mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
3155f4f408
Commitbd0e6c9614("usb: hub: try old enumeration scheme first for high speed devices") changed the way the hub driver enumerates high-speed devices. Instead of using the "new" enumeration scheme first and switching to the "old" scheme if that doesn't work, we start with the "old" scheme. In theory this is better because the "old" scheme is slightly faster -- it involves resetting the device only once instead of twice. However, for a long time Windows used only the "new" scheme. Zeng Tao said that Windows 8 and later use the "old" scheme for high-speed devices, but apparently there are some devices that don't like it. William Bader reports that the Ricoh webcam built into his Sony Vaio laptop not only doesn't enumerate under the "old" scheme, it gets hung up so badly that it won't then enumerate under the "new" scheme! Only a cold reset will fix it. Therefore we will revert the commit and go back to trying the "new" scheme first for high-speed devices. Reported-and-tested-by: William Bader <williambader@hotmail.com> Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207219 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes:bd0e6c9614("usb: hub: try old enumeration scheme first for high speed devices") CC: Zeng Tao <prime.zeng@hisilicon.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221611230.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6108 lines
174 KiB
C
6108 lines
174 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* USB hub driver.
|
|
*
|
|
* (C) Copyright 1999 Linus Torvalds
|
|
* (C) Copyright 1999 Johannes Erdfelt
|
|
* (C) Copyright 1999 Gregory P. Smith
|
|
* (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au)
|
|
*
|
|
* Released under the GPLv2 only.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/sched/mm.h>
|
|
#include <linux/list.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/kcov.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usbdevice_fs.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/quirks.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/random.h>
|
|
#include <linux/pm_qos.h>
|
|
#include <linux/kobject.h>
|
|
|
|
#include <linux/uaccess.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include "hub.h"
|
|
#include "otg_whitelist.h"
|
|
|
|
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
|
|
#define USB_VENDOR_SMSC 0x0424
|
|
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
|
|
#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
|
|
|
|
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */
|
|
#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
|
|
|
|
/* Protect struct usb_device->state and ->children members
|
|
* Note: Both are also protected by ->dev.sem, except that ->state can
|
|
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
|
|
static DEFINE_SPINLOCK(device_state_lock);
|
|
|
|
/* workqueue to process hub events */
|
|
static struct workqueue_struct *hub_wq;
|
|
static void hub_event(struct work_struct *work);
|
|
|
|
/* synchronize hub-port add/remove and peering operations */
|
|
DEFINE_MUTEX(usb_port_peer_mutex);
|
|
|
|
/* cycle leds on hubs that aren't blinking for attention */
|
|
static bool blinkenlights;
|
|
module_param(blinkenlights, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(blinkenlights, "true to cycle leds on hubs");
|
|
|
|
/*
|
|
* Device SATA8000 FW1.0 from DATAST0R Technology Corp requires about
|
|
* 10 seconds to send reply for the initial 64-byte descriptor request.
|
|
*/
|
|
/* define initial 64-byte descriptor request timeout in milliseconds */
|
|
static int initial_descriptor_timeout = USB_CTRL_GET_TIMEOUT;
|
|
module_param(initial_descriptor_timeout, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(initial_descriptor_timeout,
|
|
"initial 64-byte descriptor request timeout in milliseconds "
|
|
"(default 5000 - 5.0 seconds)");
|
|
|
|
/*
|
|
* As of 2.6.10 we introduce a new USB device initialization scheme which
|
|
* closely resembles the way Windows works. Hopefully it will be compatible
|
|
* with a wider range of devices than the old scheme. However some previously
|
|
* working devices may start giving rise to "device not accepting address"
|
|
* errors; if that happens the user can try the old scheme by adjusting the
|
|
* following module parameters.
|
|
*
|
|
* For maximum flexibility there are two boolean parameters to control the
|
|
* hub driver's behavior. On the first initialization attempt, if the
|
|
* "old_scheme_first" parameter is set then the old scheme will be used,
|
|
* otherwise the new scheme is used. If that fails and "use_both_schemes"
|
|
* is set, then the driver will make another attempt, using the other scheme.
|
|
*/
|
|
static bool old_scheme_first;
|
|
module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(old_scheme_first,
|
|
"start with the old device initialization scheme");
|
|
|
|
static bool use_both_schemes = 1;
|
|
module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(use_both_schemes,
|
|
"try the other device initialization scheme if the "
|
|
"first one fails");
|
|
|
|
/* Mutual exclusion for EHCI CF initialization. This interferes with
|
|
* port reset on some companion controllers.
|
|
*/
|
|
DECLARE_RWSEM(ehci_cf_port_reset_rwsem);
|
|
EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
|
|
|
|
#define HUB_DEBOUNCE_TIMEOUT 2000
|
|
#define HUB_DEBOUNCE_STEP 25
|
|
#define HUB_DEBOUNCE_STABLE 100
|
|
|
|
static void hub_release(struct kref *kref);
|
|
static int usb_reset_and_verify_device(struct usb_device *udev);
|
|
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
|
|
static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
|
|
u16 portstatus);
|
|
|
|
static inline char *portspeed(struct usb_hub *hub, int portstatus)
|
|
{
|
|
if (hub_is_superspeedplus(hub->hdev))
|
|
return "10.0 Gb/s";
|
|
if (hub_is_superspeed(hub->hdev))
|
|
return "5.0 Gb/s";
|
|
if (portstatus & USB_PORT_STAT_HIGH_SPEED)
|
|
return "480 Mb/s";
|
|
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
|
|
return "1.5 Mb/s";
|
|
else
|
|
return "12 Mb/s";
|
|
}
|
|
|
|
/* Note that hdev or one of its children must be locked! */
|
|
struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
|
|
{
|
|
if (!hdev || !hdev->actconfig || !hdev->maxchild)
|
|
return NULL;
|
|
return usb_get_intfdata(hdev->actconfig->interface[0]);
|
|
}
|
|
|
|
int usb_device_supports_lpm(struct usb_device *udev)
|
|
{
|
|
/* Some devices have trouble with LPM */
|
|
if (udev->quirks & USB_QUIRK_NO_LPM)
|
|
return 0;
|
|
|
|
/* USB 2.1 (and greater) devices indicate LPM support through
|
|
* their USB 2.0 Extended Capabilities BOS descriptor.
|
|
*/
|
|
if (udev->speed == USB_SPEED_HIGH || udev->speed == USB_SPEED_FULL) {
|
|
if (udev->bos->ext_cap &&
|
|
(USB_LPM_SUPPORT &
|
|
le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* According to the USB 3.0 spec, all USB 3.0 devices must support LPM.
|
|
* However, there are some that don't, and they set the U1/U2 exit
|
|
* latencies to zero.
|
|
*/
|
|
if (!udev->bos->ss_cap) {
|
|
dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (udev->bos->ss_cap->bU1devExitLat == 0 &&
|
|
udev->bos->ss_cap->bU2DevExitLat == 0) {
|
|
if (udev->parent)
|
|
dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n");
|
|
else
|
|
dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (!udev->parent || udev->parent->lpm_capable)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the Maximum Exit Latency (MEL) for the host to initiate a transition from
|
|
* either U1 or U2.
|
|
*/
|
|
static void usb_set_lpm_mel(struct usb_device *udev,
|
|
struct usb3_lpm_parameters *udev_lpm_params,
|
|
unsigned int udev_exit_latency,
|
|
struct usb_hub *hub,
|
|
struct usb3_lpm_parameters *hub_lpm_params,
|
|
unsigned int hub_exit_latency)
|
|
{
|
|
unsigned int total_mel;
|
|
unsigned int device_mel;
|
|
unsigned int hub_mel;
|
|
|
|
/*
|
|
* Calculate the time it takes to transition all links from the roothub
|
|
* to the parent hub into U0. The parent hub must then decode the
|
|
* packet (hub header decode latency) to figure out which port it was
|
|
* bound for.
|
|
*
|
|
* The Hub Header decode latency is expressed in 0.1us intervals (0x1
|
|
* means 0.1us). Multiply that by 100 to get nanoseconds.
|
|
*/
|
|
total_mel = hub_lpm_params->mel +
|
|
(hub->descriptor->u.ss.bHubHdrDecLat * 100);
|
|
|
|
/*
|
|
* How long will it take to transition the downstream hub's port into
|
|
* U0? The greater of either the hub exit latency or the device exit
|
|
* latency.
|
|
*
|
|
* The BOS U1/U2 exit latencies are expressed in 1us intervals.
|
|
* Multiply that by 1000 to get nanoseconds.
|
|
*/
|
|
device_mel = udev_exit_latency * 1000;
|
|
hub_mel = hub_exit_latency * 1000;
|
|
if (device_mel > hub_mel)
|
|
total_mel += device_mel;
|
|
else
|
|
total_mel += hub_mel;
|
|
|
|
udev_lpm_params->mel = total_mel;
|
|
}
|
|
|
|
/*
|
|
* Set the maximum Device to Host Exit Latency (PEL) for the device to initiate
|
|
* a transition from either U1 or U2.
|
|
*/
|
|
static void usb_set_lpm_pel(struct usb_device *udev,
|
|
struct usb3_lpm_parameters *udev_lpm_params,
|
|
unsigned int udev_exit_latency,
|
|
struct usb_hub *hub,
|
|
struct usb3_lpm_parameters *hub_lpm_params,
|
|
unsigned int hub_exit_latency,
|
|
unsigned int port_to_port_exit_latency)
|
|
{
|
|
unsigned int first_link_pel;
|
|
unsigned int hub_pel;
|
|
|
|
/*
|
|
* First, the device sends an LFPS to transition the link between the
|
|
* device and the parent hub into U0. The exit latency is the bigger of
|
|
* the device exit latency or the hub exit latency.
|
|
*/
|
|
if (udev_exit_latency > hub_exit_latency)
|
|
first_link_pel = udev_exit_latency * 1000;
|
|
else
|
|
first_link_pel = hub_exit_latency * 1000;
|
|
|
|
/*
|
|
* When the hub starts to receive the LFPS, there is a slight delay for
|
|
* it to figure out that one of the ports is sending an LFPS. Then it
|
|
* will forward the LFPS to its upstream link. The exit latency is the
|
|
* delay, plus the PEL that we calculated for this hub.
|
|
*/
|
|
hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel;
|
|
|
|
/*
|
|
* According to figure C-7 in the USB 3.0 spec, the PEL for this device
|
|
* is the greater of the two exit latencies.
|
|
*/
|
|
if (first_link_pel > hub_pel)
|
|
udev_lpm_params->pel = first_link_pel;
|
|
else
|
|
udev_lpm_params->pel = hub_pel;
|
|
}
|
|
|
|
/*
|
|
* Set the System Exit Latency (SEL) to indicate the total worst-case time from
|
|
* when a device initiates a transition to U0, until when it will receive the
|
|
* first packet from the host controller.
|
|
*
|
|
* Section C.1.5.1 describes the four components to this:
|
|
* - t1: device PEL
|
|
* - t2: time for the ERDY to make it from the device to the host.
|
|
* - t3: a host-specific delay to process the ERDY.
|
|
* - t4: time for the packet to make it from the host to the device.
|
|
*
|
|
* t3 is specific to both the xHCI host and the platform the host is integrated
|
|
* into. The Intel HW folks have said it's negligible, FIXME if a different
|
|
* vendor says otherwise.
|
|
*/
|
|
static void usb_set_lpm_sel(struct usb_device *udev,
|
|
struct usb3_lpm_parameters *udev_lpm_params)
|
|
{
|
|
struct usb_device *parent;
|
|
unsigned int num_hubs;
|
|
unsigned int total_sel;
|
|
|
|
/* t1 = device PEL */
|
|
total_sel = udev_lpm_params->pel;
|
|
/* How many external hubs are in between the device & the root port. */
|
|
for (parent = udev->parent, num_hubs = 0; parent->parent;
|
|
parent = parent->parent)
|
|
num_hubs++;
|
|
/* t2 = 2.1us + 250ns * (num_hubs - 1) */
|
|
if (num_hubs > 0)
|
|
total_sel += 2100 + 250 * (num_hubs - 1);
|
|
|
|
/* t4 = 250ns * num_hubs */
|
|
total_sel += 250 * num_hubs;
|
|
|
|
udev_lpm_params->sel = total_sel;
|
|
}
|
|
|
|
static void usb_set_lpm_parameters(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub;
|
|
unsigned int port_to_port_delay;
|
|
unsigned int udev_u1_del;
|
|
unsigned int udev_u2_del;
|
|
unsigned int hub_u1_del;
|
|
unsigned int hub_u2_del;
|
|
|
|
if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER)
|
|
return;
|
|
|
|
hub = usb_hub_to_struct_hub(udev->parent);
|
|
/* It doesn't take time to transition the roothub into U0, since it
|
|
* doesn't have an upstream link.
|
|
*/
|
|
if (!hub)
|
|
return;
|
|
|
|
udev_u1_del = udev->bos->ss_cap->bU1devExitLat;
|
|
udev_u2_del = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat);
|
|
hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat;
|
|
hub_u2_del = le16_to_cpu(udev->parent->bos->ss_cap->bU2DevExitLat);
|
|
|
|
usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del,
|
|
hub, &udev->parent->u1_params, hub_u1_del);
|
|
|
|
usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del,
|
|
hub, &udev->parent->u2_params, hub_u2_del);
|
|
|
|
/*
|
|
* Appendix C, section C.2.2.2, says that there is a slight delay from
|
|
* when the parent hub notices the downstream port is trying to
|
|
* transition to U0 to when the hub initiates a U0 transition on its
|
|
* upstream port. The section says the delays are tPort2PortU1EL and
|
|
* tPort2PortU2EL, but it doesn't define what they are.
|
|
*
|
|
* The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking
|
|
* about the same delays. Use the maximum delay calculations from those
|
|
* sections. For U1, it's tHubPort2PortExitLat, which is 1us max. For
|
|
* U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat. I
|
|
* assume the device exit latencies they are talking about are the hub
|
|
* exit latencies.
|
|
*
|
|
* What do we do if the U2 exit latency is less than the U1 exit
|
|
* latency? It's possible, although not likely...
|
|
*/
|
|
port_to_port_delay = 1;
|
|
|
|
usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del,
|
|
hub, &udev->parent->u1_params, hub_u1_del,
|
|
port_to_port_delay);
|
|
|
|
if (hub_u2_del > hub_u1_del)
|
|
port_to_port_delay = 1 + hub_u2_del - hub_u1_del;
|
|
else
|
|
port_to_port_delay = 1 + hub_u1_del;
|
|
|
|
usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del,
|
|
hub, &udev->parent->u2_params, hub_u2_del,
|
|
port_to_port_delay);
|
|
|
|
/* Now that we've got PEL, calculate SEL. */
|
|
usb_set_lpm_sel(udev, &udev->u1_params);
|
|
usb_set_lpm_sel(udev, &udev->u2_params);
|
|
}
|
|
|
|
/* USB 2.0 spec Section 11.24.4.5 */
|
|
static int get_hub_descriptor(struct usb_device *hdev,
|
|
struct usb_hub_descriptor *desc)
|
|
{
|
|
int i, ret, size;
|
|
unsigned dtype;
|
|
|
|
if (hub_is_superspeed(hdev)) {
|
|
dtype = USB_DT_SS_HUB;
|
|
size = USB_DT_SS_HUB_SIZE;
|
|
} else {
|
|
dtype = USB_DT_HUB;
|
|
size = sizeof(struct usb_hub_descriptor);
|
|
}
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
|
|
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
|
|
dtype << 8, 0, desc, size,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
if (hub_is_superspeed(hdev)) {
|
|
if (ret == size)
|
|
return ret;
|
|
} else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) {
|
|
/* Make sure we have the DeviceRemovable field. */
|
|
size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1;
|
|
if (ret < size)
|
|
return -EMSGSIZE;
|
|
return ret;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* USB 2.0 spec Section 11.24.2.1
|
|
*/
|
|
static int clear_hub_feature(struct usb_device *hdev, int feature)
|
|
{
|
|
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
|
|
USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000);
|
|
}
|
|
|
|
/*
|
|
* USB 2.0 spec Section 11.24.2.2
|
|
*/
|
|
int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature)
|
|
{
|
|
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
|
|
USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
|
|
NULL, 0, 1000);
|
|
}
|
|
|
|
/*
|
|
* USB 2.0 spec Section 11.24.2.13
|
|
*/
|
|
static int set_port_feature(struct usb_device *hdev, int port1, int feature)
|
|
{
|
|
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
|
|
USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
|
|
NULL, 0, 1000);
|
|
}
|
|
|
|
static char *to_led_name(int selector)
|
|
{
|
|
switch (selector) {
|
|
case HUB_LED_AMBER:
|
|
return "amber";
|
|
case HUB_LED_GREEN:
|
|
return "green";
|
|
case HUB_LED_OFF:
|
|
return "off";
|
|
case HUB_LED_AUTO:
|
|
return "auto";
|
|
default:
|
|
return "??";
|
|
}
|
|
}
|
|
|
|
/*
|
|
* USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7
|
|
* for info about using port indicators
|
|
*/
|
|
static void set_port_led(struct usb_hub *hub, int port1, int selector)
|
|
{
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
int status;
|
|
|
|
status = set_port_feature(hub->hdev, (selector << 8) | port1,
|
|
USB_PORT_FEAT_INDICATOR);
|
|
dev_dbg(&port_dev->dev, "indicator %s status %d\n",
|
|
to_led_name(selector), status);
|
|
}
|
|
|
|
#define LED_CYCLE_PERIOD ((2*HZ)/3)
|
|
|
|
static void led_work(struct work_struct *work)
|
|
{
|
|
struct usb_hub *hub =
|
|
container_of(work, struct usb_hub, leds.work);
|
|
struct usb_device *hdev = hub->hdev;
|
|
unsigned i;
|
|
unsigned changed = 0;
|
|
int cursor = -1;
|
|
|
|
if (hdev->state != USB_STATE_CONFIGURED || hub->quiescing)
|
|
return;
|
|
|
|
for (i = 0; i < hdev->maxchild; i++) {
|
|
unsigned selector, mode;
|
|
|
|
/* 30%-50% duty cycle */
|
|
|
|
switch (hub->indicator[i]) {
|
|
/* cycle marker */
|
|
case INDICATOR_CYCLE:
|
|
cursor = i;
|
|
selector = HUB_LED_AUTO;
|
|
mode = INDICATOR_AUTO;
|
|
break;
|
|
/* blinking green = sw attention */
|
|
case INDICATOR_GREEN_BLINK:
|
|
selector = HUB_LED_GREEN;
|
|
mode = INDICATOR_GREEN_BLINK_OFF;
|
|
break;
|
|
case INDICATOR_GREEN_BLINK_OFF:
|
|
selector = HUB_LED_OFF;
|
|
mode = INDICATOR_GREEN_BLINK;
|
|
break;
|
|
/* blinking amber = hw attention */
|
|
case INDICATOR_AMBER_BLINK:
|
|
selector = HUB_LED_AMBER;
|
|
mode = INDICATOR_AMBER_BLINK_OFF;
|
|
break;
|
|
case INDICATOR_AMBER_BLINK_OFF:
|
|
selector = HUB_LED_OFF;
|
|
mode = INDICATOR_AMBER_BLINK;
|
|
break;
|
|
/* blink green/amber = reserved */
|
|
case INDICATOR_ALT_BLINK:
|
|
selector = HUB_LED_GREEN;
|
|
mode = INDICATOR_ALT_BLINK_OFF;
|
|
break;
|
|
case INDICATOR_ALT_BLINK_OFF:
|
|
selector = HUB_LED_AMBER;
|
|
mode = INDICATOR_ALT_BLINK;
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
if (selector != HUB_LED_AUTO)
|
|
changed = 1;
|
|
set_port_led(hub, i + 1, selector);
|
|
hub->indicator[i] = mode;
|
|
}
|
|
if (!changed && blinkenlights) {
|
|
cursor++;
|
|
cursor %= hdev->maxchild;
|
|
set_port_led(hub, cursor + 1, HUB_LED_GREEN);
|
|
hub->indicator[cursor] = INDICATOR_CYCLE;
|
|
changed++;
|
|
}
|
|
if (changed)
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&hub->leds, LED_CYCLE_PERIOD);
|
|
}
|
|
|
|
/* use a short timeout for hub/port status fetches */
|
|
#define USB_STS_TIMEOUT 1000
|
|
#define USB_STS_RETRIES 5
|
|
|
|
/*
|
|
* USB 2.0 spec Section 11.24.2.6
|
|
*/
|
|
static int get_hub_status(struct usb_device *hdev,
|
|
struct usb_hub_status *data)
|
|
{
|
|
int i, status = -ETIMEDOUT;
|
|
|
|
for (i = 0; i < USB_STS_RETRIES &&
|
|
(status == -ETIMEDOUT || status == -EPIPE); i++) {
|
|
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
|
|
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
|
|
data, sizeof(*data), USB_STS_TIMEOUT);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* USB 2.0 spec Section 11.24.2.7
|
|
* USB 3.1 takes into use the wValue and wLength fields, spec Section 10.16.2.6
|
|
*/
|
|
static int get_port_status(struct usb_device *hdev, int port1,
|
|
void *data, u16 value, u16 length)
|
|
{
|
|
int i, status = -ETIMEDOUT;
|
|
|
|
for (i = 0; i < USB_STS_RETRIES &&
|
|
(status == -ETIMEDOUT || status == -EPIPE); i++) {
|
|
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
|
|
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, value,
|
|
port1, data, length, USB_STS_TIMEOUT);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int hub_ext_port_status(struct usb_hub *hub, int port1, int type,
|
|
u16 *status, u16 *change, u32 *ext_status)
|
|
{
|
|
int ret;
|
|
int len = 4;
|
|
|
|
if (type != HUB_PORT_STATUS)
|
|
len = 8;
|
|
|
|
mutex_lock(&hub->status_mutex);
|
|
ret = get_port_status(hub->hdev, port1, &hub->status->port, type, len);
|
|
if (ret < len) {
|
|
if (ret != -ENODEV)
|
|
dev_err(hub->intfdev,
|
|
"%s failed (err = %d)\n", __func__, ret);
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
} else {
|
|
*status = le16_to_cpu(hub->status->port.wPortStatus);
|
|
*change = le16_to_cpu(hub->status->port.wPortChange);
|
|
if (type != HUB_PORT_STATUS && ext_status)
|
|
*ext_status = le32_to_cpu(
|
|
hub->status->port.dwExtPortStatus);
|
|
ret = 0;
|
|
}
|
|
mutex_unlock(&hub->status_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int hub_port_status(struct usb_hub *hub, int port1,
|
|
u16 *status, u16 *change)
|
|
{
|
|
return hub_ext_port_status(hub, port1, HUB_PORT_STATUS,
|
|
status, change, NULL);
|
|
}
|
|
|
|
static void hub_resubmit_irq_urb(struct usb_hub *hub)
|
|
{
|
|
unsigned long flags;
|
|
int status;
|
|
|
|
spin_lock_irqsave(&hub->irq_urb_lock, flags);
|
|
|
|
if (hub->quiescing) {
|
|
spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
|
|
return;
|
|
}
|
|
|
|
status = usb_submit_urb(hub->urb, GFP_ATOMIC);
|
|
if (status && status != -ENODEV && status != -EPERM &&
|
|
status != -ESHUTDOWN) {
|
|
dev_err(hub->intfdev, "resubmit --> %d\n", status);
|
|
mod_timer(&hub->irq_urb_retry, jiffies + HZ);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
|
|
}
|
|
|
|
static void hub_retry_irq_urb(struct timer_list *t)
|
|
{
|
|
struct usb_hub *hub = from_timer(hub, t, irq_urb_retry);
|
|
|
|
hub_resubmit_irq_urb(hub);
|
|
}
|
|
|
|
|
|
static void kick_hub_wq(struct usb_hub *hub)
|
|
{
|
|
struct usb_interface *intf;
|
|
|
|
if (hub->disconnected || work_pending(&hub->events))
|
|
return;
|
|
|
|
/*
|
|
* Suppress autosuspend until the event is proceed.
|
|
*
|
|
* Be careful and make sure that the symmetric operation is
|
|
* always called. We are here only when there is no pending
|
|
* work for this hub. Therefore put the interface either when
|
|
* the new work is called or when it is canceled.
|
|
*/
|
|
intf = to_usb_interface(hub->intfdev);
|
|
usb_autopm_get_interface_no_resume(intf);
|
|
kref_get(&hub->kref);
|
|
|
|
if (queue_work(hub_wq, &hub->events))
|
|
return;
|
|
|
|
/* the work has already been scheduled */
|
|
usb_autopm_put_interface_async(intf);
|
|
kref_put(&hub->kref, hub_release);
|
|
}
|
|
|
|
void usb_kick_hub_wq(struct usb_device *hdev)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
|
|
|
|
if (hub)
|
|
kick_hub_wq(hub);
|
|
}
|
|
|
|
/*
|
|
* Let the USB core know that a USB 3.0 device has sent a Function Wake Device
|
|
* Notification, which indicates it had initiated remote wakeup.
|
|
*
|
|
* USB 3.0 hubs do not report the port link state change from U3 to U0 when the
|
|
* device initiates resume, so the USB core will not receive notice of the
|
|
* resume through the normal hub interrupt URB.
|
|
*/
|
|
void usb_wakeup_notification(struct usb_device *hdev,
|
|
unsigned int portnum)
|
|
{
|
|
struct usb_hub *hub;
|
|
struct usb_port *port_dev;
|
|
|
|
if (!hdev)
|
|
return;
|
|
|
|
hub = usb_hub_to_struct_hub(hdev);
|
|
if (hub) {
|
|
port_dev = hub->ports[portnum - 1];
|
|
if (port_dev && port_dev->child)
|
|
pm_wakeup_event(&port_dev->child->dev, 0);
|
|
|
|
set_bit(portnum, hub->wakeup_bits);
|
|
kick_hub_wq(hub);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_wakeup_notification);
|
|
|
|
/* completion function, fires on port status changes and various faults */
|
|
static void hub_irq(struct urb *urb)
|
|
{
|
|
struct usb_hub *hub = urb->context;
|
|
int status = urb->status;
|
|
unsigned i;
|
|
unsigned long bits;
|
|
|
|
switch (status) {
|
|
case -ENOENT: /* synchronous unlink */
|
|
case -ECONNRESET: /* async unlink */
|
|
case -ESHUTDOWN: /* hardware going away */
|
|
return;
|
|
|
|
default: /* presumably an error */
|
|
/* Cause a hub reset after 10 consecutive errors */
|
|
dev_dbg(hub->intfdev, "transfer --> %d\n", status);
|
|
if ((++hub->nerrors < 10) || hub->error)
|
|
goto resubmit;
|
|
hub->error = status;
|
|
/* FALL THROUGH */
|
|
|
|
/* let hub_wq handle things */
|
|
case 0: /* we got data: port status changed */
|
|
bits = 0;
|
|
for (i = 0; i < urb->actual_length; ++i)
|
|
bits |= ((unsigned long) ((*hub->buffer)[i]))
|
|
<< (i*8);
|
|
hub->event_bits[0] = bits;
|
|
break;
|
|
}
|
|
|
|
hub->nerrors = 0;
|
|
|
|
/* Something happened, let hub_wq figure it out */
|
|
kick_hub_wq(hub);
|
|
|
|
resubmit:
|
|
hub_resubmit_irq_urb(hub);
|
|
}
|
|
|
|
/* USB 2.0 spec Section 11.24.2.3 */
|
|
static inline int
|
|
hub_clear_tt_buffer(struct usb_device *hdev, u16 devinfo, u16 tt)
|
|
{
|
|
/* Need to clear both directions for control ep */
|
|
if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
|
|
USB_ENDPOINT_XFER_CONTROL) {
|
|
int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
|
|
HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
|
|
devinfo ^ 0x8000, tt, NULL, 0, 1000);
|
|
if (status)
|
|
return status;
|
|
}
|
|
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
|
|
HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
|
|
tt, NULL, 0, 1000);
|
|
}
|
|
|
|
/*
|
|
* enumeration blocks hub_wq for a long time. we use keventd instead, since
|
|
* long blocking there is the exception, not the rule. accordingly, HCDs
|
|
* talking to TTs must queue control transfers (not just bulk and iso), so
|
|
* both can talk to the same hub concurrently.
|
|
*/
|
|
static void hub_tt_work(struct work_struct *work)
|
|
{
|
|
struct usb_hub *hub =
|
|
container_of(work, struct usb_hub, tt.clear_work);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&hub->tt.lock, flags);
|
|
while (!list_empty(&hub->tt.clear_list)) {
|
|
struct list_head *next;
|
|
struct usb_tt_clear *clear;
|
|
struct usb_device *hdev = hub->hdev;
|
|
const struct hc_driver *drv;
|
|
int status;
|
|
|
|
next = hub->tt.clear_list.next;
|
|
clear = list_entry(next, struct usb_tt_clear, clear_list);
|
|
list_del(&clear->clear_list);
|
|
|
|
/* drop lock so HCD can concurrently report other TT errors */
|
|
spin_unlock_irqrestore(&hub->tt.lock, flags);
|
|
status = hub_clear_tt_buffer(hdev, clear->devinfo, clear->tt);
|
|
if (status && status != -ENODEV)
|
|
dev_err(&hdev->dev,
|
|
"clear tt %d (%04x) error %d\n",
|
|
clear->tt, clear->devinfo, status);
|
|
|
|
/* Tell the HCD, even if the operation failed */
|
|
drv = clear->hcd->driver;
|
|
if (drv->clear_tt_buffer_complete)
|
|
(drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
|
|
|
|
kfree(clear);
|
|
spin_lock_irqsave(&hub->tt.lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(&hub->tt.lock, flags);
|
|
}
|
|
|
|
/**
|
|
* usb_hub_set_port_power - control hub port's power state
|
|
* @hdev: USB device belonging to the usb hub
|
|
* @hub: target hub
|
|
* @port1: port index
|
|
* @set: expected status
|
|
*
|
|
* call this function to control port's power via setting or
|
|
* clearing the port's PORT_POWER feature.
|
|
*
|
|
* Return: 0 if successful. A negative error code otherwise.
|
|
*/
|
|
int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
|
|
int port1, bool set)
|
|
{
|
|
int ret;
|
|
|
|
if (set)
|
|
ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
|
|
else
|
|
ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (set)
|
|
set_bit(port1, hub->power_bits);
|
|
else
|
|
clear_bit(port1, hub->power_bits);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
|
|
* @urb: an URB associated with the failed or incomplete split transaction
|
|
*
|
|
* High speed HCDs use this to tell the hub driver that some split control or
|
|
* bulk transaction failed in a way that requires clearing internal state of
|
|
* a transaction translator. This is normally detected (and reported) from
|
|
* interrupt context.
|
|
*
|
|
* It may not be possible for that hub to handle additional full (or low)
|
|
* speed transactions until that state is fully cleared out.
|
|
*
|
|
* Return: 0 if successful. A negative error code otherwise.
|
|
*/
|
|
int usb_hub_clear_tt_buffer(struct urb *urb)
|
|
{
|
|
struct usb_device *udev = urb->dev;
|
|
int pipe = urb->pipe;
|
|
struct usb_tt *tt = udev->tt;
|
|
unsigned long flags;
|
|
struct usb_tt_clear *clear;
|
|
|
|
/* we've got to cope with an arbitrary number of pending TT clears,
|
|
* since each TT has "at least two" buffers that can need it (and
|
|
* there can be many TTs per hub). even if they're uncommon.
|
|
*/
|
|
clear = kmalloc(sizeof *clear, GFP_ATOMIC);
|
|
if (clear == NULL) {
|
|
dev_err(&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
|
|
/* FIXME recover somehow ... RESET_TT? */
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* info that CLEAR_TT_BUFFER needs */
|
|
clear->tt = tt->multi ? udev->ttport : 1;
|
|
clear->devinfo = usb_pipeendpoint (pipe);
|
|
clear->devinfo |= ((u16)udev->devaddr) << 4;
|
|
clear->devinfo |= usb_pipecontrol(pipe)
|
|
? (USB_ENDPOINT_XFER_CONTROL << 11)
|
|
: (USB_ENDPOINT_XFER_BULK << 11);
|
|
if (usb_pipein(pipe))
|
|
clear->devinfo |= 1 << 15;
|
|
|
|
/* info for completion callback */
|
|
clear->hcd = bus_to_hcd(udev->bus);
|
|
clear->ep = urb->ep;
|
|
|
|
/* tell keventd to clear state for this TT */
|
|
spin_lock_irqsave(&tt->lock, flags);
|
|
list_add_tail(&clear->clear_list, &tt->clear_list);
|
|
schedule_work(&tt->clear_work);
|
|
spin_unlock_irqrestore(&tt->lock, flags);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
|
|
|
|
static void hub_power_on(struct usb_hub *hub, bool do_delay)
|
|
{
|
|
int port1;
|
|
|
|
/* Enable power on each port. Some hubs have reserved values
|
|
* of LPSM (> 2) in their descriptors, even though they are
|
|
* USB 2.0 hubs. Some hubs do not implement port-power switching
|
|
* but only emulate it. In all cases, the ports won't work
|
|
* unless we send these messages to the hub.
|
|
*/
|
|
if (hub_is_port_power_switchable(hub))
|
|
dev_dbg(hub->intfdev, "enabling power on all ports\n");
|
|
else
|
|
dev_dbg(hub->intfdev, "trying to enable port power on "
|
|
"non-switchable hub\n");
|
|
for (port1 = 1; port1 <= hub->hdev->maxchild; port1++)
|
|
if (test_bit(port1, hub->power_bits))
|
|
set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
|
|
else
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_POWER);
|
|
if (do_delay)
|
|
msleep(hub_power_on_good_delay(hub));
|
|
}
|
|
|
|
static int hub_hub_status(struct usb_hub *hub,
|
|
u16 *status, u16 *change)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&hub->status_mutex);
|
|
ret = get_hub_status(hub->hdev, &hub->status->hub);
|
|
if (ret < 0) {
|
|
if (ret != -ENODEV)
|
|
dev_err(hub->intfdev,
|
|
"%s failed (err = %d)\n", __func__, ret);
|
|
} else {
|
|
*status = le16_to_cpu(hub->status->hub.wHubStatus);
|
|
*change = le16_to_cpu(hub->status->hub.wHubChange);
|
|
ret = 0;
|
|
}
|
|
mutex_unlock(&hub->status_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int hub_set_port_link_state(struct usb_hub *hub, int port1,
|
|
unsigned int link_status)
|
|
{
|
|
return set_port_feature(hub->hdev,
|
|
port1 | (link_status << 3),
|
|
USB_PORT_FEAT_LINK_STATE);
|
|
}
|
|
|
|
/*
|
|
* Disable a port and mark a logical connect-change event, so that some
|
|
* time later hub_wq will disconnect() any existing usb_device on the port
|
|
* and will re-enumerate if there actually is a device attached.
|
|
*/
|
|
static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
|
|
{
|
|
dev_dbg(&hub->ports[port1 - 1]->dev, "logical disconnect\n");
|
|
hub_port_disable(hub, port1, 1);
|
|
|
|
/* FIXME let caller ask to power down the port:
|
|
* - some devices won't enumerate without a VBUS power cycle
|
|
* - SRP saves power that way
|
|
* - ... new call, TBD ...
|
|
* That's easy if this hub can switch power per-port, and
|
|
* hub_wq reactivates the port later (timer, SRP, etc).
|
|
* Powerdown must be optional, because of reset/DFU.
|
|
*/
|
|
|
|
set_bit(port1, hub->change_bits);
|
|
kick_hub_wq(hub);
|
|
}
|
|
|
|
/**
|
|
* usb_remove_device - disable a device's port on its parent hub
|
|
* @udev: device to be disabled and removed
|
|
* Context: @udev locked, must be able to sleep.
|
|
*
|
|
* After @udev's port has been disabled, hub_wq is notified and it will
|
|
* see that the device has been disconnected. When the device is
|
|
* physically unplugged and something is plugged in, the events will
|
|
* be received and processed normally.
|
|
*
|
|
* Return: 0 if successful. A negative error code otherwise.
|
|
*/
|
|
int usb_remove_device(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub;
|
|
struct usb_interface *intf;
|
|
int ret;
|
|
|
|
if (!udev->parent) /* Can't remove a root hub */
|
|
return -EINVAL;
|
|
hub = usb_hub_to_struct_hub(udev->parent);
|
|
intf = to_usb_interface(hub->intfdev);
|
|
|
|
ret = usb_autopm_get_interface(intf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
set_bit(udev->portnum, hub->removed_bits);
|
|
hub_port_logical_disconnect(hub, udev->portnum);
|
|
usb_autopm_put_interface(intf);
|
|
return 0;
|
|
}
|
|
|
|
enum hub_activation_type {
|
|
HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */
|
|
HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME,
|
|
};
|
|
|
|
static void hub_init_func2(struct work_struct *ws);
|
|
static void hub_init_func3(struct work_struct *ws);
|
|
|
|
static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
|
|
{
|
|
struct usb_device *hdev = hub->hdev;
|
|
struct usb_hcd *hcd;
|
|
int ret;
|
|
int port1;
|
|
int status;
|
|
bool need_debounce_delay = false;
|
|
unsigned delay;
|
|
|
|
/* Continue a partial initialization */
|
|
if (type == HUB_INIT2 || type == HUB_INIT3) {
|
|
device_lock(&hdev->dev);
|
|
|
|
/* Was the hub disconnected while we were waiting? */
|
|
if (hub->disconnected)
|
|
goto disconnected;
|
|
if (type == HUB_INIT2)
|
|
goto init2;
|
|
goto init3;
|
|
}
|
|
kref_get(&hub->kref);
|
|
|
|
/* The superspeed hub except for root hub has to use Hub Depth
|
|
* value as an offset into the route string to locate the bits
|
|
* it uses to determine the downstream port number. So hub driver
|
|
* should send a set hub depth request to superspeed hub after
|
|
* the superspeed hub is set configuration in initialization or
|
|
* reset procedure.
|
|
*
|
|
* After a resume, port power should still be on.
|
|
* For any other type of activation, turn it on.
|
|
*/
|
|
if (type != HUB_RESUME) {
|
|
if (hdev->parent && hub_is_superspeed(hdev)) {
|
|
ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
|
|
HUB_SET_DEPTH, USB_RT_HUB,
|
|
hdev->level - 1, 0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
if (ret < 0)
|
|
dev_err(hub->intfdev,
|
|
"set hub depth failed\n");
|
|
}
|
|
|
|
/* Speed up system boot by using a delayed_work for the
|
|
* hub's initial power-up delays. This is pretty awkward
|
|
* and the implementation looks like a home-brewed sort of
|
|
* setjmp/longjmp, but it saves at least 100 ms for each
|
|
* root hub (assuming usbcore is compiled into the kernel
|
|
* rather than as a module). It adds up.
|
|
*
|
|
* This can't be done for HUB_RESUME or HUB_RESET_RESUME
|
|
* because for those activation types the ports have to be
|
|
* operational when we return. In theory this could be done
|
|
* for HUB_POST_RESET, but it's easier not to.
|
|
*/
|
|
if (type == HUB_INIT) {
|
|
delay = hub_power_on_good_delay(hub);
|
|
|
|
hub_power_on(hub, false);
|
|
INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&hub->init_work,
|
|
msecs_to_jiffies(delay));
|
|
|
|
/* Suppress autosuspend until init is done */
|
|
usb_autopm_get_interface_no_resume(
|
|
to_usb_interface(hub->intfdev));
|
|
return; /* Continues at init2: below */
|
|
} else if (type == HUB_RESET_RESUME) {
|
|
/* The internal host controller state for the hub device
|
|
* may be gone after a host power loss on system resume.
|
|
* Update the device's info so the HW knows it's a hub.
|
|
*/
|
|
hcd = bus_to_hcd(hdev->bus);
|
|
if (hcd->driver->update_hub_device) {
|
|
ret = hcd->driver->update_hub_device(hcd, hdev,
|
|
&hub->tt, GFP_NOIO);
|
|
if (ret < 0) {
|
|
dev_err(hub->intfdev,
|
|
"Host not accepting hub info update\n");
|
|
dev_err(hub->intfdev,
|
|
"LS/FS devices and hubs may not work under this hub\n");
|
|
}
|
|
}
|
|
hub_power_on(hub, true);
|
|
} else {
|
|
hub_power_on(hub, true);
|
|
}
|
|
}
|
|
init2:
|
|
|
|
/*
|
|
* Check each port and set hub->change_bits to let hub_wq know
|
|
* which ports need attention.
|
|
*/
|
|
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
struct usb_device *udev = port_dev->child;
|
|
u16 portstatus, portchange;
|
|
|
|
portstatus = portchange = 0;
|
|
status = hub_port_status(hub, port1, &portstatus, &portchange);
|
|
if (status)
|
|
goto abort;
|
|
|
|
if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
|
|
dev_dbg(&port_dev->dev, "status %04x change %04x\n",
|
|
portstatus, portchange);
|
|
|
|
/*
|
|
* After anything other than HUB_RESUME (i.e., initialization
|
|
* or any sort of reset), every port should be disabled.
|
|
* Unconnected ports should likewise be disabled (paranoia),
|
|
* and so should ports for which we have no usb_device.
|
|
*/
|
|
if ((portstatus & USB_PORT_STAT_ENABLE) && (
|
|
type != HUB_RESUME ||
|
|
!(portstatus & USB_PORT_STAT_CONNECTION) ||
|
|
!udev ||
|
|
udev->state == USB_STATE_NOTATTACHED)) {
|
|
/*
|
|
* USB3 protocol ports will automatically transition
|
|
* to Enabled state when detect an USB3.0 device attach.
|
|
* Do not disable USB3 protocol ports, just pretend
|
|
* power was lost
|
|
*/
|
|
portstatus &= ~USB_PORT_STAT_ENABLE;
|
|
if (!hub_is_superspeed(hdev))
|
|
usb_clear_port_feature(hdev, port1,
|
|
USB_PORT_FEAT_ENABLE);
|
|
}
|
|
|
|
/* Make sure a warm-reset request is handled by port_event */
|
|
if (type == HUB_RESUME &&
|
|
hub_port_warm_reset_required(hub, port1, portstatus))
|
|
set_bit(port1, hub->event_bits);
|
|
|
|
/*
|
|
* Add debounce if USB3 link is in polling/link training state.
|
|
* Link will automatically transition to Enabled state after
|
|
* link training completes.
|
|
*/
|
|
if (hub_is_superspeed(hdev) &&
|
|
((portstatus & USB_PORT_STAT_LINK_STATE) ==
|
|
USB_SS_PORT_LS_POLLING))
|
|
need_debounce_delay = true;
|
|
|
|
/* Clear status-change flags; we'll debounce later */
|
|
if (portchange & USB_PORT_STAT_C_CONNECTION) {
|
|
need_debounce_delay = true;
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_CONNECTION);
|
|
}
|
|
if (portchange & USB_PORT_STAT_C_ENABLE) {
|
|
need_debounce_delay = true;
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_ENABLE);
|
|
}
|
|
if (portchange & USB_PORT_STAT_C_RESET) {
|
|
need_debounce_delay = true;
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_RESET);
|
|
}
|
|
if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
|
|
hub_is_superspeed(hub->hdev)) {
|
|
need_debounce_delay = true;
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_BH_PORT_RESET);
|
|
}
|
|
/* We can forget about a "removed" device when there's a
|
|
* physical disconnect or the connect status changes.
|
|
*/
|
|
if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
|
|
(portchange & USB_PORT_STAT_C_CONNECTION))
|
|
clear_bit(port1, hub->removed_bits);
|
|
|
|
if (!udev || udev->state == USB_STATE_NOTATTACHED) {
|
|
/* Tell hub_wq to disconnect the device or
|
|
* check for a new connection or over current condition.
|
|
* Based on USB2.0 Spec Section 11.12.5,
|
|
* C_PORT_OVER_CURRENT could be set while
|
|
* PORT_OVER_CURRENT is not. So check for any of them.
|
|
*/
|
|
if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
|
|
(portchange & USB_PORT_STAT_C_CONNECTION) ||
|
|
(portstatus & USB_PORT_STAT_OVERCURRENT) ||
|
|
(portchange & USB_PORT_STAT_C_OVERCURRENT))
|
|
set_bit(port1, hub->change_bits);
|
|
|
|
} else if (portstatus & USB_PORT_STAT_ENABLE) {
|
|
bool port_resumed = (portstatus &
|
|
USB_PORT_STAT_LINK_STATE) ==
|
|
USB_SS_PORT_LS_U0;
|
|
/* The power session apparently survived the resume.
|
|
* If there was an overcurrent or suspend change
|
|
* (i.e., remote wakeup request), have hub_wq
|
|
* take care of it. Look at the port link state
|
|
* for USB 3.0 hubs, since they don't have a suspend
|
|
* change bit, and they don't set the port link change
|
|
* bit on device-initiated resume.
|
|
*/
|
|
if (portchange || (hub_is_superspeed(hub->hdev) &&
|
|
port_resumed))
|
|
set_bit(port1, hub->change_bits);
|
|
|
|
} else if (udev->persist_enabled) {
|
|
#ifdef CONFIG_PM
|
|
udev->reset_resume = 1;
|
|
#endif
|
|
/* Don't set the change_bits when the device
|
|
* was powered off.
|
|
*/
|
|
if (test_bit(port1, hub->power_bits))
|
|
set_bit(port1, hub->change_bits);
|
|
|
|
} else {
|
|
/* The power session is gone; tell hub_wq */
|
|
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
|
|
set_bit(port1, hub->change_bits);
|
|
}
|
|
}
|
|
|
|
/* If no port-status-change flags were set, we don't need any
|
|
* debouncing. If flags were set we can try to debounce the
|
|
* ports all at once right now, instead of letting hub_wq do them
|
|
* one at a time later on.
|
|
*
|
|
* If any port-status changes do occur during this delay, hub_wq
|
|
* will see them later and handle them normally.
|
|
*/
|
|
if (need_debounce_delay) {
|
|
delay = HUB_DEBOUNCE_STABLE;
|
|
|
|
/* Don't do a long sleep inside a workqueue routine */
|
|
if (type == HUB_INIT2) {
|
|
INIT_DELAYED_WORK(&hub->init_work, hub_init_func3);
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&hub->init_work,
|
|
msecs_to_jiffies(delay));
|
|
device_unlock(&hdev->dev);
|
|
return; /* Continues at init3: below */
|
|
} else {
|
|
msleep(delay);
|
|
}
|
|
}
|
|
init3:
|
|
hub->quiescing = 0;
|
|
|
|
status = usb_submit_urb(hub->urb, GFP_NOIO);
|
|
if (status < 0)
|
|
dev_err(hub->intfdev, "activate --> %d\n", status);
|
|
if (hub->has_indicators && blinkenlights)
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&hub->leds, LED_CYCLE_PERIOD);
|
|
|
|
/* Scan all ports that need attention */
|
|
kick_hub_wq(hub);
|
|
abort:
|
|
if (type == HUB_INIT2 || type == HUB_INIT3) {
|
|
/* Allow autosuspend if it was suppressed */
|
|
disconnected:
|
|
usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
|
|
device_unlock(&hdev->dev);
|
|
}
|
|
|
|
kref_put(&hub->kref, hub_release);
|
|
}
|
|
|
|
/* Implement the continuations for the delays above */
|
|
static void hub_init_func2(struct work_struct *ws)
|
|
{
|
|
struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work);
|
|
|
|
hub_activate(hub, HUB_INIT2);
|
|
}
|
|
|
|
static void hub_init_func3(struct work_struct *ws)
|
|
{
|
|
struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work);
|
|
|
|
hub_activate(hub, HUB_INIT3);
|
|
}
|
|
|
|
enum hub_quiescing_type {
|
|
HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND
|
|
};
|
|
|
|
static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
|
|
{
|
|
struct usb_device *hdev = hub->hdev;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
/* hub_wq and related activity won't re-trigger */
|
|
spin_lock_irqsave(&hub->irq_urb_lock, flags);
|
|
hub->quiescing = 1;
|
|
spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
|
|
|
|
if (type != HUB_SUSPEND) {
|
|
/* Disconnect all the children */
|
|
for (i = 0; i < hdev->maxchild; ++i) {
|
|
if (hub->ports[i]->child)
|
|
usb_disconnect(&hub->ports[i]->child);
|
|
}
|
|
}
|
|
|
|
/* Stop hub_wq and related activity */
|
|
del_timer_sync(&hub->irq_urb_retry);
|
|
usb_kill_urb(hub->urb);
|
|
if (hub->has_indicators)
|
|
cancel_delayed_work_sync(&hub->leds);
|
|
if (hub->tt.hub)
|
|
flush_work(&hub->tt.clear_work);
|
|
}
|
|
|
|
static void hub_pm_barrier_for_all_ports(struct usb_hub *hub)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < hub->hdev->maxchild; ++i)
|
|
pm_runtime_barrier(&hub->ports[i]->dev);
|
|
}
|
|
|
|
/* caller has locked the hub device */
|
|
static int hub_pre_reset(struct usb_interface *intf)
|
|
{
|
|
struct usb_hub *hub = usb_get_intfdata(intf);
|
|
|
|
hub_quiesce(hub, HUB_PRE_RESET);
|
|
hub->in_reset = 1;
|
|
hub_pm_barrier_for_all_ports(hub);
|
|
return 0;
|
|
}
|
|
|
|
/* caller has locked the hub device */
|
|
static int hub_post_reset(struct usb_interface *intf)
|
|
{
|
|
struct usb_hub *hub = usb_get_intfdata(intf);
|
|
|
|
hub->in_reset = 0;
|
|
hub_pm_barrier_for_all_ports(hub);
|
|
hub_activate(hub, HUB_POST_RESET);
|
|
return 0;
|
|
}
|
|
|
|
static int hub_configure(struct usb_hub *hub,
|
|
struct usb_endpoint_descriptor *endpoint)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
struct usb_device *hdev = hub->hdev;
|
|
struct device *hub_dev = hub->intfdev;
|
|
u16 hubstatus, hubchange;
|
|
u16 wHubCharacteristics;
|
|
unsigned int pipe;
|
|
int maxp, ret, i;
|
|
char *message = "out of memory";
|
|
unsigned unit_load;
|
|
unsigned full_load;
|
|
unsigned maxchild;
|
|
|
|
hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
|
|
if (!hub->buffer) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL);
|
|
if (!hub->status) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
mutex_init(&hub->status_mutex);
|
|
|
|
hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL);
|
|
if (!hub->descriptor) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/* Request the entire hub descriptor.
|
|
* hub->descriptor can handle USB_MAXCHILDREN ports,
|
|
* but a (non-SS) hub can/will return fewer bytes here.
|
|
*/
|
|
ret = get_hub_descriptor(hdev, hub->descriptor);
|
|
if (ret < 0) {
|
|
message = "can't read hub descriptor";
|
|
goto fail;
|
|
}
|
|
|
|
maxchild = USB_MAXCHILDREN;
|
|
if (hub_is_superspeed(hdev))
|
|
maxchild = min_t(unsigned, maxchild, USB_SS_MAXPORTS);
|
|
|
|
if (hub->descriptor->bNbrPorts > maxchild) {
|
|
message = "hub has too many ports!";
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
} else if (hub->descriptor->bNbrPorts == 0) {
|
|
message = "hub doesn't have any ports!";
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Accumulate wHubDelay + 40ns for every hub in the tree of devices.
|
|
* The resulting value will be used for SetIsochDelay() request.
|
|
*/
|
|
if (hub_is_superspeed(hdev) || hub_is_superspeedplus(hdev)) {
|
|
u32 delay = __le16_to_cpu(hub->descriptor->u.ss.wHubDelay);
|
|
|
|
if (hdev->parent)
|
|
delay += hdev->parent->hub_delay;
|
|
|
|
delay += USB_TP_TRANSMISSION_DELAY;
|
|
hdev->hub_delay = min_t(u32, delay, USB_TP_TRANSMISSION_DELAY_MAX);
|
|
}
|
|
|
|
maxchild = hub->descriptor->bNbrPorts;
|
|
dev_info(hub_dev, "%d port%s detected\n", maxchild,
|
|
(maxchild == 1) ? "" : "s");
|
|
|
|
hub->ports = kcalloc(maxchild, sizeof(struct usb_port *), GFP_KERNEL);
|
|
if (!hub->ports) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
|
|
if (hub_is_superspeed(hdev)) {
|
|
unit_load = 150;
|
|
full_load = 900;
|
|
} else {
|
|
unit_load = 100;
|
|
full_load = 500;
|
|
}
|
|
|
|
/* FIXME for USB 3.0, skip for now */
|
|
if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
|
|
!(hub_is_superspeed(hdev))) {
|
|
char portstr[USB_MAXCHILDREN + 1];
|
|
|
|
for (i = 0; i < maxchild; i++)
|
|
portstr[i] = hub->descriptor->u.hs.DeviceRemovable
|
|
[((i + 1) / 8)] & (1 << ((i + 1) % 8))
|
|
? 'F' : 'R';
|
|
portstr[maxchild] = 0;
|
|
dev_dbg(hub_dev, "compound device; port removable status: %s\n", portstr);
|
|
} else
|
|
dev_dbg(hub_dev, "standalone hub\n");
|
|
|
|
switch (wHubCharacteristics & HUB_CHAR_LPSM) {
|
|
case HUB_CHAR_COMMON_LPSM:
|
|
dev_dbg(hub_dev, "ganged power switching\n");
|
|
break;
|
|
case HUB_CHAR_INDV_PORT_LPSM:
|
|
dev_dbg(hub_dev, "individual port power switching\n");
|
|
break;
|
|
case HUB_CHAR_NO_LPSM:
|
|
case HUB_CHAR_LPSM:
|
|
dev_dbg(hub_dev, "no power switching (usb 1.0)\n");
|
|
break;
|
|
}
|
|
|
|
switch (wHubCharacteristics & HUB_CHAR_OCPM) {
|
|
case HUB_CHAR_COMMON_OCPM:
|
|
dev_dbg(hub_dev, "global over-current protection\n");
|
|
break;
|
|
case HUB_CHAR_INDV_PORT_OCPM:
|
|
dev_dbg(hub_dev, "individual port over-current protection\n");
|
|
break;
|
|
case HUB_CHAR_NO_OCPM:
|
|
case HUB_CHAR_OCPM:
|
|
dev_dbg(hub_dev, "no over-current protection\n");
|
|
break;
|
|
}
|
|
|
|
spin_lock_init(&hub->tt.lock);
|
|
INIT_LIST_HEAD(&hub->tt.clear_list);
|
|
INIT_WORK(&hub->tt.clear_work, hub_tt_work);
|
|
switch (hdev->descriptor.bDeviceProtocol) {
|
|
case USB_HUB_PR_FS:
|
|
break;
|
|
case USB_HUB_PR_HS_SINGLE_TT:
|
|
dev_dbg(hub_dev, "Single TT\n");
|
|
hub->tt.hub = hdev;
|
|
break;
|
|
case USB_HUB_PR_HS_MULTI_TT:
|
|
ret = usb_set_interface(hdev, 0, 1);
|
|
if (ret == 0) {
|
|
dev_dbg(hub_dev, "TT per port\n");
|
|
hub->tt.multi = 1;
|
|
} else
|
|
dev_err(hub_dev, "Using single TT (err %d)\n",
|
|
ret);
|
|
hub->tt.hub = hdev;
|
|
break;
|
|
case USB_HUB_PR_SS:
|
|
/* USB 3.0 hubs don't have a TT */
|
|
break;
|
|
default:
|
|
dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
|
|
hdev->descriptor.bDeviceProtocol);
|
|
break;
|
|
}
|
|
|
|
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
|
|
switch (wHubCharacteristics & HUB_CHAR_TTTT) {
|
|
case HUB_TTTT_8_BITS:
|
|
if (hdev->descriptor.bDeviceProtocol != 0) {
|
|
hub->tt.think_time = 666;
|
|
dev_dbg(hub_dev, "TT requires at most %d "
|
|
"FS bit times (%d ns)\n",
|
|
8, hub->tt.think_time);
|
|
}
|
|
break;
|
|
case HUB_TTTT_16_BITS:
|
|
hub->tt.think_time = 666 * 2;
|
|
dev_dbg(hub_dev, "TT requires at most %d "
|
|
"FS bit times (%d ns)\n",
|
|
16, hub->tt.think_time);
|
|
break;
|
|
case HUB_TTTT_24_BITS:
|
|
hub->tt.think_time = 666 * 3;
|
|
dev_dbg(hub_dev, "TT requires at most %d "
|
|
"FS bit times (%d ns)\n",
|
|
24, hub->tt.think_time);
|
|
break;
|
|
case HUB_TTTT_32_BITS:
|
|
hub->tt.think_time = 666 * 4;
|
|
dev_dbg(hub_dev, "TT requires at most %d "
|
|
"FS bit times (%d ns)\n",
|
|
32, hub->tt.think_time);
|
|
break;
|
|
}
|
|
|
|
/* probe() zeroes hub->indicator[] */
|
|
if (wHubCharacteristics & HUB_CHAR_PORTIND) {
|
|
hub->has_indicators = 1;
|
|
dev_dbg(hub_dev, "Port indicators are supported\n");
|
|
}
|
|
|
|
dev_dbg(hub_dev, "power on to power good time: %dms\n",
|
|
hub->descriptor->bPwrOn2PwrGood * 2);
|
|
|
|
/* power budgeting mostly matters with bus-powered hubs,
|
|
* and battery-powered root hubs (may provide just 8 mA).
