mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
2bad7f862e
The usual chunk of DT changes, most notably:
- Support for the H2+ and the V3s
- CPUFreq support for the A33
- SPDIF support for the A31 and H3
- New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
Orange Pi Zero
-----BEGIN PGP SIGNATURE-----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=ig5Q
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Pull "Allwinner DT changes for 4.11" from Maxime Ripard:
The usual chunk of DT changes, most notably:
- Support for the H2+ and the V3s
- CPUFreq support for the A33
- SPDIF support for the A31 and H3
- New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
Orange Pi Zero
* tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (42 commits)
ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
ARM: dts: sun8i-h3: Add the SPDIF block to the H3
ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB
ARM: sun8i: sina33: Enable display
ARM: sun8i: a23/a33: Add the oscillators accuracy
ARM: sun8i: a23/a33: Enable the real LOSC and use it
ARM: dts: sunxi: add support for Lichee Pi Zero board
ARM: dts: sunxi: add dtsi file for V3s SoC
ARM: dts: sun6i: sina31s: Enable USB OTG controller in peripheral mode
ARM: dts: sun8i: reference-design: use AXP223 DTSI
ARM: dts: sun8i: parrot: use AXP223 DTSI
ARM: dts: sun8i: sina33: use AXP223 DTSI
ARM: dts: sun8i: a33-olinuxino: use AXP223 DTSI
ARM: dts: add DTSI for AXP223
dt-bindings: power: axp20x-usb: add axp223 compatible
ARM: dts: sun7i: Add wifi dt node on Banana Pro
ARM: dts: sun6i: Add SPDIF to the Mele I7
devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software
ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec
...
649 lines
17 KiB
Plaintext
649 lines
17 KiB
Plaintext
/*
|
|
* Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/clock/sun8i-h3-ccu.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
#include <dt-bindings/reset/sun8i-h3-ccu.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
|
|
cpu@2 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
};
|
|
|
|
cpu@3 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
osc24M: osc24M_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: osc32k_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
apb0: apb0_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "apb0";
|
|
};
|
|
|
|
apb0_gates: clk@01f01428 {
|
|
compatible = "allwinner,sun8i-h3-apb0-gates-clk",
|
|
"allwinner,sun4i-a10-gates-clk";
|
|
reg = <0x01f01428 0x4>;
|
|
#clock-cells = <1>;
|
|
clocks = <&apb0>;
|
|
clock-indices = <0>, <1>;
|
|
clock-output-names = "apb0_pio", "apb0_ir";
|
|
};
|
|
|
|
ir_clk: ir_clk@01f01454 {
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01f01454 0x4>;
|
|
#clock-cells = <0>;
|
|
clocks = <&osc32k>, <&osc24M>;
|
|
clock-output-names = "ir";
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dma: dma-controller@01c02000 {
|
|
compatible = "allwinner,sun8i-h3-dma";
|
|
reg = <0x01c02000 0x1000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_DMA>;
|
|
resets = <&ccu RST_BUS_DMA>;
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
mmc0: mmc@01c0f000 {
|
|
compatible = "allwinner,sun7i-a20-mmc";
|
|
reg = <0x01c0f000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC0>,
|
|
<&ccu CLK_MMC0>,
|
|
<&ccu CLK_MMC0_OUTPUT>,
|
|
<&ccu CLK_MMC0_SAMPLE>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
resets = <&ccu RST_BUS_MMC0>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc1: mmc@01c10000 {
|
|
compatible = "allwinner,sun7i-a20-mmc";
|
|
reg = <0x01c10000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC1>,
|
|
<&ccu CLK_MMC1>,
|
|
<&ccu CLK_MMC1_OUTPUT>,
|
|
<&ccu CLK_MMC1_SAMPLE>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
resets = <&ccu RST_BUS_MMC1>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc2: mmc@01c11000 {
|
|
compatible = "allwinner,sun7i-a20-mmc";
|
|
reg = <0x01c11000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC2>,
|
|
<&ccu CLK_MMC2>,
|
|
<&ccu CLK_MMC2_OUTPUT>,
|
|
<&ccu CLK_MMC2_SAMPLE>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
resets = <&ccu RST_BUS_MMC2>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
usbphy: phy@01c19400 {
|
|
compatible = "allwinner,sun8i-h3-usb-phy";
