
|
tristate "AS3711 PMIC"
|
|
depends on MFD_AS3711
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
AS3711 PMIC
|
|
|
|
config REGULATOR_AS3722
|
|
tristate "AMS AS3722 PMIC Regulators"
|
|
depends on MFD_AS3722
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
AS3722 PMIC. This will enable support for all the software
|
|
controllable DCDC/LDO regulators.
|
|
|
|
config REGULATOR_AXP20X
|
|
tristate "X-POWERS AXP20X PMIC Regulators"
|
|
depends on MFD_AXP20X
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
AXP20X PMIC.
|
|
|
|
config REGULATOR_BCM590XX
|
|
tristate "Broadcom BCM590xx PMU Regulators"
|
|
depends on MFD_BCM590XX
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
BCM590xx PMUs. This will enable support for the software
|
|
controllable LDO/Switching regulators.
|
|
|
|
config REGULATOR_BD70528
|
|
tristate "ROHM BD70528 Power Regulator"
|
|
depends on MFD_ROHM_BD70528
|
|
help
|
|
This driver supports voltage regulators on ROHM BD70528 PMIC.
|
|
This will enable support for the software controllable buck
|
|
and LDO regulators.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called bd70528-regulator.
|
|
|
|
config REGULATOR_BD718XX
|
|
tristate "ROHM BD71837 Power Regulator"
|
|
depends on MFD_ROHM_BD718XX
|
|
help
|
|
This driver supports voltage regulators on ROHM BD71837 PMIC.
|
|
This will enable support for the software controllable buck
|
|
and LDO regulators.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called bd718x7-regulator.
|
|
|
|
config REGULATOR_BD9571MWV
|
|
tristate "ROHM BD9571MWV Regulators"
|
|
depends on MFD_BD9571MWV
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
ROHM BD9571MWV PMIC. This will enable support for the software
|
|
controllable regulator and voltage sampling units.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called bd9571mwv-regulator.
|
|
|
|
config REGULATOR_CPCAP
|
|
tristate "Motorola CPCAP regulator"
|
|
depends on MFD_CPCAP
|
|
help
|
|
Say y here for CPCAP regulator found on some Motorola phones
|
|
and tablets such as Droid 4.
|
|
|
|
config REGULATOR_DA903X
|
|
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
|
|
depends on PMIC_DA903X
|
|
depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
|
|
help
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
Dialog Semiconductor DA9030/DA9034 PMIC.
|
|
|
|
config REGULATOR_DA9052
|
|
tristate "Dialog Semiconductor DA9052/DA9053 regulators"
|
|
depends on PMIC_DA9052
|
|
help
|
|
This driver supports the voltage regulators of DA9052-BC and
|
|
DA9053-AA/Bx PMIC.
|
|
|
|
config REGULATOR_DA9055
|
|
tristate "Dialog Semiconductor DA9055 regulators"
|
|
depends on MFD_DA9055
|
|
help
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
Dialog Semiconductor DA9055 PMIC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called da9055-regulator.
|
|
|
|
config REGULATOR_DA9062
|
|
tristate "Dialog Semiconductor DA9061/62 regulators"
|
|
depends on MFD_DA9062
|
|
help
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
DA9061 and DA9062 PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called da9062-regulator.
|
|
|
|
config REGULATOR_DA9063
|
|
tristate "Dialog Semiconductor DA9063 regulators"
|
|
depends on MFD_DA9063 && OF
|
|
help
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
DA9063 PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called da9063-regulator.
|
|
|
|
config REGULATOR_DA9210
|
|
tristate "Dialog Semiconductor DA9210 regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support for the Dialog Semiconductor DA9210.
|
|
The DA9210 is a multi-phase synchronous step down
|
|
converter 12A DC-DC Buck controlled through an I2C
|
|
interface.
|
|
|
|
config REGULATOR_DA9211
|
|
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support for the Dialog Semiconductor DA9211/DA9212
|
|
/DA9213/DA9214/DA9215.
|
|
The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
|
|
step down converter 12A or 16A DC-DC Buck controlled through an I2C
|
|
interface.
|
|
|
|
config REGULATOR_DBX500_PRCMU
|
|
bool
|
|
|
|
config REGULATOR_DB8500_PRCMU
|
|
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
|
|
depends on MFD_DB8500_PRCMU
|
|
select REGULATOR_DBX500_PRCMU
|
|
help
|
|
This driver supports the voltage domain regulators controlled by the
|
|
DB8500 PRCMU
|
|
|
|
config REGULATOR_FAN53555
|
|
tristate "Fairchild FAN53555 Regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports Fairchild FAN53555 Digitally Programmable
|
|
TinyBuck Regulator. The FAN53555 is a step-down switching voltage
|
|
regulator that delivers a digitally programmable output from an
|
|
input voltage supply of 2.5V to 5.5V. The output voltage is
|
|
programmed through an I2C interface.
|
|
|
|
config REGULATOR_GPIO
|
|
tristate "GPIO regulator support"
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
This driver provides support for regulators that can be
|
|
controlled via gpios.
|
|
It is capable of supporting current and voltage regulators
|
|
and the platform has to provide a mapping of GPIO-states
|
|
to target volts/amps.
|
|
|
|
config REGULATOR_HI6421
|
|
tristate "HiSilicon Hi6421 PMIC voltage regulator support"
|
|
depends on MFD_HI6421_PMIC && OF
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
HiSilicon Hi6421 PMU / Codec IC.
|
|
Hi6421 is a multi-function device which, on regulator part, provides
|
|
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
|
|
of them come with support to either ECO (idle) or sleep mode.
|
|
|
|
config REGULATOR_HI6421V530
|
|
tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
|
|
depends on MFD_HI6421_PMIC && OF
|
|
help
|
|
This driver provides support for the voltage regulators on
|
|
HiSilicon Hi6421v530 PMU / Codec IC.
|
|
Hi6421v530 is a multi-function device which, on regulator part,
|
|
provides 5 general purpose LDOs, and all of them come with support
|
|
to either ECO (idle) or sleep mode.
|
|
|
|
config REGULATOR_HI655X
|
|
tristate "Hisilicon HI655X PMIC regulators support"
|
|
depends on ARCH_HISI || COMPILE_TEST
|
|
depends on MFD_HI655X_PMIC && OF
|
|
help
|
|
This driver provides support for the voltage regulators of the
|
|
Hisilicon Hi655x PMIC device.
|
|
|
|
config REGULATOR_ISL9305
|
|
tristate "Intersil ISL9305 regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports ISL9305 voltage regulator chip.
|
|
|
|
config REGULATOR_ISL6271A
|
|
tristate "Intersil ISL6271A Power regulator"
|
|
depends on I2C
|
|
help
|
|
This driver supports ISL6271A voltage regulator chip.
|
|
|
|
config REGULATOR_LM363X
|
|
tristate "TI LM363X voltage regulators"
|
|
depends on MFD_TI_LMU
|
|
help
|
|
This driver supports LM3631 and LM3632 voltage regulators for
|
|
the LCD bias.
|
|
One boost output voltage is configurable and always on.
|
|
Other LDOs are used for the display module.
|
|
|
|
config REGULATOR_LOCHNAGAR
|
|
tristate "Cirrus Logic Lochnagar regulator driver"
|
|
depends on MFD_LOCHNAGAR
|
|
help
|
|
This enables regulator support on the Cirrus Logic Lochnagar audio
|
|
development board.
|
|
|
|
config REGULATOR_LP3971
|
|
tristate "National Semiconductors LP3971 PMIC regulator driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here to support the voltage regulators and convertors
|
|
on National Semiconductors LP3971 PMIC
|
|
|
|
config REGULATOR_LP3972
|
|
tristate "National Semiconductors LP3972 PMIC regulator driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here to support the voltage regulators and convertors
|
|
on National Semiconductors LP3972 PMIC
|
|
|
|
config REGULATOR_LP872X
|
|
tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports LP8720/LP8725 PMIC
|
|
|
|
config REGULATOR_LP873X
|
|
tristate "TI LP873X Power regulators"
|
|
depends on MFD_TI_LP873X && OF
|
|
help
|
|
This driver supports LP873X voltage regulator chips. LP873X
|
|
provides two step-down converters and two general-purpose LDO
|
|
voltage regulators. It supports software based voltage control
|
|
for different voltage domains
|
|
|
|
config REGULATOR_LP8755
|
|
tristate "TI LP8755 High Performance PMU driver"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports LP8755 High Performance PMU driver. This
|
|
chip contains six step-down DC/DC converters which can support
|
|
9 mode multiphase configuration.
