mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
636f6e2af4
ACS-3 introduced the ATA Identify Device Data log as mandatory. A warning message currently signals to the user if a device does not report supporting this log page in the log directory page, regardless of the ATA version of the device. Furthermore, this warning will appear for all attempts at accessing this missing log page during device revalidation. Since it is useless to constantly access the log directory and warn about this lack of support once we have discovered that the device does not support this log page, introduce the horkage flag ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for the Identify Device Data log page. Set this flag when ata_log_supported() returns false in ata_identify_page_supported(). The warning is printed only if the device ATA level is 10 or above (ACS-3 or above), and only once on device scan. With this flag set, the log directory page is not accessed again to test for Identify Device Data log page support. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
6615 lines
167 KiB
C
6615 lines
167 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* libata-core.c - helper library for ATA
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/driver-api/libata.rst
|
|
*
|
|
* Hardware documentation available from http://www.t13.org/ and
|
|
* http://www.sata-io.org/
|
|
*
|
|
* Standards documents from:
|
|
* http://www.t13.org (ATA standards, PCI DMA IDE spec)
|
|
* http://www.t10.org (SCSI MMC - for ATAPI MMC)
|
|
* http://www.sata-io.org (SATA)
|
|
* http://www.compactflash.org (CF)
|
|
* http://www.qic.org (QIC157 - Tape and DSC)
|
|
* http://www.ce-ata.org (CE-ATA: not supported)
|
|
*
|
|
* libata is essentially a library of internal helper functions for
|
|
* low-level ATA host controller drivers. As such, the API/ABI is
|
|
* likely to change as new drivers are added and updated.
|
|
* Do not depend on ABI/API stability.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/time.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/io.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/glob.h>
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/cdrom.h>
|
|
#include <linux/ratelimit.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/platform_device.h>
|
|
#include <asm/setup.h>
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include <trace/events/libata.h>
|
|
|
|
#include "libata.h"
|
|
#include "libata-transport.h"
|
|
|
|
const struct ata_port_operations ata_base_port_ops = {
|
|
.prereset = ata_std_prereset,
|
|
.postreset = ata_std_postreset,
|
|
.error_handler = ata_std_error_handler,
|
|
.sched_eh = ata_std_sched_eh,
|
|
.end_eh = ata_std_end_eh,
|
|
};
|
|
|
|
const struct ata_port_operations sata_port_ops = {
|
|
.inherits = &ata_base_port_ops,
|
|
|
|
.qc_defer = ata_std_qc_defer,
|
|
.hardreset = sata_std_hardreset,
|
|
};
|
|
EXPORT_SYMBOL_GPL(sata_port_ops);
|
|
|
|
static unsigned int ata_dev_init_params(struct ata_device *dev,
|
|
u16 heads, u16 sectors);
|
|
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
|
|
static void ata_dev_xfermask(struct ata_device *dev);
|
|
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
|
|
|
|
atomic_t ata_print_id = ATOMIC_INIT(0);
|
|
|
|
#ifdef CONFIG_ATA_FORCE
|
|
struct ata_force_param {
|
|
const char *name;
|
|
u8 cbl;
|
|
u8 spd_limit;
|
|
unsigned long xfer_mask;
|
|
unsigned int horkage_on;
|
|
unsigned int horkage_off;
|
|
u16 lflags;
|
|
};
|
|
|
|
struct ata_force_ent {
|
|
int port;
|
|
int device;
|
|
struct ata_force_param param;
|
|
};
|
|
|
|
static struct ata_force_ent *ata_force_tbl;
|
|
static int ata_force_tbl_size;
|
|
|
|
static char ata_force_param_buf[COMMAND_LINE_SIZE] __initdata;
|
|
/* param_buf is thrown away after initialization, disallow read */
|
|
module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
|
|
MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/admin-guide/kernel-parameters.rst for details)");
|
|
#endif
|
|
|
|
static int atapi_enabled = 1;
|
|
module_param(atapi_enabled, int, 0444);
|
|
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
|
|
|
|
static int atapi_dmadir = 0;
|
|
module_param(atapi_dmadir, int, 0444);
|
|
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
|
|
|
|
int atapi_passthru16 = 1;
|
|
module_param(atapi_passthru16, int, 0444);
|
|
MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
|
|
|
|
int libata_fua = 0;
|
|
module_param_named(fua, libata_fua, int, 0444);
|
|
MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
|
|
|
|
static int ata_ignore_hpa;
|
|
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
|
|
MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
|
|
|
|
static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA;
|
|
module_param_named(dma, libata_dma_mask, int, 0444);
|
|
MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
|
|
|
|
static int ata_probe_timeout;
|
|
module_param(ata_probe_timeout, int, 0444);
|
|
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
|
|
|
|
int libata_noacpi = 0;
|
|
module_param_named(noacpi, libata_noacpi, int, 0444);
|
|
MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
|
|
|
|
int libata_allow_tpm = 0;
|
|
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
|
|
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
|
|
|
|
static int atapi_an;
|
|
module_param(atapi_an, int, 0444);
|
|
MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)");
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("Library module for ATA devices");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static inline bool ata_dev_print_info(struct ata_device *dev)
|
|
{
|
|
struct ata_eh_context *ehc = &dev->link->eh_context;
|
|
|
|
return ehc->i.flags & ATA_EHI_PRINTINFO;
|
|
}
|
|
|
|
static bool ata_sstatus_online(u32 sstatus)
|
|
{
|
|
return (sstatus & 0xf) == 0x3;
|
|
}
|
|
|
|
/**
|
|
* ata_link_next - link iteration helper
|
|
* @link: the previous link, NULL to start
|
|
* @ap: ATA port containing links to iterate
|
|
* @mode: iteration mode, one of ATA_LITER_*
|
|
*
|
|
* LOCKING:
|
|
* Host lock or EH context.
|
|
*
|
|
* RETURNS:
|
|
* Pointer to the next link.
|
|
*/
|
|
struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
|
|
enum ata_link_iter_mode mode)
|
|
{
|
|
BUG_ON(mode != ATA_LITER_EDGE &&
|
|
mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);
|
|
|
|
/* NULL link indicates start of iteration */
|
|
if (!link)
|
|
switch (mode) {
|
|
case ATA_LITER_EDGE:
|
|
case ATA_LITER_PMP_FIRST:
|
|
if (sata_pmp_attached(ap))
|
|
return ap->pmp_link;
|
|
fallthrough;
|
|
case ATA_LITER_HOST_FIRST:
|
|
return &ap->link;
|
|
}
|
|
|
|
/* we just iterated over the host link, what's next? */
|
|
if (link == &ap->link)
|
|
switch (mode) {
|
|
case ATA_LITER_HOST_FIRST:
|
|
if (sata_pmp_attached(ap))
|
|
return ap->pmp_link;
|
|
fallthrough;
|
|
case ATA_LITER_PMP_FIRST:
|
|
if (unlikely(ap->slave_link))
|
|
return ap->slave_link;
|
|
fallthrough;
|
|
case ATA_LITER_EDGE:
|
|
return NULL;
|
|
}
|
|
|
|
/* slave_link excludes PMP */
|
|
if (unlikely(link == ap->slave_link))
|
|
return NULL;
|
|
|
|
/* we were over a PMP link */
|
|
if (++link < ap->pmp_link + ap->nr_pmp_links)
|
|
return link;
|
|
|
|
if (mode == ATA_LITER_PMP_FIRST)
|
|
return &ap->link;
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_link_next);
|
|
|
|
/**
|
|
* ata_dev_next - device iteration helper
|
|
* @dev: the previous device, NULL to start
|
|
* @link: ATA link containing devices to iterate
|
|
* @mode: iteration mode, one of ATA_DITER_*
|
|
*
|
|
* LOCKING:
|
|
* Host lock or EH context.
|
|
*
|
|
* RETURNS:
|
|
* Pointer to the next device.
|
|
*/
|
|
struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
|
|
enum ata_dev_iter_mode mode)
|
|
{
|
|
BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
|
|
mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);
|
|
|
|
/* NULL dev indicates start of iteration */
|
|
if (!dev)
|
|
switch (mode) {
|
|
case ATA_DITER_ENABLED:
|
|
case ATA_DITER_ALL:
|
|
dev = link->device;
|
|
goto check;
|
|
case ATA_DITER_ENABLED_REVERSE:
|
|
case ATA_DITER_ALL_REVERSE:
|
|
dev = link->device + ata_link_max_devices(link) - 1;
|
|
goto check;
|
|
}
|
|
|
|
next:
|
|
/* move to the next one */
|
|
switch (mode) {
|
|
case ATA_DITER_ENABLED:
|
|
case ATA_DITER_ALL:
|
|
if (++dev < link->device + ata_link_max_devices(link))
|
|
goto check;
|
|
return NULL;
|
|
case ATA_DITER_ENABLED_REVERSE:
|
|
case ATA_DITER_ALL_REVERSE:
|
|
if (--dev >= link->device)
|
|
goto check;
|
|
return NULL;
|
|
}
|
|
|
|
check:
|
|
if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
|
|
!ata_dev_enabled(dev))
|
|
goto next;
|
|
return dev;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_dev_next);
|
|
|
|
/**
|
|
* ata_dev_phys_link - find physical link for a device
|
|
* @dev: ATA device to look up physical link for
|
|
*
|
|
* Look up physical link which @dev is attached to. Note that
|
|
* this is different from @dev->link only when @dev is on slave
|
|
* link. For all other cases, it's the same as @dev->link.
|
|
*
|
|
* LOCKING:
|
|
* Don't care.
|
|
*
|
|
* RETURNS:
|
|
* Pointer to the found physical link.
|
|
*/
|
|
struct ata_link *ata_dev_phys_link(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
|
|
if (!ap->slave_link)
|
|
return dev->link;
|
|
if (!dev->devno)
|
|
return &ap->link;
|
|
return ap->slave_link;
|
|
}
|
|
|
|
#ifdef CONFIG_ATA_FORCE
|
|
/**
|
|
* ata_force_cbl - force cable type according to libata.force
|
|
* @ap: ATA port of interest
|
|
*
|
|
* Force cable type according to libata.force and whine about it.
|
|
* The last entry which has matching port number is used, so it
|
|
* can be specified as part of device force parameters. For
|
|
* example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the
|
|
* same effect.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*/
|
|
void ata_force_cbl(struct ata_port *ap)
|
|
{
|
|
int i;
|
|
|
|
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
|
|
const struct ata_force_ent *fe = &ata_force_tbl[i];
|
|
|
|
if (fe->port != -1 && fe->port != ap->print_id)
|
|
continue;
|
|
|
|
if (fe->param.cbl == ATA_CBL_NONE)
|
|
continue;
|
|
|
|
ap->cbl = fe->param.cbl;
|
|
ata_port_notice(ap, "FORCE: cable set to %s\n", fe->param.name);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_force_link_limits - force link limits according to libata.force
|
|
* @link: ATA link of interest
|
|
*
|
|
* Force link flags and SATA spd limit according to libata.force
|
|
* and whine about it. When only the port part is specified
|
|
* (e.g. 1:), the limit applies to all links connected to both
|
|
* the host link and all fan-out ports connected via PMP. If the
|
|
* device part is specified as 0 (e.g. 1.00:), it specifies the
|
|
* first fan-out link not the host link. Device number 15 always
|
|
* points to the host link whether PMP is attached or not. If the
|
|
* controller has slave link, device number 16 points to it.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*/
|
|
static void ata_force_link_limits(struct ata_link *link)
|
|
{
|
|
bool did_spd = false;
|
|
int linkno = link->pmp;
|
|
int i;
|
|
|
|
if (ata_is_host_link(link))
|
|
linkno += 15;
|
|
|
|
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
|
|
const struct ata_force_ent *fe = &ata_force_tbl[i];
|
|
|
|
if (fe->port != -1 && fe->port != link->ap->print_id)
|
|
continue;
|
|
|
|
if (fe->device != -1 && fe->device != linkno)
|
|
continue;
|
|
|
|
/* only honor the first spd limit */
|
|
if (!did_spd && fe->param.spd_limit) {
|
|
link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
|
|
ata_link_notice(link, "FORCE: PHY spd limit set to %s\n",
|
|
fe->param.name);
|
|
did_spd = true;
|
|
}
|
|
|
|
/* let lflags stack */
|
|
if (fe->param.lflags) {
|
|
link->flags |= fe->param.lflags;
|
|
ata_link_notice(link,
|
|
"FORCE: link flag 0x%x forced -> 0x%x\n",
|
|
fe->param.lflags, link->flags);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_force_xfermask - force xfermask according to libata.force
|
|
* @dev: ATA device of interest
|
|
*
|
|
* Force xfer_mask according to libata.force and whine about it.
|
|
* For consistency with link selection, device number 15 selects
|
|
* the first device connected to the host link.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*/
|
|
static void ata_force_xfermask(struct ata_device *dev)
|
|
{
|
|
int devno = dev->link->pmp + dev->devno;
|
|
int alt_devno = devno;
|
|
int i;
|
|
|
|
/* allow n.15/16 for devices attached to host port */
|
|
if (ata_is_host_link(dev->link))
|
|
alt_devno += 15;
|
|
|
|
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
|
|
const struct ata_force_ent *fe = &ata_force_tbl[i];
|
|
unsigned long pio_mask, mwdma_mask, udma_mask;
|
|
|
|
if (fe->port != -1 && fe->port != dev->link->ap->print_id)
|
|
continue;
|
|
|
|
if (fe->device != -1 && fe->device != devno &&
|
|
fe->device != alt_devno)
|
|
continue;
|
|
|
|
if (!fe->param.xfer_mask)
|
|
continue;
|
|
|
|
ata_unpack_xfermask(fe->param.xfer_mask,
|
|
&pio_mask, &mwdma_mask, &udma_mask);
|
|
if (udma_mask)
|
|
dev->udma_mask = udma_mask;
|
|
else if (mwdma_mask) {
|
|
dev->udma_mask = 0;
|
|
dev->mwdma_mask = mwdma_mask;
|
|
} else {
|
|
dev->udma_mask = 0;
|
|
dev->mwdma_mask = 0;
|
|
dev->pio_mask = pio_mask;
|
|
}
|
|
|
|
ata_dev_notice(dev, "FORCE: xfer_mask set to %s\n",
|
|
fe->param.name);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_force_horkage - force horkage according to libata.force
|
|
* @dev: ATA device of interest
|
|
*
|
|
* Force horkage according to libata.force and whine about it.
|
|
* For consistency with link selection, device number 15 selects
|
|
* the first device connected to the host link.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*/
|
|
static void ata_force_horkage(struct ata_device *dev)
|
|
{
|
|
int devno = dev->link->pmp + dev->devno;
|
|
int alt_devno = devno;
|
|
int i;
|
|
|
|
/* allow n.15/16 for devices attached to host port */
|
|
if (ata_is_host_link(dev->link))
|
|
alt_devno += 15;
|
|
|
|
for (i = 0; i < ata_force_tbl_size; i++) {
|
|
const struct ata_force_ent *fe = &ata_force_tbl[i];
|
|
|
|
if (fe->port != -1 && fe->port != dev->link->ap->print_id)
|
|
continue;
|
|
|
|
if (fe->device != -1 && fe->device != devno &&
|
|
fe->device != alt_devno)
|
|
continue;
|
|
|
|
if (!(~dev->horkage & fe->param.horkage_on) &&
|
|
!(dev->horkage & fe->param.horkage_off))
|
|
continue;
|
|
|
|
dev->horkage |= fe->param.horkage_on;
|
|
dev->horkage &= ~fe->param.horkage_off;
|
|
|
|
ata_dev_notice(dev, "FORCE: horkage modified (%s)\n",
|
|
fe->param.name);
|
|
}
|
|
}
|
|
#else
|
|
static inline void ata_force_link_limits(struct ata_link *link) { }
|
|
static inline void ata_force_xfermask(struct ata_device *dev) { }
|
|
static inline void ata_force_horkage(struct ata_device *dev) { }
|
|
#endif
|
|
|
|
/**
|
|
* atapi_cmd_type - Determine ATAPI command type from SCSI opcode
|
|
* @opcode: SCSI opcode
|
|
*
|
|
* Determine ATAPI command type from @opcode.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
|
|
*/
|
|
int atapi_cmd_type(u8 opcode)
|
|
{
|
|
switch (opcode) {
|
|
case GPCMD_READ_10:
|
|
case GPCMD_READ_12:
|
|
return ATAPI_READ;
|
|
|
|
case GPCMD_WRITE_10:
|
|
case GPCMD_WRITE_12:
|
|
case GPCMD_WRITE_AND_VERIFY_10:
|
|
return ATAPI_WRITE;
|
|
|
|
case GPCMD_READ_CD:
|
|
case GPCMD_READ_CD_MSF:
|
|
return ATAPI_READ_CD;
|
|
|
|
case ATA_16:
|
|
case ATA_12:
|
|
if (atapi_passthru16)
|
|
return ATAPI_PASS_THRU;
|
|
fallthrough;
|
|
default:
|
|
return ATAPI_MISC;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(atapi_cmd_type);
|
|
|
|
static const u8 ata_rw_cmds[] = {
|
|
/* pio multi */
|
|
ATA_CMD_READ_MULTI,
|
|
ATA_CMD_WRITE_MULTI,
|
|
ATA_CMD_READ_MULTI_EXT,
|
|
ATA_CMD_WRITE_MULTI_EXT,
|
|
0,
|
|
0,
|
|
0,
|
|
ATA_CMD_WRITE_MULTI_FUA_EXT,
|
|
/* pio */
|
|
ATA_CMD_PIO_READ,
|
|
ATA_CMD_PIO_WRITE,
|
|
ATA_CMD_PIO_READ_EXT,
|
|
ATA_CMD_PIO_WRITE_EXT,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
/* dma */
|
|
ATA_CMD_READ,
|
|
ATA_CMD_WRITE,
|
|
ATA_CMD_READ_EXT,
|
|
ATA_CMD_WRITE_EXT,
|
|
0,
|
|
0,
|
|
0,
|
|
ATA_CMD_WRITE_FUA_EXT
|
|
};
|
|
|
|
/**
|
|
* ata_rwcmd_protocol - set taskfile r/w commands and protocol
|
|
* @tf: command to examine and configure
|
|
* @dev: device tf belongs to
|
|
*
|
|
* Examine the device configuration and tf->flags to calculate
|
|
* the proper read/write commands and protocol to use.
|
|
*
|
|
* LOCKING:
|
|
* caller.
|
|
*/
|
|
static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
|
|
{
|
|
u8 cmd;
|
|
|
|
int index, fua, lba48, write;
|
|
|
|
fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
|
|
lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
|
|
write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
|
|
|
|
if (dev->flags & ATA_DFLAG_PIO) {
|
|
tf->protocol = ATA_PROT_PIO;
|
|
index = dev->multi_count ? 0 : 8;
|
|
} else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) {
|
|
/* Unable to use DMA due to host limitation */
|
|
tf->protocol = ATA_PROT_PIO;
|
|
index = dev->multi_count ? 0 : 8;
|
|
} else {
|
|
tf->protocol = ATA_PROT_DMA;
|
|
index = 16;
|
|
}
|
|
|
|
cmd = ata_rw_cmds[index + fua + lba48 + write];
|
|
if (cmd) {
|
|
tf->command = cmd;
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* ata_tf_read_block - Read block address from ATA taskfile
|
|
* @tf: ATA taskfile of interest
|
|
* @dev: ATA device @tf belongs to
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* Read block address from @tf. This function can handle all
|
|
* three address formats - LBA, LBA48 and CHS. tf->protocol and
|
|
* flags select the address format to use.
|
|
*
|
|
* RETURNS:
|
|
* Block address read from @tf.
|
|
*/
|
|
u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
|
|
{
|
|
u64 block = 0;
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA) {
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
block |= (u64)tf->hob_lbah << 40;
|
|
block |= (u64)tf->hob_lbam << 32;
|
|
block |= (u64)tf->hob_lbal << 24;
|
|
} else
|
|
block |= (tf->device & 0xf) << 24;
|
|
|
|
block |= tf->lbah << 16;
|
|
block |= tf->lbam << 8;
|
|
block |= tf->lbal;
|
|
} else {
|
|
u32 cyl, head, sect;
|
|
|
|
cyl = tf->lbam | (tf->lbah << 8);
|
|
head = tf->device & 0xf;
|
|
sect = tf->lbal;
|
|
|
|
if (!sect) {
|
|
ata_dev_warn(dev,
|
|
"device reported invalid CHS sector 0\n");
|
|
return U64_MAX;
|
|
}
|
|
|
|
block = (cyl * dev->heads + head) * dev->sectors + sect - 1;
|
|
}
|
|
|
|
return block;
|
|
}
|
|
|
|
/**
|
|
* ata_build_rw_tf - Build ATA taskfile for given read/write request
|
|
* @tf: Target ATA taskfile
|
|
* @dev: ATA device @tf belongs to
|
|
* @block: Block address
|
|
* @n_block: Number of blocks
|
|
* @tf_flags: RW/FUA etc...
|
|
* @tag: tag
|
|
* @class: IO priority class
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* Build ATA taskfile @tf for read/write request described by
|
|
* @block, @n_block, @tf_flags and @tag on @dev.
|
|
*
|
|
* RETURNS:
|
|
*
|
|
* 0 on success, -ERANGE if the request is too large for @dev,
|
|
* -EINVAL if the request is invalid.
|
|
*/
|
|
int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
|
|
u64 block, u32 n_block, unsigned int tf_flags,
|
|
unsigned int tag, int class)
|
|
{
|
|
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
tf->flags |= tf_flags;
|
|
|
|
if (ata_ncq_enabled(dev) && !ata_tag_internal(tag)) {
|
|
/* yay, NCQ */
|
|
if (!lba_48_ok(block, n_block))
|
|
return -ERANGE;
|
|
|
|
tf->protocol = ATA_PROT_NCQ;
|
|
tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
|
|
|
|
if (tf->flags & ATA_TFLAG_WRITE)
|
|
tf->command = ATA_CMD_FPDMA_WRITE;
|
|
else
|
|
tf->command = ATA_CMD_FPDMA_READ;
|
|
|
|
tf->nsect = tag << 3;
|
|
tf->hob_feature = (n_block >> 8) & 0xff;
|
|
tf->feature = n_block & 0xff;
|
|
|
|
tf->hob_lbah = (block >> 40) & 0xff;
|
|
tf->hob_lbam = (block >> 32) & 0xff;
|
|
tf->hob_lbal = (block >> 24) & 0xff;
|
|
tf->lbah = (block >> 16) & 0xff;
|
|
tf->lbam = (block >> 8) & 0xff;
|
|
tf->lbal = block & 0xff;
|
|
|
|
tf->device = ATA_LBA;
|
|
if (tf->flags & ATA_TFLAG_FUA)
|
|
tf->device |= 1 << 7;
|
|
|
|
if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE &&
|
|
class == IOPRIO_CLASS_RT)
|
|
tf->hob_nsect |= ATA_PRIO_HIGH << ATA_SHIFT_PRIO;
|
|
} else if (dev->flags & ATA_DFLAG_LBA) {
|
|
tf->flags |= ATA_TFLAG_LBA;
|
|
|
|
if (lba_28_ok(block, n_block)) {
|
|
/* use LBA28 */
|
|
tf->device |= (block >> 24) & 0xf;
|
|
} else if (lba_48_ok(block, n_block)) {
|
|
if (!(dev->flags & ATA_DFLAG_LBA48))
|
|
return -ERANGE;
|
|
|
|
/* use LBA48 */
|
|
tf->flags |= ATA_TFLAG_LBA48;
|
|
|
|
tf->hob_nsect = (n_block >> 8) & 0xff;
|
|
|
|
tf->hob_lbah = (block >> 40) & 0xff;
|
|
tf->hob_lbam = (block >> 32) & 0xff;
|
|
tf->hob_lbal = (block >> 24) & 0xff;
|
|
} else
|
|
/* request too large even for LBA48 */
|
|
return -ERANGE;
|
|
|
|
if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
|
|
return -EINVAL;
|
|
|
|
tf->nsect = n_block & 0xff;
|
|
|
|
tf->lbah = (block >> 16) & 0xff;
|
|
tf->lbam = (block >> 8) & 0xff;
|
|
tf->lbal = block & 0xff;
|
|
|
|
tf->device |= ATA_LBA;
|
|
} else {
|
|
/* CHS */
|
|
u32 sect, head, cyl, track;
|
|
|
|
/* The request -may- be too large for CHS addressing. */
|
|
if (!lba_28_ok(block, n_block))
|
|
return -ERANGE;
|
|
|
|
if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
|
|
return -EINVAL;
|
|
|
|
/* Convert LBA to CHS */
|
|
track = (u32)block / dev->sectors;
|
|
cyl = track / dev->heads;
|
|
head = track % dev->heads;
|
|
sect = (u32)block % dev->sectors + 1;
|
|
|
|
DPRINTK("block %u track %u cyl %u head %u sect %u\n",
|
|
(u32)block, track, cyl, head, sect);
|
|
|
|
/* Check whether the converted CHS can fit.
|
|
Cylinder: 0-65535
|
|
Head: 0-15
|
|
Sector: 1-255*/
|
|
if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
|
|
return -ERANGE;
|
|
|
|
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
|
|
tf->lbal = sect;
|
|
tf->lbam = cyl;
|
|
tf->lbah = cyl >> 8;
|
|
tf->device |= head;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
|
|
* @pio_mask: pio_mask
|
|
* @mwdma_mask: mwdma_mask
|
|
* @udma_mask: udma_mask
|
|
*
|
|
* Pack @pio_mask, @mwdma_mask and @udma_mask into a single
|
|
* unsigned int xfer_mask.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Packed xfer_mask.
|
|
*/
|
|
unsigned long ata_pack_xfermask(unsigned long pio_mask,
|
|
unsigned long mwdma_mask,
|
|
unsigned long udma_mask)
|
|
{
|
|
return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) |
|
|
((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
|
|
((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pack_xfermask);
|
|
|
|
/**
|
|
* ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
|
|
* @xfer_mask: xfer_mask to unpack
|
|
* @pio_mask: resulting pio_mask
|
|
* @mwdma_mask: resulting mwdma_mask
|
|
* @udma_mask: resulting udma_mask
|
|
*
|
|
* Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
|
|
* Any NULL destination masks will be ignored.
|
|
*/
|
|
void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask,
|
|
unsigned long *mwdma_mask, unsigned long *udma_mask)
|
|
{
|
|
if (pio_mask)
|
|
*pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
|
|
if (mwdma_mask)
|
|
*mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA;
|
|
if (udma_mask)
|
|
*udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
|
|
}
|
|
|
|
static const struct ata_xfer_ent {
|
|
int shift, bits;
|
|
u8 base;
|
|
} ata_xfer_tbl[] = {
|
|
{ ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 },
|
|
{ ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 },
|
|
{ ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 },
|
|
{ -1, },
|
|
};
|
|
|
|
/**
|
|
* ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask
|
|
* @xfer_mask: xfer_mask of interest
|
|
*
|
|
* Return matching XFER_* value for @xfer_mask. Only the highest
|
|
* bit of @xfer_mask is considered.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Matching XFER_* value, 0xff if no match found.
|
|
*/
|
|
u8 ata_xfer_mask2mode(unsigned long xfer_mask)
|
|
{
|
|
int highbit = fls(xfer_mask) - 1;
|
|
const struct ata_xfer_ent *ent;
|
|
|
|
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
|
|
if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
|
|
return ent->base + highbit - ent->shift;
|
|
return 0xff;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
|
|
|
|
/**
|
|
* ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
|
|
* @xfer_mode: XFER_* of interest
|
|
*
|
|
* Return matching xfer_mask for @xfer_mode.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Matching xfer_mask, 0 if no match found.
|
|
*/
|
|
unsigned long ata_xfer_mode2mask(u8 xfer_mode)
|
|
{
|
|
const struct ata_xfer_ent *ent;
|
|
|
|
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
|
|
if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
|
|
return ((2 << (ent->shift + xfer_mode - ent->base)) - 1)
|
|
& ~((1 << ent->shift) - 1);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
|
|
|
|
/**
|
|
* ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
|
|
* @xfer_mode: XFER_* of interest
|
|
*
|
|
* Return matching xfer_shift for @xfer_mode.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Matching xfer_shift, -1 if no match found.
|
|
*/
|
|
int ata_xfer_mode2shift(unsigned long xfer_mode)
|
|
{
|
|
const struct ata_xfer_ent *ent;
|
|
|
|
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
|
|
if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
|
|
return ent->shift;
|
|
return -1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
|
|
|
|
/**
|
|
* ata_mode_string - convert xfer_mask to string
|
|
* @xfer_mask: mask of bits supported; only highest bit counts.
|
|
*
|
|
* Determine string which represents the highest speed
|
|
* (highest bit in @modemask).
