linux/sound/firewire/Kconfig
Takashi Sakamoto a91f676074 ALSA: fireface: add support for Fireface 800 with MIDI functionality only
Fireface 800 is a flagship model of RME GmbH for audio and music units
on IEEE 1394 bus, shipped 2004. This model consists of four chips:
 - TI TSB81BA3D for physical layer on cable environment of EEE 1394 bus
 - TI TSB82AA2 for link layer for 1394 OHCI bus bridge to PCI bus
 - Xilinx Spartan-3 FPGA XC3S400
 - Xilinx High-Performance CPLD XC9572XL

This commit adds support Fireface 800. In this time, the support is
restricted to its MIDI functionality, thus this commit adds some
condition statements to avoid touching streaming functionality.

Unlike Fireface 400, Fireface 800 has no functionality to suppress
asynchronous transactions for MIDI messages except for unregister of
listen address in controller side, thus the feature is available as is.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-11 14:58:01 +01:00

168 lines
4.8 KiB
Plaintext

menuconfig SND_FIREWIRE
bool "FireWire sound devices"
depends on FIREWIRE
default y
help
Support for IEEE-1394/FireWire/iLink sound devices.
if SND_FIREWIRE && FIREWIRE
config SND_FIREWIRE_LIB
tristate
select SND_PCM
select SND_RAWMIDI
config SND_DICE
tristate "DICE-based DACs support"
select SND_HWDEP
select SND_FIREWIRE_LIB
help
Say Y here to include support for many DACs based on the DICE
chip family (DICE-II/Jr/Mini) which TC Applied Technologies produces.
To compile this driver as a module, choose M here: the module
will be called snd-dice.
config SND_OXFW
tristate "Oxford Semiconductor FW970/971 chipset support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based on
Oxford Semiconductor FW970/971 chipset.
* Griffin Firewave
* LaCie Firewire Speakers
* Behringer F-Control Audio 202
* Mackie(Loud) Onyx-i series (former models)
* Mackie(Loud) Onyx 1640i (former model)
* Mackie(Loud) Onyx Satellite
* Mackie(Loud) Tapco Link.Firewire
* Mackie(Loud) d.2 pro/d.4 pro
* Mackie(Loud) U.420/U.420d
* TASCAM FireOne
* Stanton Controllers & Systems 1 Deck/Mixer
* APOGEE duet FireWire
To compile this driver as a module, choose M here: the module
will be called snd-oxfw.
config SND_ISIGHT
tristate "Apple iSight microphone"
select SND_FIREWIRE_LIB
help
Say Y here to include support for the front and rear microphones
of the Apple iSight web camera.
To compile this driver as a module, choose M here: the module
will be called snd-isight.
config SND_FIREWORKS
tristate "Echo Fireworks board module support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on Echo Digital Audio Fireworks board:
* Mackie Onyx 400F/1200F
* Echo AudioFire12/8(until 2009 July)
* Echo AudioFire2/4/Pre8/8(since 2009 July)
* Echo Fireworks 8/HDMI
* Gibson Robot Interface Pack/GoldTop
To compile this driver as a module, choose M here: the module
will be called snd-fireworks.
config SND_BEBOB
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
* Edirol FA-66/FA-101
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
* BridgeCo RDAudio1/Audio5
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
* Mackie d.2 (FireWire Option)
* Stanton FinalScratch 2 (ScratchAmp)
* Tascam IF-FW/DM
* Behringer XENIX UFX 1204/1604
* Behringer Digital Mixer X32 series (X-UF Card)
* Behringer FCA610/1616
* Apogee Rosetta 200/400 (X-FireWire card)
* Apogee DA/AD/DD-16X (X-FireWire card)
* Apogee Ensemble
* ESI QuataFire 610
* AcousticReality eARMasterOne
* CME MatrixKFW
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
* Lynx Aurora 8/16 (LT-FW)
* ICON FireXon
* PrismSound Orpheus/ADA-8XR
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
* TerraTec EWS MIC2/EWS MIC8
* TerraTec Aureon 7.1 FireWire
* Yamaha GO44/GO46
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
* M-Audio FireWire410/AudioPhile/Solo
* M-Audio Ozonic/NRV10/ProfireLightBridge
* M-Audio FireWire 1814/ProjectMix IO
* Digidesign Mbox 2 Pro
To compile this driver as a module, choose M here: the module
will be called snd-bebob.
config SND_FIREWIRE_DIGI00X
tristate "Digidesign Digi 002/003 family support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for Digidesign Digi 002/003 family.
* Digi 002 Console
* Digi 002 Rack
* Digi 003 Console
* Digi 003 Rack
* Digi 003 Rack+
To compile this driver as a module, choose M here: the module
will be called snd-firewire-digi00x.
config SND_FIREWIRE_TASCAM
tristate "TASCAM FireWire series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for TASCAM.
* FW-1884
* FW-1082
* FW-1804
To compile this driver as a module, choose M here: the module
will be called snd-firewire-tascam.
config SND_FIREWIRE_MOTU
tristate "Mark of the unicorn FireWire series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to enable support for FireWire devices which MOTU produced:
* 828mk2
* Traveler
* 828mk3
* Audio Express
To compile this driver as a module, choose M here: the module
will be called snd-firewire-motu.
config SND_FIREFACE
tristate "RME Fireface series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for RME fireface series.
* Fireface 400
* Fireface 800
endif # SND_FIREWIRE