mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 13:44:15 +08:00
6417f03132
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
663 lines
16 KiB
C
663 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* cpwd.c - driver implementation for hardware watchdog
|
|
* timers found on Sun Microsystems CP1400 and CP1500 boards.
|
|
*
|
|
* This device supports both the generic Linux watchdog
|
|
* interface and Solaris-compatible ioctls as best it is
|
|
* able.
|
|
*
|
|
* NOTE: CP1400 systems appear to have a defective intr_mask
|
|
* register on the PLD, preventing the disabling of
|
|
* timer interrupts. We use a timer to periodically
|
|
* reset 'stopped' watchdogs on affected platforms.
|
|
*
|
|
* Copyright (c) 2000 Eric Brower (ebrower@usa.net)
|
|
* Copyright (C) 2008 David S. Miller <davem@davemloft.net>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/major.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/watchdog.h>
|
|
|
|
#define DRIVER_NAME "cpwd"
|
|
|
|
#define WD_OBPNAME "watchdog"
|
|
#define WD_BADMODEL "SUNW,501-5336"
|
|
#define WD_BTIMEOUT (jiffies + (HZ * 1000))
|
|
#define WD_BLIMIT 0xFFFF
|
|
|
|
#define WD0_MINOR 212
|
|
#define WD1_MINOR 213
|
|
#define WD2_MINOR 214
|
|
|
|
/* Internal driver definitions. */
|
|
#define WD0_ID 0
|
|
#define WD1_ID 1
|
|
#define WD2_ID 2
|
|
#define WD_NUMDEVS 3
|
|
|
|
#define WD_INTR_OFF 0
|
|
#define WD_INTR_ON 1
|
|
|
|
#define WD_STAT_INIT 0x01 /* Watchdog timer is initialized */
|
|
#define WD_STAT_BSTOP 0x02 /* Watchdog timer is brokenstopped */
|
|
#define WD_STAT_SVCD 0x04 /* Watchdog interrupt occurred */
|
|
|
|
/* Register value definitions
|
|
*/
|
|
#define WD0_INTR_MASK 0x01 /* Watchdog device interrupt masks */
|
|
#define WD1_INTR_MASK 0x02
|
|
#define WD2_INTR_MASK 0x04
|
|
|
|
#define WD_S_RUNNING 0x01 /* Watchdog device status running */
|
|
#define WD_S_EXPIRED 0x02 /* Watchdog device status expired */
|
|
|
|
struct cpwd {
|
|
void __iomem *regs;
|
|
spinlock_t lock;
|
|
|
|
unsigned int irq;
|
|
|
|
unsigned long timeout;
|
|
bool enabled;
|
|
bool reboot;
|
|
bool broken;
|
|
bool initialized;
|
|
|
|
struct {
|
|
struct miscdevice misc;
|
|
void __iomem *regs;
|
|
u8 intr_mask;
|
|
u8 runstatus;
|
|
u16 timeout;
|
|
} devs[WD_NUMDEVS];
|
|
};
|
|
|
|
static DEFINE_MUTEX(cpwd_mutex);
|
|
static struct cpwd *cpwd_device;
|
|
|
|
/* Sun uses Altera PLD EPF8820ATC144-4
|
|
* providing three hardware watchdogs:
|
|
*
|
|
* 1) RIC - sends an interrupt when triggered
|
|
* 2) XIR - asserts XIR_B_RESET when triggered, resets CPU
|
|
* 3) POR - asserts POR_B_RESET when triggered, resets CPU, backplane, board
|
|
*
|
|
*** Timer register block definition (struct wd_timer_regblk)
|
|
*
|
|
* dcntr and limit registers (halfword access):
|
|
* -------------------
|
|
* | 15 | ...| 1 | 0 |
|
|
* -------------------
|
|
* |- counter val -|
|
|
* -------------------
|
|
* dcntr - Current 16-bit downcounter value.
|
|
* When downcounter reaches '0' watchdog expires.
|
|
* Reading this register resets downcounter with
|
|
* 'limit' value.
|
|
* limit - 16-bit countdown value in 1/10th second increments.
|
|
* Writing this register begins countdown with input value.
|
|
* Reading from this register does not affect counter.
|
|
* NOTES: After watchdog reset, dcntr and limit contain '1'
|
|
*
|
|
* status register (byte access):
|
|
* ---------------------------
|
|
* | 7 | ... | 2 | 1 | 0 |
|
|
* --------------+------------
|
|
* |- UNUSED -| EXP | RUN |
|
|
* ---------------------------
|
|
* status- Bit 0 - Watchdog is running
|
|
* Bit 1 - Watchdog has expired
|
|
*
|
|
*** PLD register block definition (struct wd_pld_regblk)
|
|
*
|
|
* intr_mask register (byte access):
|
|
* ---------------------------------
|
|
* | 7 | ... | 3 | 2 | 1 | 0 |
|
|
* +-------------+------------------
|
|
* |- UNUSED -| WD3 | WD2 | WD1 |
|
|
* ---------------------------------
|
|
* WD3 - 1 == Interrupt disabled for watchdog 3
|
|
* WD2 - 1 == Interrupt disabled for watchdog 2
|
|
* WD1 - 1 == Interrupt disabled for watchdog 1
|
|
*
|
|
* pld_status register (byte access):
|
|
* UNKNOWN, MAGICAL MYSTERY REGISTER
|
|
*
|
|
*/
|
|
#define WD_TIMER_REGSZ 16
|
|
#define WD0_OFF 0
|
|
#define WD1_OFF (WD_TIMER_REGSZ * 1)
|
|
#define WD2_OFF (WD_TIMER_REGSZ * 2)
|
|
#define PLD_OFF (WD_TIMER_REGSZ * 3)
|
|
|
|
#define WD_DCNTR 0x00
|
|
#define WD_LIMIT 0x04
|
|
#define WD_STATUS 0x08
|
|
|
|
#define PLD_IMASK (PLD_OFF + 0x00)
|
|
#define PLD_STATUS (PLD_OFF + 0x04)
|
|
|
|
static struct timer_list cpwd_timer;
|
|
|
|
static int wd0_timeout;
|
|
static int wd1_timeout;
|
|
static int wd2_timeout;
|
|
|
|
module_param(wd0_timeout, int, 0);
|
|
MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs");
|
|
module_param(wd1_timeout, int, 0);
|
|
MODULE_PARM_DESC(wd1_timeout, "Default watchdog1 timeout in 1/10secs");
|
|
module_param(wd2_timeout, int, 0);
|
|
MODULE_PARM_DESC(wd2_timeout, "Default watchdog2 timeout in 1/10secs");
|
|
|
|
MODULE_AUTHOR("Eric Brower <ebrower@usa.net>");
|
|
MODULE_DESCRIPTION("Hardware watchdog driver for Sun Microsystems CP1400/1500");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static void cpwd_writew(u16 val, void __iomem *addr)
|
|
{
|
|
writew(cpu_to_le16(val), addr);
|
|
}
|
|
static u16 cpwd_readw(void __iomem *addr)
|
|
{
|
|
u16 val = readw(addr);
|
|
|
|
return le16_to_cpu(val);
|
|
}
|
|
|
|
static void cpwd_writeb(u8 val, void __iomem *addr)
|
|
{
|
|
writeb(val, addr);
|
|
}
|
|
|
|
static u8 cpwd_readb(void __iomem *addr)
|
|
{
|
|
return readb(addr);
|
|
}
|
|
|
|
/* Enable or disable watchdog interrupts
|
|
* Because of the CP1400 defect this should only be
|
|
* called during initialzation or by wd_[start|stop]timer()
|
|
*
|
|
* index - sub-device index, or -1 for 'all'
|
|
* enable - non-zero to enable interrupts, zero to disable
|
|
*/
|
|
static void cpwd_toggleintr(struct cpwd *p, int index, int enable)
|
|
{
|
|
unsigned char curregs = cpwd_readb(p->regs + PLD_IMASK);
|
|
unsigned char setregs =
|
|
(index == -1) ?
|
|
(WD0_INTR_MASK | WD1_INTR_MASK | WD2_INTR_MASK) :
|
|
(p->devs[index].intr_mask);
|
|
|
|
if (enable == WD_INTR_ON)
|
|
curregs &= ~setregs;
|
|
else
|
|
curregs |= setregs;
|
|
|
|
cpwd_writeb(curregs, p->regs + PLD_IMASK);
|
|
}
|
|
|
|
/* Restarts timer with maximum limit value and
|
|
* does not unset 'brokenstop' value.
|
|
*/
|
|
static void cpwd_resetbrokentimer(struct cpwd *p, int index)
|
|
{
|
|
cpwd_toggleintr(p, index, WD_INTR_ON);
|
|
cpwd_writew(WD_BLIMIT, p->devs[index].regs + WD_LIMIT);
|
|
}
|
|
|
|
/* Timer method called to reset stopped watchdogs--
|
|
* because of the PLD bug on CP1400, we cannot mask
|
|
* interrupts within the PLD so me must continually
|
|
* reset the timers ad infinitum.