|
|
|
|
config REGULATOR_LP87565
|
|
tristate "TI LP87565 Power regulators"
|
|
depends on MFD_TI_LP87565 && OF
|
|
help
|
|
This driver supports LP87565 voltage regulator chips. LP87565
|
|
provides four step-down converters. It supports software based
|
|
voltage control for different voltage domains
|
|
|
|
config REGULATOR_LP8788
|
|
tristate "TI LP8788 Power Regulators"
|
|
depends on MFD_LP8788
|
|
help
|
|
This driver supports LP8788 voltage regulator chip.
|
|
|
|
config REGULATOR_LTC3589
|
|
tristate "LTC3589 8-output voltage regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This enables support for the LTC3589, LTC3589-1, and LTC3589-2
|
|
8-output regulators controlled via I2C.
|
|
|
|
config REGULATOR_LTC3676
|
|
tristate "LTC3676 8-output voltage regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This enables support for the LTC3676
|
|
8-output regulators controlled via I2C.
|
|
|
|
config REGULATOR_MAX14577
|
|
tristate "Maxim 14577/77836 regulator"
|
|
depends on MFD_MAX14577
|
|
help
|
|
This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
|
|
The MAX14577 regulators include safeout LDO and charger current
|
|
regulator. The MAX77836 has two additional LDOs.
|
|
|
|
config REGULATOR_MAX1586
|
|
tristate "Maxim 1586/1587 voltage regulator"
|
|
depends on I2C
|
|
help
|
|
This driver controls a Maxim 1586 or 1587 voltage output
|
|
regulator via I2C bus. The provided regulator is suitable
|
|
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
|
|
|
|
config REGULATOR_MAX77620
|
|
tristate "Maxim 77620/MAX20024 voltage regulator"
|
|
depends on MFD_MAX77620
|
|
help
|
|
This driver controls Maxim MAX77620 voltage output regulator
|
|
via I2C bus. The provided regulator is suitable for Tegra
|
|
chip to control Step-Down DC-DC and LDOs. Say Y here to
|
|
enable the regulator driver.
|
|
|
|
config REGULATOR_MAX77650
|
|
tristate "Maxim MAX77650/77651 regulator support"
|
|
depends on MFD_MAX77650
|
|
help
|
|
Regulator driver for MAX77650/77651 PMIC from Maxim
|
|
Semiconductor. This device has a SIMO with three independent
|
|
power rails and an LDO.
|
|
|
|
config REGULATOR_MAX8649
|
|
tristate "Maxim 8649 voltage regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver controls a Maxim 8649 voltage output regulator via
|
|
I2C bus.
|
|
|
|
config REGULATOR_MAX8660
|
|
tristate "Maxim 8660/8661 voltage regulator"
|
|
depends on I2C
|
|
help
|
|
This driver controls a Maxim 8660/8661 voltage output
|
|
regulator via I2C bus.
|
|
|
|
config REGULATOR_MAX8907
|
|
tristate "Maxim 8907 voltage regulator"
|
|
depends on MFD_MAX8907
|
|
help
|
|
This driver controls a Maxim 8907 voltage output regulator
|
|
via I2C bus. The provided regulator is suitable for Tegra
|
|
chip to control Step-Down DC-DC and LDOs.
|
|
|
|
config REGULATOR_MAX8925
|
|
tristate "Maxim MAX8925 Power Management IC"
|
|
depends on MFD_MAX8925
|
|
help
|
|
Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
|
|
|
|
config REGULATOR_MAX8952
|
|
tristate "Maxim MAX8952 Power Management IC"
|
|
depends on I2C
|
|
help
|
|
This driver controls a Maxim 8952 voltage output regulator
|
|
via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
|
|
modes ranging from 0.77V to 1.40V by 0.01V steps.
