mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
e73cb83c80
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
302 lines
7.4 KiB
C
302 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2017-2018 Hisilicon Limited.
|
|
// Copyright (c) 2017-2018 Linaro Limited.
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mailbox_controller.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "mailbox.h"
|
|
|
|
#define MBOX_CHAN_MAX 32
|
|
|
|
#define MBOX_RX 0x0
|
|
#define MBOX_TX 0x1
|
|
|
|
#define MBOX_BASE(mbox, ch) ((mbox)->base + ((ch) * 0x40))
|
|
#define MBOX_SRC_REG 0x00
|
|
#define MBOX_DST_REG 0x04
|
|
#define MBOX_DCLR_REG 0x08
|
|
#define MBOX_DSTAT_REG 0x0c
|
|
#define MBOX_MODE_REG 0x10
|
|
#define MBOX_IMASK_REG 0x14
|
|
#define MBOX_ICLR_REG 0x18
|
|
#define MBOX_SEND_REG 0x1c
|
|
#define MBOX_DATA_REG 0x20
|
|
|
|
#define MBOX_IPC_LOCK_REG 0xa00
|
|
#define MBOX_IPC_UNLOCK 0x1acce551
|
|
|
|
#define MBOX_AUTOMATIC_ACK 1
|
|
|
|
#define MBOX_STATE_IDLE BIT(4)
|
|
#define MBOX_STATE_READY BIT(5)
|
|
#define MBOX_STATE_ACK BIT(7)
|
|
|
|
#define MBOX_MSG_LEN 8
|
|
|
|
/**
|
|
* Hi3660 mailbox channel information
|
|
*
|
|
* A channel can be used for TX or RX, it can trigger remote
|
|
* processor interrupt to notify remote processor and can receive
|
|
* interrupt if has incoming message.
|
|
*
|
|
* @dst_irq: Interrupt vector for remote processor
|
|
* @ack_irq: Interrupt vector for local processor
|
|
*/
|
|
struct hi3660_chan_info {
|
|
unsigned int dst_irq;
|
|
unsigned int ack_irq;
|
|
};
|
|
|
|
/**
|
|
* Hi3660 mailbox controller data
|
|
*
|
|
* Mailbox controller includes 32 channels and can allocate
|
|
* channel for message transferring.
|
|
*
|
|
* @dev: Device to which it is attached
|
|
* @base: Base address of the register mapping region
|
|
* @chan: Representation of channels in mailbox controller
|
|
* @mchan: Representation of channel info
|
|
* @controller: Representation of a communication channel controller
|
|
*/
|
|
struct hi3660_mbox {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct mbox_chan chan[MBOX_CHAN_MAX];
|
|
struct hi3660_chan_info mchan[MBOX_CHAN_MAX];
|
|
struct mbox_controller controller;
|
|
};
|
|
|
|
static struct hi3660_mbox *to_hi3660_mbox(struct mbox_controller *mbox)
|
|
{
|
|
return container_of(mbox, struct hi3660_mbox, controller);
|
|
}
|
|
|
|
static int hi3660_mbox_check_state(struct mbox_chan *chan)
|
|
{
|
|
unsigned long ch = (unsigned long)chan->con_priv;
|
|
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
|
|
struct hi3660_chan_info *mchan = &mbox->mchan[ch];
|
|
void __iomem *base = MBOX_BASE(mbox, ch);
|
|
unsigned long val;
|
|
unsigned int ret;
|
|
|
|
/* Mailbox is ready to use */
|
|
if (readl(base + MBOX_MODE_REG) & MBOX_STATE_READY)
|
|
return 0;
|
|
|
|
/* Wait for acknowledge from remote */
|
|
ret = readx_poll_timeout_atomic(readl, base + MBOX_MODE_REG,
|
|
val, (val & MBOX_STATE_ACK), 1000, 300000);
|
|
if (ret) {
|
|
dev_err(mbox->dev, "%s: timeout for receiving ack\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
/* clear ack state, mailbox will get back to ready state */
|
|
writel(BIT(mchan->ack_irq), base + MBOX_ICLR_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi3660_mbox_unlock(struct mbox_chan *chan)
|
|
{
|
|
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
|
|
unsigned int val, retry = 3;
|
|
|
|
do {
|
|
writel(MBOX_IPC_UNLOCK, mbox->base + MBOX_IPC_LOCK_REG);
|
|
|
|
val = readl(mbox->base + MBOX_IPC_LOCK_REG);
|
|
if (!val)
|
|
break;
|
|
|
|
udelay(10);
|
|
} while (retry--);
|
|
|
|
if (val)
|
|
dev_err(mbox->dev, "%s: failed to unlock mailbox\n", __func__);
|
|
|
|
return (!val) ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int hi3660_mbox_acquire_channel(struct mbox_chan *chan)
|
|
{
|
|
unsigned long ch = (unsigned long)chan->con_priv;
|
|
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
|
|
struct hi3660_chan_info *mchan = &mbox->mchan[ch];
|
|
void __iomem *base = MBOX_BASE(mbox, ch);
|
|
unsigned int val, retry;
|
|
|
|
for (retry = 10; retry; retry--) {
|
|
/* Check if channel is in idle state */
|
|
if (readl(base + MBOX_MODE_REG) & MBOX_STATE_IDLE) {
|
|
