linux/drivers
Mahesh Bandewar 2ad7bf3638 ipvlan: Initial check-in of the IPVLAN driver.
This driver is very similar to the macvlan driver except that it
uses L3 on the frame to determine the logical interface while
functioning as packet dispatcher. It inherits L2 of the master
device hence the packets on wire will have the same L2 for all
the packets originating from all virtual devices off of the same
master device.

This driver was developed keeping the namespace use-case in
mind. Hence most of the examples given here take that as the
base setup where main-device belongs to the default-ns and
virtual devices are assigned to the additional namespaces.

The device operates in two different modes and the difference
in these two modes in primarily in the TX side.

(a) L2 mode : In this mode, the device behaves as a L2 device.
TX processing upto L2 happens on the stack of the virtual device
associated with (namespace). Packets are switched after that
into the main device (default-ns) and queued for xmit.

RX processing is simple and all multicast, broadcast (if
applicable), and unicast belonging to the address(es) are
delivered to the virtual devices.

(b) L3 mode : In this mode, the device behaves like a L3 device.
TX processing upto L3 happens on the stack of the virtual device
associated with (namespace). Packets are switched to the
main-device (default-ns) for the L2 processing. Hence the routing
table of the default-ns will be used in this mode.

RX processins is somewhat similar to the L2 mode except that in
this mode only Unicast packets are delivered to the virtual device
while main-dev will handle all other packets.

The devices can be added using the "ip" command from the iproute2
package -

	ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24 15:29:18 -05:00
..
accessibility
acpi ACPI / PM: Ignore wakeup setting if the ACPI companion can't wake up 2014-11-20 01:24:16 +01:00
amba PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h 2014-09-30 01:16:44 +02:00
ata ahci: fix AHCI parameters not taken into account 2014-11-04 12:56:25 -05:00
atm drivers: atm: eni: Add pci_dma_mapping_error() call 2014-11-21 15:03:40 -05:00
auxdisplay
base Merge branches 'pm-domains', 'pm-sleep' and 'pm-cpufreq' 2014-11-14 15:17:32 +01:00
bcma Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-11-19 15:38:48 -05:00
block zram: avoid kunmap_atomic() of a NULL pointer 2014-11-13 16:17:05 -08:00
bluetooth Bluetooth: Add support for Broadcom BCM20702A1 variant 2014-11-18 08:32:14 +01:00
bus ARM: SoC driver updates for 3.18 2014-10-08 17:37:16 -04:00
cdrom
char virtio: bugfix for 3.18 2014-11-13 18:07:52 -08:00
clk The clk tree changes for 3.18 are dominated by clock drivers. Mostly 2014-10-15 07:05:03 +02:00
clocksource ARM/ARM64: arch-timer: fix arch_timer_probed logic 2014-10-26 20:50:00 +01:00
connector
cpufreq cpufreq: Avoid crash in resume on SMP without OPP 2014-11-08 02:10:04 +01:00
cpuidle Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2014-10-24 12:48:47 -07:00
crypto crypto: caam - fix missing dma unmap on error path 2014-11-06 23:10:20 +08:00
dca
devfreq PM / devfreq: exynos: Enable building exynos PPMU as module 2014-09-29 20:22:36 +09:00
dio
dma Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma 2014-11-21 16:24:27 -08:00
dma-buf dma-buf: don't open-code atomic_long_read() 2014-10-09 02:39:07 -04:00
edac e7xxx_edac: Report CE events properly 2014-10-22 22:59:00 +02:00
eisa
extcon extcon: gpio: Fix code cleanup 2014-09-22 16:48:47 +09:00
firewire firewire: cdev: prevent kernel stack leaking into ioctl arguments 2014-11-14 12:10:13 +01:00
firmware Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-10-23 14:45:09 -07:00
fmc
gpio This is the bulk of GPIO changes for the v3.18 development 2014-10-09 14:58:15 -04:00
gpu Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-fixes 2014-11-21 12:19:19 +10:00
hid Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid 2014-11-13 16:19:14 -08:00
hsi
hv Drivers: hv: vmbus: Enable interrupt driven flow control 2014-09-23 23:31:22 -07:00
hwmon hwmon: (fam15h_power) Fix NB device ID for F16h M30h 2014-11-11 10:39:45 -08:00
hwspinlock
i2c i2c: core: Dispose OF IRQ mapping at client removal time 2014-11-07 19:03:18 +01:00
ide Merge branch 'for-3.18/drivers' of git://git.kernel.dk/linux-block 2014-10-18 12:12:45 -07:00
idle
iio iio: as3935: allocate correct iio_device size 2014-11-05 18:33:46 +00:00
infiniband RDMA/cxgb4/cxgb4vf/csiostor: Cleanup macros/register defines related to PCIE, RSS and FW 2014-11-22 16:57:47 -05:00
input Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2014-11-14 14:31:54 -08:00
iommu IOMMU Updates for Linux v3.18 2014-10-15 07:23:49 +02:00
ipack ipoctal: clear break interrupt as soon as it occurs 2014-09-23 23:26:42 -07:00
irqchip irqchip: armada-370-xp: Fix MPIC interrupt handling 2014-11-02 01:31:10 +00:00
isdn mISDN: Deletion of unnecessary checks before the function call "vfree" 2014-11-21 12:17:53 -05:00
leds Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds 2014-10-21 08:18:38 -07:00
lguest
macintosh powerpc: Move via-cuda symbol exports next to function definitions 2014-09-25 23:14:37 +10:00
mailbox Merge branch 'mailbox-for-linus' of git://git.linaro.org/landing-teams/working/fujitsu/integration 2014-10-21 11:21:19 -07:00
mcb
md One fix for md for 3.18. 2014-11-16 15:34:31 -08:00
media [media] sp2: sp2_init() can be static 2014-11-03 19:08:06 -02:00
memory
memstick memstick: r592: fix build warnings for !PM_SLEEP 2014-10-14 02:18:22 +02:00
message SCSI for-linus on 20141007 2014-10-07 21:29:18 -04:00
mfd mfd: twl4030-power: Fix poweroff with PM configuration enabled 2014-11-10 15:22:04 +00:00
misc cxl: Fix PSL error due to duplicate segment table entries 2014-10-28 19:52:52 +11:00
mmc mmc: core: fix card detection regression 2014-11-05 09:28:48 +01:00
mtd Three main MTD fixes for 3.18: 2014-11-02 14:45:52 -08:00
net ipvlan: Initial check-in of the IPVLAN driver. 2014-11-24 15:29:18 -05:00
nfc Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-10-07 14:48:29 -04:00
ntb ntb: Adding split BAR support for Haswell platforms 2014-10-17 07:08:51 -04:00
nubus
of of/selftest: Fix testing when /aliases is missing 2014-11-20 15:32:49 +00:00
oprofile
parisc Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-10-13 16:23:15 +02:00
parport parport: parport_pc: Implement architecture and device check to cut off false-positives 2014-09-23 23:14:28 -07:00
pci PCI updates for v3.18: 2014-11-21 16:36:42 -08:00
pcmcia
phy phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly 2014-11-05 14:34:06 -08:00
pinctrl pinctrl: baytrail: show output gpio state correctly on Intel Baytrail 2014-10-28 11:16:26 +01:00
platform platform: hp_accel: Add SERIO_I8042 as a dependency since it now includes i8042.h/serio.h 2014-11-10 21:16:15 -08:00
pnp PNP: replace strnicmp with strncasecmp 2014-10-14 02:18:25 +02:00
power power supply and reset changes for the v3.18-rc 2014-11-15 15:22:51 -08:00
powercap
pps
ps3
ptp
pwm pwm: Changes for v3.18-rc1 2014-10-21 08:17:43 -07:00
rapidio
ras
regulator Merge remote-tracking branches 'regulator/fix/max1586', 'regulator/fix/max77686', 'regulator/fix/max77693', 'regulator/fix/max77802', 'regulator/fix/max8860' and 'regulator/fix/s2mpa01' into regulator-linus 2014-11-05 14:59:25 +00:00
remoteproc
reset
rpmsg
rtc drivers/rtc/rtc-bq32k.c: fix register value 2014-10-29 16:33:14 -07:00
s390 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-11-14 01:01:12 -05:00
sbus
scsi RDMA/cxgb4/cxgb4vf/csiostor: Cleanup macros/register defines related to PCIE, RSS and FW 2014-11-22 16:57:47 -05:00
sfi
sh
sn
soc soc: versatile: Add terminating entry for realview_soc_of_match 2014-10-28 22:05:07 +01:00
spi Merge remote-tracking branches 'spi/fix/fsl-dspi' and 'spi/fix/pxa2xx' into spi-linus 2014-11-06 12:58:46 +00:00
spmi
ssb This is the bulk of GPIO changes for the v3.18 development 2014-10-09 14:58:15 -04:00
staging Merge tag 'master-2014-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next 2014-11-21 16:39:45 -05:00
target target: return CONFLICT only when SA key unmatched 2014-11-02 22:04:57 -08:00
tc
thermal imx: thermal: imx_get_temp might be called before sensor clock is prepared 2014-11-09 15:42:53 -04:00
thunderbolt
tty tty: Fix pty master poll() after slave closes v2 2014-11-06 12:23:36 -08:00
uio uio: Export definition of struct uio_device 2014-10-02 21:35:54 -07:00
usb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-11-14 01:01:12 -05:00
uwb uwb: add an ASIE sysfs attribute to uwb_rc devices 2014-09-23 22:05:26 -07:00
vfio IOMMU Updates for Linux v3.18 2014-10-15 07:23:49 +02:00
vhost vhost-scsi: Take configfs group dependency during VHOST_SCSI_SET_ENDPOINT 2014-10-28 13:54:16 -07:00
video Merge branch '3.18/omapdss-fixes' into 3.18/fbdev-fixes 2014-10-30 14:53:49 +02:00
virt
virtio One cc: stable commit, the rest are a series of minor cleanups which have 2014-10-18 10:25:09 -07:00
vlynq
vme
w1
watchdog watchdog: meson: remove magic value for reboot 2014-10-20 21:09:17 +02:00
xen xen/pci: Allocate memory for physdev_pci_device_add's optarr 2014-10-23 16:24:02 +01:00
zorro
Kconfig soc: ti: add Keystone Navigator QMSS driver 2014-09-24 09:49:14 -04:00
Makefile