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Constant C string representing highest speed listed in
|
|
* @mode_mask, or the constant C string "<n/a>".
|
|
*/
|
|
const char *ata_mode_string(unsigned long xfer_mask)
|
|
{
|
|
static const char * const xfer_mode_str[] = {
|
|
"PIO0",
|
|
"PIO1",
|
|
"PIO2",
|
|
"PIO3",
|
|
"PIO4",
|
|
"PIO5",
|
|
"PIO6",
|
|
"MWDMA0",
|
|
"MWDMA1",
|
|
"MWDMA2",
|
|
"MWDMA3",
|
|
"MWDMA4",
|
|
"UDMA/16",
|
|
"UDMA/25",
|
|
"UDMA/33",
|
|
"UDMA/44",
|
|
"UDMA/66",
|
|
"UDMA/100",
|
|
"UDMA/133",
|
|
"UDMA7",
|
|
};
|
|
int highbit;
|
|
|
|
highbit = fls(xfer_mask) - 1;
|
|
if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str))
|
|
return xfer_mode_str[highbit];
|
|
return "<n/a>";
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_mode_string);
|
|
|
|
const char *sata_spd_string(unsigned int spd)
|
|
{
|
|
static const char * const spd_str[] = {
|
|
"1.5 Gbps",
|
|
"3.0 Gbps",
|
|
"6.0 Gbps",
|
|
};
|
|
|
|
if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
|
|
return "<unknown>";
|
|
return spd_str[spd - 1];
|
|
}
|
|
|
|
/**
|
|
* ata_dev_classify - determine device type based on ATA-spec signature
|
|
* @tf: ATA taskfile register set for device to be identified
|
|
*
|
|
* Determine from taskfile register contents whether a device is
|
|
* ATA or ATAPI, as per "Signature and persistence" section
|
|
* of ATA/PI spec (volume 1, sect 5.14).
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP,
|
|
* %ATA_DEV_ZAC, or %ATA_DEV_UNKNOWN the event of failure.
|
|
*/
|
|
unsigned int ata_dev_classify(const struct ata_taskfile *tf)
|
|
{
|
|
/* Apple's open source Darwin code hints that some devices only
|
|
* put a proper signature into the LBA mid/high registers,
|
|
* So, we only check those. It's sufficient for uniqueness.
|
|
*
|
|
* ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate
|
|
* signatures for ATA and ATAPI devices attached on SerialATA,
|
|
* 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA
|
|
* spec has never mentioned about using different signatures
|
|
* for ATA/ATAPI devices. Then, Serial ATA II: Port
|
|
* Multiplier specification began to use 0x69/0x96 to identify
|
|
* port multpliers and 0x3c/0xc3 to identify SEMB device.
|
|
* ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and
|
|
* 0x69/0x96 shortly and described them as reserved for
|
|
* SerialATA.
|
|
*
|
|
* We follow the current spec and consider that 0x69/0x96
|
|
* identifies a port multiplier and 0x3c/0xc3 a SEMB device.
|
|
* Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
|
|
* SEMB signature. This is worked around in
|
|
* ata_dev_read_id().
|
|
*/
|
|
if ((tf->lbam == 0) && (tf->lbah == 0)) {
|
|
DPRINTK("found ATA device by sig\n");
|
|
return ATA_DEV_ATA;
|
|
}
|
|
|
|
if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) {
|
|
DPRINTK("found ATAPI device by sig\n");
|
|
return ATA_DEV_ATAPI;
|
|
}
|
|
|
|
if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) {
|
|
DPRINTK("found PMP device by sig\n");
|
|
return ATA_DEV_PMP;
|
|
}
|
|
|
|
if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
|
|
DPRINTK("found SEMB device by sig (could be ATA device)\n");
|
|
return ATA_DEV_SEMB;
|
|
}
|
|
|
|
if ((tf->lbam == 0xcd) && (tf->lbah == 0xab)) {
|
|
DPRINTK("found ZAC device by sig\n");
|
|
return ATA_DEV_ZAC;
|
|
}
|
|
|
|
DPRINTK("unknown device\n");
|
|
return ATA_DEV_UNKNOWN;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_dev_classify);
|
|
|
|
/**
|
|
* ata_id_string - Convert IDENTIFY DEVICE page into string
|
|
* @id: IDENTIFY DEVICE results we will examine
|
|
* @s: string into which data is output
|
|
* @ofs: offset into identify device page
|
|
* @len: length of string to return. must be an even number.
|
|
*
|
|
* The strings in the IDENTIFY DEVICE page are broken up into
|
|
* 16-bit chunks. Run through the string, and output each
|
|
* 8-bit chunk linearly, regardless of platform.
|
|
*
|
|
* LOCKING:
|
|
* caller.
|
|
*/
|
|
|
|
void ata_id_string(const u16 *id, unsigned char *s,
|
|
unsigned int ofs, unsigned int len)
|
|
{
|
|
unsigned int c;
|
|
|
|
BUG_ON(len & 1);
|
|
|
|
while (len > 0) {
|
|
c = id[ofs] >> 8;
|
|
*s = c;
|
|
s++;
|
|
|
|
c = id[ofs] & 0xff;
|
|
*s = c;
|
|
s++;
|
|
|
|
ofs++;
|
|
len -= 2;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_id_string);
|
|
|
|
/**
|
|
* ata_id_c_string - Convert IDENTIFY DEVICE page into C string
|
|
* @id: IDENTIFY DEVICE results we will examine
|
|
* @s: string into which data is output
|
|
* @ofs: offset into identify device page
|
|
* @len: length of string to return. must be an odd number.
|
|
*
|
|
* This function is identical to ata_id_string except that it
|
|
* trims trailing spaces and terminates the resulting string with
|
|
* null. @len must be actual maximum length (even number) + 1.
|
|
*
|
|
* LOCKING:
|
|
* caller.
|
|
*/
|
|
void ata_id_c_string(const u16 *id, unsigned char *s,
|
|
unsigned int ofs, unsigned int len)
|
|
{
|
|
unsigned char *p;
|
|
|
|
ata_id_string(id, s, ofs, len - 1);
|
|
|
|
p = s + strnlen(s, len - 1);
|
|
while (p > s && p[-1] == ' ')
|
|
p--;
|
|
*p = '\0';
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_id_c_string);
|
|
|
|
static u64 ata_id_n_sectors(const u16 *id)
|
|
{
|
|
if (ata_id_has_lba(id)) {
|
|
if (ata_id_has_lba48(id))
|
|
return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
|
|
else
|
|
return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
|
|
} else {
|
|
if (ata_id_current_chs_valid(id))
|
|
return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
|
|
id[ATA_ID_CUR_SECTORS];
|
|
else
|
|
return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
|
|
id[ATA_ID_SECTORS];
|
|
}
|
|
}
|
|
|
|
u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
|
|
{
|
|
u64 sectors = 0;
|
|
|
|
sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
|
|
sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
|
|
sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
|
|
sectors |= (tf->lbah & 0xff) << 16;
|
|
sectors |= (tf->lbam & 0xff) << 8;
|
|
sectors |= (tf->lbal & 0xff);
|
|
|
|
return sectors;
|
|
}
|
|
|
|
u64 ata_tf_to_lba(const struct ata_taskfile *tf)
|
|
{
|
|
u64 sectors = 0;
|
|
|
|
sectors |= (tf->device & 0x0f) << 24;
|
|
sectors |= (tf->lbah & 0xff) << 16;
|
|
sectors |= (tf->lbam & 0xff) << 8;
|
|
sectors |= (tf->lbal & 0xff);
|
|
|
|
return sectors;
|
|
}
|
|
|
|
/**
|
|
* ata_read_native_max_address - Read native max address
|
|
* @dev: target device
|
|
* @max_sectors: out parameter for the result native max address
|
|
*
|
|
* Perform an LBA48 or LBA28 native size query upon the device in
|
|
* question.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -EACCES if command is aborted by the drive.
|
|
* -EIO on other errors.
|
|
*/
|
|
static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
|
|
{
|
|
unsigned int err_mask;
|
|
struct ata_taskfile tf;
|
|
int lba48 = ata_id_has_lba48(dev->id);
|
|
|
|
ata_tf_init(dev, &tf);
|
|
|
|
/* always clear all address registers */
|
|
tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
|
|
|
|
if (lba48) {
|
|
tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
|
|
tf.flags |= ATA_TFLAG_LBA48;
|
|
} else
|
|
tf.command = ATA_CMD_READ_NATIVE_MAX;
|
|
|
|
tf.protocol = ATA_PROT_NODATA;
|
|
tf.device |= ATA_LBA;
|
|
|
|
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
|
|
if (err_mask) {
|
|
ata_dev_warn(dev,
|
|
"failed to read native max address (err_mask=0x%x)\n",
|
|
err_mask);
|
|
if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
|
|
return -EACCES;
|
|
return -EIO;
|
|
}
|
|
|
|
if (lba48)
|
|
*max_sectors = ata_tf_to_lba48(&tf) + 1;
|
|
else
|
|
*max_sectors = ata_tf_to_lba(&tf) + 1;
|
|
if (dev->horkage & ATA_HORKAGE_HPA_SIZE)
|
|
(*max_sectors)--;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_set_max_sectors - Set max sectors
|
|
* @dev: target device
|
|
* @new_sectors: new max sectors value to set for the device
|
|
*
|
|
* Set max sectors of @dev to @new_sectors.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -EACCES if command is aborted or denied (due to
|
|
* previous non-volatile SET_MAX) by the drive. -EIO on other
|
|
* errors.
|
|
*/
|
|
static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
|
|
{
|
|
unsigned int err_mask;
|
|
struct ata_taskfile tf;
|
|
int lba48 = ata_id_has_lba48(dev->id);
|
|
|
|
new_sectors--;
|
|
|
|
ata_tf_init(dev, &tf);
|
|
|
|
tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
|
|
|
|
if (lba48) {
|
|
tf.command = ATA_CMD_SET_MAX_EXT;
|
|
tf.flags |= ATA_TFLAG_LBA48;
|
|
|
|
tf.hob_lbal = (new_sectors >> 24) & 0xff;
|
|
tf.hob_lbam = (new_sectors >> 32) & 0xff;
|
|
tf.hob_lbah = (new_sectors >> 40) & 0xff;
|
|
} else {
|
|
tf.command = ATA_CMD_SET_MAX;
|
|
|
|
tf.device |= (new_sectors >> 24) & 0xf;
|
|
}
|
|
|
|
tf.protocol = ATA_PROT_NODATA;
|
|
tf.device |= ATA_LBA;
|
|
|
|
tf.lbal = (new_sectors >> 0) & 0xff;
|
|
tf.lbam = (new_sectors >> 8) & 0xff;
|
|
tf.lbah = (new_sectors >> 16) & 0xff;
|
|
|
|
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
|
|
if (err_mask) {
|
|
ata_dev_warn(dev,
|
|
"failed to set max address (err_mask=0x%x)\n",
|
|
err_mask);
|
|
if (err_mask == AC_ERR_DEV &&
|
|
(tf.feature & (ATA_ABORTED | ATA_IDNF)))
|
|
return -EACCES;
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_hpa_resize - Resize a device with an HPA set
|
|
* @dev: Device to resize
|
|
*
|
|
* Read the size of an LBA28 or LBA48 disk with HPA features and resize
|
|
* it if required to the full size of the media. The caller must check
|
|
* the drive has the HPA feature set enabled.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno on failure.
|
|
*/
|
|
static int ata_hpa_resize(struct ata_device *dev)
|
|
{
|
|
bool print_info = ata_dev_print_info(dev);
|
|
bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA;
|
|
u64 sectors = ata_id_n_sectors(dev->id);
|
|
u64 native_sectors;
|
|
int rc;
|
|
|
|
/* do we need to do it? */
|
|
if ((dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) ||
|
|
!ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) ||
|
|
(dev->horkage & ATA_HORKAGE_BROKEN_HPA))
|
|
return 0;
|
|
|
|
/* read native max address */
|
|
rc = ata_read_native_max_address(dev, &native_sectors);
|
|
if (rc) {
|
|
/* If device aborted the command or HPA isn't going to
|
|
* be unlocked, skip HPA resizing.
|
|
*/
|
|
if (rc == -EACCES || !unlock_hpa) {
|
|
ata_dev_warn(dev,
|
|
"HPA support seems broken, skipping HPA handling\n");
|
|
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
|
|
|
|
/* we can continue if device aborted the command */
|
|
if (rc == -EACCES)
|
|
rc = 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
dev->n_native_sectors = native_sectors;
|
|
|
|
/* nothing to do? */
|
|
if (native_sectors <= sectors || !unlock_hpa) {
|
|
if (!print_info || native_sectors == sectors)
|
|
return 0;
|
|
|
|
if (native_sectors > sectors)
|
|
ata_dev_info(dev,
|
|
"HPA detected: current %llu, native %llu\n",
|
|
(unsigned long long)sectors,
|
|
(unsigned long long)native_sectors);
|
|
else if (native_sectors < sectors)
|
|
ata_dev_warn(dev,
|
|
"native sectors (%llu) is smaller than sectors (%llu)\n",
|
|
(unsigned long long)native_sectors,
|
|
(unsigned long long)sectors);
|
|
return 0;
|
|
}
|
|
|
|
/* let's unlock HPA */
|
|
rc = ata_set_max_sectors(dev, native_sectors);
|
|
if (rc == -EACCES) {
|
|
/* if device aborted the command, skip HPA resizing */
|
|
ata_dev_warn(dev,
|
|
"device aborted resize (%llu -> %llu), skipping HPA handling\n",
|
|
(unsigned long long)sectors,
|
|
(unsigned long long)native_sectors);
|
|
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
|
|
return 0;
|
|
} else if (rc)
|
|
return rc;
|
|
|
|
/* re-read IDENTIFY data */
|
|
rc = ata_dev_reread_id(dev, 0);
|
|
if (rc) {
|
|
ata_dev_err(dev,
|
|
"failed to re-read IDENTIFY data after HPA resizing\n");
|
|
return rc;
|
|
}
|
|
|
|
if (print_info) {
|
|
u64 new_sectors = ata_id_n_sectors(dev->id);
|
|
ata_dev_info(dev,
|
|
"HPA unlocked: %llu -> %llu, native %llu\n",
|
|
(unsigned long long)sectors,
|
|
(unsigned long long)new_sectors,
|
|
(unsigned long long)native_sectors);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_dump_id - IDENTIFY DEVICE info debugging output
|
|
* @id: IDENTIFY DEVICE page to dump
|
|
*
|
|
* Dump selected 16-bit words from the given IDENTIFY DEVICE
|
|
* page.
|
|
*
|
|
* LOCKING:
|
|
* caller.
|
|
*/
|
|
|
|
static inline void ata_dump_id(const u16 *id)
|
|
{
|
|
DPRINTK("49==0x%04x "
|
|
"53==0x%04x "
|
|
"63==0x%04x "
|
|
"64==0x%04x "
|
|
"75==0x%04x \n",
|
|
id[49],
|
|
id[53],
|
|
id[63],
|
|
id[64],
|
|
id[75]);
|
|
DPRINTK("80==0x%04x "
|
|
"81==0x%04x "
|
|
"82==0x%04x "
|
|
"83==0x%04x "
|
|
"84==0x%04x \n",
|
|
id[80],
|
|
id[81],
|
|
id[82],
|
|
id[83],
|
|
id[84]);
|
|
DPRINTK("88==0x%04x "
|
|
"93==0x%04x\n",
|
|
id[88],
|
|
id[93]);
|
|
}
|
|
|
|
/**
|
|
* ata_id_xfermask - Compute xfermask from the given IDENTIFY data
|
|
* @id: IDENTIFY data to compute xfer mask from
|
|
*
|
|
* Compute the xfermask for this device. This is not as trivial
|
|
* as it seems if we must consider early devices correctly.
|
|
*
|
|
* FIXME: pre IDE drive timing (do we care ?).
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Computed xfermask
|
|
*/
|
|
unsigned long ata_id_xfermask(const u16 *id)
|
|
{
|
|
unsigned long pio_mask, mwdma_mask, udma_mask;
|
|
|
|
/* Usual case. Word 53 indicates word 64 is valid */
|
|
if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
|
|
pio_mask = id[ATA_ID_PIO_MODES] & 0x03;
|
|
pio_mask <<= 3;
|
|
pio_mask |= 0x7;
|
|
} else {
|
|
/* If word 64 isn't valid then Word 51 high byte holds
|
|
* the PIO timing number for the maximum. Turn it into
|
|
* a mask.
|
|
*/
|
|
u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
|
|
if (mode < 5) /* Valid PIO range */
|
|
pio_mask = (2 << mode) - 1;
|
|
else
|
|
pio_mask = 1;
|
|
|
|
/* But wait.. there's more. Design your standards by
|
|
* committee and you too can get a free iordy field to
|
|
* process. However its the speeds not the modes that
|
|
* are supported... Note drivers using the timing API
|
|
* will get this right anyway
|
|
*/
|
|
}
|
|
|
|
mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07;
|
|
|
|
if (ata_id_is_cfa(id)) {
|
|
/*
|
|
* Process compact flash extended modes
|
|
*/
|
|
int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
|
|
int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
|
|
|
|
if (pio)
|
|
pio_mask |= (1 << 5);
|
|
if (pio > 1)
|
|
pio_mask |= (1 << 6);
|
|
if (dma)
|
|
mwdma_mask |= (1 << 3);
|
|
if (dma > 1)
|
|
mwdma_mask |= (1 << 4);
|
|
}
|
|
|
|
udma_mask = 0;
|
|
if (id[ATA_ID_FIELD_VALID] & (1 << 2))
|
|
udma_mask = id[ATA_ID_UDMA_MODES] & 0xff;
|
|
|
|
return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_id_xfermask);
|
|
|
|
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
|
|
{
|
|
struct completion *waiting = qc->private_data;
|
|
|
|
complete(waiting);
|
|
}
|
|
|
|
/**
|
|
* ata_exec_internal_sg - execute libata internal command
|
|
* @dev: Device to which the command is sent
|
|
* @tf: Taskfile registers for the command and the result
|
|
* @cdb: CDB for packet command
|
|
* @dma_dir: Data transfer direction of the command
|
|
* @sgl: sg list for the data buffer of the command
|
|
* @n_elem: Number of sg entries
|
|
* @timeout: Timeout in msecs (0 for default)
|
|
*
|
|
* Executes libata internal command with timeout. @tf contains
|
|
* command on entry and result on return. Timeout and error
|
|
* conditions are reported via return value. No recovery action
|
|
* is taken after a command times out. It's caller's duty to
|
|
* clean up after timeout.
|
|
*
|
|
* LOCKING:
|
|
* None. Should be called with kernel context, might sleep.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, AC_ERR_* mask on failure
|
|
*/
|
|
unsigned ata_exec_internal_sg(struct ata_device *dev,
|
|
struct ata_taskfile *tf, const u8 *cdb,
|
|
int dma_dir, struct scatterlist *sgl,
|
|
unsigned int n_elem, unsigned long timeout)
|
|
{
|
|
struct ata_link *link = dev->link;
|
|
struct ata_port *ap = link->ap;
|
|
u8 command = tf->command;
|
|
int auto_timeout = 0;
|
|
struct ata_queued_cmd *qc;
|
|
unsigned int preempted_tag;
|
|
u32 preempted_sactive;
|
|
u64 preempted_qc_active;
|
|
int preempted_nr_active_links;
|
|
DECLARE_COMPLETION_ONSTACK(wait);
|
|
unsigned long flags;
|
|
unsigned int err_mask;
|
|
int rc;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
/* no internal command while frozen */
|
|
if (ap->pflags & ATA_PFLAG_FROZEN) {
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
return AC_ERR_SYSTEM;
|
|
}
|
|
|
|
/* initialize internal qc */
|
|
qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
|
|
|
|
qc->tag = ATA_TAG_INTERNAL;
|
|
qc->hw_tag = 0;
|
|
qc->scsicmd = NULL;
|
|
qc->ap = ap;
|
|
qc->dev = dev;
|
|
ata_qc_reinit(qc);
|
|
|
|
preempted_tag = link->active_tag;
|
|
preempted_sactive = link->sactive;
|
|
preempted_qc_active = ap->qc_active;
|
|
preempted_nr_active_links = ap->nr_active_links;
|
|
link->active_tag = ATA_TAG_POISON;
|
|
link->sactive = 0;
|
|
ap->qc_active = 0;
|
|
ap->nr_active_links = 0;
|
|
|
|
/* prepare & issue qc */
|
|
qc->tf = *tf;
|
|
if (cdb)
|
|
memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
|
|
|
|
/* some SATA bridges need us to indicate data xfer direction */
|
|
if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) &&
|
|
dma_dir == DMA_FROM_DEVICE)
|
|
qc->tf.feature |= ATAPI_DMADIR;
|
|
|
|
qc->flags |= ATA_QCFLAG_RESULT_TF;
|
|
qc->dma_dir = dma_dir;
|
|
if (dma_dir != DMA_NONE) {
|
|
unsigned int i, buflen = 0;
|
|
struct scatterlist *sg;
|
|
|
|
for_each_sg(sgl, sg, n_elem, i)
|
|
buflen += sg->length;
|
|
|
|
ata_sg_init(qc, sgl, n_elem);
|
|
qc->nbytes = buflen;
|
|
}
|
|
|
|
qc->private_data = &wait;
|
|
qc->complete_fn = ata_qc_complete_internal;
|
|
|
|
ata_qc_issue(qc);
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
if (!timeout) {
|
|
if (ata_probe_timeout)
|
|
timeout = ata_probe_timeout * 1000;
|
|
else {
|
|
timeout = ata_internal_cmd_timeout(dev, command);
|
|
auto_timeout = 1;
|
|
}
|
|
}
|
|
|
|
if (ap->ops->error_handler)
|
|
ata_eh_release(ap);
|
|
|
|
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
|
|
|
|
if (ap->ops->error_handler)
|
|
ata_eh_acquire(ap);
|
|
|
|
ata_sff_flush_pio_task(ap);
|
|
|
|
if (!rc) {
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
/* We're racing with irq here. If we lose, the
|
|
* following test prevents us from completing the qc
|
|
* twice. If we win, the port is frozen and will be
|
|
* cleaned up by ->post_internal_cmd().
|
|
*/
|
|
if (qc->flags & ATA_QCFLAG_ACTIVE) {
|
|
qc->err_mask |= AC_ERR_TIMEOUT;
|
|
|
|
if (ap->ops->error_handler)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_qc_complete(qc);
|
|
|
|
if (ata_msg_warn(ap))
|
|
ata_dev_warn(dev, "qc timeout (cmd 0x%x)\n",
|
|
command);
|
|
}
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
}
|
|
|
|
/* do post_internal_cmd */
|
|
if (ap->ops->post_internal_cmd)
|
|
ap->ops->post_internal_cmd(qc);
|
|
|
|
/* perform minimal error analysis */
|
|
if (qc->flags & ATA_QCFLAG_FAILED) {
|
|
if (qc->result_tf.command & (ATA_ERR | ATA_DF))
|
|
qc->err_mask |= AC_ERR_DEV;
|
|
|
|
if (!qc->err_mask)
|
|
qc->err_mask |= AC_ERR_OTHER;
|
|
|
|
if (qc->err_mask & ~AC_ERR_OTHER)
|
|
qc->err_mask &= ~AC_ERR_OTHER;
|
|
} else if (qc->tf.command == ATA_CMD_REQ_SENSE_DATA) {
|
|
qc->result_tf.command |= ATA_SENSE;
|
|
}
|
|
|
|
/* finish up */
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
*tf = qc->result_tf;
|
|
err_mask = qc->err_mask;
|
|
|
|
ata_qc_free(qc);
|
|
link->active_tag = preempted_tag;
|
|
link->sactive = preempted_sactive;
|
|
ap->qc_active = preempted_qc_active;
|
|
ap->nr_active_links = preempted_nr_active_links;
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
|
|
ata_internal_cmd_timed_out(dev, command);
|
|
|
|
return err_mask;
|
|
}
|
|
|
|
/**
|
|
* ata_exec_internal - execute libata internal command
|
|
* @dev: Device to which the command is sent
|
|
* @tf: Taskfile registers for the command and the result
|
|
* @cdb: CDB for packet command
|
|
* @dma_dir: Data transfer direction of the command
|
|
* @buf: Data buffer of the command
|
|
* @buflen: Length of data buffer
|
|
* @timeout: Timeout in msecs (0 for default)
|
|
*
|
|
* Wrapper around ata_exec_internal_sg() which takes simple
|
|
* buffer instead of sg list.
|
|
*
|
|
* LOCKING:
|
|
* None. Should be called with kernel context, might sleep.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, AC_ERR_* mask on failure
|
|
*/
|
|
unsigned ata_exec_internal(struct ata_device *dev,
|
|
struct ata_taskfile *tf, const u8 *cdb,
|
|
int dma_dir, void *buf, unsigned int buflen,
|
|
unsigned long timeout)
|
|
{
|
|
struct scatterlist *psg = NULL, sg;
|
|
unsigned int n_elem = 0;
|
|
|
|
if (dma_dir != DMA_NONE) {
|
|
WARN_ON(!buf);
|
|
sg_init_one(&sg, buf, buflen);
|
|
psg = &sg;
|
|
n_elem++;
|
|
}
|
|
|
|
return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem,
|
|
timeout);
|
|
}
|
|
|
|
/**
|
|
* ata_pio_need_iordy - check if iordy needed
|
|
* @adev: ATA device
|
|
*
|
|
* Check if the current speed of the device requires IORDY. Used
|
|
* by various controllers for chip configuration.
|
|
*/
|
|
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
|
|
{
|
|
/* Don't set IORDY if we're preparing for reset. IORDY may
|
|
* lead to controller lock up on certain controllers if the
|
|
* port is not occupied. See bko#11703 for details.
|
|
*/
|
|
if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
|
|
return 0;
|
|
/* Controller doesn't support IORDY. Probably a pointless
|
|
* check as the caller should know this.
|
|
*/
|
|
if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
|
|
return 0;
|
|
/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
|
|
if (ata_id_is_cfa(adev->id)
|
|
&& (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6))
|
|
return 0;
|
|
/* PIO3 and higher it is mandatory */
|
|
if (adev->pio_mode > XFER_PIO_2)
|
|
return 1;
|
|
/* We turn it on when possible */
|
|
if (ata_id_has_iordy(adev->id))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
|
|
|
|
/**
|
|
* ata_pio_mask_no_iordy - Return the non IORDY mask
|
|
* @adev: ATA device
|
|
*
|
|
* Compute the highest mode possible if we are not using iordy. Return
|
|
* -1 if no iordy mode is available.
|
|
*/
|
|
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
|
|
{
|
|
/* If we have no drive specific rule, then PIO 2 is non IORDY */
|
|
if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
|
|
u16 pio = adev->id[ATA_ID_EIDE_PIO];
|
|
/* Is the speed faster than the drive allows non IORDY ? */
|
|
if (pio) {
|
|
/* This is cycle times not frequency - watch the logic! */
|
|
if (pio > 240) /* PIO2 is 240nS per cycle */
|
|
return 3 << ATA_SHIFT_PIO;
|
|
return 7 << ATA_SHIFT_PIO;
|
|
}
|
|
}
|
|
return 3 << ATA_SHIFT_PIO;
|
|
}
|
|
|
|
/**
|
|
* ata_do_dev_read_id - default ID read method
|
|
* @dev: device
|
|
* @tf: proposed taskfile
|
|
* @id: data buffer
|
|
*
|
|
* Issue the identify taskfile and hand back the buffer containing
|
|
* identify data. For some RAID controllers and for pre ATA devices
|
|
* this function is wrapped or replaced by the driver
|
|
*/
|
|
unsigned int ata_do_dev_read_id(struct ata_device *dev,
|
|
struct ata_taskfile *tf, u16 *id)
|
|
{
|
|
return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
|
|
id, sizeof(id[0]) * ATA_ID_WORDS, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
|
|
|
|
/**
|
|
* ata_dev_read_id - Read ID data from the specified device
|
|
* @dev: target device
|
|
* @p_class: pointer to class of the target device (may be changed)
|
|
* @flags: ATA_READID_* flags
|
|
* @id: buffer to read IDENTIFY data into
|
|
*
|
|
* Read ID data from the specified device. ATA_CMD_ID_ATA is
|
|
* performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
|
|
* devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
|
|
* for pre-ATA4 drives.
|
|
*
|
|
* FIXME: ATA_CMD_ID_ATA is optional for early drives and right
|
|
* now we abort if we hit that case.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
|
|
unsigned int flags, u16 *id)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int class = *p_class;
|
|
struct ata_taskfile tf;
|
|
unsigned int err_mask = 0;
|
|
const char *reason;
|
|
bool is_semb = class == ATA_DEV_SEMB;
|
|
int may_fallback = 1, tried_spinup = 0;
|
|
int rc;
|
|
|
|
if (ata_msg_ctl(ap))
|
|
ata_dev_dbg(dev, "%s: ENTER\n", __func__);
|
|
|
|
retry:
|
|
ata_tf_init(dev, &tf);
|
|
|
|
switch (class) {
|
|
case ATA_DEV_SEMB:
|
|
class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
|
|
fallthrough;
|
|
case ATA_DEV_ATA:
|
|
case ATA_DEV_ZAC:
|
|
tf.command = ATA_CMD_ID_ATA;
|
|
break;
|
|
case ATA_DEV_ATAPI:
|
|
tf.command = ATA_CMD_ID_ATAPI;
|
|
break;
|
|
default:
|
|
rc = -ENODEV;
|
|
reason = "unsupported class";
|
|
goto err_out;
|
|
}
|
|
|
|
tf.protocol = ATA_PROT_PIO;
|
|
|
|
/* Some devices choke if TF registers contain garbage. Make
|
|
* sure those are properly initialized.
|
|
*/
|
|
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
|
|
/* Device presence detection is unreliable on some
|
|
* controllers. Always poll IDENTIFY if available.
|
|
*/
|
|
tf.flags |= ATA_TFLAG_POLLING;
|
|
|
|
if (ap->ops->read_id)
|
|
err_mask = ap->ops->read_id(dev, &tf, id);
|
|
else
|
|
err_mask = ata_do_dev_read_id(dev, &tf, id);
|
|
|
|
if (err_mask) {
|
|
if (err_mask & AC_ERR_NODEV_HINT) {
|
|
ata_dev_dbg(dev, "NODEV after polling detection\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
if (is_semb) {
|
|
ata_dev_info(dev,
|
|
"IDENTIFY failed on device w/ SEMB sig, disabled\n");
|
|
/* SEMB is not supported yet */
|
|
*p_class = ATA_DEV_SEMB_UNSUP;
|
|
return 0;
|
|
}
|
|
|
|
if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
|
|
/* Device or controller might have reported
|
|
* the wrong device class. Give a shot at the
|
|
* other IDENTIFY if the current one is
|
|
* aborted by the device.
|
|
*/
|
|
if (may_fallback) {
|
|
may_fallback = 0;
|
|
|
|
if (class == ATA_DEV_ATA)
|
|
class = ATA_DEV_ATAPI;
|
|
else
|
|
class = ATA_DEV_ATA;
|
|
goto retry;
|
|
}
|
|
|
|
/* Control reaches here iff the device aborted
|
|
* both flavors of IDENTIFYs which happens
|
|
* sometimes with phantom devices.
|
|
*/
|
|
ata_dev_dbg(dev,
|
|
"both IDENTIFYs aborted, assuming NODEV\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
rc = -EIO;
|
|
reason = "I/O error";
|
|
goto err_out;
|
|
}
|
|
|
|
if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
|
|
ata_dev_dbg(dev, "dumping IDENTIFY data, "
|
|
"class=%d may_fallback=%d tried_spinup=%d\n",
|
|
class, may_fallback, tried_spinup);
|
|
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
|
|
16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
|
|
}
|
|
|
|
/* Falling back doesn't make sense if ID data was read
|
|
* successfully at least once.
|
|
*/
|
|
may_fallback = 0;
|
|
|
|
swap_buf_le16(id, ATA_ID_WORDS);
|
|
|
|
/* sanity check */
|
|
rc = -EINVAL;
|
|
reason = "device reports invalid type";
|
|
|
|
if (class == ATA_DEV_ATA || class == ATA_DEV_ZAC) {
|
|
if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
|
|
goto err_out;
|
|
if (ap->host->flags & ATA_HOST_IGNORE_ATA &&
|
|
ata_id_is_ata(id)) {
|
|
ata_dev_dbg(dev,
|
|
"host indicates ignore ATA devices, ignored\n");
|
|
return -ENOENT;
|
|
}
|
|
} else {
|
|
if (ata_id_is_ata(id))
|
|
goto err_out;
|
|
}
|
|
|
|
if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
|
|
tried_spinup = 1;
|
|
/*
|
|
* Drive powered-up in standby mode, and requires a specific
|
|
* SET_FEATURES spin-up subcommand before it will accept
|
|
* anything other than the original IDENTIFY command.
|
|
*/
|
|
err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0);
|
|
if (err_mask && id[2] != 0x738c) {
|
|
rc = -EIO;
|
|
reason = "SPINUP failed";
|
|
goto err_out;
|
|
}
|
|
/*
|
|
* If the drive initially returned incomplete IDENTIFY info,
|
|
* we now must reissue the IDENTIFY command.
|
|
*/
|
|
if (id[2] == 0x37c8)
|
|
goto retry;
|
|
}
|
|
|
|
if ((flags & ATA_READID_POSTRESET) &&
|
|
(class == ATA_DEV_ATA || class == ATA_DEV_ZAC)) {
|
|
/*
|
|
* The exact sequence expected by certain pre-ATA4 drives is:
|
|
* SRST RESET
|
|
* IDENTIFY (optional in early ATA)
|
|
* INITIALIZE DEVICE PARAMETERS (later IDE and ATA)
|
|
* anything else..
|
|
* Some drives were very specific about that exact sequence.
|
|
*
|
|
* Note that ATA4 says lba is mandatory so the second check
|
|
* should never trigger.
|
|
*/
|
|
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
|
|
err_mask = ata_dev_init_params(dev, id[3], id[6]);
|
|
if (err_mask) {
|
|
rc = -EIO;
|
|
reason = "INIT_DEV_PARAMS failed";
|
|
goto err_out;
|
|
}
|
|
|
|
/* current CHS translation info (id[53-58]) might be
|
|
* changed. reread the identify device info.
|
|
*/
|
|
flags &= ~ATA_READID_POSTRESET;
|
|
goto retry;
|
|
}
|
|
}
|
|
|
|
*p_class = class;
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
if (ata_msg_warn(ap))
|
|
ata_dev_warn(dev, "failed to IDENTIFY (%s, err_mask=0x%x)\n",
|
|
reason, err_mask);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_read_log_page - read a specific log page
|
|
* @dev: target device
|
|
* @log: log to read
|
|
* @page: page to read
|
|
* @buf: buffer to store read page
|
|
* @sectors: number of sectors to read
|
|
*
|
|
* Read log page using READ_LOG_EXT command.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, AC_ERR_* mask otherwise.
|
|
*/
|
|
unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
|
|
u8 page, void *buf, unsigned int sectors)
|
|
{
|
|
unsigned long ap_flags = dev->link->ap->flags;
|
|
struct ata_taskfile tf;
|
|
unsigned int err_mask;
|
|
bool dma = false;
|
|
|
|
DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
|
|
|
|
/*
|
|
* Return error without actually issuing the command on controllers
|
|
* which e.g. lockup on a read log page.
|
|
*/
|
|
if (ap_flags & ATA_FLAG_NO_LOG_PAGE)
|
|
return AC_ERR_DEV;
|
|
|
|
retry:
|
|
ata_tf_init(dev, &tf);
|
|
if (ata_dma_enabled(dev) && ata_id_has_read_log_dma_ext(dev->id) &&
|
|
!(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
|
|
tf.command = ATA_CMD_READ_LOG_DMA_EXT;
|
|
tf.protocol = ATA_PROT_DMA;
|
|
dma = true;
|
|
} else {
|
|
tf.command = ATA_CMD_READ_LOG_EXT;
|
|
tf.protocol = ATA_PROT_PIO;
|
|
dma = false;
|
|
}
|
|
tf.lbal = log;
|
|
tf.lbam = page;
|
|
tf.nsect = sectors;
|
|
tf.hob_nsect = sectors >> 8;
|
|
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
|
|
|
|
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
|
|
buf, sectors * ATA_SECT_SIZE, 0);
|
|
|
|
if (err_mask) {
|
|
if (dma) {
|
|
dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
|
|
goto retry;
|
|
}
|
|
ata_dev_err(dev, "Read log page 0x%02x failed, Emask 0x%x\n",
|
|
(unsigned int)page, err_mask);
|
|
}
|
|
|
|
return err_mask;
|
|
}
|
|
|
|
static bool ata_log_supported(struct ata_device *dev, u8 log)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
|
|
if (ata_read_log_page(dev, ATA_LOG_DIRECTORY, 0, ap->sector_buf, 1))
|
|
return false;
|
|
return get_unaligned_le16(&ap->sector_buf[log * 2]) ? true : false;
|
|
}
|
|
|
|
static bool ata_identify_page_supported(struct ata_device *dev, u8 page)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int err, i;
|
|
|
|
if (dev->horkage & ATA_HORKAGE_NO_ID_DEV_LOG)
|
|
return false;
|
|
|
|
if (!ata_log_supported(dev, ATA_LOG_IDENTIFY_DEVICE)) {
|
|
/*
|
|
* IDENTIFY DEVICE data log is defined as mandatory starting
|
|
* with ACS-3 (ATA version 10). Warn about the missing log
|
|
* for drives which implement this ATA level or above.
|
|
*/
|
|
if (ata_id_major_version(dev->id) >= 10)
|
|
ata_dev_warn(dev,
|
|
"ATA Identify Device Log not supported\n");
|
|
dev->horkage |= ATA_HORKAGE_NO_ID_DEV_LOG;
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Read IDENTIFY DEVICE data log, page 0, to figure out if the page is
|
|
* supported.
|
|
*/
|
|
err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, 0, ap->sector_buf,
|
|
1);
|
|
if (err)
|
|
return false;
|
|
|
|
for (i = 0; i < ap->sector_buf[8]; i++) {
|
|
if (ap->sector_buf[9 + i] == page)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int ata_do_link_spd_horkage(struct ata_device *dev)
|
|
{
|
|
struct ata_link *plink = ata_dev_phys_link(dev);
|
|
u32 target, target_limit;
|
|
|
|
if (!sata_scr_valid(plink))
|
|
return 0;
|
|
|
|
if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
|
|
target = 1;
|
|
else
|
|
return 0;
|
|
|
|
target_limit = (1 << target) - 1;
|
|
|
|
/* if already on stricter limit, no need to push further */
|
|
if (plink->sata_spd_limit <= target_limit)
|
|
return 0;
|
|
|
|
plink->sata_spd_limit = target_limit;
|
|
|
|
/* Request another EH round by returning -EAGAIN if link is
|
|
* going faster than the target speed. Forward progress is
|
|
* guaranteed by setting sata_spd_limit to target_limit above.
|
|
*/
|
|
if (plink->sata_spd > target) {
|
|
ata_dev_info(dev, "applying link speed limit horkage to %s\n",
|
|
sata_spd_string(target));
|
|
return -EAGAIN;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 ata_dev_knobble(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
|
|
if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
|
|
return 0;
|
|
|
|
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
|
|
}
|
|
|
|
static void ata_dev_config_ncq_send_recv(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int err_mask;
|
|
|
|
if (!ata_log_supported(dev, ATA_LOG_NCQ_SEND_RECV)) {
|
|
ata_dev_warn(dev, "NCQ Send/Recv Log not supported\n");
|
|
return;
|
|
}
|
|
err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV,
|
|
0, ap->sector_buf, 1);
|
|
if (!err_mask) {
|
|
u8 *cmds = dev->ncq_send_recv_cmds;
|
|
|
|
dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
|
|
memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
|
|
|
|
if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
|
|
ata_dev_dbg(dev, "disabling queued TRIM support\n");
|
|
cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
|
|
~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ata_dev_config_ncq_non_data(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int err_mask;
|
|
|
|
if (!ata_log_supported(dev, ATA_LOG_NCQ_NON_DATA)) {
|
|
ata_dev_warn(dev,
|
|
"NCQ Send/Recv Log not supported\n");
|
|
return;
|
|
}
|
|
err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA,
|
|
0, ap->sector_buf, 1);
|
|
if (!err_mask) {
|
|
u8 *cmds = dev->ncq_non_data_cmds;
|
|
|
|
memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_NON_DATA_SIZE);
|
|
}
|
|
}
|
|
|
|
static void ata_dev_config_ncq_prio(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int err_mask;
|
|
|
|
err_mask = ata_read_log_page(dev,
|
|
ATA_LOG_IDENTIFY_DEVICE,
|
|
ATA_LOG_SATA_SETTINGS,
|
|
ap->sector_buf,
|
|
1);
|
|
if (err_mask)
|
|
goto not_supported;
|
|
|
|
if (!(ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)))
|
|
goto not_supported;
|
|
|
|
dev->flags |= ATA_DFLAG_NCQ_PRIO;
|
|
|
|
return;
|
|
|
|
not_supported:
|
|
dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
|
|
dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
|
|
}
|
|
|
|
static bool ata_dev_check_adapter(struct ata_device *dev,
|
|
unsigned short vendor_id)
|
|
{
|
|
struct pci_dev *pcidev = NULL;
|
|
struct device *parent_dev = NULL;
|
|
|
|
for (parent_dev = dev->tdev.parent; parent_dev != NULL;
|
|
parent_dev = parent_dev->parent) {
|
|
if (dev_is_pci(parent_dev)) {
|
|
pcidev = to_pci_dev(parent_dev);
|
|
if (pcidev->vendor == vendor_id)
|
|
return true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int ata_dev_config_ncq(struct ata_device *dev,
|
|
char *desc, size_t desc_sz)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
|
|
unsigned int err_mask;
|
|
char *aa_desc = "";
|
|
|
|
if (!ata_id_has_ncq(dev->id)) {
|
|
desc[0] = '\0';
|
|
return 0;
|
|
}
|
|
if (!IS_ENABLED(CONFIG_SATA_HOST))
|
|
return 0;
|
|
if (dev->horkage & ATA_HORKAGE_NONCQ) {
|
|
snprintf(desc, desc_sz, "NCQ (not used)");
|
|
return 0;
|
|
}
|
|
|
|
if (dev->horkage & ATA_HORKAGE_NO_NCQ_ON_ATI &&
|
|
ata_dev_check_adapter(dev, PCI_VENDOR_ID_ATI)) {
|
|
snprintf(desc, desc_sz, "NCQ (not used)");
|
|
return 0;
|
|
}
|
|
|
|
if (ap->flags & ATA_FLAG_NCQ) {
|
|
hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE);
|
|
dev->flags |= ATA_DFLAG_NCQ;
|
|
}
|
|
|
|
if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) &&
|
|
(ap->flags & ATA_FLAG_FPDMA_AA) &&
|
|
ata_id_has_fpdma_aa(dev->id)) {
|
|
err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
|
|
SATA_FPDMA_AA);
|
|
if (err_mask) {
|
|
ata_dev_err(dev,
|
|
"failed to enable AA (error_mask=0x%x)\n",
|
|
err_mask);
|
|
if (err_mask != AC_ERR_DEV) {
|
|
dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
|
|
return -EIO;
|
|
}
|
|
} else
|
|
aa_desc = ", AA";
|
|
}
|
|
|
|
if (hdepth >= ddepth)
|
|
snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
|
|
else
|
|
snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
|
|
ddepth, aa_desc);
|
|
|
|
if ((ap->flags & ATA_FLAG_FPDMA_AUX)) {
|
|
if (ata_id_has_ncq_send_and_recv(dev->id))
|
|
ata_dev_config_ncq_send_recv(dev);
|
|
if (ata_id_has_ncq_non_data(dev->id))
|
|
ata_dev_config_ncq_non_data(dev);
|
|
if (ata_id_has_ncq_prio(dev->id))
|
|
ata_dev_config_ncq_prio(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ata_dev_config_sense_reporting(struct ata_device *dev)
|
|
{
|
|
unsigned int err_mask;
|
|
|
|
if (!ata_id_has_sense_reporting(dev->id))
|
|
return;
|
|
|
|
if (ata_id_sense_reporting_enabled(dev->id))
|
|
return;
|
|
|
|
err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
|
|
if (err_mask) {
|
|
ata_dev_dbg(dev,
|
|
"failed to enable Sense Data Reporting, Emask 0x%x\n",
|
|
err_mask);
|
|
}
|
|
}
|
|
|
|
static void ata_dev_config_zac(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int err_mask;
|
|
u8 *identify_buf = ap->sector_buf;
|
|
|
|
dev->zac_zones_optimal_open = U32_MAX;
|
|
dev->zac_zones_optimal_nonseq = U32_MAX;
|
|
dev->zac_zones_max_open = U32_MAX;
|
|
|
|
/*
|
|
* Always set the 'ZAC' flag for Host-managed devices.
|
|
*/
|
|
if (dev->class == ATA_DEV_ZAC)
|
|
dev->flags |= ATA_DFLAG_ZAC;
|
|
else if (ata_id_zoned_cap(dev->id) == 0x01)
|
|
/*
|
|
* Check for host-aware devices.
|
|
*/
|
|
dev->flags |= ATA_DFLAG_ZAC;
|
|
|
|
if (!(dev->flags & ATA_DFLAG_ZAC))
|
|
return;
|
|
|
|
if (!ata_identify_page_supported(dev, ATA_LOG_ZONED_INFORMATION)) {
|
|
ata_dev_warn(dev,
|
|
"ATA Zoned Information Log not supported\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read IDENTIFY DEVICE data log, page 9 (Zoned-device information)
|
|
*/
|
|
err_mask = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE,
|
|
ATA_LOG_ZONED_INFORMATION,
|
|
identify_buf, 1);
|
|
if (!err_mask) {
|
|
u64 zoned_cap, opt_open, opt_nonseq, max_open;
|
|
|
|
zoned_cap = get_unaligned_le64(&identify_buf[8]);
|
|
if ((zoned_cap >> 63))
|
|
dev->zac_zoned_cap = (zoned_cap & 1);
|
|
opt_open = get_unaligned_le64(&identify_buf[24]);
|
|
if ((opt_open >> 63))
|
|
dev->zac_zones_optimal_open = (u32)opt_open;
|
|
opt_nonseq = get_unaligned_le64(&identify_buf[32]);
|
|
if ((opt_nonseq >> 63))
|
|
dev->zac_zones_optimal_nonseq = (u32)opt_nonseq;
|
|
max_open = get_unaligned_le64(&identify_buf[40]);
|
|
if ((max_open >> 63))
|
|
dev->zac_zones_max_open = (u32)max_open;
|
|
}
|
|
}
|
|
|
|
static void ata_dev_config_trusted(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
u64 trusted_cap;
|
|
unsigned int err;
|
|
|
|
if (!ata_id_has_trusted(dev->id))
|
|
return;
|
|
|
|
if (!ata_identify_page_supported(dev, ATA_LOG_SECURITY)) {
|
|
ata_dev_warn(dev,
|
|
"Security Log not supported\n");
|
|
return;
|
|
}
|
|
|
|
err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, ATA_LOG_SECURITY,
|
|
ap->sector_buf, 1);
|
|
if (err)
|
|
return;
|
|
|
|
trusted_cap = get_unaligned_le64(&ap->sector_buf[40]);
|
|
if (!(trusted_cap & (1ULL << 63))) {
|
|
ata_dev_dbg(dev,
|
|
"Trusted Computing capability qword not valid!\n");
|
|
return;
|
|
}
|
|
|
|
if (trusted_cap & (1 << 0))
|
|
dev->flags |= ATA_DFLAG_TRUSTED;
|
|
}
|
|
|
|
static int ata_dev_config_lba(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
const u16 *id = dev->id;
|
|
const char *lba_desc;
|
|
char ncq_desc[24];
|
|
int ret;
|
|
|
|
dev->flags |= ATA_DFLAG_LBA;
|
|
|
|
if (ata_id_has_lba48(id)) {
|
|
lba_desc = "LBA48";
|
|
dev->flags |= ATA_DFLAG_LBA48;
|
|
if (dev->n_sectors >= (1UL << 28) &&
|
|
ata_id_has_flush_ext(id))
|
|
dev->flags |= ATA_DFLAG_FLUSH_EXT;
|
|
} else {
|
|
lba_desc = "LBA";
|
|
}
|
|
|
|
/* config NCQ */
|
|
ret = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
|
|
|
|
/* print device info to dmesg */
|
|
if (ata_msg_drv(ap) && ata_dev_print_info(dev))
|
|
ata_dev_info(dev,
|
|
"%llu sectors, multi %u: %s %s\n",
|
|
(unsigned long long)dev->n_sectors,
|
|
dev->multi_count, lba_desc, ncq_desc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ata_dev_config_chs(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
const u16 *id = dev->id;
|
|
|
|
if (ata_id_current_chs_valid(id)) {
|
|
/* Current CHS translation is valid. */
|
|
dev->cylinders = id[54];
|
|
dev->heads = id[55];
|
|
dev->sectors = id[56];
|
|
} else {
|
|
/* Default translation */
|
|
dev->cylinders = id[1];
|
|
dev->heads = id[3];
|
|
dev->sectors = id[6];
|
|
}
|
|
|
|
/* print device info to dmesg */
|
|
if (ata_msg_drv(ap) && ata_dev_print_info(dev))
|
|
ata_dev_info(dev,
|
|
"%llu sectors, multi %u, CHS %u/%u/%u\n",
|
|
(unsigned long long)dev->n_sectors,
|
|
dev->multi_count, dev->cylinders,
|
|
dev->heads, dev->sectors);
|
|
}
|
|
|
|
static void ata_dev_config_devslp(struct ata_device *dev)
|
|
{
|
|
u8 *sata_setting = dev->link->ap->sector_buf;
|
|
unsigned int err_mask;
|
|
int i, j;
|
|
|
|
/*
|
|
* Check device sleep capability. Get DevSlp timing variables
|
|
* from SATA Settings page of Identify Device Data Log.