|
|
reg = <0x01c19400 0x2c>,
|
|
<0x01c1a800 0x4>,
|
|
<0x01c1b800 0x4>,
|
|
<0x01c1c800 0x4>,
|
|
<0x01c1d800 0x4>;
|
|
reg-names = "phy_ctrl",
|
|
"pmu0",
|
|
"pmu1",
|
|
"pmu2",
|
|
"pmu3";
|
|
clocks = <&ccu CLK_USB_PHY0>,
|
|
<&ccu CLK_USB_PHY1>,
|
|
<&ccu CLK_USB_PHY2>,
|
|
<&ccu CLK_USB_PHY3>;
|
|
clock-names = "usb0_phy",
|
|
"usb1_phy",
|
|
"usb2_phy",
|
|
"usb3_phy";
|
|
resets = <&ccu RST_USB_PHY0>,
|
|
<&ccu RST_USB_PHY1>,
|
|
<&ccu RST_USB_PHY2>,
|
|
<&ccu RST_USB_PHY3>;
|
|
reset-names = "usb0_reset",
|
|
"usb1_reset",
|
|
"usb2_reset",
|
|
"usb3_reset";
|
|
status = "disabled";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
ehci1: usb@01c1b000 {
|
|
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
|
|
reg = <0x01c1b000 0x100>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
|
|
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci1: usb@01c1b400 {
|
|
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
|
|
reg = <0x01c1b400 0x100>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
|
|
<&ccu CLK_USB_OHCI1>;
|
|
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci2: usb@01c1c000 {
|
|
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
|
|
reg = <0x01c1c000 0x100>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
|
|
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
|
|
phys = <&usbphy 2>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci2: usb@01c1c400 {
|
|
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
|
|
reg = <0x01c1c400 0x100>;
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
|
|
<&ccu CLK_USB_OHCI2>;
|
|
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
|
|
phys = <&usbphy 2>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci3: usb@01c1d000 {
|
|
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
|
|
reg = <0x01c1d000 0x100>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
|
|
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
|
|
phys = <&usbphy 3>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci3: usb@01c1d400 {
|
|
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
|
|
reg = <0x01c1d400 0x100>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
|
|
<&ccu CLK_USB_OHCI3>;
|
|
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
|
|
phys = <&usbphy 3>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ccu: clock@01c20000 {
|
|
compatible = "allwinner,sun8i-h3-ccu";
|
|
reg = <0x01c20000 0x400>;
|
|
clocks = <&osc24M>, <&osc32k>;
|
|
clock-names = "hosc", "losc";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pio: pinctrl@01c20800 {
|
|
compatible = "allwinner,sun8i-h3-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
|
|
clock-names = "apb", "hosc", "losc";
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
i2c0_pins: i2c0 {
|
|
pins = "PA11", "PA12";
|
|
function = "i2c0";
|
|
};
|
|
|
|
i2c1_pins: i2c1 {
|
|
pins = "PA18", "PA19";
|
|
function = "i2c1";
|
|
};
|
|
|
|
i2c2_pins: i2c2 {
|
|
pins = "PE12", "PE13";
|
|
function = "i2c2";
|
|
};
|
|
|
|
mmc0_pins_a: mmc0@0 {
|
|
pins = "PF0", "PF1", "PF2", "PF3",
|
|
"PF4", "PF5";
|
|
function = "mmc0";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc0_cd_pin: mmc0_cd_pin@0 {
|
|
pins = "PF6";
|
|
function = "gpio_in";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc1_pins_a: mmc1@0 {
|
|
pins = "PG0", "PG1", "PG2", "PG3",
|
|
"PG4", "PG5";
|
|
function = "mmc1";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc2_8bit_pins: mmc2_8bit {
|
|
pins = "PC5", "PC6", "PC8",
|
|
"PC9", "PC10", "PC11",
|
|
"PC12", "PC13", "PC14",
|
|
"PC15", "PC16";
|
|
function = "mmc2";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
spdif_tx_pins_a: spdif@0 {
|
|
pins = "PA17";
|
|
function = "spdif";
|
|
};
|
|
|
|
spi0_pins: spi0 {
|
|
pins = "PC0", "PC1", "PC2", "PC3";
|
|
function = "spi0";
|
|
};
|
|
|
|
spi1_pins: spi1 {
|
|
pins = "PA15", "PA16", "PA14", "PA13";
|
|
function = "spi1";
|
|
};
|
|
|
|
uart0_pins_a: uart0@0 {
|
|
pins = "PA4", "PA5";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pins: uart1 {
|
|
pins = "PG6", "PG7";
|
|
function = "uart1";
|
|
};
|
|
|
|
uart1_rts_cts_pins: uart1_rts_cts {
|
|
pins = "PG8", "PG9";
|
|
function = "uart1";
|
|
};
|
|
|
|
uart2_pins: uart2 {
|
|
pins = "PA0", "PA1";
|
|
function = "uart2";
|
|
};
|
|
|
|
uart3_pins: uart3 {
|
|
pins = "PA13", "PA14";
|
|
function = "uart3";
|
|
};
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-a10-timer";
|
|
reg = <0x01c20c00 0xa0>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
spi0: spi@01c68000 {
|
|
compatible = "allwinner,sun8i-h3-spi";
|
|
reg = <0x01c68000 0x1000>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 23>, <&dma 23>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
resets = <&ccu RST_BUS_SPI0>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@01c69000 {
|
|
compatible = "allwinner,sun8i-h3-spi";
|
|
reg = <0x01c69000 0x1000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 24>, <&dma 24>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_pins>;
|
|
resets = <&ccu RST_BUS_SPI1>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
wdt0: watchdog@01c20ca0 {
|
|
compatible = "allwinner,sun6i-a31-wdt";
|
|
reg = <0x01c20ca0 0x20>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
spdif: spdif@01c21000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun8i-h3-spdif";
|
|
reg = <0x01c21000 0x400>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
|
|
resets = <&ccu RST_BUS_SPDIF>;
|
|
clock-names = "apb", "spdif";
|
|
dmas = <&dma 2>;
|
|
dma-names = "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@01c21400 {
|
|
compatible = "allwinner,sun8i-h3-pwm";
|
|
reg = <0x01c21400 0x8>;
|
|
clocks = <&osc24M>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
codec: codec@01c22c00 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun8i-h3-codec";
|
|
reg = <0x01c22c00 0x400>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
|
|
clock-names = "apb", "codec";
|
|
resets = <&ccu RST_BUS_CODEC>;
|
|
dmas = <&dma 15>, <&dma 15>;
|
|
dma-names = "rx", "tx";
|
|
allwinner,codec-analog-controls = <&codec_analog>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART0>;
|
|
resets = <&ccu RST_BUS_UART0>;
|
|
dmas = <&dma 6>, <&dma 6>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART1>;
|
|
resets = <&ccu RST_BUS_UART1>;
|
|
dmas = <&dma 7>, <&dma 7>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@01c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART2>;
|
|
resets = <&ccu RST_BUS_UART2>;
|
|
dmas = <&dma 8>, <&dma 8>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART3>;
|
|
resets = <&ccu RST_BUS_UART3>;
|
|
dmas = <&dma 9>, <&dma 9>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@01c2ac00 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C0>;
|
|
resets = <&ccu RST_BUS_I2C0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@01c2b000 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C1>;
|
|
resets = <&ccu RST_BUS_I2C1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@01c2b400 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C2>;
|
|
resets = <&ccu RST_BUS_I2C2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gic: interrupt-controller@01c81000 {
|
|
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
|
|
reg = <0x01c81000 0x1000>,
|
|
<0x01c82000 0x2000>,
|
|
<0x01c84000 0x2000>,
|
|
<0x01c86000 0x2000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
rtc: rtc@01f00000 {
|
|
compatible = "allwinner,sun6i-a31-rtc";
|
|
reg = <0x01f00000 0x54>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
apb0_reset: reset@01f014b0 {
|
|
reg = <0x01f014b0 0x4>;
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
codec_analog: codec-analog@01f015c0 {
|
|
compatible = "allwinner,sun8i-h3-codec-analog";
|
|
reg = <0x01f015c0 0x4>;
|
|
};
|
|
|
|
ir: ir@01f02000 {
|
|
compatible = "allwinner,sun5i-a13-ir";
|
|
clocks = <&apb0_gates 1>, <&ir_clk>;
|
|
clock-names = "apb", "ir";
|
|
resets = <&apb0_reset 1>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x01f02000 0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
r_pio: pinctrl@01f02c00 {
|
|
compatible = "allwinner,sun8i-h3-r-pinctrl";
|
|
reg = <0x01f02c00 0x400>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
|
|
clock-names = "apb", "hosc", "losc";
|
|
resets = <&apb0_reset 0>;
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
ir_pins_a: ir@0 {
|
|
pins = "PL11";
|
|
function = "s_cir_rx";
|
|
};
|
|
};
|
|
};
|
|
};
|