korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 00:34:20 +08:00
Code Issues Packages Projects Releases Wiki Activity
27c1bb20d4
linux/arch/arm/mach-shmobile/board-koelsch.c
Linus Torvalds 2d65a9f48f Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 
Pull drm updates from Dave Airlie:
 "This is the main git pull for the drm,

  I pretty much froze major pulls at -rc5/6 time, and haven't had much
  fallout, so will probably continue doing that.

  Lots of changes all over, big internal header cleanup to make it clear
  drm features are legacy things and what are things that modern KMS
  drivers should be using.  Also big move to use the new generic fences
  in all the TTM drivers.

  core:
        atomic prep work,
        vblank rework changes, allows immediate vblank disables
        major header reworking and cleanups to better delinate legacy
        interfaces from what KMS drivers should be using.
        cursor planes locking fixes

  ttm:
        move to generic fences (affects all TTM drivers)
        ppc64 caching fixes

  radeon:
        userptr support,
        uvd for old asics,
        reset rework for fence changes
        better buffer placement changes,
        dpm feature enablement
        hdmi audio support fixes

  intel:
        Cherryview work,
        180 degree rotation,
        skylake prep work,
        execlist command submission
        full ppgtt prep work
        cursor improvements
        edid caching,
        vdd handling improvements

  nouveau:
        fence reworking
        kepler memory clock work
        gt21x clock work
        fan control improvements
        hdmi infoframe fixes
        DP audio

  ast:
        ppc64 fixes
        caching fix

  rcar:
        rcar-du DT support

  ipuv3:
        prep work for capture support

  msm:
        LVDS support for mdp4, new panel, gpu refactoring

  exynos:
        exynos3250 SoC support, drop bad mmap interface,
        mipi dsi changes, and component match support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits)
  drm/mst: rework payload table allocation to conform better.
  drm/ast: Fix HW cursor image
  drm/radeon/kv: add uvd/vce info to dpm debugfs output
  drm/radeon/ci: add uvd/vce info to dpm debugfs output
  drm/radeon: export reservation_object from dmabuf to ttm
  drm/radeon: cope with foreign fences inside the reservation object
  drm/radeon: cope with foreign fences inside display
  drm/core: use helper to check driver features
  drm/radeon/cik: write gfx ucode version to ucode addr reg
  drm/radeon/si: print full CS when we hit a packet 0
  drm/radeon: remove unecessary includes
  drm/radeon/combios: declare legacy_connector_convert as static
  drm/radeon/atombios: declare connector convert tables as static
  drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table
  drm/radeon/dpm: drop clk/voltage dependency filters for BTC
  drm/radeon/dpm: drop clk/voltage dependency filters for CI
  drm/radeon/dpm: drop clk/voltage dependency filters for SI
  drm/radeon/dpm: drop clk/voltage dependency filters for NI
  drm/radeon: disable audio when we disable hdmi (v2)
  drm/radeon: split audio enable between eg and r600 (v2)
  ...
2014-10-14 09:39:08 +02:00

528 lines
16 KiB
C
Raw Blame History

/*
* Koelsch board support
*
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
* Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/phy.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/rcar-du.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
#include "irqs.h"
#include "r8a7791.h"
#include "rcar-gen2.h"
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
{
.type = RCAR_DU_ENCODER_NONE,
.output = RCAR_DU_OUTPUT_LVDS0,
.connector.lvds.panel = {
.width_mm = 210,
.height_mm = 158,
.mode = {
.pixelclock = 65000000,
.hactive = 1024,
.hfront_porch = 20,
.hback_porch = 160,
.hsync_len = 136,
.vactive = 768,
.vfront_porch = 3,
.vback_porch = 29,
.vsync_len = 6,
},
},
},
};
static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {
.encoders = koelsch_du_encoders,
.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
};
static const struct resource du_resources[] __initconst = {
DEFINE_RES_MEM(0xfeb00000, 0x40000),
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
DEFINE_RES_IRQ(gic_spi(256)),
DEFINE_RES_IRQ(gic_spi(268)),
};
static void __init koelsch_add_du_device(void)
{
struct platform_device_info info = {
.name = "rcar-du-r8a7791",
.id = -1,
.res = du_resources,
.num_res = ARRAY_SIZE(du_resources),
.data = &koelsch_du_pdata,
.size_data = sizeof(koelsch_du_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&info);
}
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x1,
.phy_irq = irq_pin(0),
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
static const struct resource ether_resources[] __initconst = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
static const struct platform_device_info ether_info __initconst = {
.name = "r8a7791-ether",
.id = -1,
.res = ether_resources,
.num_res = ARRAY_SIZE(ether_resources),
.data = &ether_pdata,
.size_data = sizeof(ether_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
/* LEDS */
static struct gpio_led koelsch_leds[] = {
{
.name = "led8",
.gpio = RCAR_GP_PIN(2, 21),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led7",
.gpio = RCAR_GP_PIN(2, 20),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led6",
.gpio = RCAR_GP_PIN(2, 19),
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static const struct gpio_led_platform_data koelsch_leds_pdata __initconst = {
.leds = koelsch_leds,
.num_leds = ARRAY_SIZE(koelsch_leds),
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
.wakeup = 1, .debounce_interval = 20 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_4, RCAR_GP_PIN(5, 3), "SW2-pin4"),
GPIO_KEY(KEY_3, RCAR_GP_PIN(5, 2), "SW2-pin3"),
GPIO_KEY(KEY_2, RCAR_GP_PIN(5, 1), "SW2-pin2"),
GPIO_KEY(KEY_1, RCAR_GP_PIN(5, 0), "SW2-pin1"),
GPIO_KEY(KEY_G, RCAR_GP_PIN(7, 6), "SW36"),
GPIO_KEY(KEY_F, RCAR_GP_PIN(7, 5), "SW35"),
GPIO_KEY(KEY_E, RCAR_GP_PIN(7, 4), "SW34"),
GPIO_KEY(KEY_D, RCAR_GP_PIN(7, 3), "SW33"),
GPIO_KEY(KEY_C, RCAR_GP_PIN(7, 2), "SW32"),
GPIO_KEY(KEY_B, RCAR_GP_PIN(7, 1), "SW31"),
GPIO_KEY(KEY_A, RCAR_GP_PIN(7, 0), "SW30"),
};
static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
/* QSPI */
static const struct resource qspi_resources[] __initconst = {
DEFINE_RES_MEM(0xe6b10000, 0x1000),
DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
};
static const struct rspi_plat_data qspi_pdata __initconst = {
.num_chipselect = 1,
};
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
static struct mtd_partition spi_flash_part[] = {
{
.name = "loader",
.offset = 0x00000000,
.size = 512 * 1024,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "bootenv",
.offset = MTDPART_OFS_APPEND,
.size = 512 * 1024,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "data",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static const struct flash_platform_data spi_flash_data = {
.name = "m25p80",
.parts = spi_flash_part,
.nr_parts = ARRAY_SIZE(spi_flash_part),
.type = "s25fl512s",
};
static const struct spi_board_info spi_info[] __initconst = {
{
.modalias = "m25p80",
.platform_data = &spi_flash_data,
.mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
.max_speed_hz = 30000000,
.bus_num = 0,
.chip_select = 0,
},
};
/* SATA0 */
static const struct resource sata0_resources[] __initconst = {
DEFINE_RES_MEM(0xee300000, 0x2000),
DEFINE_RES_IRQ(gic_spi(105)),
};
static const struct platform_device_info sata0_info __initconst = {
.name = "sata-r8a7791",
.id = 0,
.res = sata0_resources,
.num_res = ARRAY_SIZE(sata0_resources),
.dma_mask = DMA_BIT_MASK(32),
};
/* I2C */
static const struct resource i2c_resources[] __initconst = {
/* I2C0 */
DEFINE_RES_MEM(0xE6508000, 0x40),
DEFINE_RES_IRQ(gic_spi(287)),
/* I2C1 */
DEFINE_RES_MEM(0xE6518000, 0x40),
DEFINE_RES_IRQ(gic_spi(288)),
/* I2C2 */
DEFINE_RES_MEM(0xE6530000, 0x40),
DEFINE_RES_IRQ(gic_spi(286)),
/* I2C3 */
DEFINE_RES_MEM(0xE6540000, 0x40),
DEFINE_RES_IRQ(gic_spi(290)),
/* I2C4 */
DEFINE_RES_MEM(0xE6520000, 0x40),
DEFINE_RES_IRQ(gic_spi(19)),
/* I2C5 */
DEFINE_RES_MEM(0xE6528000, 0x40),
DEFINE_RES_IRQ(gic_spi(20)),
};
static void __init koelsch_add_i2c(unsigned idx)
{
unsigned res_idx = idx * 2;
BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));
platform_device_register_simple("i2c-rcar_gen2", idx,
i2c_resources + res_idx, 2);
}
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
.supply_name = "SDHI" #idx "Vcc", \
.microvolts = 3300000, \
.gpio = vdd_pin, \
.enable_high = 1, \
.init_data = &vcc_sdhi##idx##_init_data, \
}; \
\
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
.constraints = { \
.input_uV = 3300000, \
.min_uV = 1800000, \
.max_uV = 3300000, \
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static struct gpio vccq_sdhi##idx##_gpio = \
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
\
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
{ .value = 1800000, .gpios = 0 }, \
{ .value = 3300000, .gpios = 1 }, \
}; \
\
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
.supply_name = "vqmmc", \
.gpios = &vccq_sdhi##idx##_gpio, \
.nr_gpios = 1, \
.states = vccq_sdhi##idx##_states, \
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
.type = REGULATOR_VOLTAGE, \
.init_data = &vccq_sdhi##idx##_init_data, \
};
SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12));
SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13));
SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
};
static struct resource sdhi0_resources[] __initdata = {
DEFINE_RES_MEM(0xee100000, 0x200),
DEFINE_RES_IRQ(gic_spi(165)),
};
/* SDHI1 */
static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
};
static struct resource sdhi1_resources[] __initdata = {
DEFINE_RES_MEM(0xee140000, 0x100),
DEFINE_RES_IRQ(gic_spi(167)),
};
/* SDHI2 */
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi2_resources[] __initdata = {
DEFINE_RES_MEM(0xee160000, 0x100),
DEFINE_RES_IRQ(gic_spi(168)),
};
static const struct pinctrl_map koelsch_pinctrl_map[] = {
/* DU */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
"du_rgb666", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
"du_sync", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
"du_clk_out_0", "du"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"eth_link", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"eth_mdio", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"eth_rmii", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"intc_irq0", "intc"),
/* QSPI */
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
"qspi_ctrl", "qspi"),
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
"qspi_data4", "qspi"),
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
"scif0_data_d", "scif0"),
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
"scif1_data_d", "scif1"),
/* I2C1 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",
"i2c1_e", "i2c1"),
/* I2C2 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",
"i2c2", "i2c2"),
/* I2C4 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
"i2c4_c", "i2c4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
"sdhi0_wp", "sdhi0"),
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
"sdhi1_ctrl", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
"sdhi1_cd", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
"sdhi1_wp", "sdhi1"),
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
"sdhi2_data4", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
"sdhi2_ctrl", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
"sdhi2_cd", "sdhi2"),
};
static void __init koelsch_add_standard_devices(void)
{
r8a7791_clock_init();
pinctrl_register_mappings(koelsch_pinctrl_map,
ARRAY_SIZE(koelsch_pinctrl_map));
r8a7791_pinmux_init();
r8a7791_add_standard_devices();
platform_device_register_full(&ether_info);
platform_device_register_data(NULL, "leds-gpio", -1,
&koelsch_leds_pdata,
sizeof(koelsch_leds_pdata));
platform_device_register_data(NULL, "gpio-keys", -1,
&koelsch_keys_pdata,
sizeof(koelsch_keys_pdata));
platform_device_register_resndata(NULL, "qspi", 0,
qspi_resources,
ARRAY_SIZE(qspi_resources),
&qspi_pdata, sizeof(qspi_pdata));
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
koelsch_add_du_device();
platform_device_register_full(&sata0_info);
koelsch_add_i2c(1);
koelsch_add_i2c(2);
koelsch_add_i2c(4);
koelsch_add_i2c(5);
platform_device_register_data(NULL, "reg-fixed-voltage", 0,
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(NULL, "reg-fixed-voltage", 1,
&vcc_sdhi1_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(NULL, "reg-fixed-voltage", 2,
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(NULL, "gpio-regulator", 0,
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
platform_device_register_data(NULL, "gpio-regulator", 1,
&vccq_sdhi1_info, sizeof(struct gpio_regulator_config));
platform_device_register_data(NULL, "gpio-regulator", 2,
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1,
sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
&sdhi1_info, sizeof(struct sh_mobile_sdhi_info));
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2,
sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
&sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
}
/*
* Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
* 14-15. We have to set them back to 01 from the default 00 value each time
* the PHY is reset. It's also important because the PHY's LED0 signal is
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
* bounce on and off after each packet, which we apparently want to avoid.
*/
static int koelsch_ksz8041_fixup(struct phy_device *phydev)
{
u16 phyctrl1 = phy_read(phydev, 0x1e);
phyctrl1 &= ~0xc000;
phyctrl1 |= 0x4000;
return phy_write(phydev, 0x1e, phyctrl1);
}
static void __init koelsch_init(void)
{
koelsch_add_standard_devices();
irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_id("r8a7791-ether-ff:01",
koelsch_ksz8041_fixup);
}
static const char * const koelsch_boards_compat_dt[] __initconst = {
"renesas,koelsch",
NULL,
};
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_init,
.init_late = shmobile_init_late,
.reserve = rcar_gen2_reserve,
.dt_compat = koelsch_boards_compat_dt,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink