mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
750682eb8c
'reg' is the standard property for defining register banks/addresses. Add it to use for the VCO register address and deprecate 'vco-offset'. This will also allow for using standard node names with unit-addresses. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210913192816.1225025-5-robh@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
111 lines
3.4 KiB
YAML
111 lines
3.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ARM System Controller ICST Clocks
|
|
|
|
maintainers:
|
|
- Linus Walleij <linusw@kernel.org>
|
|
|
|
description: |
|
|
The ICS525 and ICS307 oscillators are produced by Integrated
|
|
Devices Technology (IDT). ARM integrated these oscillators deeply into their
|
|
reference designs by adding special control registers that manage such
|
|
oscillators to their system controllers.
|
|
|
|
The various ARM system controllers contain logic to serialize and initialize
|
|
an ICST clock request after a write to the 32 bit register at an offset
|
|
into the system controller. Furthermore, to even be able to alter one of
|
|
these frequencies, the system controller must first be unlocked by
|
|
writing a special token to another offset in the system controller.
|
|
|
|
Some ARM hardware contain special versions of the serial interface that only
|
|
connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to
|
|
different values and sometimes also hard-wires the output divider. They
|
|
therefore have special compatible strings as per this table (the OD value is
|
|
the value on the pins, not the resulting output divider).
|
|
|
|
In the core modules and logic tiles, the ICST is a configurable clock fed
|
|
from a 24 MHz clock on the motherboard (usually the main crystal) used for
|
|
generating e.g. video clocks. It is located on the core module and there is
|
|
only one of these. This clock node must be a subnode of the core module.
|
|
|
|
Hardware variant RDW OD VDW
|
|
|
|
Integrator/AP 22 1 Bit 8 0, rest variable
|
|
integratorap-cm
|
|
|
|
Integrator/AP 46 3 Bit 8 0, rest variable
|
|
integratorap-sys
|
|
|
|
Integrator/AP 22 or 1 17 or (33 or 25 MHz)
|
|
integratorap-pci 14 1 14
|
|
|
|
Integrator/CP 22 variable Bit 8 0, rest variable
|
|
integratorcp-cm-core
|
|
|
|
Integrator/CP 22 variable Bit 8 0, rest variable
|
|
integratorcp-cm-mem
|
|
|
|
The ICST oscillator must be provided inside a system controller node.
|
|
|
|
properties:
|
|
"#clock-cells":
|
|
const: 0
|
|
|
|
compatible:
|
|
enum:
|
|
- arm,syscon-icst525
|
|
- arm,syscon-icst307
|
|
- arm,syscon-icst525-integratorap-cm
|
|
- arm,syscon-icst525-integratorap-sys
|
|
- arm,syscon-icst525-integratorap-pci
|
|
- arm,syscon-icst525-integratorcp-cm-core
|
|
- arm,syscon-icst525-integratorcp-cm-mem
|
|
- arm,integrator-cm-auxosc
|
|
- arm,versatile-cm-auxosc
|
|
- arm,impd1-vco1
|
|
- arm,impd1-vco2
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: The VCO register
|
|
|
|
clocks:
|
|
description: Parent clock for the ICST VCO
|
|
maxItems: 1
|
|
|
|
clock-output-names:
|
|
maxItems: 1
|
|
|
|
lock-offset:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32'
|
|
description: Offset to the unlocking register for the oscillator
|
|
|
|
vco-offset:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32'
|
|
description: Offset to the VCO register for the oscillator
|
|
deprecated: true
|
|
|
|
required:
|
|
- "#clock-cells"
|
|
- compatible
|
|
- clocks
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
vco1: clock {
|
|
compatible = "arm,impd1-vco1";
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x08>;
|
|
vco-offset = <0x00>;
|
|
clocks = <&sysclk>;
|
|
clock-output-names = "IM-PD1-VCO1";
|
|
};
|
|
|
|
...
|