Krzysztof Kozlowski f98c7bce57 serial: samsung: Continue to work if DMA request fails ... If DMA is not available (even when configured in DeviceTree), the driver will fail the startup procedure thus making serial console not available. For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210): [    1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@12680000 ... [   11.435732] samsung-uart 13800000.serial: DMA request failed [   72.963893] samsung-uart 13800000.serial: DMA request failed [   73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 DMA is not necessary for serial to work, so continue with UART startup after emitting a warning. Fixes: 62c37eedb7 ("serial: samsung: add dma reqest/release functions") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2017-03-07 19:58:37 +01:00
..
8250	serial: exar: Enable MSI support	2017-02-10 15:13:26 +01:00
cpm_uart	tty: serial: cpm_uart: make use of for_each_node_by_type()	2017-02-03 10:12:16 +01:00
jsm	tty: serial: jsm_tty: constify uart_ops structures	2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c	serial: altera: constify uart_ops structures	2016-09-02 15:01:16 +02:00
altera_uart.c	serial: altera: constify uart_ops structures	2016-09-02 15:01:16 +02:00
amba-pl010.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
amba-pl011.c	tty: pl011: Work around QDF2400 E44 stuck BUSY bit	2017-02-15 14:46:43 -08:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
arc_uart.c	serial/arc: constify uart_ops structures	2016-09-01 21:05:41 +02:00
atmel_serial.c	atmel_serial: Use the fractional divider when possible	2017-02-14 10:12:21 -08:00
bcm63xx_uart.c	serial/bcm63xx_uart: constify uart_ops structures	2016-09-02 15:01:16 +02:00
bfin_sport_uart.c	tty: serial: constify dev_pm_ops structures	2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c
clps711x.c	serial: clps711x: Changing the compatibility string to match with the smallest supported chip	2016-07-06 17:38:16 +02:00
crisv10.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c
dz.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c	tty/serial: mark __init early_smh_setup() static	2016-09-02 15:03:35 +02:00
earlycon.c	ACPI: parse SPCR and enable matching console	2016-09-28 17:46:46 +02:00
efm32-uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
etraxfs-uart.c
fsl_lpuart.c	tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock	2017-01-12 11:51:24 +01:00
icom.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c	serial: ifx6x60: Free memory when probe fails	2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c	serial: imx: Fix the CTS_B polarity in RS485 mode	2017-01-31 10:54:58 +01:00
ioc3_serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
ioc4_serial.c	scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances	2017-02-27 18:43:47 -08:00
ip22zilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig	tty: serial: lantiq: implement earlycon support	2017-01-12 11:51:24 +01:00
kgdb_nmi.c
kgdboc.c
lantiq.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
lpc32xx_hs.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c	serial: m32r_sio: make it explicitly non-modular	2016-06-25 14:00:06 -07:00
Makefile	tty: serial: Makefile: move kgdb to be initialized last	2016-10-27 16:27:24 +02:00
max310x.c	serial: max310x: Add support for newer silicon revisions	2017-01-12 11:51:24 +01:00
max3100.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
meson_uart.c	tty: serial: meson: allow baud-rates higher than 115200	2017-01-19 14:38:57 +01:00
mpc52xx_uart.c
mps2-uart.c	serial: mps2-uart: make driver explicitly non-modular	2016-06-25 14:01:57 -07:00
mpsc.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
msm_serial.c	tty: serial: msm: Fix module autoload	2017-01-12 11:51:25 +01:00
mux.c
mvebu-uart.c	serial: mvebu-uart: free the IRQ in ->shutdown()	2016-06-25 14:00:06 -07:00
mxs-auart.c	serial: mxs-auart: support CMSPAR termios cflag	2017-01-12 11:51:24 +01:00
netx-serial.c
omap-serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
pch_uart.c	serial: pch_uart: add terminate entry for dmi_system_id tables	2016-10-27 16:01:31 +02:00
pic32_uart.c	serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy	2017-01-12 11:51:24 +01:00
pic32_uart.h
pmac_zilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
pmac_zilog.h
pnx8xxx_uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
pxa.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c
samsung.c	serial: samsung: Continue to work if DMA request fails	2017-03-07 19:58:37 +01:00
samsung.h	serial: samsung: Simplify DMA engine initialization code	2017-01-12 11:51:24 +01:00
sb1250-duart.c
sc16is7xx.c	sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h>	2017-03-02 08:42:27 +01:00
sccnxp.c
serial_core.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
serial_ks8695.c
serial_mctrl_gpio.c	serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct	2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h	serial: mctrl_gpio: add modem control read routine	2016-06-25 14:30:42 -07:00
serial_txx9.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
serial-tegra.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sh-sci.c	serial: sh-sci: fix hardware RX trigger level setting	2017-02-10 15:10:16 +01:00
sh-sci.h	serial: sh-sci: consider DR (data ready) bit adequately	2017-02-03 10:14:10 +01:00
sirfsoc_uart.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sirfsoc_uart.h	serial: sirf: make fifo functions static	2016-06-25 14:01:57 -07:00
sn_console.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sprd_serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
st-asc.c	serial: st-asc: Use generic DT binding for announcing RTS/CTS lines	2017-02-06 09:47:52 +01:00
stm32-usart.c	serial: stm32: mark symbols static where possible	2016-09-27 12:55:27 +02:00
stm32-usart.h	serial: stm32: Fix comparisons with undefined register	2016-10-27 16:00:31 +02:00
suncore.c
sunhv.c	sparc64: Send break twice from console to return to boot prom	2017-02-23 08:27:24 -08:00
sunsab.c
sunsab.h
sunsu.c	serial: sunsu: Free memory when probe fails	2016-11-16 10:57:26 +01:00
sunzilog.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c	tty: serial: constify uart_ops structures	2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c	serial-uartlite: constify uart_ops structures	2016-09-02 15:01:16 +02:00
ucc_uart.c
vr41xx_siu.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
vt8500_serial.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
xilinx_uartps.c	serial: xuartps: Enable uart loopback mode	2017-01-25 11:08:30 +01:00
zs.c	tty: serial: constify uart_ops structures	2017-01-27 09:23:36 +01:00
zs.h