|
|
|
|
config REGULATOR_MAX8973
|
|
tristate "Maxim MAX8973 voltage regulator "
|
|
depends on I2C
|
|
depends on THERMAL && THERMAL_OF
|
|
select REGMAP_I2C
|
|
help
|
|
The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
|
|
switching regulator delivers up to 9A of output current. Each
|
|
phase operates at a 2MHz fixed frequency with a 120 deg shift
|
|
from the adjacent phase, allowing the use of small magnetic component.
|
|
|
|
config REGULATOR_MAX8997
|
|
tristate "Maxim 8997/8966 regulator"
|
|
depends on MFD_MAX8997
|
|
help
|
|
This driver controls a Maxim 8997/8966 regulator
|
|
via I2C bus. The provided regulator is suitable for S5PC110,
|
|
S5PV210, and Exynos-4 chips to control VCC_CORE and
|
|
VCC_USIM voltages.
|
|
|
|
config REGULATOR_MAX8998
|
|
tristate "Maxim 8998 voltage regulator"
|
|
depends on MFD_MAX8998
|
|
help
|
|
This driver controls a Maxim 8998 voltage output regulator
|
|
via I2C bus. The provided regulator is suitable for S3C6410
|
|
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
|
|
|
|
config REGULATOR_MAX77686
|
|
tristate "Maxim 77686 regulator"
|
|
depends on MFD_MAX77686
|
|
help
|
|
This driver controls a Maxim 77686 regulator
|
|
via I2C bus. The provided regulator is suitable for
|
|
Exynos-4 chips to control VARM and VINT voltages.
|
|
|
|
config REGULATOR_MAX77693
|
|
tristate "Maxim 77693/77843 regulator"
|
|
depends on (MFD_MAX77693 || MFD_MAX77843)
|
|
help
|
|
This driver controls a Maxim 77693/77843 regulators via I2C bus.
|
|
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
|
|
and one current regulator 'CHARGER'. This is suitable for
|
|
Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
|
|
|
|
config REGULATOR_MAX77802
|
|
tristate "Maxim 77802 regulator"
|
|
depends on MFD_MAX77686
|
|
help
|
|
This driver controls a Maxim 77802 regulator
|
|
via I2C bus. The provided regulator is suitable for
|
|
Exynos5420/Exynos5800 SoCs to control various voltages.
|
|
It includes support for control of voltage and ramp speed.
|
|
|
|
config REGULATOR_MC13XXX_CORE
|
|
tristate
|
|
|
|
config REGULATOR_MC13783
|
|
tristate "Freescale MC13783 regulator driver"
|
|
depends on MFD_MC13XXX
|
|
select REGULATOR_MC13XXX_CORE
|
|
help
|
|
Say y here to support the regulators found on the Freescale MC13783
|
|
PMIC.
|
|
|
|
config REGULATOR_MC13892
|
|
tristate "Freescale MC13892 regulator driver"
|
|
depends on MFD_MC13XXX
|
|
select REGULATOR_MC13XXX_CORE
|
|
help
|
|
Say y here to support the regulators found on the Freescale MC13892
|
|
PMIC.
|
|
|
|
config REGULATOR_MCP16502
|
|
tristate "Microchip MCP16502 PMIC"
|
|
depends on I2C && OF
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support the MCP16502 PMIC. This driver supports
|
|
basic operations (get/set voltage, get/set operating mode)
|
|
through the regulator interface. In addition it enables
|
|
suspend-to-ram/standby transition.
|
|
|
|
config REGULATOR_MT6311
|
|
tristate "MediaTek MT6311 PMIC"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to select this option to enable the power regulator of
|
|
MediaTek MT6311 PMIC.
|
|
This driver supports the control of different power rails of device
|
|
through regulator interface.
|
|
|
|
config REGULATOR_MT6323
|
|
tristate "MediaTek MT6323 PMIC"
|
|
depends on MFD_MT6397
|
|
help
|
|
Say y here to select this option to enable the power regulator of
|
|
MediaTek MT6323 PMIC.
|
|
This driver supports the control of different power rails of device
|
|
through regulator interface.
|
|
|
|
config REGULATOR_MT6380
|
|
tristate "MediaTek MT6380 PMIC"
|
|
depends on MTK_PMIC_WRAP
|
|
help
|
|
Say y here to select this option to enable the power regulator of
|
|
MediaTek MT6380 PMIC.
|
|
This driver supports the control of different power rails of device
|
|
through regulator interface.