|
|
*/
|
|
static void cpwd_brokentimer(struct timer_list *unused)
|
|
{
|
|
struct cpwd *p = cpwd_device;
|
|
int id, tripped = 0;
|
|
|
|
/* kill a running timer instance, in case we
|
|
* were called directly instead of by kernel timer
|
|
*/
|
|
if (timer_pending(&cpwd_timer))
|
|
del_timer(&cpwd_timer);
|
|
|
|
for (id = 0; id < WD_NUMDEVS; id++) {
|
|
if (p->devs[id].runstatus & WD_STAT_BSTOP) {
|
|
++tripped;
|
|
cpwd_resetbrokentimer(p, id);
|
|
}
|
|
}
|
|
|
|
if (tripped) {
|
|
/* there is at least one timer brokenstopped-- reschedule */
|
|
cpwd_timer.expires = WD_BTIMEOUT;
|
|
add_timer(&cpwd_timer);
|
|
}
|
|
}
|
|
|
|
/* Reset countdown timer with 'limit' value and continue countdown.
|
|
* This will not start a stopped timer.
|
|
*/
|
|
static void cpwd_pingtimer(struct cpwd *p, int index)
|
|
{
|
|
if (cpwd_readb(p->devs[index].regs + WD_STATUS) & WD_S_RUNNING)
|
|
cpwd_readw(p->devs[index].regs + WD_DCNTR);
|
|
}
|
|
|
|
/* Stop a running watchdog timer-- the timer actually keeps
|
|
* running, but the interrupt is masked so that no action is
|
|
* taken upon expiration.
|
|
*/
|
|
static void cpwd_stoptimer(struct cpwd *p, int index)
|
|
{
|
|
if (cpwd_readb(p->devs[index].regs + WD_STATUS) & WD_S_RUNNING) {
|
|
cpwd_toggleintr(p, index, WD_INTR_OFF);
|
|
|
|
if (p->broken) {
|
|
p->devs[index].runstatus |= WD_STAT_BSTOP;
|
|
cpwd_brokentimer(NULL);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Start a watchdog timer with the specified limit value
|
|
* If the watchdog is running, it will be restarted with
|
|
* the provided limit value.
|
|
*
|
|
* This function will enable interrupts on the specified
|
|
* watchdog.
|
|
*/
|
|
static void cpwd_starttimer(struct cpwd *p, int index)
|
|
{
|
|
if (p->broken)
|
|
p->devs[index].runstatus &= ~WD_STAT_BSTOP;
|
|
|
|
p->devs[index].runstatus &= ~WD_STAT_SVCD;
|
|
|
|
cpwd_writew(p->devs[index].timeout, p->devs[index].regs + WD_LIMIT);
|
|
cpwd_toggleintr(p, index, WD_INTR_ON);
|
|
}
|
|
|
|
static int cpwd_getstatus(struct cpwd *p, int index)
|
|
{
|
|
unsigned char stat = cpwd_readb(p->devs[index].regs + WD_STATUS);
|
|
unsigned char intr = cpwd_readb(p->devs[index].regs + PLD_IMASK);
|
|
unsigned char ret = WD_STOPPED;
|
|
|
|
/* determine STOPPED */
|
|
if (!stat)
|
|
return ret;
|
|
|
|
/* determine EXPIRED vs FREERUN vs RUNNING */
|
|
else if (WD_S_EXPIRED & stat) {
|
|
ret = WD_EXPIRED;
|
|
} else if (WD_S_RUNNING & stat) {
|
|
if (intr & p->devs[index].intr_mask) {
|
|
ret = WD_FREERUN;
|
|
} else {
|
|
/* Fudge WD_EXPIRED status for defective CP1400--
|
|
* IF timer is running
|
|
* AND brokenstop is set
|
|
* AND an interrupt has been serviced
|
|
* we are WD_EXPIRED.
|
|
*
|
|
* IF timer is running
|
|
* AND brokenstop is set
|
|
* AND no interrupt has been serviced
|
|
* we are WD_FREERUN.
|
|
*/
|
|
if (p->broken &&
|
|
(p->devs[index].runstatus & WD_STAT_BSTOP)) {
|
|
if (p->devs[index].runstatus & WD_STAT_SVCD) {
|
|
ret = WD_EXPIRED;
|
|
} else {
|
|
/* we could as well pretend
|
|
* we are expired */
|
|
ret = WD_FREERUN;
|
|
}
|
|
} else {
|
|
ret = WD_RUNNING;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* determine SERVICED */
|
|
if (p->devs[index].runstatus & WD_STAT_SVCD)
|
|
ret |= WD_SERVICED;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t cpwd_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct cpwd *p = dev_id;
|
|
|
|
/* Only WD0 will interrupt-- others are NMI and we won't
|
|
* see them here....