|
|
*/
|
|
ret = usb_get_std_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus);
|
|
if (ret) {
|
|
message = "can't get hub status";
|
|
goto fail;
|
|
}
|
|
hcd = bus_to_hcd(hdev->bus);
|
|
if (hdev == hdev->bus->root_hub) {
|
|
if (hcd->power_budget > 0)
|
|
hdev->bus_mA = hcd->power_budget;
|
|
else
|
|
hdev->bus_mA = full_load * maxchild;
|
|
if (hdev->bus_mA >= full_load)
|
|
hub->mA_per_port = full_load;
|
|
else {
|
|
hub->mA_per_port = hdev->bus_mA;
|
|
hub->limited_power = 1;
|
|
}
|
|
} else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
|
|
int remaining = hdev->bus_mA -
|
|
hub->descriptor->bHubContrCurrent;
|
|
|
|
dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
|
|
hub->descriptor->bHubContrCurrent);
|
|
hub->limited_power = 1;
|
|
|
|
if (remaining < maxchild * unit_load)
|
|
dev_warn(hub_dev,
|
|
"insufficient power available "
|
|
"to use all downstream ports\n");
|
|
hub->mA_per_port = unit_load; /* 7.2.1 */
|
|
|
|
} else { /* Self-powered external hub */
|
|
/* FIXME: What about battery-powered external hubs that
|
|
* provide less current per port? */
|
|
hub->mA_per_port = full_load;
|
|
}
|
|
if (hub->mA_per_port < full_load)
|
|
dev_dbg(hub_dev, "%umA bus power budget for each child\n",
|
|
hub->mA_per_port);
|
|
|
|
ret = hub_hub_status(hub, &hubstatus, &hubchange);
|
|
if (ret < 0) {
|
|
message = "can't get hub status";
|
|
goto fail;
|
|
}
|
|
|
|
/* local power status reports aren't always correct */
|
|
if (hdev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_SELFPOWER)
|
|
dev_dbg(hub_dev, "local power source is %s\n",
|
|
(hubstatus & HUB_STATUS_LOCAL_POWER)
|
|
? "lost (inactive)" : "good");
|
|
|
|
if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
|
|
dev_dbg(hub_dev, "%sover-current condition exists\n",
|
|
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
|
|
|
|
/* set up the interrupt endpoint
|
|
* We use the EP's maxpacket size instead of (PORTS+1+7)/8
|
|
* bytes as USB2.0[11.12.3] says because some hubs are known
|
|
* to send more data (and thus cause overflow). For root hubs,
|
|
* maxpktsize is defined in hcd.c's fake endpoint descriptors
|
|
* to be big enough for at least USB_MAXCHILDREN ports. */
|
|
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
|
|
maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
|
|
|
|
if (maxp > sizeof(*hub->buffer))
|
|
maxp = sizeof(*hub->buffer);
|
|
|
|
hub->urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!hub->urb) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
usb_fill_int_urb(hub->urb, hdev, pipe, *hub->buffer, maxp, hub_irq,
|
|
hub, endpoint->bInterval);
|
|
|
|
/* maybe cycle the hub leds */
|
|
if (hub->has_indicators && blinkenlights)
|
|
hub->indicator[0] = INDICATOR_CYCLE;
|
|
|
|
mutex_lock(&usb_port_peer_mutex);
|
|
for (i = 0; i < maxchild; i++) {
|
|
ret = usb_hub_create_port_device(hub, i + 1);
|
|
if (ret < 0) {
|
|
dev_err(hub->intfdev,
|
|
"couldn't create port%d device.\n", i + 1);
|
|
break;
|
|
}
|
|
}
|
|
hdev->maxchild = i;
|
|
for (i = 0; i < hdev->maxchild; i++) {
|
|
struct usb_port *port_dev = hub->ports[i];
|
|
|
|
pm_runtime_put(&port_dev->dev);
|
|
}
|
|
|
|
mutex_unlock(&usb_port_peer_mutex);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
/* Update the HCD's internal representation of this hub before hub_wq
|
|
* starts getting port status changes for devices under the hub.
|
|
*/
|
|
if (hcd->driver->update_hub_device) {
|
|
ret = hcd->driver->update_hub_device(hcd, hdev,
|
|
&hub->tt, GFP_KERNEL);
|
|
if (ret < 0) {
|
|
message = "can't update HCD hub info";
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
usb_hub_adjust_deviceremovable(hdev, hub->descriptor);
|
|
|
|
hub_activate(hub, HUB_INIT);
|
|
return 0;
|
|
|
|
fail:
|
|
dev_err(hub_dev, "config failed, %s (err %d)\n",
|
|
message, ret);
|
|
/* hub_disconnect() frees urb and descriptor */
|
|
return ret;
|
|
}
|
|
|
|
static void hub_release(struct kref *kref)
|
|
{
|
|
struct usb_hub *hub = container_of(kref, struct usb_hub, kref);
|
|
|
|
usb_put_dev(hub->hdev);
|
|
usb_put_intf(to_usb_interface(hub->intfdev));
|
|
kfree(hub);
|
|
}
|
|
|
|
static unsigned highspeed_hubs;
|
|
|
|
static void hub_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct usb_hub *hub = usb_get_intfdata(intf);
|
|
struct usb_device *hdev = interface_to_usbdev(intf);
|
|
int port1;
|
|
|
|
/*
|
|
* Stop adding new hub events. We do not want to block here and thus
|
|
* will not try to remove any pending work item.
|
|
*/
|
|
hub->disconnected = 1;
|
|
|
|
/* Disconnect all children and quiesce the hub */
|
|
hub->error = 0;
|
|
hub_quiesce(hub, HUB_DISCONNECT);
|
|
|
|
mutex_lock(&usb_port_peer_mutex);
|
|
|
|
/* Avoid races with recursively_mark_NOTATTACHED() */
|
|
spin_lock_irq(&device_state_lock);
|
|
port1 = hdev->maxchild;
|
|
hdev->maxchild = 0;
|
|
usb_set_intfdata(intf, NULL);
|
|
spin_unlock_irq(&device_state_lock);
|
|
|
|
for (; port1 > 0; --port1)
|
|
usb_hub_remove_port_device(hub, port1);
|
|
|
|
mutex_unlock(&usb_port_peer_mutex);
|
|
|
|
if (hub->hdev->speed == USB_SPEED_HIGH)
|
|
highspeed_hubs--;
|
|
|
|
usb_free_urb(hub->urb);
|
|
kfree(hub->ports);
|
|
kfree(hub->descriptor);
|
|
kfree(hub->status);
|
|
kfree(hub->buffer);
|
|
|
|
pm_suspend_ignore_children(&intf->dev, false);
|
|
|
|
if (hub->quirk_disable_autosuspend)
|
|
usb_autopm_put_interface(intf);
|
|
|
|
kref_put(&hub->kref, hub_release);
|
|
}
|
|
|
|
static bool hub_descriptor_is_sane(struct usb_host_interface *desc)
|
|
{
|
|
/* Some hubs have a subclass of 1, which AFAICT according to the */
|
|
/* specs is not defined, but it works */
|
|
if (desc->desc.bInterfaceSubClass != 0 &&
|
|
desc->desc.bInterfaceSubClass != 1)
|
|
return false;
|
|
|
|
/* Multiple endpoints? What kind of mutant ninja-hub is this? */
|
|
if (desc->desc.bNumEndpoints != 1)
|
|
return false;
|
|
|
|
/* If the first endpoint is not interrupt IN, we'd better punt! */
|
|
if (!usb_endpoint_is_int_in(&desc->endpoint[0].desc))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
|
|
{
|
|
struct usb_host_interface *desc;
|
|
struct usb_device *hdev;
|
|
struct usb_hub *hub;
|
|
|
|
desc = intf->cur_altsetting;
|
|
hdev = interface_to_usbdev(intf);
|
|
|
|
/*
|
|
* Set default autosuspend delay as 0 to speedup bus suspend,
|
|
* based on the below considerations:
|
|
*
|
|
* - Unlike other drivers, the hub driver does not rely on the
|
|
* autosuspend delay to provide enough time to handle a wakeup
|
|
* event, and the submitted status URB is just to check future
|
|
* change on hub downstream ports, so it is safe to do it.
|
|
*
|
|
* - The patch might cause one or more auto supend/resume for
|
|
* below very rare devices when they are plugged into hub
|
|
* first time:
|
|
*
|
|
* devices having trouble initializing, and disconnect
|
|
* themselves from the bus and then reconnect a second
|
|
* or so later
|
|
*
|
|
* devices just for downloading firmware, and disconnects
|
|
* themselves after completing it
|
|
*
|
|
* For these quite rare devices, their drivers may change the
|
|
* autosuspend delay of their parent hub in the probe() to one
|
|
* appropriate value to avoid the subtle problem if someone
|
|
* does care it.
|
|
*
|
|
* - The patch may cause one or more auto suspend/resume on
|
|
* hub during running 'lsusb', but it is probably too
|
|
* infrequent to worry about.
|
|
*
|
|
* - Change autosuspend delay of hub can avoid unnecessary auto
|
|
* suspend timer for hub, also may decrease power consumption
|
|
* of USB bus.
|
|
*
|
|
* - If user has indicated to prevent autosuspend by passing
|
|
* usbcore.autosuspend = -1 then keep autosuspend disabled.
|
|
*/
|
|
#ifdef CONFIG_PM
|
|
if (hdev->dev.power.autosuspend_delay >= 0)
|
|
pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
|
|
#endif
|
|
|
|
/*
|
|
* Hubs have proper suspend/resume support, except for root hubs
|
|
* where the controller driver doesn't have bus_suspend and
|
|
* bus_resume methods.
|
|
*/
|
|
if (hdev->parent) { /* normal device */
|
|
usb_enable_autosuspend(hdev);
|
|
} else { /* root hub */
|
|
const struct hc_driver *drv = bus_to_hcd(hdev->bus)->driver;
|
|
|
|
if (drv->bus_suspend && drv->bus_resume)
|
|
usb_enable_autosuspend(hdev);
|
|
}
|
|
|
|
if (hdev->level == MAX_TOPO_LEVEL) {
|
|
dev_err(&intf->dev,
|
|
"Unsupported bus topology: hub nested too deep\n");
|
|
return -E2BIG;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_OTG_BLACKLIST_HUB
|
|
if (hdev->parent) {
|
|
dev_warn(&intf->dev, "ignoring external hub\n");
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
if (!hub_descriptor_is_sane(desc)) {
|
|
dev_err(&intf->dev, "bad descriptor, ignoring hub\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* We found a hub */
|
|
dev_info(&intf->dev, "USB hub found\n");
|
|
|
|
hub = kzalloc(sizeof(*hub), GFP_KERNEL);
|
|
if (!hub)
|
|
return -ENOMEM;
|
|
|
|
kref_init(&hub->kref);
|
|
hub->intfdev = &intf->dev;
|
|
hub->hdev = hdev;
|
|
INIT_DELAYED_WORK(&hub->leds, led_work);
|
|
INIT_DELAYED_WORK(&hub->init_work, NULL);
|
|
INIT_WORK(&hub->events, hub_event);
|
|
spin_lock_init(&hub->irq_urb_lock);
|
|
timer_setup(&hub->irq_urb_retry, hub_retry_irq_urb, 0);
|
|
usb_get_intf(intf);
|
|
usb_get_dev(hdev);
|
|
|
|
usb_set_intfdata(intf, hub);
|
|
intf->needs_remote_wakeup = 1;
|
|
pm_suspend_ignore_children(&intf->dev, true);
|
|
|
|
if (hdev->speed == USB_SPEED_HIGH)
|
|
highspeed_hubs++;
|
|
|
|
if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
|
|
hub->quirk_check_port_auto_suspend = 1;
|
|
|
|
if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
|
|
hub->quirk_disable_autosuspend = 1;
|
|
usb_autopm_get_interface_no_resume(intf);
|
|
}
|
|
|
|
if (hub_configure(hub, &desc->endpoint[0].desc) >= 0)
|
|
return 0;
|
|
|
|
hub_disconnect(intf);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int
|
|
hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
|
|
{
|
|
struct usb_device *hdev = interface_to_usbdev(intf);
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
|
|
|
|
/* assert ifno == 0 (part of hub spec) */
|
|
switch (code) {
|
|
case USBDEVFS_HUB_PORTINFO: {
|
|
struct usbdevfs_hub_portinfo *info = user_data;
|
|
int i;
|
|
|
|
spin_lock_irq(&device_state_lock);
|
|
if (hdev->devnum <= 0)
|
|
info->nports = 0;
|
|
else {
|
|
info->nports = hdev->maxchild;
|
|
for (i = 0; i < info->nports; i++) {
|
|
if (hub->ports[i]->child == NULL)
|
|
info->port[i] = 0;
|
|
else
|
|
info->port[i] =
|
|
hub->ports[i]->child->devnum;
|
|
}
|
|
}
|
|
spin_unlock_irq(&device_state_lock);
|
|
|
|
return info->nports + 1;
|
|
}
|
|
|
|
default:
|
|
return -ENOSYS;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Allow user programs to claim ports on a hub. When a device is attached
|
|
* to one of these "claimed" ports, the program will "own" the device.
|
|
*/
|
|
static int find_port_owner(struct usb_device *hdev, unsigned port1,
|
|
struct usb_dev_state ***ppowner)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
|
|
|
|
if (hdev->state == USB_STATE_NOTATTACHED)
|
|
return -ENODEV;
|
|
if (port1 == 0 || port1 > hdev->maxchild)
|
|
return -EINVAL;
|
|
|
|
/* Devices not managed by the hub driver
|
|
* will always have maxchild equal to 0.
|
|
*/
|
|
*ppowner = &(hub->ports[port1 - 1]->port_owner);
|
|
return 0;
|
|
}
|
|
|
|
/* In the following three functions, the caller must hold hdev's lock */
|
|
int usb_hub_claim_port(struct usb_device *hdev, unsigned port1,
|
|
struct usb_dev_state *owner)
|
|
{
|
|
int rc;
|
|
struct usb_dev_state **powner;
|
|
|
|
rc = find_port_owner(hdev, port1, &powner);
|
|
if (rc)
|
|
return rc;
|
|
if (*powner)
|
|
return -EBUSY;
|
|
*powner = owner;
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_hub_claim_port);
|
|
|
|
int usb_hub_release_port(struct usb_device *hdev, unsigned port1,
|
|
struct usb_dev_state *owner)
|
|
{
|
|
int rc;
|
|
struct usb_dev_state **powner;
|
|
|
|
rc = find_port_owner(hdev, port1, &powner);
|
|
if (rc)
|
|
return rc;
|
|
if (*powner != owner)
|
|
return -ENOENT;
|
|
*powner = NULL;
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_hub_release_port);
|
|
|
|
void usb_hub_release_all_ports(struct usb_device *hdev, struct usb_dev_state *owner)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
|
|
int n;
|
|
|
|
for (n = 0; n < hdev->maxchild; n++) {
|
|
if (hub->ports[n]->port_owner == owner)
|
|
hub->ports[n]->port_owner = NULL;
|
|
}
|
|
|
|
}
|
|
|
|
/* The caller must hold udev's lock */
|
|
bool usb_device_is_owned(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub;
|
|
|
|
if (udev->state == USB_STATE_NOTATTACHED || !udev->parent)
|
|
return false;
|
|
hub = usb_hub_to_struct_hub(udev->parent);
|
|
return !!hub->ports[udev->portnum - 1]->port_owner;
|
|
}
|
|
|
|
static void recursively_mark_NOTATTACHED(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev);
|
|
int i;
|
|
|
|
for (i = 0; i < udev->maxchild; ++i) {
|
|
if (hub->ports[i]->child)
|
|
recursively_mark_NOTATTACHED(hub->ports[i]->child);
|
|
}
|
|
if (udev->state == USB_STATE_SUSPENDED)
|
|
udev->active_duration -= jiffies;
|
|
udev->state = USB_STATE_NOTATTACHED;
|
|
}
|
|
|
|
/**
|
|
* usb_set_device_state - change a device's current state (usbcore, hcds)
|
|
* @udev: pointer to device whose state should be changed
|
|
* @new_state: new state value to be stored
|
|
*
|
|
* udev->state is _not_ fully protected by the device lock. Although
|
|
* most transitions are made only while holding the lock, the state can
|
|
* can change to USB_STATE_NOTATTACHED at almost any time. This
|
|
* is so that devices can be marked as disconnected as soon as possible,
|
|
* without having to wait for any semaphores to be released. As a result,
|
|
* all changes to any device's state must be protected by the
|
|
* device_state_lock spinlock.
|
|
*
|
|
* Once a device has been added to the device tree, all changes to its state
|
|
* should be made using this routine. The state should _not_ be set directly.
|
|
*
|
|
* If udev->state is already USB_STATE_NOTATTACHED then no change is made.
|
|
* Otherwise udev->state is set to new_state, and if new_state is
|
|
* USB_STATE_NOTATTACHED then all of udev's descendants' states are also set
|
|
* to USB_STATE_NOTATTACHED.
|
|
*/
|
|
void usb_set_device_state(struct usb_device *udev,
|
|
enum usb_device_state new_state)
|
|
{
|
|
unsigned long flags;
|
|
int wakeup = -1;
|
|
|
|
spin_lock_irqsave(&device_state_lock, flags);
|
|
if (udev->state == USB_STATE_NOTATTACHED)
|
|
; /* do nothing */
|
|
else if (new_state != USB_STATE_NOTATTACHED) {
|
|
|
|
/* root hub wakeup capabilities are managed out-of-band
|
|
* and may involve silicon errata ... ignore them here.
|
|
*/
|
|
if (udev->parent) {
|
|
if (udev->state == USB_STATE_SUSPENDED
|
|
|| new_state == USB_STATE_SUSPENDED)
|
|
; /* No change to wakeup settings */
|
|
else if (new_state == USB_STATE_CONFIGURED)
|
|
wakeup = (udev->quirks &
|
|
USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 :
|
|
udev->actconfig->desc.bmAttributes &
|
|
USB_CONFIG_ATT_WAKEUP;
|
|
else
|
|
wakeup = 0;
|
|
}
|
|
if (udev->state == USB_STATE_SUSPENDED &&
|
|
new_state != USB_STATE_SUSPENDED)
|
|
udev->active_duration -= jiffies;
|
|
else if (new_state == USB_STATE_SUSPENDED &&
|
|
udev->state != USB_STATE_SUSPENDED)
|
|
udev->active_duration += jiffies;
|
|
udev->state = new_state;
|
|
} else
|
|
recursively_mark_NOTATTACHED(udev);
|
|
spin_unlock_irqrestore(&device_state_lock, flags);
|
|
if (wakeup >= 0)
|
|
device_set_wakeup_capable(&udev->dev, wakeup);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_set_device_state);
|
|
|
|
/*
|
|
* Choose a device number.
|
|
*
|
|
* Device numbers are used as filenames in usbfs. On USB-1.1 and
|
|
* USB-2.0 buses they are also used as device addresses, however on
|
|
* USB-3.0 buses the address is assigned by the controller hardware
|
|
* and it usually is not the same as the device number.
|
|
*
|
|
* WUSB devices are simple: they have no hubs behind, so the mapping
|
|
* device <-> virtual port number becomes 1:1. Why? to simplify the
|
|
* life of the device connection logic in
|
|
* drivers/usb/wusbcore/devconnect.c. When we do the initial secret
|
|
* handshake we need to assign a temporary address in the unauthorized
|
|
* space. For simplicity we use the first virtual port number found to
|
|
* be free [drivers/usb/wusbcore/devconnect.c:wusbhc_devconnect_ack()]
|
|
* and that becomes it's address [X < 128] or its unauthorized address
|
|
* [X | 0x80].
|
|
*
|
|
* We add 1 as an offset to the one-based USB-stack port number
|
|
* (zero-based wusb virtual port index) for two reasons: (a) dev addr
|
|
* 0 is reserved by USB for default address; (b) Linux's USB stack
|
|
* uses always #1 for the root hub of the controller. So USB stack's
|
|
* port #1, which is wusb virtual-port #0 has address #2.
|
|
*
|
|
* Devices connected under xHCI are not as simple. The host controller
|
|
* supports virtualization, so the hardware assigns device addresses and
|
|
* the HCD must setup data structures before issuing a set address
|
|
* command to the hardware.
|
|
*/
|
|
static void choose_devnum(struct usb_device *udev)
|
|
{
|
|
int devnum;
|
|
struct usb_bus *bus = udev->bus;
|
|
|
|
/* be safe when more hub events are proceed in parallel */
|
|
mutex_lock(&bus->devnum_next_mutex);
|
|
if (udev->wusb) {
|
|
devnum = udev->portnum + 1;
|
|
BUG_ON(test_bit(devnum, bus->devmap.devicemap));
|
|
} else {
|
|
/* Try to allocate the next devnum beginning at
|
|
* bus->devnum_next. */
|
|
devnum = find_next_zero_bit(bus->devmap.devicemap, 128,
|
|
bus->devnum_next);
|
|
if (devnum >= 128)
|
|
devnum = find_next_zero_bit(bus->devmap.devicemap,
|
|
128, 1);
|
|
bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
|
|
}
|
|
if (devnum < 128) {
|
|
set_bit(devnum, bus->devmap.devicemap);
|
|
udev->devnum = devnum;
|
|
}
|
|
mutex_unlock(&bus->devnum_next_mutex);
|
|
}
|
|
|
|
static void release_devnum(struct usb_device *udev)
|
|
{
|
|
if (udev->devnum > 0) {
|
|
clear_bit(udev->devnum, udev->bus->devmap.devicemap);
|
|
udev->devnum = -1;
|
|
}
|
|
}
|
|
|
|
static void update_devnum(struct usb_device *udev, int devnum)
|
|
{
|
|
/* The address for a WUSB device is managed by wusbcore. */
|
|
if (!udev->wusb)
|
|
udev->devnum = devnum;
|
|
if (!udev->devaddr)
|
|
udev->devaddr = (u8)devnum;
|
|
}
|
|
|
|
static void hub_free_dev(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
/* Root hubs aren't real devices, so don't free HCD resources */
|
|
if (hcd->driver->free_dev && udev->parent)
|
|
hcd->driver->free_dev(hcd, udev);
|
|
}
|
|
|
|
static void hub_disconnect_children(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev);
|
|
int i;
|
|
|
|
/* Free up all the children before we remove this device */
|
|
for (i = 0; i < udev->maxchild; i++) {
|
|
if (hub->ports[i]->child)
|
|
usb_disconnect(&hub->ports[i]->child);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* usb_disconnect - disconnect a device (usbcore-internal)
|
|
* @pdev: pointer to device being disconnected
|
|
* Context: !in_interrupt ()
|
|
*
|
|
* Something got disconnected. Get rid of it and all of its children.
|
|
*
|
|
* If *pdev is a normal device then the parent hub must already be locked.
|
|
* If *pdev is a root hub then the caller must hold the usb_bus_idr_lock,
|
|
* which protects the set of root hubs as well as the list of buses.
|
|
*
|
|
* Only hub drivers (including virtual root hub drivers for host
|
|
* controllers) should ever call this.
|
|
*
|
|
* This call is synchronous, and may not be used in an interrupt context.
|
|
*/
|
|
void usb_disconnect(struct usb_device **pdev)
|
|
{
|
|
struct usb_port *port_dev = NULL;
|
|
struct usb_device *udev = *pdev;
|
|
struct usb_hub *hub = NULL;
|
|
int port1 = 1;
|
|
|
|
/* mark the device as inactive, so any further urb submissions for
|
|
* this device (and any of its children) will fail immediately.
|
|
* this quiesces everything except pending urbs.
|
|
*/
|
|
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
|
|
dev_info(&udev->dev, "USB disconnect, device number %d\n",
|
|
udev->devnum);
|
|
|
|
/*
|
|
* Ensure that the pm runtime code knows that the USB device
|
|
* is in the process of being disconnected.
|
|
*/
|
|
pm_runtime_barrier(&udev->dev);
|
|
|
|
usb_lock_device(udev);
|
|
|
|
hub_disconnect_children(udev);
|
|
|
|
/* deallocate hcd/hardware state ... nuking all pending urbs and
|
|
* cleaning up all state associated with the current configuration
|
|
* so that the hardware is now fully quiesced.
|
|
*/
|
|
dev_dbg(&udev->dev, "unregistering device\n");
|
|
usb_disable_device(udev, 0);
|
|
usb_hcd_synchronize_unlinks(udev);
|
|
|
|
if (udev->parent) {
|
|
port1 = udev->portnum;
|
|
hub = usb_hub_to_struct_hub(udev->parent);
|
|
port_dev = hub->ports[port1 - 1];
|
|
|
|
sysfs_remove_link(&udev->dev.kobj, "port");
|
|
sysfs_remove_link(&port_dev->dev.kobj, "device");
|
|
|
|
/*
|
|
* As usb_port_runtime_resume() de-references udev, make
|
|
* sure no resumes occur during removal
|
|
*/
|
|
if (!test_and_set_bit(port1, hub->child_usage_bits))
|
|
pm_runtime_get_sync(&port_dev->dev);
|
|
}
|
|
|
|
usb_remove_ep_devs(&udev->ep0);
|
|
usb_unlock_device(udev);
|
|
|
|
/* Unregister the device. The device driver is responsible
|
|
* for de-configuring the device and invoking the remove-device
|
|
* notifier chain (used by usbfs and possibly others).
|
|
*/
|
|
device_del(&udev->dev);
|
|
|
|
/* Free the device number and delete the parent's children[]
|
|
* (or root_hub) pointer.
|
|
*/
|
|
release_devnum(udev);
|
|
|
|
/* Avoid races with recursively_mark_NOTATTACHED() */
|
|
spin_lock_irq(&device_state_lock);
|
|
*pdev = NULL;
|
|
spin_unlock_irq(&device_state_lock);
|
|
|
|
if (port_dev && test_and_clear_bit(port1, hub->child_usage_bits))
|
|
pm_runtime_put(&port_dev->dev);
|
|
|
|
hub_free_dev(udev);
|
|
|
|
put_device(&udev->dev);
|
|
}
|
|
|
|
#ifdef CONFIG_USB_ANNOUNCE_NEW_DEVICES
|
|
static void show_string(struct usb_device *udev, char *id, char *string)
|
|
{
|
|
if (!string)
|
|
return;
|
|
dev_info(&udev->dev, "%s: %s\n", id, string);
|
|
}
|
|
|
|
static void announce_device(struct usb_device *udev)
|
|
{
|
|
u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
|
|
|
|
dev_info(&udev->dev,
|
|
"New USB device found, idVendor=%04x, idProduct=%04x, bcdDevice=%2x.%02x\n",
|
|
le16_to_cpu(udev->descriptor.idVendor),
|
|
le16_to_cpu(udev->descriptor.idProduct),
|
|
bcdDevice >> 8, bcdDevice & 0xff);
|
|
dev_info(&udev->dev,
|
|
"New USB device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
|
|
udev->descriptor.iManufacturer,
|
|
udev->descriptor.iProduct,
|
|
udev->descriptor.iSerialNumber);
|
|
show_string(udev, "Product", udev->product);
|
|
show_string(udev, "Manufacturer", udev->manufacturer);
|
|
show_string(udev, "SerialNumber", udev->serial);
|
|
}
|
|
#else
|
|
static inline void announce_device(struct usb_device *udev) { }
|
|
#endif
|
|
|
|
|
|
/**
|
|
* usb_enumerate_device_otg - FIXME (usbcore-internal)
|
|
* @udev: newly addressed device (in ADDRESS state)
|
|
*
|
|
* Finish enumeration for On-The-Go devices
|
|
*
|
|
* Return: 0 if successful. A negative error code otherwise.
|
|
*/
|
|
static int usb_enumerate_device_otg(struct usb_device *udev)
|
|
{
|
|
int err = 0;
|
|
|
|
#ifdef CONFIG_USB_OTG
|
|
/*
|
|
* OTG-aware devices on OTG-capable root hubs may be able to use SRP,
|
|
* to wake us after we've powered off VBUS; and HNP, switching roles
|
|
* "host" to "peripheral". The OTG descriptor helps figure this out.
|
|
*/
|
|
if (!udev->bus->is_b_host
|
|
&& udev->config
|
|
&& udev->parent == udev->bus->root_hub) {
|
|
struct usb_otg_descriptor *desc = NULL;
|
|
struct usb_bus *bus = udev->bus;
|
|
unsigned port1 = udev->portnum;
|
|
|
|
/* descriptor may appear anywhere in config */
|
|
err = __usb_get_extra_descriptor(udev->rawdescriptors[0],
|
|
le16_to_cpu(udev->config[0].desc.wTotalLength),
|
|
USB_DT_OTG, (void **) &desc, sizeof(*desc));
|
|
if (err || !(desc->bmAttributes & USB_OTG_HNP))
|
|
return 0;
|
|
|
|
dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n",
|
|
(port1 == bus->otg_port) ? "" : "non-");
|
|
|
|
/* enable HNP before suspend, it's simpler */
|
|
if (port1 == bus->otg_port) {
|
|
bus->b_hnp_enable = 1;
|
|
err = usb_control_msg(udev,
|
|
usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_FEATURE, 0,
|
|
USB_DEVICE_B_HNP_ENABLE,
|
|
0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
if (err < 0) {
|
|
/*
|
|
* OTG MESSAGE: report errors here,
|
|
* customize to match your product.
|
|
*/
|
|
dev_err(&udev->dev, "can't set HNP mode: %d\n",
|
|
err);
|
|
bus->b_hnp_enable = 0;
|
|
}
|
|
} else if (desc->bLength == sizeof
|
|
(struct usb_otg_descriptor)) {
|
|
/* Set a_alt_hnp_support for legacy otg device */
|
|
err = usb_control_msg(udev,
|
|
usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_FEATURE, 0,
|
|
USB_DEVICE_A_ALT_HNP_SUPPORT,
|
|
0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
if (err < 0)
|
|
dev_err(&udev->dev,
|
|
"set a_alt_hnp_support failed: %d\n",
|
|
err);
|
|
}
|
|
}
|
|
#endif
|
|
return err;
|
|
}
|
|
|
|
|
|
/**
|
|
* usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
|
|
* @udev: newly addressed device (in ADDRESS state)
|
|
*
|
|
* This is only called by usb_new_device() and usb_authorize_device()
|
|
* and FIXME -- all comments that apply to them apply here wrt to
|
|
* environment.
|
|
*
|
|
* If the device is WUSB and not authorized, we don't attempt to read
|
|
* the string descriptors, as they will be errored out by the device
|
|
* until it has been authorized.
|
|
*
|
|
* Return: 0 if successful. A negative error code otherwise.
|
|
*/
|
|
static int usb_enumerate_device(struct usb_device *udev)
|
|
{
|
|
int err;
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
if (udev->config == NULL) {
|
|
err = usb_get_configuration(udev);
|
|
if (err < 0) {
|
|
if (err != -ENODEV)
|
|
dev_err(&udev->dev, "can't read configurations, error %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* read the standard strings and cache them if present */
|
|
udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
|
|
udev->manufacturer = usb_cache_string(udev,
|
|
udev->descriptor.iManufacturer);
|
|
udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
|
|
|
|
err = usb_enumerate_device_otg(udev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (IS_ENABLED(CONFIG_USB_OTG_WHITELIST) && hcd->tpl_support &&
|
|
!is_targeted(udev)) {
|
|
/* Maybe it can talk to us, though we can't talk to it.
|
|
* (Includes HNP test device.)
|
|
*/
|
|
if (IS_ENABLED(CONFIG_USB_OTG) && (udev->bus->b_hnp_enable
|
|
|| udev->bus->is_b_host)) {
|
|
err = usb_port_suspend(udev, PMSG_AUTO_SUSPEND);
|
|
if (err < 0)
|
|
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
|
|
}
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
usb_detect_interface_quirks(udev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_usb_port_removable(struct usb_device *udev)
|
|
{
|
|
struct usb_device *hdev = udev->parent;
|
|
struct usb_hub *hub;
|
|
u8 port = udev->portnum;
|
|
u16 wHubCharacteristics;
|
|
bool removable = true;
|
|
|
|
if (!hdev)
|
|
return;
|
|
|
|
hub = usb_hub_to_struct_hub(udev->parent);
|
|
|
|
/*
|
|
* If the platform firmware has provided information about a port,
|
|
* use that to determine whether it's removable.
|
|
*/
|
|
switch (hub->ports[udev->portnum - 1]->connect_type) {
|
|
case USB_PORT_CONNECT_TYPE_HOT_PLUG:
|
|
udev->removable = USB_DEVICE_REMOVABLE;
|
|
return;
|
|
case USB_PORT_CONNECT_TYPE_HARD_WIRED:
|
|
case USB_PORT_NOT_USED:
|
|
udev->removable = USB_DEVICE_FIXED;
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Otherwise, check whether the hub knows whether a port is removable
|
|
* or not
|
|
*/
|
|
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
|
|
|
|
if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
|
|
return;
|
|
|
|
if (hub_is_superspeed(hdev)) {
|
|
if (le16_to_cpu(hub->descriptor->u.ss.DeviceRemovable)
|
|
& (1 << port))
|
|
removable = false;
|
|
} else {
|
|
if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8)))
|
|
removable = false;
|
|
}
|
|
|
|
if (removable)
|
|
udev->removable = USB_DEVICE_REMOVABLE;
|
|
else
|
|
udev->removable = USB_DEVICE_FIXED;
|
|
|
|
}
|
|
|
|
/**
|
|
* usb_new_device - perform initial device setup (usbcore-internal)
|
|
* @udev: newly addressed device (in ADDRESS state)
|
|
*
|
|
* This is called with devices which have been detected but not fully
|
|
* enumerated. The device descriptor is available, but not descriptors
|
|
* for any device configuration. The caller must have locked either
|
|
* the parent hub (if udev is a normal device) or else the
|
|
* usb_bus_idr_lock (if udev is a root hub). The parent's pointer to
|
|
* udev has already been installed, but udev is not yet visible through
|
|
* sysfs or other filesystem code.
|
|
*
|
|
* This call is synchronous, and may not be used in an interrupt context.
|
|
*
|
|
* Only the hub driver or root-hub registrar should ever call this.
|
|
*
|
|
* Return: Whether the device is configured properly or not. Zero if the
|
|
* interface was registered with the driver core; else a negative errno
|
|
* value.
|
|
*
|
|
*/
|
|
int usb_new_device(struct usb_device *udev)
|
|
{
|
|
int err;
|
|
|
|
if (udev->parent) {
|
|
/* Initialize non-root-hub device wakeup to disabled;
|
|
* device (un)configuration controls wakeup capable
|
|
* sysfs power/wakeup controls wakeup enabled/disabled
|
|
*/
|
|
device_init_wakeup(&udev->dev, 0);
|
|
}
|
|
|
|
/* Tell the runtime-PM framework the device is active */
|
|
pm_runtime_set_active(&udev->dev);
|
|
pm_runtime_get_noresume(&udev->dev);
|
|
pm_runtime_use_autosuspend(&udev->dev);
|
|
pm_runtime_enable(&udev->dev);
|
|
|
|
/* By default, forbid autosuspend for all devices. It will be
|
|
* allowed for hubs during binding.
|
|
*/
|
|
usb_disable_autosuspend(udev);
|
|
|
|
err = usb_enumerate_device(udev); /* Read descriptors */
|
|
if (err < 0)
|
|
goto fail;
|
|
dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
|
|
udev->devnum, udev->bus->busnum,
|
|
(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
|
|
/* export the usbdev device-node for libusb */
|
|
udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
|
|
(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
|
|
|
|
/* Tell the world! */
|
|
announce_device(udev);
|
|
|
|
if (udev->serial)
|
|
add_device_randomness(udev->serial, strlen(udev->serial));
|
|
if (udev->product)
|
|
add_device_randomness(udev->product, strlen(udev->product));
|
|
if (udev->manufacturer)
|
|
add_device_randomness(udev->manufacturer,
|
|
strlen(udev->manufacturer));
|
|
|
|
device_enable_async_suspend(&udev->dev);
|
|
|
|
/* check whether the hub or firmware marks this port as non-removable */
|
|
if (udev->parent)
|
|
set_usb_port_removable(udev);
|
|
|
|
/* Register the device. The device driver is responsible
|
|
* for configuring the device and invoking the add-device
|
|
* notifier chain (used by usbfs and possibly others).
|
|
*/
|
|
err = device_add(&udev->dev);
|
|
if (err) {
|
|
dev_err(&udev->dev, "can't device_add, error %d\n", err);
|
|
goto fail;
|
|
}
|
|
|
|
/* Create link files between child device and usb port device. */
|
|
if (udev->parent) {
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
|
|
int port1 = udev->portnum;
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
|
|
err = sysfs_create_link(&udev->dev.kobj,
|
|
&port_dev->dev.kobj, "port");
|
|
if (err)
|
|
goto fail;
|
|
|
|
err = sysfs_create_link(&port_dev->dev.kobj,
|
|
&udev->dev.kobj, "device");
|
|
if (err) {
|
|
sysfs_remove_link(&udev->dev.kobj, "port");
|
|
goto fail;
|
|
}
|
|
|
|
if (!test_and_set_bit(port1, hub->child_usage_bits))
|
|
pm_runtime_get_sync(&port_dev->dev);
|
|
}
|
|
|
|
(void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev);
|
|
usb_mark_last_busy(udev);
|
|
pm_runtime_put_sync_autosuspend(&udev->dev);
|
|
return err;
|
|
|
|
fail:
|
|
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
|
|
pm_runtime_disable(&udev->dev);
|
|
pm_runtime_set_suspended(&udev->dev);
|
|
return err;
|
|
}
|
|
|
|
|
|
/**
|
|
* usb_deauthorize_device - deauthorize a device (usbcore-internal)
|
|
* @usb_dev: USB device
|
|
*
|
|
* Move the USB device to a very basic state where interfaces are disabled
|
|
* and the device is in fact unconfigured and unusable.
|
|
*
|
|
* We share a lock (that we have) with device_del(), so we need to
|
|
* defer its call.
|
|
*
|
|
* Return: 0.
|
|
*/
|
|
int usb_deauthorize_device(struct usb_device *usb_dev)
|
|
{
|
|
usb_lock_device(usb_dev);
|
|
if (usb_dev->authorized == 0)
|
|
goto out_unauthorized;
|
|
|
|
usb_dev->authorized = 0;
|
|
usb_set_configuration(usb_dev, -1);
|
|
|
|
out_unauthorized:
|
|
usb_unlock_device(usb_dev);
|
|
return 0;
|
|
}
|
|
|
|
|
|
int usb_authorize_device(struct usb_device *usb_dev)
|
|
{
|
|
int result = 0, c;
|
|
|
|
usb_lock_device(usb_dev);
|
|
if (usb_dev->authorized == 1)
|
|
goto out_authorized;
|
|
|
|
result = usb_autoresume_device(usb_dev);
|
|
if (result < 0) {
|
|
dev_err(&usb_dev->dev,
|
|
"can't autoresume for authorization: %d\n", result);
|
|
goto error_autoresume;
|
|
}
|
|
|
|
if (usb_dev->wusb) {
|
|
result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor));
|
|
if (result < 0) {
|
|
dev_err(&usb_dev->dev, "can't re-read device descriptor for "
|
|
"authorization: %d\n", result);
|
|
goto error_device_descriptor;
|
|
}
|
|
}
|
|
|
|
usb_dev->authorized = 1;
|
|
/* Choose and set the configuration. This registers the interfaces
|
|
* with the driver core and lets interface drivers bind to them.
|
|
*/
|
|
c = usb_choose_configuration(usb_dev);
|
|
if (c >= 0) {
|
|
result = usb_set_configuration(usb_dev, c);
|
|
if (result) {
|
|
dev_err(&usb_dev->dev,
|
|
"can't set config #%d, error %d\n", c, result);
|
|
/* This need not be fatal. The user can try to
|
|
* set other configurations. */
|
|
}
|
|
}
|
|
dev_info(&usb_dev->dev, "authorized to connect\n");
|
|
|
|
error_device_descriptor:
|
|
usb_autosuspend_device(usb_dev);
|
|
error_autoresume:
|
|
out_authorized:
|
|
usb_unlock_device(usb_dev); /* complements locktree */
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Return 1 if port speed is SuperSpeedPlus, 0 otherwise
|
|
* check it from the link protocol field of the current speed ID attribute.
|
|
* current speed ID is got from ext port status request. Sublink speed attribute
|
|
* table is returned with the hub BOS SSP device capability descriptor
|
|
*/
|
|
static int port_speed_is_ssp(struct usb_device *hdev, int speed_id)
|
|
{
|
|
int ssa_count;
|
|
u32 ss_attr;
|
|
int i;
|
|
struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap;
|
|
|
|
if (!ssp_cap)
|
|
return 0;
|
|
|
|
ssa_count = le32_to_cpu(ssp_cap->bmAttributes) &
|
|
USB_SSP_SUBLINK_SPEED_ATTRIBS;
|
|
|
|
for (i = 0; i <= ssa_count; i++) {
|
|
ss_attr = le32_to_cpu(ssp_cap->bmSublinkSpeedAttr[i]);
|
|
if (speed_id == (ss_attr & USB_SSP_SUBLINK_SPEED_SSID))
|
|
return !!(ss_attr & USB_SSP_SUBLINK_SPEED_LP);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
|
|
static unsigned hub_is_wusb(struct usb_hub *hub)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
if (hub->hdev->parent != NULL) /* not a root hub? */
|
|
return 0;
|
|
hcd = bus_to_hcd(hub->hdev->bus);
|
|
return hcd->wireless;
|
|
}
|
|
|
|
|
|
#define PORT_RESET_TRIES 5
|
|
#define SET_ADDRESS_TRIES 2
|
|
#define GET_DESCRIPTOR_TRIES 2
|
|
#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
|
|
#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)(scheme))
|
|
|
|
#define HUB_ROOT_RESET_TIME 60 /* times are in msec */
|
|
#define HUB_SHORT_RESET_TIME 10
|
|
#define HUB_BH_RESET_TIME 50
|
|
#define HUB_LONG_RESET_TIME 200
|
|
#define HUB_RESET_TIMEOUT 800
|
|
|
|
/*
|
|
* "New scheme" enumeration causes an extra state transition to be
|
|
* exposed to an xhci host and causes USB3 devices to receive control
|
|
* commands in the default state. This has been seen to cause
|
|
* enumeration failures, so disable this enumeration scheme for USB3
|
|
* devices.
|
|
*/
|
|
static bool use_new_scheme(struct usb_device *udev, int retry,
|
|
struct usb_port *port_dev)
|
|
{
|
|
int old_scheme_first_port =
|
|
port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
|
|
|
|
if (udev->speed >= USB_SPEED_SUPER)
|
|
return false;
|
|
|
|
return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
|
|
}
|
|
|
|
/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
|
|
* Port warm reset is required to recover
|
|
*/
|
|
static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
|
|
u16 portstatus)
|
|
{
|
|
u16 link_state;
|
|
|
|
if (!hub_is_superspeed(hub->hdev))
|
|
return false;
|
|
|
|
if (test_bit(port1, hub->warm_reset_bits))
|
|
return true;
|
|
|
|
link_state = portstatus & USB_PORT_STAT_LINK_STATE;
|
|
return link_state == USB_SS_PORT_LS_SS_INACTIVE
|
|
|| link_state == USB_SS_PORT_LS_COMP_MOD;
|
|
}
|
|
|
|
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
|
|
struct usb_device *udev, unsigned int delay, bool warm)
|
|
{
|
|
int delay_time, ret;
|
|
u16 portstatus;
|
|
u16 portchange;
|
|
u32 ext_portstatus = 0;
|
|
|
|
for (delay_time = 0;
|
|
delay_time < HUB_RESET_TIMEOUT;
|
|
delay_time += delay) {
|
|
/* wait to give the device a chance to reset */
|
|
msleep(delay);
|
|
|
|
/* read and decode port status */
|
|
if (hub_is_superspeedplus(hub->hdev))
|
|
ret = hub_ext_port_status(hub, port1,
|
|
HUB_EXT_PORT_STATUS,
|
|
&portstatus, &portchange,
|
|
&ext_portstatus);
|
|
else
|
|
ret = hub_port_status(hub, port1, &portstatus,
|
|
&portchange);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The port state is unknown until the reset completes.
|
|
*
|
|
* On top of that, some chips may require additional time
|
|
* to re-establish a connection after the reset is complete,
|
|
* so also wait for the connection to be re-established.
|
|
*/
|
|
if (!(portstatus & USB_PORT_STAT_RESET) &&
|
|
(portstatus & USB_PORT_STAT_CONNECTION))
|
|
break;
|
|
|
|
/* switch to the long delay after two short delay failures */
|
|
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
|
|
delay = HUB_LONG_RESET_TIME;
|
|
|
|
dev_dbg(&hub->ports[port1 - 1]->dev,
|
|
"not %sreset yet, waiting %dms\n",
|
|
warm ? "warm " : "", delay);
|
|
}
|
|
|
|
if ((portstatus & USB_PORT_STAT_RESET))
|
|
return -EBUSY;
|
|
|
|
if (hub_port_warm_reset_required(hub, port1, portstatus))
|
|
return -ENOTCONN;
|
|
|
|
/* Device went away? */
|
|
if (!(portstatus & USB_PORT_STAT_CONNECTION))
|
|
return -ENOTCONN;
|
|
|
|
/* Retry if connect change is set but status is still connected.
|
|
* A USB 3.0 connection may bounce if multiple warm resets were issued,
|
|
* but the device may have successfully re-connected. Ignore it.
|
|
*/
|
|
if (!hub_is_superspeed(hub->hdev) &&
|
|
(portchange & USB_PORT_STAT_C_CONNECTION)) {
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_CONNECTION);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (!(portstatus & USB_PORT_STAT_ENABLE))
|
|
return -EBUSY;
|
|
|
|
if (!udev)
|
|
return 0;
|
|
|
|
if (hub_is_superspeedplus(hub->hdev)) {
|
|
/* extended portstatus Rx and Tx lane count are zero based */
|
|
udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1;
|
|
udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1;
|
|
} else {
|
|
udev->rx_lanes = 1;
|
|
udev->tx_lanes = 1;
|
|
}
|
|
if (hub_is_wusb(hub))
|
|
udev->speed = USB_SPEED_WIRELESS;
|
|
else if (hub_is_superspeedplus(hub->hdev) &&
|
|
port_speed_is_ssp(hub->hdev, ext_portstatus &
|
|
USB_EXT_PORT_STAT_RX_SPEED_ID))
|
|
udev->speed = USB_SPEED_SUPER_PLUS;
|
|
else if (hub_is_superspeed(hub->hdev))
|
|
udev->speed = USB_SPEED_SUPER;
|
|
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
|
|
udev->speed = USB_SPEED_HIGH;
|
|
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
|
|
udev->speed = USB_SPEED_LOW;
|
|
else
|
|
udev->speed = USB_SPEED_FULL;
|
|
return 0;
|
|
}
|
|
|
|
/* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
|
|
static int hub_port_reset(struct usb_hub *hub, int port1,
|
|
struct usb_device *udev, unsigned int delay, bool warm)
|
|
{
|
|
int i, status;
|
|
u16 portchange, portstatus;
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
int reset_recovery_time;
|
|
|
|
if (!hub_is_superspeed(hub->hdev)) {
|
|
if (warm) {
|
|
dev_err(hub->intfdev, "only USB3 hub support "
|
|
"warm reset\n");
|
|
return -EINVAL;
|
|
}
|
|
/* Block EHCI CF initialization during the port reset.
|
|
* Some companion controllers don't like it when they mix.
|
|
*/
|
|
down_read(&ehci_cf_port_reset_rwsem);
|
|
} else if (!warm) {
|
|
/*
|
|
* If the caller hasn't explicitly requested a warm reset,
|
|
* double check and see if one is needed.
|
|
*/
|
|
if (hub_port_status(hub, port1, &portstatus, &portchange) == 0)
|
|
if (hub_port_warm_reset_required(hub, port1,
|
|
portstatus))
|
|
warm = true;
|
|
}
|
|
clear_bit(port1, hub->warm_reset_bits);
|
|
|
|
/* Reset the port */
|
|
for (i = 0; i < PORT_RESET_TRIES; i++) {
|
|
status = set_port_feature(hub->hdev, port1, (warm ?
|
|
USB_PORT_FEAT_BH_PORT_RESET :
|
|
USB_PORT_FEAT_RESET));
|
|
if (status == -ENODEV) {
|
|
; /* The hub is gone */
|
|
} else if (status) {
|
|
dev_err(&port_dev->dev,
|
|
"cannot %sreset (err = %d)\n",
|
|
warm ? "warm " : "", status);
|
|
} else {
|
|
status = hub_port_wait_reset(hub, port1, udev, delay,
|
|
warm);
|
|
if (status && status != -ENOTCONN && status != -ENODEV)
|
|
dev_dbg(hub->intfdev,
|
|
"port_wait_reset: err = %d\n",
|
|
status);
|
|
}
|
|
|
|
/* Check for disconnect or reset */
|
|
if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_RESET);
|
|
|
|
if (!hub_is_superspeed(hub->hdev))
|
|
goto done;
|
|
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_BH_PORT_RESET);
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_PORT_LINK_STATE);
|
|
|
|
if (udev)
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_CONNECTION);
|
|
|
|
/*
|
|
* If a USB 3.0 device migrates from reset to an error
|
|
* state, re-issue the warm reset.
|
|
*/
|
|
if (hub_port_status(hub, port1,
|
|
&portstatus, &portchange) < 0)
|
|
goto done;
|
|
|
|
if (!hub_port_warm_reset_required(hub, port1,
|
|
portstatus))
|
|
goto done;
|
|
|
|
/*
|
|
* If the port is in SS.Inactive or Compliance Mode, the
|
|
* hot or warm reset failed. Try another warm reset.
|
|
*/
|
|
if (!warm) {
|
|
dev_dbg(&port_dev->dev,
|
|
"hot reset failed, warm reset\n");
|
|
warm = true;
|
|
}
|
|
}
|
|
|
|
dev_dbg(&port_dev->dev,
|
|
"not enabled, trying %sreset again...\n",
|
|
warm ? "warm " : "");
|
|
delay = HUB_LONG_RESET_TIME;
|
|
}
|
|
|
|
dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
|
|
|
|
done:
|
|
if (status == 0) {
|
|
if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM)
|
|
usleep_range(10000, 12000);
|
|
else {
|
|
/* TRSTRCY = 10 ms; plus some extra */
|
|
reset_recovery_time = 10 + 40;
|
|
|
|
/* Hub needs extra delay after resetting its port. */
|
|
if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET)
|
|
reset_recovery_time += 100;
|
|
|
|
msleep(reset_recovery_time);
|
|
}
|
|
|
|
if (udev) {
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
update_devnum(udev, 0);
|
|
/* The xHC may think the device is already reset,
|
|
* so ignore the status.
|
|
*/
|
|
if (hcd->driver->reset_device)
|
|
hcd->driver->reset_device(hcd, udev);
|
|
|
|
usb_set_device_state(udev, USB_STATE_DEFAULT);
|
|
}
|
|
} else {
|
|
if (udev)
|
|
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
|
|
}
|
|
|
|
if (!hub_is_superspeed(hub->hdev))
|
|
up_read(&ehci_cf_port_reset_rwsem);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* Check if a port is power on */
|
|
static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (hub_is_superspeed(hub->hdev)) {
|
|
if (portstatus & USB_SS_PORT_STAT_POWER)
|
|
ret = 1;
|
|
} else {
|
|
if (portstatus & USB_PORT_STAT_POWER)
|
|
ret = 1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void usb_lock_port(struct usb_port *port_dev)
|
|
__acquires(&port_dev->status_lock)
|
|
{
|
|
mutex_lock(&port_dev->status_lock);
|
|
__acquire(&port_dev->status_lock);
|
|
}
|
|
|
|
static void usb_unlock_port(struct usb_port *port_dev)
|
|
__releases(&port_dev->status_lock)
|
|
{
|
|
mutex_unlock(&port_dev->status_lock);
|
|
__release(&port_dev->status_lock);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
|
|
static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (hub_is_superspeed(hub->hdev)) {
|
|
if ((portstatus & USB_PORT_STAT_LINK_STATE)
|
|
== USB_SS_PORT_LS_U3)
|
|
ret = 1;
|
|
} else {
|
|
if (portstatus & USB_PORT_STAT_SUSPEND)
|
|
ret = 1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Determine whether the device on a port is ready for a normal resume,
|
|
* is ready for a reset-resume, or should be disconnected.
|
|
*/
|
|
static int check_port_resume_type(struct usb_device *udev,
|
|
struct usb_hub *hub, int port1,
|
|
int status, u16 portchange, u16 portstatus)
|
|
{
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
int retries = 3;
|
|
|
|
retry:
|
|
/* Is a warm reset needed to recover the connection? */
|
|
if (status == 0 && udev->reset_resume
|
|
&& hub_port_warm_reset_required(hub, port1, portstatus)) {
|
|
/* pass */;
|
|
}
|
|
/* Is the device still present? */
|
|
else if (status || port_is_suspended(hub, portstatus) ||
|
|
!port_is_power_on(hub, portstatus)) {
|
|
if (status >= 0)
|
|
status = -ENODEV;
|
|
} else if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
|
|
if (retries--) {
|
|
usleep_range(200, 300);
|
|
status = hub_port_status(hub, port1, &portstatus,
|
|
&portchange);
|
|
goto retry;
|
|
}
|
|
status = -ENODEV;
|
|
}
|
|
|
|
/* Can't do a normal resume if the port isn't enabled,
|
|
* so try a reset-resume instead.
|
|
*/
|
|
else if (!(portstatus & USB_PORT_STAT_ENABLE) && !udev->reset_resume) {
|
|
if (udev->persist_enabled)
|
|
udev->reset_resume = 1;
|
|
else
|
|
status = -ENODEV;
|
|
}
|
|
|
|
if (status) {
|
|
dev_dbg(&port_dev->dev, "status %04x.%04x after resume, %d\n",
|
|
portchange, portstatus, status);
|
|
} else if (udev->reset_resume) {
|
|
|
|
/* Late port handoff can set status-change bits */
|
|
if (portchange & USB_PORT_STAT_C_CONNECTION)
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_CONNECTION);
|
|
if (portchange & USB_PORT_STAT_C_ENABLE)
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_ENABLE);
|
|
|
|
/*
|
|
* Whatever made this reset-resume necessary may have
|
|
* turned on the port1 bit in hub->change_bits. But after
|
|
* a successful reset-resume we want the bit to be clear;
|
|
* if it was on it would indicate that something happened
|
|
* following the reset-resume.
|
|
*/
|
|
clear_bit(port1, hub->change_bits);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int usb_disable_ltm(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
/* Check if the roothub and device supports LTM. */
|
|
if (!usb_device_supports_ltm(hcd->self.root_hub) ||
|
|
!usb_device_supports_ltm(udev))
|
|
return 0;
|
|
|
|
/* Clear Feature LTM Enable can only be sent if the device is
|
|
* configured.
|
|
*/
|
|
if (!udev->actconfig)
|
|
return 0;
|
|
|
|
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
|
|
USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_disable_ltm);
|
|
|
|
void usb_enable_ltm(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
/* Check if the roothub and device supports LTM. */
|
|
if (!usb_device_supports_ltm(hcd->self.root_hub) ||
|
|
!usb_device_supports_ltm(udev))
|
|
return;
|
|
|
|
/* Set Feature LTM Enable can only be sent if the device is
|
|
* configured.
|
|
*/
|
|
if (!udev->actconfig)
|
|
return;
|
|
|
|
usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
|
|
USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_enable_ltm);
|
|
|
|
/*
|
|
* usb_enable_remote_wakeup - enable remote wakeup for a device
|
|
* @udev: target device
|
|
*
|
|
* For USB-2 devices: Set the device's remote wakeup feature.
|
|
*
|
|
* For USB-3 devices: Assume there's only one function on the device and
|
|
* enable remote wake for the first interface. FIXME if the interface
|
|
* association descriptor shows there's more than one function.
|
|
*/
|
|
static int usb_enable_remote_wakeup(struct usb_device *udev)
|
|
{
|
|
if (udev->speed < USB_SPEED_SUPER)
|
|
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
|
|
USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
else
|
|
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
|
|
USB_INTRF_FUNC_SUSPEND,
|
|
USB_INTRF_FUNC_SUSPEND_RW |
|
|
USB_INTRF_FUNC_SUSPEND_LP,
|
|
NULL, 0, USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
|
|
/*
|
|
* usb_disable_remote_wakeup - disable remote wakeup for a device
|
|
* @udev: target device
|
|
*
|
|
* For USB-2 devices: Clear the device's remote wakeup feature.
|
|
*
|
|
* For USB-3 devices: Assume there's only one function on the device and
|
|
* disable remote wake for the first interface. FIXME if the interface
|
|
* association descriptor shows there's more than one function.
|
|
*/
|
|
static int usb_disable_remote_wakeup(struct usb_device *udev)
|
|
{
|
|
if (udev->speed < USB_SPEED_SUPER)
|
|
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
|
|
USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
else
|
|
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
|
|
USB_INTRF_FUNC_SUSPEND, 0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
|
|
/* Count of wakeup-enabled devices at or below udev */
|
|
unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev);
|
|
|
|
return udev->do_remote_wakeup +
|
|
(hub ? hub->wakeup_enabled_descendants : 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_wakeup_enabled_descendants);
|
|
|
|
/*
|
|
* usb_port_suspend - suspend a usb device's upstream port
|
|
* @udev: device that's no longer in active use, not a root hub
|
|
* Context: must be able to sleep; device not locked; pm locks held
|
|
*
|
|
* Suspends a USB device that isn't in active use, conserving power.
|
|
* Devices may wake out of a suspend, if anything important happens,
|
|
* using the remote wakeup mechanism. They may also be taken out of
|
|
* suspend by the host, using usb_port_resume(). It's also routine
|
|
* to disconnect devices while they are suspended.
|
|
*
|
|
* This only affects the USB hardware for a device; its interfaces
|
|
* (and, for hubs, child devices) must already have been suspended.
|
|
*
|
|
* Selective port suspend reduces power; most suspended devices draw
|
|
* less than 500 uA. It's also used in OTG, along with remote wakeup.
|
|
* All devices below the suspended port are also suspended.
|
|
*
|
|
* Devices leave suspend state when the host wakes them up. Some devices
|
|
* also support "remote wakeup", where the device can activate the USB
|
|
* tree above them to deliver data, such as a keypress or packet. In
|
|
* some cases, this wakes the USB host.
|
|
*
|
|
* Suspending OTG devices may trigger HNP, if that's been enabled
|
|
* between a pair of dual-role devices. That will change roles, such
|
|
* as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
|
|
*
|
|
* Devices on USB hub ports have only one "suspend" state, corresponding
|
|
* to ACPI D2, "may cause the device to lose some context".
|
|
* State transitions include:
|
|
*
|
|
* - suspend, resume ... when the VBUS power link stays live
|
|
* - suspend, disconnect ... VBUS lost
|
|
*
|
|
* Once VBUS drop breaks the circuit, the port it's using has to go through
|
|
* normal re-enumeration procedures, starting with enabling VBUS power.
|
|
* Other than re-initializing the hub (plug/unplug, except for root hubs),
|
|
* Linux (2.6) currently has NO mechanisms to initiate that: no hub_wq
|
|
* timer, no SRP, no requests through sysfs.
|
|
*
|
|
* If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
|
|
* suspended until their bus goes into global suspend (i.e., the root
|
|
* hub is suspended). Nevertheless, we change @udev->state to
|
|
* USB_STATE_SUSPENDED as this is the device's "logical" state. The actual
|
|
* upstream port setting is stored in @udev->port_is_suspended.
|
|
*
|
|
* Returns 0 on success, else negative errno.
|
|
*/
|
|
int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
|
|
struct usb_port *port_dev = hub->ports[udev->portnum - 1];
|
|
int port1 = udev->portnum;
|
|
int status;
|
|
bool really_suspend = true;
|
|
|
|
usb_lock_port(port_dev);
|
|
|
|
/* enable remote wakeup when appropriate; this lets the device
|
|
* wake up the upstream hub (including maybe the root hub).
|
|
*
|
|
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
|
|
* we don't explicitly enable it here.
|
|
*/
|
|
if (udev->do_remote_wakeup) {
|
|
status = usb_enable_remote_wakeup(udev);
|
|
if (status) {
|
|
dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
|
|
status);
|
|
/* bail if autosuspend is requested */
|
|
if (PMSG_IS_AUTO(msg))
|
|
goto err_wakeup;
|
|
}
|
|
}
|
|
|
|
/* disable USB2 hardware LPM */
|
|
usb_disable_usb2_hardware_lpm(udev);
|
|
|
|
if (usb_disable_ltm(udev)) {
|
|
dev_err(&udev->dev, "Failed to disable LTM before suspend\n");
|
|
status = -ENOMEM;
|
|
if (PMSG_IS_AUTO(msg))
|
|
goto err_ltm;
|
|
}
|
|
|
|
/* see 7.1.7.6 */
|
|
if (hub_is_superspeed(hub->hdev))
|
|
status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
|
|
|
|
/*
|
|
* For system suspend, we do not need to enable the suspend feature
|
|
* on individual USB-2 ports. The devices will automatically go
|
|
* into suspend a few ms after the root hub stops sending packets.
|
|
* The USB 2.0 spec calls this "global suspend".
|
|
*
|
|
* However, many USB hubs have a bug: They don't relay wakeup requests
|
|
* from a downstream port if the port's suspend feature isn't on.
|
|
* Therefore we will turn on the suspend feature if udev or any of its
|
|
* descendants is enabled for remote wakeup.
|
|
*/
|
|
else if (PMSG_IS_AUTO(msg) || usb_wakeup_enabled_descendants(udev) > 0)
|
|
status = set_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_SUSPEND);
|
|
else {
|
|
really_suspend = false;
|
|
status = 0;
|
|
}
|
|
if (status) {
|
|
dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status);
|
|
|
|
/* Try to enable USB3 LTM again */
|
|
usb_enable_ltm(udev);
|
|
err_ltm:
|
|
/* Try to enable USB2 hardware LPM again */
|
|
usb_enable_usb2_hardware_lpm(udev);
|
|
|
|
if (udev->do_remote_wakeup)
|
|
(void) usb_disable_remote_wakeup(udev);
|
|
err_wakeup:
|
|
|
|
/* System sleep transitions should never fail */
|
|
if (!PMSG_IS_AUTO(msg))
|
|
status = 0;
|
|
} else {
|
|
dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n",
|
|
(PMSG_IS_AUTO(msg) ? "auto-" : ""),
|
|
udev->do_remote_wakeup);
|
|
if (really_suspend) {
|
|
udev->port_is_suspended = 1;
|
|
|
|
/* device has up to 10 msec to fully suspend */
|
|
msleep(10);
|
|
}
|
|
usb_set_device_state(udev, USB_STATE_SUSPENDED);
|
|
}
|
|
|
|
if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled
|
|
&& test_and_clear_bit(port1, hub->child_usage_bits))
|
|
pm_runtime_put_sync(&port_dev->dev);
|
|
|
|
usb_mark_last_busy(hub->hdev);
|
|
|
|
usb_unlock_port(port_dev);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* If the USB "suspend" state is in use (rather than "global suspend"),
|
|
* many devices will be individually taken out of suspend state using
|
|
* special "resume" signaling. This routine kicks in shortly after
|
|
* hardware resume signaling is finished, either because of selective
|
|
* resume (by host) or remote wakeup (by device) ... now see what changed
|
|
* in the tree that's rooted at this device.
|
|
*
|
|
* If @udev->reset_resume is set then the device is reset before the
|
|
* status check is done.
|
|
*/
|
|
static int finish_port_resume(struct usb_device *udev)
|
|
{
|
|
int status = 0;
|
|
u16 devstatus = 0;
|
|
|
|
/* caller owns the udev device lock */
|
|
dev_dbg(&udev->dev, "%s\n",
|
|
udev->reset_resume ? "finish reset-resume" : "finish resume");
|
|
|
|
/* usb ch9 identifies four variants of SUSPENDED, based on what
|
|
* state the device resumes to. Linux currently won't see the
|
|
* first two on the host side; they'd be inside hub_port_init()
|
|
* during many timeouts, but hub_wq can't suspend until later.
|
|
*/
|
|
usb_set_device_state(udev, udev->actconfig
|
|
? USB_STATE_CONFIGURED
|
|
: USB_STATE_ADDRESS);
|
|
|
|
/* 10.5.4.5 says not to reset a suspended port if the attached
|
|
* device is enabled for remote wakeup. Hence the reset
|
|
* operation is carried out here, after the port has been
|
|
* resumed.
|
|
*/
|
|
if (udev->reset_resume) {
|
|
/*
|
|
* If the device morphs or switches modes when it is reset,
|
|
* we don't want to perform a reset-resume. We'll fail the
|
|
* resume, which will cause a logical disconnect, and then
|
|
* the device will be rediscovered.
|
|
*/
|
|
retry_reset_resume:
|
|
if (udev->quirks & USB_QUIRK_RESET)
|
|
status = -ENODEV;
|
|
else
|
|
status = usb_reset_and_verify_device(udev);
|
|
}
|
|
|
|
/* 10.5.4.5 says be sure devices in the tree are still there.
|
|
* For now let's assume the device didn't go crazy on resume,
|
|
* and device drivers will know about any resume quirks.
|
|
*/
|
|
if (status == 0) {
|
|
devstatus = 0;
|
|
status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
|
|
|
|
/* If a normal resume failed, try doing a reset-resume */
|
|
if (status && !udev->reset_resume && udev->persist_enabled) {
|
|
dev_dbg(&udev->dev, "retry with reset-resume\n");
|
|
udev->reset_resume = 1;
|
|
goto retry_reset_resume;
|
|
}
|
|
}
|
|
|
|
if (status) {
|
|
dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
|
|
status);
|
|
/*
|
|
* There are a few quirky devices which violate the standard
|
|
* by claiming to have remote wakeup enabled after a reset,
|
|
* which crash if the feature is cleared, hence check for
|
|
* udev->reset_resume
|
|
*/
|
|
} else if (udev->actconfig && !udev->reset_resume) {
|
|
if (udev->speed < USB_SPEED_SUPER) {
|
|
if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
|
|
status = usb_disable_remote_wakeup(udev);
|
|
} else {
|
|
status = usb_get_std_status(udev, USB_RECIP_INTERFACE, 0,
|
|
&devstatus);
|
|
if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
|
|
| USB_INTRF_STAT_FUNC_RW))
|
|
status = usb_disable_remote_wakeup(udev);
|
|
}
|
|
|
|
if (status)
|
|
dev_dbg(&udev->dev,
|
|
"disable remote wakeup, status %d\n",
|
|
status);
|
|
status = 0;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* There are some SS USB devices which take longer time for link training.
|
|
* XHCI specs 4.19.4 says that when Link training is successful, port
|
|
* sets CCS bit to 1. So if SW reads port status before successful link
|
|
* training, then it will not find device to be present.
|
|
* USB Analyzer log with such buggy devices show that in some cases
|
|
* device switch on the RX termination after long delay of host enabling
|
|
* the VBUS. In few other cases it has been seen that device fails to
|
|
* negotiate link training in first attempt. It has been
|
|
* reported till now that few devices take as long as 2000 ms to train
|
|
* the link after host enabling its VBUS and termination. Following
|
|
* routine implements a 2000 ms timeout for link training. If in a case
|
|
* link trains before timeout, loop will exit earlier.
|
|
*
|
|
* There are also some 2.0 hard drive based devices and 3.0 thumb
|
|
* drives that, when plugged into a 2.0 only port, take a long
|
|
* time to set CCS after VBUS enable.
|
|
*
|
|
* FIXME: If a device was connected before suspend, but was removed
|
|
* while system was asleep, then the loop in the following routine will
|
|
* only exit at timeout.
|
|
*
|
|
* This routine should only be called when persist is enabled.
|
|
*/
|
|
static int wait_for_connected(struct usb_device *udev,
|
|
struct usb_hub *hub, int *port1,
|
|
u16 *portchange, u16 *portstatus)
|
|
{
|
|
int status = 0, delay_ms = 0;
|
|
|
|
while (delay_ms < 2000) {
|
|
if (status || *portstatus & USB_PORT_STAT_CONNECTION)
|
|
break;
|
|
if (!port_is_power_on(hub, *portstatus)) {
|
|
status = -ENODEV;
|
|
break;
|
|
}
|
|
msleep(20);
|
|
delay_ms += 20;
|
|
status = hub_port_status(hub, *port1, portstatus, portchange);
|
|
}
|
|
dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* usb_port_resume - re-activate a suspended usb device's upstream port
|
|
* @udev: device to re-activate, not a root hub
|
|
* Context: must be able to sleep; device not locked; pm locks held
|
|
*
|
|
* This will re-activate the suspended device, increasing power usage
|
|
* while letting drivers communicate again with its endpoints.
|
|
* USB resume explicitly guarantees that the power session between
|
|
* the host and the device is the same as it was when the device
|
|
* suspended.
|
|
*
|
|
* If @udev->reset_resume is set then this routine won't check that the
|
|
* port is still enabled. Furthermore, finish_port_resume() above will
|
|
* reset @udev. The end result is that a broken power session can be
|
|
* recovered and @udev will appear to persist across a loss of VBUS power.
|
|
*
|
|
* For example, if a host controller doesn't maintain VBUS suspend current
|
|
* during a system sleep or is reset when the system wakes up, all the USB
|
|
* power sessions below it will be broken. This is especially troublesome
|
|
* for mass-storage devices containing mounted filesystems, since the
|
|
* device will appear to have disconnected and all the memory mappings
|
|
* to it will be lost. Using the USB_PERSIST facility, the device can be
|
|
* made to appear as if it had not disconnected.
|
|
*
|
|
* This facility can be dangerous. Although usb_reset_and_verify_device() makes
|
|
* every effort to insure that the same device is present after the
|
|
* reset as before, it cannot provide a 100% guarantee. Furthermore it's
|
|
* quite possible for a device to remain unaltered but its media to be
|
|
* changed. If the user replaces a flash memory card while the system is
|
|
* asleep, he will have only himself to blame when the filesystem on the
|
|
* new card is corrupted and the system crashes.
|
|
*
|
|
* Returns 0 on success, else negative errno.
|
|
*/
|
|
int usb_port_resume(struct usb_device *udev, pm_message_t msg)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
|
|
struct usb_port *port_dev = hub->ports[udev->portnum - 1];
|
|
int port1 = udev->portnum;
|
|
int status;
|
|
u16 portchange, portstatus;
|
|
|
|
if (!test_and_set_bit(port1, hub->child_usage_bits)) {
|
|
status = pm_runtime_get_sync(&port_dev->dev);
|
|
if (status < 0) {
|
|
dev_dbg(&udev->dev, "can't resume usb port, status %d\n",
|
|
status);
|
|
return status;
|
|
}
|
|
}
|
|
|
|
usb_lock_port(port_dev);
|
|
|
|
/* Skip the initial Clear-Suspend step for a remote wakeup */
|
|
status = hub_port_status(hub, port1, &portstatus, &portchange);
|
|
if (status == 0 && !port_is_suspended(hub, portstatus)) {
|
|
if (portchange & USB_PORT_STAT_C_SUSPEND)
|
|
pm_wakeup_event(&udev->dev, 0);
|
|
goto SuspendCleared;
|
|
}
|
|
|
|
/* see 7.1.7.7; affects power usage, but not budgeting */
|
|
if (hub_is_superspeed(hub->hdev))
|
|
status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0);
|
|
else
|
|
status = usb_clear_port_feature(hub->hdev,
|
|
port1, USB_PORT_FEAT_SUSPEND);
|
|
if (status) {
|
|
dev_dbg(&port_dev->dev, "can't resume, status %d\n", status);
|
|
} else {
|
|
/* drive resume for USB_RESUME_TIMEOUT msec */
|
|
dev_dbg(&udev->dev, "usb %sresume\n",
|
|
(PMSG_IS_AUTO(msg) ? "auto-" : ""));
|
|
msleep(USB_RESUME_TIMEOUT);
|
|
|
|
/* Virtual root hubs can trigger on GET_PORT_STATUS to
|
|
* stop resume signaling. Then finish the resume
|
|
* sequence.
|
|
*/
|
|
status = hub_port_status(hub, port1, &portstatus, &portchange);
|
|
|
|
/* TRSMRCY = 10 msec */
|
|
msleep(10);
|
|
}
|
|
|
|
SuspendCleared:
|
|
if (status == 0) {
|
|
udev->port_is_suspended = 0;
|
|
if (hub_is_superspeed(hub->hdev)) {
|
|
if (portchange & USB_PORT_STAT_C_LINK_STATE)
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_PORT_LINK_STATE);
|
|
} else {
|
|
if (portchange & USB_PORT_STAT_C_SUSPEND)
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_SUSPEND);
|
|
}
|
|
}
|
|
|
|
if (udev->persist_enabled)
|
|
status = wait_for_connected(udev, hub, &port1, &portchange,
|
|
&portstatus);
|
|
|
|
status = check_port_resume_type(udev,
|
|
hub, port1, status, portchange, portstatus);
|
|
if (status == 0)
|
|
status = finish_port_resume(udev);
|
|
if (status < 0) {
|
|
dev_dbg(&udev->dev, "can't resume, status %d\n", status);
|
|
hub_port_logical_disconnect(hub, port1);
|
|
} else {
|
|
/* Try to enable USB2 hardware LPM */
|
|
usb_enable_usb2_hardware_lpm(udev);
|
|
|
|
/* Try to enable USB3 LTM */
|
|
usb_enable_ltm(udev);
|
|
}
|
|
|
|
usb_unlock_port(port_dev);
|
|
|
|
return status;
|
|
}
|
|
|
|
int usb_remote_wakeup(struct usb_device *udev)
|
|
{
|
|
int status = 0;
|
|
|
|
usb_lock_device(udev);
|
|
if (udev->state == USB_STATE_SUSPENDED) {
|
|
dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
|
|
status = usb_autoresume_device(udev);
|
|
if (status == 0) {
|
|
/* Let the drivers do their thing, then... */
|
|
usb_autosuspend_device(udev);
|
|
}
|
|
}
|
|
usb_unlock_device(udev);
|
|
return status;
|
|
}
|
|
|
|
/* Returns 1 if there was a remote wakeup and a connect status change. */
|
|
static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
|
|
u16 portstatus, u16 portchange)
|
|
__must_hold(&port_dev->status_lock)
|
|
{
|
|
struct usb_port *port_dev = hub->ports[port - 1];
|
|
struct usb_device *hdev;
|
|
struct usb_device *udev;
|
|
int connect_change = 0;
|
|
u16 link_state;
|
|
int ret;
|
|
|
|
hdev = hub->hdev;
|
|
udev = port_dev->child;
|
|
if (!hub_is_superspeed(hdev)) {
|
|
if (!(portchange & USB_PORT_STAT_C_SUSPEND))
|
|
return 0;
|
|
usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
|
|
} else {
|
|
link_state = portstatus & USB_PORT_STAT_LINK_STATE;
|
|
if (!udev || udev->state != USB_STATE_SUSPENDED ||
|
|
(link_state != USB_SS_PORT_LS_U0 &&
|
|
link_state != USB_SS_PORT_LS_U1 &&
|
|
link_state != USB_SS_PORT_LS_U2))
|
|
return 0;
|
|
}
|
|
|
|
if (udev) {
|
|
/* TRSMRCY = 10 msec */
|
|
msleep(10);
|
|
|
|
usb_unlock_port(port_dev);
|
|
ret = usb_remote_wakeup(udev);
|
|
usb_lock_port(port_dev);
|
|
if (ret < 0)
|
|
connect_change = 1;
|
|
} else {
|
|
ret = -ENODEV;
|
|
hub_port_disable(hub, port, 1);
|
|
}
|
|
dev_dbg(&port_dev->dev, "resume, status %d\n", ret);
|
|
return connect_change;
|
|
}
|
|
|
|
static int check_ports_changed(struct usb_hub *hub)
|
|
{
|
|
int port1;
|
|
|
|
for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) {
|
|
u16 portstatus, portchange;
|
|
int status;
|
|
|
|
status = hub_port_status(hub, port1, &portstatus, &portchange);
|
|
if (!status && portchange)
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
|
|
{
|
|
struct usb_hub *hub = usb_get_intfdata(intf);
|
|
struct usb_device *hdev = hub->hdev;
|
|
unsigned port1;
|
|
|
|
/*
|
|
* Warn if children aren't already suspended.
|
|
* Also, add up the number of wakeup-enabled descendants.
|
|
*/
|
|
hub->wakeup_enabled_descendants = 0;
|
|
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
struct usb_device *udev = port_dev->child;
|
|
|
|
if (udev && udev->can_submit) {
|
|
dev_warn(&port_dev->dev, "device %s not suspended yet\n",
|
|
dev_name(&udev->dev));
|
|
if (PMSG_IS_AUTO(msg))
|
|
return -EBUSY;
|
|
}
|
|
if (udev)
|
|
hub->wakeup_enabled_descendants +=
|
|
usb_wakeup_enabled_descendants(udev);
|
|
}
|
|
|
|
if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
|
|
/* check if there are changes pending on hub ports */
|
|
if (check_ports_changed(hub)) {
|
|
if (PMSG_IS_AUTO(msg))
|
|
return -EBUSY;
|
|
pm_wakeup_event(&hdev->dev, 2000);
|
|
}
|
|
}
|
|
|
|
if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
|
|
/* Enable hub to send remote wakeup for all ports. */
|
|
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
|
|
set_port_feature(hdev,
|
|
port1 |
|
|
USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
|
|
USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
|
|
USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT,
|
|
USB_PORT_FEAT_REMOTE_WAKE_MASK);
|
|
}
|
|
}
|
|
|
|
dev_dbg(&intf->dev, "%s\n", __func__);
|
|
|
|
/* stop hub_wq and related activity */
|
|
hub_quiesce(hub, HUB_SUSPEND);
|
|
return 0;
|
|
}
|
|
|
|
/* Report wakeup requests from the ports of a resuming root hub */
|
|
static void report_wakeup_requests(struct usb_hub *hub)
|
|
{
|
|
struct usb_device *hdev = hub->hdev;
|
|
struct usb_device *udev;
|
|
struct usb_hcd *hcd;
|
|
unsigned long resuming_ports;
|
|
int i;
|
|
|
|
if (hdev->parent)
|
|
return; /* Not a root hub */
|
|
|
|
hcd = bus_to_hcd(hdev->bus);
|
|
if (hcd->driver->get_resuming_ports) {
|
|
|
|
/*
|
|
* The get_resuming_ports() method returns a bitmap (origin 0)
|
|
* of ports which have started wakeup signaling but have not
|
|
* yet finished resuming. During system resume we will
|
|
* resume all the enabled ports, regardless of any wakeup
|
|
* signals, which means the wakeup requests would be lost.
|
|
* To prevent this, report them to the PM core here.
|
|
*/
|
|
resuming_ports = hcd->driver->get_resuming_ports(hcd);
|
|
for (i = 0; i < hdev->maxchild; ++i) {
|
|
if (test_bit(i, &resuming_ports)) {
|
|
udev = hub->ports[i]->child;
|
|
if (udev)
|
|
pm_wakeup_event(&udev->dev, 0);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int hub_resume(struct usb_interface *intf)
|
|
{
|
|
struct usb_hub *hub = usb_get_intfdata(intf);
|
|
|
|
dev_dbg(&intf->dev, "%s\n", __func__);
|
|
hub_activate(hub, HUB_RESUME);
|
|
|
|
/*
|
|
* This should be called only for system resume, not runtime resume.
|
|
* We can't tell the difference here, so some wakeup requests will be
|
|
* reported at the wrong time or more than once. This shouldn't
|
|
* matter much, so long as they do get reported.
|
|
*/
|
|
report_wakeup_requests(hub);
|
|
return 0;
|
|
}
|
|
|
|
static int hub_reset_resume(struct usb_interface *intf)
|
|
{
|
|
struct usb_hub *hub = usb_get_intfdata(intf);
|
|
|
|
dev_dbg(&intf->dev, "%s\n", __func__);
|
|
hub_activate(hub, HUB_RESET_RESUME);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
|
|
* @rhdev: struct usb_device for the root hub
|
|
*
|
|
* The USB host controller driver calls this function when its root hub
|
|
* is resumed and Vbus power has been interrupted or the controller
|
|
* has been reset. The routine marks @rhdev as having lost power.
|
|
* When the hub driver is resumed it will take notice and carry out
|
|
* power-session recovery for all the "USB-PERSIST"-enabled child devices;
|
|
* the others will be disconnected.
|
|
*/
|
|
void usb_root_hub_lost_power(struct usb_device *rhdev)
|
|
{
|
|
dev_notice(&rhdev->dev, "root hub lost power or was reset\n");
|
|
rhdev->reset_resume = 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
|
|
|
|
static const char * const usb3_lpm_names[] = {
|
|
"U0",
|
|
"U1",
|
|
"U2",
|
|
"U3",
|
|
};
|
|
|
|
/*
|
|
* Send a Set SEL control transfer to the device, prior to enabling
|
|
* device-initiated U1 or U2. This lets the device know the exit latencies from
|
|
* the time the device initiates a U1 or U2 exit, to the time it will receive a
|
|
* packet from the host.
|
|
*
|
|
* This function will fail if the SEL or PEL values for udev are greater than
|
|
* the maximum allowed values for the link state to be enabled.
|
|
*/
|
|
static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
|
|
{
|
|
struct usb_set_sel_req *sel_values;
|
|
unsigned long long u1_sel;
|
|
unsigned long long u1_pel;
|
|
unsigned long long u2_sel;
|
|
unsigned long long u2_pel;
|
|
int ret;
|
|
|
|
if (udev->state != USB_STATE_CONFIGURED)
|
|
return 0;
|
|
|
|
/* Convert SEL and PEL stored in ns to us */
|
|
u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
|
|
u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
|
|
u2_sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
|
|
u2_pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
|
|
|
|
/*
|
|
* Make sure that the calculated SEL and PEL values for the link
|
|
* state we're enabling aren't bigger than the max SEL/PEL
|
|
* value that will fit in the SET SEL control transfer.
|
|
* Otherwise the device would get an incorrect idea of the exit
|
|
* latency for the link state, and could start a device-initiated
|
|
* U1/U2 when the exit latencies are too high.
|
|
*/
|
|
if ((state == USB3_LPM_U1 &&
|
|
(u1_sel > USB3_LPM_MAX_U1_SEL_PEL ||
|
|
u1_pel > USB3_LPM_MAX_U1_SEL_PEL)) ||
|
|
(state == USB3_LPM_U2 &&
|
|
(u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
|
|
u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) {
|
|
dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n",
|
|
usb3_lpm_names[state], u1_sel, u1_pel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If we're enabling device-initiated LPM for one link state,
|
|
* but the other link state has a too high SEL or PEL value,
|
|
* just set those values to the max in the Set SEL request.
|
|
*/
|
|
if (u1_sel > USB3_LPM_MAX_U1_SEL_PEL)
|
|
u1_sel = USB3_LPM_MAX_U1_SEL_PEL;
|
|
|
|
if (u1_pel > USB3_LPM_MAX_U1_SEL_PEL)
|
|
u1_pel = USB3_LPM_MAX_U1_SEL_PEL;
|
|
|
|
if (u2_sel > USB3_LPM_MAX_U2_SEL_PEL)
|
|
u2_sel = USB3_LPM_MAX_U2_SEL_PEL;
|
|
|
|
if (u2_pel > USB3_LPM_MAX_U2_SEL_PEL)
|
|
u2_pel = USB3_LPM_MAX_U2_SEL_PEL;
|
|
|
|
/*
|
|
* usb_enable_lpm() can be called as part of a failed device reset,
|
|
* which may be initiated by an error path of a mass storage driver.
|
|
* Therefore, use GFP_NOIO.
|
|
*/
|
|
sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
|
|
if (!sel_values)
|
|
return -ENOMEM;
|
|
|
|
sel_values->u1_sel = u1_sel;
|
|
sel_values->u1_pel = u1_pel;
|
|
sel_values->u2_sel = cpu_to_le16(u2_sel);
|
|
sel_values->u2_pel = cpu_to_le16(u2_pel);
|
|
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_SEL,
|
|
USB_RECIP_DEVICE,
|
|
0, 0,
|
|
sel_values, sizeof *(sel_values),
|
|
USB_CTRL_SET_TIMEOUT);
|
|
kfree(sel_values);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Enable or disable device-initiated U1 or U2 transitions.
|
|
*/
|
|
static int usb_set_device_initiated_lpm(struct usb_device *udev,
|
|
enum usb3_link_state state, bool enable)
|
|
{
|
|
int ret;
|
|
int feature;
|
|
|
|
switch (state) {
|
|
case USB3_LPM_U1:
|
|
feature = USB_DEVICE_U1_ENABLE;
|
|
break;
|
|
case USB3_LPM_U2:
|
|
feature = USB_DEVICE_U2_ENABLE;
|
|
break;
|
|
default:
|
|
dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n",
|
|
__func__, enable ? "enable" : "disable");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (udev->state != USB_STATE_CONFIGURED) {
|
|
dev_dbg(&udev->dev, "%s: Can't %s %s state "
|
|
"for unconfigured device.\n",
|
|
__func__, enable ? "enable" : "disable",
|
|
usb3_lpm_names[state]);
|
|
return 0;
|
|
}
|
|
|
|
if (enable) {
|
|
/*
|
|
* Now send the control transfer to enable device-initiated LPM
|
|
* for either U1 or U2.
|
|
*/
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_FEATURE,
|
|
USB_RECIP_DEVICE,
|
|
feature,
|
|
0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
} else {
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_CLEAR_FEATURE,
|
|
USB_RECIP_DEVICE,
|
|
feature,
|
|
0, NULL, 0,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
if (ret < 0) {
|
|
dev_warn(&udev->dev, "%s of device-initiated %s failed.\n",
|
|
enable ? "Enable" : "Disable",
|
|
usb3_lpm_names[state]);
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int usb_set_lpm_timeout(struct usb_device *udev,
|
|
enum usb3_link_state state, int timeout)
|
|
{
|
|
int ret;
|
|
int feature;
|
|
|
|
switch (state) {
|
|
case USB3_LPM_U1:
|
|
feature = USB_PORT_FEAT_U1_TIMEOUT;
|
|
break;
|
|
case USB3_LPM_U2:
|
|
feature = USB_PORT_FEAT_U2_TIMEOUT;
|
|
break;
|
|
default:
|
|
dev_warn(&udev->dev, "%s: Can't set timeout for non-U1 or U2 state.\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state == USB3_LPM_U1 && timeout > USB3_LPM_U1_MAX_TIMEOUT &&
|
|
timeout != USB3_LPM_DEVICE_INITIATED) {
|
|
dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x, "
|
|
"which is a reserved value.\n",
|
|
usb3_lpm_names[state], timeout);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = set_port_feature(udev->parent,
|
|
USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum,
|
|
feature);
|
|
if (ret < 0) {
|
|
dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x,"
|
|
"error code %i\n", usb3_lpm_names[state],
|
|
timeout, ret);
|
|
return -EBUSY;
|
|
}
|
|
if (state == USB3_LPM_U1)
|
|
udev->u1_params.timeout = timeout;
|
|
else
|
|
udev->u2_params.timeout = timeout;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
|
|
* U1/U2 entry.
|
|
*
|
|
* We will attempt to enable U1 or U2, but there are no guarantees that the
|
|
* control transfers to set the hub timeout or enable device-initiated U1/U2
|
|
* will be successful.
|
|
*
|
|
* If the control transfer to enable device-initiated U1/U2 entry fails, then
|
|
* hub-initiated U1/U2 will be disabled.
|
|
*
|
|
* If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI
|
|
* driver know about it. If that call fails, it should be harmless, and just
|
|
* take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency.
|
|
*/
|
|
static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
|
|
enum usb3_link_state state)
|
|
{
|
|
int timeout, ret;
|
|
__u8 u1_mel = udev->bos->ss_cap->bU1devExitLat;
|
|
__le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat;
|
|
|
|
/* If the device says it doesn't have *any* exit latency to come out of
|
|
* U1 or U2, it's probably lying. Assume it doesn't implement that link
|
|
* state.
|
|
*/
|
|
if ((state == USB3_LPM_U1 && u1_mel == 0) ||
|
|
(state == USB3_LPM_U2 && u2_mel == 0))
|
|
return;
|
|
|
|
/*
|
|
* First, let the device know about the exit latencies
|
|
* associated with the link state we're about to enable.
|
|
*/
|
|
ret = usb_req_set_sel(udev, state);
|
|
if (ret < 0) {
|
|
dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n",
|
|
usb3_lpm_names[state]);
|
|
return;
|
|
}
|
|
|
|
/* We allow the host controller to set the U1/U2 timeout internally
|
|
* first, so that it can change its schedule to account for the
|
|
* additional latency to send data to a device in a lower power
|
|
* link state.
|
|
*/
|
|
timeout = hcd->driver->enable_usb3_lpm_timeout(hcd, udev, state);
|
|
|
|
/* xHCI host controller doesn't want to enable this LPM state. */
|
|
if (timeout == 0)
|
|
return;
|
|
|
|
if (timeout < 0) {
|
|
dev_warn(&udev->dev, "Could not enable %s link state, "
|
|
"xHCI error %i.\n", usb3_lpm_names[state],
|
|
timeout);
|
|
return;
|
|
}
|
|
|
|
if (usb_set_lpm_timeout(udev, state, timeout)) {
|
|
/* If we can't set the parent hub U1/U2 timeout,
|
|
* device-initiated LPM won't be allowed either, so let the xHCI
|
|
* host know that this link state won't be enabled.
|
|
*/
|
|
hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
|
|
return;
|
|
}
|
|
|
|
/* Only a configured device will accept the Set Feature
|
|
* U1/U2_ENABLE
|
|
*/
|
|
if (udev->actconfig &&
|
|
usb_set_device_initiated_lpm(udev, state, true) == 0) {
|
|
if (state == USB3_LPM_U1)
|
|
udev->usb3_lpm_u1_enabled = 1;
|
|
else if (state == USB3_LPM_U2)
|
|
udev->usb3_lpm_u2_enabled = 1;
|
|
} else {
|
|
/* Don't request U1/U2 entry if the device
|
|
* cannot transition to U1/U2.
|
|
*/
|
|
usb_set_lpm_timeout(udev, state, 0);
|
|
hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
|
|
* U1/U2 entry.
|
|
*
|
|
* If this function returns -EBUSY, the parent hub will still allow U1/U2 entry.
|
|
* If zero is returned, the parent will not allow the link to go into U1/U2.
|
|
*
|
|
* If zero is returned, device-initiated U1/U2 entry may still be enabled, but
|
|
* it won't have an effect on the bus link state because the parent hub will
|
|
* still disallow device-initiated U1/U2 entry.
|
|
*
|
|
* If zero is returned, the xHCI host controller may still think U1/U2 entry is
|
|
* possible. The result will be slightly more bus bandwidth will be taken up
|
|
* (to account for U1/U2 exit latency), but it should be harmless.
|
|
*/
|
|
static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
|
|
enum usb3_link_state state)
|
|
{
|
|
switch (state) {
|
|
case USB3_LPM_U1:
|
|
case USB3_LPM_U2:
|
|
break;
|
|
default:
|
|
dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (usb_set_lpm_timeout(udev, state, 0))
|
|
return -EBUSY;
|
|
|
|
usb_set_device_initiated_lpm(udev, state, false);
|
|
|
|
if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state))
|
|
dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
|
|
"bus schedule bandwidth may be impacted.\n",
|
|
usb3_lpm_names[state]);
|
|
|
|
/* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM
|
|
* is disabled. Hub will disallows link to enter U1/U2 as well,
|
|
* even device is initiating LPM. Hence LPM is disabled if hub LPM
|
|
* timeout set to 0, no matter device-initiated LPM is disabled or
|
|
* not.
|
|
*/
|
|
if (state == USB3_LPM_U1)
|
|
udev->usb3_lpm_u1_enabled = 0;
|
|
else if (state == USB3_LPM_U2)
|
|
udev->usb3_lpm_u2_enabled = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Disable hub-initiated and device-initiated U1 and U2 entry.
|
|
* Caller must own the bandwidth_mutex.
|
|
*
|
|
* This will call usb_enable_lpm() on failure, which will decrement
|
|
* lpm_disable_count, and will re-enable LPM if lpm_disable_count reaches zero.
|
|
*/
|
|
int usb_disable_lpm(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
|
|
if (!udev || !udev->parent ||
|
|
udev->speed < USB_SPEED_SUPER ||
|
|
!udev->lpm_capable ||
|
|
udev->state < USB_STATE_CONFIGURED)
|
|
return 0;
|
|
|
|
hcd = bus_to_hcd(udev->bus);
|
|
if (!hcd || !hcd->driver->disable_usb3_lpm_timeout)
|
|
return 0;
|
|
|
|
udev->lpm_disable_count++;
|
|
if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
|
|
return 0;
|
|
|
|
/* If LPM is enabled, attempt to disable it. */
|
|
if (usb_disable_link_state(hcd, udev, USB3_LPM_U1))
|
|
goto enable_lpm;
|
|
if (usb_disable_link_state(hcd, udev, USB3_LPM_U2))
|
|
goto enable_lpm;
|
|
|
|
return 0;
|
|
|
|
enable_lpm:
|
|
usb_enable_lpm(udev);
|
|
return -EBUSY;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_disable_lpm);
|
|
|
|
/* Grab the bandwidth_mutex before calling usb_disable_lpm() */
|
|
int usb_unlocked_disable_lpm(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
int ret;
|
|
|
|
if (!hcd)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(hcd->bandwidth_mutex);
|
|
ret = usb_disable_lpm(udev);
|
|
mutex_unlock(hcd->bandwidth_mutex);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
|
|
|
|
/*
|
|
* Attempt to enable device-initiated and hub-initiated U1 and U2 entry. The
|
|
* xHCI host policy may prevent U1 or U2 from being enabled.
|
|
*
|
|
* Other callers may have disabled link PM, so U1 and U2 entry will be disabled
|
|
* until the lpm_disable_count drops to zero. Caller must own the
|
|
* bandwidth_mutex.
|
|
*/
|
|
void usb_enable_lpm(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
struct usb_hub *hub;
|
|
struct usb_port *port_dev;
|
|
|
|
if (!udev || !udev->parent ||
|
|
udev->speed < USB_SPEED_SUPER ||
|
|
!udev->lpm_capable ||
|
|
udev->state < USB_STATE_CONFIGURED)
|
|
return;
|
|
|
|
udev->lpm_disable_count--;
|
|
hcd = bus_to_hcd(udev->bus);
|
|
/* Double check that we can both enable and disable LPM.
|
|
* Device must be configured to accept set feature U1/U2 timeout.
|
|
*/
|
|
if (!hcd || !hcd->driver->enable_usb3_lpm_timeout ||
|
|
!hcd->driver->disable_usb3_lpm_timeout)
|
|
return;
|
|
|
|
if (udev->lpm_disable_count > 0)
|
|
return;
|
|
|
|
hub = usb_hub_to_struct_hub(udev->parent);
|
|
if (!hub)
|
|
return;
|
|
|
|
port_dev = hub->ports[udev->portnum - 1];
|
|
|
|
if (port_dev->usb3_lpm_u1_permit)
|
|
usb_enable_link_state(hcd, udev, USB3_LPM_U1);
|
|
|
|
if (port_dev->usb3_lpm_u2_permit)
|
|
usb_enable_link_state(hcd, udev, USB3_LPM_U2);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_enable_lpm);
|
|
|
|
/* Grab the bandwidth_mutex before calling usb_enable_lpm() */
|
|
void usb_unlocked_enable_lpm(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
if (!hcd)
|
|
return;
|
|
|
|
mutex_lock(hcd->bandwidth_mutex);
|
|
usb_enable_lpm(udev);
|
|
mutex_unlock(hcd->bandwidth_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
|
|
|
|
/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */
|
|
static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
|
|
struct usb_port *port_dev)
|
|
{
|
|
struct usb_device *udev = port_dev->child;
|
|
int ret;
|
|
|
|
if (udev && udev->port_is_suspended && udev->do_remote_wakeup) {
|
|
ret = hub_set_port_link_state(hub, port_dev->portnum,
|
|
USB_SS_PORT_LS_U0);
|
|
if (!ret) {
|
|
msleep(USB_RESUME_TIMEOUT);
|
|
ret = usb_disable_remote_wakeup(udev);
|
|
}
|
|
if (ret)
|
|
dev_warn(&udev->dev,
|
|
"Port disable: can't disable remote wake\n");
|
|
udev->do_remote_wakeup = 0;
|
|
}
|
|
}
|
|
|
|
#else /* CONFIG_PM */
|
|
|
|
#define hub_suspend NULL
|
|
#define hub_resume NULL
|
|
#define hub_reset_resume NULL
|
|
|
|
static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub,
|
|
struct usb_port *port_dev) { }
|
|
|
|
int usb_disable_lpm(struct usb_device *udev)
|
|
{
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_disable_lpm);
|
|
|
|
void usb_enable_lpm(struct usb_device *udev) { }
|
|
EXPORT_SYMBOL_GPL(usb_enable_lpm);
|
|
|
|
int usb_unlocked_disable_lpm(struct usb_device *udev)
|
|
{
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
|
|
|
|
void usb_unlocked_enable_lpm(struct usb_device *udev) { }
|
|
EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
|
|
|
|
int usb_disable_ltm(struct usb_device *udev)
|
|
{
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_disable_ltm);
|
|
|
|
void usb_enable_ltm(struct usb_device *udev) { }
|
|
EXPORT_SYMBOL_GPL(usb_enable_ltm);
|
|
|
|
static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
|
|
u16 portstatus, u16 portchange)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*
|
|
* USB-3 does not have a similar link state as USB-2 that will avoid negotiating
|
|
* a connection with a plugged-in cable but will signal the host when the cable
|
|
* is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
|
|
*/
|
|
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
|
|
{
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
struct usb_device *hdev = hub->hdev;
|
|
int ret = 0;
|
|
|
|
if (!hub->error) {
|
|
if (hub_is_superspeed(hub->hdev)) {
|
|
hub_usb3_port_prepare_disable(hub, port_dev);
|
|
ret = hub_set_port_link_state(hub, port_dev->portnum,
|
|
USB_SS_PORT_LS_U3);
|
|
} else {
|
|
ret = usb_clear_port_feature(hdev, port1,
|
|
USB_PORT_FEAT_ENABLE);
|
|
}
|
|
}
|
|
if (port_dev->child && set_state)
|
|
usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
|
|
if (ret && ret != -ENODEV)
|
|
dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* usb_port_disable - disable a usb device's upstream port
|
|
* @udev: device to disable
|
|
* Context: @udev locked, must be able to sleep.
|
|
*
|
|
* Disables a USB device that isn't in active use.
|
|
*/
|
|
int usb_port_disable(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
|
|
|
|
return hub_port_disable(hub, udev->portnum, 0);
|
|
}
|
|
|
|
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
|
|
*
|
|
* Between connect detection and reset signaling there must be a delay
|
|
* of 100ms at least for debounce and power-settling. The corresponding
|
|
* timer shall restart whenever the downstream port detects a disconnect.
|
|
*
|
|
* Apparently there are some bluetooth and irda-dongles and a number of
|
|
* low-speed devices for which this debounce period may last over a second.
|
|
* Not covered by the spec - but easy to deal with.
|
|
*
|
|
* This implementation uses a 1500ms total debounce timeout; if the
|
|
* connection isn't stable by then it returns -ETIMEDOUT. It checks
|
|
* every 25ms for transient disconnects. When the port status has been
|
|
* unchanged for 100ms it returns the port status.
|
|
*/
|
|
int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected)
|
|
{
|
|
int ret;
|
|
u16 portchange, portstatus;
|
|
unsigned connection = 0xffff;
|
|
int total_time, stable_time = 0;
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
|
|
for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
|
|
ret = hub_port_status(hub, port1, &portstatus, &portchange);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(portchange & USB_PORT_STAT_C_CONNECTION) &&
|
|
(portstatus & USB_PORT_STAT_CONNECTION) == connection) {
|
|
if (!must_be_connected ||
|
|
(connection == USB_PORT_STAT_CONNECTION))
|
|
stable_time += HUB_DEBOUNCE_STEP;
|
|
if (stable_time >= HUB_DEBOUNCE_STABLE)
|
|
break;
|
|
} else {
|
|
stable_time = 0;
|
|
connection = portstatus & USB_PORT_STAT_CONNECTION;
|
|
}
|
|
|
|
if (portchange & USB_PORT_STAT_C_CONNECTION) {
|
|
usb_clear_port_feature(hub->hdev, port1,
|
|
USB_PORT_FEAT_C_CONNECTION);
|
|
}
|
|
|
|
if (total_time >= HUB_DEBOUNCE_TIMEOUT)
|
|
break;
|
|
msleep(HUB_DEBOUNCE_STEP);
|
|
}
|
|
|
|
dev_dbg(&port_dev->dev, "debounce total %dms stable %dms status 0x%x\n",
|
|
total_time, stable_time, portstatus);
|
|
|
|
if (stable_time < HUB_DEBOUNCE_STABLE)
|
|
return -ETIMEDOUT;
|
|
return portstatus;
|
|
}
|
|
|
|
void usb_ep0_reinit(struct usb_device *udev)
|
|
{
|
|
usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
|
|
usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
|
|
usb_enable_endpoint(udev, &udev->ep0, true);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_ep0_reinit);
|
|
|
|
#define usb_sndaddr0pipe() (PIPE_CONTROL << 30)
|
|
#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN)
|
|
|
|
static int hub_set_address(struct usb_device *udev, int devnum)
|
|
{
|
|
int retval;
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
/*
|
|
* The host controller will choose the device address,
|
|
* instead of the core having chosen it earlier
|
|
*/
|
|
if (!hcd->driver->address_device && devnum <= 1)
|
|
return -EINVAL;
|
|
if (udev->state == USB_STATE_ADDRESS)
|
|
return 0;
|
|
if (udev->state != USB_STATE_DEFAULT)
|
|
return -EINVAL;
|
|
if (hcd->driver->address_device)
|
|
retval = hcd->driver->address_device(hcd, udev);
|
|
else
|
|
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
|
|
USB_REQ_SET_ADDRESS, 0, devnum, 0,
|
|
NULL, 0, USB_CTRL_SET_TIMEOUT);
|
|
if (retval == 0) {
|
|
update_devnum(udev, devnum);
|
|
/* Device now using proper address. */
|
|
usb_set_device_state(udev, USB_STATE_ADDRESS);
|
|
usb_ep0_reinit(udev);
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
|
|
* when they're plugged into a USB 2.0 port, but they don't work when LPM is
|
|
* enabled.
|
|
*
|
|
* Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
|
|
* device says it supports the new USB 2.0 Link PM errata by setting the BESL
|
|
* support bit in the BOS descriptor.
|
|
*/
|
|
static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
|
|
int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
|
|
|
|
if (!udev->usb2_hw_lpm_capable || !udev->bos)
|
|
return;
|
|
|
|
if (hub)
|
|
connect_type = hub->ports[udev->portnum - 1]->connect_type;
|
|
|
|
if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
|
|
connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
|
|
udev->usb2_hw_lpm_allowed = 1;
|
|
usb_enable_usb2_hardware_lpm(udev);
|
|
}
|
|
}
|
|
|
|
static int hub_enable_device(struct usb_device *udev)
|
|
{
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
|
|
if (!hcd->driver->enable_device)
|
|
return 0;
|
|
if (udev->state == USB_STATE_ADDRESS)
|
|
return 0;
|
|
if (udev->state != USB_STATE_DEFAULT)
|
|
return -EINVAL;
|
|
|
|
return hcd->driver->enable_device(hcd, udev);
|
|
}
|
|
|
|
/* Reset device, (re)assign address, get device descriptor.
|
|
* Device connection must be stable, no more debouncing needed.
|
|
* Returns device in USB_STATE_ADDRESS, except on error.
|
|
*
|
|
* If this is called for an already-existing device (as part of
|
|
* usb_reset_and_verify_device), the caller must own the device lock and
|
|
* the port lock. For a newly detected device that is not accessible
|
|
* through any global pointers, it's not necessary to lock the device,
|
|
* but it is still necessary to lock the port.
|
|
*/
|
|
static int
|
|
hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
|
|
int retry_counter)
|
|
{
|
|
struct usb_device *hdev = hub->hdev;
|
|
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
int retries, operations, retval, i;
|
|
unsigned delay = HUB_SHORT_RESET_TIME;
|
|
enum usb_device_speed oldspeed = udev->speed;
|
|
const char *speed;
|
|
int devnum = udev->devnum;
|
|
const char *driver_name;
|
|
|
|
/* root hub ports have a slightly longer reset period
|
|
* (from USB 2.0 spec, section 7.1.7.5)
|
|
*/
|
|
if (!hdev->parent) {
|
|
delay = HUB_ROOT_RESET_TIME;
|
|
if (port1 == hdev->bus->otg_port)
|
|
hdev->bus->b_hnp_enable = 0;
|
|
}
|
|
|
|
/* Some low speed devices have problems with the quick delay, so */
|
|
/* be a bit pessimistic with those devices. RHbug #23670 */
|
|
if (oldspeed == USB_SPEED_LOW)
|
|
delay = HUB_LONG_RESET_TIME;
|
|
|
|
mutex_lock(hcd->address0_mutex);
|
|
|
|
/* Reset the device; full speed may morph to high speed */
|
|
/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
|
|
retval = hub_port_reset(hub, port1, udev, delay, false);
|
|
if (retval < 0) /* error or disconnect */
|
|
goto fail;
|
|
/* success, speed is known */
|
|
|
|
retval = -ENODEV;
|
|
|
|
/* Don't allow speed changes at reset, except usb 3.0 to faster */
|
|
if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed &&
|
|
!(oldspeed == USB_SPEED_SUPER && udev->speed > oldspeed)) {
|
|
dev_dbg(&udev->dev, "device reset changed speed!\n");
|
|
goto fail;
|
|
}
|
|
oldspeed = udev->speed;
|
|
|
|
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
|
|
* it's fixed size except for full speed devices.
|
|
* For Wireless USB devices, ep0 max packet is always 512 (tho
|
|
* reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
|
|
*/
|
|
switch (udev->speed) {
|
|
case USB_SPEED_SUPER_PLUS:
|
|
case USB_SPEED_SUPER:
|
|
case USB_SPEED_WIRELESS: /* fixed at 512 */
|
|
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
|
|
break;
|
|
case USB_SPEED_HIGH: /* fixed at 64 */
|
|
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
|
|
break;
|
|
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
|
|
/* to determine the ep0 maxpacket size, try to read
|
|
* the device descriptor to get bMaxPacketSize0 and
|
|
* then correct our initial guess.
|
|
*/
|
|
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
|
|
break;
|
|
case USB_SPEED_LOW: /* fixed at 8 */
|
|
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
|
|
break;
|
|
default:
|
|
goto fail;
|
|
}
|
|
|
|
if (udev->speed == USB_SPEED_WIRELESS)
|
|
speed = "variable speed Wireless";
|
|
else
|
|
speed = usb_speed_string(udev->speed);
|
|
|
|
/*
|
|
* The controller driver may be NULL if the controller device
|
|
* is the middle device between platform device and roothub.
