mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
b4cf33e96a
Fix invalid GIC interrupt flags - type IRQ_TYPE_NONE is not allowed for GIC interrupts. Although this was working but with error messages like: genirq: Setting trigger mode 0 for irq 16 failed Use level high interrupt instead of type none. The choice of level high was rather an arbitrary decision hoping it will work on each platform. Tests shown no issues so far. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJYLvYLAAoJEME3ZuaGi4PX7FYP/RUWX+IGk5xZg9xsi/VBN5wg IDOseVLPTiz5VxgU1CvCMAxAbdshlPrrn6jgfmj0IRmF5g+9RfjpS6y3X+YIELUA hD7altzN75JzY9rV4BhnHeFaRBK53gTeno+4O2hDarew6dRN4A2UtMTFpgGav9S/ T3vgIrsAXq7vrtnT9dePja0WISzl7l0JgzByTKEtu3egoy6wl20hrslGSJI+sWmt Mu969g50RJsbrinzhv2qAYqN9AYuDSHUo8KVUJ2mg0ow9zkeJ/AeHlB4zuUK8dUf dPW9tVtQDrcl6sA4wqG4Tno2JjJHqnJNBvE3KOnxqWd/ed7Mz7Pddrc4AaqB5o5l GDZxzAx2xb+rX+dWwURVXAtS54RUnD8e1S7Jp8X2+eCL8OUKXvfO6p/XA45/8V/S 9VJNP/gUL594Zyyj5LuAhqyOfbtcrW2VaZntts68NVjhtYfRcHF8UrxGtj6RxZnH mOZC5HNBNIxrpzI+YfSiTCk0ec1CRFtbqC0sMIJoC2DJ+IGint2UPz8VOFMJrZlw 0zVXCr0NKHCgvJqPIV24udyzPq79REfdsElZQYyl6GDYGXAqTJLR+OP6/Sc/MNv5 c1uObjQLd/Yi7e9BhqHF60t9s+y3whmqnvOibTEsnRX145VaPBnfwomc1XU9PVIn YdK2ml1FgIGdZNZ5dPxy =lyeE -----END PGP SIGNATURE----- Merge tag 'samsung-dt-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Topic branch with DT changes for v4.10. Fix invalid GIC interrupt flags - type IRQ_TYPE_NONE is not allowed for GIC interrupts. Although this was working but with error messages like: genirq: Setting trigger mode 0 for irq 16 failed Use level high interrupt instead of type none. The choice of level high was rather an arbitrary decision hoping it will work on each platform. Tests shown no issues so far. * tag 'samsung-dt-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4 Signed-off-by: Olof Johansson <olof@lixom.net>
1011 lines
26 KiB
Plaintext
1011 lines
26 KiB
Plaintext
/*
|
|
* Samsung's Exynos4 SoC series common device tree source
|
|
*
|
|
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
* Copyright (c) 2010-2011 Linaro Ltd.
|
|
* www.linaro.org
|
|
*
|
|
* Samsung's Exynos4 SoC series device nodes are listed in this file. Particular
|
|
* SoCs from Exynos4 series can include this file and provide values for SoCs
|
|
* specfic bindings.