|
|
*/
|
|
if (!ata_id_has_devslp(dev->id))
|
|
return;
|
|
|
|
err_mask = ata_read_log_page(dev,
|
|
ATA_LOG_IDENTIFY_DEVICE,
|
|
ATA_LOG_SATA_SETTINGS,
|
|
sata_setting, 1);
|
|
if (err_mask)
|
|
return;
|
|
|
|
dev->flags |= ATA_DFLAG_DEVSLP;
|
|
for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
|
|
j = ATA_LOG_DEVSLP_OFFSET + i;
|
|
dev->devslp_timing[i] = sata_setting[j];
|
|
}
|
|
}
|
|
|
|
static void ata_dev_config_cpr(struct ata_device *dev)
|
|
{
|
|
unsigned int err_mask;
|
|
size_t buf_len;
|
|
int i, nr_cpr = 0;
|
|
struct ata_cpr_log *cpr_log = NULL;
|
|
u8 *desc, *buf = NULL;
|
|
|
|
if (!ata_identify_page_supported(dev,
|
|
ATA_LOG_CONCURRENT_POSITIONING_RANGES))
|
|
goto out;
|
|
|
|
/*
|
|
* Read IDENTIFY DEVICE data log, page 0x47
|
|
* (concurrent positioning ranges). We can have at most 255 32B range
|
|
* descriptors plus a 64B header.
|
|
*/
|
|
buf_len = (64 + 255 * 32 + 511) & ~511;
|
|
buf = kzalloc(buf_len, GFP_KERNEL);
|
|
if (!buf)
|
|
goto out;
|
|
|
|
err_mask = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE,
|
|
ATA_LOG_CONCURRENT_POSITIONING_RANGES,
|
|
buf, buf_len >> 9);
|
|
if (err_mask)
|
|
goto out;
|
|
|
|
nr_cpr = buf[0];
|
|
if (!nr_cpr)
|
|
goto out;
|
|
|
|
cpr_log = kzalloc(struct_size(cpr_log, cpr, nr_cpr), GFP_KERNEL);
|
|
if (!cpr_log)
|
|
goto out;
|
|
|
|
cpr_log->nr_cpr = nr_cpr;
|
|
desc = &buf[64];
|
|
for (i = 0; i < nr_cpr; i++, desc += 32) {
|
|
cpr_log->cpr[i].num = desc[0];
|
|
cpr_log->cpr[i].num_storage_elements = desc[1];
|
|
cpr_log->cpr[i].start_lba = get_unaligned_le64(&desc[8]);
|
|
cpr_log->cpr[i].num_lbas = get_unaligned_le64(&desc[16]);
|
|
}
|
|
|
|
out:
|
|
swap(dev->cpr_log, cpr_log);
|
|
kfree(cpr_log);
|
|
kfree(buf);
|
|
}
|
|
|
|
static void ata_dev_print_features(struct ata_device *dev)
|
|
{
|
|
if (!(dev->flags & ATA_DFLAG_FEATURES_MASK))
|
|
return;
|
|
|
|
ata_dev_info(dev,
|
|
"Features:%s%s%s%s%s%s\n",
|
|
dev->flags & ATA_DFLAG_TRUSTED ? " Trust" : "",
|
|
dev->flags & ATA_DFLAG_DA ? " Dev-Attention" : "",
|
|
dev->flags & ATA_DFLAG_DEVSLP ? " Dev-Sleep" : "",
|
|
dev->flags & ATA_DFLAG_NCQ_SEND_RECV ? " NCQ-sndrcv" : "",
|
|
dev->flags & ATA_DFLAG_NCQ_PRIO ? " NCQ-prio" : "",
|
|
dev->cpr_log ? " CPR" : "");
|
|
}
|
|
|
|
/**
|
|
* ata_dev_configure - Configure the specified ATA/ATAPI device
|
|
* @dev: Target device to configure
|
|
*
|
|
* Configure @dev according to @dev->id. Generic and low-level
|
|
* driver specific fixups are also applied.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise
|
|
*/
|
|
int ata_dev_configure(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
bool print_info = ata_dev_print_info(dev);
|
|
const u16 *id = dev->id;
|
|
unsigned long xfer_mask;
|
|
unsigned int err_mask;
|
|
char revbuf[7]; /* XYZ-99\0 */
|
|
char fwrevbuf[ATA_ID_FW_REV_LEN+1];
|
|
char modelbuf[ATA_ID_PROD_LEN+1];
|
|
int rc;
|
|
|
|
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
|
|
ata_dev_info(dev, "%s: ENTER/EXIT -- nodev\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (ata_msg_probe(ap))
|
|
ata_dev_dbg(dev, "%s: ENTER\n", __func__);
|
|
|
|
/* set horkage */
|
|
dev->horkage |= ata_dev_blacklisted(dev);
|
|
ata_force_horkage(dev);
|
|
|
|
if (dev->horkage & ATA_HORKAGE_DISABLE) {
|
|
ata_dev_info(dev, "unsupported device, disabling\n");
|
|
ata_dev_disable(dev);
|
|
return 0;
|
|
}
|
|
|
|
if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
|
|
dev->class == ATA_DEV_ATAPI) {
|
|
ata_dev_warn(dev, "WARNING: ATAPI is %s, device ignored\n",
|
|
atapi_enabled ? "not supported with this driver"
|
|
: "disabled");
|
|
ata_dev_disable(dev);
|
|
return 0;
|
|
}
|
|
|
|
rc = ata_do_link_spd_horkage(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */
|
|
if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) &&
|
|
(id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2)
|
|
dev->horkage |= ATA_HORKAGE_NOLPM;
|
|
|
|
if (ap->flags & ATA_FLAG_NO_LPM)
|
|
dev->horkage |= ATA_HORKAGE_NOLPM;
|
|
|
|
if (dev->horkage & ATA_HORKAGE_NOLPM) {
|
|
ata_dev_warn(dev, "LPM support broken, forcing max_power\n");
|
|
dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER;
|
|
}
|
|
|
|
/* let ACPI work its magic */
|
|
rc = ata_acpi_on_devcfg(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* massage HPA, do it early as it might change IDENTIFY data */
|
|
rc = ata_hpa_resize(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* print device capabilities */
|
|
if (ata_msg_probe(ap))
|
|
ata_dev_dbg(dev,
|
|
"%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
|
|
"85:%04x 86:%04x 87:%04x 88:%04x\n",
|
|
__func__,
|
|
id[49], id[82], id[83], id[84],
|
|
id[85], id[86], id[87], id[88]);
|
|
|
|
/* initialize to-be-configured parameters */
|
|
dev->flags &= ~ATA_DFLAG_CFG_MASK;
|
|
dev->max_sectors = 0;
|
|
dev->cdb_len = 0;
|
|
dev->n_sectors = 0;
|
|
dev->cylinders = 0;
|
|
dev->heads = 0;
|
|
dev->sectors = 0;
|
|
dev->multi_count = 0;
|
|
|
|
/*
|
|
* common ATA, ATAPI feature tests
|
|
*/
|
|
|
|
/* find max transfer mode; for printk only */
|
|
xfer_mask = ata_id_xfermask(id);
|
|
|
|
if (ata_msg_probe(ap))
|
|
ata_dump_id(id);
|
|
|
|
/* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
|
|
ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
|
|
sizeof(fwrevbuf));
|
|
|
|
ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
|
|
sizeof(modelbuf));
|
|
|
|
/* ATA-specific feature tests */
|
|
if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
|
|
if (ata_id_is_cfa(id)) {
|
|
/* CPRM may make this media unusable */
|
|
if (id[ATA_ID_CFA_KEY_MGMT] & 1)
|
|
ata_dev_warn(dev,
|
|
"supports DRM functions and may not be fully accessible\n");
|
|
snprintf(revbuf, 7, "CFA");
|
|
} else {
|
|
snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
|
|
/* Warn the user if the device has TPM extensions */
|
|
if (ata_id_has_tpm(id))
|
|
ata_dev_warn(dev,
|
|
"supports DRM functions and may not be fully accessible\n");
|
|
}
|
|
|
|
dev->n_sectors = ata_id_n_sectors(id);
|
|
|
|
/* get current R/W Multiple count setting */
|
|
if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) {
|
|
unsigned int max = dev->id[47] & 0xff;
|
|
unsigned int cnt = dev->id[59] & 0xff;
|
|
/* only recognize/allow powers of two here */
|
|
if (is_power_of_2(max) && is_power_of_2(cnt))
|
|
if (cnt <= max)
|
|
dev->multi_count = cnt;
|
|
}
|
|
|
|
/* print device info to dmesg */
|
|
if (ata_msg_drv(ap) && print_info)
|
|
ata_dev_info(dev, "%s: %s, %s, max %s\n",
|
|
revbuf, modelbuf, fwrevbuf,
|
|
ata_mode_string(xfer_mask));
|
|
|
|
if (ata_id_has_lba(id)) {
|
|
rc = ata_dev_config_lba(dev);
|
|
if (rc)
|
|
return rc;
|
|
} else {
|
|
ata_dev_config_chs(dev);
|
|
}
|
|
|
|
ata_dev_config_devslp(dev);
|
|
ata_dev_config_sense_reporting(dev);
|
|
ata_dev_config_zac(dev);
|
|
ata_dev_config_trusted(dev);
|
|
ata_dev_config_cpr(dev);
|
|
dev->cdb_len = 32;
|
|
|
|
if (ata_msg_drv(ap) && print_info)
|
|
ata_dev_print_features(dev);
|
|
}
|
|
|
|
/* ATAPI-specific feature tests */
|
|
else if (dev->class == ATA_DEV_ATAPI) {
|
|
const char *cdb_intr_string = "";
|
|
const char *atapi_an_string = "";
|
|
const char *dma_dir_string = "";
|
|
u32 sntf;
|
|
|
|
rc = atapi_cdb_len(id);
|
|
if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
|
|
if (ata_msg_warn(ap))
|
|
ata_dev_warn(dev, "unsupported CDB len\n");
|
|
rc = -EINVAL;
|
|
goto err_out_nosup;
|
|
}
|
|
dev->cdb_len = (unsigned int) rc;
|
|
|
|
/* Enable ATAPI AN if both the host and device have
|
|
* the support. If PMP is attached, SNTF is required
|
|
* to enable ATAPI AN to discern between PHY status
|
|
* changed notifications and ATAPI ANs.
|
|
*/
|
|
if (atapi_an &&
|
|
(ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
|
|
(!sata_pmp_attached(ap) ||
|
|
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
|
|
/* issue SET feature command to turn this on */
|
|
err_mask = ata_dev_set_feature(dev,
|
|
SETFEATURES_SATA_ENABLE, SATA_AN);
|
|
if (err_mask)
|
|
ata_dev_err(dev,
|
|
"failed to enable ATAPI AN (err_mask=0x%x)\n",
|
|
err_mask);
|
|
else {
|
|
dev->flags |= ATA_DFLAG_AN;
|
|
atapi_an_string = ", ATAPI AN";
|
|
}
|
|
}
|
|
|
|
if (ata_id_cdb_intr(dev->id)) {
|
|
dev->flags |= ATA_DFLAG_CDB_INTR;
|
|
cdb_intr_string = ", CDB intr";
|
|
}
|
|
|
|
if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) {
|
|
dev->flags |= ATA_DFLAG_DMADIR;
|
|
dma_dir_string = ", DMADIR";
|
|
}
|
|
|
|
if (ata_id_has_da(dev->id)) {
|
|
dev->flags |= ATA_DFLAG_DA;
|
|
zpodd_init(dev);
|
|
}
|
|
|
|
/* print device info to dmesg */
|
|
if (ata_msg_drv(ap) && print_info)
|
|
ata_dev_info(dev,
|
|
"ATAPI: %s, %s, max %s%s%s%s\n",
|
|
modelbuf, fwrevbuf,
|
|
ata_mode_string(xfer_mask),
|
|
cdb_intr_string, atapi_an_string,
|
|
dma_dir_string);
|
|
}
|
|
|
|
/* determine max_sectors */
|
|
dev->max_sectors = ATA_MAX_SECTORS;
|
|
if (dev->flags & ATA_DFLAG_LBA48)
|
|
dev->max_sectors = ATA_MAX_SECTORS_LBA48;
|
|
|
|
/* Limit PATA drive on SATA cable bridge transfers to udma5,
|
|
200 sectors */
|
|
if (ata_dev_knobble(dev)) {
|
|
if (ata_msg_drv(ap) && print_info)
|
|
ata_dev_info(dev, "applying bridge limits\n");
|
|
dev->udma_mask &= ATA_UDMA5;
|
|
dev->max_sectors = ATA_MAX_SECTORS;
|
|
}
|
|
|
|
if ((dev->class == ATA_DEV_ATAPI) &&
|
|
(atapi_command_packet_set(id) == TYPE_TAPE)) {
|
|
dev->max_sectors = ATA_MAX_SECTORS_TAPE;
|
|
dev->horkage |= ATA_HORKAGE_STUCK_ERR;
|
|
}
|
|
|
|
if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
|
|
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
|
|
dev->max_sectors);
|
|
|
|
if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024)
|
|
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024,
|
|
dev->max_sectors);
|
|
|
|
if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
|
|
dev->max_sectors = ATA_MAX_SECTORS_LBA48;
|
|
|
|
if (ap->ops->dev_config)
|
|
ap->ops->dev_config(dev);
|
|
|
|
if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
|
|
/* Let the user know. We don't want to disallow opens for
|
|
rescue purposes, or in case the vendor is just a blithering
|
|
idiot. Do this after the dev_config call as some controllers
|
|
with buggy firmware may want to avoid reporting false device
|
|
bugs */
|
|
|
|
if (print_info) {
|
|
ata_dev_warn(dev,
|
|
"Drive reports diagnostics failure. This may indicate a drive\n");
|
|
ata_dev_warn(dev,
|
|
"fault or invalid emulation. Contact drive vendor for information.\n");
|
|
}
|
|
}
|
|
|
|
if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
|
|
ata_dev_warn(dev, "WARNING: device requires firmware update to be fully functional\n");
|
|
ata_dev_warn(dev, " contact the vendor or visit http://ata.wiki.kernel.org\n");
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out_nosup:
|
|
if (ata_msg_probe(ap))
|
|
ata_dev_dbg(dev, "%s: EXIT, err\n", __func__);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_cable_40wire - return 40 wire cable type
|
|
* @ap: port
|
|
*
|
|
* Helper method for drivers which want to hardwire 40 wire cable
|
|
* detection.
|
|
*/
|
|
|
|
int ata_cable_40wire(struct ata_port *ap)
|
|
{
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_cable_40wire);
|
|
|
|
/**
|
|
* ata_cable_80wire - return 80 wire cable type
|
|
* @ap: port
|
|
*
|
|
* Helper method for drivers which want to hardwire 80 wire cable
|
|
* detection.
|
|
*/
|
|
|
|
int ata_cable_80wire(struct ata_port *ap)
|
|
{
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_cable_80wire);
|
|
|
|
/**
|
|
* ata_cable_unknown - return unknown PATA cable.
|
|
* @ap: port
|
|
*
|
|
* Helper method for drivers which have no PATA cable detection.
|
|
*/
|
|
|
|
int ata_cable_unknown(struct ata_port *ap)
|
|
{
|
|
return ATA_CBL_PATA_UNK;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_cable_unknown);
|
|
|
|
/**
|
|
* ata_cable_ignore - return ignored PATA cable.
|
|
* @ap: port
|
|
*
|
|
* Helper method for drivers which don't use cable type to limit
|
|
* transfer mode.
|
|
*/
|
|
int ata_cable_ignore(struct ata_port *ap)
|
|
{
|
|
return ATA_CBL_PATA_IGN;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_cable_ignore);
|
|
|
|
/**
|
|
* ata_cable_sata - return SATA cable type
|
|
* @ap: port
|
|
*
|
|
* Helper method for drivers which have SATA cables
|
|
*/
|
|
|
|
int ata_cable_sata(struct ata_port *ap)
|
|
{
|
|
return ATA_CBL_SATA;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_cable_sata);
|
|
|
|
/**
|
|
* ata_bus_probe - Reset and probe ATA bus
|
|
* @ap: Bus to probe
|
|
*
|
|
* Master ATA bus probing function. Initiates a hardware-dependent
|
|
* bus reset, then attempts to identify any devices found on
|
|
* the bus.
|
|
*
|
|
* LOCKING:
|
|
* PCI/etc. bus probe sem.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, negative errno otherwise.
|
|
*/
|
|
|
|
int ata_bus_probe(struct ata_port *ap)
|
|
{
|
|
unsigned int classes[ATA_MAX_DEVICES];
|
|
int tries[ATA_MAX_DEVICES];
|
|
int rc;
|
|
struct ata_device *dev;
|
|
|
|
ata_for_each_dev(dev, &ap->link, ALL)
|
|
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
|
|
|
|
retry:
|
|
ata_for_each_dev(dev, &ap->link, ALL) {
|
|
/* If we issue an SRST then an ATA drive (not ATAPI)
|
|
* may change configuration and be in PIO0 timing. If
|
|
* we do a hard reset (or are coming from power on)
|
|
* this is true for ATA or ATAPI. Until we've set a
|
|
* suitable controller mode we should not touch the
|
|
* bus as we may be talking too fast.
|
|
*/
|
|
dev->pio_mode = XFER_PIO_0;
|
|
dev->dma_mode = 0xff;
|
|
|
|
/* If the controller has a pio mode setup function
|
|
* then use it to set the chipset to rights. Don't
|
|
* touch the DMA setup as that will be dealt with when
|
|
* configuring devices.
|
|
*/
|
|
if (ap->ops->set_piomode)
|
|
ap->ops->set_piomode(ap, dev);
|
|
}
|
|
|
|
/* reset and determine device classes */
|
|
ap->ops->phy_reset(ap);
|
|
|
|
ata_for_each_dev(dev, &ap->link, ALL) {
|
|
if (dev->class != ATA_DEV_UNKNOWN)
|
|
classes[dev->devno] = dev->class;
|
|
else
|
|
classes[dev->devno] = ATA_DEV_NONE;
|
|
|
|
dev->class = ATA_DEV_UNKNOWN;
|
|
}
|
|
|
|
/* read IDENTIFY page and configure devices. We have to do the identify
|
|
specific sequence bass-ackwards so that PDIAG- is released by
|
|
the slave device */
|
|
|
|
ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
|
|
if (tries[dev->devno])
|
|
dev->class = classes[dev->devno];
|
|
|
|
if (!ata_dev_enabled(dev))
|
|
continue;
|
|
|
|
rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
|
|
dev->id);
|
|
if (rc)
|
|
goto fail;
|
|
}
|
|
|
|
/* Now ask for the cable type as PDIAG- should have been released */
|
|
if (ap->ops->cable_detect)
|
|
ap->cbl = ap->ops->cable_detect(ap);
|
|
|
|
/* We may have SATA bridge glue hiding here irrespective of
|
|
* the reported cable types and sensed types. When SATA
|
|
* drives indicate we have a bridge, we don't know which end
|
|
* of the link the bridge is which is a problem.
|
|
*/
|
|
ata_for_each_dev(dev, &ap->link, ENABLED)
|
|
if (ata_id_is_sata(dev->id))
|
|
ap->cbl = ATA_CBL_SATA;
|
|
|
|
/* After the identify sequence we can now set up the devices. We do
|
|
this in the normal order so that the user doesn't get confused */
|
|
|
|
ata_for_each_dev(dev, &ap->link, ENABLED) {
|
|
ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
|
|
rc = ata_dev_configure(dev);
|
|
ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
|
|
if (rc)
|
|
goto fail;
|
|
}
|
|
|
|
/* configure transfer mode */
|
|
rc = ata_set_mode(&ap->link, &dev);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
ata_for_each_dev(dev, &ap->link, ENABLED)
|
|
return 0;
|
|
|
|
return -ENODEV;
|
|
|
|
fail:
|
|
tries[dev->devno]--;
|
|
|
|
switch (rc) {
|
|
case -EINVAL:
|
|
/* eeek, something went very wrong, give up */
|
|
tries[dev->devno] = 0;
|
|
break;
|
|
|
|
case -ENODEV:
|
|
/* give it just one more chance */
|
|
tries[dev->devno] = min(tries[dev->devno], 1);
|
|
fallthrough;
|
|
case -EIO:
|
|
if (tries[dev->devno] == 1) {
|
|
/* This is the last chance, better to slow
|
|
* down than lose it.
|
|
*/
|
|
sata_down_spd_limit(&ap->link, 0);
|
|
ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
|
|
}
|
|
}
|
|
|
|
if (!tries[dev->devno])
|
|
ata_dev_disable(dev);
|
|
|
|
goto retry;
|
|
}
|
|
|
|
/**
|
|
* sata_print_link_status - Print SATA link status
|
|
* @link: SATA link to printk link status about
|
|
*
|
|
* This function prints link speed and status of a SATA link.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void sata_print_link_status(struct ata_link *link)
|
|
{
|
|
u32 sstatus, scontrol, tmp;
|
|
|
|
if (sata_scr_read(link, SCR_STATUS, &sstatus))
|
|
return;
|
|
sata_scr_read(link, SCR_CONTROL, &scontrol);
|
|
|
|
if (ata_phys_link_online(link)) {
|
|
tmp = (sstatus >> 4) & 0xf;
|
|
ata_link_info(link, "SATA link up %s (SStatus %X SControl %X)\n",
|
|
sata_spd_string(tmp), sstatus, scontrol);
|
|
} else {
|
|
ata_link_info(link, "SATA link down (SStatus %X SControl %X)\n",
|
|
sstatus, scontrol);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_dev_pair - return other device on cable
|
|
* @adev: device
|
|
*
|
|
* Obtain the other device on the same cable, or if none is
|
|
* present NULL is returned
|
|
*/
|
|
|
|
struct ata_device *ata_dev_pair(struct ata_device *adev)
|
|
{
|
|
struct ata_link *link = adev->link;
|
|
struct ata_device *pair = &link->device[1 - adev->devno];
|
|
if (!ata_dev_enabled(pair))
|
|
return NULL;
|
|
return pair;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_dev_pair);
|
|
|
|
/**
|
|
* sata_down_spd_limit - adjust SATA spd limit downward
|
|
* @link: Link to adjust SATA spd limit for
|
|
* @spd_limit: Additional limit
|
|
*
|
|
* Adjust SATA spd limit of @link downward. Note that this
|
|
* function only adjusts the limit. The change must be applied
|
|
* using sata_set_spd().
|
|
*
|
|
* If @spd_limit is non-zero, the speed is limited to equal to or
|
|
* lower than @spd_limit if such speed is supported. If
|
|
* @spd_limit is slower than any supported speed, only the lowest
|
|
* supported speed is allowed.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, negative errno on failure
|
|
*/
|
|
int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
|
|
{
|
|
u32 sstatus, spd, mask;
|
|
int rc, bit;
|
|
|
|
if (!sata_scr_valid(link))
|
|
return -EOPNOTSUPP;
|
|
|
|
/* If SCR can be read, use it to determine the current SPD.
|
|
* If not, use cached value in link->sata_spd.
|
|
*/
|
|
rc = sata_scr_read(link, SCR_STATUS, &sstatus);
|
|
if (rc == 0 && ata_sstatus_online(sstatus))
|
|
spd = (sstatus >> 4) & 0xf;
|
|
else
|
|
spd = link->sata_spd;
|
|
|
|
mask = link->sata_spd_limit;
|
|
if (mask <= 1)
|
|
return -EINVAL;
|
|
|
|
/* unconditionally mask off the highest bit */
|
|
bit = fls(mask) - 1;
|
|
mask &= ~(1 << bit);
|
|
|
|
/*
|
|
* Mask off all speeds higher than or equal to the current one. At
|
|
* this point, if current SPD is not available and we previously
|
|
* recorded the link speed from SStatus, the driver has already
|
|
* masked off the highest bit so mask should already be 1 or 0.
|
|
* Otherwise, we should not force 1.5Gbps on a link where we have
|
|
* not previously recorded speed from SStatus. Just return in this
|
|
* case.
