mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
39266b642c
All functions except rz_mtu3_count_enable_write(), call pm_runtime_{get,put} inside the lock. For consistency do the same here. Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/r/ZH8Fmom8vZ4DwxqA@duo.ucw.cz Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230725154611.227556-1-biju.das.jz@bp.renesas.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
907 lines
24 KiB
C
907 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Renesas RZ/G2L MTU3a Counter driver
|
|
*
|
|
* Copyright (C) 2022 Renesas Electronics Corporation
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/counter.h>
|
|
#include <linux/mfd/rz-mtu3.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/types.h>
|
|
|
|
/*
|
|
* Register descriptions
|
|
* TSR: Timer Status Register
|
|
* TMDR1: Timer Mode Register 1
|
|
* TMDR3: Timer Mode Register 3
|
|
* TIOR: Timer I/O Control Register
|
|
* TCR: Timer Control Register
|
|
* TCNT: Timer Counter
|
|
* TGRA: Timer general register A
|
|
* TCNTLW: Timer Longword Counter
|
|
* TGRALW: Timer longword general register A
|
|
*/
|
|
|
|
#define RZ_MTU3_TSR_TCFD BIT(7) /* Count Direction Flag */
|
|
|
|
#define RZ_MTU3_TMDR1_PH_CNT_MODE_1 (4) /* Phase counting mode 1 */
|
|
#define RZ_MTU3_TMDR1_PH_CNT_MODE_2 (5) /* Phase counting mode 2 */
|
|
#define RZ_MTU3_TMDR1_PH_CNT_MODE_3 (6) /* Phase counting mode 3 */
|
|
#define RZ_MTU3_TMDR1_PH_CNT_MODE_4 (7) /* Phase counting mode 4 */
|
|
#define RZ_MTU3_TMDR1_PH_CNT_MODE_5 (9) /* Phase counting mode 5 */
|
|
#define RZ_MTU3_TMDR1_PH_CNT_MODE_MASK (0xf)
|
|
|
|
/*
|
|
* LWA: MTU1/MTU2 Combination Longword Access Control
|
|
* 0: 16-bit, 1: 32-bit
|
|
*/
|
|
#define RZ_MTU3_TMDR3_LWA (0)
|
|
|
|
/*
|
|
* PHCKSEL: External Input Phase Clock Select
|
|
* 0: MTCLKA and MTCLKB, 1: MTCLKC and MTCLKD
|
|
*/
|
|
#define RZ_MTU3_TMDR3_PHCKSEL (1)
|
|
|
|
#define RZ_MTU3_16_BIT_MTU1_CH (0)
|
|
#define RZ_MTU3_16_BIT_MTU2_CH (1)
|
|
#define RZ_MTU3_32_BIT_CH (2)
|
|
|
|
#define RZ_MTU3_TIOR_NO_OUTPUT (0) /* Output prohibited */
|
|
#define RZ_MTU3_TIOR_IC_BOTH (10) /* Input capture at both edges */
|
|
|
|
#define SIGNAL_A_ID (0)
|
|
#define SIGNAL_B_ID (1)
|
|
#define SIGNAL_C_ID (2)
|
|
#define SIGNAL_D_ID (3)
|
|
|
|
#define RZ_MTU3_MAX_HW_CNTR_CHANNELS (2)
|
|
#define RZ_MTU3_MAX_LOGICAL_CNTR_CHANNELS (3)
|
|
|
|
/**
|
|
* struct rz_mtu3_cnt - MTU3 counter private data
|
|
*
|
|
* @clk: MTU3 module clock
|
|
* @lock: Lock to prevent concurrent access for ceiling and count
|
|
* @ch: HW channels for the counters
|
|
* @count_is_enabled: Enabled state of Counter value channel
|
|
* @mtu_16bit_max: Cache for 16-bit counters
|
|
* @mtu_32bit_max: Cache for 32-bit counters
|
|
*/
|
|
struct rz_mtu3_cnt {
|
|
struct clk *clk;
|
|
struct mutex lock;
|
|
struct rz_mtu3_channel *ch;
|
|
bool count_is_enabled[RZ_MTU3_MAX_LOGICAL_CNTR_CHANNELS];
|
|
union {
|
|
u16 mtu_16bit_max[RZ_MTU3_MAX_HW_CNTR_CHANNELS];
|
|
u32 mtu_32bit_max;
|
|
};
|
|
};
|
|
|
|
static const enum counter_function rz_mtu3_count_functions[] = {
|
|
COUNTER_FUNCTION_QUADRATURE_X4,
|
|
COUNTER_FUNCTION_PULSE_DIRECTION,
|
|
COUNTER_FUNCTION_QUADRATURE_X2_B,
|
|
};
|
|
|
|
static inline size_t rz_mtu3_get_hw_ch(const size_t id)
|
|
{
|
|
return (id == RZ_MTU3_32_BIT_CH) ? 0 : id;
|
|
}
|
|
|
|
static inline struct rz_mtu3_channel *rz_mtu3_get_ch(struct counter_device *counter, int id)
|
|
{
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
const size_t ch_id = rz_mtu3_get_hw_ch(id);
|
|
|
|
return &priv->ch[ch_id];
|
|
}
|
|
|
|
static bool rz_mtu3_is_counter_invalid(struct counter_device *counter, int id)
|
|
{
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
unsigned long tmdr;
|
|
|
|
pm_runtime_get_sync(priv->ch->dev);
|
|
tmdr = rz_mtu3_shared_reg_read(priv->ch, RZ_MTU3_TMDR3);
|
|
pm_runtime_put(priv->ch->dev);
|
|
|
|
if (id == RZ_MTU3_32_BIT_CH && test_bit(RZ_MTU3_TMDR3_LWA, &tmdr))
|
|
return false;
|
|
|
|
if (id != RZ_MTU3_32_BIT_CH && !test_bit(RZ_MTU3_TMDR3_LWA, &tmdr))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int rz_mtu3_lock_if_counter_is_valid(struct counter_device *counter,
|
|
struct rz_mtu3_channel *const ch,
|
|
struct rz_mtu3_cnt *const priv,
|
|
int id)
|
|
{
|
|
mutex_lock(&priv->lock);
|
|
|
|
if (ch->is_busy && !priv->count_is_enabled[id]) {
|
|
mutex_unlock(&priv->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rz_mtu3_is_counter_invalid(counter, id)) {
|
|
mutex_unlock(&priv->lock);
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_lock_if_count_is_enabled(struct rz_mtu3_channel *const ch,
|
|
struct rz_mtu3_cnt *const priv,
|
|
int id)
|
|
{
|
|
mutex_lock(&priv->lock);
|
|
|
|
if (ch->is_busy && !priv->count_is_enabled[id]) {
|
|
mutex_unlock(&priv->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_count_read(struct counter_device *counter,
|
|
struct counter_count *count, u64 *val)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_counter_is_valid(counter, ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_sync(ch->dev);
|
|
if (count->id == RZ_MTU3_32_BIT_CH)
|
|
*val = rz_mtu3_32bit_ch_read(ch, RZ_MTU3_TCNTLW);
|
|
else
|
|
*val = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TCNT);
|
|
pm_runtime_put(ch->dev);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_count_write(struct counter_device *counter,
|
|
struct counter_count *count, const u64 val)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_counter_is_valid(counter, ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_sync(ch->dev);
|
|
if (count->id == RZ_MTU3_32_BIT_CH)
|
|
rz_mtu3_32bit_ch_write(ch, RZ_MTU3_TCNTLW, val);
|
|
else
|
|
rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TCNT, val);
|
|
pm_runtime_put(ch->dev);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_count_function_read_helper(struct rz_mtu3_channel *const ch,
|
|
struct rz_mtu3_cnt *const priv,
|
|
enum counter_function *function)
|
|
{
|
|
u8 timer_mode;
|
|
|
|
pm_runtime_get_sync(ch->dev);
|
|
timer_mode = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TMDR1);
|
|
pm_runtime_put(ch->dev);
|
|
|
|
switch (timer_mode & RZ_MTU3_TMDR1_PH_CNT_MODE_MASK) {
|
|
case RZ_MTU3_TMDR1_PH_CNT_MODE_1:
|
|
*function = COUNTER_FUNCTION_QUADRATURE_X4;
|
|
return 0;
|
|
case RZ_MTU3_TMDR1_PH_CNT_MODE_2:
|
|
*function = COUNTER_FUNCTION_PULSE_DIRECTION;
|
|
return 0;