|
|
*
|
|
* Note: This file does not include device nodes for all the controllers in
|
|
* Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
|
|
* nodes can be added to this file.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/exynos4.h>
|
|
#include <dt-bindings/clock/exynos-audss-clk.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include "exynos-syscon-restart.dtsi"
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
spi0 = &spi_0;
|
|
spi1 = &spi_1;
|
|
spi2 = &spi_2;
|
|
i2c0 = &i2c_0;
|
|
i2c1 = &i2c_1;
|
|
i2c2 = &i2c_2;
|
|
i2c3 = &i2c_3;
|
|
i2c4 = &i2c_4;
|
|
i2c5 = &i2c_5;
|
|
i2c6 = &i2c_6;
|
|
i2c7 = &i2c_7;
|
|
i2c8 = &i2c_8;
|
|
csis0 = &csis_0;
|
|
csis1 = &csis_1;
|
|
fimc0 = &fimc_0;
|
|
fimc1 = &fimc_1;
|
|
fimc2 = &fimc_2;
|
|
fimc3 = &fimc_3;
|
|
serial0 = &serial_0;
|
|
serial1 = &serial_1;
|
|
serial2 = &serial_2;
|
|
serial3 = &serial_3;
|
|
};
|
|
|
|
clock_audss: clock-controller@03810000 {
|
|
compatible = "samsung,exynos4210-audss-clock";
|
|
reg = <0x03810000 0x0C>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
i2s0: i2s@03830000 {
|
|
compatible = "samsung,s5pv210-i2s";
|
|
reg = <0x03830000 0x100>;
|
|
clocks = <&clock_audss EXYNOS_I2S_BUS>;
|
|
clock-names = "iis";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "i2s_cdclk0";
|
|
dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
|
|
dma-names = "tx", "rx", "tx-sec";
|
|
samsung,idma-addr = <0x03000000>;
|
|
#sound-dai-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
chipid@10000000 {
|
|
compatible = "samsung,exynos4210-chipid";
|
|
reg = <0x10000000 0x100>;
|
|
};
|
|
|
|
scu: snoop-control-unit@10500000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0x10500000 0x2000>;
|
|
};
|
|
|
|
memory-controller@12570000 {
|
|
compatible = "samsung,exynos4210-srom";
|
|
reg = <0x12570000 0x14>;
|
|
};
|
|
|
|
mipi_phy: video-phy {
|
|
compatible = "samsung,s5pv210-mipi-video-phy";
|
|
#phy-cells = <1>;
|
|
syscon = <&pmu_system_controller>;
|
|
};
|
|
|
|
pd_mfc: mfc-power-domain@10023C40 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C40 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_g3d: g3d-power-domain@10023C60 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C60 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_lcd0: lcd0-power-domain@10023C80 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C80 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_tv: tv-power-domain@10023C20 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C20 0x20>;
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&pd_lcd0>;
|
|
};
|
|
|
|
pd_cam: cam-power-domain@10023C00 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C00 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_gps: gps-power-domain@10023CE0 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023CE0 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_gps_alive: gps-alive-power-domain@10023D00 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023D00 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
gic: interrupt-controller@10490000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
|
|
};
|
|
|
|
combiner: interrupt-controller@10440000 {
|
|
compatible = "samsung,exynos4210-combiner";
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
reg = <0x10440000 0x1000>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <2 2>, <3 2>;
|
|
};
|
|
|
|
sys_reg: syscon@10010000 {
|
|
compatible = "samsung,exynos4-sysreg", "syscon";
|
|
reg = <0x10010000 0x400>;
|
|
};
|
|
|
|
pmu_system_controller: system-controller@10020000 {
|
|
compatible = "samsung,exynos4210-pmu", "syscon";
|
|
reg = <0x10020000 0x4000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
dsi_0: dsi@11C80000 {
|
|
compatible = "samsung,exynos4210-mipi-dsi";
|
|
reg = <0x11C80000 0x10000>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_lcd0>;
|
|
phys = <&mipi_phy 1>;
|
|
phy-names = "dsim";
|
|
clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
|
|
clock-names = "bus_clk", "sclk_mipi";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
camera {
|
|
compatible = "samsung,fimc", "simple-bus";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "cam_a_clkout", "cam_b_clkout";
|
|
ranges;
|
|
|
|
fimc_0: fimc@11800000 {
|
|
compatible = "samsung,exynos4210-fimc";
|
|
reg = <0x11800000 0x1000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
|
|
clock-names = "fimc", "sclk_fimc";
|
|
power-domains = <&pd_cam>;
|
|
samsung,sysreg = <&sys_reg>;
|
|
iommus = <&sysmmu_fimc0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fimc_1: fimc@11810000 {
|
|
compatible = "samsung,exynos4210-fimc";
|
|
reg = <0x11810000 0x1000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
|
|
clock-names = "fimc", "sclk_fimc";
|
|
power-domains = <&pd_cam>;
|
|
samsung,sysreg = <&sys_reg>;
|
|
iommus = <&sysmmu_fimc1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fimc_2: fimc@11820000 {
|
|
compatible = "samsung,exynos4210-fimc";
|
|
reg = <0x11820000 0x1000>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
|
|
clock-names = "fimc", "sclk_fimc";
|
|
power-domains = <&pd_cam>;
|
|
samsung,sysreg = <&sys_reg>;
|
|
iommus = <&sysmmu_fimc2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fimc_3: fimc@11830000 {
|
|
compatible = "samsung,exynos4210-fimc";
|
|
reg = <0x11830000 0x1000>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
|
|
clock-names = "fimc", "sclk_fimc";
|
|
power-domains = <&pd_cam>;
|
|
samsung,sysreg = <&sys_reg>;
|
|
iommus = <&sysmmu_fimc3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
