korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-05 01:54:09 +08:00
Code Issues Packages Projects Releases Wiki Activity
2bde888015
linux/arch/arm/boot/dts/at91rm9200.dtsi
Sylvain Rochet 138c2b2f17 ARM: dts: at91: fixes dbgu pinctrl, set pullup on rx, clear pullup on tx 
Remove pullup on dbgu DTXD signal, it is a push-pull output thus the
pullup is pointless.

Add pullup on dbgu DRXD signal, it prevents the DRXD signal to be left
floating and so consuming a useless extra amount of power in crowbarred
state if nothing is externally connected to dbgu.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20 17:37:18 +02:00

966 lines
25 KiB
Plaintext
Raw Blame History

/*
* at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
*
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
* 2012 Joachim Eastwood <manabian@gmail.com>
*
* Based on at91sam9260.dtsi
*
* Licensed under GPLv2 or later.
*/
#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91RM9200 family SoC";
compatible = "atmel,at91rm9200";
interrupt-parent = <&aic>;
aliases {
serial0 = &dbgu;
serial1 = &usart0;
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
gpio3 = &pioD;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
ssc0 = &ssc0;
ssc1 = &ssc1;
ssc2 = &ssc2;
};
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm920t";
device_type = "cpu";
};
};
memory {
reg = <0x20000000 0x04000000>;
};
clocks {
slow_xtal: slow_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
main_xtal: main_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
sram: sram@00200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x4000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
aic: interrupt-controller@fffff000 {
#interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
atmel,external-irqs = <25 26 27 28 29 30 31>;
};
ramc0: ramc@ffffff00 {
compatible = "atmel,at91rm9200-sdramc", "syscon";
reg = <0xffffff00 0x100>;
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
main_osc: main_osc {
compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
clocks = <&main_osc>;
};
plla: pllack {
compatible = "atmel,at91rm9200-clk-pll";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_LOCKA>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <1000000 32000000>;
#atmel,pll-clk-output-range-cells = <3>;
atmel,pll-clk-output-ranges = <80000000 160000000 0>,
<150000000 180000000 2>;
};
pllb: pllbck {
compatible = "atmel,at91rm9200-clk-pll";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_LOCKB>;
clocks = <&main>;
reg = <1>;
atmel,clk-input-range = <1000000 32000000>;
#atmel,pll-clk-output-range-cells = <3>;
atmel,pll-clk-output-ranges = <80000000 160000000 0>,
<150000000 180000000 2>;
};
mck: masterck {
compatible = "atmel,at91rm9200-clk-master";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
atmel,clk-output-range = <0 80000000>;
atmel,clk-divisors = <1 2 3 4>;
};
usb: usbck {
compatible = "atmel,at91rm9200-clk-usb";
#clock-cells = <0>;
atmel,clk-divisors = <1 2 0 0>;
clocks = <&pllb>;
};
prog: progck {
compatible = "atmel,at91rm9200-clk-programmable";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
prog0: prog0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <AT91_PMC_PCKRDY(0)>;
};
prog1: prog1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <AT91_PMC_PCKRDY(1)>;
};
prog2: prog2 {
#clock-cells = <0>;
reg = <2>;
interrupts = <AT91_PMC_PCKRDY(2)>;
};
prog3: prog3 {
#clock-cells = <0>;
reg = <3>;
interrupts = <AT91_PMC_PCKRDY(3)>;
};
};
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
udpck: udpck {
#clock-cells = <0>;
reg = <2>;
clocks = <&usb>;
};
uhpck: uhpck {
#clock-cells = <0>;
reg = <4>;
clocks = <&usb>;
};
pck0: pck0 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
pck1: pck1 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
};
pck2: pck2 {
#clock-cells = <0>;
reg = <10>;
clocks = <&prog2>;
};
pck3: pck3 {
#clock-cells = <0>;
reg = <11>;
clocks = <&prog3>;
};
};
periphck {
compatible = "atmel,at91rm9200-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
pioA_clk: pioA_clk {
#clock-cells = <0>;
reg = <2>;
};
pioB_clk: pioB_clk {
#clock-cells = <0>;
reg = <3>;
};
pioC_clk: pioC_clk {
#clock-cells = <0>;
reg = <4>;
};
pioD_clk: pioD_clk {
#clock-cells = <0>;
reg = <5>;
};
usart0_clk: usart0_clk {
#clock-cells = <0>;
reg = <6>;
};
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <7>;
};
usart2_clk: usart2_clk {
#clock-cells = <0>;
reg = <8>;
};
usart3_clk: usart3_clk {
#clock-cells = <0>;
reg = <9>;
};
mci0_clk: mci0_clk {
#clock-cells = <0>;
reg = <10>;
};
udc_clk: udc_clk {
#clock-cells = <0>;
reg = <11>;
};
twi0_clk: twi0_clk {
reg = <12>;
#clock-cells = <0>;
};
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <13>;
};
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <14>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <15>;
};
ssc2_clk: ssc2_clk {
#clock-cells = <0>;
reg = <16>;
};
tc0_clk: tc0_clk {
#clock-cells = <0>;
reg = <17>;
};
tc1_clk: tc1_clk {
#clock-cells = <0>;
reg = <18>;
};
tc2_clk: tc2_clk {
#clock-cells = <0>;
reg = <19>;
};
tc3_clk: tc3_clk {
#clock-cells = <0>;
reg = <20>;
};
tc4_clk: tc4_clk {
#clock-cells = <0>;
reg = <21>;
};
tc5_clk: tc5_clk {
#clock-cells = <0>;
reg = <22>;
};
ohci_clk: ohci_clk {
#clock-cells = <0>;
reg = <23>;
};
macb0_clk: macb0_clk {
#clock-cells = <0>;
reg = <24>;
};
};
};
st: timer@fffffd00 {
compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
reg = <0xfffffd00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&slow_xtal>;
watchdog {
compatible = "atmel,at91rm9200-wdt";
};
};
rtc: rtc@fffffe00 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffe00 0x40>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&slow_xtal>;
status = "disabled";
};
tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
tcb1: timer@fffa4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa4000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
i2c0: i2c@fffb8000 {
compatible = "atmel,at91rm9200-i2c";
reg = <0xfffb8000 0x4000>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>;
clocks = <&twi0_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mmc0: mmc@fffb4000 {
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&mci0_clk>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
status = "disabled";
};
ssc0: ssc@fffd0000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd0000 0x4000>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&ssc0_clk>;
clock-names = "pclk";
status = "disabled";
};
ssc1: ssc@fffd4000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd4000 0x4000>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&ssc1_clk>;
clock-names = "pclk";
status = "disabled";
};
ssc2: ssc@fffd8000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd8000 0x4000>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
clocks = <&ssc2_clk>;
clock-names = "pclk";
status = "disabled";
};
macb0: ethernet@fffbc000 {
compatible = "cdns,at91rm9200-emac", "cdns,emac";
reg = <0xfffbc000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
clocks = <&macb0_clk>;
clock-names = "ether_clk";
status = "disabled";
};
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask = <
/* A B */
0xffffffff 0xffffffff /* pioA */
0xffffffff 0x083fffff /* pioB */
0xffff3fff 0x00000000 /* pioC */
0x03ff87ff 0x0fffff80 /* pioD */
>;
/* shared pinctrl settings */
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */
};
pinctrl_uart0_cts: uart0_cts-0 {
atmel,pins =
<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */
};
pinctrl_uart0_rts: uart0_rts-0 {
atmel,pins =
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */
AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */
};
pinctrl_uart1_rts: uart1_rts-0 {
atmel,pins =
<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB24 periph A */
};
pinctrl_uart1_cts: uart1_cts-0 {
atmel,pins =
<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */
};
pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
atmel,pins =
<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */
AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */
};
pinctrl_uart1_dcd: uart1_dcd-0 {
atmel,pins =
<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */
};
pinctrl_uart1_ri: uart1_ri-0 {
atmel,pins =
<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
};
};
uart2 {
pinctrl_uart2: uart2-0 {
atmel,pins =
<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */
AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */
};
pinctrl_uart2_rts: uart2_rts-0 {
atmel,pins =
<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
};
pinctrl_uart2_cts: uart2_cts-0 {
atmel,pins =
<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA31 periph B */
};
};
uart3 {
pinctrl_uart3: uart3-0 {
atmel,pins =
<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */
AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */
};
pinctrl_uart3_rts: uart3_rts-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
};
pinctrl_uart3_cts: uart3_cts-0 {
atmel,pins =
<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
};
};
nand {
pinctrl_nand: nand-0 {
atmel,pins =
<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC2 gpio RDY pin pull_up */
AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PB1 gpio CD pin pull_up */
};
};
macb {
pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins =
<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A */
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A */
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */
AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA16 periph A */
};
pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins =
<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB12 periph B */
AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB13 periph B */
AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B */
AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB15 periph B */
AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB16 periph B */
AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB17 periph B */
AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB18 periph B */
AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB19 periph B */
};
};
mmc0 {
pinctrl_mmc0_clk: mmc0_clk-0 {
atmel,pins =
<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */
};
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
atmel,pins =
<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */
AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA29 periph A with pullup */
};
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins =
<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB3 periph B with pullup */
AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB4 periph B with pullup */
AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PB5 periph B with pullup */
};
pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
atmel,pins =
<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA8 periph B with pullup */
AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA9 periph B with pullup */
};
pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
atmel,pins =
<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA10 periph B with pullup */
AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */
AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA12 periph B with pullup */
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */
AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
};
};
ssc2 {
pinctrl_ssc2_tx: ssc2_tx-0 {
atmel,pins =
<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A */
};
pinctrl_ssc2_rx: ssc2_rx-0 {
atmel,pins =
<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
};
};
twi {
pinctrl_twi: twi-0 {
atmel,pins =
<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* PA25 periph A with multi drive */
AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* PA26 periph A with multi drive */
};
pinctrl_twi_gpio: twi_gpio-0 {
atmel,pins =
<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA25 GPIO with multi drive */
AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA26 GPIO with multi drive */
};
};
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
tcb1 {
pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioC_clk>;
};
pioD: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioD_clk>;
};
};
dbgu: serial@fffff200 {
compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&mck>;
clock-names = "usart";
status = "disabled";
};
usart0: serial@fffc0000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffc0000 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&usart0_clk>;
clock-names = "usart";
status = "disabled";
};
usart1: serial@fffc4000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffc4000 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&usart1_clk>;
clock-names = "usart";
status = "disabled";
};
usart2: serial@fffc8000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffc8000 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&usart2_clk>;
clock-names = "usart";
status = "disabled";
};
usart3: serial@fffcc000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffcc000 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&usart3_clk>;
clock-names = "usart";
status = "disabled";
};
usb1: gadget@fffb0000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk";
status = "disabled";
};
spi0: spi@fffe0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffe0000 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&spi0_clk>;
clock-names = "spi_clk";
status = "disabled";
};
};
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
nand-ecc-mode = "soft";
gpios = <&pioC 2 GPIO_ACTIVE_HIGH
0
&pioB 1 GPIO_ACTIVE_HIGH
>;
status = "disabled";
};
usb0: ohci@00300000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
&pioA 26 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi_gpio>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
Reference in New Issue View Git Blame Copy Permalink