linux/drivers/pinctrl/pinctrl-exynos.c
Linus Torvalds 6fa52ed33b ARM: arm-soc driver changes for 3.10
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00

811 lines
25 KiB
C

/*
* Exynos specific support for Samsung pinctrl/gpiolib driver with eint support.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This file contains the Samsung Exynos specific information required by the
* the Samsung pinctrl/gpiolib driver. It also includes the implementation of
* external gpio and wakeup interrupt support.
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/of_irq.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include "pinctrl-samsung.h"
#include "pinctrl-exynos.h"
static struct samsung_pin_bank_type bank_type_off = {
.fld_width = { 4, 1, 2, 2, 2, 2, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
};
static struct samsung_pin_bank_type bank_type_alive = {
.fld_width = { 4, 1, 2, 2, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
};
/* list of external wakeup controllers supported */
static const struct of_device_id exynos_wkup_irq_ids[] = {
{ .compatible = "samsung,exynos4210-wakeup-eint", },
{ }
};
static void exynos_gpio_irq_unmask(struct irq_data *irqd)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << irqd->hwirq);
writel(mask, d->virt_base + reg_mask);
}
static void exynos_gpio_irq_mask(struct irq_data *irqd)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask |= 1 << irqd->hwirq;
writel(mask, d->virt_base + reg_mask);
}
static void exynos_gpio_irq_ack(struct irq_data *irqd)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset;
writel(1 << irqd->hwirq, d->virt_base + reg_pend);
}
static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pin_bank_type *bank_type = bank->type;
struct samsung_pinctrl_drv_data *d = bank->drvdata;
struct samsung_pin_ctrl *ctrl = d->ctrl;
unsigned int pin = irqd->hwirq;
unsigned int shift = EXYNOS_EINT_CON_LEN * pin;
unsigned int con, trig_type;
unsigned long reg_con = ctrl->geint_con + bank->eint_offset;
unsigned long flags;
unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
trig_type = EXYNOS_EINT_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
trig_type = EXYNOS_EINT_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
trig_type = EXYNOS_EINT_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
trig_type = EXYNOS_EINT_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
trig_type = EXYNOS_EINT_LEVEL_LOW;
break;
default:
pr_err("unsupported external interrupt type\n");
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(irqd->irq, handle_edge_irq);
else
__irq_set_handler_locked(irqd->irq, handle_level_irq);
con = readl(d->virt_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC];
shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
spin_lock_irqsave(&bank->slock, flags);
con = readl(d->virt_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
writel(con, d->virt_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
return 0;
}
/*
* irq_chip for gpio interrupts.
*/
static struct irq_chip exynos_gpio_irq_chip = {
.name = "exynos_gpio_irq_chip",
.irq_unmask = exynos_gpio_irq_unmask,
.irq_mask = exynos_gpio_irq_mask,
.irq_ack = exynos_gpio_irq_ack,
.irq_set_type = exynos_gpio_irq_set_type,
};
static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct samsung_pin_bank *b = h->host_data;
irq_set_chip_data(virq, b);
irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
handle_level_irq);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
/*
* irq domain callbacks for external gpio interrupt controller.
*/
static const struct irq_domain_ops exynos_gpio_irqd_ops = {
.map = exynos_gpio_irq_map,
.xlate = irq_domain_xlate_twocell,
};
static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
{
struct samsung_pinctrl_drv_data *d = data;
struct samsung_pin_ctrl *ctrl = d->ctrl;
struct samsung_pin_bank *bank = ctrl->pin_banks;
unsigned int svc, group, pin, virq;
svc = readl(d->virt_base + ctrl->svc);
group = EXYNOS_SVC_GROUP(svc);
pin = svc & EXYNOS_SVC_NUM_MASK;
if (!group)
return IRQ_HANDLED;
bank += (group - 1);
virq = irq_linear_revmap(bank->irq_domain, pin);
if (!virq)
return IRQ_NONE;
generic_handle_irq(virq);
return IRQ_HANDLED;
}
/*
* exynos_eint_gpio_init() - setup handling of external gpio interrupts.
* @d: driver data of samsung pinctrl driver.