csis_0: csis@11880000 {
|
|
compatible = "samsung,exynos4210-csis";
|
|
reg = <0x11880000 0x4000>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
|
|
clock-names = "csis", "sclk_csis";
|
|
bus-width = <4>;
|
|
power-domains = <&pd_cam>;
|
|
phys = <&mipi_phy 0>;
|
|
phy-names = "csis";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
csis_1: csis@11890000 {
|
|
compatible = "samsung,exynos4210-csis";
|
|
reg = <0x11890000 0x4000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
|
|
clock-names = "csis", "sclk_csis";
|
|
bus-width = <2>;
|
|
power-domains = <&pd_cam>;
|
|
phys = <&mipi_phy 2>;
|
|
phy-names = "csis";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
watchdog: watchdog@10060000 {
|
|
compatible = "samsung,s3c2410-wdt";
|
|
reg = <0x10060000 0x100>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_WDT>;
|
|
clock-names = "watchdog";
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc: rtc@10070000 {
|
|
compatible = "samsung,s3c6410-rtc";
|
|
reg = <0x10070000 0x100>;
|
|
interrupt-parent = <&pmu_system_controller>;
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_RTC>;
|
|
clock-names = "rtc";
|
|
status = "disabled";
|
|
};
|
|
|
|
keypad: keypad@100A0000 {
|
|
compatible = "samsung,s5pv210-keypad";
|
|
reg = <0x100A0000 0x100>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_KEYIF>;
|
|
clock-names = "keypad";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci_0: sdhci@12510000 {
|
|
compatible = "samsung,exynos4210-sdhci";
|
|
reg = <0x12510000 0x100>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
|
|
clock-names = "hsmmc", "mmc_busclk.2";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci_1: sdhci@12520000 {
|
|
compatible = "samsung,exynos4210-sdhci";
|
|
reg = <0x12520000 0x100>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
|
|
clock-names = "hsmmc", "mmc_busclk.2";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci_2: sdhci@12530000 {
|
|
compatible = "samsung,exynos4210-sdhci";
|
|
reg = <0x12530000 0x100>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
|
|
clock-names = "hsmmc", "mmc_busclk.2";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci_3: sdhci@12540000 {
|
|
compatible = "samsung,exynos4210-sdhci";
|
|
reg = <0x12540000 0x100>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
|
|
clock-names = "hsmmc", "mmc_busclk.2";
|
|
status = "disabled";
|
|
};
|
|
|
|
exynos_usbphy: exynos-usbphy@125B0000 {
|
|
compatible = "samsung,exynos4210-usb2-phy";
|
|
reg = <0x125B0000 0x100>;
|
|
samsung,pmureg-phandle = <&pmu_system_controller>;
|
|
clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
|
|
clock-names = "phy", "ref";
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hsotg: hsotg@12480000 {
|
|
compatible = "samsung,s3c6400-hsotg";
|
|
reg = <0x12480000 0x20000>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_USB_DEVICE>;
|
|
clock-names = "otg";
|
|
phys = <&exynos_usbphy 0>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: ehci@12580000 {
|
|
compatible = "samsung,exynos4210-ehci";
|
|
reg = <0x12580000 0x100>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_USB_HOST>;
|
|
clock-names = "usbhost";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&exynos_usbphy 1>;
|
|
status = "disabled";
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
phys = <&exynos_usbphy 2>;
|
|
status = "disabled";
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
phys = <&exynos_usbphy 3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
ohci: ohci@12590000 {
|
|
compatible = "samsung,exynos4210-ohci";
|
|
reg = <0x12590000 0x100>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_USB_HOST>;
|
|
clock-names = "usbhost";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&exynos_usbphy 1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
i2s1: i2s@13960000 {
|
|
compatible = "samsung,s3c6410-i2s";
|
|
reg = <0x13960000 0x100>;
|
|
clocks = <&clock CLK_I2S1>;
|
|
clock-names = "iis";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "i2s_cdclk1";
|
|
dmas = <&pdma1 12>, <&pdma1 11>;
|
|
dma-names = "tx", "rx";
|
|
#sound-dai-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: i2s@13970000 {
|
|
compatible = "samsung,s3c6410-i2s";
|
|
reg = <0x13970000 0x100>;
|
|
clocks = <&clock CLK_I2S2>;
|
|
clock-names = "iis";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "i2s_cdclk2";
|
|
dmas = <&pdma0 14>, <&pdma0 13>;
|
|
dma-names = "tx", "rx";
|
|
#sound-dai-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mfc: codec@13400000 {
|
|
compatible = "samsung,mfc-v5";
|
|
reg = <0x13400000 0x10000>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_mfc>;
|
|
clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
|
|
clock-names = "mfc", "sclk_mfc";
|
|
iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
|
|
iommu-names = "left", "right";
|
|
};
|
|
|
|
serial_0: serial@13800000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13800000 0x100>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
dmas = <&pdma0 15>, <&pdma0 16>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
serial_1: serial@13810000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13810000 0x100>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
dmas = <&pdma1 15>, <&pdma1 16>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
serial_2: serial@13820000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13820000 0x100>;
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
dmas = <&pdma0 17>, <&pdma0 18>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