|
|
|
|
config REGULATOR_MT6397
|
|
tristate "MediaTek MT6397 PMIC"
|
|
depends on MFD_MT6397
|
|
help
|
|
Say y here to select this option to enable the power regulator of
|
|
MediaTek MT6397 PMIC.
|
|
This driver supports the control of different power rails of device
|
|
through regulator interface.
|
|
|
|
config REGULATOR_PALMAS
|
|
tristate "TI Palmas PMIC Regulators"
|
|
depends on MFD_PALMAS
|
|
help
|
|
If you wish to control the regulators on the Palmas series of
|
|
chips say Y here. This will enable support for all the software
|
|
controllable SMPS/LDO regulators.
|
|
|
|
The regulators available on Palmas series chips vary depending
|
|
on the muxing. This is handled automatically in the driver by
|
|
reading the mux info from OTP.
|
|
|
|
config REGULATOR_PBIAS
|
|
tristate "PBIAS OMAP regulator driver"
|
|
depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
|
|
help
|
|
Say y here to support pbias regulator for mmc1:SD card i/o
|
|
on OMAP SoCs.
|
|
This driver provides support for OMAP pbias modelled
|
|
regulators.
|
|
|
|
config REGULATOR_PCAP
|
|
tristate "Motorola PCAP2 regulator driver"
|
|
depends on EZX_PCAP
|
|
help
|
|
This driver provides support for the voltage regulators of the
|
|
PCAP2 PMIC.
|
|
|
|
config REGULATOR_PCF50633
|
|
tristate "NXP PCF50633 regulator driver"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say Y here to support the voltage regulators and converters
|
|
on PCF50633
|
|
|
|
config REGULATOR_PFUZE100
|
|
tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support the regulators found on the Freescale
|
|
PFUZE100/200/3000/3001 PMIC.
|
|
|
|
config REGULATOR_PV88060
|
|
tristate "Powerventure Semiconductor PV88060 regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support the voltage regulators and convertors
|
|
PV88060
|
|
|
|
config REGULATOR_PV88080
|
|
tristate "Powerventure Semiconductor PV88080 regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support the buck convertors on PV88080
|
|
|
|
config REGULATOR_PV88090
|
|
tristate "Powerventure Semiconductor PV88090 regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support the voltage regulators and convertors
|
|
on PV88090
|
|
|
|
config REGULATOR_PWM
|
|
tristate "PWM voltage regulator"
|
|
depends on PWM
|
|
help
|
|
This driver supports PWM controlled voltage regulators. PWM
|
|
duty cycle can increase or decrease the voltage.
|
|
|
|
config REGULATOR_QCOM_RPM
|
|
tristate "Qualcomm RPM regulator driver"
|
|
depends on MFD_QCOM_RPM
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
regulators exposed by the Resource Power Manager found in Qualcomm
|
|
8660, 8960 and 8064 based devices.
|
|
|
|
Say M here if you want to include support for the regulators on the
|
|
Qualcomm RPM as a module. The module will be named
|
|
"qcom_rpm-regulator".
|
|
|
|
config REGULATOR_QCOM_RPMH
|
|
tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
|
|
depends on QCOM_RPMH || COMPILE_TEST
|
|
help
|
|
This driver supports control of PMIC regulators via the RPMh hardware
|
|
block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
|
|
control allows for voting on regulator state between multiple
|
|
processors within the SoC.
|
|
|
|
config REGULATOR_QCOM_SMD_RPM
|
|
tristate "Qualcomm SMD based RPM regulator driver"
|
|
depends on QCOM_SMD_RPM
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
regulators exposed by the Resource Power Manager found in Qualcomm
|
|
8974 based devices.
|
|
|
|
Say M here if you want to include support for the regulators on the
|
|
Qualcomm RPM as a module. The module will be named
|
|
"qcom_smd-regulator".
|
|
|
|
config REGULATOR_QCOM_SPMI
|
|
tristate "Qualcomm SPMI regulator driver"
|
|
depends on SPMI || COMPILE_TEST
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
regulators found in Qualcomm SPMI PMICs.
|
|
|
|
Say M here if you want to include support for the regulators on the
|
|
Qualcomm SPMI PMICs as a module. The module will be named
|
|
"qcom_spmi-regulator".