|
|
case RZ_MTU3_TMDR1_PH_CNT_MODE_4:
|
|
*function = COUNTER_FUNCTION_QUADRATURE_X2_B;
|
|
return 0;
|
|
default:
|
|
/*
|
|
* TODO:
|
|
* - need to add RZ_MTU3_TMDR1_PH_CNT_MODE_3
|
|
* - need to add RZ_MTU3_TMDR1_PH_CNT_MODE_5
|
|
*/
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int rz_mtu3_count_function_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
enum counter_function *function)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_count_is_enabled(ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rz_mtu3_count_function_read_helper(ch, priv, function);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rz_mtu3_count_function_write(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
enum counter_function function)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
u8 timer_mode;
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_count_is_enabled(ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (function) {
|
|
case COUNTER_FUNCTION_QUADRATURE_X4:
|
|
timer_mode = RZ_MTU3_TMDR1_PH_CNT_MODE_1;
|
|
break;
|
|
case COUNTER_FUNCTION_PULSE_DIRECTION:
|
|
timer_mode = RZ_MTU3_TMDR1_PH_CNT_MODE_2;
|
|
break;
|
|
case COUNTER_FUNCTION_QUADRATURE_X2_B:
|
|
timer_mode = RZ_MTU3_TMDR1_PH_CNT_MODE_4;
|
|
break;
|
|
default:
|
|
/*
|
|
* TODO:
|
|
* - need to add RZ_MTU3_TMDR1_PH_CNT_MODE_3
|
|
* - need to add RZ_MTU3_TMDR1_PH_CNT_MODE_5
|
|
*/
|
|
mutex_unlock(&priv->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pm_runtime_get_sync(ch->dev);
|
|
rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1, timer_mode);
|
|
pm_runtime_put(ch->dev);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_count_direction_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
enum counter_count_direction *direction)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret;
|
|
u8 tsr;
|
|
|
|
ret = rz_mtu3_lock_if_count_is_enabled(ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_sync(ch->dev);
|
|
tsr = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TSR);
|
|
pm_runtime_put(ch->dev);
|
|
|
|
*direction = (tsr & RZ_MTU3_TSR_TCFD) ?
|
|
COUNTER_COUNT_DIRECTION_FORWARD : COUNTER_COUNT_DIRECTION_BACKWARD;
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_count_ceiling_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
u64 *ceiling)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
const size_t ch_id = rz_mtu3_get_hw_ch(count->id);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_counter_is_valid(counter, ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (count->id) {
|
|
case RZ_MTU3_16_BIT_MTU1_CH:
|
|
case RZ_MTU3_16_BIT_MTU2_CH:
|
|
*ceiling = priv->mtu_16bit_max[ch_id];
|
|
break;
|
|
case RZ_MTU3_32_BIT_CH:
|
|
*ceiling = priv->mtu_32bit_max;
|
|
break;
|
|
default:
|
|
/* should never reach this path */
|
|
mutex_unlock(&priv->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&priv->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_count_ceiling_write(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
u64 ceiling)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
const size_t ch_id = rz_mtu3_get_hw_ch(count->id);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_counter_is_valid(counter, ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (count->id) {
