mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-19 09:04:51 +08:00
4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
33 lines
915 B
Plaintext
33 lines
915 B
Plaintext
Serial Peripheral Interface on Cirrus Logic CL-PS71xx, EP72xx, EP73xx
|
|
|
|
Required properties
|
|
- #address-cells: must be <1>
|
|
- #size-cells: must be <0>
|
|
- compatible: should include "cirrus,ep7209-spi"
|
|
- reg: Address and length of one register range
|
|
- interrupts: one interrupt line
|
|
- clocks: One entry, refers to the SPI bus clock
|
|
- cs-gpios: Specifies the gpio pins to be used for chipselects.
|
|
See: Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
|
|
An additional register is present in the system controller,
|
|
which is assumed to be in the same device tree, with and marked
|
|
as compatible with "cirrus,ep7209-syscon3".
|
|
|
|
Example:
|
|
|
|
spi@80000500 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "cirrus,ep7209-spi";
|
|
reg = <0x80000500 0x4>;
|
|
interrupts = <15>;
|
|
clocks = <&clks CLPS711X_CLK_SPI>;
|
|
};
|
|
|
|
syscon3: syscon@80002200 {
|
|
compatible = "cirrus,ep7209-syscon3", "syscon";
|
|
reg = <0x80002200 0x40>;
|
|
};
|
|
|