|
|
|
|
config REGULATOR_RC5T583
|
|
tristate "RICOH RC5T583 Power regulators"
|
|
depends on MFD_RC5T583
|
|
help
|
|
Select this option to enable the power regulator of RICOH
|
|
PMIC RC5T583.
|
|
This driver supports the control of different power rails of device
|
|
through regulator interface. The device supports multiple DCDC/LDO
|
|
outputs which can be controlled by i2c communication.
|
|
|
|
config REGULATOR_RK808
|
|
tristate "Rockchip RK805/RK808/RK818 Power regulators"
|
|
depends on MFD_RK808
|
|
help
|
|
Select this option to enable the power regulator of ROCKCHIP
|
|
PMIC RK805,RK808 and RK818.
|
|
This driver supports the control of different power rails of device
|
|
through regulator interface. The device supports multiple DCDC/LDO
|
|
outputs which can be controlled by i2c communication.
|
|
|
|
config REGULATOR_RN5T618
|
|
tristate "Ricoh RN5T567/618 voltage regulators"
|
|
depends on MFD_RN5T618
|
|
help
|
|
Say y here to support the regulators found on Ricoh RN5T567,
|
|
RN5T618 or RC5T619 PMIC.
|
|
|
|
config REGULATOR_RT5033
|
|
tristate "Richtek RT5033 Regulators"
|
|
depends on MFD_RT5033
|
|
help
|
|
This adds support for voltage and current regulators in Richtek
|
|
RT5033 PMIC. The device supports multiple regulators like
|
|
current source, LDO and Buck.
|
|
|
|
config REGULATOR_S2MPA01
|
|
tristate "Samsung S2MPA01 voltage regulator"
|
|
depends on MFD_SEC_CORE
|
|
help
|
|
This driver controls Samsung S2MPA01 voltage output regulator
|
|
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
|
|
|
|
config REGULATOR_S2MPS11
|
|
tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
|
|
depends on MFD_SEC_CORE
|
|
help
|
|
This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
|
|
output regulator via I2C bus. The chip is comprised of high efficient
|
|
Buck converters including Dual-Phase Buck converter, Buck-Boost
|
|
converter, various LDOs.
|
|
|
|
config REGULATOR_S5M8767
|
|
tristate "Samsung S5M8767A voltage regulator"
|
|
depends on MFD_SEC_CORE
|
|
help
|
|
This driver supports a Samsung S5M8767A voltage output regulator
|
|
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
|
|
supports DVS mode with 8bits of output voltage control.
|
|
|
|
config REGULATOR_SC2731
|
|
tristate "Spreadtrum SC2731 power regulator driver"
|
|
depends on MFD_SC27XX_PMIC || COMPILE_TEST
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
SC2731 PMIC.
|
|
|
|
config REGULATOR_SKY81452
|
|
tristate "Skyworks Solutions SKY81452 voltage regulator"
|
|
depends on MFD_SKY81452
|
|
help
|
|
This driver supports Skyworks SKY81452 voltage output regulator
|
|
via I2C bus. SKY81452 has one voltage linear regulator can be
|
|
programmed from 4.5V to 20V.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sky81452-regulator.
|
|
|
|
config REGULATOR_SLG51000
|
|
tristate "Dialog Semiconductor SLG51000 regulators"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say y here to support for the Dialog Semiconductor SLG51000.
|
|
The SLG51000 is seven compact and customizable low dropout
|
|
regulators.
|
|
|
|
config REGULATOR_STM32_BOOSTER
|
|
tristate "STMicroelectronics STM32 BOOSTER"
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
help
|
|
This driver supports internal booster (3V3) embedded in some
|
|
STMicroelectronics STM32 chips. It can be used to supply ADC analog
|
|
input switches when vdda supply is below 2.7V.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called stm32-booster.
|
|
|
|
config REGULATOR_STM32_VREFBUF
|
|
tristate "STMicroelectronics STM32 VREFBUF"
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
help
|
|
This driver supports STMicroelectronics STM32 VREFBUF (voltage
|
|
reference buffer) which can be used as voltage reference for
|
|
internal ADCs, DACs and also for external components through
|
|
dedicated Vref+ pin.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called stm32-vrefbuf.