|
|
* This middle device may not need a device driver due to
|
|
* all hardware control can be at platform device driver, this
|
|
* platform device is usually a dual-role USB controller device.
|
|
*/
|
|
if (udev->bus->controller->driver)
|
|
driver_name = udev->bus->controller->driver->name;
|
|
else
|
|
driver_name = udev->bus->sysdev->driver->name;
|
|
|
|
if (udev->speed < USB_SPEED_SUPER)
|
|
dev_info(&udev->dev,
|
|
"%s %s USB device number %d using %s\n",
|
|
(udev->config) ? "reset" : "new", speed,
|
|
devnum, driver_name);
|
|
|
|
/* Set up TT records, if needed */
|
|
if (hdev->tt) {
|
|
udev->tt = hdev->tt;
|
|
udev->ttport = hdev->ttport;
|
|
} else if (udev->speed != USB_SPEED_HIGH
|
|
&& hdev->speed == USB_SPEED_HIGH) {
|
|
if (!hub->tt.hub) {
|
|
dev_err(&udev->dev, "parent hub has no TT\n");
|
|
retval = -EINVAL;
|
|
goto fail;
|
|
}
|
|
udev->tt = &hub->tt;
|
|
udev->ttport = port1;
|
|
}
|
|
|
|
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
|
|
* Because device hardware and firmware is sometimes buggy in
|
|
* this area, and this is how Linux has done it for ages.
|
|
* Change it cautiously.
|
|
*
|
|
* NOTE: If use_new_scheme() is true we will start by issuing
|
|
* a 64-byte GET_DESCRIPTOR request. This is what Windows does,
|
|
* so it may help with some non-standards-compliant devices.
|
|
* Otherwise we start with SET_ADDRESS and then try to read the
|
|
* first 8 bytes of the device descriptor to get the ep0 maxpacket
|
|
* value.
|
|
*/
|
|
for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
|
|
bool did_new_scheme = false;
|
|
|
|
if (use_new_scheme(udev, retry_counter, port_dev)) {
|
|
struct usb_device_descriptor *buf;
|
|
int r = 0;
|
|
|
|
did_new_scheme = true;
|
|
retval = hub_enable_device(udev);
|
|
if (retval < 0) {
|
|
dev_err(&udev->dev,
|
|
"hub failed to enable device, error %d\n",
|
|
retval);
|
|
goto fail;
|
|
}
|
|
|
|
#define GET_DESCRIPTOR_BUFSIZE 64
|
|
buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
|
|
if (!buf) {
|
|
retval = -ENOMEM;
|
|
continue;
|
|
}
|
|
|
|
/* Retry on all errors; some devices are flakey.
|
|
* 255 is for WUSB devices, we actually need to use
|
|
* 512 (WUSB1.0[4.8.1]).
|
|
*/
|
|
for (operations = 0; operations < 3; ++operations) {
|
|
buf->bMaxPacketSize0 = 0;
|
|
r = usb_control_msg(udev, usb_rcvaddr0pipe(),
|
|
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
|
|
USB_DT_DEVICE << 8, 0,
|
|
buf, GET_DESCRIPTOR_BUFSIZE,
|
|
initial_descriptor_timeout);
|
|
switch (buf->bMaxPacketSize0) {
|
|
case 8: case 16: case 32: case 64: case 255:
|
|
if (buf->bDescriptorType ==
|
|
USB_DT_DEVICE) {
|
|
r = 0;
|
|
break;
|
|
}
|
|
/* FALL THROUGH */
|
|
default:
|
|
if (r == 0)
|
|
r = -EPROTO;
|
|
break;
|
|
}
|
|
/*
|
|
* Some devices time out if they are powered on
|
|
* when already connected. They need a second
|
|
* reset. But only on the first attempt,
|
|
* lest we get into a time out/reset loop
|
|
*/
|
|
if (r == 0 || (r == -ETIMEDOUT &&
|
|
retries == 0 &&
|
|
udev->speed > USB_SPEED_FULL))
|
|
break;
|
|
}
|
|
udev->descriptor.bMaxPacketSize0 =
|
|
buf->bMaxPacketSize0;
|
|
kfree(buf);
|
|
|
|
retval = hub_port_reset(hub, port1, udev, delay, false);
|
|
if (retval < 0) /* error or disconnect */
|
|
goto fail;
|
|
if (oldspeed != udev->speed) {
|
|
dev_dbg(&udev->dev,
|
|
"device reset changed speed!\n");
|
|
retval = -ENODEV;
|
|
goto fail;
|
|
}
|
|
if (r) {
|
|
if (r != -ENODEV)
|
|
dev_err(&udev->dev, "device descriptor read/64, error %d\n",
|
|
r);
|
|
retval = -EMSGSIZE;
|
|
continue;
|
|
}
|
|
#undef GET_DESCRIPTOR_BUFSIZE
|
|
}
|
|
|
|
/*
|
|
* If device is WUSB, we already assigned an
|
|
* unauthorized address in the Connect Ack sequence;
|
|
* authorization will assign the final address.
|
|
*/
|
|
if (udev->wusb == 0) {
|
|
for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) {
|
|
retval = hub_set_address(udev, devnum);
|
|
if (retval >= 0)
|
|
break;
|
|
msleep(200);
|
|
}
|
|
if (retval < 0) {
|
|
if (retval != -ENODEV)
|
|
dev_err(&udev->dev, "device not accepting address %d, error %d\n",
|
|
devnum, retval);
|
|
goto fail;
|
|
}
|
|
if (udev->speed >= USB_SPEED_SUPER) {
|
|
devnum = udev->devnum;
|
|
dev_info(&udev->dev,
|
|
"%s SuperSpeed%s%s USB device number %d using %s\n",
|
|
(udev->config) ? "reset" : "new",
|
|
(udev->speed == USB_SPEED_SUPER_PLUS) ?
|
|
"Plus Gen 2" : " Gen 1",
|
|
(udev->rx_lanes == 2 && udev->tx_lanes == 2) ?
|
|
"x2" : "",
|
|
devnum, driver_name);
|
|
}
|
|
|
|
/* cope with hardware quirkiness:
|
|
* - let SET_ADDRESS settle, some device hardware wants it
|
|
* - read ep0 maxpacket even for high and low speed,
|
|
*/
|
|
msleep(10);
|
|
/* use_new_scheme() checks the speed which may have
|
|
* changed since the initial look so we cache the result
|
|
* in did_new_scheme
|
|
*/
|
|
if (did_new_scheme)
|
|
break;
|
|
}
|
|
|
|
retval = usb_get_device_descriptor(udev, 8);
|
|
if (retval < 8) {
|
|
if (retval != -ENODEV)
|
|
dev_err(&udev->dev,
|
|
"device descriptor read/8, error %d\n",
|
|
retval);
|
|
if (retval >= 0)
|
|
retval = -EMSGSIZE;
|
|
} else {
|
|
u32 delay;
|
|
|
|
retval = 0;
|
|
|
|
delay = udev->parent->hub_delay;
|
|
udev->hub_delay = min_t(u32, delay,
|
|
USB_TP_TRANSMISSION_DELAY_MAX);
|
|
retval = usb_set_isoch_delay(udev);
|
|
if (retval) {
|
|
dev_dbg(&udev->dev,
|
|
"Failed set isoch delay, error %d\n",
|
|
retval);
|
|
retval = 0;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
if (retval)
|
|
goto fail;
|
|
|
|
/*
|
|
* Some superspeed devices have finished the link training process
|
|
* and attached to a superspeed hub port, but the device descriptor
|
|
* got from those devices show they aren't superspeed devices. Warm
|
|
* reset the port attached by the devices can fix them.
|
|
*/
|
|
if ((udev->speed >= USB_SPEED_SUPER) &&
|
|
(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
|
|
dev_err(&udev->dev, "got a wrong device descriptor, "
|
|
"warm reset device\n");
|
|
hub_port_reset(hub, port1, udev,
|
|
HUB_BH_RESET_TIME, true);
|
|
retval = -EINVAL;
|
|
goto fail;
|
|
}
|
|
|
|
if (udev->descriptor.bMaxPacketSize0 == 0xff ||
|
|
udev->speed >= USB_SPEED_SUPER)
|
|
i = 512;
|
|
else
|
|
i = udev->descriptor.bMaxPacketSize0;
|
|
if (usb_endpoint_maxp(&udev->ep0.desc) != i) {
|
|
if (udev->speed == USB_SPEED_LOW ||
|
|
!(i == 8 || i == 16 || i == 32 || i == 64)) {
|
|
dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i);
|
|
retval = -EMSGSIZE;
|
|
goto fail;
|
|
}
|
|
if (udev->speed == USB_SPEED_FULL)
|
|
dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
|
|
else
|
|
dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
|
|
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
|
|
usb_ep0_reinit(udev);
|
|
}
|
|
|
|
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
|
|
if (retval < (signed)sizeof(udev->descriptor)) {
|
|
if (retval != -ENODEV)
|
|
dev_err(&udev->dev, "device descriptor read/all, error %d\n",
|
|
retval);
|
|
if (retval >= 0)
|
|
retval = -ENOMSG;
|
|
goto fail;
|
|
}
|
|
|
|
usb_detect_quirks(udev);
|
|
|
|
if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
|
|
retval = usb_get_bos_descriptor(udev);
|
|
if (!retval) {
|
|
udev->lpm_capable = usb_device_supports_lpm(udev);
|
|
usb_set_lpm_parameters(udev);
|
|
}
|
|
}
|
|
|
|
retval = 0;
|
|
/* notify HCD that we have a device connected and addressed */
|
|
if (hcd->driver->update_device)
|
|
hcd->driver->update_device(hcd, udev);
|
|
hub_set_initial_usb2_lpm_policy(udev);
|
|
fail:
|
|
if (retval) {
|
|
hub_port_disable(hub, port1, 0);
|
|
update_devnum(udev, devnum); /* for disconnect processing */
|
|
}
|
|
mutex_unlock(hcd->address0_mutex);
|
|
return retval;
|
|
}
|
|
|
|
static void
|
|
check_highspeed(struct usb_hub *hub, struct usb_device *udev, int port1)
|
|
{
|
|
struct usb_qualifier_descriptor *qual;
|
|
int status;
|
|
|
|
if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
|
|
return;
|
|
|
|
qual = kmalloc(sizeof *qual, GFP_KERNEL);
|
|
if (qual == NULL)
|
|
return;
|
|
|
|
status = usb_get_descriptor(udev, USB_DT_DEVICE_QUALIFIER, 0,
|
|
qual, sizeof *qual);
|
|
if (status == sizeof *qual) {
|
|
dev_info(&udev->dev, "not running at top speed; "
|
|
"connect to a high speed hub\n");
|
|
/* hub LEDs are probably harder to miss than syslog */
|
|
if (hub->has_indicators) {
|
|
hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&hub->leds, 0);
|
|
}
|
|
}
|
|
kfree(qual);
|
|
}
|
|
|
|
static unsigned
|
|
hub_power_remaining(struct usb_hub *hub)
|
|
{
|
|
struct usb_device *hdev = hub->hdev;
|
|
int remaining;
|
|
int port1;
|
|
|
|
if (!hub->limited_power)
|
|
return 0;
|
|
|
|
remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent;
|
|
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
struct usb_device *udev = port_dev->child;
|
|
unsigned unit_load;
|
|
int delta;
|
|
|
|
if (!udev)
|
|
continue;
|
|
if (hub_is_superspeed(udev))
|
|
unit_load = 150;
|
|
else
|
|
unit_load = 100;
|
|
|
|
/*
|
|
* Unconfigured devices may not use more than one unit load,
|
|
* or 8mA for OTG ports
|
|
*/
|
|
if (udev->actconfig)
|
|
delta = usb_get_max_power(udev, udev->actconfig);
|
|
else if (port1 != udev->bus->otg_port || hdev->parent)
|
|
delta = unit_load;
|
|
else
|
|
delta = 8;
|
|
if (delta > hub->mA_per_port)
|
|
dev_warn(&port_dev->dev, "%dmA is over %umA budget!\n",
|
|
delta, hub->mA_per_port);
|
|
remaining -= delta;
|
|
}
|
|
if (remaining < 0) {
|
|
dev_warn(hub->intfdev, "%dmA over power budget!\n",
|
|
-remaining);
|
|
remaining = 0;
|
|
}
|
|
return remaining;
|
|
}
|
|
|
|
|
|
static int descriptors_changed(struct usb_device *udev,
|
|
struct usb_device_descriptor *old_device_descriptor,
|
|
struct usb_host_bos *old_bos)
|
|
{
|
|
int changed = 0;
|
|
unsigned index;
|
|
unsigned serial_len = 0;
|
|
unsigned len;
|
|
unsigned old_length;
|
|
int length;
|
|
char *buf;
|
|
|
|
if (memcmp(&udev->descriptor, old_device_descriptor,
|
|
sizeof(*old_device_descriptor)) != 0)
|
|
return 1;
|
|
|
|
if ((old_bos && !udev->bos) || (!old_bos && udev->bos))
|
|
return 1;
|
|
if (udev->bos) {
|
|
len = le16_to_cpu(udev->bos->desc->wTotalLength);
|
|
if (len != le16_to_cpu(old_bos->desc->wTotalLength))
|
|
return 1;
|
|
if (memcmp(udev->bos->desc, old_bos->desc, len))
|
|
return 1;
|
|
}
|
|
|
|
/* Since the idVendor, idProduct, and bcdDevice values in the
|
|
* device descriptor haven't changed, we will assume the
|
|
* Manufacturer and Product strings haven't changed either.
|
|
* But the SerialNumber string could be different (e.g., a
|
|
* different flash card of the same brand).
|
|
*/
|
|
if (udev->serial)
|
|
serial_len = strlen(udev->serial) + 1;
|
|
|
|
len = serial_len;
|
|
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
|
|
old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
|
|
len = max(len, old_length);
|
|
}
|
|
|
|
buf = kmalloc(len, GFP_NOIO);
|
|
if (!buf)
|
|
/* assume the worst */
|
|
return 1;
|
|
|
|
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
|
|
old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
|
|
length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf,
|
|
old_length);
|
|
if (length != old_length) {
|
|
dev_dbg(&udev->dev, "config index %d, error %d\n",
|
|
index, length);
|
|
changed = 1;
|
|
break;
|
|
}
|
|
if (memcmp(buf, udev->rawdescriptors[index], old_length)
|
|
!= 0) {
|
|
dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
|
|
index,
|
|
((struct usb_config_descriptor *) buf)->
|
|
bConfigurationValue);
|
|
changed = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!changed && serial_len) {
|
|
length = usb_string(udev, udev->descriptor.iSerialNumber,
|
|
buf, serial_len);
|
|
if (length + 1 != serial_len) {
|
|
dev_dbg(&udev->dev, "serial string error %d\n",
|
|
length);
|
|
changed = 1;
|
|
} else if (memcmp(buf, udev->serial, length) != 0) {
|
|
dev_dbg(&udev->dev, "serial string changed\n");
|
|
changed = 1;
|
|
}
|
|
}
|
|
|
|
kfree(buf);
|
|
return changed;
|
|
}
|
|
|
|
static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
|
|
u16 portchange)
|
|
{
|
|
int status = -ENODEV;
|
|
int i;
|
|
unsigned unit_load;
|
|
struct usb_device *hdev = hub->hdev;
|
|
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
struct usb_device *udev = port_dev->child;
|
|
static int unreliable_port = -1;
|
|
|
|
/* Disconnect any existing devices under this port */
|
|
if (udev) {
|
|
if (hcd->usb_phy && !hdev->parent)
|
|
usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
|
|
usb_disconnect(&port_dev->child);
|
|
}
|
|
|
|
/* We can forget about a "removed" device when there's a physical
|
|
* disconnect or the connect status changes.
|
|
*/
|
|
if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
|
|
(portchange & USB_PORT_STAT_C_CONNECTION))
|
|
clear_bit(port1, hub->removed_bits);
|
|
|
|
if (portchange & (USB_PORT_STAT_C_CONNECTION |
|
|
USB_PORT_STAT_C_ENABLE)) {
|
|
status = hub_port_debounce_be_stable(hub, port1);
|
|
if (status < 0) {
|
|
if (status != -ENODEV &&
|
|
port1 != unreliable_port &&
|
|
printk_ratelimit())
|
|
dev_err(&port_dev->dev, "connect-debounce failed\n");
|
|
portstatus &= ~USB_PORT_STAT_CONNECTION;
|
|
unreliable_port = port1;
|
|
} else {
|
|
portstatus = status;
|
|
}
|
|
}
|
|
|
|
/* Return now if debouncing failed or nothing is connected or
|
|
* the device was "removed".
|
|
*/
|
|
if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
|
|
test_bit(port1, hub->removed_bits)) {
|
|
|
|
/*
|
|
* maybe switch power back on (e.g. root hub was reset)
|
|
* but only if the port isn't owned by someone else.
|
|
*/
|
|
if (hub_is_port_power_switchable(hub)
|
|
&& !port_is_power_on(hub, portstatus)
|
|
&& !port_dev->port_owner)
|
|
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
|
|
|
|
if (portstatus & USB_PORT_STAT_ENABLE)
|
|
goto done;
|
|
return;
|
|
}
|
|
if (hub_is_superspeed(hub->hdev))
|
|
unit_load = 150;
|
|
else
|
|
unit_load = 100;
|
|
|
|
status = 0;
|
|
for (i = 0; i < SET_CONFIG_TRIES; i++) {
|
|
|
|
/* reallocate for each attempt, since references
|
|
* to the previous one can escape in various ways
|
|
*/
|
|
udev = usb_alloc_dev(hdev, hdev->bus, port1);
|
|
if (!udev) {
|
|
dev_err(&port_dev->dev,
|
|
"couldn't allocate usb_device\n");
|
|
goto done;
|
|
}
|
|
|
|
usb_set_device_state(udev, USB_STATE_POWERED);
|
|
udev->bus_mA = hub->mA_per_port;
|
|
udev->level = hdev->level + 1;
|
|
udev->wusb = hub_is_wusb(hub);
|
|
|
|
/* Devices connected to SuperSpeed hubs are USB 3.0 or later */
|
|
if (hub_is_superspeed(hub->hdev))
|
|
udev->speed = USB_SPEED_SUPER;
|
|
else
|
|
udev->speed = USB_SPEED_UNKNOWN;
|
|
|
|
choose_devnum(udev);
|
|
if (udev->devnum <= 0) {
|
|
status = -ENOTCONN; /* Don't retry */
|
|
goto loop;
|
|
}
|
|
|
|
/* reset (non-USB 3.0 devices) and get descriptor */
|
|
usb_lock_port(port_dev);
|
|
status = hub_port_init(hub, udev, port1, i);
|
|
usb_unlock_port(port_dev);
|
|
if (status < 0)
|
|
goto loop;
|
|
|
|
if (udev->quirks & USB_QUIRK_DELAY_INIT)
|
|
msleep(2000);
|
|
|
|
/* consecutive bus-powered hubs aren't reliable; they can
|
|
* violate the voltage drop budget. if the new child has
|
|
* a "powered" LED, users should notice we didn't enable it
|
|
* (without reading syslog), even without per-port LEDs
|
|
* on the parent.
|
|
*/
|
|
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB
|
|
&& udev->bus_mA <= unit_load) {
|
|
u16 devstat;
|
|
|
|
status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0,
|
|
&devstat);
|
|
if (status) {
|
|
dev_dbg(&udev->dev, "get status %d ?\n", status);
|
|
goto loop_disable;
|
|
}
|
|
if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
|
|
dev_err(&udev->dev,
|
|
"can't connect bus-powered hub "
|
|
"to this port\n");
|
|
if (hub->has_indicators) {
|
|
hub->indicator[port1-1] =
|
|
INDICATOR_AMBER_BLINK;
|
|
queue_delayed_work(
|
|
system_power_efficient_wq,
|
|
&hub->leds, 0);
|
|
}
|
|
status = -ENOTCONN; /* Don't retry */
|
|
goto loop_disable;
|
|
}
|
|
}
|
|
|
|
/* check for devices running slower than they could */
|
|
if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
|
|
&& udev->speed == USB_SPEED_FULL
|
|
&& highspeed_hubs != 0)
|
|
check_highspeed(hub, udev, port1);
|
|
|
|
/* Store the parent's children[] pointer. At this point
|
|
* udev becomes globally accessible, although presumably
|
|
* no one will look at it until hdev is unlocked.
|
|
*/
|
|
status = 0;
|
|
|
|
mutex_lock(&usb_port_peer_mutex);
|
|
|
|
/* We mustn't add new devices if the parent hub has
|
|
* been disconnected; we would race with the
|
|
* recursively_mark_NOTATTACHED() routine.
|
|
*/
|
|
spin_lock_irq(&device_state_lock);
|
|
if (hdev->state == USB_STATE_NOTATTACHED)
|
|
status = -ENOTCONN;
|
|
else
|
|
port_dev->child = udev;
|
|
spin_unlock_irq(&device_state_lock);
|
|
mutex_unlock(&usb_port_peer_mutex);
|
|
|
|
/* Run it through the hoops (find a driver, etc) */
|
|
if (!status) {
|
|
status = usb_new_device(udev);
|
|
if (status) {
|
|
mutex_lock(&usb_port_peer_mutex);
|
|
spin_lock_irq(&device_state_lock);
|
|
port_dev->child = NULL;
|
|
spin_unlock_irq(&device_state_lock);
|
|
mutex_unlock(&usb_port_peer_mutex);
|
|
} else {
|
|
if (hcd->usb_phy && !hdev->parent)
|
|
usb_phy_notify_connect(hcd->usb_phy,
|
|
udev->speed);
|
|
}
|
|
}
|
|
|
|
if (status)
|
|
goto loop_disable;
|
|
|
|
status = hub_power_remaining(hub);
|
|
if (status)
|
|
dev_dbg(hub->intfdev, "%dmA power budget left\n", status);
|
|
|
|
return;
|
|
|
|
loop_disable:
|
|
hub_port_disable(hub, port1, 1);
|
|
loop:
|
|
usb_ep0_reinit(udev);
|
|
release_devnum(udev);
|
|
hub_free_dev(udev);
|
|
usb_put_dev(udev);
|
|
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
|
|
break;
|
|
|
|
/* When halfway through our retry count, power-cycle the port */
|
|
if (i == (SET_CONFIG_TRIES / 2) - 1) {
|
|
dev_info(&port_dev->dev, "attempt power cycle\n");
|
|
usb_hub_set_port_power(hdev, hub, port1, false);
|
|
msleep(2 * hub_power_on_good_delay(hub));
|
|
usb_hub_set_port_power(hdev, hub, port1, true);
|
|
msleep(hub_power_on_good_delay(hub));
|
|
}
|
|
}
|
|
if (hub->hdev->parent ||
|
|
!hcd->driver->port_handed_over ||
|
|
!(hcd->driver->port_handed_over)(hcd, port1)) {
|
|
if (status != -ENOTCONN && status != -ENODEV)
|
|
dev_err(&port_dev->dev,
|
|
"unable to enumerate USB device\n");
|
|
}
|
|
|
|
done:
|
|
hub_port_disable(hub, port1, 1);
|
|
if (hcd->driver->relinquish_port && !hub->hdev->parent) {
|
|
if (status != -ENOTCONN && status != -ENODEV)
|
|
hcd->driver->relinquish_port(hcd, port1);
|
|
}
|
|
}
|
|
|
|
/* Handle physical or logical connection change events.
|
|
* This routine is called when:
|
|
* a port connection-change occurs;
|
|
* a port enable-change occurs (often caused by EMI);
|
|
* usb_reset_and_verify_device() encounters changed descriptors (as from
|
|
* a firmware download)
|
|
* caller already locked the hub
|
|
*/
|
|
static void hub_port_connect_change(struct usb_hub *hub, int port1,
|
|
u16 portstatus, u16 portchange)
|
|
__must_hold(&port_dev->status_lock)
|
|
{
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
struct usb_device *udev = port_dev->child;
|
|
struct usb_device_descriptor descriptor;
|
|
int status = -ENODEV;
|
|
int retval;
|
|
|
|
dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", portstatus,
|
|
portchange, portspeed(hub, portstatus));
|
|
|
|
if (hub->has_indicators) {
|
|
set_port_led(hub, port1, HUB_LED_AUTO);
|
|
hub->indicator[port1-1] = INDICATOR_AUTO;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_OTG
|
|
/* during HNP, don't repeat the debounce */
|
|
if (hub->hdev->bus->is_b_host)
|
|
portchange &= ~(USB_PORT_STAT_C_CONNECTION |
|
|
USB_PORT_STAT_C_ENABLE);
|
|
#endif
|
|
|
|
/* Try to resuscitate an existing device */
|
|
if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
|
|
udev->state != USB_STATE_NOTATTACHED) {
|
|
if (portstatus & USB_PORT_STAT_ENABLE) {
|
|
/*
|
|
* USB-3 connections are initialized automatically by
|
|
* the hostcontroller hardware. Therefore check for
|
|
* changed device descriptors before resuscitating the
|
|
* device.
|
|
*/
|
|
descriptor = udev->descriptor;
|
|
retval = usb_get_device_descriptor(udev,
|
|
sizeof(udev->descriptor));
|
|
if (retval < 0) {
|
|
dev_dbg(&udev->dev,
|
|
"can't read device descriptor %d\n",
|
|
retval);
|
|
} else {
|
|
if (descriptors_changed(udev, &descriptor,
|
|
udev->bos)) {
|
|
dev_dbg(&udev->dev,
|
|
"device descriptor has changed\n");
|
|
/* for disconnect() calls */
|
|
udev->descriptor = descriptor;
|
|
} else {
|
|
status = 0; /* Nothing to do */
|
|
}
|
|
}
|
|
#ifdef CONFIG_PM
|
|
} else if (udev->state == USB_STATE_SUSPENDED &&
|
|
udev->persist_enabled) {
|
|
/* For a suspended device, treat this as a
|
|
* remote wakeup event.
|
|
*/
|
|
usb_unlock_port(port_dev);
|
|
status = usb_remote_wakeup(udev);
|
|
usb_lock_port(port_dev);
|
|
#endif
|
|
} else {
|
|
/* Don't resuscitate */;
|
|
}
|
|
}
|
|
clear_bit(port1, hub->change_bits);
|
|
|
|
/* successfully revalidated the connection */
|
|
if (status == 0)
|
|
return;
|
|
|
|
usb_unlock_port(port_dev);
|
|
hub_port_connect(hub, port1, portstatus, portchange);
|
|
usb_lock_port(port_dev);
|
|
}
|
|
|
|
/* Handle notifying userspace about hub over-current events */
|
|
static void port_over_current_notify(struct usb_port *port_dev)
|
|
{
|
|
char *envp[3];
|
|
struct device *hub_dev;
|
|
char *port_dev_path;
|
|
|
|
sysfs_notify(&port_dev->dev.kobj, NULL, "over_current_count");
|
|
|
|
hub_dev = port_dev->dev.parent;
|
|
|
|
if (!hub_dev)
|
|
return;
|
|
|
|
port_dev_path = kobject_get_path(&port_dev->dev.kobj, GFP_KERNEL);
|
|
if (!port_dev_path)
|
|
return;
|
|
|
|
envp[0] = kasprintf(GFP_KERNEL, "OVER_CURRENT_PORT=%s", port_dev_path);
|
|
if (!envp[0])
|
|
goto exit_path;
|
|
|
|
envp[1] = kasprintf(GFP_KERNEL, "OVER_CURRENT_COUNT=%u",
|
|
port_dev->over_current_count);
|
|
if (!envp[1])
|
|
goto exit;
|
|
|
|
envp[2] = NULL;
|
|
kobject_uevent_env(&hub_dev->kobj, KOBJ_CHANGE, envp);
|
|
|
|
kfree(envp[1]);
|
|
exit:
|
|
kfree(envp[0]);
|
|
exit_path:
|
|
kfree(port_dev_path);
|
|
}
|
|
|
|
static void port_event(struct usb_hub *hub, int port1)
|
|
__must_hold(&port_dev->status_lock)
|
|
{
|
|
int connect_change;
|
|
struct usb_port *port_dev = hub->ports[port1 - 1];
|
|
struct usb_device *udev = port_dev->child;
|
|
struct usb_device *hdev = hub->hdev;
|
|
u16 portstatus, portchange;
|
|
|
|
connect_change = test_bit(port1, hub->change_bits);
|
|
clear_bit(port1, hub->event_bits);
|
|
clear_bit(port1, hub->wakeup_bits);
|
|
|
|
if (hub_port_status(hub, port1, &portstatus, &portchange) < 0)
|
|
return;
|
|
|
|
if (portchange & USB_PORT_STAT_C_CONNECTION) {
|
|
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
|
|
connect_change = 1;
|
|
}
|
|
|
|
if (portchange & USB_PORT_STAT_C_ENABLE) {
|
|
if (!connect_change)
|
|
dev_dbg(&port_dev->dev, "enable change, status %08x\n",
|
|
portstatus);
|
|
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
|
|
|
|
/*
|
|
* EM interference sometimes causes badly shielded USB devices
|
|
* to be shutdown by the hub, this hack enables them again.