|
|
*/
|
|
if (spd > 1)
|
|
mask &= (1 << (spd - 1)) - 1;
|
|
else
|
|
return -EINVAL;
|
|
|
|
/* were we already at the bottom? */
|
|
if (!mask)
|
|
return -EINVAL;
|
|
|
|
if (spd_limit) {
|
|
if (mask & ((1 << spd_limit) - 1))
|
|
mask &= (1 << spd_limit) - 1;
|
|
else {
|
|
bit = ffs(mask) - 1;
|
|
mask = 1 << bit;
|
|
}
|
|
}
|
|
|
|
link->sata_spd_limit = mask;
|
|
|
|
ata_link_warn(link, "limiting SATA link speed to %s\n",
|
|
sata_spd_string(fls(mask)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ATA_ACPI
|
|
/**
|
|
* ata_timing_cycle2mode - find xfer mode for the specified cycle duration
|
|
* @xfer_shift: ATA_SHIFT_* value for transfer type to examine.
|
|
* @cycle: cycle duration in ns
|
|
*
|
|
* Return matching xfer mode for @cycle. The returned mode is of
|
|
* the transfer type specified by @xfer_shift. If @cycle is too
|
|
* slow for @xfer_shift, 0xff is returned. If @cycle is faster
|
|
* than the fastest known mode, the fasted mode is returned.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* Matching xfer_mode, 0xff if no match found.
|
|
*/
|
|
u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
|
|
{
|
|
u8 base_mode = 0xff, last_mode = 0xff;
|
|
const struct ata_xfer_ent *ent;
|
|
const struct ata_timing *t;
|
|
|
|
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
|
|
if (ent->shift == xfer_shift)
|
|
base_mode = ent->base;
|
|
|
|
for (t = ata_timing_find_mode(base_mode);
|
|
t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) {
|
|
unsigned short this_cycle;
|
|
|
|
switch (xfer_shift) {
|
|
case ATA_SHIFT_PIO:
|
|
case ATA_SHIFT_MWDMA:
|
|
this_cycle = t->cycle;
|
|
break;
|
|
case ATA_SHIFT_UDMA:
|
|
this_cycle = t->udma;
|
|
break;
|
|
default:
|
|
return 0xff;
|
|
}
|
|
|
|
if (cycle > this_cycle)
|
|
break;
|
|
|
|
last_mode = t->mode;
|
|
}
|
|
|
|
return last_mode;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* ata_down_xfermask_limit - adjust dev xfer masks downward
|
|
* @dev: Device to adjust xfer masks
|
|
* @sel: ATA_DNXFER_* selector
|
|
*
|
|
* Adjust xfer masks of @dev downward. Note that this function
|
|
* does not apply the change. Invoking ata_set_mode() afterwards
|
|
* will apply the limit.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, negative errno on failure
|
|
*/
|
|
int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
|
|
{
|
|
char buf[32];
|
|
unsigned long orig_mask, xfer_mask;
|
|
unsigned long pio_mask, mwdma_mask, udma_mask;
|
|
int quiet, highbit;
|
|
|
|
quiet = !!(sel & ATA_DNXFER_QUIET);
|
|
sel &= ~ATA_DNXFER_QUIET;
|
|
|
|
xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
|
|
dev->mwdma_mask,
|
|
dev->udma_mask);
|
|
ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
|
|
|
|
switch (sel) {
|
|
case ATA_DNXFER_PIO:
|
|
highbit = fls(pio_mask) - 1;
|
|
pio_mask &= ~(1 << highbit);
|
|
break;
|
|
|
|
case ATA_DNXFER_DMA:
|
|
if (udma_mask) {
|
|
highbit = fls(udma_mask) - 1;
|
|
udma_mask &= ~(1 << highbit);
|
|
if (!udma_mask)
|
|
return -ENOENT;
|
|
} else if (mwdma_mask) {
|
|
highbit = fls(mwdma_mask) - 1;
|
|
mwdma_mask &= ~(1 << highbit);
|
|
if (!mwdma_mask)
|
|
return -ENOENT;
|
|
}
|
|
break;
|
|
|
|
case ATA_DNXFER_40C:
|
|
udma_mask &= ATA_UDMA_MASK_40C;
|
|
break;
|
|
|
|
case ATA_DNXFER_FORCE_PIO0:
|
|
pio_mask &= 1;
|
|
fallthrough;
|
|
case ATA_DNXFER_FORCE_PIO:
|
|
mwdma_mask = 0;
|
|
udma_mask = 0;
|
|
break;
|
|
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
|
|
|
|
if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
|
|
return -ENOENT;
|
|
|
|
if (!quiet) {
|
|
if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
|
|
snprintf(buf, sizeof(buf), "%s:%s",
|
|
ata_mode_string(xfer_mask),
|
|
ata_mode_string(xfer_mask & ATA_MASK_PIO));
|
|
else
|
|
snprintf(buf, sizeof(buf), "%s",
|
|
ata_mode_string(xfer_mask));
|
|
|
|
ata_dev_warn(dev, "limiting speed to %s\n", buf);
|
|
}
|
|
|
|
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
|
|
&dev->udma_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ata_dev_set_mode(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
struct ata_eh_context *ehc = &dev->link->eh_context;
|
|
const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
|
|
const char *dev_err_whine = "";
|
|
int ign_dev_err = 0;
|
|
unsigned int err_mask = 0;
|
|
int rc;
|
|
|
|
dev->flags &= ~ATA_DFLAG_PIO;
|
|
if (dev->xfer_shift == ATA_SHIFT_PIO)
|
|
dev->flags |= ATA_DFLAG_PIO;
|
|
|
|
if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
|
|
dev_err_whine = " (SET_XFERMODE skipped)";
|
|
else {
|
|
if (nosetxfer)
|
|
ata_dev_warn(dev,
|
|
"NOSETXFER but PATA detected - can't "
|
|
"skip SETXFER, might malfunction\n");
|
|
err_mask = ata_dev_set_xfermode(dev);
|
|
}
|
|
|
|
if (err_mask & ~AC_ERR_DEV)
|
|
goto fail;
|
|
|
|
/* revalidate */
|
|
ehc->i.flags |= ATA_EHI_POST_SETMODE;
|
|
rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0);
|
|
ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (dev->xfer_shift == ATA_SHIFT_PIO) {
|
|
/* Old CFA may refuse this command, which is just fine */
|
|
if (ata_id_is_cfa(dev->id))
|
|
ign_dev_err = 1;
|
|
/* Catch several broken garbage emulations plus some pre
|
|
ATA devices */
|
|
if (ata_id_major_version(dev->id) == 0 &&
|
|
dev->pio_mode <= XFER_PIO_2)
|
|
ign_dev_err = 1;
|
|
/* Some very old devices and some bad newer ones fail
|
|
any kind of SET_XFERMODE request but support PIO0-2
|
|
timings and no IORDY */
|
|
if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
|
|
ign_dev_err = 1;
|
|
}
|
|
/* Early MWDMA devices do DMA but don't allow DMA mode setting.
|
|
Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
|
|
if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
|
|
dev->dma_mode == XFER_MW_DMA_0 &&
|
|
(dev->id[63] >> 8) & 1)
|
|
ign_dev_err = 1;
|
|
|
|
/* if the device is actually configured correctly, ignore dev err */
|
|
if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id)))
|
|
ign_dev_err = 1;
|
|
|
|
if (err_mask & AC_ERR_DEV) {
|
|
if (!ign_dev_err)
|
|
goto fail;
|
|
else
|
|
dev_err_whine = " (device error ignored)";
|
|
}
|
|
|
|
DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
|
|
dev->xfer_shift, (int)dev->xfer_mode);
|
|
|
|
if (!(ehc->i.flags & ATA_EHI_QUIET) ||
|
|
ehc->i.flags & ATA_EHI_DID_HARDRESET)
|
|
ata_dev_info(dev, "configured for %s%s\n",
|
|
ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)),
|
|
dev_err_whine);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
ata_dev_err(dev, "failed to set xfermode (err_mask=0x%x)\n", err_mask);
|
|
return -EIO;
|
|
}
|
|
|
|
/**
|
|
* ata_do_set_mode - Program timings and issue SET FEATURES - XFER
|
|
* @link: link on which timings will be programmed
|
|
* @r_failed_dev: out parameter for failed device
|
|
*
|
|
* Standard implementation of the function used to tune and set
|
|
* ATA device disk transfer mode (PIO3, UDMA6, etc.). If
|
|
* ata_dev_set_mode() fails, pointer to the failing device is
|
|
* returned in @r_failed_dev.
|
|
*
|
|
* LOCKING:
|
|
* PCI/etc. bus probe sem.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, negative errno otherwise
|
|
*/
|
|
|
|
int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ata_device *dev;
|
|
int rc = 0, used_dma = 0, found = 0;
|
|
|
|
/* step 1: calculate xfer_mask */
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
unsigned long pio_mask, dma_mask;
|
|
unsigned int mode_mask;
|
|
|
|
mode_mask = ATA_DMA_MASK_ATA;
|
|
if (dev->class == ATA_DEV_ATAPI)
|
|
mode_mask = ATA_DMA_MASK_ATAPI;
|
|
else if (ata_id_is_cfa(dev->id))
|
|
mode_mask = ATA_DMA_MASK_CFA;
|
|
|
|
ata_dev_xfermask(dev);
|
|
ata_force_xfermask(dev);
|
|
|
|
pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
|
|
|
|
if (libata_dma_mask & mode_mask)
|
|
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask,
|
|
dev->udma_mask);
|
|
else
|
|
dma_mask = 0;
|
|
|
|
dev->pio_mode = ata_xfer_mask2mode(pio_mask);
|
|
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
|
|
|
|
found = 1;
|
|
if (ata_dma_enabled(dev))
|
|
used_dma = 1;
|
|
}
|
|
if (!found)
|
|
goto out;
|
|
|
|
/* step 2: always set host PIO timings */
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
if (dev->pio_mode == 0xff) {
|
|
ata_dev_warn(dev, "no PIO support\n");
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
dev->xfer_mode = dev->pio_mode;
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
if (ap->ops->set_piomode)
|
|
ap->ops->set_piomode(ap, dev);
|
|
}
|
|
|
|
/* step 3: set host DMA timings */
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
if (!ata_dma_enabled(dev))
|
|
continue;
|
|
|
|
dev->xfer_mode = dev->dma_mode;
|
|
dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
|
|
if (ap->ops->set_dmamode)
|
|
ap->ops->set_dmamode(ap, dev);
|
|
}
|
|
|
|
/* step 4: update devices' xfer mode */
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
rc = ata_dev_set_mode(dev);
|
|
if (rc)
|
|
goto out;
|
|
}
|
|
|
|
/* Record simplex status. If we selected DMA then the other
|
|
* host channels are not permitted to do so.
|
|
*/
|
|
if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
|
|
ap->host->simplex_claimed = ap;
|
|
|
|
out:
|
|
if (rc)
|
|
*r_failed_dev = dev;
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_do_set_mode);
|
|
|
|
/**
|
|
* ata_wait_ready - wait for link to become ready
|
|
* @link: link to be waited on
|
|
* @deadline: deadline jiffies for the operation
|
|
* @check_ready: callback to check link readiness
|
|
*
|
|
* Wait for @link to become ready. @check_ready should return
|
|
* positive number if @link is ready, 0 if it isn't, -ENODEV if
|
|
* link doesn't seem to be occupied, other errno for other error
|
|
* conditions.
|
|
*
|
|
* Transient -ENODEV conditions are allowed for
|
|
* ATA_TMOUT_FF_WAIT.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 if @link is ready before @deadline; otherwise, -errno.
|
|
*/
|
|
int ata_wait_ready(struct ata_link *link, unsigned long deadline,
|
|
int (*check_ready)(struct ata_link *link))
|
|
{
|
|
unsigned long start = jiffies;
|
|
unsigned long nodev_deadline;
|
|
int warned = 0;
|
|
|
|
/* choose which 0xff timeout to use, read comment in libata.h */
|
|
if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN)
|
|
nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG);
|
|
else
|
|
nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
|
|
|
|
/* Slave readiness can't be tested separately from master. On
|
|
* M/S emulation configuration, this function should be called
|
|
* only on the master and it will handle both master and slave.
|
|
*/
|
|
WARN_ON(link == link->ap->slave_link);
|
|
|
|
if (time_after(nodev_deadline, deadline))
|
|
nodev_deadline = deadline;
|
|
|
|
while (1) {
|
|
unsigned long now = jiffies;
|
|
int ready, tmp;
|
|
|
|
ready = tmp = check_ready(link);
|
|
if (ready > 0)
|
|
return 0;
|
|
|
|
/*
|
|
* -ENODEV could be transient. Ignore -ENODEV if link
|
|
* is online. Also, some SATA devices take a long
|
|
* time to clear 0xff after reset. Wait for
|
|
* ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't
|
|
* offline.
|
|
*
|
|
* Note that some PATA controllers (pata_ali) explode
|
|
* if status register is read more than once when
|
|
* there's no device attached.
|
|
*/
|
|
if (ready == -ENODEV) {
|
|
if (ata_link_online(link))
|
|
ready = 0;
|
|
else if ((link->ap->flags & ATA_FLAG_SATA) &&
|
|
!ata_link_offline(link) &&
|
|
time_before(now, nodev_deadline))
|
|
ready = 0;
|
|
}
|
|
|
|
if (ready)
|
|
return ready;
|
|
if (time_after(now, deadline))
|
|
return -EBUSY;
|
|
|
|
if (!warned && time_after(now, start + 5 * HZ) &&
|
|
(deadline - now > 3 * HZ)) {
|
|
ata_link_warn(link,
|
|
"link is slow to respond, please be patient "
|
|
"(ready=%d)\n", tmp);
|
|
warned = 1;
|
|
}
|
|
|
|
ata_msleep(link->ap, 50);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_wait_after_reset - wait for link to become ready after reset
|
|
* @link: link to be waited on
|
|
* @deadline: deadline jiffies for the operation
|
|
* @check_ready: callback to check link readiness
|
|
*
|
|
* Wait for @link to become ready after reset.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 if @link is ready before @deadline; otherwise, -errno.
|
|
*/
|
|
int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
|
|
int (*check_ready)(struct ata_link *link))
|
|
{
|
|
ata_msleep(link->ap, ATA_WAIT_AFTER_RESET);
|
|
|
|
return ata_wait_ready(link, deadline, check_ready);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_wait_after_reset);
|
|
|
|
/**
|
|
* ata_std_prereset - prepare for reset
|
|
* @link: ATA link to be reset
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* @link is about to be reset. Initialize it. Failure from
|
|
* prereset makes libata abort whole reset sequence and give up
|
|
* that port, so prereset should be best-effort. It does its
|
|
* best to prepare for reset sequence but if things go wrong, it
|
|
* should just whine, not fail.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
int ata_std_prereset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ata_eh_context *ehc = &link->eh_context;
|
|
const unsigned long *timing = sata_ehc_deb_timing(ehc);
|
|
int rc;
|
|
|
|
/* if we're about to do hardreset, nothing more to do */
|
|
if (ehc->i.action & ATA_EH_HARDRESET)
|
|
return 0;
|
|
|
|
/* if SATA, resume link */
|
|
if (ap->flags & ATA_FLAG_SATA) {
|
|
rc = sata_link_resume(link, timing, deadline);
|
|
/* whine about phy resume failure but proceed */
|
|
if (rc && rc != -EOPNOTSUPP)
|
|
ata_link_warn(link,
|
|
"failed to resume link for reset (errno=%d)\n",
|
|
rc);
|
|
}
|
|
|
|
/* no point in trying softreset on offline link */
|
|
if (ata_phys_link_offline(link))
|
|
ehc->i.action &= ~ATA_EH_SOFTRESET;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_std_prereset);
|
|
|
|
/**
|
|
* sata_std_hardreset - COMRESET w/o waiting or classification
|
|
* @link: link to reset
|
|
* @class: resulting class of attached device
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Standard SATA COMRESET w/o waiting or classification.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 if link offline, -EAGAIN if link online, -errno on errors.
|
|
*/
|
|
int sata_std_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
|
|
bool online;
|
|
int rc;
|
|
|
|
/* do hardreset */
|
|
rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
|
|
return online ? -EAGAIN : rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(sata_std_hardreset);
|
|
|
|
/**
|
|
* ata_std_postreset - standard postreset callback
|
|
* @link: the target ata_link
|
|
* @classes: classes of attached devices
|
|
*
|
|
* This function is invoked after a successful reset. Note that
|
|
* the device might have been reset more than once using
|
|
* different reset methods before postreset is invoked.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*/
|
|
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
|
|
{
|
|
u32 serror;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* reset complete, clear SError */
|
|
if (!sata_scr_read(link, SCR_ERROR, &serror))
|
|
sata_scr_write(link, SCR_ERROR, serror);
|
|
|
|
/* print link status */
|
|
sata_print_link_status(link);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_std_postreset);
|
|
|
|
/**
|
|
* ata_dev_same_device - Determine whether new ID matches configured device
|
|
* @dev: device to compare against
|
|
* @new_class: class of the new device
|
|
* @new_id: IDENTIFY page of the new device
|
|
*
|
|
* Compare @new_class and @new_id against @dev and determine
|
|
* whether @dev is the device indicated by @new_class and
|
|
* @new_id.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* 1 if @dev matches @new_class and @new_id, 0 otherwise.
|
|
*/
|
|
static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
|
|
const u16 *new_id)
|
|
{
|
|
const u16 *old_id = dev->id;
|
|
unsigned char model[2][ATA_ID_PROD_LEN + 1];
|
|
unsigned char serial[2][ATA_ID_SERNO_LEN + 1];
|
|
|
|
if (dev->class != new_class) {
|
|
ata_dev_info(dev, "class mismatch %d != %d\n",
|
|
dev->class, new_class);
|
|
return 0;
|
|
}
|
|
|
|
ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0]));
|
|
ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1]));
|
|
ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0]));
|
|
ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1]));
|
|
|
|
if (strcmp(model[0], model[1])) {
|
|
ata_dev_info(dev, "model number mismatch '%s' != '%s'\n",
|
|
model[0], model[1]);
|
|
return 0;
|
|
}
|
|
|
|
if (strcmp(serial[0], serial[1])) {
|
|
ata_dev_info(dev, "serial number mismatch '%s' != '%s'\n",
|
|
serial[0], serial[1]);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* ata_dev_reread_id - Re-read IDENTIFY data
|
|
* @dev: target ATA device
|
|
* @readid_flags: read ID flags
|
|
*
|
|
* Re-read IDENTIFY page and make sure @dev is still attached to
|
|
* the port.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, negative errno otherwise
|
|
*/
|
|
int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
|
|
{
|
|
unsigned int class = dev->class;
|
|
u16 *id = (void *)dev->link->ap->sector_buf;
|
|
int rc;
|
|
|
|
/* read ID data */
|
|
rc = ata_dev_read_id(dev, &class, readid_flags, id);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* is the device still there? */
|
|
if (!ata_dev_same_device(dev, class, id))
|
|
return -ENODEV;
|
|
|
|
memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_dev_revalidate - Revalidate ATA device
|
|
* @dev: device to revalidate
|
|
* @new_class: new class code
|
|
* @readid_flags: read ID flags
|
|
*
|
|
* Re-read IDENTIFY page, make sure @dev is still attached to the
|
|
* port and reconfigure it according to the new IDENTIFY page.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, negative errno otherwise
|
|
*/
|
|
int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
|
|
unsigned int readid_flags)
|
|
{
|
|
u64 n_sectors = dev->n_sectors;
|
|
u64 n_native_sectors = dev->n_native_sectors;
|
|
int rc;
|
|
|
|
if (!ata_dev_enabled(dev))
|
|
return -ENODEV;
|
|
|
|
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
|
|
if (ata_class_enabled(new_class) &&
|
|
new_class != ATA_DEV_ATA &&
|
|
new_class != ATA_DEV_ATAPI &&
|
|
new_class != ATA_DEV_ZAC &&
|
|
new_class != ATA_DEV_SEMB) {
|
|
ata_dev_info(dev, "class mismatch %u != %u\n",
|
|
dev->class, new_class);
|
|
rc = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
/* re-read ID */
|
|
rc = ata_dev_reread_id(dev, readid_flags);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
/* configure device according to the new ID */
|
|
rc = ata_dev_configure(dev);
|
|
if (rc)
|
|
goto fail;
|
|
|
|
/* verify n_sectors hasn't changed */
|
|
if (dev->class != ATA_DEV_ATA || !n_sectors ||
|
|
dev->n_sectors == n_sectors)
|
|
return 0;
|
|
|
|
/* n_sectors has changed */
|
|
ata_dev_warn(dev, "n_sectors mismatch %llu != %llu\n",
|
|
(unsigned long long)n_sectors,
|
|
(unsigned long long)dev->n_sectors);
|
|
|
|
/*
|
|
* Something could have caused HPA to be unlocked
|
|
* involuntarily. If n_native_sectors hasn't changed and the
|
|
* new size matches it, keep the device.
|
|
*/
|
|
if (dev->n_native_sectors == n_native_sectors &&
|
|
dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
|
|
ata_dev_warn(dev,
|
|
"new n_sectors matches native, probably "
|
|
"late HPA unlock, n_sectors updated\n");
|
|
/* use the larger n_sectors */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some BIOSes boot w/o HPA but resume w/ HPA locked. Try
|
|
* unlocking HPA in those cases.
|
|
*
|
|
* https://bugzilla.kernel.org/show_bug.cgi?id=15396
|
|
*/
|
|
if (dev->n_native_sectors == n_native_sectors &&
|
|
dev->n_sectors < n_sectors && n_sectors == n_native_sectors &&
|
|
!(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) {
|
|
ata_dev_warn(dev,
|
|
"old n_sectors matches native, probably "
|
|
"late HPA lock, will try to unlock HPA\n");
|
|
/* try unlocking HPA */
|
|
dev->flags |= ATA_DFLAG_UNLOCK_HPA;
|
|
rc = -EIO;
|
|
} else
|
|
rc = -ENODEV;
|
|
|
|
/* restore original n_[native_]sectors and fail */
|
|
dev->n_native_sectors = n_native_sectors;
|
|
dev->n_sectors = n_sectors;
|
|
fail:
|
|
ata_dev_err(dev, "revalidation failed (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
struct ata_blacklist_entry {
|
|
const char *model_num;
|
|
const char *model_rev;
|
|
unsigned long horkage;
|
|
};
|
|
|
|
static const struct ata_blacklist_entry ata_device_blacklist [] = {
|
|
/* Devices with DMA related problems under Linux */
|
|
{ "WDC AC11000H", NULL, ATA_HORKAGE_NODMA },
|
|
{ "WDC AC22100H", NULL, ATA_HORKAGE_NODMA },
|
|
{ "WDC AC32500H", NULL, ATA_HORKAGE_NODMA },
|
|
{ "WDC AC33100H", NULL, ATA_HORKAGE_NODMA },
|
|
{ "WDC AC31600H", NULL, ATA_HORKAGE_NODMA },
|
|
{ "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA },
|
|
{ "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA },
|
|
{ "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA },
|
|
{ "CRD-8400B", NULL, ATA_HORKAGE_NODMA },
|
|
{ "CRD-848[02]B", NULL, ATA_HORKAGE_NODMA },
|
|
{ "CRD-84", NULL, ATA_HORKAGE_NODMA },
|
|
{ "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA },
|
|
{ "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
|
|
{ "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA },
|
|
{ "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA },
|
|
{ "HITACHI CDR-8[34]35",NULL, ATA_HORKAGE_NODMA },
|
|
{ "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA },
|
|
{ "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA },
|
|
{ "CD-532E-A", NULL, ATA_HORKAGE_NODMA },
|
|
{ "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA },
|
|
{ "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA },
|
|
{ "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
|
|
{ "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
|
|
{ "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA },
|
|
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
|
|
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
|
|
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
|
|
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
|
|
{ " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA },
|
|
{ "VRFDFC22048UCHC-TE*", NULL, ATA_HORKAGE_NODMA },
|
|
/* Odd clown on sil3726/4726 PMPs */
|
|
{ "Config Disk", NULL, ATA_HORKAGE_DISABLE },
|
|
|
|
/* Weird ATAPI devices */
|
|
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
|
|
{ "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
|
|
{ "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 },
|
|
{ "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 },
|
|
|
|
/*
|
|
* Causes silent data corruption with higher max sects.
|
|
* http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com
|
|
*/
|
|
{ "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 },
|
|
|
|
/*
|
|
* These devices time out with higher max sects.
|
|
* https://bugzilla.kernel.org/show_bug.cgi?id=121671
|
|
*/
|
|
{ "LITEON CX1-JB*-HP", NULL, ATA_HORKAGE_MAX_SEC_1024 },
|
|
{ "LITEON EP1-*", NULL, ATA_HORKAGE_MAX_SEC_1024 },
|
|
|
|
/* Devices we expect to fail diagnostics */
|
|
|
|
/* Devices where NCQ should be avoided */
|
|
/* NCQ is slow */
|
|
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
|
|
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
|
|
/* http://thread.gmane.org/gmane.linux.ide/14907 */
|
|
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
|
|
/* NCQ is broken */
|
|
{ "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ },
|
|
{ "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
|
|
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
|
|
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
|
|
{ "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ },
|
|
|
|
/* Seagate NCQ + FLUSH CACHE firmware bug */
|
|
{ "ST31500341AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
|
|
ATA_HORKAGE_FIRMWARE_WARN },
|
|
|
|
{ "ST31000333AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
|
|
ATA_HORKAGE_FIRMWARE_WARN },
|
|
|
|
{ "ST3640[36]23AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
|
|
ATA_HORKAGE_FIRMWARE_WARN },
|
|
|
|
{ "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
|
|
ATA_HORKAGE_FIRMWARE_WARN },
|
|
|
|
/* drives which fail FPDMA_AA activation (some may freeze afterwards)
|
|
the ST disks also have LPM issues */
|
|
{ "ST1000LM024 HN-M101MBB", NULL, ATA_HORKAGE_BROKEN_FPDMA_AA |
|
|
ATA_HORKAGE_NOLPM, },
|
|
{ "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA },
|
|
|
|
/* Blacklist entries taken from Silicon Image 3124/3132
|
|
Windows driver .inf file - also several Linux problem reports */
|
|
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
|
|
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
|
|
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
|
|
|
|
/* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
|
|
{ "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, },
|
|
|
|
/* Sandisk SD7/8/9s lock up hard on large trims */
|
|
{ "SanDisk SD[789]*", NULL, ATA_HORKAGE_MAX_TRIM_128M, },
|
|
|
|
/* devices which puke on READ_NATIVE_MAX */
|
|
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
|
|
{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
|
|
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
|
|
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
|
|
|
|
/* this one allows HPA unlocking but fails IOs on the area */
|
|
{ "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
|
|
|
|
/* Devices which report 1 sector over size HPA */
|
|
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
|
|
{ "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
|
|
{ "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, },
|
|
|
|
/* Devices which get the IVB wrong */
|
|
{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
|
|
/* Maybe we should just blacklist TSSTcorp... */
|
|
{ "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB, },
|
|
|
|
/* Devices that do not need bridging limits applied */
|
|
{ "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
|
|
{ "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, },
|
|
|
|
/* Devices which aren't very happy with higher link speeds */
|
|
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
|
|
{ "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS, },
|
|
|
|
/*
|
|
* Devices which choke on SETXFER. Applies only if both the
|
|
* device and controller are SATA.