|
|
|
|
config REGULATOR_STM32_PWR
|
|
bool "STMicroelectronics STM32 PWR"
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
help
|
|
This driver supports internal regulators (1V1, 1V8, 3V3) in the
|
|
STMicroelectronics STM32 chips.
|
|
|
|
config REGULATOR_STPMIC1
|
|
tristate "STMicroelectronics STPMIC1 PMIC Regulators"
|
|
depends on MFD_STPMIC1
|
|
help
|
|
This driver supports STMicroelectronics STPMIC1 PMIC voltage
|
|
regulators and switches. The STPMIC1 regulators supply power to
|
|
an application processor as well as to external system
|
|
peripherals such as DDR, Flash memories and system devices.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called stpmic1_regulator.
|
|
|
|
config REGULATOR_TI_ABB
|
|
tristate "TI Adaptive Body Bias on-chip LDO"
|
|
depends on ARCH_OMAP
|
|
help
|
|
Select this option to support Texas Instruments' on-chip Adaptive Body
|
|
Bias (ABB) LDO regulators. It is recommended that this option be
|
|
enabled on required TI SoC. Certain Operating Performance Points
|
|
on TI SoCs may be unstable without enabling this as it provides
|
|
device specific optimized bias to allow/optimize functionality.
|
|
|
|
config REGULATOR_STW481X_VMMC
|
|
bool "ST Microelectronics STW481X VMMC regulator"
|
|
depends on MFD_STW481X || COMPILE_TEST
|
|
default y if MFD_STW481X
|
|
help
|
|
This driver supports the internal VMMC regulator in the STw481x
|
|
PMIC chips.
|
|
|
|
config REGULATOR_SY8106A
|
|
tristate "Silergy SY8106A regulator"
|
|
depends on I2C && (OF || COMPILE_TEST)
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports SY8106A single output regulator.
|
|
|
|
config REGULATOR_TPS51632
|
|
tristate "TI TPS51632 Power Regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports TPS51632 voltage regulator chip.
|
|
The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
|
|
with Serial VID control and DVFS.
|
|
The voltage output can be configure through I2C interface or PWM
|
|
interface.
|
|
|
|
config REGULATOR_TPS6105X
|
|
tristate "TI TPS6105X Power regulators"
|
|
depends on TPS6105X
|
|
default y if TPS6105X
|
|
help
|
|
This driver supports TPS61050/TPS61052 voltage regulator chips.
|
|
It is a single boost converter primarily for white LEDs and
|
|
audio amplifiers.
|
|
|
|
config REGULATOR_TPS62360
|
|
tristate "TI TPS6236x Power Regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports TPS6236x voltage regulator chip. This
|
|
regulator is meant for processor core supply. This chip is
|
|
high-frequency synchronous step down dc-dc converter optimized
|
|
for battery-powered portable applications.
|
|
|
|
config REGULATOR_TPS65023
|
|
tristate "TI TPS65023 Power regulators"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports TPS65023 voltage regulator chips. TPS65023 provides
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
|
|
|
config REGULATOR_TPS6507X
|
|
tristate "TI TPS6507X Power regulators"
|
|
depends on I2C
|
|
help
|
|
This driver supports TPS6507X voltage regulator chips. TPS6507X provides
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
|
|
|
config REGULATOR_TPS65086
|
|
tristate "TI TPS65086 Power regulators"
|
|
depends on MFD_TPS65086
|
|
help
|
|
This driver provides support for the voltage regulators on
|
|
TI TPS65086 PMICs.
|
|
|
|
config REGULATOR_TPS65090
|
|
tristate "TI TPS65090 Power regulator"
|
|
depends on MFD_TPS65090
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
TI TPS65090 PMIC.
|
|
|
|
config REGULATOR_TPS65132
|
|
tristate "TI TPS65132 Dual Output Power regulators"
|
|
depends on I2C && GPIOLIB
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports TPS65132 single inductor - dual output
|
|
power supply specifically designed for display panels.
