mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
a80ea4cb94
- clarify license version (it should be GPL 2.0) - use SPDX header Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
381 lines
10 KiB
C
381 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
* Palmchip BK3710 PATA controller driver
|
|
*
|
|
* Copyright (c) 2017 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Based on palm_bk3710.c:
|
|
*
|
|
* Copyright (C) 2006 Texas Instruments.
|
|
* Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
|
|
*/
|
|
|
|
#include <linux/ata.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
|
|
#define DRV_NAME "pata_bk3710"
|
|
|
|
#define BK3710_TF_OFFSET 0x1F0
|
|
#define BK3710_CTL_OFFSET 0x3F6
|
|
|
|
#define BK3710_BMISP 0x02
|
|
#define BK3710_IDETIMP 0x40
|
|
#define BK3710_UDMACTL 0x48
|
|
#define BK3710_MISCCTL 0x50
|
|
#define BK3710_REGSTB 0x54
|
|
#define BK3710_REGRCVR 0x58
|
|
#define BK3710_DATSTB 0x5C
|
|
#define BK3710_DATRCVR 0x60
|
|
#define BK3710_DMASTB 0x64
|
|
#define BK3710_DMARCVR 0x68
|
|
#define BK3710_UDMASTB 0x6C
|
|
#define BK3710_UDMATRP 0x70
|
|
#define BK3710_UDMAENV 0x74
|
|
#define BK3710_IORDYTMP 0x78
|
|
|
|
static struct scsi_host_template pata_bk3710_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static unsigned int ideclk_period; /* in nanoseconds */
|
|
|
|
struct pata_bk3710_udmatiming {
|
|
unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
|
|
unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
|
|
/* tENV is always a minimum of 20 nsec */
|
|
};
|
|
|
|
static const struct pata_bk3710_udmatiming pata_bk3710_udmatimings[6] = {
|
|
{ 160, 240 / 2 }, /* UDMA Mode 0 */
|
|
{ 125, 160 / 2 }, /* UDMA Mode 1 */
|
|
{ 100, 120 / 2 }, /* UDMA Mode 2 */
|
|
{ 100, 90 / 2 }, /* UDMA Mode 3 */
|
|
{ 100, 60 / 2 }, /* UDMA Mode 4 */
|
|
{ 85, 40 / 2 }, /* UDMA Mode 5 */
|
|
};
|
|
|
|
static void pata_bk3710_setudmamode(void __iomem *base, unsigned int dev,
|
|
unsigned int mode)
|
|
{
|
|
u32 val32;
|
|
u16 val16;
|
|
u8 tenv, trp, t0;
|
|
|
|
/* DMA Data Setup */
|
|
t0 = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].cycletime,
|
|
ideclk_period) - 1;
|
|
tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
|
|
trp = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].rptime,
|
|
ideclk_period) - 1;
|
|
|
|
/* udmastb Ultra DMA Access Strobe Width */
|
|
val32 = ioread32(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= t0 << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_UDMASTB);
|
|
|
|
/* udmatrp Ultra DMA Ready to Pause Time */
|
|
val32 = ioread32(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= trp << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_UDMATRP);
|
|
|
|
/* udmaenv Ultra DMA envelop Time */
|
|
val32 = ioread32(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= tenv << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_UDMAENV);
|
|
|
|
/* Enable UDMA for Device */
|
|
val16 = ioread16(base + BK3710_UDMACTL) | (1 << dev);
|
|
iowrite16(val16, base + BK3710_UDMACTL);
|
|
}
|
|
|
|
static void pata_bk3710_setmwdmamode(void __iomem *base, unsigned int dev,
|
|
unsigned short min_cycle,
|
|
unsigned int mode)
|
|
{
|
|
const struct ata_timing *t;
|
|
int cycletime;
|
|
u32 val32;
|
|
u16 val16;
|
|
u8 td, tkw, t0;
|
|
|
|
t = ata_timing_find_mode(mode);
|
|
cycletime = max_t(int, t->cycle, min_cycle);
|
|
|
|
/* DMA Data Setup */
|
|
t0 = DIV_ROUND_UP(cycletime, ideclk_period);
|
|
td = DIV_ROUND_UP(t->active, ideclk_period);
|
|
tkw = t0 - td - 1;
|
|
td--;
|
|
|
|
val32 = ioread32(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= td << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_DMASTB);