serial_3: serial@13830000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13830000 0x100>;
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
dmas = <&pdma1 17>, <&pdma1 18>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_0: i2c@13860000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13860000 0x100>;
|
|
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C0>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_1: i2c@13870000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13870000 0x100>;
|
|
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C1>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_2: i2c@13880000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13880000 0x100>;
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C2>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_3: i2c@13890000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13890000 0x100>;
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C3>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_4: i2c@138A0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138A0000 0x100>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C4>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_5: i2c@138B0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138B0000 0x100>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C5>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_6: i2c@138C0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138C0000 0x100>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C6>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_7: i2c@138D0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138D0000 0x100>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C7>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c7_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_8: i2c@138E0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-hdmiphy-i2c";
|
|
reg = <0x138E0000 0x100>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_I2C_HDMI>;
|
|
clock-names = "i2c";
|
|
status = "disabled";
|
|
|
|
hdmi_i2c_phy: hdmiphy@38 {
|
|
compatible = "exynos4210-hdmiphy";
|
|
reg = <0x38>;
|
|
};
|
|
};
|
|
|
|
spi_0: spi@13920000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x13920000 0x100>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&pdma0 7>, <&pdma0 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_1: spi@13930000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x13930000 0x100>;
|
|
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&pdma1 7>, <&pdma1 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_2: spi@13940000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x13940000 0x100>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&pdma0 9>, <&pdma0 8>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@139D0000 {
|
|
compatible = "samsung,exynos4210-pwm";
|
|
reg = <0x139D0000 0x1000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_PWM>;
|
|
clock-names = "timers";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
amba {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
pdma0: pdma@12680000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x12680000 0x1000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_PDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
pdma1: pdma@12690000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x12690000 0x1000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_PDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
mdma1: mdma@12850000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x12850000 0x1000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_MDMA>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
};
|
|
};
|
|
|
|
fimd: fimd@11c00000 {
|
|
compatible = "samsung,exynos4210-fimd";
|
|
interrupt-parent = <&combiner>;
|
|
reg = <0x11c00000 0x20000>;
|
|
interrupt-names = "fifo", "vsync", "lcd_sys";
|
|
interrupts = <11 0>, <11 1>, <11 2>;
|
|
clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
|
|
clock-names = "sclk_fimd", "fimd";
|
|
power-domains = <&pd_lcd0>;
|
|
iommus = <&sysmmu_fimd0>;
|
|
samsung,sysreg = <&sys_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tmu: tmu@100C0000 {
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
jpeg_codec: jpeg-codec@11840000 {
|
|
compatible = "samsung,exynos4210-jpeg";
|
|
reg = <0x11840000 0x1000>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_JPEG>;
|
|
clock-names = "jpeg";
|
|
power-domains = <&pd_cam>;
|
|
iommus = <&sysmmu_jpeg>;
|
|
};
|
|
|
|
rotator: rotator@12810000 {
|
|
compatible = "samsung,exynos4210-rotator";
|
|
reg = <0x12810000 0x64>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_ROTATOR>;
|
|
clock-names = "rotator";
|
|
iommus = <&sysmmu_rotator>;
|
|
};
|
|
|
|
hdmi: hdmi@12D00000 {
|
|
compatible = "samsung,exynos4210-hdmi";
|
|
reg = <0x12D00000 0x70000>;
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
|
|
"mout_hdmi";
|
|
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
|
|
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
|
|
<&clock CLK_MOUT_HDMI>;
|
|
phy = <&hdmi_i2c_phy>;
|
|
power-domains = <&pd_tv>;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmicec: cec@100B0000 {
|
|
compatible = "samsung,s5p-cec";
|
|
reg = <0x100B0000 0x200>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_HDMI_CEC>;
|
|
clock-names = "hdmicec";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_cec>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mixer: mixer@12C10000 {
|
|