writel(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
|
|
|
|
/* Check ack bit has been set successfully */
|
|
val = readl(base + MBOX_SRC_REG);
|
|
if (val & BIT(mchan->ack_irq))
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!retry)
|
|
dev_err(mbox->dev, "%s: failed to acquire channel\n", __func__);
|
|
|
|
return retry ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int hi3660_mbox_startup(struct mbox_chan *chan)
|
|
{
|
|
int ret;
|
|
|
|
ret = hi3660_mbox_unlock(chan);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hi3660_mbox_acquire_channel(chan);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
|
|
{
|
|
unsigned long ch = (unsigned long)chan->con_priv;
|
|
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
|
|
struct hi3660_chan_info *mchan = &mbox->mchan[ch];
|
|
void __iomem *base = MBOX_BASE(mbox, ch);
|
|
u32 *buf = msg;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ret = hi3660_mbox_check_state(chan);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Clear mask for destination interrupt */
|
|
writel_relaxed(~BIT(mchan->dst_irq), base + MBOX_IMASK_REG);
|
|
|
|
/* Config destination for interrupt vector */
|
|
writel_relaxed(BIT(mchan->dst_irq), base + MBOX_DST_REG);
|
|
|
|
/* Automatic acknowledge mode */
|
|
writel_relaxed(MBOX_AUTOMATIC_ACK, base + MBOX_MODE_REG);
|
|
|
|
/* Fill message data */
|
|
for (i = 0; i < MBOX_MSG_LEN; i++)
|
|
writel_relaxed(buf[i], base + MBOX_DATA_REG + i * 4);
|
|
|
|
/* Trigger data transferring */
|
|
writel(BIT(mchan->ack_irq), base + MBOX_SEND_REG);
|
|
return 0;
|
|
}
|
|
|
|
static const struct mbox_chan_ops hi3660_mbox_ops = {
|
|
.startup = hi3660_mbox_startup,
|
|
.send_data = hi3660_mbox_send_data,
|
|
};
|
|
|
|
static struct mbox_chan *hi3660_mbox_xlate(struct mbox_controller *controller,
|
|
const struct of_phandle_args *spec)
|
|
{
|
|
struct hi3660_mbox *mbox = to_hi3660_mbox(controller);
|
|
struct hi3660_chan_info *mchan;
|
|
unsigned int ch = spec->args[0];
|
|
|
|
if (ch >= MBOX_CHAN_MAX) {
|
|
dev_err(mbox->dev, "Invalid channel idx %d\n", ch);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
mchan = &mbox->mchan[ch];
|
|
mchan->dst_irq = spec->args[1];
|
|
mchan->ack_irq = spec->args[2];
|
|
|
|
return &mbox->chan[ch];
|
|
}
|
|
|
|
static const struct of_device_id hi3660_mbox_of_match[] = {
|
|
{ .compatible = "hisilicon,hi3660-mbox", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, hi3660_mbox_of_match);
|
|
|
|
static int hi3660_mbox_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct hi3660_mbox *mbox;
|
|
struct mbox_chan *chan;
|
|
struct resource *res;
|
|
unsigned long ch;
|
|
int err;
|
|
|
|
mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
|
|
if (!mbox)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
mbox->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(mbox->base))
|
|
return PTR_ERR(mbox->base);
|
|
|
|
mbox->dev = dev;
|
|
mbox->controller.dev = dev;
|
|
mbox->controller.chans = mbox->chan;
|
|
mbox->controller.num_chans = MBOX_CHAN_MAX;
|
|
mbox->controller.ops = &hi3660_mbox_ops;
|
|
mbox->controller.of_xlate = hi3660_mbox_xlate;
|
|
|
|
/* Initialize mailbox channel data */
|
|
chan = mbox->chan;
|
|
for (ch = 0; ch < MBOX_CHAN_MAX; ch++)
|
|
chan[ch].con_priv = (void *)ch;
|
|
|
|
err = devm_mbox_controller_register(dev, &mbox->controller);
|
|
if (err) {
|
|
dev_err(dev, "Failed to register mailbox %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mbox);
|
|
dev_info(dev, "Mailbox enabled\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver hi3660_mbox_driver = {
|
|
.probe = hi3660_mbox_probe,
|
|
.driver = {
|
|
.name = "hi3660-mbox",
|
|
.of_match_table = hi3660_mbox_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init hi3660_mbox_init(void)
|
|
{
|
|
return platform_driver_register(&hi3660_mbox_driver);
|
|
}
|
|
core_initcall(hi3660_mbox_init);
|
|
|
|
static void __exit hi3660_mbox_exit(void)
|
|
{
|
|
platform_driver_unregister(&hi3660_mbox_driver);
|
|
}
|
|
module_exit(hi3660_mbox_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Hisilicon Hi3660 Mailbox Controller");
|
|
MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
|