|
|
|
|
val32 = ioread32(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= tkw << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_DMARCVR);
|
|
|
|
/* Disable UDMA for Device */
|
|
val16 = ioread16(base + BK3710_UDMACTL) & ~(1 << dev);
|
|
iowrite16(val16, base + BK3710_UDMACTL);
|
|
}
|
|
|
|
static void pata_bk3710_set_dmamode(struct ata_port *ap,
|
|
struct ata_device *adev)
|
|
{
|
|
void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
|
|
int is_slave = adev->devno;
|
|
const u8 xferspeed = adev->dma_mode;
|
|
|
|
if (xferspeed >= XFER_UDMA_0)
|
|
pata_bk3710_setudmamode(base, is_slave,
|
|
xferspeed - XFER_UDMA_0);
|
|
else
|
|
pata_bk3710_setmwdmamode(base, is_slave,
|
|
adev->id[ATA_ID_EIDE_DMA_MIN],
|
|
xferspeed);
|
|
}
|
|
|
|
static void pata_bk3710_setpiomode(void __iomem *base, struct ata_device *pair,
|
|
unsigned int dev, unsigned int cycletime,
|
|
unsigned int mode)
|
|
{
|
|
const struct ata_timing *t;
|
|
u32 val32;
|
|
u8 t2, t2i, t0;
|
|
|
|
t = ata_timing_find_mode(XFER_PIO_0 + mode);
|
|
|
|
/* PIO Data Setup */
|
|
t0 = DIV_ROUND_UP(cycletime, ideclk_period);
|
|
t2 = DIV_ROUND_UP(t->active, ideclk_period);
|
|
|
|
t2i = t0 - t2 - 1;
|
|
t2--;
|
|
|
|
val32 = ioread32(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= t2 << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_DATSTB);
|
|
|
|
val32 = ioread32(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= t2i << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_DATRCVR);
|
|
|
|
/* FIXME: this is broken also in the old driver */
|
|
if (pair) {
|
|
u8 mode2 = pair->pio_mode - XFER_PIO_0;
|
|
|
|
if (mode2 < mode)
|
|
mode = mode2;
|
|
}
|
|
|
|
/* TASKFILE Setup */
|
|
t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
|
|
t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
|
|
|
|
t2i = t0 - t2 - 1;
|
|
t2--;
|
|
|
|
val32 = ioread32(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= t2 << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_REGSTB);
|
|
|
|
val32 = ioread32(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
|
|
val32 |= t2i << (dev ? 8 : 0);
|
|
iowrite32(val32, base + BK3710_REGRCVR);
|
|
}
|
|
|
|
static void pata_bk3710_set_piomode(struct ata_port *ap,
|
|
struct ata_device *adev)
|
|
{
|
|
void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
const struct ata_timing *t = ata_timing_find_mode(adev->pio_mode);
|
|
const u16 *id = adev->id;
|
|
unsigned int cycle_time = 0;
|
|
int is_slave = adev->devno;
|
|
const u8 pio = adev->pio_mode - XFER_PIO_0;
|
|
|
|
if (id[ATA_ID_FIELD_VALID] & 2) {
|
|
if (ata_id_has_iordy(id))
|
|
cycle_time = id[ATA_ID_EIDE_PIO_IORDY];
|
|
else
|
|
cycle_time = id[ATA_ID_EIDE_PIO];
|
|
|
|
/* conservative "downgrade" for all pre-ATA2 drives */
|
|
if (pio < 3 && cycle_time < t->cycle)
|
|
cycle_time = 0; /* use standard timing */
|
|
}
|
|
|
|
if (!cycle_time)
|
|
cycle_time = t->cycle;
|
|
|
|
pata_bk3710_setpiomode(base, pair, is_slave, cycle_time, pio);
|
|
}
|
|
|
|
static void pata_bk3710_chipinit(void __iomem *base)
|
|
{
|
|
/*
|
|
* REVISIT: the ATA reset signal needs to be managed through a
|
|
* GPIO, which means it should come from platform_data. Until
|
|
* we get and use such information, we have to trust that things
|
|
* have been reset before we get here.
|
|
*/
|
|
|
|
/*
|
|
* Program the IDETIMP Register Value based on the following assumptions
|
|
*
|
|
* (ATA_IDETIMP_IDEEN , ENABLE ) |
|
|
* (ATA_IDETIMP_PREPOST1 , DISABLE) |
|
|
* (ATA_IDETIMP_PREPOST0 , DISABLE) |
|
|
*
|
|
* DM6446 silicon rev 2.1 and earlier have no observed net benefit
|
|
* from enabling prefetch/postwrite.
|
|
*/
|
|
iowrite16(BIT(15), base + BK3710_IDETIMP);
|
|
|
|
/*
|
|
* UDMACTL Ultra-ATA DMA Control
|
|
* (ATA_UDMACTL_UDMAP1 , 0 ) |
|
|
* (ATA_UDMACTL_UDMAP0 , 0 )
|
|
*
|
|
*/
|
|
iowrite16(0, base + BK3710_UDMACTL);
|
|
|
|
/*
|
|
* MISCCTL Miscellaneous Conrol Register
|
|
* (ATA_MISCCTL_HWNHLD1P , 1 cycle)
|
|
* (ATA_MISCCTL_HWNHLD0P , 1 cycle)
|
|
* (ATA_MISCCTL_TIMORIDE , 1)
|
|
*/
|
|
iowrite32(0x001, base + BK3710_MISCCTL);
|
|
|
|
/*
|
|
* IORDYTMP IORDY Timer for Primary Register
|
|
* (ATA_IORDYTMP_IORDYTMP , DISABLE)
|
|
*/
|
|
iowrite32(0, base + BK3710_IORDYTMP);
|
|
|
|
/*
|
|
* Configure BMISP Register
|
|
* (ATA_BMISP_DMAEN1 , DISABLE ) |
|
|
* (ATA_BMISP_DMAEN0 , DISABLE ) |
|
|
* (ATA_BMISP_IORDYINT , CLEAR) |
|
|
* (ATA_BMISP_INTRSTAT , CLEAR) |
|
|
* (ATA_BMISP_DMAERROR , CLEAR)
|
|
*/
|
|
iowrite16(0xE, base + BK3710_BMISP);
|
|
|
|
pata_bk3710_setpiomode(base, NULL, 0, 600, 0);
|
|
pata_bk3710_setpiomode(base, NULL, 1, 600, 0);
|
|
}
|
|
|
|
static struct ata_port_operations pata_bk3710_ports_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.cable_detect = ata_cable_80wire,
|
|
|
|
.set_piomode = pata_bk3710_set_piomode,
|
|
.set_dmamode = pata_bk3710_set_dmamode,
|
|
};
|
|
|
|
static int __init pata_bk3710_probe(struct platform_device *pdev)
|
|
{
|
|
struct clk *clk;
|
|
struct resource *mem;
|
|
struct ata_host *host;
|
|
struct ata_port *ap;
|
|
void __iomem *base;
|
|
unsigned long rate;
|
|
int irq;
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return -ENODEV;
|
|
|
|
clk_enable(clk);
|
|
rate = clk_get_rate(clk);
|
|
if (!rate)
|
|
return -EINVAL;
|
|
|
|
/* NOTE: round *down* to meet minimum timings; we count in clocks */
|
|
ideclk_period = 1000000000UL / rate;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
pr_err(DRV_NAME ": failed to get IRQ resource\n");
|
|
return irq;
|
|
}
|
|
|
|
base = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
/* configure the Palmchip controller */
|
|
pata_bk3710_chipinit(base);
|
|
|
|
/* allocate host */
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
ap = host->ports[0];
|
|
|
|
ap->ops = &pata_bk3710_ports_ops;
|
|
ap->pio_mask = ATA_PIO4;
|
|
ap->mwdma_mask = ATA_MWDMA2;
|
|
ap->udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5;
|
|
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
|
|
|
ap->ioaddr.data_addr = base + BK3710_TF_OFFSET;
|
|
ap->ioaddr.error_addr = base + BK3710_TF_OFFSET + 1;
|
|
ap->ioaddr.feature_addr = base + BK3710_TF_OFFSET + 1;
|
|
ap->ioaddr.nsect_addr = base + BK3710_TF_OFFSET + 2;
|
|
ap->ioaddr.lbal_addr = base + BK3710_TF_OFFSET + 3;
|
|
ap->ioaddr.lbam_addr = base + BK3710_TF_OFFSET + 4;
|
|
ap->ioaddr.lbah_addr = base + BK3710_TF_OFFSET + 5;
|
|
ap->ioaddr.device_addr = base + BK3710_TF_OFFSET + 6;
|
|
ap->ioaddr.status_addr = base + BK3710_TF_OFFSET + 7;
|
|
ap->ioaddr.command_addr = base + BK3710_TF_OFFSET + 7;
|
|
|
|
ap->ioaddr.altstatus_addr = base + BK3710_CTL_OFFSET;
|
|
ap->ioaddr.ctl_addr = base + BK3710_CTL_OFFSET;
|
|
|
|
ap->ioaddr.bmdma_addr = base;
|
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
|
|
(unsigned long)base + BK3710_TF_OFFSET,
|
|
(unsigned long)base + BK3710_CTL_OFFSET);
|
|
|
|
/* activate */
|
|
return ata_host_activate(host, irq, ata_sff_interrupt, 0,
|
|
&pata_bk3710_sht);
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:palm_bk3710");
|
|
|
|
static struct platform_driver pata_bk3710_driver = {
|
|
.driver = {
|
|
.name = "palm_bk3710",
|
|
},
|
|
};
|
|
|
|
static int __init pata_bk3710_init(void)
|
|
{
|
|
return platform_driver_probe(&pata_bk3710_driver, pata_bk3710_probe);
|
|
}
|
|
|
|
module_init(pata_bk3710_init);
|
|
MODULE_LICENSE("GPL v2");
|