|
|
* Works at least with mouse driver.
|
|
*/
|
|
if (!(portstatus & USB_PORT_STAT_ENABLE)
|
|
&& !connect_change && udev) {
|
|
dev_err(&port_dev->dev, "disabled by hub (EMI?), re-enabling...\n");
|
|
connect_change = 1;
|
|
}
|
|
}
|
|
|
|
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
|
|
u16 status = 0, unused;
|
|
port_dev->over_current_count++;
|
|
port_over_current_notify(port_dev);
|
|
|
|
dev_dbg(&port_dev->dev, "over-current change #%u\n",
|
|
port_dev->over_current_count);
|
|
usb_clear_port_feature(hdev, port1,
|
|
USB_PORT_FEAT_C_OVER_CURRENT);
|
|
msleep(100); /* Cool down */
|
|
hub_power_on(hub, true);
|
|
hub_port_status(hub, port1, &status, &unused);
|
|
if (status & USB_PORT_STAT_OVERCURRENT)
|
|
dev_err(&port_dev->dev, "over-current condition\n");
|
|
}
|
|
|
|
if (portchange & USB_PORT_STAT_C_RESET) {
|
|
dev_dbg(&port_dev->dev, "reset change\n");
|
|
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_RESET);
|
|
}
|
|
if ((portchange & USB_PORT_STAT_C_BH_RESET)
|
|
&& hub_is_superspeed(hdev)) {
|
|
dev_dbg(&port_dev->dev, "warm reset change\n");
|
|
usb_clear_port_feature(hdev, port1,
|
|
USB_PORT_FEAT_C_BH_PORT_RESET);
|
|
}
|
|
if (portchange & USB_PORT_STAT_C_LINK_STATE) {
|
|
dev_dbg(&port_dev->dev, "link state change\n");
|
|
usb_clear_port_feature(hdev, port1,
|
|
USB_PORT_FEAT_C_PORT_LINK_STATE);
|
|
}
|
|
if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
|
|
dev_warn(&port_dev->dev, "config error\n");
|
|
usb_clear_port_feature(hdev, port1,
|
|
USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
|
|
}
|
|
|
|
/* skip port actions that require the port to be powered on */
|
|
if (!pm_runtime_active(&port_dev->dev))
|
|
return;
|
|
|
|
if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange))
|
|
connect_change = 1;
|
|
|
|
/*
|
|
* Warm reset a USB3 protocol port if it's in
|
|
* SS.Inactive state.
|
|
*/
|
|
if (hub_port_warm_reset_required(hub, port1, portstatus)) {
|
|
dev_dbg(&port_dev->dev, "do warm reset\n");
|
|
if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION)
|
|
|| udev->state == USB_STATE_NOTATTACHED) {
|
|
if (hub_port_reset(hub, port1, NULL,
|
|
HUB_BH_RESET_TIME, true) < 0)
|
|
hub_port_disable(hub, port1, 1);
|
|
} else {
|
|
usb_unlock_port(port_dev);
|
|
usb_lock_device(udev);
|
|
usb_reset_device(udev);
|
|
usb_unlock_device(udev);
|
|
usb_lock_port(port_dev);
|
|
connect_change = 0;
|
|
}
|
|
}
|
|
|
|
if (connect_change)
|
|
hub_port_connect_change(hub, port1, portstatus, portchange);
|
|
}
|
|
|
|
static void hub_event(struct work_struct *work)
|
|
{
|
|
struct usb_device *hdev;
|
|
struct usb_interface *intf;
|
|
struct usb_hub *hub;
|
|
struct device *hub_dev;
|
|
u16 hubstatus;
|
|
u16 hubchange;
|
|
int i, ret;
|
|
|
|
hub = container_of(work, struct usb_hub, events);
|
|
hdev = hub->hdev;
|
|
hub_dev = hub->intfdev;
|
|
intf = to_usb_interface(hub_dev);
|
|
|
|
kcov_remote_start_usb((u64)hdev->bus->busnum);
|
|
|
|
dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
|
|
hdev->state, hdev->maxchild,
|
|
/* NOTE: expects max 15 ports... */
|
|
(u16) hub->change_bits[0],
|
|
(u16) hub->event_bits[0]);
|
|
|
|
/* Lock the device, then check to see if we were
|
|
* disconnected while waiting for the lock to succeed. */
|
|
usb_lock_device(hdev);
|
|
if (unlikely(hub->disconnected))
|
|
goto out_hdev_lock;
|
|
|
|
/* If the hub has died, clean up after it */
|
|
if (hdev->state == USB_STATE_NOTATTACHED) {
|
|
hub->error = -ENODEV;
|
|
hub_quiesce(hub, HUB_DISCONNECT);
|
|
goto out_hdev_lock;
|
|
}
|
|
|
|
/* Autoresume */
|
|
ret = usb_autopm_get_interface(intf);
|
|
if (ret) {
|
|
dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
|
|
goto out_hdev_lock;
|
|
}
|
|
|
|
/* If this is an inactive hub, do nothing */
|
|
if (hub->quiescing)
|
|
goto out_autopm;
|
|
|
|
if (hub->error) {
|
|
dev_dbg(hub_dev, "resetting for error %d\n", hub->error);
|
|
|
|
ret = usb_reset_device(hdev);
|
|
if (ret) {
|
|
dev_dbg(hub_dev, "error resetting hub: %d\n", ret);
|
|
goto out_autopm;
|
|
}
|
|
|
|
hub->nerrors = 0;
|
|
hub->error = 0;
|
|
}
|
|
|
|
/* deal with port status changes */
|
|
for (i = 1; i <= hdev->maxchild; i++) {
|
|
struct usb_port *port_dev = hub->ports[i - 1];
|
|
|
|
if (test_bit(i, hub->event_bits)
|
|
|| test_bit(i, hub->change_bits)
|
|
|| test_bit(i, hub->wakeup_bits)) {
|
|
/*
|
|
* The get_noresume and barrier ensure that if
|
|
* the port was in the process of resuming, we
|
|
* flush that work and keep the port active for
|
|
* the duration of the port_event(). However,
|
|
* if the port is runtime pm suspended
|
|
* (powered-off), we leave it in that state, run
|
|
* an abbreviated port_event(), and move on.
|
|
*/
|
|
pm_runtime_get_noresume(&port_dev->dev);
|
|
pm_runtime_barrier(&port_dev->dev);
|
|
usb_lock_port(port_dev);
|
|
port_event(hub, i);
|
|
usb_unlock_port(port_dev);
|
|
pm_runtime_put_sync(&port_dev->dev);
|
|
}
|
|
}
|
|
|
|
/* deal with hub status changes */
|
|
if (test_and_clear_bit(0, hub->event_bits) == 0)
|
|
; /* do nothing */
|
|
else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
|
|
dev_err(hub_dev, "get_hub_status failed\n");
|
|
else {
|
|
if (hubchange & HUB_CHANGE_LOCAL_POWER) {
|
|
dev_dbg(hub_dev, "power change\n");
|
|
clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
|
|
if (hubstatus & HUB_STATUS_LOCAL_POWER)
|
|
/* FIXME: Is this always true? */
|
|
hub->limited_power = 1;
|
|
else
|
|
hub->limited_power = 0;
|
|
}
|
|
if (hubchange & HUB_CHANGE_OVERCURRENT) {
|
|
u16 status = 0;
|
|
u16 unused;
|
|
|
|
dev_dbg(hub_dev, "over-current change\n");
|
|
clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
|
|
msleep(500); /* Cool down */
|
|
hub_power_on(hub, true);
|
|
hub_hub_status(hub, &status, &unused);
|
|
if (status & HUB_STATUS_OVERCURRENT)
|
|
dev_err(hub_dev, "over-current condition\n");
|
|
}
|
|
}
|
|
|
|
out_autopm:
|
|
/* Balance the usb_autopm_get_interface() above */
|
|
usb_autopm_put_interface_no_suspend(intf);
|
|
out_hdev_lock:
|
|
usb_unlock_device(hdev);
|
|
|
|
/* Balance the stuff in kick_hub_wq() and allow autosuspend */
|
|
usb_autopm_put_interface(intf);
|
|
kref_put(&hub->kref, hub_release);
|
|
|
|
kcov_remote_stop();
|
|
}
|
|
|
|
static const struct usb_device_id hub_id_table[] = {
|
|
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
|
|
.idVendor = USB_VENDOR_SMSC,
|
|
.bInterfaceClass = USB_CLASS_HUB,
|
|
.driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
|
|
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
|
|
| USB_DEVICE_ID_MATCH_INT_CLASS,
|
|
.idVendor = USB_VENDOR_GENESYS_LOGIC,
|
|
.bInterfaceClass = USB_CLASS_HUB,
|
|
.driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
|
|
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
|
|
.bDeviceClass = USB_CLASS_HUB},
|
|
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
|
|
.bInterfaceClass = USB_CLASS_HUB},
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, hub_id_table);
|
|
|
|
static struct usb_driver hub_driver = {
|
|
.name = "hub",
|
|
.probe = hub_probe,
|
|
.disconnect = hub_disconnect,
|
|
.suspend = hub_suspend,
|
|
.resume = hub_resume,
|
|
.reset_resume = hub_reset_resume,
|
|
.pre_reset = hub_pre_reset,
|
|
.post_reset = hub_post_reset,
|
|
.unlocked_ioctl = hub_ioctl,
|
|
.id_table = hub_id_table,
|
|
.supports_autosuspend = 1,
|
|
};
|
|
|
|
int usb_hub_init(void)
|
|
{
|
|
if (usb_register(&hub_driver) < 0) {
|
|
printk(KERN_ERR "%s: can't register hub driver\n",
|
|
usbcore_name);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* The workqueue needs to be freezable to avoid interfering with
|
|
* USB-PERSIST port handover. Otherwise it might see that a full-speed
|
|
* device was gone before the EHCI controller had handed its port
|
|
* over to the companion full-speed controller.
|
|
*/
|
|
hub_wq = alloc_workqueue("usb_hub_wq", WQ_FREEZABLE, 0);
|
|
if (hub_wq)
|
|
return 0;
|
|
|
|
/* Fall through if kernel_thread failed */
|
|
usb_deregister(&hub_driver);
|
|
pr_err("%s: can't allocate workqueue for usb hub\n", usbcore_name);
|
|
|
|
return -1;
|
|
}
|
|
|
|
void usb_hub_cleanup(void)
|
|
{
|
|
destroy_workqueue(hub_wq);
|
|
|
|
/*
|
|
* Hub resources are freed for us by usb_deregister. It calls
|
|
* usb_driver_purge on every device which in turn calls that
|
|
* devices disconnect function if it is using this driver.
|
|
* The hub_disconnect function takes care of releasing the
|
|
* individual hub resources. -greg
|
|
*/
|
|
usb_deregister(&hub_driver);
|
|
} /* usb_hub_cleanup() */
|
|
|
|
/**
|
|
* usb_reset_and_verify_device - perform a USB port reset to reinitialize a device
|
|
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
|
|
*
|
|
* WARNING - don't use this routine to reset a composite device
|
|
* (one with multiple interfaces owned by separate drivers)!
|
|
* Use usb_reset_device() instead.
|
|
*
|
|
* Do a port reset, reassign the device's address, and establish its
|
|
* former operating configuration. If the reset fails, or the device's
|
|
* descriptors change from their values before the reset, or the original
|
|
* configuration and altsettings cannot be restored, a flag will be set
|
|
* telling hub_wq to pretend the device has been disconnected and then
|
|
* re-connected. All drivers will be unbound, and the device will be
|
|
* re-enumerated and probed all over again.
|
|
*
|
|
* Return: 0 if the reset succeeded, -ENODEV if the device has been
|
|
* flagged for logical disconnection, or some other negative error code
|
|
* if the reset wasn't even attempted.
|
|
*
|
|
* Note:
|
|
* The caller must own the device lock and the port lock, the latter is
|
|
* taken by usb_reset_device(). For example, it's safe to use
|
|
* usb_reset_device() from a driver probe() routine after downloading
|
|
* new firmware. For calls that might not occur during probe(), drivers
|
|
* should lock the device using usb_lock_device_for_reset().
|
|
*
|
|
* Locking exception: This routine may also be called from within an
|
|
* autoresume handler. Such usage won't conflict with other tasks
|
|
* holding the device lock because these tasks should always call
|
|
* usb_autopm_resume_device(), thereby preventing any unwanted
|
|
* autoresume. The autoresume handler is expected to have already
|
|
* acquired the port lock before calling this routine.
|
|
*/
|
|
static int usb_reset_and_verify_device(struct usb_device *udev)
|
|
{
|
|
struct usb_device *parent_hdev = udev->parent;
|
|
struct usb_hub *parent_hub;
|
|
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
|
|
struct usb_device_descriptor descriptor = udev->descriptor;
|
|
struct usb_host_bos *bos;
|
|
int i, j, ret = 0;
|
|
int port1 = udev->portnum;
|
|
|
|
if (udev->state == USB_STATE_NOTATTACHED ||
|
|
udev->state == USB_STATE_SUSPENDED) {
|
|
dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
|
|
udev->state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!parent_hdev)
|
|
return -EISDIR;
|
|
|
|
parent_hub = usb_hub_to_struct_hub(parent_hdev);
|
|
|
|
/* Disable USB2 hardware LPM.
|
|
* It will be re-enabled by the enumeration process.
|
|
*/
|
|
usb_disable_usb2_hardware_lpm(udev);
|
|
|
|
/* Disable LPM while we reset the device and reinstall the alt settings.
|
|
* Device-initiated LPM, and system exit latency settings are cleared
|
|
* when the device is reset, so we have to set them up again.
|
|
*/
|
|
ret = usb_unlocked_disable_lpm(udev);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "%s Failed to disable LPM\n", __func__);
|
|
goto re_enumerate_no_bos;
|
|
}
|
|
|
|
bos = udev->bos;
|
|
udev->bos = NULL;
|
|
|
|
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
|
|
|
|
/* ep0 maxpacket size may change; let the HCD know about it.
|
|
* Other endpoints will be handled by re-enumeration. */
|
|
usb_ep0_reinit(udev);
|
|
ret = hub_port_init(parent_hub, udev, port1, i);
|
|
if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
|
|
break;
|
|
}
|
|
|
|
if (ret < 0)
|
|
goto re_enumerate;
|
|
|
|
/* Device might have changed firmware (DFU or similar) */
|
|
if (descriptors_changed(udev, &descriptor, bos)) {
|
|
dev_info(&udev->dev, "device firmware changed\n");
|
|
udev->descriptor = descriptor; /* for disconnect() calls */
|
|
goto re_enumerate;
|
|
}
|
|
|
|
/* Restore the device's previous configuration */
|
|
if (!udev->actconfig)
|
|
goto done;
|
|
|
|
mutex_lock(hcd->bandwidth_mutex);
|
|
ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
|
|
if (ret < 0) {
|
|
dev_warn(&udev->dev,
|
|
"Busted HC? Not enough HCD resources for "
|
|
"old configuration.\n");
|
|
mutex_unlock(hcd->bandwidth_mutex);
|
|
goto re_enumerate;
|
|
}
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_REQ_SET_CONFIGURATION, 0,
|
|
udev->actconfig->desc.bConfigurationValue, 0,
|
|
NULL, 0, USB_CTRL_SET_TIMEOUT);
|
|
if (ret < 0) {
|
|
dev_err(&udev->dev,
|
|
"can't restore configuration #%d (error=%d)\n",
|
|
udev->actconfig->desc.bConfigurationValue, ret);
|
|
mutex_unlock(hcd->bandwidth_mutex);
|
|
goto re_enumerate;
|
|
}
|
|
mutex_unlock(hcd->bandwidth_mutex);
|
|
usb_set_device_state(udev, USB_STATE_CONFIGURED);
|
|
|
|
/* Put interfaces back into the same altsettings as before.
|
|
* Don't bother to send the Set-Interface request for interfaces
|
|
* that were already in altsetting 0; besides being unnecessary,
|
|
* many devices can't handle it. Instead just reset the host-side
|
|
* endpoint state.
|
|
*/
|
|
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
|
|
struct usb_host_config *config = udev->actconfig;
|
|
struct usb_interface *intf = config->interface[i];
|
|
struct usb_interface_descriptor *desc;
|
|
|
|
desc = &intf->cur_altsetting->desc;
|
|
if (desc->bAlternateSetting == 0) {
|
|
usb_disable_interface(udev, intf, true);
|
|
usb_enable_interface(udev, intf, true);
|
|
ret = 0;
|
|
} else {
|
|
/* Let the bandwidth allocation function know that this
|
|
* device has been reset, and it will have to use
|
|
* alternate setting 0 as the current alternate setting.
|
|
*/
|
|
intf->resetting_device = 1;
|
|
ret = usb_set_interface(udev, desc->bInterfaceNumber,
|
|
desc->bAlternateSetting);
|
|
intf->resetting_device = 0;
|
|
}
|
|
if (ret < 0) {
|
|
dev_err(&udev->dev, "failed to restore interface %d "
|
|
"altsetting %d (error=%d)\n",
|
|
desc->bInterfaceNumber,
|
|
desc->bAlternateSetting,
|
|
ret);
|
|
goto re_enumerate;
|
|
}
|
|
/* Resetting also frees any allocated streams */
|
|
for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++)
|
|
intf->cur_altsetting->endpoint[j].streams = 0;
|
|
}
|
|
|
|
done:
|
|
/* Now that the alt settings are re-installed, enable LTM and LPM. */
|
|
usb_enable_usb2_hardware_lpm(udev);
|
|
usb_unlocked_enable_lpm(udev);
|
|
usb_enable_ltm(udev);
|
|
usb_release_bos_descriptor(udev);
|
|
udev->bos = bos;
|
|
return 0;
|
|
|
|
re_enumerate:
|
|
usb_release_bos_descriptor(udev);
|
|
udev->bos = bos;
|
|
re_enumerate_no_bos:
|
|
/* LPM state doesn't matter when we're about to destroy the device. */
|
|
hub_port_logical_disconnect(parent_hub, port1);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* usb_reset_device - warn interface drivers and perform a USB port reset
|
|
* @udev: device to reset (not in NOTATTACHED state)
|
|
*
|
|
* Warns all drivers bound to registered interfaces (using their pre_reset
|
|
* method), performs the port reset, and then lets the drivers know that
|
|
* the reset is over (using their post_reset method).
|
|
*
|
|
* Return: The same as for usb_reset_and_verify_device().
|
|
*
|
|
* Note:
|
|
* The caller must own the device lock. For example, it's safe to use
|
|
* this from a driver probe() routine after downloading new firmware.
|
|
* For calls that might not occur during probe(), drivers should lock
|
|
* the device using usb_lock_device_for_reset().
|
|
*
|
|
* If an interface is currently being probed or disconnected, we assume
|
|
* its driver knows how to handle resets. For all other interfaces,
|
|
* if the driver doesn't have pre_reset and post_reset methods then
|
|
* we attempt to unbind it and rebind afterward.
|
|
*/
|
|
int usb_reset_device(struct usb_device *udev)
|
|
{
|
|
int ret;
|
|
int i;
|
|
unsigned int noio_flag;
|
|
struct usb_port *port_dev;
|
|
struct usb_host_config *config = udev->actconfig;
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
|
|
|
|
if (udev->state == USB_STATE_NOTATTACHED) {
|
|
dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
|
|
udev->state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!udev->parent) {
|
|
/* this requires hcd-specific logic; see ohci_restart() */
|
|
dev_dbg(&udev->dev, "%s for root hub!\n", __func__);
|
|
return -EISDIR;
|
|
}
|
|
|
|
port_dev = hub->ports[udev->portnum - 1];
|
|
|
|
/*
|
|
* Don't allocate memory with GFP_KERNEL in current
|
|
* context to avoid possible deadlock if usb mass
|
|
* storage interface or usbnet interface(iSCSI case)
|
|
* is included in current configuration. The easist
|
|
* approach is to do it for every device reset,
|
|
* because the device 'memalloc_noio' flag may have
|
|
* not been set before reseting the usb device.
|
|
*/
|
|
noio_flag = memalloc_noio_save();
|
|
|
|
/* Prevent autosuspend during the reset */
|
|
usb_autoresume_device(udev);
|
|
|
|
if (config) {
|
|
for (i = 0; i < config->desc.bNumInterfaces; ++i) {
|
|
struct usb_interface *cintf = config->interface[i];
|
|
struct usb_driver *drv;
|
|
int unbind = 0;
|
|
|
|
if (cintf->dev.driver) {
|
|
drv = to_usb_driver(cintf->dev.driver);
|
|
if (drv->pre_reset && drv->post_reset)
|
|
unbind = (drv->pre_reset)(cintf);
|
|
else if (cintf->condition ==
|
|
USB_INTERFACE_BOUND)
|
|
unbind = 1;
|
|
if (unbind)
|
|
usb_forced_unbind_intf(cintf);
|
|
}
|
|
}
|
|
}
|
|
|
|
usb_lock_port(port_dev);
|
|
ret = usb_reset_and_verify_device(udev);
|
|
usb_unlock_port(port_dev);
|
|
|
|
if (config) {
|
|
for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
|
|
struct usb_interface *cintf = config->interface[i];
|
|
struct usb_driver *drv;
|
|
int rebind = cintf->needs_binding;
|
|
|
|
if (!rebind && cintf->dev.driver) {
|
|
drv = to_usb_driver(cintf->dev.driver);
|
|
if (drv->post_reset)
|
|
rebind = (drv->post_reset)(cintf);
|
|
else if (cintf->condition ==
|
|
USB_INTERFACE_BOUND)
|
|
rebind = 1;
|
|
if (rebind)
|
|
cintf->needs_binding = 1;
|
|
}
|
|
}
|
|
|
|
/* If the reset failed, hub_wq will unbind drivers later */
|
|
if (ret == 0)
|
|
usb_unbind_and_rebind_marked_interfaces(udev);
|
|
}
|
|
|
|
usb_autosuspend_device(udev);
|
|
memalloc_noio_restore(noio_flag);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_reset_device);
|
|
|
|
|
|
/**
|
|
* usb_queue_reset_device - Reset a USB device from an atomic context
|
|
* @iface: USB interface belonging to the device to reset
|
|
*
|
|
* This function can be used to reset a USB device from an atomic
|
|
* context, where usb_reset_device() won't work (as it blocks).
|
|
*
|
|
* Doing a reset via this method is functionally equivalent to calling
|
|
* usb_reset_device(), except for the fact that it is delayed to a
|
|
* workqueue. This means that any drivers bound to other interfaces
|
|
* might be unbound, as well as users from usbfs in user space.
|
|
*
|
|
* Corner cases:
|
|
*
|
|
* - Scheduling two resets at the same time from two different drivers
|
|
* attached to two different interfaces of the same device is
|
|
* possible; depending on how the driver attached to each interface
|
|
* handles ->pre_reset(), the second reset might happen or not.
|
|
*
|
|
* - If the reset is delayed so long that the interface is unbound from
|
|
* its driver, the reset will be skipped.
|
|
*
|
|
* - This function can be called during .probe(). It can also be called
|
|
* during .disconnect(), but doing so is pointless because the reset
|
|
* will not occur. If you really want to reset the device during
|
|
* .disconnect(), call usb_reset_device() directly -- but watch out
|
|
* for nested unbinding issues!
|
|
*/
|
|
void usb_queue_reset_device(struct usb_interface *iface)
|
|
{
|
|
if (schedule_work(&iface->reset_ws))
|
|
usb_get_intf(iface);
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_queue_reset_device);
|
|
|
|
/**
|
|
* usb_hub_find_child - Get the pointer of child device
|
|
* attached to the port which is specified by @port1.
|
|
* @hdev: USB device belonging to the usb hub
|
|
* @port1: port num to indicate which port the child device
|
|
* is attached to.
|
|
*
|
|
* USB drivers call this function to get hub's child device
|
|
* pointer.
|
|
*
|
|
* Return: %NULL if input param is invalid and
|
|
* child's usb_device pointer if non-NULL.
|
|
*/
|
|
struct usb_device *usb_hub_find_child(struct usb_device *hdev,
|
|
int port1)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
|
|
|
|
if (port1 < 1 || port1 > hdev->maxchild)
|
|
return NULL;
|
|
return hub->ports[port1 - 1]->child;
|
|
}
|
|
EXPORT_SYMBOL_GPL(usb_hub_find_child);
|
|
|
|
void usb_hub_adjust_deviceremovable(struct usb_device *hdev,
|
|
struct usb_hub_descriptor *desc)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
|
|
enum usb_port_connect_type connect_type;
|
|
int i;
|
|
|
|
if (!hub)
|
|
return;
|
|
|
|
if (!hub_is_superspeed(hdev)) {
|
|
for (i = 1; i <= hdev->maxchild; i++) {
|
|
struct usb_port *port_dev = hub->ports[i - 1];
|
|
|
|
connect_type = port_dev->connect_type;
|
|
if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
|
|
u8 mask = 1 << (i%8);
|
|
|
|
if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) {
|
|
dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
|
|
desc->u.hs.DeviceRemovable[i/8] |= mask;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable);
|
|
|
|
for (i = 1; i <= hdev->maxchild; i++) {
|
|
struct usb_port *port_dev = hub->ports[i - 1];
|
|
|
|
connect_type = port_dev->connect_type;
|
|
if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
|
|
u16 mask = 1 << i;
|
|
|
|
if (!(port_removable & mask)) {
|
|
dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
|
|
port_removable |= mask;
|
|
}
|
|
}
|
|
}
|
|
|
|
desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
/**
|
|
* usb_get_hub_port_acpi_handle - Get the usb port's acpi handle
|
|
* @hdev: USB device belonging to the usb hub
|
|
* @port1: port num of the port
|
|
*
|
|
* Return: Port's acpi handle if successful, %NULL if params are
|
|
* invalid.
|
|
*/
|
|
acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev,
|
|
int port1)
|
|
{
|
|
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
|
|
|
|
if (!hub)
|
|
return NULL;
|
|
|
|
return ACPI_HANDLE(&hub->ports[port1 - 1]->dev);
|
|
}
|
|
#endif
|