mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-19 09:04:51 +08:00
76ea4926dc
The OMAP OHCI and EHCI USB host bindings follow the generic binding, so add the compatibles and remove the old txt binding docs. The examples in omap-usb-host.txt don't match actual users, so update them dropping the fallback compatible. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230110-dt-usb-v3-3-5af0541fcf8c@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
104 lines
3.1 KiB
Plaintext
104 lines
3.1 KiB
Plaintext
OMAP HS USB Host
|
|
|
|
Required properties:
|
|
|
|
- compatible: should be "ti,usbhs-host"
|
|
- reg: should contain one register range i.e. start and length
|
|
- ti,hwmods: must contain "usb_host_hs"
|
|
|
|
Optional properties:
|
|
|
|
- num-ports: number of USB ports. Usually this is automatically detected
|
|
from the IP's revision register but can be overridden by specifying
|
|
this property. A maximum of 3 ports are supported at the moment.
|
|
|
|
- portN-mode: String specifying the port mode for port N, where N can be
|
|
from 1 to 3. If the port mode is not specified, that port is treated
|
|
as unused. When specified, it must be one of the following.
|
|
"ehci-phy",
|
|
"ehci-tll",
|
|
"ehci-hsic",
|
|
"ohci-phy-6pin-datse0",
|
|
"ohci-phy-6pin-dpdm",
|
|
"ohci-phy-3pin-datse0",
|
|
"ohci-phy-4pin-dpdm",
|
|
"ohci-tll-6pin-datse0",
|
|
"ohci-tll-6pin-dpdm",
|
|
"ohci-tll-3pin-datse0",
|
|
"ohci-tll-4pin-dpdm",
|
|
"ohci-tll-2pin-datse0",
|
|
"ohci-tll-2pin-dpdm",
|
|
|
|
- single-ulpi-bypass: Must be present if the controller contains a single
|
|
ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
|
|
|
|
- clocks: a list of phandles and clock-specifier pairs, one for each entry in
|
|
clock-names.
|
|
|
|
- clock-names: should include:
|
|
For OMAP3
|
|
* "usbhost_120m_fck" - 120MHz Functional clock.
|
|
|
|
For OMAP4+
|
|
* "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
|
|
* "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
|
|
* "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
|
|
* "utmi_p1_gfclk" - Port 1 UTMI clock mux.
|
|
* "utmi_p2_gfclk" - Port 2 UTMI clock mux.
|
|
* "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
|
|
* "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
|
|
* "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
|
|
* "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
|
|
* "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
|
|
* "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
|
|
* "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
|
|
* "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
|
|
* "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
|
|
|
|
Required properties if child node exists:
|
|
|
|
- #address-cells: Must be 1
|
|
- #size-cells: Must be 1
|
|
- ranges: must be present
|
|
|
|
Properties for children:
|
|
|
|
The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
|
|
See Documentation/devicetree/bindings/usb/generic-ehci.yaml and
|
|
Documentation/devicetree/bindings/usb/generic-ohci.yaml.
|
|
|
|
Example for OMAP4:
|
|
|
|
usbhshost: usbhshost@4a064000 {
|
|
compatible = "ti,usbhs-host";
|
|
reg = <0x4a064000 0x800>;
|
|
ti,hwmods = "usb_host_hs";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbhsohci: ohci@4a064800 {
|
|
compatible = "ti,ohci-omap3";
|
|
reg = <0x4a064800 0x400>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 76 0x4>;
|
|
};
|
|
|
|
usbhsehci: ehci@4a064c00 {
|
|
compatible = "ti,ehci-omap";
|
|
reg = <0x4a064c00 0x400>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 77 0x4>;
|
|
};
|
|
};
|
|
|
|
&usbhshost {
|
|
port1-mode = "ehci-phy";
|
|
port2-mode = "ehci-tll";
|
|
port3-mode = "ehci-phy";
|
|
};
|
|
|
|
&usbhsehci {
|
|
phys = <&hsusb1_phy 0 &hsusb3_phy>;
|
|
};
|