|
|
case RZ_MTU3_16_BIT_MTU1_CH:
|
|
case RZ_MTU3_16_BIT_MTU2_CH:
|
|
if (ceiling > U16_MAX) {
|
|
mutex_unlock(&priv->lock);
|
|
return -ERANGE;
|
|
}
|
|
priv->mtu_16bit_max[ch_id] = ceiling;
|
|
break;
|
|
case RZ_MTU3_32_BIT_CH:
|
|
if (ceiling > U32_MAX) {
|
|
mutex_unlock(&priv->lock);
|
|
return -ERANGE;
|
|
}
|
|
priv->mtu_32bit_max = ceiling;
|
|
break;
|
|
default:
|
|
/* should never reach this path */
|
|
mutex_unlock(&priv->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pm_runtime_get_sync(ch->dev);
|
|
if (count->id == RZ_MTU3_32_BIT_CH)
|
|
rz_mtu3_32bit_ch_write(ch, RZ_MTU3_TGRALW, ceiling);
|
|
else
|
|
rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRA, ceiling);
|
|
|
|
rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR, RZ_MTU3_TCR_CCLR_TGRA);
|
|
pm_runtime_put(ch->dev);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rz_mtu3_32bit_cnt_setting(struct counter_device *counter)
|
|
{
|
|
struct rz_mtu3_channel *const ch1 = rz_mtu3_get_ch(counter, 0);
|
|
struct rz_mtu3_channel *const ch2 = rz_mtu3_get_ch(counter, 1);
|
|
|
|
/* Phase counting mode 1 is used as default in initialization. */
|
|
rz_mtu3_8bit_ch_write(ch1, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_PH_CNT_MODE_1);
|
|
|
|
rz_mtu3_8bit_ch_write(ch1, RZ_MTU3_TCR, RZ_MTU3_TCR_CCLR_TGRA);
|
|
rz_mtu3_8bit_ch_write(ch1, RZ_MTU3_TIOR, RZ_MTU3_TIOR_IC_BOTH);
|
|
|
|
rz_mtu3_enable(ch1);
|
|
rz_mtu3_enable(ch2);
|
|
}
|
|
|
|
static void rz_mtu3_16bit_cnt_setting(struct counter_device *counter, int id)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, id);
|
|
|
|
/* Phase counting mode 1 is used as default in initialization. */
|
|
rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_PH_CNT_MODE_1);
|
|
|
|
rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR, RZ_MTU3_TCR_CCLR_TGRA);
|
|
rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIOR, RZ_MTU3_TIOR_NO_OUTPUT);
|
|
rz_mtu3_enable(ch);
|
|
}
|
|
|
|
static int rz_mtu3_initialize_counter(struct counter_device *counter, int id)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, id);
|
|
struct rz_mtu3_channel *const ch1 = rz_mtu3_get_ch(counter, 0);
|
|
struct rz_mtu3_channel *const ch2 = rz_mtu3_get_ch(counter, 1);
|
|
|
|
switch (id) {
|
|
case RZ_MTU3_16_BIT_MTU1_CH:
|
|
case RZ_MTU3_16_BIT_MTU2_CH:
|
|
if (!rz_mtu3_request_channel(ch))
|
|
return -EBUSY;
|
|
|
|
rz_mtu3_16bit_cnt_setting(counter, id);
|
|
return 0;
|
|
case RZ_MTU3_32_BIT_CH:
|
|
/*
|
|
* 32-bit phase counting need MTU1 and MTU2 to create 32-bit
|
|
* cascade counter.
|
|
*/
|
|
if (!rz_mtu3_request_channel(ch1))
|
|
return -EBUSY;
|
|
|
|
if (!rz_mtu3_request_channel(ch2)) {
|
|
rz_mtu3_release_channel(ch1);
|
|
return -EBUSY;
|
|
}
|
|
|
|
rz_mtu3_32bit_cnt_setting(counter);
|
|
return 0;
|
|
default:
|
|
/* should never reach this path */
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void rz_mtu3_terminate_counter(struct counter_device *counter, int id)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, id);
|
|
struct rz_mtu3_channel *const ch1 = rz_mtu3_get_ch(counter, 0);
|
|