|
|
|
|
config REGULATOR_TPS65217
|
|
tristate "TI TPS65217 Power regulators"
|
|
depends on MFD_TPS65217
|
|
help
|
|
This driver supports TPS65217 voltage regulator chips. TPS65217
|
|
provides three step-down converters and four general-purpose LDO
|
|
voltage regulators. It supports software based voltage control
|
|
for different voltage domains
|
|
|
|
config REGULATOR_TPS65218
|
|
tristate "TI TPS65218 Power regulators"
|
|
depends on MFD_TPS65218 && OF
|
|
help
|
|
This driver supports TPS65218 voltage regulator chips. TPS65218
|
|
provides six step-down converters and one general-purpose LDO
|
|
voltage regulators. It supports software based voltage control
|
|
for different voltage domains
|
|
|
|
config REGULATOR_TPS6524X
|
|
tristate "TI TPS6524X Power regulators"
|
|
depends on SPI
|
|
help
|
|
This driver supports TPS6524X voltage regulator chips. TPS6524X
|
|
provides three step-down converters and two general-purpose LDO
|
|
voltage regulators. This device is interfaced using a customized
|
|
serial interface currently supported on the sequencer serial
|
|
port controller.
|
|
|
|
config REGULATOR_TPS6586X
|
|
tristate "TI TPS6586X Power regulators"
|
|
depends on MFD_TPS6586X
|
|
help
|
|
This driver supports TPS6586X voltage regulator chips.
|
|
|
|
config REGULATOR_TPS65910
|
|
tristate "TI TPS65910/TPS65911 Power Regulators"
|
|
depends on MFD_TPS65910
|
|
help
|
|
This driver supports TPS65910/TPS65911 voltage regulator chips.
|
|
|
|
config REGULATOR_TPS65912
|
|
tristate "TI TPS65912 Power regulator"
|
|
depends on MFD_TPS65912
|
|
help
|
|
This driver supports TPS65912 voltage regulator chip.
|
|
|
|
config REGULATOR_TPS80031
|
|
tristate "TI TPS80031/TPS80032 power regulator driver"
|
|
depends on MFD_TPS80031
|
|
help
|
|
TPS80031/ TPS80032 Fully Integrated Power Management with Power
|
|
Path and Battery Charger. It has 5 configurable step-down
|
|
converters, 11 general purpose LDOs, VBUS generator and digital
|
|
output to control regulators.
|
|
|
|
config REGULATOR_TWL4030
|
|
tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
|
|
depends on TWL4030_CORE
|
|
help
|
|
This driver supports the voltage regulators provided by
|
|
this family of companion chips.
|
|
|
|
config REGULATOR_UNIPHIER
|
|
tristate "UniPhier regulator driver"
|
|
depends on ARCH_UNIPHIER || COMPILE_TEST
|
|
depends on OF
|
|
select REGMAP_MMIO
|
|
default ARCH_UNIPHIER
|
|
help
|
|
Support for regulators implemented on Socionext UniPhier SoCs.
|
|
|
|
config REGULATOR_VCTRL
|
|
tristate "Voltage controlled regulators"
|
|
depends on OF
|
|
help
|
|
This driver provides support for voltage regulators whose output
|
|
voltage is controlled by the voltage of another regulator.
|
|
|
|
config REGULATOR_VEXPRESS
|
|
tristate "Versatile Express regulators"
|
|
depends on VEXPRESS_CONFIG
|
|
help
|
|
This driver provides support for voltage regulators available
|
|
on the ARM Ltd's Versatile Express platform.
|
|
|
|
config REGULATOR_WM831X
|
|
tristate "Wolfson Microelectronics WM831x PMIC regulators"
|
|
depends on MFD_WM831X
|
|
help
|
|
Support the voltage and current regulators of the WM831x series
|
|
of PMIC devices.
|
|
|
|
config REGULATOR_WM8350
|
|
tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
|
|
depends on MFD_WM8350
|
|
help
|
|
This driver provides support for the voltage and current regulators
|
|
of the WM8350 AudioPlus PMIC.
|
|
|
|
config REGULATOR_WM8400
|
|
tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
|
|
depends on MFD_WM8400
|
|
help
|
|
This driver provides support for the voltage regulators of the
|
|
WM8400 AudioPlus PMIC.
|
|
|
|
config REGULATOR_WM8994
|
|
tristate "Wolfson Microelectronics WM8994 CODEC"
|
|
depends on MFD_WM8994
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
WM8994 CODEC.
|
|
|
|
endif
|
|
|