korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 09:44:18 +08:00
Code Issues Packages Projects Releases Wiki Activity
291fef26e0
linux/drivers/scsi/in2000.h
Jeff Garzik f281233d3e SCSI host lock push-down 
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 13:33:23 -08:00

413 lines
14 KiB
C
Raw Blame History

/*
* in2000.h - Linux device driver definitions for the
* Always IN2000 ISA SCSI card.
*
* IMPORTANT: This file is for version 1.33 - 26/Aug/1998
*
* Copyright (c) 1996 John Shifflett, GeoLog Consulting
* john@geolog.com
* jshiffle@netcom.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef IN2000_H
#define IN2000_H
#include <asm/io.h>
#define PROC_INTERFACE /* add code for /proc/scsi/in2000/xxx interface */
#ifdef PROC_INTERFACE
#define PROC_STATISTICS /* add code for keeping various real time stats */
#endif
#define SYNC_DEBUG /* extra info on sync negotiation printed */
#define DEBUGGING_ON /* enable command-line debugging bitmask */
#define DEBUG_DEFAULTS 0 /* default bitmask - change from command-line */
#ifdef __i386__
#define FAST_READ_IO /* No problems with these on my machine */
#define FAST_WRITE_IO
#endif
#ifdef DEBUGGING_ON
#define DB(f,a) if (hostdata->args & (f)) a;
#define CHECK_NULL(p,s) /* if (!(p)) {printk("\n"); while (1) printk("NP:%s\r",(s));} */
#else
#define DB(f,a)
#define CHECK_NULL(p,s)
#endif
#define uchar unsigned char
#define read1_io(a) (inb(hostdata->io_base+(a)))
#define read2_io(a) (inw(hostdata->io_base+(a)))
#define write1_io(b,a) (outb((b),hostdata->io_base+(a)))
#define write2_io(w,a) (outw((w),hostdata->io_base+(a)))
#ifdef __i386__
/* These inline assembly defines are derived from a patch
* sent to me by Bill Earnest. He's done a lot of very
* valuable thinking, testing, and coding during his effort
* to squeeze more speed out of this driver. I really think
* that we are doing IO at close to the maximum now with
* the fifo. (And yes, insw uses 'edi' while outsw uses
* 'esi'. Thanks Bill!)
*/
#define FAST_READ2_IO() \
({ \
int __dummy_1,__dummy_2; \
__asm__ __volatile__ ("\n \
cld \n \
orl %%ecx, %%ecx \n \
jz 1f \n \
rep \n \
insw (%%dx),%%es:(%%edi) \n \
1: " \
: "=D" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2) /* output */ \
: "2" (f), "0" (sp), "1" (i) /* input */ \
); /* trashed */ \
})
#define FAST_WRITE2_IO() \
({ \
int __dummy_1,__dummy_2; \
__asm__ __volatile__ ("\n \
cld \n \
orl %%ecx, %%ecx \n \
jz 1f \n \
rep \n \
outsw %%ds:(%%esi),(%%dx) \n \
1: " \
: "=S" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2)/* output */ \
: "2" (f), "0" (sp), "1" (i) /* input */ \
); /* trashed */ \
})
#endif
/* IN2000 io_port offsets */
#define IO_WD_ASR 0x00 /* R - 3393 auxstat reg */
#define ASR_INT 0x80
#define ASR_LCI 0x40
#define ASR_BSY 0x20
#define ASR_CIP 0x10
#define ASR_PE 0x02
#define ASR_DBR 0x01
#define IO_WD_ADDR 0x00 /* W - 3393 address reg */
#define IO_WD_DATA 0x01 /* R/W - rest of 3393 regs */
#define IO_FIFO 0x02 /* R/W - in2000 dual-port fifo (16 bits) */
