korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-29 14:05:19 +08:00
Code Issues Packages Projects Releases Wiki Activity
28855385bf
linux/drivers/iio/health/max30102.c
Alexandru Ardelean 17395ce299 iio: make use of devm_iio_kfifo_buffer_setup() helper 
All drivers that already call devm_iio_kfifo_allocate() &
iio_device_attach_buffer() are simple to convert to
iio_device_attach_kfifo_buffer() in a single go.

This change does that; the unwind order is preserved.
What is important, is that the devm_iio_kfifo_buffer_setup() be called
after the indio_dev->modes is assigned, to make sure that
INDIO_BUFFER_SOFTWARE flag is set and not overridden by the assignment to
indio_dev->modes.

Also, the INDIO_BUFFER_SOFTWARE has been removed from the assignments of
'indio_dev->modes' because it is set by devm_iio_kfifo_buffer_setup().

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>x
Link: https://lore.kernel.org/r/20210215104043.91251-4-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11 20:47:01 +00:00

635 lines
16 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* max30102.c - Support for MAX30102 heart rate and pulse oximeter sensor
*
* Copyright (C) 2017 Matt Ranostay <matt.ranostay@konsulko.com>
*
* Support for MAX30105 optical particle sensor
* Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
*
* 7-bit I2C chip address: 0x57
* TODO: proximity power saving feature
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/kfifo_buf.h>
#define MAX30102_REGMAP_NAME "max30102_regmap"
#define MAX30102_DRV_NAME "max30102"
#define MAX30102_PART_NUMBER 0x15
enum max30102_chip_id {
max30102,
max30105,
};
enum max3012_led_idx {
MAX30102_LED_RED,
MAX30102_LED_IR,
MAX30105_LED_GREEN,
};
#define MAX30102_REG_INT_STATUS 0x00
#define MAX30102_REG_INT_STATUS_PWR_RDY BIT(0)
#define MAX30102_REG_INT_STATUS_PROX_INT BIT(4)
#define MAX30102_REG_INT_STATUS_ALC_OVF BIT(5)
#define MAX30102_REG_INT_STATUS_PPG_RDY BIT(6)
#define MAX30102_REG_INT_STATUS_FIFO_RDY BIT(7)
#define MAX30102_REG_INT_ENABLE 0x02
#define MAX30102_REG_INT_ENABLE_PROX_INT_EN BIT(4)
#define MAX30102_REG_INT_ENABLE_ALC_OVF_EN BIT(5)
#define MAX30102_REG_INT_ENABLE_PPG_EN BIT(6)
#define MAX30102_REG_INT_ENABLE_FIFO_EN BIT(7)
#define MAX30102_REG_INT_ENABLE_MASK 0xf0
#define MAX30102_REG_INT_ENABLE_MASK_SHIFT 4
#define MAX30102_REG_FIFO_WR_PTR 0x04
#define MAX30102_REG_FIFO_OVR_CTR 0x05
#define MAX30102_REG_FIFO_RD_PTR 0x06
#define MAX30102_REG_FIFO_DATA 0x07
#define MAX30102_REG_FIFO_DATA_BYTES 3
#define MAX30102_REG_FIFO_CONFIG 0x08
#define MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES BIT(1)
#define MAX30102_REG_FIFO_CONFIG_AVG_SHIFT 5
#define MAX30102_REG_FIFO_CONFIG_AFULL BIT(0)
#define MAX30102_REG_MODE_CONFIG 0x09
#define MAX30102_REG_MODE_CONFIG_MODE_NONE 0x00
#define MAX30102_REG_MODE_CONFIG_MODE_HR 0x02 /* red LED */
#define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2 0x03 /* red + IR LED */
#define MAX30102_REG_MODE_CONFIG_MODE_MULTI 0x07 /* multi-LED mode */
#define MAX30102_REG_MODE_CONFIG_MODE_MASK GENMASK(2, 0)
#define MAX30102_REG_MODE_CONFIG_PWR BIT(7)
#define MAX30102_REG_MODE_CONTROL_SLOT21 0x11 /* multi-LED control */
#define MAX30102_REG_MODE_CONTROL_SLOT43 0x12
#define MAX30102_REG_MODE_CONTROL_SLOT_MASK (GENMASK(6, 4) | GENMASK(2, 0))
#define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT 4
#define MAX30102_REG_SPO2_CONFIG 0x0a
#define MAX30102_REG_SPO2_CONFIG_PULSE_411_US 0x03
#define MAX30102_REG_SPO2_CONFIG_SR_400HZ 0x03
#define MAX30102_REG_SPO2_CONFIG_SR_MASK 0x07
#define MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT 2
#define MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS BIT(0)
#define MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT 5
#define MAX30102_REG_RED_LED_CONFIG 0x0c
#define MAX30102_REG_IR_LED_CONFIG 0x0d
#define MAX30105_REG_GREEN_LED_CONFIG 0x0e
#define MAX30102_REG_TEMP_CONFIG 0x21
#define MAX30102_REG_TEMP_CONFIG_TEMP_EN BIT(0)
#define MAX30102_REG_TEMP_INTEGER 0x1f
#define MAX30102_REG_TEMP_FRACTION 0x20
#define MAX30102_REG_REV_ID 0xfe
