mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
4590c07462
Convert the via-camera to the vb2 framework. With this change this driver passes all 'v4l2-compliance -s' tests on my OLPC 1.5. Also tested with the Sugar 'Record' application. All tests were done under the OLPC official 5.0.8 kernel. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
1321 lines
34 KiB
C
1321 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for the VIA Chrome integrated camera controller.
|
|
*
|
|
* Copyright 2009,2010 Jonathan Corbet <corbet@lwn.net>
|
|
*
|
|
* This work was supported by the One Laptop Per Child project
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/list.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/videodev2.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-image-sizes.h>
|
|
#include <media/i2c/ov7670.h>
|
|
#include <media/videobuf2-dma-sg.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm_qos.h>
|
|
#include <linux/via-core.h>
|
|
#include <linux/via-gpio.h>
|
|
#include <linux/via_i2c.h>
|
|
|
|
#ifdef CONFIG_X86
|
|
#include <asm/olpc.h>
|
|
#else
|
|
#define machine_is_olpc(x) 0
|
|
#endif
|
|
|
|
#include "via-camera.h"
|
|
|
|
MODULE_ALIAS("platform:viafb-camera");
|
|
MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
|
|
MODULE_DESCRIPTION("VIA framebuffer-based camera controller driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static bool flip_image;
|
|
module_param(flip_image, bool, 0444);
|
|
MODULE_PARM_DESC(flip_image,
|
|
"If set, the sensor will be instructed to flip the image vertically.");
|
|
|
|
static bool override_serial;
|
|
module_param(override_serial, bool, 0444);
|
|
MODULE_PARM_DESC(override_serial,
|
|
"The camera driver will normally refuse to load if the XO 1.5 serial port is enabled. Set this option to force-enable the camera.");
|
|
|
|
/*
|
|
* The structure describing our camera.
|
|
*/
|
|
enum viacam_opstate { S_IDLE = 0, S_RUNNING = 1 };
|
|
|
|
struct via_camera {
|
|
struct v4l2_device v4l2_dev;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
struct video_device vdev;
|
|
struct v4l2_subdev *sensor;
|
|
struct platform_device *platdev;
|
|
struct viafb_dev *viadev;
|
|
struct mutex lock;
|
|
enum viacam_opstate opstate;
|
|
unsigned long flags;
|
|
struct pm_qos_request qos_request;
|
|
/*
|
|
* GPIO info for power/reset management
|
|
*/
|
|
int power_gpio;
|
|
int reset_gpio;
|
|
/*
|
|
* I/O memory stuff.
|
|
*/
|
|
void __iomem *mmio; /* Where the registers live */
|
|
void __iomem *fbmem; /* Frame buffer memory */
|
|
u32 fb_offset; /* Reserved memory offset (FB) */
|
|
/*
|
|
* Capture buffers and related. The controller supports
|
|
* up to three, so that's what we have here. These buffers
|
|
* live in frame buffer memory, so we don't call them "DMA".
|
|
*/
|
|
unsigned int cb_offsets[3]; /* offsets into fb mem */
|
|
u8 __iomem *cb_addrs[3]; /* Kernel-space addresses */
|
|
int n_cap_bufs; /* How many are we using? */
|
|
struct vb2_queue vq;
|
|
struct list_head buffer_queue;
|
|
u32 sequence;
|
|
/*
|
|
* Video format information. sensor_format is kept in a form
|
|
* that we can use to pass to the sensor. We always run the
|
|
* sensor in VGA resolution, though, and let the controller
|
|
* downscale things if need be. So we keep the "real*
|
|
* dimensions separately.
|
|
*/
|
|
struct v4l2_pix_format sensor_format;
|
|
struct v4l2_pix_format user_format;
|
|
u32 mbus_code;
|
|
};
|
|
|
|
/* buffer for one video frame */
|
|
struct via_buffer {
|
|
/* common v4l buffer stuff -- must be first */
|
|
struct vb2_v4l2_buffer vbuf;
|
|
struct list_head queue;
|
|
};
|
|
|
|
/*
|
|
* Yes, this is a hack, but there's only going to be one of these
|
|
* on any system we know of.
|
|
*/
|
|
static struct via_camera *via_cam_info;
|
|
|
|
/*
|
|
* Flag values, manipulated with bitops
|
|
*/
|
|
#define CF_DMA_ACTIVE 0 /* A frame is incoming */
|
|
#define CF_CONFIG_NEEDED 1 /* Must configure hardware */
|
|
|
|
|
|
/*
|
|
* Nasty ugly v4l2 boilerplate.
|
|
*/
|
|
#define sensor_call(cam, optype, func, args...) \
|
|
v4l2_subdev_call(cam->sensor, optype, func, ##args)
|
|
|
|
/*
|
|
* Debugging and related.
|
|
*/
|
|
#define cam_err(cam, fmt, arg...) \
|
|
dev_err(&(cam)->platdev->dev, fmt, ##arg);
|
|
#define cam_warn(cam, fmt, arg...) \
|
|
dev_warn(&(cam)->platdev->dev, fmt, ##arg);
|
|
#define cam_dbg(cam, fmt, arg...) \
|
|
dev_dbg(&(cam)->platdev->dev, fmt, ##arg);
|
|
|
|
/*
|
|
* Format handling. This is ripped almost directly from Hans's changes
|
|
* to cafe_ccic.c. It's a little unfortunate; until this change, we
|
|
* didn't need to know anything about the format except its byte depth;
|
|
* now this information must be managed at this level too.
|
|
*/
|
|
static struct via_format {
|
|
__u32 pixelformat;
|
|
int bpp; /* Bytes per pixel */
|
|
u32 mbus_code;
|
|
} via_formats[] = {
|
|
{
|
|
.pixelformat = V4L2_PIX_FMT_YUYV,
|
|
.mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
|
|
.bpp = 2,
|
|
},
|
|
/* RGB444 and Bayer should be doable, but have never been
|
|
tested with this driver. RGB565 seems to work at the default
|
|
resolution, but results in color corruption when being scaled by
|
|
viacam_set_scaled(), and is disabled as a result. */
|
|
};
|
|
#define N_VIA_FMTS ARRAY_SIZE(via_formats)
|
|
|
|
static struct via_format *via_find_format(u32 pixelformat)
|
|
{
|
|
unsigned i;
|
|
|
|
for (i = 0; i < N_VIA_FMTS; i++)
|
|
if (via_formats[i].pixelformat == pixelformat)
|
|
return via_formats + i;
|
|
/* Not found? Then return the first format. */
|
|
return via_formats;
|
|
}
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/*
|
|
* Sensor power/reset management. This piece is OLPC-specific for
|
|
* sure; other configurations will have things connected differently.