#define IN2000_FIFO_SIZE 2048 /* fifo capacity in bytes */
#define IO_CARD_RESET 0x03 /* W - in2000 start master reset */
#define IO_FIFO_COUNT 0x04 /* R - in2000 fifo counter */
#define IO_FIFO_WRITE 0x05 /* W - clear fifo counter, start write */
#define IO_FIFO_READ 0x07 /* W - start fifo read */
#define IO_LED_OFF 0x08 /* W - turn off in2000 activity LED */
#define IO_SWITCHES 0x08 /* R - read in2000 dip switch */
#define SW_ADDR0 0x01 /* bit 0 = bit 0 of index to io addr */
#define SW_ADDR1 0x02 /* bit 1 = bit 1 of index io addr */
#define SW_DISINT 0x04 /* bit 2 true if ints disabled */
#define SW_INT0 0x08 /* bit 3 = bit 0 of index to interrupt */
#define SW_INT1 0x10 /* bit 4 = bit 1 of index to interrupt */
#define SW_INT_SHIFT 3 /* shift right this amount to right justify int bits */
#define SW_SYNC_DOS5 0x20 /* bit 5 used by Always BIOS */
#define SW_FLOPPY 0x40 /* bit 6 true if floppy enabled */
#define SW_BIT7 0x80 /* bit 7 hardwired true (ground) */
#define IO_LED_ON 0x09 /* W - turn on in2000 activity LED */
#define IO_HARDWARE 0x0a /* R - read in2000 hardware rev, stop reset */
#define IO_INTR_MASK 0x0c /* W - in2000 interrupt mask reg */
#define IMASK_WD 0x01 /* WD33c93 interrupt mask */
#define IMASK_FIFO 0x02 /* FIFO interrupt mask */
/* wd register names */
#define WD_OWN_ID 0x00
#define WD_CONTROL 0x01
#define WD_TIMEOUT_PERIOD 0x02
#define WD_CDB_1 0x03
#define WD_CDB_2 0x04
#define WD_CDB_3 0x05
#define WD_CDB_4 0x06
#define WD_CDB_5 0x07
#define WD_CDB_6 0x08
#define WD_CDB_7 0x09
#define WD_CDB_8 0x0a
#define WD_CDB_9 0x0b
#define WD_CDB_10 0x0c
#define WD_CDB_11 0x0d
#define WD_CDB_12 0x0e
#define WD_TARGET_LUN 0x0f
#define WD_COMMAND_PHASE 0x10
#define WD_SYNCHRONOUS_TRANSFER 0x11
#define WD_TRANSFER_COUNT_MSB 0x12
#define WD_TRANSFER_COUNT 0x13
#define WD_TRANSFER_COUNT_LSB 0x14
#define WD_DESTINATION_ID 0x15
#define WD_SOURCE_ID 0x16
#define WD_SCSI_STATUS 0x17
#define WD_COMMAND 0x18
#define WD_DATA 0x19
#define WD_QUEUE_TAG 0x1a
#define WD_AUXILIARY_STATUS 0x1f
/* WD commands */
#define WD_CMD_RESET 0x00
#define WD_CMD_ABORT 0x01
#define WD_CMD_ASSERT_ATN 0x02
#define WD_CMD_NEGATE_ACK 0x03
#define WD_CMD_DISCONNECT 0x04
#define WD_CMD_RESELECT 0x05
#define WD_CMD_SEL_ATN 0x06
#define WD_CMD_SEL 0x07
#define WD_CMD_SEL_ATN_XFER 0x08
#define WD_CMD_SEL_XFER 0x09
#define WD_CMD_RESEL_RECEIVE 0x0a
#define WD_CMD_RESEL_SEND 0x0b
#define WD_CMD_WAIT_SEL_RECEIVE 0x0c
#define WD_CMD_TRANS_ADDR 0x18
#define WD_CMD_TRANS_INFO 0x20
#define WD_CMD_TRANSFER_PAD 0x21
#define WD_CMD_SBT_MODE 0x80
/* SCSI Bus Phases */
#define PHS_DATA_OUT 0x00
#define PHS_DATA_IN 0x01
#define PHS_COMMAND 0x02
#define PHS_STATUS 0x03
#define PHS_MESS_OUT 0x06
#define PHS_MESS_IN 0x07
/* Command Status Register definitions */
/* reset state interrupts */
#define CSR_RESET 0x00
#define CSR_RESET_AF 0x01
/* successful completion interrupts */
#define CSR_RESELECT 0x10
#define CSR_SELECT 0x11
#define CSR_SEL_XFER_DONE 0x16
#define CSR_XFER_DONE 0x18
/* paused or aborted interrupts */
#define CSR_MSGIN 0x20
#define CSR_SDP 0x21
#define CSR_SEL_ABORT 0x22
#define CSR_RESEL_ABORT 0x25
#define CSR_RESEL_ABORT_AM 0x27
#define CSR_ABORT 0x28
/* terminated interrupts */
#define CSR_INVALID 0x40
#define CSR_UNEXP_DISC 0x41
#define CSR_TIMEOUT 0x42
#define CSR_PARITY 0x43
#define CSR_PARITY_ATN 0x44
#define CSR_BAD_STATUS 0x45
#define CSR_UNEXP 0x48
/* service required interrupts */
#define CSR_RESEL 0x80
#define CSR_RESEL_AM 0x81
#define CSR_DISC 0x85
#define CSR_SRV_REQ 0x88
/* Own ID/CDB Size register */
#define OWNID_EAF 0x08
#define OWNID_EHP 0x10
#define OWNID_RAF 0x20
#define OWNID_FS_8 0x00
#define OWNID_FS_12 0x40
#define OWNID_FS_16 0x80
/* Control register */
#define CTRL_HSP 0x01
#define CTRL_HA 0x02
#define CTRL_IDI 0x04
#define CTRL_EDI 0x08
#define CTRL_HHP 0x10
#define CTRL_POLLED 0x00
#define CTRL_BURST 0x20
#define CTRL_BUS 0x40
#define CTRL_DMA 0x80
/* Timeout Period register */
#define TIMEOUT_PERIOD_VALUE 20 /* results in 200 ms. */
/* Synchronous Transfer Register */
#define STR_FSS 0x80
/* Destination ID register */
#define DSTID_DPD 0x40
#define DATA_OUT_DIR 0
#define DATA_IN_DIR 1
#define DSTID_SCC 0x80
/* Source ID register */
#define SRCID_MASK 0x07
#define SRCID_SIV 0x08
#define SRCID_DSP 0x20
#define SRCID_ES 0x40
#define SRCID_ER 0x80
#define ILLEGAL_STATUS_BYTE 0xff
#define DEFAULT_SX_PER 500 /* (ns) fairly safe */
#define DEFAULT_SX_OFF 0 /* aka async */
#define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */
#define OPTIMUM_SX_OFF 12 /* size of in2000 fifo */
struct sx_period {
unsigned int period_ns;
uchar reg_value;
};
struct IN2000_hostdata {
struct Scsi_Host *next;
uchar chip; /* what kind of wd33c93 chip? */
uchar microcode; /* microcode rev if 'B' */
unsigned short io_base; /* IO port base */
unsigned int dip_switch; /* dip switch settings */
unsigned int hrev; /* hardware revision of card */
volatile uchar busy[8]; /* index = target, bit = lun */
volatile Scsi_Cmnd *input_Q; /* commands waiting to be started */
volatile Scsi_Cmnd *selecting; /* trying to select this command */
volatile Scsi_Cmnd *connected; /* currently connected command */
volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */
uchar state; /* what we are currently doing */
uchar fifo; /* what the FIFO is up to */
uchar level2; /* extent to which Level-2 commands are used */
uchar disconnect; /* disconnect/reselect policy */
unsigned int args; /* set from command-line argument */
uchar incoming_msg[8]; /* filled during message_in phase */
int incoming_ptr; /* mainly used with EXTENDED messages */
uchar outgoing_msg[8]; /* send this during next message_out */
int outgoing_len; /* length of outgoing message */
unsigned int default_sx_per; /* default transfer period for SCSI bus */
uchar sync_xfer[8]; /* sync_xfer reg settings per target */
uchar sync_stat[8]; /* status of sync negotiation per target */