#define MAX30102_REG_PART_ID 0xff
struct max30102_data {
struct i2c_client *client;
struct iio_dev *indio_dev;
struct mutex lock;
struct regmap *regmap;
enum max30102_chip_id chip_id;
u8 buffer[12];
__be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */
};
static const struct regmap_config max30102_regmap_config = {
.name = MAX30102_REGMAP_NAME,
.reg_bits = 8,
.val_bits = 8,
};
static const unsigned long max30102_scan_masks[] = {
BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
0
};
static const unsigned long max30105_scan_masks[] = {
BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
BIT(MAX30105_LED_GREEN),
0
};
#define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \
.type = IIO_INTENSITY, \
.channel2 = _mod, \
.modified = 1, \
.scan_index = _si, \
.scan_type = { \
.sign = 'u', \
.shift = 8, \
.realbits = 18, \
.storagebits = 32, \
.endianness = IIO_BE, \
}, \
}
static const struct iio_chan_spec max30102_channels[] = {
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
{
.type = IIO_TEMP,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.scan_index = -1,
},
};
static const struct iio_chan_spec max30105_channels[] = {
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN),
{
.type = IIO_TEMP,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
.scan_index = -1,
},
};
static int max30102_set_power(struct max30102_data *data, bool en)
{
return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
MAX30102_REG_MODE_CONFIG_PWR,
en ? 0 : MAX30102_REG_MODE_CONFIG_PWR);
}
static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en)
{
u8 reg = mode;
if (!en)
reg |= MAX30102_REG_MODE_CONFIG_PWR;
return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
MAX30102_REG_MODE_CONFIG_PWR |
MAX30102_REG_MODE_CONFIG_MODE_MASK, reg);
}
#define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \
((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1)
static int max30102_buffer_postenable(struct iio_dev *indio_dev)
{
struct max30102_data *data = iio_priv(indio_dev);
int ret;
u8 reg;
switch (*indio_dev->active_scan_mask) {
case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR):
reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
break;
case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
BIT(MAX30105_LED_GREEN):
ret = regmap_update_bits(data->regmap,
MAX30102_REG_MODE_CONTROL_SLOT21,
MAX30102_REG_MODE_CONTROL_SLOT_MASK,
MAX30102_MODE_CONTROL_LED_SLOTS(2, 1));
if (ret)
return ret;
ret = regmap_update_bits(data->regmap,
MAX30102_REG_MODE_CONTROL_SLOT43,
MAX30102_REG_MODE_CONTROL_SLOT_MASK,
MAX30102_MODE_CONTROL_LED_SLOTS(0, 3));
if (ret)
return ret;
reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI;
break;
default:
return -EINVAL;
}
return max30102_set_powermode(data, reg, true);
}
static int max30102_buffer_predisable(struct iio_dev *indio_dev)
{
struct max30102_data *data = iio_priv(indio_dev);
return max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
false);
}
static const struct iio_buffer_setup_ops max30102_buffer_setup_ops = {
.postenable = max30102_buffer_postenable,
.predisable = max30102_buffer_predisable,
};
static inline int max30102_fifo_count(struct max30102_data *data)
{
unsigned int val;
int ret;
ret = regmap_read(data->regmap, MAX30102_REG_INT_STATUS, &val);
if (ret)
return ret;
/* FIFO has one sample slot left */
if (val & MAX30102_REG_INT_STATUS_FIFO_RDY)
return 1;
return 0;
}
#define MAX30102_COPY_DATA(i) \
memcpy(&data->processed_buffer[(i)], \
&buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \
MAX30102_REG_FIFO_DATA_BYTES)
static int max30102_read_measurement(struct max30102_data *data,
unsigned int measurements)
{
int ret;
u8 *buffer = (u8 *) &data->buffer;
ret = i2c_smbus_read_i2c_block_data(data->client,
MAX30102_REG_FIFO_DATA,
measurements *
MAX30102_REG_FIFO_DATA_BYTES,
buffer);
switch (measurements) {
case 3:
MAX30102_COPY_DATA(2);
fallthrough;
case 2:
MAX30102_COPY_DATA(1);
fallthrough;
case 1:
MAX30102_COPY_DATA(0);
break;
default:
return -EINVAL;
}
return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ?
0 : -EINVAL;
}
static irqreturn_t max30102_interrupt_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct max30102_data *data = iio_priv(indio_dev);
unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask,
indio_dev->masklength);
int ret, cnt = 0;
mutex_lock(&data->lock);
while (cnt || (cnt = max30102_fifo_count(data)) > 0) {
ret = max30102_read_measurement(data, measurements);
if (ret)
break;
iio_push_to_buffers(data->indio_dev, data->processed_buffer);
cnt--;
}
mutex_unlock(&data->lock);
return IRQ_HANDLED;
}
static int max30102_get_current_idx(unsigned int val, int *reg)
{
/* each step is 0.200 mA */
*reg = val / 200;
return *reg > 0xff ? -EINVAL : 0;
}
static int max30102_led_init(struct max30102_data *data)
{
struct device *dev = &data->client->dev;
unsigned int val;
int reg, ret;
ret = device_property_read_u32(dev, "maxim,red-led-current-microamp", &val);
if (ret) {
dev_info(dev, "no red-led-current-microamp set\n");
/* Default to 7 mA RED LED */
val = 7000;
}
ret = max30102_get_current_idx(val, &reg);
if (ret) {
dev_err(dev, "invalid RED LED current setting %d\n", val);
return ret;
}
ret = regmap_write(data->regmap, MAX30102_REG_RED_LED_CONFIG, reg);
if (ret)
return ret;
if (data->chip_id == max30105) {
ret = device_property_read_u32(dev,
"maxim,green-led-current-microamp", &val);
if (ret) {
dev_info(dev, "no green-led-current-microamp set\n");
/* Default to 7 mA green LED */
val = 7000;
}
ret = max30102_get_current_idx(val, &reg);
if (ret) {
dev_err(dev, "invalid green LED current setting %d\n",
val);
return ret;
}
ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG,
reg);
if (ret)
return ret;
}
ret = device_property_read_u32(dev, "maxim,ir-led-current-microamp", &val);
if (ret) {
dev_info(dev, "no ir-led-current-microamp set\n");
/* Default to 7 mA IR LED */
val = 7000;
}
ret = max30102_get_current_idx(val, &reg);
if (ret) {
dev_err(dev, "invalid IR LED current setting %d\n", val);
return ret;
}
return regmap_write(data->regmap, MAX30102_REG_IR_LED_CONFIG, reg);
}
static int max30102_chip_init(struct max30102_data *data)
{
int ret;
/* setup LED current settings */
ret = max30102_led_init(data);
if (ret)
return ret;
/* configure 18-bit HR + SpO2 readings at 400Hz */
ret = regmap_write(data->regmap, MAX30102_REG_SPO2_CONFIG,
(MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS
<< MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT) |
(MAX30102_REG_SPO2_CONFIG_SR_400HZ
<< MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT) |
MAX30102_REG_SPO2_CONFIG_PULSE_411_US);
if (ret)
return ret;
/* average 4 samples + generate FIFO interrupt */
ret = regmap_write(data->regmap, MAX30102_REG_FIFO_CONFIG,
(MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES
<< MAX30102_REG_FIFO_CONFIG_AVG_SHIFT) |
MAX30102_REG_FIFO_CONFIG_AFULL);
if (ret)
return ret;
/* enable FIFO interrupt */
return regmap_update_bits(data->regmap, MAX30102_REG_INT_ENABLE,
MAX30102_REG_INT_ENABLE_MASK,
MAX30102_REG_INT_ENABLE_FIFO_EN);
}
static int max30102_read_temp(struct max30102_data *data, int *val)
{
int ret;
unsigned int reg;
ret = regmap_read(data->regmap, MAX30102_REG_TEMP_INTEGER, &reg);
if (ret < 0)
return ret;
*val = reg << 4;
ret = regmap_read(data->regmap, MAX30102_REG_TEMP_FRACTION, &reg);
if (ret < 0)
return ret;
*val |= reg & 0xf;
*val = sign_extend32(*val, 11);
return 0;
}
static int max30102_get_temp(struct max30102_data *data, int *val, bool en)
{
int ret;
if (en) {
ret = max30102_set_power(data, true);
if (ret)
return ret;
}
/* start acquisition */
ret = regmap_update_bits(data->regmap, MAX30102_REG_TEMP_CONFIG,
MAX30102_REG_TEMP_CONFIG_TEMP_EN,
MAX30102_REG_TEMP_CONFIG_TEMP_EN);
