mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 05:04:09 +08:00
874dfbcf21
Printing probe success is discouraged, because we can use tracing for this purpose. Remove useless print message after Sunplus OCOTP driver probe. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220321110326.44652-3-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
227 lines
5.7 KiB
C
227 lines
5.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
* The OCOTP driver for Sunplus SP7021
|
|
*
|
|
* Copyright (C) 2019 Sunplus Technology Inc., All rights reserved.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-provider.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/*
|
|
* OTP memory
|
|
* Each bank contains 4 words (32 bits).
|
|
* Bank 0 starts at offset 0 from the base.
|
|
*/
|
|
|
|
#define OTP_WORDS_PER_BANK 4
|
|
#define OTP_WORD_SIZE sizeof(u32)
|
|
#define OTP_BIT_ADDR_OF_BANK (8 * OTP_WORD_SIZE * OTP_WORDS_PER_BANK)
|
|
#define QAC628_OTP_NUM_BANKS 8
|
|
#define QAC628_OTP_SIZE (QAC628_OTP_NUM_BANKS * OTP_WORDS_PER_BANK * OTP_WORD_SIZE)
|
|
#define OTP_READ_TIMEOUT_US 200000
|
|
|
|
/* HB_GPIO */
|
|
#define ADDRESS_8_DATA 0x20
|
|
|
|
/* OTP_RX */
|
|
#define OTP_CONTROL_2 0x48
|
|
#define OTP_RD_PERIOD GENMASK(15, 8)
|
|
#define OTP_RD_PERIOD_MASK ~GENMASK(15, 8)
|
|
#define CPU_CLOCK FIELD_PREP(OTP_RD_PERIOD, 30)
|
|
#define SEL_BAK_KEY2 BIT(5)
|
|
#define SEL_BAK_KEY2_MASK ~BIT(5)
|
|
#define SW_TRIM_EN BIT(4)
|
|
#define SW_TRIM_EN_MASK ~BIT(4)
|
|
#define SEL_BAK_KEY BIT(3)
|
|
#define SEL_BAK_KEY_MASK ~BIT(3)
|
|
#define OTP_READ BIT(2)
|
|
#define OTP_LOAD_SECURE_DATA BIT(1)
|
|
#define OTP_LOAD_SECURE_DATA_MASK ~BIT(1)
|
|
#define OTP_DO_CRC BIT(0)
|
|
#define OTP_DO_CRC_MASK ~BIT(0)
|
|
#define OTP_STATUS 0x4c
|
|
#define OTP_READ_DONE BIT(4)
|
|
#define OTP_READ_DONE_MASK ~BIT(4)
|
|
#define OTP_LOAD_SECURE_DONE_MASK ~BIT(2)
|
|
#define OTP_READ_ADDRESS 0x50
|
|
|
|
enum base_type {
|
|
HB_GPIO,
|
|
OTPRX,
|
|
BASEMAX,
|
|
};
|
|
|
|
struct sp_ocotp_priv {
|
|
struct device *dev;
|
|
void __iomem *base[BASEMAX];
|
|
struct clk *clk;
|
|
};
|
|
|
|
struct sp_ocotp_data {
|
|
int size;
|
|
};
|
|
|
|
static const struct sp_ocotp_data sp_otp_v0 = {
|
|
.size = QAC628_OTP_SIZE,
|
|
};
|
|
|
|
static int sp_otp_read_real(struct sp_ocotp_priv *otp, int addr, char *value)
|
|
{
|
|
unsigned int addr_data;
|
|
unsigned int byte_shift;
|
|
unsigned int status;
|
|
int ret;
|
|
|
|
addr_data = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
|
|
addr_data = addr_data / OTP_WORD_SIZE;
|
|
|
|
byte_shift = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
|
|
byte_shift = byte_shift % OTP_WORD_SIZE;
|
|
|
|
addr = addr / (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
|
|
addr = addr * OTP_BIT_ADDR_OF_BANK;
|
|
|
|
writel(readl(otp->base[OTPRX] + OTP_STATUS) & OTP_READ_DONE_MASK &
|
|
OTP_LOAD_SECURE_DONE_MASK, otp->base[OTPRX] + OTP_STATUS);
|
|
writel(addr, otp->base[OTPRX] + OTP_READ_ADDRESS);
|
|
writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) | OTP_READ,
|
|
otp->base[OTPRX] + OTP_CONTROL_2);
|
|
writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) & SEL_BAK_KEY2_MASK & SW_TRIM_EN_MASK
|
|
& SEL_BAK_KEY_MASK & OTP_LOAD_SECURE_DATA_MASK & OTP_DO_CRC_MASK,
|
|
otp->base[OTPRX] + OTP_CONTROL_2);
|
|
writel((readl(otp->base[OTPRX] + OTP_CONTROL_2) & OTP_RD_PERIOD_MASK) | CPU_CLOCK,
|
|
otp->base[OTPRX] + OTP_CONTROL_2);
|
|
|
|
ret = readl_poll_timeout(otp->base[OTPRX] + OTP_STATUS, status,
|
|
status & OTP_READ_DONE, 10, OTP_READ_TIMEOUT_US);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*value = (readl(otp->base[HB_GPIO] + ADDRESS_8_DATA + addr_data * OTP_WORD_SIZE)
|
|
>> (8 * byte_shift)) & 0xff;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sp_ocotp_read(void *priv, unsigned int offset, void *value, size_t bytes)
|
|
{
|
|
struct sp_ocotp_priv *otp = priv;
|
|
unsigned int addr;
|
|
char *buf = value;
|
|
char val[4];
|
|
int ret;
|
|
|
|
ret = clk_enable(otp->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*buf = 0;
|
|
for (addr = offset; addr < (offset + bytes); addr++) {
|
|
ret = sp_otp_read_real(otp, addr, val);
|
|
if (ret < 0) {
|
|
dev_err(otp->dev, "OTP read fail:%d at %d", ret, addr);
|
|
goto disable_clk;
|
|
}
|
|
|
|
*buf++ = *val;
|
|
}
|
|
|
|
disable_clk:
|
|
clk_disable(otp->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct nvmem_config sp_ocotp_nvmem_config = {
|
|
.name = "sp-ocotp",
|
|
.read_only = true,
|
|
.word_size = 1,
|
|
.size = QAC628_OTP_SIZE,
|
|
.stride = 1,
|
|
.reg_read = sp_ocotp_read,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int sp_ocotp_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct nvmem_device *nvmem;
|
|
struct sp_ocotp_priv *otp;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
|
|
if (!otp)
|
|
return -ENOMEM;
|
|
|
|
otp->dev = dev;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hb_gpio");
|
|
otp->base[HB_GPIO] = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(otp->base[HB_GPIO]))
|
|
return PTR_ERR(otp->base[HB_GPIO]);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otprx");
|
|
otp->base[OTPRX] = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(otp->base[OTPRX]))
|
|
return PTR_ERR(otp->base[OTPRX]);
|
|
|
|
otp->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(otp->clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(otp->clk),
|
|
"devm_clk_get fail\n");
|
|
|
|
ret = clk_prepare(otp->clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to prepare clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
sp_ocotp_nvmem_config.priv = otp;
|
|
sp_ocotp_nvmem_config.dev = dev;
|
|
|
|
nvmem = devm_nvmem_register(dev, &sp_ocotp_nvmem_config);
|
|
if (IS_ERR(nvmem))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
|
|
"register nvmem device fail\n");
|
|
|
|
platform_set_drvdata(pdev, nvmem);
|
|
|
|
dev_dbg(dev, "banks:%d x wpb:%d x wsize:%d = %d",
|
|
(int)QAC628_OTP_NUM_BANKS, (int)OTP_WORDS_PER_BANK,
|
|
(int)OTP_WORD_SIZE, (int)QAC628_OTP_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sp_ocotp_dt_ids[] = {
|
|
{ .compatible = "sunplus,sp7021-ocotp", .data = &sp_otp_v0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sp_ocotp_dt_ids);
|
|
|
|
static struct platform_driver sp_otp_driver = {
|
|
.probe = sp_ocotp_probe,
|
|
.driver = {
|
|
.name = "sunplus,sp7021-ocotp",
|
|
.of_match_table = sp_ocotp_dt_ids,
|
|
}
|
|
};
|
|
module_platform_driver(sp_otp_driver);
|
|
|
|
MODULE_AUTHOR("Vincent Shih <vincent.sunplus@gmail.com>");
|
|
MODULE_DESCRIPTION("Sunplus On-Chip OTP driver");
|
|
MODULE_LICENSE("GPL");
|
|
|