|
|
*/
|
|
static int via_sensor_power_setup(struct via_camera *cam)
|
|
{
|
|
int ret;
|
|
|
|
cam->power_gpio = viafb_gpio_lookup("VGPIO3");
|
|
cam->reset_gpio = viafb_gpio_lookup("VGPIO2");
|
|
if (!gpio_is_valid(cam->power_gpio) || !gpio_is_valid(cam->reset_gpio)) {
|
|
dev_err(&cam->platdev->dev, "Unable to find GPIO lines\n");
|
|
return -EINVAL;
|
|
}
|
|
ret = gpio_request(cam->power_gpio, "viafb-camera");
|
|
if (ret) {
|
|
dev_err(&cam->platdev->dev, "Unable to request power GPIO\n");
|
|
return ret;
|
|
}
|
|
ret = gpio_request(cam->reset_gpio, "viafb-camera");
|
|
if (ret) {
|
|
dev_err(&cam->platdev->dev, "Unable to request reset GPIO\n");
|
|
gpio_free(cam->power_gpio);
|
|
return ret;
|
|
}
|
|
gpio_direction_output(cam->power_gpio, 0);
|
|
gpio_direction_output(cam->reset_gpio, 0);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Power up the sensor and perform the reset dance.
|
|
*/
|
|
static void via_sensor_power_up(struct via_camera *cam)
|
|
{
|
|
gpio_set_value(cam->power_gpio, 1);
|
|
gpio_set_value(cam->reset_gpio, 0);
|
|
msleep(20); /* Probably excessive */
|
|
gpio_set_value(cam->reset_gpio, 1);
|
|
msleep(20);
|
|
}
|
|
|
|
static void via_sensor_power_down(struct via_camera *cam)
|
|
{
|
|
gpio_set_value(cam->power_gpio, 0);
|
|
gpio_set_value(cam->reset_gpio, 0);
|
|
}
|
|
|
|
|
|
static void via_sensor_power_release(struct via_camera *cam)
|
|
{
|
|
via_sensor_power_down(cam);
|
|
gpio_free(cam->power_gpio);
|
|
gpio_free(cam->reset_gpio);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------------*/
|
|
/* Sensor ops */
|
|
|
|
/*
|
|
* Manage the ov7670 "flip" bit, which needs special help.
|
|
*/
|
|
static int viacam_set_flip(struct via_camera *cam)
|
|
{
|
|
struct v4l2_control ctrl;
|
|
|
|
memset(&ctrl, 0, sizeof(ctrl));
|
|
ctrl.id = V4L2_CID_VFLIP;
|
|
ctrl.value = flip_image;
|
|
return v4l2_s_ctrl(NULL, cam->sensor->ctrl_handler, &ctrl);
|
|
}
|
|
|
|
/*
|
|
* Configure the sensor. It's up to the caller to ensure
|
|
* that the camera is in the correct operating state.
|
|
*/
|
|
static int viacam_configure_sensor(struct via_camera *cam)
|
|
{
|
|
struct v4l2_subdev_format format = {
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
};
|
|
int ret;
|
|
|
|
v4l2_fill_mbus_format(&format.format, &cam->sensor_format, cam->mbus_code);
|
|
ret = sensor_call(cam, core, init, 0);
|
|
if (ret == 0)
|
|
ret = sensor_call(cam, pad, set_fmt, NULL, &format);
|
|
/*
|
|
* OV7670 does weird things if flip is set *before* format...
|
|
*/
|
|
if (ret == 0)
|
|
ret = viacam_set_flip(cam);
|
|
return ret;
|
|
}
|
|
|
|
|
|
|
|
/* --------------------------------------------------------------------------*/
|
|
/*
|
|
* Some simple register accessors; they assume that the lock is held.
|
|
*
|
|
* Should we want to support the second capture engine, we could
|
|
* hide the register difference by adding 0x1000 to registers in the
|
|
* 0x300-350 range.
|
|
*/
|
|
static inline void viacam_write_reg(struct via_camera *cam,
|
|
int reg, int value)
|
|
{
|
|
iowrite32(value, cam->mmio + reg);
|
|
}
|
|
|
|
static inline int viacam_read_reg(struct via_camera *cam, int reg)
|
|
{
|
|
return ioread32(cam->mmio + reg);
|
|
}
|
|
|
|
static inline void viacam_write_reg_mask(struct via_camera *cam,
|
|
int reg, int value, int mask)
|
|
{
|
|
int tmp = viacam_read_reg(cam, reg);
|
|
|
|
tmp = (tmp & ~mask) | (value & mask);
|
|
viacam_write_reg(cam, reg, tmp);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------------*/
|
|
/* Interrupt management and handling */
|
|
|
|
static irqreturn_t viacam_quick_irq(int irq, void *data)
|
|
{
|
|
struct via_camera *cam = data;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
int icv;
|
|
|
|
/*
|
|
* All we do here is to clear the interrupts and tell
|
|
* the handler thread to wake up.
|
|
*/
|
|
spin_lock(&cam->viadev->reg_lock);
|
|
icv = viacam_read_reg(cam, VCR_INTCTRL);
|
|
if (icv & VCR_IC_EAV) {
|
|
icv |= VCR_IC_EAV|VCR_IC_EVBI|VCR_IC_FFULL;
|
|
viacam_write_reg(cam, VCR_INTCTRL, icv);
|
|
ret = IRQ_WAKE_THREAD;
|
|
}
|
|
spin_unlock(&cam->viadev->reg_lock);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Find the next buffer which has somebody waiting on it.
|
|
*/
|
|
static struct via_buffer *viacam_next_buffer(struct via_camera *cam)
|
|
{
|
|
if (cam->opstate != S_RUNNING)
|
|
return NULL;
|
|
if (list_empty(&cam->buffer_queue))
|
|
return NULL;
|
|
return list_entry(cam->buffer_queue.next, struct via_buffer, queue);
|
|
}
|
|
|
|
/*
|
|
* The threaded IRQ handler.
|
|
*/
|
|
static irqreturn_t viacam_irq(int irq, void *data)
|
|
{
|
|
struct via_camera *cam = data;
|
|
struct via_buffer *vb;
|
|
int bufn;
|
|
struct sg_table *sgt;
|
|
|
|
mutex_lock(&cam->lock);
|
|
/*
|
|
* If there is no place to put the data frame, don't bother
|
|
* with anything else.
|
|
*/
|
|
vb = viacam_next_buffer(cam);
|
|
if (vb == NULL)
|
|
goto done;
|
|
/*
|
|
* Figure out which buffer we just completed.
|
|
*/
|
|
bufn = (viacam_read_reg(cam, VCR_INTCTRL) & VCR_IC_ACTBUF) >> 3;
|
|
bufn -= 1;
|
|
if (bufn < 0)
|
|
bufn = cam->n_cap_bufs - 1;
|
|
/*
|
|
* Copy over the data and let any waiters know.
|
|
*/
|
|
sgt = vb2_dma_sg_plane_desc(&vb->vbuf.vb2_buf, 0);
|
|
vb->vbuf.vb2_buf.timestamp = ktime_get_ns();
|
|
viafb_dma_copy_out_sg(cam->cb_offsets[bufn], sgt->sgl, sgt->nents);
|
|
vb->vbuf.sequence = cam->sequence++;
|
|
vb->vbuf.field = V4L2_FIELD_NONE;
|
|
list_del(&vb->queue);
|
|
vb2_buffer_done(&vb->vbuf.vb2_buf, VB2_BUF_STATE_DONE);
|
|
done:
|
|
mutex_unlock(&cam->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
/*
|
|
* These functions must mess around with the general interrupt
|
|
* control register, which is relevant to much more than just the
|
|
* camera. Nothing else uses interrupts, though, as of this writing.
|
|
* Should that situation change, we'll have to improve support at
|
|
* the via-core level.
|
|
*/
|
|
static void viacam_int_enable(struct via_camera *cam)
|
|
{
|
|
viacam_write_reg(cam, VCR_INTCTRL,
|
|
VCR_IC_INTEN|VCR_IC_EAV|VCR_IC_EVBI|VCR_IC_FFULL);
|
|
viafb_irq_enable(VDE_I_C0AVEN);
|
|
}
|
|
|
|
static void viacam_int_disable(struct via_camera *cam)
|
|
{
|
|
viafb_irq_disable(VDE_I_C0AVEN);
|
|
viacam_write_reg(cam, VCR_INTCTRL, 0);
|
|
}
|
|
|
|
|
|
|
|
/* --------------------------------------------------------------------------*/
|
|
/* Controller operations */
|
|
|
|
/*
|
|
* Set up our capture buffers in framebuffer memory.
|
|
*/
|
|
static int viacam_ctlr_cbufs(struct via_camera *cam)
|
|
{
|
|
int nbuf = cam->viadev->camera_fbmem_size/cam->sensor_format.sizeimage;
|
|
int i;
|
|
unsigned int offset;
|
|
|
|
/*
|
|
* See how many buffers we can work with.
|
|
*/
|
|
if (nbuf >= 3) {
|
|
cam->n_cap_bufs = 3;
|
|
viacam_write_reg_mask(cam, VCR_CAPINTC, VCR_CI_3BUFS,
|
|
VCR_CI_3BUFS);
|
|
} else if (nbuf == 2) {
|
|
cam->n_cap_bufs = 2;
|
|
viacam_write_reg_mask(cam, VCR_CAPINTC, 0, VCR_CI_3BUFS);
|
|
} else {
|
|
cam_warn(cam, "Insufficient frame buffer memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
/*
|
|
* Set them up.
|
|
*/
|
|
offset = cam->fb_offset;
|
|
for (i = 0; i < cam->n_cap_bufs; i++) {
|
|
cam->cb_offsets[i] = offset;
|
|
cam->cb_addrs[i] = cam->fbmem + offset;
|
|
viacam_write_reg(cam, VCR_VBUF1 + i*4, offset & VCR_VBUF_MASK);
|
|
offset += cam->sensor_format.sizeimage;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the scaling register for downscaling the image.
|
|
*
|
|
* This register works like this... Vertical scaling is enabled
|
|
* by bit 26; if that bit is set, downscaling is controlled by the
|
|
* value in bits 16:25. Those bits are divided by 1024 to get
|
|
* the scaling factor; setting just bit 25 thus cuts the height
|
|
* in half.
|
|
*
|
|
* Horizontal scaling works about the same, but it's enabled by
|
|
* bit 11, with bits 0:10 giving the numerator of a fraction
|
|
* (over 2048) for the scaling value.
|
|
*
|
|
* This function is naive in that, if the user departs from
|
|
* the 3x4 VGA scaling factor, the image will distort. We
|
|
* could work around that if it really seemed important.
|
|
*/
|
|
static void viacam_set_scale(struct via_camera *cam)
|
|
{
|
|
unsigned int avscale;
|
|
int sf;
|
|
|
|
if (cam->user_format.width == VGA_WIDTH)
|
|
avscale = 0;
|
|
else {
|
|
sf = (cam->user_format.width*2048)/VGA_WIDTH;
|
|
avscale = VCR_AVS_HEN | sf;
|
|
}
|
|
if (cam->user_format.height < VGA_HEIGHT) {
|
|
sf = (1024*cam->user_format.height)/VGA_HEIGHT;
|
|
avscale |= VCR_AVS_VEN | (sf << 16);
|
|
}
|
|
viacam_write_reg(cam, VCR_AVSCALE, avscale);
|
|
}
|
|
|
|
|
|
/*
|
|
* Configure image-related information into the capture engine.
|
|
*/
|
|
static void viacam_ctlr_image(struct via_camera *cam)
|
|
{
|
|
int cicreg;
|
|
|
|
/*
|
|
* Disable clock before messing with stuff - from the via
|
|
* sample driver.
|
|
*/
|
|
viacam_write_reg(cam, VCR_CAPINTC, ~(VCR_CI_ENABLE|VCR_CI_CLKEN));
|
|
/*
|
|
* Set up the controller for VGA resolution, modulo magic
|
|
* offsets from the via sample driver.
|
|
*/
|
|
viacam_write_reg(cam, VCR_HORRANGE, 0x06200120);
|
|
viacam_write_reg(cam, VCR_VERTRANGE, 0x01de0000);
|
|
viacam_set_scale(cam);
|
|
/*
|
|
* Image size info.
|
|
*/
|
|
viacam_write_reg(cam, VCR_MAXDATA,
|
|
(cam->sensor_format.height << 16) |
|
|
(cam->sensor_format.bytesperline >> 3));
|
|
viacam_write_reg(cam, VCR_MAXVBI, 0);
|
|
viacam_write_reg(cam, VCR_VSTRIDE,
|
|
cam->user_format.bytesperline & VCR_VS_STRIDE);
|
|
/*
|
|
* Set up the capture interface control register,
|
|
* everything but the "go" bit.
|
|
*
|
|
* The FIFO threshold is a bit of a magic number; 8 is what
|
|
* VIA's sample code uses.
|
|
*/
|
|
cicreg = VCR_CI_CLKEN |
|
|
0x08000000 | /* FIFO threshold */
|
|
VCR_CI_FLDINV | /* OLPC-specific? */
|
|
VCR_CI_VREFINV | /* OLPC-specific? */
|
|
VCR_CI_DIBOTH | /* Capture both fields */
|
|
VCR_CI_CCIR601_8;
|
|
if (cam->n_cap_bufs == 3)
|
|
cicreg |= VCR_CI_3BUFS;
|
|
/*
|
|
* YUV formats need different byte swapping than RGB.
|
|
*/
|
|
if (cam->user_format.pixelformat == V4L2_PIX_FMT_YUYV)
|
|
cicreg |= VCR_CI_YUYV;
|
|
else
|
|
cicreg |= VCR_CI_UYVY;
|
|
viacam_write_reg(cam, VCR_CAPINTC, cicreg);
|
|
}
|
|
|
|
|
|
static int viacam_config_controller(struct via_camera *cam)
|
|
{
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&cam->viadev->reg_lock, flags);
|
|
ret = viacam_ctlr_cbufs(cam);
|
|
if (!ret)
|
|
viacam_ctlr_image(cam);
|
|
spin_unlock_irqrestore(&cam->viadev->reg_lock, flags);
|
|
clear_bit(CF_CONFIG_NEEDED, &cam->flags);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Make it start grabbing data.
|
|
*/
|
|
static void viacam_start_engine(struct via_camera *cam)
|
|
{
|
|
spin_lock_irq(&cam->viadev->reg_lock);
|
|
viacam_write_reg_mask(cam, VCR_CAPINTC, VCR_CI_ENABLE, VCR_CI_ENABLE);
|
|
viacam_int_enable(cam);
|
|
(void) viacam_read_reg(cam, VCR_CAPINTC); /* Force post */
|
|
cam->opstate = S_RUNNING;
|
|
spin_unlock_irq(&cam->viadev->reg_lock);
|
|
}
|
|
|
|
|
|
static void viacam_stop_engine(struct via_camera *cam)
|
|
{
|
|
spin_lock_irq(&cam->viadev->reg_lock);
|
|
viacam_int_disable(cam);
|
|
viacam_write_reg_mask(cam, VCR_CAPINTC, 0, VCR_CI_ENABLE);
|
|
(void) viacam_read_reg(cam, VCR_CAPINTC); /* Force post */
|
|
cam->opstate = S_IDLE;
|
|
spin_unlock_irq(&cam->viadev->reg_lock);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------------*/
|
|
/* vb2 callback ops */
|
|
|
|
static struct via_buffer *vb2_to_via_buffer(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
|
|
return container_of(vbuf, struct via_buffer, vbuf);
|
|
}
|
|
|
|
static void viacam_vb2_queue(struct vb2_buffer *vb)
|
|
{
|
|
struct via_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
|
|
struct via_buffer *via = vb2_to_via_buffer(vb);
|
|
|
|
list_add_tail(&via->queue, &cam->buffer_queue);
|
|
}
|
|
|
|
static int viacam_vb2_prepare(struct vb2_buffer *vb)
|
|
{
|
|
struct via_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
|
|
|
|
if (vb2_plane_size(vb, 0) < cam->user_format.sizeimage) {
|
|
cam_dbg(cam,
|
|
"Plane size too small (%lu < %u)\n",
|
|
vb2_plane_size(vb, 0),
|
|
cam->user_format.sizeimage);
|
|
return -EINVAL;
|
|
}
|
|
|
|
vb2_set_plane_payload(vb, 0, cam->user_format.sizeimage);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int viacam_vb2_queue_setup(struct vb2_queue *vq,
|
|
unsigned int *nbufs,
|
|
unsigned int *num_planes, unsigned int sizes[],
|
|
struct device *alloc_devs[])
|
|
{
|
|
struct via_camera *cam = vb2_get_drv_priv(vq);
|
|
int size = cam->user_format.sizeimage;
|
|
|
|
if (*num_planes)
|
|
return sizes[0] < size ? -EINVAL : 0;
|
|
|
|
*num_planes = 1;
|
|
sizes[0] = size;
|
|
return 0;
|
|
}
|
|
|
|
static int viacam_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
|
|
{
|
|
struct via_camera *cam = vb2_get_drv_priv(vq);
|
|
struct via_buffer *buf, *tmp;
|
|
int ret = 0;
|
|
|
|
if (cam->opstate != S_IDLE) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
/*
|
|
* Configure things if need be.
|
|
*/
|
|
if (test_bit(CF_CONFIG_NEEDED, &cam->flags)) {
|
|
ret = viacam_configure_sensor(cam);
|
|
if (ret)
|
|
goto out;
|
|
ret = viacam_config_controller(cam);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
cam->sequence = 0;
|
|
/*
|
|
* If the CPU goes into C3, the DMA transfer gets corrupted and
|
|
* users start filing unsightly bug reports. Put in a "latency"
|
|
* requirement which will keep the CPU out of the deeper sleep
|
|
* states.
|
|
*/
|
|
pm_qos_add_request(&cam->qos_request, PM_QOS_CPU_DMA_LATENCY, 50);
|
|
viacam_start_engine(cam);
|
|
return 0;
|
|
out:
|
|
list_for_each_entry_safe(buf, tmp, &cam->buffer_queue, queue) {
|
|
list_del(&buf->queue);
|
|
vb2_buffer_done(&buf->vbuf.vb2_buf, VB2_BUF_STATE_QUEUED);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void viacam_vb2_stop_streaming(struct vb2_queue *vq)
|
|
{
|
|
struct via_camera *cam = vb2_get_drv_priv(vq);
|
|
struct via_buffer *buf, *tmp;
|
|
|
|
pm_qos_remove_request(&cam->qos_request);
|
|
viacam_stop_engine(cam);
|
|
|
|
list_for_each_entry_safe(buf, tmp, &cam->buffer_queue, queue) {
|
|
list_del(&buf->queue);
|
|
vb2_buffer_done(&buf->vbuf.vb2_buf, VB2_BUF_STATE_ERROR);
|
|
}
|
|
}
|
|
|
|
static const struct vb2_ops viacam_vb2_ops = {
|
|
.queue_setup = viacam_vb2_queue_setup,
|
|
.buf_queue = viacam_vb2_queue,
|
|
.buf_prepare = viacam_vb2_prepare,
|
|
.start_streaming = viacam_vb2_start_streaming,
|
|
.stop_streaming = viacam_vb2_stop_streaming,
|
|
.wait_prepare = vb2_ops_wait_prepare,
|
|
.wait_finish = vb2_ops_wait_finish,
|
|
};
|
|
|
|
/* --------------------------------------------------------------------------*/
|
|
/* File operations */
|
|
|
|
static int viacam_open(struct file *filp)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
int ret;
|
|
|
|
/*
|
|
* Note the new user. If this is the first one, we'll also
|
|
* need to power up the sensor.
|
|
*/
|
|
mutex_lock(&cam->lock);
|
|
ret = v4l2_fh_open(filp);
|
|
if (ret)
|
|
goto out;
|
|
if (v4l2_fh_is_singular_file(filp)) {
|
|
ret = viafb_request_dma();
|
|
|
|
if (ret) {
|
|
v4l2_fh_release(filp);
|
|
goto out;
|
|
}
|
|
via_sensor_power_up(cam);
|
|
set_bit(CF_CONFIG_NEEDED, &cam->flags);
|
|
}
|
|
out:
|
|
mutex_unlock(&cam->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int viacam_release(struct file *filp)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
bool last_open;
|
|
|
|
mutex_lock(&cam->lock);
|
|
last_open = v4l2_fh_is_singular_file(filp);
|
|
_vb2_fop_release(filp, NULL);
|
|
/*
|
|
* Last one out needs to turn out the lights.
|
|
*/
|
|
if (last_open) {
|
|
via_sensor_power_down(cam);
|
|
viafb_release_dma();
|
|
}
|
|
mutex_unlock(&cam->lock);
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_file_operations viacam_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = viacam_open,
|
|
.release = viacam_release,
|
|
.read = vb2_fop_read,
|
|
.poll = vb2_fop_poll,
|
|
.mmap = vb2_fop_mmap,
|
|
.unlocked_ioctl = video_ioctl2,
|
|
};
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/*
|
|
* The long list of v4l2 ioctl ops
|
|
*/
|
|
|
|
/*
|
|
* Only one input.
|
|
*/
|
|
static int viacam_enum_input(struct file *filp, void *priv,
|
|
struct v4l2_input *input)
|
|
{
|
|
if (input->index != 0)
|
|
return -EINVAL;
|
|
|
|
input->type = V4L2_INPUT_TYPE_CAMERA;
|
|
strscpy(input->name, "Camera", sizeof(input->name));
|
|
return 0;
|
|
}
|
|
|
|
static int viacam_g_input(struct file *filp, void *priv, unsigned int *i)
|
|
{
|
|
*i = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int viacam_s_input(struct file *filp, void *priv, unsigned int i)
|
|
{
|
|
if (i != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Video format stuff. Here is our default format until
|
|
* user space messes with things.
|
|
*/
|
|
static const struct v4l2_pix_format viacam_def_pix_format = {
|
|
.width = VGA_WIDTH,
|
|
.height = VGA_HEIGHT,
|
|
.pixelformat = V4L2_PIX_FMT_YUYV,
|
|
.field = V4L2_FIELD_NONE,
|
|
.bytesperline = VGA_WIDTH * 2,
|
|
.sizeimage = VGA_WIDTH * VGA_HEIGHT * 2,
|
|
.colorspace = V4L2_COLORSPACE_SRGB,
|
|
};
|
|
|
|
static const u32 via_def_mbus_code = MEDIA_BUS_FMT_YUYV8_2X8;
|
|
|
|
static int viacam_enum_fmt_vid_cap(struct file *filp, void *priv,
|
|
struct v4l2_fmtdesc *fmt)
|
|
{
|
|
if (fmt->index >= N_VIA_FMTS)
|
|
return -EINVAL;
|
|
fmt->pixelformat = via_formats[fmt->index].pixelformat;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Figure out proper image dimensions, but always force the
|
|
* sensor to VGA.
|
|
*/
|
|
static void viacam_fmt_pre(struct v4l2_pix_format *userfmt,
|
|
struct v4l2_pix_format *sensorfmt)
|
|
{
|
|
*sensorfmt = *userfmt;
|
|
if (userfmt->width < QCIF_WIDTH || userfmt->height < QCIF_HEIGHT) {
|
|
userfmt->width = QCIF_WIDTH;
|
|
userfmt->height = QCIF_HEIGHT;
|
|
}
|
|
if (userfmt->width > VGA_WIDTH || userfmt->height > VGA_HEIGHT) {
|
|
userfmt->width = VGA_WIDTH;
|
|
userfmt->height = VGA_HEIGHT;
|
|
}
|
|
sensorfmt->width = VGA_WIDTH;
|
|
sensorfmt->height = VGA_HEIGHT;
|
|
}
|
|
|
|
static void viacam_fmt_post(struct v4l2_pix_format *userfmt,
|
|
struct v4l2_pix_format *sensorfmt)
|
|
{
|
|
struct via_format *f = via_find_format(userfmt->pixelformat);
|
|
|
|
sensorfmt->bytesperline = sensorfmt->width * f->bpp;
|
|
sensorfmt->sizeimage = sensorfmt->height * sensorfmt->bytesperline;
|
|
userfmt->pixelformat = sensorfmt->pixelformat;
|
|
userfmt->field = sensorfmt->field;
|
|
userfmt->bytesperline = 2 * userfmt->width;
|
|
userfmt->sizeimage = userfmt->bytesperline * userfmt->height;
|
|
userfmt->colorspace = sensorfmt->colorspace;
|
|
userfmt->ycbcr_enc = sensorfmt->ycbcr_enc;
|
|
userfmt->quantization = sensorfmt->quantization;
|
|
userfmt->xfer_func = sensorfmt->xfer_func;
|
|
}
|
|
|
|
|
|
/*
|
|
* The real work of figuring out a workable format.
|
|
*/
|
|
static int viacam_do_try_fmt(struct via_camera *cam,
|
|
struct v4l2_pix_format *upix, struct v4l2_pix_format *spix)
|
|
{
|
|
int ret;
|
|
struct v4l2_subdev_pad_config pad_cfg;
|
|
struct v4l2_subdev_format format = {
|
|
.which = V4L2_SUBDEV_FORMAT_TRY,
|
|
};
|
|
struct via_format *f = via_find_format(upix->pixelformat);
|
|
|
|
upix->pixelformat = f->pixelformat;
|
|
viacam_fmt_pre(upix, spix);
|
|
v4l2_fill_mbus_format(&format.format, spix, f->mbus_code);
|
|
ret = sensor_call(cam, pad, set_fmt, &pad_cfg, &format);
|
|
v4l2_fill_pix_format(spix, &format.format);
|
|
viacam_fmt_post(upix, spix);
|
|
return ret;
|
|
}
|
|
|
|
|
|
|
|
static int viacam_try_fmt_vid_cap(struct file *filp, void *priv,
|
|
struct v4l2_format *fmt)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
struct v4l2_format sfmt;
|
|
|
|
return viacam_do_try_fmt(cam, &fmt->fmt.pix, &sfmt.fmt.pix);
|
|
}
|
|
|
|
|
|
static int viacam_g_fmt_vid_cap(struct file *filp, void *priv,
|
|
struct v4l2_format *fmt)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
|
|
fmt->fmt.pix = cam->user_format;
|
|
return 0;
|
|
}
|
|
|
|
static int viacam_s_fmt_vid_cap(struct file *filp, void *priv,
|
|
struct v4l2_format *fmt)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
int ret;
|
|
struct v4l2_format sfmt;
|
|
struct via_format *f = via_find_format(fmt->fmt.pix.pixelformat);
|
|
|
|
/*
|
|
* Camera must be idle or we can't mess with the
|
|
* video setup.
|
|
*/
|
|
if (cam->opstate != S_IDLE)
|
|
return -EBUSY;
|
|
/*
|
|
* Let the sensor code look over and tweak the
|
|
* requested formatting.
|
|
*/
|
|
ret = viacam_do_try_fmt(cam, &fmt->fmt.pix, &sfmt.fmt.pix);
|
|
if (ret)
|
|
return ret;
|
|
/*
|
|
* OK, let's commit to the new format.
|
|
*/
|
|
cam->user_format = fmt->fmt.pix;
|
|
cam->sensor_format = sfmt.fmt.pix;
|
|
cam->mbus_code = f->mbus_code;
|
|
ret = viacam_configure_sensor(cam);
|
|
if (!ret)
|
|
ret = viacam_config_controller(cam);
|
|
return ret;
|
|
}
|
|
|
|
static int viacam_querycap(struct file *filp, void *priv,
|
|
struct v4l2_capability *cap)
|
|
{
|
|
strscpy(cap->driver, "via-camera", sizeof(cap->driver));
|
|
strscpy(cap->card, "via-camera", sizeof(cap->card));
|
|
strscpy(cap->bus_info, "platform:via-camera", sizeof(cap->bus_info));
|
|
return 0;
|
|
}
|
|
|
|
/* G/S_PARM */
|
|
|
|
static int viacam_g_parm(struct file *filp, void *priv,
|
|
struct v4l2_streamparm *parm)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
|
|
return v4l2_g_parm_cap(video_devdata(filp), cam->sensor, parm);
|
|
}
|
|
|
|
static int viacam_s_parm(struct file *filp, void *priv,
|
|
struct v4l2_streamparm *parm)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
|
|
return v4l2_s_parm_cap(video_devdata(filp), cam->sensor, parm);
|
|
}
|
|
|
|
static int viacam_enum_framesizes(struct file *filp, void *priv,
|
|
struct v4l2_frmsizeenum *sizes)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (sizes->index != 0)
|
|
return -EINVAL;
|
|
for (i = 0; i < N_VIA_FMTS; i++)
|
|
if (sizes->pixel_format == via_formats[i].pixelformat)
|
|
break;
|
|
if (i >= N_VIA_FMTS)
|
|
return -EINVAL;
|
|
sizes->type = V4L2_FRMSIZE_TYPE_CONTINUOUS;
|
|
sizes->stepwise.min_width = QCIF_WIDTH;
|
|
sizes->stepwise.min_height = QCIF_HEIGHT;
|
|
sizes->stepwise.max_width = VGA_WIDTH;
|
|
sizes->stepwise.max_height = VGA_HEIGHT;
|
|
sizes->stepwise.step_width = sizes->stepwise.step_height = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int viacam_enum_frameintervals(struct file *filp, void *priv,
|
|
struct v4l2_frmivalenum *interval)
|
|
{
|
|
struct via_camera *cam = video_drvdata(filp);
|
|
struct v4l2_subdev_frame_interval_enum fie = {
|
|
.index = interval->index,
|
|
.code = cam->mbus_code,
|
|
.width = cam->sensor_format.width,
|
|
.height = cam->sensor_format.height,
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
};
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < N_VIA_FMTS; i++)
|
|
if (interval->pixel_format == via_formats[i].pixelformat)
|
|
break;
|
|
if (i >= N_VIA_FMTS)
|
|
return -EINVAL;
|
|
if (interval->width < QCIF_WIDTH || interval->width > VGA_WIDTH ||
|
|
interval->height < QCIF_HEIGHT || interval->height > VGA_HEIGHT)
|
|
return -EINVAL;
|
|
ret = sensor_call(cam, pad, enum_frame_interval, NULL, &fie);
|
|
if (ret)
|
|
return ret;
|
|
interval->type = V4L2_FRMIVAL_TYPE_DISCRETE;
|
|
interval->discrete = fie.interval;
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_ioctl_ops viacam_ioctl_ops = {
|
|
.vidioc_enum_input = viacam_enum_input,
|
|
.vidioc_g_input = viacam_g_input,
|
|
.vidioc_s_input = viacam_s_input,
|
|
.vidioc_enum_fmt_vid_cap = viacam_enum_fmt_vid_cap,
|
|
.vidioc_try_fmt_vid_cap = viacam_try_fmt_vid_cap,
|
|
.vidioc_g_fmt_vid_cap = viacam_g_fmt_vid_cap,
|
|
.vidioc_s_fmt_vid_cap = viacam_s_fmt_vid_cap,
|
|
.vidioc_querycap = viacam_querycap,
|
|
.vidioc_reqbufs = vb2_ioctl_reqbufs,
|
|
.vidioc_create_bufs = vb2_ioctl_create_bufs,
|
|
.vidioc_querybuf = vb2_ioctl_querybuf,
|
|
.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
|
|
.vidioc_qbuf = vb2_ioctl_qbuf,
|
|
.vidioc_dqbuf = vb2_ioctl_dqbuf,
|
|
.vidioc_expbuf = vb2_ioctl_expbuf,
|
|
.vidioc_streamon = vb2_ioctl_streamon,
|
|
.vidioc_streamoff = vb2_ioctl_streamoff,
|
|
.vidioc_g_parm = viacam_g_parm,
|
|
.vidioc_s_parm = viacam_s_parm,
|
|
.vidioc_enum_framesizes = viacam_enum_framesizes,
|
|
.vidioc_enum_frameintervals = viacam_enum_frameintervals,
|
|
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
|
|
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
|
|
};
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Power management.
|
|
*/
|
|
#ifdef CONFIG_PM
|
|
|
|
static int viacam_suspend(void *priv)
|
|
{
|
|
struct via_camera *cam = priv;
|
|
enum viacam_opstate state = cam->opstate;
|
|
|
|
if (cam->opstate != S_IDLE) {
|
|
viacam_stop_engine(cam);
|
|
cam->opstate = state; /* So resume restarts */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int viacam_resume(void *priv)
|
|
{
|
|
struct via_camera *cam = priv;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* Get back to a reasonable operating state.
|
|
*/
|
|
via_write_reg_mask(VIASR, 0x78, 0, 0x80);
|
|
via_write_reg_mask(VIASR, 0x1e, 0xc0, 0xc0);
|
|
viacam_int_disable(cam);
|
|
set_bit(CF_CONFIG_NEEDED, &cam->flags);
|
|
/*
|
|
* Make sure the sensor's power state is correct
|
|
*/
|
|
if (!list_empty(&cam->vdev.fh_list))
|
|
via_sensor_power_up(cam);
|
|
else
|
|
via_sensor_power_down(cam);
|
|
/*
|
|
* If it was operating, try to restart it.
|
|
*/
|
|
if (cam->opstate != S_IDLE) {
|
|
mutex_lock(&cam->lock);
|
|
ret = viacam_configure_sensor(cam);
|
|
if (!ret)
|
|
ret = viacam_config_controller(cam);
|
|
mutex_unlock(&cam->lock);
|
|
if (!ret)
|
|
viacam_start_engine(cam);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct viafb_pm_hooks viacam_pm_hooks = {
|
|
.suspend = viacam_suspend,
|
|
.resume = viacam_resume
|
|
};
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*
|
|
* Setup stuff.
|
|
*/
|
|
|
|
static const struct video_device viacam_v4l_template = {
|
|
.name = "via-camera",
|
|
.minor = -1,
|
|
.fops = &viacam_fops,
|
|
.ioctl_ops = &viacam_ioctl_ops,
|
|
.release = video_device_release_empty, /* Check this */
|
|
.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
|
|
V4L2_CAP_STREAMING,
|
|
};
|
|
|
|
/*
|
|
* The OLPC folks put the serial port on the same pin as
|
|
* the camera. They also get grumpy if we break the
|
|
* serial port and keep them from using it. So we have
|
|
* to check the serial enable bit and not step on it.