compatible = "samsung,exynos4210-mixer";
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
|
|
power-domains = <&pd_tv>;
|
|
iommus = <&sysmmu_tv>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_dmc0: ppmu_dmc0@106a0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x106a0000 0x2000>;
|
|
clocks = <&clock CLK_PPMUDMC0>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_dmc1: ppmu_dmc1@106b0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x106b0000 0x2000>;
|
|
clocks = <&clock CLK_PPMUDMC1>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_cpu: ppmu_cpu@106c0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x106c0000 0x2000>;
|
|
clocks = <&clock CLK_PPMUCPU>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_acp: ppmu_acp@10ae0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x106e0000 0x2000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_rightbus: ppmu_rightbus@112a0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x112a0000 0x2000>;
|
|
clocks = <&clock CLK_PPMURIGHT>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_leftbus: ppmu_leftbus0@116a0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x116a0000 0x2000>;
|
|
clocks = <&clock CLK_PPMULEFT>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_camif: ppmu_camif@11ac0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x11ac0000 0x2000>;
|
|
clocks = <&clock CLK_PPMUCAMIF>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_lcd0: ppmu_lcd0@11e40000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x11e40000 0x2000>;
|
|
clocks = <&clock CLK_PPMULCD0>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_fsys: ppmu_g3d@12630000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x12630000 0x2000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_image: ppmu_image@12aa0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x12aa0000 0x2000>;
|
|
clocks = <&clock CLK_PPMUIMAGE>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_tv: ppmu_tv@12e40000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x12e40000 0x2000>;
|
|
clocks = <&clock CLK_PPMUTV>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_g3d: ppmu_g3d@13220000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x13220000 0x2000>;
|
|
clocks = <&clock CLK_PPMUG3D>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_mfc_left: ppmu_mfc_left@13660000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x13660000 0x2000>;
|
|
clocks = <&clock CLK_PPMUMFC_L>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_mfc_right: ppmu_mfc_right@13670000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x13670000 0x2000>;
|
|
clocks = <&clock CLK_PPMUMFC_R>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
sysmmu_mfc_l: sysmmu@13620000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13620000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 5>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
|
|
power-domains = <&pd_mfc>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_mfc_r: sysmmu@13630000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13630000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 6>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
|
|
power-domains = <&pd_mfc>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_tv: sysmmu@12E20000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x12E20000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 4>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
|
|
power-domains = <&pd_tv>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc0: sysmmu@11A20000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11A20000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
|
|
power-domains = <&pd_cam>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc1: sysmmu@11A30000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11A30000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 3>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
|
|
power-domains = <&pd_cam>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc2: sysmmu@11A40000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11A40000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 4>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
|
|
power-domains = <&pd_cam>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc3: sysmmu@11A50000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11A50000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 5>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
|
|
power-domains = <&pd_cam>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_jpeg: sysmmu@11A60000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11A60000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 6>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
|
|
power-domains = <&pd_cam>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_rotator: sysmmu@12A30000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x12A30000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimd0: sysmmu@11E20000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11E20000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
|
|
power-domains = <&pd_lcd0>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sss: sss@10830000 {
|
|
compatible = "samsung,exynos4210-secss";
|
|
reg = <0x10830000 0x300>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_SSS>;
|
|
clock-names = "secss";
|
|
};
|
|
|
|
prng: rng@10830400 {
|
|
compatible = "samsung,exynos4-rng";
|
|
reg = <0x10830400 0x200>;
|
|
clocks = <&clock CLK_SSS>;
|
|
clock-names = "secss";
|
|
};
|
|
};
|