mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
2e7c416cba
As of commit 1006ed7e1b
("serial: imx: Use generic uart-has-rtscts
DT property"), the Freescale IMX UART driver recognizes the generic
"uart-has-rtscts" DT property, deprecating the vendor-specific
"fsl,uart-has-rtscts" DT property. Hence replace the latter by the
former in all DTS files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
297 lines
6.5 KiB
Plaintext
297 lines
6.5 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "imx27.dtsi"
|
|
|
|
/ {
|
|
model = "Eukrea CPUIMX27";
|
|
compatible = "eukrea,cpuimx27", "fsl,imx27";
|
|
|
|
memory {
|
|
reg = <0xa0000000 0x04000000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "simple-bus";
|
|
|
|
clk14745600: clock@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <14745600>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pcf8563@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
&nfc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nfc>;
|
|
nand-bus-width = <8>;
|
|
nand-ecc-mode = "hw";
|
|
nand-on-flash-bbt;
|
|
status = "okay";
|
|
};
|
|
|
|
&owire {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_owire>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdhc2>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh2>;
|
|
dr_mode = "host";
|
|
phy_type = "ulpi";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
dr_mode = "otg";
|
|
phy_type = "ulpi";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&weim {
|
|
status = "okay";
|
|
|
|
nor: nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0 0x00000000 0x04000000>;
|
|
bank-width = <2>;
|
|
linux,mtd-name = "physmap-flash.0";
|
|
fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
|
|
};
|
|
|
|
uart8250@3,200000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart8250_1>;
|
|
compatible = "ns8250";
|
|
clocks = <&clk14745600>;
|
|
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
|
|
interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <3 0x200000 0x1000>;
|
|
reg-shift = <1>;
|
|
reg-io-width = <1>;
|
|
no-loopback-test;
|
|
};
|
|
|
|
uart8250@3,400000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart8250_2>;
|
|
compatible = "ns8250";
|
|
clocks = <&clk14745600>;
|
|
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
|
|
interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <3 0x400000 0x1000>;
|
|
reg-shift = <1>;
|
|
reg-io-width = <1>;
|
|
no-loopback-test;
|
|
};
|
|
|
|
uart8250@3,800000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart8250_3>;
|
|
compatible = "ns8250";
|
|
clocks = <&clk14745600>;
|
|
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
|
|
interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <3 0x800000 0x1000>;
|
|
reg-shift = <1>;
|
|
reg-io-width = <1>;
|
|
no-loopback-test;
|
|
};
|
|
|
|
uart8250@3,1000000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart8250_4>;
|
|
compatible = "ns8250";
|
|
clocks = <&clk14745600>;
|
|
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
|
|
interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <3 0x1000000 0x1000>;
|
|
reg-shift = <1>;
|
|
reg-io-width = <1>;
|
|
no-loopback-test;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
imx27-eukrea-cpuimx27 {
|
|
pinctrl_fec: fecgrp {
|
|
fsl,pins = <
|
|
MX27_PAD_SD3_CMD__FEC_TXD0 0x0
|
|
MX27_PAD_SD3_CLK__FEC_TXD1 0x0
|
|
MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
|
|
MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
|
|
MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
|
|
MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
|
|
MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
|
|
MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
|
|
MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
|
|
MX27_PAD_ATA_DATA7__FEC_MDC 0x0
|
|
MX27_PAD_ATA_DATA8__FEC_CRS 0x0
|
|
MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
|
|
MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
|
|
MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
|
|
MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
|
|
MX27_PAD_ATA_DATA13__FEC_COL 0x0
|
|
MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
|
|
MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX27_PAD_I2C_DATA__I2C_DATA 0x0
|
|
MX27_PAD_I2C_CLK__I2C_CLK 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_nfc: nfcgrp {
|
|
fsl,pins = <
|
|
MX27_PAD_NFRB__NFRB 0x0
|
|
MX27_PAD_NFCLE__NFCLE 0x0
|
|
MX27_PAD_NFWP_B__NFWP_B 0x0
|
|
MX27_PAD_NFCE_B__NFCE_B 0x0
|
|
MX27_PAD_NFALE__NFALE 0x0
|
|
MX27_PAD_NFRE_B__NFRE_B 0x0
|
|
MX27_PAD_NFWE_B__NFWE_B 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_owire: owiregrp {
|
|
fsl,pins = <
|
|
MX27_PAD_RTCK__OWIRE 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_sdhc2: sdhc2grp {
|
|
fsl,pins = <
|
|
MX27_PAD_SD2_CLK__SD2_CLK 0x0
|
|
MX27_PAD_SD2_CMD__SD2_CMD 0x0
|
|
MX27_PAD_SD2_D0__SD2_D0 0x0
|
|
MX27_PAD_SD2_D1__SD2_D1 0x0
|
|
MX27_PAD_SD2_D2__SD2_D2 0x0
|
|
MX27_PAD_SD2_D3__SD2_D3 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4: uart4grp {
|
|
fsl,pins = <
|
|
MX27_PAD_USBH1_TXDM__UART4_TXD 0x0
|
|
MX27_PAD_USBH1_RXDP__UART4_RXD 0x0
|
|
MX27_PAD_USBH1_TXDP__UART4_CTS 0x0
|
|
MX27_PAD_USBH1_FS__UART4_RTS 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart8250_1: uart82501grp {
|
|
fsl,pins = <
|
|
MX27_PAD_USB_PWR__GPIO2_23 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart8250_2: uart82502grp {
|
|
fsl,pins = <
|
|
MX27_PAD_USBH1_SUSP__GPIO2_22 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart8250_3: uart82503grp {
|
|
fsl,pins = <
|
|
MX27_PAD_USBH1_OE_B__GPIO2_27 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart8250_4: uart82504grp {
|
|
fsl,pins = <
|
|
MX27_PAD_USBH1_RXDM__GPIO2_30 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh2: usbh2grp {
|
|
fsl,pins = <
|
|
MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
|
|
MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
|
|
MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
|
|
MX27_PAD_USBH2_STP__USBH2_STP 0x0
|
|
MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
|
|
MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
|
|
MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
|
|
MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
|
|
MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
|
|
MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
|
|
MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
|
|
MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
|
|
MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
|
|
MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
|
|
MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
|
|
MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
|
|
MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
|
|
MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
|
|
MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
|
|
MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
|
|
MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
|
|
MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
|
|
MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
|
|
>;
|
|
};
|
|
};
|
|
};
|