linux/drivers/gpio/gpio-menz127.c
Mika Westerberg 2956b5d94a pinctrl / gpio: Introduce .set_config() callback for GPIO chips
Currently we already have two pin configuration related callbacks
available for GPIO chips .set_single_ended() and .set_debounce(). In
future we expect to have even more, which does not scale well if we need
to add yet another callback to the GPIO chip structure for each possible
configuration parameter.

Better solution is to reuse what we already have available in the
generic pinconf.

To support this, we introduce a new .set_config() callback for GPIO
chips. The callback takes a single packed pin configuration value as
parameter. This can then be extended easily beyond what is currently
supported by just adding new types to the generic pinconf enum.

If the GPIO driver is backed up by a pinctrl driver the GPIO driver can
just assign gpiochip_generic_config() (introduced in this patch) to
.set_config and that will take care configuration requests are directed
to the pinctrl driver.

We then convert the existing drivers over .set_config() and finally
remove the .set_single_ended() and .set_debounce() callbacks.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26 15:27:37 +01:00

217 lines
5.1 KiB
C

/*
* MEN 16Z127 GPIO driver
*
* Copyright (C) 2016 MEN Mikroelektronik GmbH (www.men.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; version 2 of the License.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/mcb.h>
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#define MEN_Z127_CTRL 0x00
#define MEN_Z127_PSR 0x04
#define MEN_Z127_IRQR 0x08
#define MEN_Z127_GPIODR 0x0c
#define MEN_Z127_IER1 0x10
#define MEN_Z127_IER2 0x14
#define MEN_Z127_DBER 0x18
#define MEN_Z127_ODER 0x1C
#define GPIO_TO_DBCNT_REG(gpio) ((gpio * 4) + 0x80)
#define MEN_Z127_DB_MIN_US 50
/* 16 bit compare register. Each bit represents 50us */
#define MEN_Z127_DB_MAX_US (0xffff * MEN_Z127_DB_MIN_US)
#define MEN_Z127_DB_IN_RANGE(db) ((db >= MEN_Z127_DB_MIN_US) && \
(db <= MEN_Z127_DB_MAX_US))
struct men_z127_gpio {
struct gpio_chip gc;
void __iomem *reg_base;
struct resource *mem;
};
static int men_z127_debounce(struct gpio_chip *gc, unsigned gpio,
unsigned debounce)
{
struct men_z127_gpio *priv = gpiochip_get_data(gc);
struct device *dev = gc->parent;
unsigned int rnd;
u32 db_en, db_cnt;
if (!MEN_Z127_DB_IN_RANGE(debounce)) {
dev_err(dev, "debounce value %u out of range", debounce);
return -EINVAL;
}
if (debounce > 0) {
/* round up or down depending on MSB-1 */
rnd = fls(debounce) - 1;
if (rnd && (debounce & BIT(rnd - 1)))
debounce = round_up(debounce, MEN_Z127_DB_MIN_US);
else
debounce = round_down(debounce, MEN_Z127_DB_MIN_US);
if (debounce > MEN_Z127_DB_MAX_US)
debounce = MEN_Z127_DB_MAX_US;
/* 50us per register unit */
debounce /= 50;
}
spin_lock(&gc->bgpio_lock);
db_en = readl(priv->reg_base + MEN_Z127_DBER);
if (debounce == 0) {
db_en &= ~BIT(gpio);
db_cnt = 0;
} else {
db_en |= BIT(gpio);
db_cnt = debounce;
}
writel(db_en, priv->reg_base + MEN_Z127_DBER);
writel(db_cnt, priv->reg_base + GPIO_TO_DBCNT_REG(gpio));
spin_unlock(&gc->bgpio_lock);
return 0;
}
static int men_z127_set_single_ended(struct gpio_chip *gc,
unsigned offset,
enum pin_config_param param)
{
struct men_z127_gpio *priv = gpiochip_get_data(gc);
u32 od_en;
spin_lock(&gc->bgpio_lock);
od_en = readl(priv->reg_base + MEN_Z127_ODER);
if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
od_en |= BIT(offset);
else
/* Implicitly PIN_CONFIG_DRIVE_PUSH_PULL */
od_en &= ~BIT(offset);
writel(od_en, priv->reg_base + MEN_Z127_ODER);
spin_unlock(&gc->bgpio_lock);
return 0;
}
static int men_z127_set_config(struct gpio_chip *gc, unsigned offset,
unsigned long config)
{
enum pin_config_param param = pinconf_to_config_param(config);
switch (param) {
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
case PIN_CONFIG_DRIVE_PUSH_PULL:
return men_z127_set_single_ended(gc, offset, param);
case PIN_CONFIG_INPUT_DEBOUNCE:
return men_z127_debounce(gc, offset,
pinconf_to_config_argument(config));
default:
break;
}
return -ENOTSUPP;
}
static int men_z127_probe(struct mcb_device *mdev,
const struct mcb_device_id *id)
{
struct men_z127_gpio *men_z127_gpio;
struct device *dev = &mdev->dev;
int ret;
men_z127_gpio = devm_kzalloc(dev, sizeof(struct men_z127_gpio),
GFP_KERNEL);
if (!men_z127_gpio)
return -ENOMEM;
men_z127_gpio->mem = mcb_request_mem(mdev, dev_name(dev));
if (IS_ERR(men_z127_gpio->mem)) {
dev_err(dev, "failed to request device memory");
return PTR_ERR(men_z127_gpio->mem);
}
men_z127_gpio->reg_base = ioremap(men_z127_gpio->mem->start,
resource_size(men_z127_gpio->mem));
if (men_z127_gpio->reg_base == NULL) {
ret = -ENXIO;
goto err_release;
}
mcb_set_drvdata(mdev, men_z127_gpio);
ret = bgpio_init(&men_z127_gpio->gc, &mdev->dev, 4,
men_z127_gpio->reg_base + MEN_Z127_PSR,
men_z127_gpio->reg_base + MEN_Z127_CTRL,
NULL,
men_z127_gpio->reg_base + MEN_Z127_GPIODR,
NULL, 0);
if (ret)
goto err_unmap;
men_z127_gpio->gc.set_config = men_z127_set_config;
ret = gpiochip_add_data(&men_z127_gpio->gc, men_z127_gpio);
if (ret) {
dev_err(dev, "failed to register MEN 16Z127 GPIO controller");
goto err_unmap;
}
dev_info(dev, "MEN 16Z127 GPIO driver registered");
return 0;
err_unmap:
iounmap(men_z127_gpio->reg_base);
err_release:
mcb_release_mem(men_z127_gpio->mem);
return ret;
}
static void men_z127_remove(struct mcb_device *mdev)
{
struct men_z127_gpio *men_z127_gpio = mcb_get_drvdata(mdev);
gpiochip_remove(&men_z127_gpio->gc);
iounmap(men_z127_gpio->reg_base);
mcb_release_mem(men_z127_gpio->mem);
}
static const struct mcb_device_id men_z127_ids[] = {
{ .device = 0x7f },
{ }
};
MODULE_DEVICE_TABLE(mcb, men_z127_ids);
static struct mcb_driver men_z127_driver = {
.driver = {
.name = "z127-gpio",
},
.probe = men_z127_probe,
.remove = men_z127_remove,
.id_table = men_z127_ids,
};
module_mcb_driver(men_z127_driver);
MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
MODULE_DESCRIPTION("MEN 16z127 GPIO Controller");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("mcb:16z127");