if (ret)
goto out;
msleep(35);
ret = max30102_read_temp(data, val);
out:
if (en)
max30102_set_power(data, false);
return ret;
}
static int max30102_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct max30102_data *data = iio_priv(indio_dev);
int ret = -EINVAL;
switch (mask) {
case IIO_CHAN_INFO_RAW:
/*
* Temperature reading can only be acquired when not in
* shutdown; leave shutdown briefly when buffer not running
*/
mutex_lock(&indio_dev->mlock);
if (!iio_buffer_enabled(indio_dev))
ret = max30102_get_temp(data, val, true);
else
ret = max30102_get_temp(data, val, false);
mutex_unlock(&indio_dev->mlock);
if (ret)
return ret;
ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
*val = 1000; /* 62.5 */
*val2 = 16;
ret = IIO_VAL_FRACTIONAL;
break;
}
return ret;
}
static const struct iio_info max30102_info = {
.read_raw = max30102_read_raw,
};
static int max30102_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max30102_data *data;
struct iio_dev *indio_dev;
int ret;
unsigned int reg;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
indio_dev->name = MAX30102_DRV_NAME;
indio_dev->info = &max30102_info;
indio_dev->modes = INDIO_DIRECT_MODE;
data = iio_priv(indio_dev);
data->indio_dev = indio_dev;
data->client = client;
data->chip_id = id->driver_data;
mutex_init(&data->lock);
i2c_set_clientdata(client, indio_dev);
switch (data->chip_id) {
case max30105:
indio_dev->channels = max30105_channels;
indio_dev->num_channels = ARRAY_SIZE(max30105_channels);
indio_dev->available_scan_masks = max30105_scan_masks;
break;
case max30102:
indio_dev->channels = max30102_channels;
indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
indio_dev->available_scan_masks = max30102_scan_masks;
break;
default:
return -ENODEV;
}
ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
INDIO_BUFFER_SOFTWARE,
&max30102_buffer_setup_ops);
if (ret)
return ret;
data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
return PTR_ERR(data->regmap);
}
/* check part ID */
ret = regmap_read(data->regmap, MAX30102_REG_PART_ID, &reg);
if (ret)
return ret;
if (reg != MAX30102_PART_NUMBER)
return -ENODEV;
/* show revision ID */
ret = regmap_read(data->regmap, MAX30102_REG_REV_ID, &reg);
if (ret)
return ret;
dev_dbg(&client->dev, "max3010x revision %02x\n", reg);
/* clear mode setting, chip shutdown */
ret = max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
false);
if (ret)
return ret;
ret = max30102_chip_init(data);
if (ret)
return ret;
if (client->irq <= 0) {
dev_err(&client->dev, "no valid irq defined\n");
return -EINVAL;
}
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, max30102_interrupt_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"max30102_irq", indio_dev);
if (ret) {
dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
return ret;
}
return iio_device_register(indio_dev);
}
static int max30102_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct max30102_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
max30102_set_power(data, false);
return 0;
}
static const struct i2c_device_id max30102_id[] = {
{ "max30102", max30102 },
{ "max30105", max30105 },
{}
};
MODULE_DEVICE_TABLE(i2c, max30102_id);
static const struct of_device_id max30102_dt_ids[] = {
{ .compatible = "maxim,max30102" },
{ .compatible = "maxim,max30105" },
{ }
};
MODULE_DEVICE_TABLE(of, max30102_dt_ids);
static struct i2c_driver max30102_driver = {
.driver = {
.name = MAX30102_DRV_NAME,
.of_match_table = max30102_dt_ids,
},
.probe = max30102_probe,
.remove = max30102_remove,
.id_table = max30102_id,
};
module_i2c_driver(max30102_driver);
MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink