linux/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
Krzysztof Kozlowski ece3c31981 dt-bindings: clock: qcom: Clean-up titles and descriptions
Clean the Qualcomm SoCs clock bindings:
1. Drop redundant "bindings" in title.
2. Correct language grammar "<independent clause without verb>, which
   supports" -> "provides".
3. Use full path to the bindings header, so tools can validate it.
4. Drop quotes where not needed.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # msm8998
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # mmcc
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102163153.55460-2-krzysztof.kozlowski@linaro.org
2022-11-07 22:47:27 -06:00

110 lines
2.8 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display Clock & Reset Controller on SM8150/SM8250/SM8350
maintainers:
- Jonathan Marek <jonathan@marek.ca>
description: |
Qualcomm display clock control module provides the clocks, resets and power
domains on SM8150/SM8250/SM8350.
See also::
include/dt-bindings/clock/qcom,dispcc-sm8150.h
include/dt-bindings/clock/qcom,dispcc-sm8250.h
include/dt-bindings/clock/qcom,dispcc-sm8350.h
properties:
compatible:
enum:
- qcom,sc8180x-dispcc
- qcom,sm8150-dispcc
- qcom,sm8250-dispcc
- qcom,sm8350-dispcc
clocks:
items:
- description: Board XO source
- description: Byte clock from DSI PHY0
- description: Pixel clock from DSI PHY0
- description: Byte clock from DSI PHY1
- description: Pixel clock from DSI PHY1
- description: Link clock from DP PHY
- description: VCO DIV clock from DP PHY
clock-names:
items:
- const: bi_tcxo
- const: dsi0_phy_pll_out_byteclk
- const: dsi0_phy_pll_out_dsiclk
- const: dsi1_phy_pll_out_byteclk
- const: dsi1_phy_pll_out_dsiclk
- const: dp_phy_pll_link_clk
- const: dp_phy_pll_vco_div_clk
'#clock-cells':
const: 1
'#reset-cells':
const: 1
'#power-domain-cells':
const: 1
reg:
maxItems: 1
power-domains:
description:
A phandle and PM domain specifier for the MMCX power domain.
maxItems: 1
required-opps:
description:
A phandle to an OPP node describing required MMCX performance point.
maxItems: 1
required:
- compatible
- reg
- clocks
- clock-names
- '#clock-cells'
- '#reset-cells'
- '#power-domain-cells'
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/power/qcom-rpmpd.h>
clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
reg = <0x0af00000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&dsi0_phy 0>,
<&dsi0_phy 1>,
<&dsi1_phy 0>,
<&dsi1_phy 1>,
<&dp_phy 0>,
<&dp_phy 1>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
power-domains = <&rpmhpd SM8250_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
};
...