struct rz_mtu3_channel *const ch2 = rz_mtu3_get_ch(counter, 1);
|
|
|
|
if (id == RZ_MTU3_32_BIT_CH) {
|
|
rz_mtu3_release_channel(ch2);
|
|
rz_mtu3_release_channel(ch1);
|
|
rz_mtu3_disable(ch2);
|
|
rz_mtu3_disable(ch1);
|
|
} else {
|
|
rz_mtu3_release_channel(ch);
|
|
rz_mtu3_disable(ch);
|
|
}
|
|
}
|
|
|
|
static int rz_mtu3_count_enable_read(struct counter_device *counter,
|
|
struct counter_count *count, u8 *enable)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_channel *const ch1 = rz_mtu3_get_ch(counter, 0);
|
|
struct rz_mtu3_channel *const ch2 = rz_mtu3_get_ch(counter, 1);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_count_is_enabled(ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (count->id == RZ_MTU3_32_BIT_CH)
|
|
*enable = rz_mtu3_is_enabled(ch1) && rz_mtu3_is_enabled(ch2);
|
|
else
|
|
*enable = rz_mtu3_is_enabled(ch);
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_count_enable_write(struct counter_device *counter,
|
|
struct counter_count *count, u8 enable)
|
|
{
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret = 0;
|
|
|
|
if (enable) {
|
|
mutex_lock(&priv->lock);
|
|
pm_runtime_get_sync(ch->dev);
|
|
ret = rz_mtu3_initialize_counter(counter, count->id);
|
|
if (ret == 0)
|
|
priv->count_is_enabled[count->id] = true;
|
|
mutex_unlock(&priv->lock);
|
|
} else {
|
|
mutex_lock(&priv->lock);
|
|
rz_mtu3_terminate_counter(counter, count->id);
|
|
priv->count_is_enabled[count->id] = false;
|
|
pm_runtime_put(ch->dev);
|
|
mutex_unlock(&priv->lock);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rz_mtu3_lock_if_ch0_is_enabled(struct rz_mtu3_cnt *const priv)
|
|
{
|
|
mutex_lock(&priv->lock);
|
|
if (priv->ch->is_busy && !(priv->count_is_enabled[RZ_MTU3_16_BIT_MTU1_CH] ||
|
|
priv->count_is_enabled[RZ_MTU3_32_BIT_CH])) {
|
|
mutex_unlock(&priv->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_cascade_counts_enable_get(struct counter_device *counter,
|
|
u8 *cascade_enable)
|
|
{
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
unsigned long tmdr;
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_ch0_is_enabled(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_sync(priv->ch->dev);
|
|
tmdr = rz_mtu3_shared_reg_read(priv->ch, RZ_MTU3_TMDR3);
|
|
pm_runtime_put(priv->ch->dev);
|
|
*cascade_enable = test_bit(RZ_MTU3_TMDR3_LWA, &tmdr);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_cascade_counts_enable_set(struct counter_device *counter,
|
|
u8 cascade_enable)
|
|
{
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_ch0_is_enabled(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_sync(priv->ch->dev);
|
|
rz_mtu3_shared_reg_update_bit(priv->ch, RZ_MTU3_TMDR3,
|
|
RZ_MTU3_TMDR3_LWA, cascade_enable);
|
|
pm_runtime_put(priv->ch->dev);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_ext_input_phase_clock_select_get(struct counter_device *counter,
|
|
u32 *ext_input_phase_clock_select)
|
|
{
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
unsigned long tmdr;
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_ch0_is_enabled(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_sync(priv->ch->dev);
|
|
tmdr = rz_mtu3_shared_reg_read(priv->ch, RZ_MTU3_TMDR3);
|
|
pm_runtime_put(priv->ch->dev);
|
|
*ext_input_phase_clock_select = test_bit(RZ_MTU3_TMDR3_PHCKSEL, &tmdr);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_ext_input_phase_clock_select_set(struct counter_device *counter,
|
|
u32 ext_input_phase_clock_select)
|
|
{
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_ch0_is_enabled(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_sync(priv->ch->dev);
|
|
rz_mtu3_shared_reg_update_bit(priv->ch, RZ_MTU3_TMDR3,
|
|
RZ_MTU3_TMDR3_PHCKSEL,
|
|
ext_input_phase_clock_select);
|
|
pm_runtime_put(priv->ch->dev);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct counter_comp rz_mtu3_count_ext[] = {
|
|
COUNTER_COMP_DIRECTION(rz_mtu3_count_direction_read),
|
|
COUNTER_COMP_ENABLE(rz_mtu3_count_enable_read,
|
|
rz_mtu3_count_enable_write),
|
|
COUNTER_COMP_CEILING(rz_mtu3_count_ceiling_read,
|
|
rz_mtu3_count_ceiling_write),
|
|
};
|
|
|
|
static const enum counter_synapse_action rz_mtu3_synapse_actions[] = {
|
|
COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
|
|
COUNTER_SYNAPSE_ACTION_RISING_EDGE,
|
|
COUNTER_SYNAPSE_ACTION_NONE,
|
|
};
|
|
|
|
static int rz_mtu3_action_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
struct counter_synapse *synapse,
|
|
enum counter_synapse_action *action)
|
|
{
|
|
const bool is_signal_ab = (synapse->signal->id == SIGNAL_A_ID) ||
|
|
(synapse->signal->id == SIGNAL_B_ID);
|
|
struct rz_mtu3_channel *const ch = rz_mtu3_get_ch(counter, count->id);
|
|
struct rz_mtu3_cnt *const priv = counter_priv(counter);
|
|
enum counter_function function;
|
|
bool mtclkc_mtclkd;
|
|
unsigned long tmdr;
|
|
int ret;
|
|
|
|
ret = rz_mtu3_lock_if_count_is_enabled(ch, priv, count->id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rz_mtu3_count_function_read_helper(ch, priv, &function);
|
|
if (ret) {
|
|
mutex_unlock(&priv->lock);
|
|
return ret;
|
|
}
|
|
|
|
/* Default action mode */
|
|
*action = COUNTER_SYNAPSE_ACTION_NONE;
|
|
|
|
if (count->id != RZ_MTU3_16_BIT_MTU1_CH) {
|
|
tmdr = rz_mtu3_shared_reg_read(priv->ch, RZ_MTU3_TMDR3);
|
|
mtclkc_mtclkd = test_bit(RZ_MTU3_TMDR3_PHCKSEL, &tmdr);
|
|
if ((mtclkc_mtclkd && is_signal_ab) ||
|
|
(!mtclkc_mtclkd && !is_signal_ab)) {
|
|
mutex_unlock(&priv->lock);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
switch (function) {
|
|
case COUNTER_FUNCTION_PULSE_DIRECTION:
|
|
/*
|
|
* Rising edges on signal A (signal C) updates the respective
|
|
* count. The input level of signal B (signal D) determines
|
|
* direction.
|
|
*/
|
|
if (synapse->signal->id == SIGNAL_A_ID ||
|
|
synapse->signal->id == SIGNAL_C_ID)
|
|
*action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
|
|
break;
|
|
case COUNTER_FUNCTION_QUADRATURE_X2_B:
|
|
/*
|
|
* Any state transition on quadrature pair signal B (signal D)
|
|
* updates the respective count.
|
|
*/
|
|
if (synapse->signal->id == SIGNAL_B_ID ||
|
|
synapse->signal->id == SIGNAL_D_ID)
|
|
*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
|
|
break;
|
|
case COUNTER_FUNCTION_QUADRATURE_X4:
|
|
/* counts up/down on both edges of A (C) and B (D) signal */
|
|
*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
|
|
break;
|
|
default:
|
|