uchar sync_off; /* bit mask: don't use sync with these targets */
#ifdef PROC_INTERFACE
uchar proc; /* bit mask: what's in proc output */
#ifdef PROC_STATISTICS
unsigned long cmd_cnt[8]; /* # of commands issued per target */
unsigned long int_cnt; /* # of interrupts serviced */
unsigned long disc_allowed_cnt[8]; /* # of disconnects allowed per target */
unsigned long disc_done_cnt[8]; /* # of disconnects done per target*/
#endif
#endif
};
/* defines for hostdata->chip */
#define C_WD33C93 0
#define C_WD33C93A 1
#define C_WD33C93B 2
#define C_UNKNOWN_CHIP 100
/* defines for hostdata->state */
#define S_UNCONNECTED 0
#define S_SELECTING 1
#define S_RUNNING_LEVEL2 2
#define S_CONNECTED 3
#define S_PRE_TMP_DISC 4
#define S_PRE_CMP_DISC 5
/* defines for hostdata->fifo */
#define FI_FIFO_UNUSED 0
#define FI_FIFO_READING 1
#define FI_FIFO_WRITING 2
/* defines for hostdata->level2 */
/* NOTE: only the first 3 are trustworthy at this point -
* having trouble when more than 1 device is reading/writing
* at the same time...
*/
#define L2_NONE 0 /* no combination commands - we get lots of ints */
#define L2_SELECT 1 /* start with SEL_ATN_XFER, but never resume it */
#define L2_BASIC 2 /* resume after STATUS ints & RDP messages */
#define L2_DATA 3 /* resume after DATA_IN/OUT ints */
#define L2_MOST 4 /* resume after anything except a RESELECT int */
#define L2_RESELECT 5 /* resume after everything, including RESELECT ints */
#define L2_ALL 6 /* always resume */
/* defines for hostdata->disconnect */
#define DIS_NEVER 0
#define DIS_ADAPTIVE 1
#define DIS_ALWAYS 2
/* defines for hostdata->args */
#define DB_TEST 1<<0
#define DB_FIFO 1<<1
#define DB_QUEUE_COMMAND 1<<2
#define DB_EXECUTE 1<<3
#define DB_INTR 1<<4
#define DB_TRANSFER 1<<5
#define DB_MASK 0x3f
#define A_NO_SCSI_RESET 1<<15
/* defines for hostdata->sync_xfer[] */
#define SS_UNSET 0
#define SS_FIRST 1
#define SS_WAITING 2
#define SS_SET 3
/* defines for hostdata->proc */
#define PR_VERSION 1<<0
#define PR_INFO 1<<1
#define PR_STATISTICS 1<<2
#define PR_CONNECTED 1<<3
#define PR_INPUTQ 1<<4
#define PR_DISCQ 1<<5
#define PR_TEST 1<<6
#define PR_STOP 1<<7
# include <linux/init.h>
# include <linux/spinlock.h>
# define in2000__INITFUNC(function) __initfunc(function)
# define in2000__INIT __init
# define in2000__INITDATA __initdata
# define CLISPIN_LOCK(host,flags) spin_lock_irqsave(host->host_lock, flags)
# define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \
flags)
static int in2000_detect(struct scsi_host_template *) in2000__INIT;
static int in2000_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int in2000_abort(Scsi_Cmnd *);
static void in2000_setup(char *, int *) in2000__INIT;
static int in2000_biosparam(struct scsi_device *, struct block_device *,
sector_t, int *);
static int in2000_bus_reset(Scsi_Cmnd *);
#define IN2000_CAN_Q 16
#define IN2000_SG SG_ALL
#define IN2000_CPL 2
#define IN2000_HOST_ID 7
#endif /* IN2000_H */
Reference in New Issue View Git Blame Copy Permalink