|
|
*/
|
|
{ "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER },
|
|
{ "PIONEER DVD-RW DVRTD08A", NULL, ATA_HORKAGE_NOSETXFER },
|
|
{ "PIONEER DVD-RW DVR-215", NULL, ATA_HORKAGE_NOSETXFER },
|
|
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
|
|
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
|
|
|
|
/* Crucial BX100 SSD 500GB has broken LPM support */
|
|
{ "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM },
|
|
|
|
/* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
|
|
{ "Crucial_CT512MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM |
|
|
ATA_HORKAGE_NOLPM, },
|
|
/* 512GB MX100 with newer firmware has only LPM issues */
|
|
{ "Crucial_CT512MX100*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM |
|
|
ATA_HORKAGE_NOLPM, },
|
|
|
|
/* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
|
|
{ "Crucial_CT480M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM |
|
|
ATA_HORKAGE_NOLPM, },
|
|
{ "Crucial_CT960M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM |
|
|
ATA_HORKAGE_NOLPM, },
|
|
|
|
/* These specific Samsung models/firmware-revs do not handle LPM well */
|
|
{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
|
|
{ "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, },
|
|
{ "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM, },
|
|
{ "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM, },
|
|
|
|
/* devices that don't properly handle queued TRIM commands */
|
|
{ "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Samsung SSD 840*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Samsung SSD 860*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM |
|
|
ATA_HORKAGE_NO_NCQ_ON_ATI, },
|
|
{ "Samsung SSD 870*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM |
|
|
ATA_HORKAGE_NO_NCQ_ON_ATI, },
|
|
{ "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
|
|
ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
|
|
/* devices that don't properly handle TRIM commands */
|
|
{ "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, },
|
|
|
|
/*
|
|
* As defined, the DRAT (Deterministic Read After Trim) and RZAT
|
|
* (Return Zero After Trim) flags in the ATA Command Set are
|
|
* unreliable in the sense that they only define what happens if
|
|
* the device successfully executed the DSM TRIM command. TRIM
|
|
* is only advisory, however, and the device is free to silently
|
|
* ignore all or parts of the request.
|
|
*
|
|
* Whitelist drives that are known to reliably return zeroes
|
|
* after TRIM.
|
|
*/
|
|
|
|
/*
|
|
* The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude
|
|
* that model before whitelisting all other intel SSDs.
|
|
*/
|
|
{ "INTEL*SSDSC2MH*", NULL, 0, },
|
|
|
|
{ "Micron*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Crucial*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "SAMSUNG*MZ7KM*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
{ "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
|
|
|
|
/*
|
|
* Some WD SATA-I drives spin up and down erratically when the link
|
|
* is put into the slumber mode. We don't have full list of the
|
|
* affected devices. Disable LPM if the device matches one of the
|
|
* known prefixes and is SATA-1. As a side effect LPM partial is
|
|
* lost too.
|
|
*
|
|
* https://bugzilla.kernel.org/show_bug.cgi?id=57211
|
|
*/
|
|
{ "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
|
|
{ "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
|
|
{ "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
|
|
{ "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
|
|
{ "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
|
|
{ "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
|
|
{ "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
|
|
|
|
/* End Marker */
|
|
{ }
|
|
};
|
|
|
|
static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
|
|
{
|
|
unsigned char model_num[ATA_ID_PROD_LEN + 1];
|
|
unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
|
|
const struct ata_blacklist_entry *ad = ata_device_blacklist;
|
|
|
|
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
|
|
ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev));
|
|
|
|
while (ad->model_num) {
|
|
if (glob_match(ad->model_num, model_num)) {
|
|
if (ad->model_rev == NULL)
|
|
return ad->horkage;
|
|
if (glob_match(ad->model_rev, model_rev))
|
|
return ad->horkage;
|
|
}
|
|
ad++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ata_dma_blacklisted(const struct ata_device *dev)
|
|
{
|
|
/* We don't support polling DMA.
|
|
* DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
|
|
* if the LLDD handles only interrupts in the HSM_ST_LAST state.
|
|
*/
|
|
if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) &&
|
|
(dev->flags & ATA_DFLAG_CDB_INTR))
|
|
return 1;
|
|
return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
|
|
}
|
|
|
|
/**
|
|
* ata_is_40wire - check drive side detection
|
|
* @dev: device
|
|
*
|
|
* Perform drive side detection decoding, allowing for device vendors
|
|
* who can't follow the documentation.
|
|
*/
|
|
|
|
static int ata_is_40wire(struct ata_device *dev)
|
|
{
|
|
if (dev->horkage & ATA_HORKAGE_IVB)
|
|
return ata_drive_40wire_relaxed(dev->id);
|
|
return ata_drive_40wire(dev->id);
|
|
}
|
|
|
|
/**
|
|
* cable_is_40wire - 40/80/SATA decider
|
|
* @ap: port to consider
|
|
*
|
|
* This function encapsulates the policy for speed management
|
|
* in one place. At the moment we don't cache the result but
|
|
* there is a good case for setting ap->cbl to the result when
|
|
* we are called with unknown cables (and figuring out if it
|
|
* impacts hotplug at all).
|
|
*
|
|
* Return 1 if the cable appears to be 40 wire.
|
|
*/
|
|
|
|
static int cable_is_40wire(struct ata_port *ap)
|
|
{
|
|
struct ata_link *link;
|
|
struct ata_device *dev;
|
|
|
|
/* If the controller thinks we are 40 wire, we are. */
|
|
if (ap->cbl == ATA_CBL_PATA40)
|
|
return 1;
|
|
|
|
/* If the controller thinks we are 80 wire, we are. */
|
|
if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
|
|
return 0;
|
|
|
|
/* If the system is known to be 40 wire short cable (eg
|
|
* laptop), then we allow 80 wire modes even if the drive
|
|
* isn't sure.
|
|
*/
|
|
if (ap->cbl == ATA_CBL_PATA40_SHORT)
|
|
return 0;
|
|
|
|
/* If the controller doesn't know, we scan.
|
|
*
|
|
* Note: We look for all 40 wire detects at this point. Any
|
|
* 80 wire detect is taken to be 80 wire cable because
|
|
* - in many setups only the one drive (slave if present) will
|
|
* give a valid detect
|
|
* - if you have a non detect capable drive you don't want it
|
|
* to colour the choice
|
|
*/
|
|
ata_for_each_link(link, ap, EDGE) {
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
if (!ata_is_40wire(dev))
|
|
return 0;
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* ata_dev_xfermask - Compute supported xfermask of the given device
|
|
* @dev: Device to compute xfermask for
|
|
*
|
|
* Compute supported xfermask of @dev and store it in
|
|
* dev->*_mask. This function is responsible for applying all
|
|
* known limits including host controller limits, device
|
|
* blacklist, etc...
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ata_dev_xfermask(struct ata_device *dev)
|
|
{
|
|
struct ata_link *link = dev->link;
|
|
struct ata_port *ap = link->ap;
|
|
struct ata_host *host = ap->host;
|
|
unsigned long xfer_mask;
|
|
|
|
/* controller modes available */
|
|
xfer_mask = ata_pack_xfermask(ap->pio_mask,
|
|
ap->mwdma_mask, ap->udma_mask);
|
|
|
|
/* drive modes available */
|
|
xfer_mask &= ata_pack_xfermask(dev->pio_mask,
|
|
dev->mwdma_mask, dev->udma_mask);
|
|
xfer_mask &= ata_id_xfermask(dev->id);
|
|
|
|
/*
|
|
* CFA Advanced TrueIDE timings are not allowed on a shared
|
|
* cable
|
|
*/
|
|
if (ata_dev_pair(dev)) {
|
|
/* No PIO5 or PIO6 */
|
|
xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5));
|
|
/* No MWDMA3 or MWDMA 4 */
|
|
xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3));
|
|
}
|
|
|
|
if (ata_dma_blacklisted(dev)) {
|
|
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
|
|
ata_dev_warn(dev,
|
|
"device is on DMA blacklist, disabling DMA\n");
|
|
}
|
|
|
|
if ((host->flags & ATA_HOST_SIMPLEX) &&
|
|
host->simplex_claimed && host->simplex_claimed != ap) {
|
|
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
|
|
ata_dev_warn(dev,
|
|
"simplex DMA is claimed by other device, disabling DMA\n");
|
|
}
|
|
|
|
if (ap->flags & ATA_FLAG_NO_IORDY)
|
|
xfer_mask &= ata_pio_mask_no_iordy(dev);
|
|
|
|
if (ap->ops->mode_filter)
|
|
xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
|
|
|
|
/* Apply cable rule here. Don't apply it early because when
|
|
* we handle hot plug the cable type can itself change.
|
|
* Check this last so that we know if the transfer rate was
|
|
* solely limited by the cable.
|
|
* Unknown or 80 wire cables reported host side are checked
|
|
* drive side as well. Cases where we know a 40wire cable
|
|
* is used safely for 80 are not checked here.
|
|
*/
|
|
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
|
|
/* UDMA/44 or higher would be available */
|
|
if (cable_is_40wire(ap)) {
|
|
ata_dev_warn(dev,
|
|
"limited to UDMA/33 due to 40-wire cable\n");
|
|
xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
|
|
}
|
|
|
|
ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
|
|
&dev->mwdma_mask, &dev->udma_mask);
|
|
}
|
|
|
|
/**
|
|
* ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
|
|
* @dev: Device to which command will be sent
|
|
*
|
|
* Issue SET FEATURES - XFER MODE command to device @dev
|
|
* on port @ap.
|
|
*
|
|
* LOCKING:
|
|
* PCI/etc. bus probe sem.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, AC_ERR_* mask otherwise.
|
|
*/
|
|
|
|
static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
|
|
{
|
|
struct ata_taskfile tf;
|
|
unsigned int err_mask;
|
|
|
|
/* set up set-features taskfile */
|
|
DPRINTK("set features - xfer mode\n");
|
|
|
|
/* Some controllers and ATAPI devices show flaky interrupt
|
|
* behavior after setting xfer mode. Use polling instead.
|
|
*/
|
|
ata_tf_init(dev, &tf);
|
|
tf.command = ATA_CMD_SET_FEATURES;
|
|
tf.feature = SETFEATURES_XFER;
|
|
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING;
|
|
tf.protocol = ATA_PROT_NODATA;
|
|
/* If we are using IORDY we must send the mode setting command */
|
|
if (ata_pio_need_iordy(dev))
|
|
tf.nsect = dev->xfer_mode;
|
|
/* If the device has IORDY and the controller does not - turn it off */
|
|
else if (ata_id_has_iordy(dev->id))
|
|
tf.nsect = 0x01;
|
|
else /* In the ancient relic department - skip all of this */
|
|
return 0;
|
|
|
|
/* On some disks, this command causes spin-up, so we need longer timeout */
|
|
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
|
|
|
|
DPRINTK("EXIT, err_mask=%x\n", err_mask);
|
|
return err_mask;
|
|
}
|
|
|
|
/**
|
|
* ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
|
|
* @dev: Device to which command will be sent
|
|
* @enable: Whether to enable or disable the feature
|
|
* @feature: The sector count represents the feature to set
|
|
*
|
|
* Issue SET FEATURES - SATA FEATURES command to device @dev
|
|
* on port @ap with sector count
|
|
*
|
|
* LOCKING:
|
|
* PCI/etc. bus probe sem.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, AC_ERR_* mask otherwise.
|
|
*/
|
|
unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature)
|
|
{
|
|
struct ata_taskfile tf;
|
|
unsigned int err_mask;
|
|
unsigned long timeout = 0;
|
|
|
|
/* set up set-features taskfile */
|
|
DPRINTK("set features - SATA features\n");
|
|
|
|
ata_tf_init(dev, &tf);
|
|
tf.command = ATA_CMD_SET_FEATURES;
|
|
tf.feature = enable;
|
|
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
tf.protocol = ATA_PROT_NODATA;
|
|
tf.nsect = feature;
|
|
|
|
if (enable == SETFEATURES_SPINUP)
|
|
timeout = ata_probe_timeout ?
|
|
ata_probe_timeout * 1000 : SETFEATURES_SPINUP_TIMEOUT;
|
|
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, timeout);
|
|
|
|
DPRINTK("EXIT, err_mask=%x\n", err_mask);
|
|
return err_mask;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_dev_set_feature);
|
|
|
|
/**
|
|
* ata_dev_init_params - Issue INIT DEV PARAMS command
|
|
* @dev: Device to which command will be sent
|
|
* @heads: Number of heads (taskfile parameter)
|
|
* @sectors: Number of sectors (taskfile parameter)
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, AC_ERR_* mask otherwise.
|
|
*/
|
|
static unsigned int ata_dev_init_params(struct ata_device *dev,
|
|
u16 heads, u16 sectors)
|
|
{
|
|
struct ata_taskfile tf;
|
|
unsigned int err_mask;
|
|
|
|
/* Number of sectors per track 1-255. Number of heads 1-16 */
|
|
if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
|
|
return AC_ERR_INVALID;
|
|
|
|
/* set up init dev params taskfile */
|
|
DPRINTK("init dev params \n");
|
|
|
|
ata_tf_init(dev, &tf);
|
|
tf.command = ATA_CMD_INIT_DEV_PARAMS;
|
|
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
tf.protocol = ATA_PROT_NODATA;
|
|
tf.nsect = sectors;
|
|
tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
|
|
|
|
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
|
|
/* A clean abort indicates an original or just out of spec drive
|
|
and we should continue as we issue the setup based on the
|
|
drive reported working geometry */
|
|
if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
|
|
err_mask = 0;
|
|
|
|
DPRINTK("EXIT, err_mask=%x\n", err_mask);
|
|
return err_mask;
|
|
}
|
|
|
|
/**
|
|
* atapi_check_dma - Check whether ATAPI DMA can be supported
|
|
* @qc: Metadata associated with taskfile to check
|
|
*
|
|
* Allow low-level driver to filter ATA PACKET commands, returning
|
|
* a status indicating whether or not it is OK to use DMA for the
|
|
* supplied PACKET command.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS: 0 when ATAPI DMA can be used
|
|
* nonzero otherwise
|
|
*/
|
|
int atapi_check_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
|
|
* few ATAPI devices choke on such DMA requests.
|
|
*/
|
|
if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
|
|
unlikely(qc->nbytes & 15))
|
|
return 1;
|
|
|
|
if (ap->ops->check_atapi_dma)
|
|
return ap->ops->check_atapi_dma(qc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_std_qc_defer - Check whether a qc needs to be deferred
|
|
* @qc: ATA command in question
|
|
*
|
|
* Non-NCQ commands cannot run with any other command, NCQ or
|
|
* not. As upper layer only knows the queue depth, we are
|
|
* responsible for maintaining exclusion. This function checks
|
|
* whether a new command @qc can be issued.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* ATA_DEFER_* if deferring is needed, 0 otherwise.
|
|
*/
|
|
int ata_std_qc_defer(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_link *link = qc->dev->link;
|
|
|
|
if (ata_is_ncq(qc->tf.protocol)) {
|
|
if (!ata_tag_valid(link->active_tag))
|
|
return 0;
|
|
} else {
|
|
if (!ata_tag_valid(link->active_tag) && !link->sactive)
|
|
return 0;
|
|
}
|
|
|
|
return ATA_DEFER_LINK;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
|
|
|
|
enum ata_completion_errors ata_noop_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
return AC_ERR_OK;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
|
|
|
|
/**
|
|
* ata_sg_init - Associate command with scatter-gather table.
|
|
* @qc: Command to be associated
|
|
* @sg: Scatter-gather table.
|
|
* @n_elem: Number of elements in s/g table.
|
|
*
|
|
* Initialize the data-related elements of queued_cmd @qc
|
|
* to point to a scatter-gather table @sg, containing @n_elem
|
|
* elements.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
|
|
unsigned int n_elem)
|
|
{
|
|
qc->sg = sg;
|
|
qc->n_elem = n_elem;
|
|
qc->cursg = qc->sg;
|
|
}
|
|
|
|
#ifdef CONFIG_HAS_DMA
|
|
|
|
/**
|
|
* ata_sg_clean - Unmap DMA memory associated with command
|
|
* @qc: Command containing DMA memory to be released
|
|
*
|
|
* Unmap all mapped DMA memory associated with this command.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static void ata_sg_clean(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct scatterlist *sg = qc->sg;
|
|
int dir = qc->dma_dir;
|
|
|
|
WARN_ON_ONCE(sg == NULL);
|
|
|
|
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
|
|
|
|
if (qc->n_elem)
|
|
dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
|
|
|
|
qc->flags &= ~ATA_QCFLAG_DMAMAP;
|
|
qc->sg = NULL;
|
|
}
|
|
|
|
/**
|
|
* ata_sg_setup - DMA-map the scatter-gather table associated with a command.
|
|
* @qc: Command with scatter-gather table to be mapped.
|
|
*
|
|
* DMA-map the scatter-gather table associated with queued_cmd @qc.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, negative on error.
|
|
*
|
|
*/
|
|
static int ata_sg_setup(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int n_elem;
|
|
|
|
VPRINTK("ENTER, ata%u\n", ap->print_id);
|
|
|
|
n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
|
|
if (n_elem < 1)
|
|
return -1;
|
|
|
|
VPRINTK("%d sg elements mapped\n", n_elem);
|
|
qc->orig_n_elem = qc->n_elem;
|
|
qc->n_elem = n_elem;
|
|
qc->flags |= ATA_QCFLAG_DMAMAP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else /* !CONFIG_HAS_DMA */
|
|
|
|
static inline void ata_sg_clean(struct ata_queued_cmd *qc) {}
|
|
static inline int ata_sg_setup(struct ata_queued_cmd *qc) { return -1; }
|
|
|
|
#endif /* !CONFIG_HAS_DMA */
|
|
|
|
/**
|
|
* swap_buf_le16 - swap halves of 16-bit words in place
|
|
* @buf: Buffer to swap
|
|
* @buf_words: Number of 16-bit words in buffer.
|
|
*
|
|
* Swap halves of 16-bit words if needed to convert from
|
|
* little-endian byte order to native cpu byte order, or
|
|
* vice-versa.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
void swap_buf_le16(u16 *buf, unsigned int buf_words)
|
|
{
|
|
#ifdef __BIG_ENDIAN
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < buf_words; i++)
|
|
buf[i] = le16_to_cpu(buf[i]);
|
|
#endif /* __BIG_ENDIAN */
|
|
}
|
|
|
|
/**
|
|
* ata_qc_new_init - Request an available ATA command, and initialize it
|
|
* @dev: Device from whom we request an available command structure
|
|
* @tag: tag
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
|
|
struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
struct ata_queued_cmd *qc;
|
|
|
|
/* no command while frozen */
|
|
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
|
|
return NULL;
|
|
|
|
/* libsas case */
|
|
if (ap->flags & ATA_FLAG_SAS_HOST) {
|
|
tag = ata_sas_allocate_tag(ap);
|
|
if (tag < 0)
|
|
return NULL;
|
|
}
|
|
|
|
qc = __ata_qc_from_tag(ap, tag);
|
|
qc->tag = qc->hw_tag = tag;
|
|
qc->scsicmd = NULL;
|
|
qc->ap = ap;
|
|
qc->dev = dev;
|
|
|
|
ata_qc_reinit(qc);
|
|
|
|
return qc;
|
|
}
|
|
|
|
/**
|
|
* ata_qc_free - free unused ata_queued_cmd
|
|
* @qc: Command to complete
|
|
*
|
|
* Designed to free unused ata_queued_cmd object
|
|
* in case something prevents using it.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_qc_free(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap;
|
|
unsigned int tag;
|
|
|
|
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
|
|
ap = qc->ap;
|
|
|
|
qc->flags = 0;
|
|
tag = qc->tag;
|
|
if (ata_tag_valid(tag)) {
|
|
qc->tag = ATA_TAG_POISON;
|
|
if (ap->flags & ATA_FLAG_SAS_HOST)
|
|
ata_sas_free_tag(tag, ap);
|
|
}
|
|
}
|
|
|
|
void __ata_qc_complete(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap;
|
|
struct ata_link *link;
|
|
|
|
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
|
|
WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
|
|
ap = qc->ap;
|
|
link = qc->dev->link;
|
|
|
|
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
|
|
ata_sg_clean(qc);
|
|
|
|
/* command should be marked inactive atomically with qc completion */
|
|
if (ata_is_ncq(qc->tf.protocol)) {
|
|
link->sactive &= ~(1 << qc->hw_tag);
|
|
if (!link->sactive)
|
|
ap->nr_active_links--;
|
|
} else {
|
|
link->active_tag = ATA_TAG_POISON;
|
|
ap->nr_active_links--;
|
|
}
|
|
|
|
/* clear exclusive status */
|
|
if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL &&
|
|
ap->excl_link == link))
|
|
ap->excl_link = NULL;
|
|
|
|
/* atapi: mark qc as inactive to prevent the interrupt handler
|
|
* from completing the command twice later, before the error handler
|
|
* is called. (when rc != 0 and atapi request sense is needed)
|
|
*/
|
|
qc->flags &= ~ATA_QCFLAG_ACTIVE;
|
|
ap->qc_active &= ~(1ULL << qc->tag);
|
|
|
|
/* call completion callback */
|
|
qc->complete_fn(qc);
|
|
}
|
|
|
|
static void fill_result_tf(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
qc->result_tf.flags = qc->tf.flags;
|
|
ap->ops->qc_fill_rtf(qc);
|
|
}
|
|
|
|
static void ata_verify_xfer(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_device *dev = qc->dev;
|
|
|
|
if (!ata_is_data(qc->tf.protocol))
|
|
return;
|
|
|
|
if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
|
|
return;
|
|
|
|
dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER;
|
|
}
|
|
|
|
/**
|
|
* ata_qc_complete - Complete an active ATA command
|
|
* @qc: Command to complete
|
|
*
|
|
* Indicate to the mid and upper layers that an ATA command has
|
|
* completed, with either an ok or not-ok status.
|
|
*
|
|
* Refrain from calling this function multiple times when
|
|
* successfully completing multiple NCQ commands.
|
|
* ata_qc_complete_multiple() should be used instead, which will
|
|
* properly update IRQ expect state.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_qc_complete(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* Trigger the LED (if available) */
|
|
ledtrig_disk_activity(!!(qc->tf.flags & ATA_TFLAG_WRITE));
|
|
|
|
/* XXX: New EH and old EH use different mechanisms to
|
|
* synchronize EH with regular execution path.
|
|
*
|
|
* In new EH, a failed qc is marked with ATA_QCFLAG_FAILED.
|
|
* Normal execution path is responsible for not accessing a
|
|
* failed qc. libata core enforces the rule by returning NULL
|
|
* from ata_qc_from_tag() for failed qcs.
|
|
*
|
|
* Old EH depends on ata_qc_complete() nullifying completion
|
|
* requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does
|
|
* not synchronize with interrupt handler. Only PIO task is
|
|
* taken care of.
|
|
*/
|
|
if (ap->ops->error_handler) {
|
|
struct ata_device *dev = qc->dev;
|
|
struct ata_eh_info *ehi = &dev->link->eh_info;
|
|
|
|
if (unlikely(qc->err_mask))
|
|
qc->flags |= ATA_QCFLAG_FAILED;
|
|
|
|
/*
|
|
* Finish internal commands without any further processing
|
|
* and always with the result TF filled.
|
|
*/
|
|
if (unlikely(ata_tag_internal(qc->tag))) {
|
|
fill_result_tf(qc);
|
|
trace_ata_qc_complete_internal(qc);
|
|
__ata_qc_complete(qc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Non-internal qc has failed. Fill the result TF and
|
|
* summon EH.
|
|
*/
|
|
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
|
|
fill_result_tf(qc);
|
|
trace_ata_qc_complete_failed(qc);
|
|
ata_qc_schedule_eh(qc);
|
|
return;
|
|
}
|
|
|
|
WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
|
|
|
|
/* read result TF if requested */
|
|
if (qc->flags & ATA_QCFLAG_RESULT_TF)
|
|
fill_result_tf(qc);
|
|
|
|
trace_ata_qc_complete_done(qc);
|
|
/* Some commands need post-processing after successful
|
|
* completion.
|
|
*/
|
|
switch (qc->tf.command) {
|
|
case ATA_CMD_SET_FEATURES:
|
|
if (qc->tf.feature != SETFEATURES_WC_ON &&
|
|
qc->tf.feature != SETFEATURES_WC_OFF &&
|
|
qc->tf.feature != SETFEATURES_RA_ON &&
|
|
qc->tf.feature != SETFEATURES_RA_OFF)
|
|
break;
|
|
fallthrough;
|
|
case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
|
|
case ATA_CMD_SET_MULTI: /* multi_count changed */
|
|
/* revalidate device */
|
|
ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
|
|
ata_port_schedule_eh(ap);
|
|
break;
|
|
|
|
case ATA_CMD_SLEEP:
|
|
dev->flags |= ATA_DFLAG_SLEEPING;
|
|
break;
|
|
}
|
|
|
|
if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
|
|
ata_verify_xfer(qc);
|
|
|
|
__ata_qc_complete(qc);
|
|
} else {
|
|
if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
|
|
return;
|
|
|
|
/* read result TF if failed or requested */
|
|
if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
|
|
fill_result_tf(qc);
|
|
|
|
__ata_qc_complete(qc);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_qc_complete);
|
|
|
|
/**
|
|
* ata_qc_get_active - get bitmask of active qcs
|
|
* @ap: port in question
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Bitmask of active qcs
|
|
*/
|
|
u64 ata_qc_get_active(struct ata_port *ap)
|
|
{
|
|
u64 qc_active = ap->qc_active;
|
|
|
|
/* ATA_TAG_INTERNAL is sent to hw as tag 0 */
|
|
if (qc_active & (1ULL << ATA_TAG_INTERNAL)) {
|
|
qc_active |= (1 << 0);
|
|
qc_active &= ~(1ULL << ATA_TAG_INTERNAL);
|
|
}
|
|
|
|
return qc_active;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_qc_get_active);
|
|
|
|
/**
|
|
* ata_qc_issue - issue taskfile to device
|
|
* @qc: command to issue to device
|
|
*
|
|
* Prepare an ATA command to submission to device.
|
|
* This includes mapping the data into a DMA-able
|
|
* area, filling in the S/G table, and finally
|
|
* writing the taskfile to hardware, starting the command.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_link *link = qc->dev->link;
|
|
u8 prot = qc->tf.protocol;
|
|
|
|
/* Make sure only one non-NCQ command is outstanding. The
|
|
* check is skipped for old EH because it reuses active qc to
|
|
* request ATAPI sense.
|
|
*/
|
|
WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag));
|
|
|
|
if (ata_is_ncq(prot)) {
|
|
WARN_ON_ONCE(link->sactive & (1 << qc->hw_tag));
|
|
|
|
if (!link->sactive)
|
|
ap->nr_active_links++;
|
|
link->sactive |= 1 << qc->hw_tag;
|
|
} else {
|
|
WARN_ON_ONCE(link->sactive);
|
|
|
|
ap->nr_active_links++;
|
|
link->active_tag = qc->tag;
|
|
}
|
|
|
|
qc->flags |= ATA_QCFLAG_ACTIVE;
|
|
ap->qc_active |= 1ULL << qc->tag;
|
|
|
|
/*
|
|
* We guarantee to LLDs that they will have at least one
|
|
* non-zero sg if the command is a data command.
|
|
*/
|
|
if (ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes))
|
|
goto sys_err;
|
|
|
|
if (ata_is_dma(prot) || (ata_is_pio(prot) &&
|
|
(ap->flags & ATA_FLAG_PIO_DMA)))
|
|
if (ata_sg_setup(qc))
|
|
goto sys_err;
|
|
|
|
/* if device is sleeping, schedule reset and abort the link */
|
|
if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
|
|
link->eh_info.action |= ATA_EH_RESET;
|
|
ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
|
|
ata_link_abort(link);
|
|
return;
|
|
}
|
|
|
|
qc->err_mask |= ap->ops->qc_prep(qc);
|
|
if (unlikely(qc->err_mask))
|
|
goto err;
|
|
trace_ata_qc_issue(qc);
|
|
qc->err_mask |= ap->ops->qc_issue(qc);
|
|
if (unlikely(qc->err_mask))
|
|
goto err;
|
|
return;
|
|
|
|
sys_err:
|
|
qc->err_mask |= AC_ERR_SYSTEM;
|
|
err:
|
|
ata_qc_complete(qc);
|
|
}
|
|
|
|
/**
|
|
* ata_phys_link_online - test whether the given link is online
|
|
* @link: ATA link to test
|
|
*
|
|
* Test whether @link is online. Note that this function returns
|
|
* 0 if online status of @link cannot be obtained, so
|
|
* ata_link_online(link) != !ata_link_offline(link).
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* True if the port online status is available and online.
|
|
*/
|
|
bool ata_phys_link_online(struct ata_link *link)
|
|
{
|
|
u32 sstatus;
|
|
|
|
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
|
|
ata_sstatus_online(sstatus))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* ata_phys_link_offline - test whether the given link is offline
|
|
* @link: ATA link to test
|
|
*
|
|
* Test whether @link is offline. Note that this function
|
|
* returns 0 if offline status of @link cannot be obtained, so
|
|
* ata_link_online(link) != !ata_link_offline(link).
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* True if the port offline status is available and offline.
|
|
*/
|
|
bool ata_phys_link_offline(struct ata_link *link)
|
|
{
|
|
u32 sstatus;
|
|
|
|
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
|
|
!ata_sstatus_online(sstatus))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* ata_link_online - test whether the given link is online
|
|
* @link: ATA link to test
|
|
*
|
|
* Test whether @link is online. This is identical to
|
|
* ata_phys_link_online() when there's no slave link. When
|
|
* there's a slave link, this function should only be called on
|
|
* the master link and will return true if any of M/S links is
|
|
* online.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* True if the port online status is available and online.
|
|
*/
|
|
bool ata_link_online(struct ata_link *link)
|
|
{
|
|
struct ata_link *slave = link->ap->slave_link;
|
|
|
|
WARN_ON(link == slave); /* shouldn't be called on slave link */
|
|
|
|
return ata_phys_link_online(link) ||
|
|
(slave && ata_phys_link_online(slave));
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_link_online);
|
|
|
|
/**
|
|
* ata_link_offline - test whether the given link is offline
|
|
* @link: ATA link to test
|
|
*
|
|
* Test whether @link is offline. This is identical to
|
|
* ata_phys_link_offline() when there's no slave link. When
|
|
* there's a slave link, this function should only be called on
|
|
* the master link and will return true if both M/S links are
|
|
* offline.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* True if the port offline status is available and offline.
|
|
*/
|
|
bool ata_link_offline(struct ata_link *link)
|
|
{
|
|
struct ata_link *slave = link->ap->slave_link;
|
|
|
|
WARN_ON(link == slave); /* shouldn't be called on slave link */
|
|
|
|
return ata_phys_link_offline(link) &&
|
|
(!slave || ata_phys_link_offline(slave));
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_link_offline);
|
|
|
|
#ifdef CONFIG_PM
|
|
static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
|
|
unsigned int action, unsigned int ehi_flags,
|
|
bool async)
|
|
{
|
|
struct ata_link *link;
|
|
unsigned long flags;
|
|
|
|
/* Previous resume operation might still be in
|
|
* progress. Wait for PM_PENDING to clear.
|
|
*/
|
|
if (ap->pflags & ATA_PFLAG_PM_PENDING) {
|
|
ata_port_wait_eh(ap);
|
|
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
|
|
}
|
|
|
|
/* request PM ops to EH */
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
ap->pm_mesg = mesg;
|
|
ap->pflags |= ATA_PFLAG_PM_PENDING;
|
|
ata_for_each_link(link, ap, HOST_FIRST) {
|
|
link->eh_info.action |= action;
|
|
link->eh_info.flags |= ehi_flags;
|
|
}
|
|
|
|
ata_port_schedule_eh(ap);
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
if (!async) {
|
|
ata_port_wait_eh(ap);
|
|
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* On some hardware, device fails to respond after spun down for suspend. As
|
|
* the device won't be used before being resumed, we don't need to touch the
|
|
* device. Ask EH to skip the usual stuff and proceed directly to suspend.
|
|
*
|
|
* http://thread.gmane.org/gmane.linux.ide/46764
|
|
*/
|
|
static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET
|
|
| ATA_EHI_NO_AUTOPSY
|
|
| ATA_EHI_NO_RECOVERY;
|
|
|
|
static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false);
|
|
}
|
|
|
|
static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true);
|
|
}
|
|
|
|
static int ata_port_pm_suspend(struct device *dev)
|
|
{
|
|
struct ata_port *ap = to_ata_port(dev);
|
|
|
|
if (pm_runtime_suspended(dev))
|
|
return 0;
|
|
|
|
ata_port_suspend(ap, PMSG_SUSPEND);
|
|
return 0;
|
|
}
|
|
|
|
static int ata_port_pm_freeze(struct device *dev)
|
|
{
|
|
struct ata_port *ap = to_ata_port(dev);
|
|
|
|
if (pm_runtime_suspended(dev))
|
|
return 0;
|
|
|
|
ata_port_suspend(ap, PMSG_FREEZE);
|
|
return 0;
|
|
}
|
|
|
|
static int ata_port_pm_poweroff(struct device *dev)
|
|
{
|
|
ata_port_suspend(to_ata_port(dev), PMSG_HIBERNATE);
|
|
return 0;
|
|
}
|
|
|
|
static const unsigned int ata_port_resume_ehi = ATA_EHI_NO_AUTOPSY
|
|
| ATA_EHI_QUIET;
|
|
|
|
static void ata_port_resume(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, false);
|
|
}
|
|
|
|
static void ata_port_resume_async(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, true);
|
|
}
|
|
|
|
static int ata_port_pm_resume(struct device *dev)
|
|
{
|
|
ata_port_resume_async(to_ata_port(dev), PMSG_RESUME);
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* For ODDs, the upper layer will poll for media change every few seconds,
|
|
* which will make it enter and leave suspend state every few seconds. And
|
|
* as each suspend will cause a hard/soft reset, the gain of runtime suspend
|
|
* is very little and the ODD may malfunction after constantly being reset.
|
|
* So the idle callback here will not proceed to suspend if a non-ZPODD capable
|
|
* ODD is attached to the port.
|
|
*/
|
|
static int ata_port_runtime_idle(struct device *dev)
|
|
{
|
|
struct ata_port *ap = to_ata_port(dev);
|
|
struct ata_link *link;
|
|
struct ata_device *adev;
|
|
|
|
ata_for_each_link(link, ap, HOST_FIRST) {
|
|
ata_for_each_dev(adev, link, ENABLED)
|
|
if (adev->class == ATA_DEV_ATAPI &&
|
|
!zpodd_dev_enabled(adev))
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ata_port_runtime_suspend(struct device *dev)
|
|
{
|
|
ata_port_suspend(to_ata_port(dev), PMSG_AUTO_SUSPEND);
|
|
return 0;
|
|
}
|
|
|
|
static int ata_port_runtime_resume(struct device *dev)
|
|
{
|
|
ata_port_resume(to_ata_port(dev), PMSG_AUTO_RESUME);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops ata_port_pm_ops = {
|
|
.suspend = ata_port_pm_suspend,
|
|
.resume = ata_port_pm_resume,
|
|
.freeze = ata_port_pm_freeze,
|
|
.thaw = ata_port_pm_resume,
|
|
.poweroff = ata_port_pm_poweroff,
|
|
.restore = ata_port_pm_resume,
|
|
|
|
.runtime_suspend = ata_port_runtime_suspend,
|
|
.runtime_resume = ata_port_runtime_resume,
|
|
.runtime_idle = ata_port_runtime_idle,
|
|
};
|
|
|
|
/* sas ports don't participate in pm runtime management of ata_ports,
|
|
* and need to resume ata devices at the domain level, not the per-port
|
|
* level. sas suspend/resume is async to allow parallel port recovery
|
|
* since sas has multiple ata_port instances per Scsi_Host.
|
|
*/
|
|
void ata_sas_port_suspend(struct ata_port *ap)
|
|
{
|
|
ata_port_suspend_async(ap, PMSG_SUSPEND);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_port_suspend);
|
|
|
|
void ata_sas_port_resume(struct ata_port *ap)
|
|
{
|
|
ata_port_resume_async(ap, PMSG_RESUME);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_port_resume);
|
|
|
|
/**
|
|
* ata_host_suspend - suspend host
|
|
* @host: host to suspend
|
|
* @mesg: PM message
|
|
*
|
|
* Suspend @host. Actual operation is performed by port suspend.
|
|
*/
|
|
int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
|
|
{
|
|
host->dev->power.power_state = mesg;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_suspend);
|
|
|
|
/**
|
|
* ata_host_resume - resume host
|
|
* @host: host to resume
|
|
*
|
|
* Resume @host. Actual operation is performed by port resume.
|
|
*/
|
|
void ata_host_resume(struct ata_host *host)
|
|
{
|
|
host->dev->power.power_state = PMSG_ON;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_resume);
|
|
#endif
|
|
|
|
const struct device_type ata_port_type = {
|
|
.name = "ata_port",
|
|
#ifdef CONFIG_PM
|
|
.pm = &ata_port_pm_ops,
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* ata_dev_init - Initialize an ata_device structure
|
|
* @dev: Device structure to initialize
|
|
*
|
|
* Initialize @dev in preparation for probing.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
void ata_dev_init(struct ata_device *dev)
|
|
{
|
|
struct ata_link *link = ata_dev_phys_link(dev);
|
|
struct ata_port *ap = link->ap;
|
|
unsigned long flags;
|
|
|
|
/* SATA spd limit is bound to the attached device, reset together */
|
|
link->sata_spd_limit = link->hw_sata_spd_limit;
|
|
link->sata_spd = 0;
|
|
|
|
/* High bits of dev->flags are used to record warm plug
|
|
* requests which occur asynchronously. Synchronize using
|
|
* host lock.
|
|
*/
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
dev->flags &= ~ATA_DFLAG_INIT_MASK;
|
|
dev->horkage = 0;
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
|
|
ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
|
|
dev->pio_mask = UINT_MAX;
|
|
dev->mwdma_mask = UINT_MAX;
|
|
dev->udma_mask = UINT_MAX;
|
|
}
|
|
|
|
/**
|
|
* ata_link_init - Initialize an ata_link structure
|
|
* @ap: ATA port link is attached to
|
|
* @link: Link structure to initialize
|
|
* @pmp: Port multiplier port number
|
|
*
|
|
* Initialize @link.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*/
|
|
void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
|
|
{
|
|
int i;
|
|
|
|
/* clear everything except for devices */
|
|
memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0,
|
|
ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN);
|
|
|
|
link->ap = ap;
|
|
link->pmp = pmp;
|
|
link->active_tag = ATA_TAG_POISON;
|
|
link->hw_sata_spd_limit = UINT_MAX;
|
|
|
|
/* can't use iterator, ap isn't initialized yet */
|
|
for (i = 0; i < ATA_MAX_DEVICES; i++) {
|
|
struct ata_device *dev = &link->device[i];
|
|
|
|
dev->link = link;
|
|
dev->devno = dev - link->device;
|
|
#ifdef CONFIG_ATA_ACPI
|
|
dev->gtf_filter = ata_acpi_gtf_filter;
|
|
#endif
|
|
ata_dev_init(dev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sata_link_init_spd - Initialize link->sata_spd_limit
|
|
* @link: Link to configure sata_spd_limit for
|
|
*
|
|
* Initialize ``link->[hw_]sata_spd_limit`` to the currently
|
|
* configured value.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno on failure.
|
|
*/
|
|
int sata_link_init_spd(struct ata_link *link)
|
|
{
|
|
u8 spd;
|
|
int rc;
|
|
|
|
rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
|
|
if (rc)
|
|
return rc;
|
|
|
|
spd = (link->saved_scontrol >> 4) & 0xf;
|
|
if (spd)
|
|
link->hw_sata_spd_limit &= (1 << spd) - 1;
|
|
|
|
ata_force_link_limits(link);
|
|
|
|
link->sata_spd_limit = link->hw_sata_spd_limit;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_port_alloc - allocate and initialize basic ATA port resources
|
|
* @host: ATA host this allocated port belongs to
|
|
*
|
|
* Allocate and initialize basic ATA port resources.
|
|
*
|
|
* RETURNS:
|
|
* Allocate ATA port on success, NULL on failure.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*/
|
|
struct ata_port *ata_port_alloc(struct ata_host *host)
|
|
{
|
|
struct ata_port *ap;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
ap = kzalloc(sizeof(*ap), GFP_KERNEL);
|
|
if (!ap)
|
|
return NULL;
|
|
|
|
ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN;
|
|
ap->lock = &host->lock;
|
|
ap->print_id = -1;
|
|
ap->local_port_no = -1;
|
|
ap->host = host;
|
|
ap->dev = host->dev;
|
|
|
|
#if defined(ATA_VERBOSE_DEBUG)
|
|
/* turn on all debugging levels */
|
|
ap->msg_enable = 0x00FF;
|
|
#elif defined(ATA_DEBUG)
|
|
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR;
|
|
#else
|
|
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
|
|
#endif
|
|
|
|
mutex_init(&ap->scsi_scan_mutex);
|
|
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
|
|
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
|
|
INIT_LIST_HEAD(&ap->eh_done_q);
|
|
init_waitqueue_head(&ap->eh_wait_q);
|
|
init_completion(&ap->park_req_pending);
|
|
timer_setup(&ap->fastdrain_timer, ata_eh_fastdrain_timerfn,
|
|
TIMER_DEFERRABLE);
|
|
|
|
ap->cbl = ATA_CBL_NONE;
|
|
|
|
ata_link_init(ap, &ap->link, 0);
|
|
|
|
#ifdef ATA_IRQ_TRAP
|
|
ap->stats.unhandled_irq = 1;
|
|
ap->stats.idle_irq = 1;
|
|
#endif
|
|
ata_sff_port_init(ap);
|
|
|
|
return ap;
|
|
}
|
|
|
|
static void ata_devres_release(struct device *gendev, void *res)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(gendev);
|
|
int i;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (!ap)
|
|
continue;
|
|
|
|
if (ap->scsi_host)
|
|
scsi_host_put(ap->scsi_host);
|
|
|
|
}
|
|
|
|
dev_set_drvdata(gendev, NULL);
|
|
ata_host_put(host);
|
|
}
|
|
|
|
static void ata_host_release(struct kref *kref)
|
|
{
|
|
struct ata_host *host = container_of(kref, struct ata_host, kref);
|
|
int i;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
kfree(ap->pmp_link);
|
|
kfree(ap->slave_link);
|
|
kfree(ap);
|
|
host->ports[i] = NULL;
|
|
}
|
|
kfree(host);
|
|
}
|
|
|
|
void ata_host_get(struct ata_host *host)
|
|
{
|
|
kref_get(&host->kref);
|
|
}
|
|
|
|
void ata_host_put(struct ata_host *host)
|
|
{
|
|
kref_put(&host->kref, ata_host_release);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_put);
|
|
|
|
/**
|
|
* ata_host_alloc - allocate and init basic ATA host resources
|
|
* @dev: generic device this host is associated with
|
|
* @max_ports: maximum number of ATA ports associated with this host
|
|
*
|
|
* Allocate and initialize basic ATA host resources. LLD calls
|
|
* this function to allocate a host, initializes it fully and
|
|
* attaches it using ata_host_register().
|
|
*
|
|
* @max_ports ports are allocated and host->n_ports is
|
|
* initialized to @max_ports. The caller is allowed to decrease
|
|
* host->n_ports before calling ata_host_register(). The unused
|
|
* ports will be automatically freed on registration.
|
|
*
|
|
* RETURNS:
|
|
* Allocate ATA host on success, NULL on failure.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*/
|
|
struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
|
|
{
|
|
struct ata_host *host;
|
|
size_t sz;
|
|
int i;
|
|
void *dr;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* alloc a container for our list of ATA ports (buses) */
|
|
sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
|
|
host = kzalloc(sz, GFP_KERNEL);
|
|
if (!host)
|
|
return NULL;
|
|
|
|
if (!devres_open_group(dev, NULL, GFP_KERNEL))
|
|
goto err_free;
|
|
|
|
dr = devres_alloc(ata_devres_release, 0, GFP_KERNEL);
|
|
if (!dr)
|
|
goto err_out;
|
|
|
|
devres_add(dev, dr);
|
|
dev_set_drvdata(dev, host);
|
|
|
|
spin_lock_init(&host->lock);
|
|
mutex_init(&host->eh_mutex);
|
|
host->dev = dev;
|
|
host->n_ports = max_ports;
|
|
kref_init(&host->kref);
|
|
|
|
/* allocate ports bound to this host */
|
|
for (i = 0; i < max_ports; i++) {
|
|
struct ata_port *ap;
|
|
|
|
ap = ata_port_alloc(host);
|
|
if (!ap)
|
|
goto err_out;
|
|
|
|
ap->port_no = i;
|
|
host->ports[i] = ap;
|
|
}
|
|
|
|
devres_remove_group(dev, NULL);
|
|
return host;
|
|
|
|
err_out:
|
|
devres_release_group(dev, NULL);
|
|
err_free:
|
|
kfree(host);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_alloc);
|
|
|
|
/**
|
|
* ata_host_alloc_pinfo - alloc host and init with port_info array
|
|
* @dev: generic device this host is associated with
|
|
* @ppi: array of ATA port_info to initialize host with
|
|
* @n_ports: number of ATA ports attached to this host
|
|
*
|
|
* Allocate ATA host and initialize with info from @ppi. If NULL
|
|
* terminated, @ppi may contain fewer entries than @n_ports. The
|
|
* last entry will be used for the remaining ports.
|
|
*
|
|
* RETURNS:
|
|
* Allocate ATA host on success, NULL on failure.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*/
|
|
struct ata_host *ata_host_alloc_pinfo(struct device *dev,
|
|
const struct ata_port_info * const * ppi,
|
|
int n_ports)
|
|
{
|
|
const struct ata_port_info *pi;
|
|
struct ata_host *host;
|
|
int i, j;
|
|
|
|
host = ata_host_alloc(dev, n_ports);
|
|
if (!host)
|
|
return NULL;
|
|
|
|
for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (ppi[j])
|
|
pi = ppi[j++];
|
|
|
|
ap->pio_mask = pi->pio_mask;
|
|
ap->mwdma_mask = pi->mwdma_mask;
|
|
ap->udma_mask = pi->udma_mask;
|
|
ap->flags |= pi->flags;
|
|
ap->link.flags |= pi->link_flags;
|
|
ap->ops = pi->port_ops;
|
|
|
|
if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
|
|
host->ops = pi->port_ops;
|
|
}
|
|
|
|
return host;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
|
|
|
|
static void ata_host_stop(struct device *gendev, void *res)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(gendev);
|
|
int i;
|
|
|
|
WARN_ON(!(host->flags & ATA_HOST_STARTED));
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (ap->ops->port_stop)
|
|
ap->ops->port_stop(ap);
|
|
}
|
|
|
|
if (host->ops->host_stop)
|
|
host->ops->host_stop(host);
|
|
}
|
|
|
|
/**
|
|
* ata_finalize_port_ops - finalize ata_port_operations
|
|
* @ops: ata_port_operations to finalize
|
|
*
|
|
* An ata_port_operations can inherit from another ops and that
|
|
* ops can again inherit from another. This can go on as many
|
|
* times as necessary as long as there is no loop in the
|
|
* inheritance chain.
|
|
*
|
|
* Ops tables are finalized when the host is started. NULL or
|
|
* unspecified entries are inherited from the closet ancestor
|
|
* which has the method and the entry is populated with it.
|
|
* After finalization, the ops table directly points to all the
|
|
* methods and ->inherits is no longer necessary and cleared.
|
|
*
|
|
* Using ATA_OP_NULL, inheriting ops can force a method to NULL.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ata_finalize_port_ops(struct ata_port_operations *ops)
|
|
{
|
|
static DEFINE_SPINLOCK(lock);
|
|
const struct ata_port_operations *cur;
|
|
void **begin = (void **)ops;
|
|
void **end = (void **)&ops->inherits;
|
|
void **pp;
|
|
|
|
if (!ops || !ops->inherits)
|
|
return;
|
|
|
|
spin_lock(&lock);
|
|
|
|
for (cur = ops->inherits; cur; cur = cur->inherits) {
|
|
void **inherit = (void **)cur;
|
|
|
|
for (pp = begin; pp < end; pp++, inherit++)
|
|
if (!*pp)
|
|
*pp = *inherit;
|
|
}
|
|
|
|
for (pp = begin; pp < end; pp++)
|
|
if (IS_ERR(*pp))
|
|
*pp = NULL;
|
|
|
|
ops->inherits = NULL;
|
|
|
|
spin_unlock(&lock);
|
|
}
|
|
|
|
/**
|
|
* ata_host_start - start and freeze ports of an ATA host
|
|
* @host: ATA host to start ports for
|
|
*
|
|
* Start and then freeze ports of @host. Started status is
|
|
* recorded in host->flags, so this function can be called
|
|
* multiple times. Ports are guaranteed to get started only
|
|
* once. If host->ops isn't initialized yet, its set to the
|
|
* first non-dummy port ops.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 if all ports are started successfully, -errno otherwise.