/* should never reach this path */
|
|
mutex_unlock(&priv->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct counter_ops rz_mtu3_cnt_ops = {
|
|
.count_read = rz_mtu3_count_read,
|
|
.count_write = rz_mtu3_count_write,
|
|
.function_read = rz_mtu3_count_function_read,
|
|
.function_write = rz_mtu3_count_function_write,
|
|
.action_read = rz_mtu3_action_read,
|
|
};
|
|
|
|
#define RZ_MTU3_PHASE_SIGNAL(_id, _name) { \
|
|
.id = (_id), \
|
|
.name = (_name), \
|
|
}
|
|
|
|
static struct counter_signal rz_mtu3_signals[] = {
|
|
RZ_MTU3_PHASE_SIGNAL(SIGNAL_A_ID, "MTU1 MTCLKA"),
|
|
RZ_MTU3_PHASE_SIGNAL(SIGNAL_B_ID, "MTU1 MTCLKB"),
|
|
RZ_MTU3_PHASE_SIGNAL(SIGNAL_C_ID, "MTU2 MTCLKC"),
|
|
RZ_MTU3_PHASE_SIGNAL(SIGNAL_D_ID, "MTU2 MTCLKD"),
|
|
};
|
|
|
|
static struct counter_synapse rz_mtu3_mtu1_count_synapses[] = {
|
|
{
|
|
.actions_list = rz_mtu3_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(rz_mtu3_synapse_actions),
|
|
.signal = rz_mtu3_signals,
|
|
},
|
|
{
|
|
.actions_list = rz_mtu3_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(rz_mtu3_synapse_actions),
|
|
.signal = rz_mtu3_signals + 1,
|
|
}
|
|
};
|
|
|
|
static struct counter_synapse rz_mtu3_mtu2_count_synapses[] = {
|
|
{
|
|
.actions_list = rz_mtu3_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(rz_mtu3_synapse_actions),
|
|
.signal = rz_mtu3_signals,
|
|
},
|
|
{
|
|
.actions_list = rz_mtu3_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(rz_mtu3_synapse_actions),
|
|
.signal = rz_mtu3_signals + 1,
|
|
},
|
|
{
|
|
.actions_list = rz_mtu3_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(rz_mtu3_synapse_actions),
|
|
.signal = rz_mtu3_signals + 2,
|
|
},
|
|
{
|
|
.actions_list = rz_mtu3_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(rz_mtu3_synapse_actions),
|
|
.signal = rz_mtu3_signals + 3,
|
|
}
|
|
};
|
|
|
|
static struct counter_count rz_mtu3_counts[] = {
|
|
{
|
|
.id = RZ_MTU3_16_BIT_MTU1_CH,
|
|
.name = "Channel 1 Count",
|
|
.functions_list = rz_mtu3_count_functions,
|
|
.num_functions = ARRAY_SIZE(rz_mtu3_count_functions),
|
|
.synapses = rz_mtu3_mtu1_count_synapses,
|
|
.num_synapses = ARRAY_SIZE(rz_mtu3_mtu1_count_synapses),
|
|
.ext = rz_mtu3_count_ext,
|
|
.num_ext = ARRAY_SIZE(rz_mtu3_count_ext),
|
|
},
|
|
{
|
|
.id = RZ_MTU3_16_BIT_MTU2_CH,
|
|
.name = "Channel 2 Count",
|
|
.functions_list = rz_mtu3_count_functions,
|
|
.num_functions = ARRAY_SIZE(rz_mtu3_count_functions),
|
|
.synapses = rz_mtu3_mtu2_count_synapses,
|
|
.num_synapses = ARRAY_SIZE(rz_mtu3_mtu2_count_synapses),
|
|
.ext = rz_mtu3_count_ext,
|
|
.num_ext = ARRAY_SIZE(rz_mtu3_count_ext),
|
|
},
|
|
{
|
|
.id = RZ_MTU3_32_BIT_CH,
|
|
.name = "Channel 1 and 2 (cascaded) Count",
|
|
.functions_list = rz_mtu3_count_functions,
|
|
.num_functions = ARRAY_SIZE(rz_mtu3_count_functions),
|
|
.synapses = rz_mtu3_mtu2_count_synapses,
|
|
.num_synapses = ARRAY_SIZE(rz_mtu3_mtu2_count_synapses),
|
|
.ext = rz_mtu3_count_ext,
|
|
.num_ext = ARRAY_SIZE(rz_mtu3_count_ext),
|
|
}
|
|
};
|
|
|
|
static const char *const rz_mtu3_ext_input_phase_clock_select[] = {
|
|
"MTCLKA-MTCLKB",
|
|
"MTCLKC-MTCLKD",
|
|
};
|
|
|
|
static DEFINE_COUNTER_ENUM(rz_mtu3_ext_input_phase_clock_select_enum,
|
|
rz_mtu3_ext_input_phase_clock_select);
|
|
|
|
static struct counter_comp rz_mtu3_device_ext[] = {
|
|
COUNTER_COMP_DEVICE_BOOL("cascade_counts_enable",
|
|
rz_mtu3_cascade_counts_enable_get,
|
|
rz_mtu3_cascade_counts_enable_set),
|
|
COUNTER_COMP_DEVICE_ENUM("external_input_phase_clock_select",
|
|
rz_mtu3_ext_input_phase_clock_select_get,
|
|
rz_mtu3_ext_input_phase_clock_select_set,
|
|
rz_mtu3_ext_input_phase_clock_select_enum),
|
|
};
|
|
|
|
static int rz_mtu3_cnt_pm_runtime_suspend(struct device *dev)
|
|
{
|
|
struct clk *const clk = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rz_mtu3_cnt_pm_runtime_resume(struct device *dev)
|
|
{
|
|
struct clk *const clk = dev_get_drvdata(dev);
|
|
|
|
clk_prepare_enable(clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_RUNTIME_DEV_PM_OPS(rz_mtu3_cnt_pm_ops,
|
|
rz_mtu3_cnt_pm_runtime_suspend,
|
|
rz_mtu3_cnt_pm_runtime_resume, NULL);
|
|
|
|
static void rz_mtu3_cnt_pm_disable(void *data)
|
|
{
|
|
struct device *dev = data;
|
|
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_suspended(dev);
|
|
}
|
|
|
|
static int rz_mtu3_cnt_probe(struct platform_device *pdev)
|
|
{
|
|
struct rz_mtu3 *ddata = dev_get_drvdata(pdev->dev.parent);
|
|
struct device *dev = &pdev->dev;
|
|
struct counter_device *counter;
|
|
struct rz_mtu3_channel *ch;
|
|
struct rz_mtu3_cnt *priv;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
counter = devm_counter_alloc(dev, sizeof(*priv));
|
|
if (!counter)
|
|
return -ENOMEM;
|
|
|
|
priv = counter_priv(counter);
|
|
priv->clk = ddata->clk;
|
|
priv->mtu_32bit_max = U32_MAX;
|
|
priv->ch = &ddata->channels[RZ_MTU3_CHAN_1];
|
|
ch = &priv->ch[0];
|
|
for (i = 0; i < RZ_MTU3_MAX_HW_CNTR_CHANNELS; i++) {
|
|
ch->dev = dev;
|
|
priv->mtu_16bit_max[i] = U16_MAX;
|
|
ch++;
|
|
}
|
|
|
|
mutex_init(&priv->lock);
|
|
platform_set_drvdata(pdev, priv->clk);
|
|
clk_prepare_enable(priv->clk);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
ret = devm_add_action_or_reset(&pdev->dev, rz_mtu3_cnt_pm_disable, dev);
|
|
if (ret < 0)
|
|
goto disable_clock;
|
|
|
|
counter->name = dev_name(dev);
|
|
counter->parent = dev;
|
|
counter->ops = &rz_mtu3_cnt_ops;
|
|
counter->counts = rz_mtu3_counts;
|
|
counter->num_counts = ARRAY_SIZE(rz_mtu3_counts);
|
|
counter->signals = rz_mtu3_signals;
|
|
counter->num_signals = ARRAY_SIZE(rz_mtu3_signals);
|
|
counter->ext = rz_mtu3_device_ext;
|
|
counter->num_ext = ARRAY_SIZE(rz_mtu3_device_ext);
|
|
|
|
/* Register Counter device */
|
|
ret = devm_counter_add(dev, counter);
|
|
if (ret < 0) {
|
|
dev_err_probe(dev, ret, "Failed to add counter\n");
|
|
goto disable_clock;
|
|
}
|
|
|
|
return 0;
|
|
|
|
disable_clock:
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver rz_mtu3_cnt_driver = {
|
|
.probe = rz_mtu3_cnt_probe,
|
|
.driver = {
|
|
.name = "rz-mtu3-counter",
|
|
.pm = pm_ptr(&rz_mtu3_cnt_pm_ops),
|
|
},
|
|
};
|
|
module_platform_driver(rz_mtu3_cnt_driver);
|
|
|
|
MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
|
|
MODULE_ALIAS("platform:rz-mtu3-counter");
|
|
MODULE_DESCRIPTION("Renesas RZ/G2L MTU3a counter driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_IMPORT_NS(COUNTER);
|