|
|
*/
|
|
spin_lock_irq(&p->lock);
|
|
|
|
cpwd_stoptimer(p, WD0_ID);
|
|
p->devs[WD0_ID].runstatus |= WD_STAT_SVCD;
|
|
|
|
spin_unlock_irq(&p->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int cpwd_open(struct inode *inode, struct file *f)
|
|
{
|
|
struct cpwd *p = cpwd_device;
|
|
|
|
mutex_lock(&cpwd_mutex);
|
|
switch (iminor(inode)) {
|
|
case WD0_MINOR:
|
|
case WD1_MINOR:
|
|
case WD2_MINOR:
|
|
break;
|
|
|
|
default:
|
|
mutex_unlock(&cpwd_mutex);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Register IRQ on first open of device */
|
|
if (!p->initialized) {
|
|
if (request_irq(p->irq, &cpwd_interrupt,
|
|
IRQF_SHARED, DRIVER_NAME, p)) {
|
|
pr_err("Cannot register IRQ %d\n", p->irq);
|
|
mutex_unlock(&cpwd_mutex);
|
|
return -EBUSY;
|
|
}
|
|
p->initialized = true;
|
|
}
|
|
|
|
mutex_unlock(&cpwd_mutex);
|
|
|
|
return stream_open(inode, f);
|
|
}
|
|
|
|
static int cpwd_release(struct inode *inode, struct file *file)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static long cpwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
static const struct watchdog_info info = {
|
|
.options = WDIOF_SETTIMEOUT,
|
|
.firmware_version = 1,
|
|
.identity = DRIVER_NAME,
|
|
};
|
|
void __user *argp = (void __user *)arg;
|
|
struct inode *inode = file_inode(file);
|
|
int index = iminor(inode) - WD0_MINOR;
|
|
struct cpwd *p = cpwd_device;
|
|
int setopt = 0;
|
|
|
|
switch (cmd) {
|
|
/* Generic Linux IOCTLs */
|
|
case WDIOC_GETSUPPORT:
|
|
if (copy_to_user(argp, &info, sizeof(struct watchdog_info)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
if (put_user(0, (int __user *)argp))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case WDIOC_KEEPALIVE:
|
|
cpwd_pingtimer(p, index);
|
|
break;
|
|
|
|
case WDIOC_SETOPTIONS:
|
|
if (copy_from_user(&setopt, argp, sizeof(unsigned int)))
|
|
return -EFAULT;
|
|
|
|
if (setopt & WDIOS_DISABLECARD) {
|
|
if (p->enabled)
|
|
return -EINVAL;
|
|
cpwd_stoptimer(p, index);
|
|
} else if (setopt & WDIOS_ENABLECARD) {
|
|
cpwd_starttimer(p, index);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
/* Solaris-compatible IOCTLs */
|
|
case WIOCGSTAT:
|
|
setopt = cpwd_getstatus(p, index);
|
|
if (copy_to_user(argp, &setopt, sizeof(unsigned int)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case WIOCSTART:
|
|
cpwd_starttimer(p, index);
|
|
break;
|
|
|
|
case WIOCSTOP:
|
|
if (p->enabled)
|
|
return -EINVAL;
|
|
|
|
cpwd_stoptimer(p, index);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long cpwd_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
return cpwd_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
|
|
}
|
|
|
|
static ssize_t cpwd_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct inode *inode = file_inode(file);
|
|
struct cpwd *p = cpwd_device;
|
|
int index = iminor(inode);
|
|
|
|
if (count) {
|
|
cpwd_pingtimer(p, index);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t cpwd_read(struct file *file, char __user *buffer,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct file_operations cpwd_fops = {
|
|
.owner = THIS_MODULE,
|
|
.unlocked_ioctl = cpwd_ioctl,
|
|
.compat_ioctl = cpwd_compat_ioctl,
|
|
.open = cpwd_open,
|
|
.write = cpwd_write,
|
|
.read = cpwd_read,
|
|
.release = cpwd_release,
|
|
.llseek = no_llseek,
|
|
};
|
|
|
|
static int cpwd_probe(struct platform_device *op)
|
|
{
|
|
struct device_node *options;
|
|
const char *str_prop;
|
|
const void *prop_val;
|
|
int i, err = -EINVAL;
|
|
struct cpwd *p;
|
|
|
|
if (cpwd_device)
|
|
return -EINVAL;
|
|
|
|
p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL);
|
|
if (!p)
|
|
return -ENOMEM;
|
|
|
|
p->irq = op->archdata.irqs[0];
|
|
|
|
spin_lock_init(&p->lock);
|
|
|
|
p->regs = of_ioremap(&op->resource[0], 0,
|
|
4 * WD_TIMER_REGSZ, DRIVER_NAME);
|
|
if (!p->regs) {
|
|
pr_err("Unable to map registers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
options = of_find_node_by_path("/options");
|
|
if (!options) {
|
|
err = -ENODEV;
|
|
pr_err("Unable to find /options node\n");
|
|
goto out_iounmap;
|
|
}
|
|
|
|
prop_val = of_get_property(options, "watchdog-enable?", NULL);
|
|
p->enabled = (prop_val ? true : false);
|
|
|
|
prop_val = of_get_property(options, "watchdog-reboot?", NULL);
|
|
p->reboot = (prop_val ? true : false);
|
|
|
|
str_prop = of_get_property(options, "watchdog-timeout", NULL);
|
|
if (str_prop)
|
|
p->timeout = simple_strtoul(str_prop, NULL, 10);
|
|
|
|
of_node_put(options);
|
|
|
|
/* CP1400s seem to have broken PLD implementations-- the
|
|
* interrupt_mask register cannot be written, so no timer
|
|
* interrupts can be masked within the PLD.