*/
static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
{
struct samsung_pin_bank *bank;
struct device *dev = d->dev;
unsigned int ret;
unsigned int i;
if (!d->irq) {
dev_err(dev, "irq number not available\n");
return -EINVAL;
}
ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq,
0, dev_name(dev), d);
if (ret) {
dev_err(dev, "irq request failed\n");
return -ENXIO;
}
bank = d->ctrl->pin_banks;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
bank->irq_domain = irq_domain_add_linear(bank->of_node,
bank->nr_pins, &exynos_gpio_irqd_ops, bank);
if (!bank->irq_domain) {
dev_err(dev, "gpio irq domain add failed\n");
return -ENXIO;
}
}
return 0;
}
static void exynos_wkup_irq_unmask(struct irq_data *irqd)
{
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << irqd->hwirq);
writel(mask, d->virt_base + reg_mask);
}
static void exynos_wkup_irq_mask(struct irq_data *irqd)
{
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask |= 1 << irqd->hwirq;
writel(mask, d->virt_base + reg_mask);
}
static void exynos_wkup_irq_ack(struct irq_data *irqd)
{
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long pend = d->ctrl->weint_pend + b->eint_offset;
writel(1 << irqd->hwirq, d->virt_base + pend);
}
static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pin_bank_type *bank_type = bank->type;
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int pin = irqd->hwirq;
unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset;
unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
unsigned long con, trig_type;
unsigned long flags;
unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
trig_type = EXYNOS_EINT_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
trig_type = EXYNOS_EINT_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
trig_type = EXYNOS_EINT_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_HIGH:
trig_type = EXYNOS_EINT_LEVEL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
trig_type = EXYNOS_EINT_LEVEL_LOW;
break;
default:
pr_err("unsupported external interrupt type\n");
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(irqd->irq, handle_edge_irq);
else
__irq_set_handler_locked(irqd->irq, handle_level_irq);
con = readl(d->virt_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC];
shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
spin_lock_irqsave(&bank->slock, flags);
con = readl(d->virt_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
writel(con, d->virt_base + reg_con);
spin_unlock_irqrestore(&bank->slock, flags);
return 0;
}
/*
* irq_chip for wakeup interrupts
*/
static struct irq_chip exynos_wkup_irq_chip = {
.name = "exynos_wkup_irq_chip",
.irq_unmask = exynos_wkup_irq_unmask,
.irq_mask = exynos_wkup_irq_mask,
.irq_ack = exynos_wkup_irq_ack,
.irq_set_type = exynos_wkup_irq_set_type,
};
/* interrupt handler for wakeup interrupts 0..15 */
static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
struct exynos_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pin_bank *bank = eintd->bank;
struct irq_chip *chip = irq_get_chip(irq);
int eint_irq;
chained_irq_enter(chip, desc);
chip->irq_mask(&desc->irq_data);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq);
generic_handle_irq(eint_irq);
chip->irq_unmask(&desc->irq_data);
chained_irq_exit(chip, desc);
}
static inline void exynos_irq_demux_eint(unsigned long pend,
struct irq_domain *domain)
{
unsigned int irq;
while (pend) {
irq = fls(pend) - 1;
generic_handle_irq(irq_find_mapping(domain, irq));
pend &= ~(1 << irq);
}
}
/* interrupt handler for wakeup interrupt 16 */
static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata;
struct samsung_pin_ctrl *ctrl = d->ctrl;
unsigned long pend;
unsigned long mask;
int i;
chained_irq_enter(chip, desc);
for (i = 0; i < eintd->nr_banks; ++i) {
struct samsung_pin_bank *b = eintd->banks[i];
pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset);
mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset);
exynos_irq_demux_eint(pend & ~mask, b->irq_domain);
}
chained_irq_exit(chip, desc);
}
static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip, handle_level_irq);
irq_set_chip_data(virq, h->host_data);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
/*
* irq domain callbacks for external wakeup interrupt controller.
*/
static const struct irq_domain_ops exynos_wkup_irqd_ops = {
.map = exynos_wkup_irq_map,
.xlate = irq_domain_xlate_twocell,
};
/*
* exynos_eint_wkup_init() - setup handling of external wakeup interrupts.
* @d: driver data of samsung pinctrl driver.
*/
static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
{
struct device *dev = d->dev;
struct device_node *wkup_np = NULL;
struct device_node *np;
struct samsung_pin_bank *bank;
struct exynos_weint_data *weint_data;
struct exynos_muxed_weint_data *muxed_data;
unsigned int muxed_banks = 0;
unsigned int i;
int idx, irq;
for_each_child_of_node(dev->of_node, np) {
if (of_match_node(exynos_wkup_irq_ids, np)) {
wkup_np = np;
break;
}
}
if (!wkup_np)
return -ENODEV;
bank = d->ctrl->pin_banks;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_WKUP)
continue;
bank->irq_domain = irq_domain_add_linear(bank->of_node,
bank->nr_pins, &exynos_wkup_irqd_ops, bank);
if (!bank->irq_domain) {
dev_err(dev, "wkup irq domain add failed\n");
return -ENXIO;
}
if (!of_find_property(bank->of_node, "interrupts", NULL)) {
bank->eint_type = EINT_TYPE_WKUP_MUX;
++muxed_banks;
continue;
}
weint_data = devm_kzalloc(dev, bank->nr_pins
* sizeof(*weint_data), GFP_KERNEL);
if (!weint_data) {
dev_err(dev, "could not allocate memory for weint_data\n");
return -ENOMEM;
}
for (idx = 0; idx < bank->nr_pins; ++idx) {
irq = irq_of_parse_and_map(bank->of_node, idx);
if (!irq) {
dev_err(dev, "irq number for eint-%s-%d not found\n",
bank->name, idx);
continue;
}
weint_data[idx].irq = idx;
weint_data[idx].bank = bank;
irq_set_handler_data(irq, &weint_data[idx]);
irq_set_chained_handler(irq, exynos_irq_eint0_15);
}
}
if (!muxed_banks)
return 0;
irq = irq_of_parse_and_map(wkup_np, 0);
if (!irq) {
dev_err(dev, "irq number for muxed EINTs not found\n");
return 0;
}
muxed_data = devm_kzalloc(dev, sizeof(*muxed_data)
+ muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL);
if (!muxed_data) {
dev_err(dev, "could not allocate memory for muxed_data\n");
return -ENOMEM;
}
irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
irq_set_handler_data(irq, muxed_data);
bank = d->ctrl->pin_banks;
idx = 0;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_WKUP_MUX)
continue;
muxed_data->banks[idx++] = bank;
}
muxed_data->nr_banks = muxed_banks;
return 0;
}
/* pin banks of exynos4210 pin-controller 0 */
static struct samsung_pin_bank exynos4210_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20),
EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24),
EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28),
EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
};
/* pin banks of exynos4210 pin-controller 1 */
static struct samsung_pin_bank exynos4210_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00),
EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04),
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos4210 pin-controller 2 */
static struct samsung_pin_bank exynos4210_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
};
/*
* Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
* three gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos4210_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos4210-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4210_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.label = "exynos4210-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4210_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
.label = "exynos4210-gpio-ctrl2",
},
};
/* pin banks of exynos4x12 pin-controller 0 */
static struct samsung_pin_bank exynos4x12_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x40),
EXYNOS_PIN_BANK_EINTG(5, 0x260, "gpj1", 0x44),
};
/* pin banks of exynos4x12 pin-controller 1 */
static struct samsung_pin_bank exynos4x12_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
EXYNOS_PIN_BANK_EINTG(7, 0x0C0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpl1", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28),
EXYNOS_PIN_BANK_EINTG(5, 0x2A0, "gpm2", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x2C0, "gpm3", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x2E0, "gpm4", 0x34),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos4x12 pin-controller 2 */
static struct samsung_pin_bank exynos4x12_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/* pin banks of exynos4x12 pin-controller 3 */
static struct samsung_pin_bank exynos4x12_pin_banks3[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpv4", 0x10),
};
/*
* Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos4x12_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks0),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos4x12-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4x12_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks1),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.label = "exynos4x12-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4x12_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks2),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos4x12-gpio-ctrl2",
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos4x12_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks3),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos4x12-gpio-ctrl3",
},
};
/* pin banks of exynos5250 pin-controller 0 */
static struct samsung_pin_bank exynos5250_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20),
EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28),
EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30),
EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34),
EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos5250 pin-controller 1 */
static struct samsung_pin_bank exynos5250_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08),
EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20),
};
/* pin banks of exynos5250 pin-controller 2 */
static struct samsung_pin_bank exynos5250_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
};
/* pin banks of exynos5250 pin-controller 3 */
static struct samsung_pin_bank exynos5250_pin_banks3[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/*
* Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos5250_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks0),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.weint_con = EXYNOS_WKUP_ECON_OFFSET,
.weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
.weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.label = "exynos5250-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5250_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks1),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos5250-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5250_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks2),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos5250-gpio-ctrl2",
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos5250_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks3),
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.label = "exynos5250-gpio-ctrl3",
},
};