|
|
*/
|
|
int ata_host_start(struct ata_host *host)
|
|
{
|
|
int have_stop = 0;
|
|
void *start_dr = NULL;
|
|
int i, rc;
|
|
|
|
if (host->flags & ATA_HOST_STARTED)
|
|
return 0;
|
|
|
|
ata_finalize_port_ops(host->ops);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
ata_finalize_port_ops(ap->ops);
|
|
|
|
if (!host->ops && !ata_port_is_dummy(ap))
|
|
host->ops = ap->ops;
|
|
|
|
if (ap->ops->port_stop)
|
|
have_stop = 1;
|
|
}
|
|
|
|
if (host->ops && host->ops->host_stop)
|
|
have_stop = 1;
|
|
|
|
if (have_stop) {
|
|
start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL);
|
|
if (!start_dr)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (ap->ops->port_start) {
|
|
rc = ap->ops->port_start(ap);
|
|
if (rc) {
|
|
if (rc != -ENODEV)
|
|
dev_err(host->dev,
|
|
"failed to start port %d (errno=%d)\n",
|
|
i, rc);
|
|
goto err_out;
|
|
}
|
|
}
|
|
ata_eh_freeze_port(ap);
|
|
}
|
|
|
|
if (start_dr)
|
|
devres_add(host->dev, start_dr);
|
|
host->flags |= ATA_HOST_STARTED;
|
|
return 0;
|
|
|
|
err_out:
|
|
while (--i >= 0) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (ap->ops->port_stop)
|
|
ap->ops->port_stop(ap);
|
|
}
|
|
devres_free(start_dr);
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_start);
|
|
|
|
/**
|
|
* ata_host_init - Initialize a host struct for sas (ipr, libsas)
|
|
* @host: host to initialize
|
|
* @dev: device host is attached to
|
|
* @ops: port_ops
|
|
*
|
|
*/
|
|
void ata_host_init(struct ata_host *host, struct device *dev,
|
|
struct ata_port_operations *ops)
|
|
{
|
|
spin_lock_init(&host->lock);
|
|
mutex_init(&host->eh_mutex);
|
|
host->n_tags = ATA_MAX_QUEUE;
|
|
host->dev = dev;
|
|
host->ops = ops;
|
|
kref_init(&host->kref);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_init);
|
|
|
|
void __ata_port_probe(struct ata_port *ap)
|
|
{
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
unsigned long flags;
|
|
|
|
/* kick EH for boot probing */
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
ehi->probe_mask |= ATA_ALL_DEVICES;
|
|
ehi->action |= ATA_EH_RESET;
|
|
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
|
|
|
|
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
|
|
ap->pflags |= ATA_PFLAG_LOADING;
|
|
ata_port_schedule_eh(ap);
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
}
|
|
|
|
int ata_port_probe(struct ata_port *ap)
|
|
{
|
|
int rc = 0;
|
|
|
|
if (ap->ops->error_handler) {
|
|
__ata_port_probe(ap);
|
|
ata_port_wait_eh(ap);
|
|
} else {
|
|
DPRINTK("ata%u: bus probe begin\n", ap->print_id);
|
|
rc = ata_bus_probe(ap);
|
|
DPRINTK("ata%u: bus probe end\n", ap->print_id);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void async_port_probe(void *data, async_cookie_t cookie)
|
|
{
|
|
struct ata_port *ap = data;
|
|
|
|
/*
|
|
* If we're not allowed to scan this host in parallel,
|
|
* we need to wait until all previous scans have completed
|
|
* before going further.
|
|
* Jeff Garzik says this is only within a controller, so we
|
|
* don't need to wait for port 0, only for later ports.
|
|
*/
|
|
if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
|
|
async_synchronize_cookie(cookie);
|
|
|
|
(void)ata_port_probe(ap);
|
|
|
|
/* in order to keep device order, we need to synchronize at this point */
|
|
async_synchronize_cookie(cookie);
|
|
|
|
ata_scsi_scan_host(ap, 1);
|
|
}
|
|
|
|
/**
|
|
* ata_host_register - register initialized ATA host
|
|
* @host: ATA host to register
|
|
* @sht: template for SCSI host
|
|
*
|
|
* Register initialized ATA host. @host is allocated using
|
|
* ata_host_alloc() and fully initialized by LLD. This function
|
|
* starts ports, registers @host with ATA and SCSI layers and
|
|
* probe registered devices.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
|
|
{
|
|
int i, rc;
|
|
|
|
host->n_tags = clamp(sht->can_queue, 1, ATA_MAX_QUEUE);
|
|
|
|
/* host must have been started */
|
|
if (!(host->flags & ATA_HOST_STARTED)) {
|
|
dev_err(host->dev, "BUG: trying to register unstarted host\n");
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Blow away unused ports. This happens when LLD can't
|
|
* determine the exact number of ports to allocate at
|
|
* allocation time.
|
|
*/
|
|
for (i = host->n_ports; host->ports[i]; i++)
|
|
kfree(host->ports[i]);
|
|
|
|
/* give ports names and add SCSI hosts */
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
|
|
host->ports[i]->local_port_no = i + 1;
|
|
}
|
|
|
|
/* Create associated sysfs transport objects */
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
rc = ata_tport_add(host->dev,host->ports[i]);
|
|
if (rc) {
|
|
goto err_tadd;
|
|
}
|
|
}
|
|
|
|
rc = ata_scsi_add_hosts(host, sht);
|
|
if (rc)
|
|
goto err_tadd;
|
|
|
|
/* set cable, sata_spd_limit and report */
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
unsigned long xfer_mask;
|
|
|
|
/* set SATA cable type if still unset */
|
|
if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA))
|
|
ap->cbl = ATA_CBL_SATA;
|
|
|
|
/* init sata_spd_limit to the current value */
|
|
sata_link_init_spd(&ap->link);
|
|
if (ap->slave_link)
|
|
sata_link_init_spd(ap->slave_link);
|
|
|
|
/* print per-port info to dmesg */
|
|
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
|
|
ap->udma_mask);
|
|
|
|
if (!ata_port_is_dummy(ap)) {
|
|
ata_port_info(ap, "%cATA max %s %s\n",
|
|
(ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
|
|
ata_mode_string(xfer_mask),
|
|
ap->link.eh_info.desc);
|
|
ata_ehi_clear_desc(&ap->link.eh_info);
|
|
} else
|
|
ata_port_info(ap, "DUMMY\n");
|
|
}
|
|
|
|
/* perform each probe asynchronously */
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
ap->cookie = async_schedule(async_port_probe, ap);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_tadd:
|
|
while (--i >= 0) {
|
|
ata_tport_delete(host->ports[i]);
|
|
}
|
|
return rc;
|
|
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_register);
|
|
|
|
/**
|
|
* ata_host_activate - start host, request IRQ and register it
|
|
* @host: target ATA host
|
|
* @irq: IRQ to request
|
|
* @irq_handler: irq_handler used when requesting IRQ
|
|
* @irq_flags: irq_flags used when requesting IRQ
|
|
* @sht: scsi_host_template to use when registering the host
|
|
*
|
|
* After allocating an ATA host and initializing it, most libata
|
|
* LLDs perform three steps to activate the host - start host,
|
|
* request IRQ and register it. This helper takes necessary
|
|
* arguments and performs the three steps in one go.
|
|
*
|
|
* An invalid IRQ skips the IRQ registration and expects the host to
|
|
* have set polling mode on the port. In this case, @irq_handler
|
|
* should be NULL.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
int ata_host_activate(struct ata_host *host, int irq,
|
|
irq_handler_t irq_handler, unsigned long irq_flags,
|
|
struct scsi_host_template *sht)
|
|
{
|
|
int i, rc;
|
|
char *irq_desc;
|
|
|
|
rc = ata_host_start(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Special case for polling mode */
|
|
if (!irq) {
|
|
WARN_ON(irq_handler);
|
|
return ata_host_register(host, sht);
|
|
}
|
|
|
|
irq_desc = devm_kasprintf(host->dev, GFP_KERNEL, "%s[%s]",
|
|
dev_driver_string(host->dev),
|
|
dev_name(host->dev));
|
|
if (!irq_desc)
|
|
return -ENOMEM;
|
|
|
|
rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
|
|
irq_desc, host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for (i = 0; i < host->n_ports; i++)
|
|
ata_port_desc(host->ports[i], "irq %d", irq);
|
|
|
|
rc = ata_host_register(host, sht);
|
|
/* if failed, just free the IRQ and leave ports alone */
|
|
if (rc)
|
|
devm_free_irq(host->dev, irq, host);
|
|
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_activate);
|
|
|
|
/**
|
|
* ata_port_detach - Detach ATA port in preparation of device removal
|
|
* @ap: ATA port to be detached
|
|
*
|
|
* Detach all ATA devices and the associated SCSI devices of @ap;
|
|
* then, remove the associated SCSI host. @ap is guaranteed to
|
|
* be quiescent on return from this function.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep).
|
|
*/
|
|
static void ata_port_detach(struct ata_port *ap)
|
|
{
|
|
unsigned long flags;
|
|
struct ata_link *link;
|
|
struct ata_device *dev;
|
|
|
|
if (!ap->ops->error_handler)
|
|
goto skip_eh;
|
|
|
|
/* tell EH we're leaving & flush EH */
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
ap->pflags |= ATA_PFLAG_UNLOADING;
|
|
ata_port_schedule_eh(ap);
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
/* wait till EH commits suicide */
|
|
ata_port_wait_eh(ap);
|
|
|
|
/* it better be dead now */
|
|
WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
|
|
|
|
cancel_delayed_work_sync(&ap->hotplug_task);
|
|
|
|
skip_eh:
|
|
/* clean up zpodd on port removal */
|
|
ata_for_each_link(link, ap, HOST_FIRST) {
|
|
ata_for_each_dev(dev, link, ALL) {
|
|
if (zpodd_dev_enabled(dev))
|
|
zpodd_exit(dev);
|
|
}
|
|
}
|
|
if (ap->pmp_link) {
|
|
int i;
|
|
for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
|
|
ata_tlink_delete(&ap->pmp_link[i]);
|
|
}
|
|
/* remove the associated SCSI host */
|
|
scsi_remove_host(ap->scsi_host);
|
|
ata_tport_delete(ap);
|
|
}
|
|
|
|
/**
|
|
* ata_host_detach - Detach all ports of an ATA host
|
|
* @host: Host to detach
|
|
*
|
|
* Detach all ports of @host.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep).
|
|
*/
|
|
void ata_host_detach(struct ata_host *host)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
/* Ensure ata_port probe has completed */
|
|
async_synchronize_cookie(host->ports[i]->cookie + 1);
|
|
ata_port_detach(host->ports[i]);
|
|
}
|
|
|
|
/* the host is dead now, dissociate ACPI */
|
|
ata_acpi_dissociate(host);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_host_detach);
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
/**
|
|
* ata_pci_remove_one - PCI layer callback for device removal
|
|
* @pdev: PCI device that was removed
|
|
*
|
|
* PCI layer indicates to libata via this hook that hot-unplug or
|
|
* module unload event has occurred. Detach all ports. Resource
|
|
* release is handled via devres.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*/
|
|
void ata_pci_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
|
|
ata_host_detach(host);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
|
|
|
|
void ata_pci_shutdown_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int i;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
ap->pflags |= ATA_PFLAG_FROZEN;
|
|
|
|
/* Disable port interrupts */
|
|
if (ap->ops->freeze)
|
|
ap->ops->freeze(ap);
|
|
|
|
/* Stop the port DMA engines */
|
|
if (ap->ops->port_stop)
|
|
ap->ops->port_stop(ap);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pci_shutdown_one);
|
|
|
|
/* move to PCI subsystem */
|
|
int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
|
|
{
|
|
unsigned long tmp = 0;
|
|
|
|
switch (bits->width) {
|
|
case 1: {
|
|
u8 tmp8 = 0;
|
|
pci_read_config_byte(pdev, bits->reg, &tmp8);
|
|
tmp = tmp8;
|
|
break;
|
|
}
|
|
case 2: {
|
|
u16 tmp16 = 0;
|
|
pci_read_config_word(pdev, bits->reg, &tmp16);
|
|
tmp = tmp16;
|
|
break;
|
|
}
|
|
case 4: {
|
|
u32 tmp32 = 0;
|
|
pci_read_config_dword(pdev, bits->reg, &tmp32);
|
|
tmp = tmp32;
|
|
break;
|
|
}
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp &= bits->mask;
|
|
|
|
return (tmp == bits->val) ? 1 : 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_test_config_bits);
|
|
|
|
#ifdef CONFIG_PM
|
|
void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
{
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
if (mesg.event & PM_EVENT_SLEEP)
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
|
|
|
|
int ata_pci_device_do_resume(struct pci_dev *pdev)
|
|
{
|
|
int rc;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc) {
|
|
dev_err(&pdev->dev,
|
|
"failed to enable device after resume (%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
|
|
|
|
int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int rc = 0;
|
|
|
|
rc = ata_host_suspend(host, mesg);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ata_pci_device_do_suspend(pdev, mesg);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
|
|
|
|
int ata_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc == 0)
|
|
ata_host_resume(host);
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_pci_device_resume);
|
|
#endif /* CONFIG_PM */
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/**
|
|
* ata_platform_remove_one - Platform layer callback for device removal
|
|
* @pdev: Platform device that was removed
|
|
*
|
|
* Platform layer indicates to libata via this hook that hot-unplug or
|
|
* module unload event has occurred. Detach all ports. Resource
|
|
* release is handled via devres.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from platform layer (may sleep).
|
|
*/
|
|
int ata_platform_remove_one(struct platform_device *pdev)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(pdev);
|
|
|
|
ata_host_detach(host);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_platform_remove_one);
|
|
|
|
#ifdef CONFIG_ATA_FORCE
|
|
static int __init ata_parse_force_one(char **cur,
|
|
struct ata_force_ent *force_ent,
|
|
const char **reason)
|
|
{
|
|
static const struct ata_force_param force_tbl[] __initconst = {
|
|
{ "40c", .cbl = ATA_CBL_PATA40 },
|
|
{ "80c", .cbl = ATA_CBL_PATA80 },
|
|
{ "short40c", .cbl = ATA_CBL_PATA40_SHORT },
|
|
{ "unk", .cbl = ATA_CBL_PATA_UNK },
|
|
{ "ign", .cbl = ATA_CBL_PATA_IGN },
|
|
{ "sata", .cbl = ATA_CBL_SATA },
|
|
{ "1.5Gbps", .spd_limit = 1 },
|
|
{ "3.0Gbps", .spd_limit = 2 },
|
|
{ "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
|
|
{ "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
|
|
{ "noncqtrim", .horkage_on = ATA_HORKAGE_NO_NCQ_TRIM },
|
|
{ "ncqtrim", .horkage_off = ATA_HORKAGE_NO_NCQ_TRIM },
|
|
{ "noncqati", .horkage_on = ATA_HORKAGE_NO_NCQ_ON_ATI },
|
|
{ "ncqati", .horkage_off = ATA_HORKAGE_NO_NCQ_ON_ATI },
|
|
{ "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID },
|
|
{ "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
|
|
{ "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
|
|
{ "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
|
|
{ "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) },
|
|
{ "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) },
|
|
{ "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) },
|
|
{ "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) },
|
|
{ "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) },
|
|
{ "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) },
|
|
{ "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) },
|
|
{ "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) },
|
|
{ "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) },
|
|
{ "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
|
|
{ "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
|
|
{ "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
|
|
{ "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
|
|
{ "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
|
|
{ "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
|
|
{ "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
|
|
{ "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
|
|
{ "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
|
|
{ "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
|
|
{ "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
|
|
{ "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
|
|
{ "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
|
|
{ "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
|
|
{ "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
|
|
{ "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
|
|
{ "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
|
|
{ "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
|
|
{ "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
|
|
{ "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
|
|
{ "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
|
|
{ "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
|
|
{ "nohrst", .lflags = ATA_LFLAG_NO_HRST },
|
|
{ "nosrst", .lflags = ATA_LFLAG_NO_SRST },
|
|
{ "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
|
|
{ "rstonce", .lflags = ATA_LFLAG_RST_ONCE },
|
|
{ "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR },
|
|
{ "disable", .horkage_on = ATA_HORKAGE_DISABLE },
|
|
};
|
|
char *start = *cur, *p = *cur;
|
|
char *id, *val, *endp;
|
|
const struct ata_force_param *match_fp = NULL;
|
|
int nr_matches = 0, i;
|
|
|
|
/* find where this param ends and update *cur */
|
|
while (*p != '\0' && *p != ',')
|
|
p++;
|
|
|
|
if (*p == '\0')
|
|
*cur = p;
|
|
else
|
|
*cur = p + 1;
|
|
|
|
*p = '\0';
|
|
|
|
/* parse */
|
|
p = strchr(start, ':');
|
|
if (!p) {
|
|
val = strstrip(start);
|
|
goto parse_val;
|
|
}
|
|
*p = '\0';
|
|
|
|
id = strstrip(start);
|
|
val = strstrip(p + 1);
|
|
|
|
/* parse id */
|
|
p = strchr(id, '.');
|
|
if (p) {
|
|
*p++ = '\0';
|
|
force_ent->device = simple_strtoul(p, &endp, 10);
|
|
if (p == endp || *endp != '\0') {
|
|
*reason = "invalid device";
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
force_ent->port = simple_strtoul(id, &endp, 10);
|
|
if (id == endp || *endp != '\0') {
|
|
*reason = "invalid port/link";
|
|
return -EINVAL;
|
|
}
|
|
|
|
parse_val:
|
|
/* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */
|
|
for (i = 0; i < ARRAY_SIZE(force_tbl); i++) {
|
|
const struct ata_force_param *fp = &force_tbl[i];
|
|
|
|
if (strncasecmp(val, fp->name, strlen(val)))
|
|
continue;
|
|
|
|
nr_matches++;
|
|
match_fp = fp;
|
|
|
|
if (strcasecmp(val, fp->name) == 0) {
|
|
nr_matches = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!nr_matches) {
|
|
*reason = "unknown value";
|
|
return -EINVAL;
|
|
}
|
|
if (nr_matches > 1) {
|
|
*reason = "ambiguous value";
|
|
return -EINVAL;
|
|
}
|
|
|
|
force_ent->param = *match_fp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init ata_parse_force_param(void)
|
|
{
|
|
int idx = 0, size = 1;
|
|
int last_port = -1, last_device = -1;
|
|
char *p, *cur, *next;
|
|
|
|
/* calculate maximum number of params and allocate force_tbl */
|
|
for (p = ata_force_param_buf; *p; p++)
|
|
if (*p == ',')
|
|
size++;
|
|
|
|
ata_force_tbl = kcalloc(size, sizeof(ata_force_tbl[0]), GFP_KERNEL);
|
|
if (!ata_force_tbl) {
|
|
printk(KERN_WARNING "ata: failed to extend force table, "
|
|
"libata.force ignored\n");
|
|
return;
|
|
}
|
|
|
|
/* parse and populate the table */
|
|
for (cur = ata_force_param_buf; *cur != '\0'; cur = next) {
|
|
const char *reason = "";
|
|
struct ata_force_ent te = { .port = -1, .device = -1 };
|
|
|
|
next = cur;
|
|
if (ata_parse_force_one(&next, &te, &reason)) {
|
|
printk(KERN_WARNING "ata: failed to parse force "
|
|
"parameter \"%s\" (%s)\n",
|
|
cur, reason);
|
|
continue;
|
|
}
|
|
|
|
if (te.port == -1) {
|
|
te.port = last_port;
|
|
te.device = last_device;
|
|
}
|
|
|
|
ata_force_tbl[idx++] = te;
|
|
|
|
last_port = te.port;
|
|
last_device = te.device;
|
|
}
|
|
|
|
ata_force_tbl_size = idx;
|
|
}
|
|
|
|
static void ata_free_force_param(void)
|
|
{
|
|
kfree(ata_force_tbl);
|
|
}
|
|
#else
|
|
static inline void ata_parse_force_param(void) { }
|
|
static inline void ata_free_force_param(void) { }
|
|
#endif
|
|
|
|
static int __init ata_init(void)
|
|
{
|
|
int rc;
|
|
|
|
ata_parse_force_param();
|
|
|
|
rc = ata_sff_init();
|
|
if (rc) {
|
|
ata_free_force_param();
|
|
return rc;
|
|
}
|
|
|
|
libata_transport_init();
|
|
ata_scsi_transport_template = ata_attach_transport();
|
|
if (!ata_scsi_transport_template) {
|
|
ata_sff_exit();
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
|
|
return 0;
|
|
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
static void __exit ata_exit(void)
|
|
{
|
|
ata_release_transport(ata_scsi_transport_template);
|
|
libata_transport_exit();
|
|
ata_sff_exit();
|
|
ata_free_force_param();
|
|
}
|
|
|
|
subsys_initcall(ata_init);
|
|
module_exit(ata_exit);
|
|
|
|
static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1);
|
|
|
|
int ata_ratelimit(void)
|
|
{
|
|
return __ratelimit(&ratelimit);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_ratelimit);
|
|
|
|
/**
|
|
* ata_msleep - ATA EH owner aware msleep
|
|
* @ap: ATA port to attribute the sleep to
|
|
* @msecs: duration to sleep in milliseconds
|
|
*
|
|
* Sleeps @msecs. If the current task is owner of @ap's EH, the
|
|
* ownership is released before going to sleep and reacquired
|
|
* after the sleep is complete. IOW, other ports sharing the
|
|
* @ap->host will be allowed to own the EH while this task is
|
|
* sleeping.
|
|
*
|
|
* LOCKING:
|
|
* Might sleep.
|
|
*/
|
|
void ata_msleep(struct ata_port *ap, unsigned int msecs)
|
|
{
|
|
bool owns_eh = ap && ap->host->eh_owner == current;
|
|
|
|
if (owns_eh)
|
|
ata_eh_release(ap);
|
|
|
|
if (msecs < 20) {
|
|
unsigned long usecs = msecs * USEC_PER_MSEC;
|
|
usleep_range(usecs, usecs + 50);
|
|
} else {
|
|
msleep(msecs);
|
|
}
|
|
|
|
if (owns_eh)
|
|
ata_eh_acquire(ap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_msleep);
|
|
|
|
/**
|
|
* ata_wait_register - wait until register value changes
|
|
* @ap: ATA port to wait register for, can be NULL
|
|
* @reg: IO-mapped register
|
|
* @mask: Mask to apply to read register value
|
|
* @val: Wait condition
|
|
* @interval: polling interval in milliseconds
|
|
* @timeout: timeout in milliseconds
|
|
*
|
|
* Waiting for some bits of register to change is a common
|
|
* operation for ATA controllers. This function reads 32bit LE
|
|
* IO-mapped register @reg and tests for the following condition.
|
|
*
|
|
* (*@reg & mask) != val
|
|
*
|
|
* If the condition is met, it returns; otherwise, the process is
|
|
* repeated after @interval_msec until timeout.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* The final register value.
|
|
*/
|
|
u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val,
|
|
unsigned long interval, unsigned long timeout)
|
|
{
|
|
unsigned long deadline;
|
|
u32 tmp;
|
|
|
|
tmp = ioread32(reg);
|
|
|
|
/* Calculate timeout _after_ the first read to make sure
|
|
* preceding writes reach the controller before starting to
|
|
* eat away the timeout.
|
|
*/
|
|
deadline = ata_deadline(jiffies, timeout);
|
|
|
|
while ((tmp & mask) == val && time_before(jiffies, deadline)) {
|
|
ata_msleep(ap, interval);
|
|
tmp = ioread32(reg);
|
|
}
|
|
|
|
return tmp;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_wait_register);
|
|
|
|
/*
|
|
* Dummy port_ops
|
|
*/
|
|
static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
return AC_ERR_SYSTEM;
|
|
}
|
|
|
|
static void ata_dummy_error_handler(struct ata_port *ap)
|
|
{
|
|
/* truly dummy */
|
|
}
|
|
|
|
struct ata_port_operations ata_dummy_port_ops = {
|
|
.qc_prep = ata_noop_qc_prep,
|
|
.qc_issue = ata_dummy_qc_issue,
|
|
.error_handler = ata_dummy_error_handler,
|
|
.sched_eh = ata_std_sched_eh,
|
|
.end_eh = ata_std_end_eh,
|
|
};
|
|
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
|
|
|
|
const struct ata_port_info ata_dummy_port_info = {
|
|
.port_ops = &ata_dummy_port_ops,
|
|
};
|
|
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
|
|
|
|
/*
|
|
* Utility print functions
|
|
*/
|
|
void ata_port_printk(const struct ata_port *ap, const char *level,
|
|
const char *fmt, ...)
|
|
{
|
|
struct va_format vaf;
|
|
va_list args;
|
|
|
|
va_start(args, fmt);
|
|
|
|
vaf.fmt = fmt;
|
|
vaf.va = &args;
|
|
|
|
printk("%sata%u: %pV", level, ap->print_id, &vaf);
|
|
|
|
va_end(args);
|
|
}
|
|
EXPORT_SYMBOL(ata_port_printk);
|
|
|
|
void ata_link_printk(const struct ata_link *link, const char *level,
|
|
const char *fmt, ...)
|
|
{
|
|
struct va_format vaf;
|
|
va_list args;
|
|
|
|
va_start(args, fmt);
|
|
|
|
vaf.fmt = fmt;
|
|
vaf.va = &args;
|
|
|
|
if (sata_pmp_attached(link->ap) || link->ap->slave_link)
|
|
printk("%sata%u.%02u: %pV",
|
|
level, link->ap->print_id, link->pmp, &vaf);
|
|
else
|
|
printk("%sata%u: %pV",
|
|
level, link->ap->print_id, &vaf);
|
|
|
|
va_end(args);
|
|
}
|
|
EXPORT_SYMBOL(ata_link_printk);
|
|
|
|
void ata_dev_printk(const struct ata_device *dev, const char *level,
|
|
const char *fmt, ...)
|
|
{
|
|
struct va_format vaf;
|
|
va_list args;
|
|
|
|
va_start(args, fmt);
|
|
|
|
vaf.fmt = fmt;
|
|
vaf.va = &args;
|
|
|
|
printk("%sata%u.%02u: %pV",
|
|
level, dev->link->ap->print_id, dev->link->pmp + dev->devno,
|
|
&vaf);
|
|
|
|
va_end(args);
|
|
}
|
|
EXPORT_SYMBOL(ata_dev_printk);
|
|
|
|
void ata_print_version(const struct device *dev, const char *version)
|
|
{
|
|
dev_printk(KERN_DEBUG, dev, "version %s\n", version);
|
|
}
|
|
EXPORT_SYMBOL(ata_print_version);
|