|
|
*/
|
|
str_prop = of_get_property(op->dev.of_node, "model", NULL);
|
|
p->broken = (str_prop && !strcmp(str_prop, WD_BADMODEL));
|
|
|
|
if (!p->enabled)
|
|
cpwd_toggleintr(p, -1, WD_INTR_OFF);
|
|
|
|
for (i = 0; i < WD_NUMDEVS; i++) {
|
|
static const char *cpwd_names[] = { "RIC", "XIR", "POR" };
|
|
static int *parms[] = { &wd0_timeout,
|
|
&wd1_timeout,
|
|
&wd2_timeout };
|
|
struct miscdevice *mp = &p->devs[i].misc;
|
|
|
|
mp->minor = WD0_MINOR + i;
|
|
mp->name = cpwd_names[i];
|
|
mp->fops = &cpwd_fops;
|
|
|
|
p->devs[i].regs = p->regs + (i * WD_TIMER_REGSZ);
|
|
p->devs[i].intr_mask = (WD0_INTR_MASK << i);
|
|
p->devs[i].runstatus &= ~WD_STAT_BSTOP;
|
|
p->devs[i].runstatus |= WD_STAT_INIT;
|
|
p->devs[i].timeout = p->timeout;
|
|
if (*parms[i])
|
|
p->devs[i].timeout = *parms[i];
|
|
|
|
err = misc_register(&p->devs[i].misc);
|
|
if (err) {
|
|
pr_err("Could not register misc device for dev %d\n",
|
|
i);
|
|
goto out_unregister;
|
|
}
|
|
}
|
|
|
|
if (p->broken) {
|
|
timer_setup(&cpwd_timer, cpwd_brokentimer, 0);
|
|
cpwd_timer.expires = WD_BTIMEOUT;
|
|
|
|
pr_info("PLD defect workaround enabled for model %s\n",
|
|
WD_BADMODEL);
|
|
}
|
|
|
|
platform_set_drvdata(op, p);
|
|
cpwd_device = p;
|
|
return 0;
|
|
|
|
out_unregister:
|
|
for (i--; i >= 0; i--)
|
|
misc_deregister(&p->devs[i].misc);
|
|
|
|
out_iounmap:
|
|
of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int cpwd_remove(struct platform_device *op)
|
|
{
|
|
struct cpwd *p = platform_get_drvdata(op);
|
|
int i;
|
|
|
|
for (i = 0; i < WD_NUMDEVS; i++) {
|
|
misc_deregister(&p->devs[i].misc);
|
|
|
|
if (!p->enabled) {
|
|
cpwd_stoptimer(p, i);
|
|
if (p->devs[i].runstatus & WD_STAT_BSTOP)
|
|
cpwd_resetbrokentimer(p, i);
|
|
}
|
|
}
|
|
|
|
if (p->broken)
|
|
del_timer_sync(&cpwd_timer);
|
|
|
|
if (p->initialized)
|
|
free_irq(p->irq, p);
|
|
|
|
of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
|
|
|
|
cpwd_device = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id cpwd_match[] = {
|
|
{
|
|
.name = "watchdog",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cpwd_match);
|
|
|
|
static struct platform_driver cpwd_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = cpwd_match,
|
|
},
|
|
.probe = cpwd_probe,
|
|
.remove = cpwd_remove,
|
|
};
|
|
|
|
module_platform_driver(cpwd_driver);
|