|
|
*/
|
|
#define VIACAM_SERIAL_DEVFN 0x88
|
|
#define VIACAM_SERIAL_CREG 0x46
|
|
#define VIACAM_SERIAL_BIT 0x40
|
|
|
|
static bool viacam_serial_is_enabled(void)
|
|
{
|
|
struct pci_bus *pbus = pci_find_bus(0, 0);
|
|
u8 cbyte;
|
|
|
|
if (!pbus)
|
|
return false;
|
|
pci_bus_read_config_byte(pbus, VIACAM_SERIAL_DEVFN,
|
|
VIACAM_SERIAL_CREG, &cbyte);
|
|
if ((cbyte & VIACAM_SERIAL_BIT) == 0)
|
|
return false; /* Not enabled */
|
|
if (!override_serial) {
|
|
printk(KERN_NOTICE "Via camera: serial port is enabled, " \
|
|
"refusing to load.\n");
|
|
printk(KERN_NOTICE "Specify override_serial=1 to force " \
|
|
"module loading.\n");
|
|
return true;
|
|
}
|
|
printk(KERN_NOTICE "Via camera: overriding serial port\n");
|
|
pci_bus_write_config_byte(pbus, VIACAM_SERIAL_DEVFN,
|
|
VIACAM_SERIAL_CREG, cbyte & ~VIACAM_SERIAL_BIT);
|
|
return false;
|
|
}
|
|
|
|
static struct ov7670_config sensor_cfg = {
|
|
/* The XO-1.5 (only known user) clocks the camera at 90MHz. */
|
|
.clock_speed = 90,
|
|
};
|
|
|
|
static int viacam_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct i2c_adapter *sensor_adapter;
|
|
struct viafb_dev *viadev = pdev->dev.platform_data;
|
|
struct vb2_queue *vq;
|
|
struct i2c_board_info ov7670_info = {
|
|
.type = "ov7670",
|
|
.addr = 0x42 >> 1,
|
|
.platform_data = &sensor_cfg,
|
|
};
|
|
|
|
/*
|
|
* Note that there are actually two capture channels on
|
|
* the device. We only deal with one for now. That
|
|
* is encoded here; nothing else assumes it's dealing with
|
|
* a unique capture device.
|
|
*/
|
|
struct via_camera *cam;
|
|
|
|
/*
|
|
* Ensure that frame buffer memory has been set aside for
|
|
* this purpose. As an arbitrary limit, refuse to work
|
|
* with less than two frames of VGA 16-bit data.
|
|
*
|
|
* If we ever support the second port, we'll need to set
|
|
* aside more memory.
|
|
*/
|
|
if (viadev->camera_fbmem_size < (VGA_HEIGHT*VGA_WIDTH*4)) {
|
|
printk(KERN_ERR "viacam: insufficient FB memory reserved\n");
|
|
return -ENOMEM;
|
|
}
|
|
if (viadev->engine_mmio == NULL) {
|
|
printk(KERN_ERR "viacam: No I/O memory, so no pictures\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (machine_is_olpc() && viacam_serial_is_enabled())
|
|
return -EBUSY;
|
|
|
|
/*
|
|
* Basic structure initialization.
|
|
*/
|
|
cam = kzalloc (sizeof(struct via_camera), GFP_KERNEL);
|
|
if (cam == NULL)
|
|
return -ENOMEM;
|
|
via_cam_info = cam;
|
|
cam->platdev = pdev;
|
|
cam->viadev = viadev;
|
|
cam->opstate = S_IDLE;
|
|
cam->user_format = cam->sensor_format = viacam_def_pix_format;
|
|
mutex_init(&cam->lock);
|
|
INIT_LIST_HEAD(&cam->buffer_queue);
|
|
cam->mmio = viadev->engine_mmio;
|
|
cam->fbmem = viadev->fbmem;
|
|
cam->fb_offset = viadev->camera_fbmem_offset;
|
|
cam->flags = 1 << CF_CONFIG_NEEDED;
|
|
cam->mbus_code = via_def_mbus_code;
|
|
/*
|
|
* Tell V4L that we exist.
|
|
*/
|
|
ret = v4l2_device_register(&pdev->dev, &cam->v4l2_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to register v4l2 device\n");
|
|
goto out_free;
|
|
}
|
|
ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10);
|
|
if (ret)
|
|
goto out_unregister;
|
|
cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler;
|
|
/*
|
|
* Convince the system that we can do DMA.
|
|
*/
|
|
pdev->dev.dma_mask = &viadev->pdev->dma_mask;
|
|
dma_set_mask(&pdev->dev, 0xffffffff);
|
|
/*
|
|
* Fire up the capture port. The write to 0x78 looks purely
|
|
* OLPCish; any system will need to tweak 0x1e.
|
|
*/
|
|
via_write_reg_mask(VIASR, 0x78, 0, 0x80);
|
|
via_write_reg_mask(VIASR, 0x1e, 0xc0, 0xc0);
|
|
/*
|
|
* Get the sensor powered up.
|
|
*/
|
|
ret = via_sensor_power_setup(cam);
|
|
if (ret)
|
|
goto out_ctrl_hdl_free;
|
|
via_sensor_power_up(cam);
|
|
|
|
/*
|
|
* See if we can't find it on the bus. The VIA_PORT_31 assumption
|
|
* is OLPC-specific. 0x42 assumption is ov7670-specific.
|
|
*/
|
|
sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31);
|
|
cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, sensor_adapter,
|
|
&ov7670_info, NULL);
|
|
if (cam->sensor == NULL) {
|
|
dev_err(&pdev->dev, "Unable to find the sensor!\n");
|
|
ret = -ENODEV;
|
|
goto out_power_down;
|
|
}
|
|
/*
|
|
* Get the IRQ.
|
|
*/
|
|
viacam_int_disable(cam);
|
|
ret = request_threaded_irq(viadev->pdev->irq, viacam_quick_irq,
|
|
viacam_irq, IRQF_SHARED, "via-camera", cam);
|
|
if (ret)
|
|
goto out_power_down;
|
|
|
|
vq = &cam->vq;
|
|
vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
|
|
vq->drv_priv = cam;
|
|
vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
|
|
vq->buf_struct_size = sizeof(struct via_buffer);
|
|
vq->dev = cam->v4l2_dev.dev;
|
|
|
|
vq->ops = &viacam_vb2_ops;
|
|
vq->mem_ops = &vb2_dma_sg_memops;
|
|
vq->lock = &cam->lock;
|
|
|
|
ret = vb2_queue_init(vq);
|
|
/*
|
|
* Tell V4l2 that we exist.
|
|
*/
|
|
cam->vdev = viacam_v4l_template;
|
|
cam->vdev.v4l2_dev = &cam->v4l2_dev;
|
|
cam->vdev.lock = &cam->lock;
|
|
cam->vdev.queue = vq;
|
|
video_set_drvdata(&cam->vdev, cam);
|
|
ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
|
|
if (ret)
|
|
goto out_irq;
|
|
|
|
#ifdef CONFIG_PM
|
|
/*
|
|
* Hook into PM events
|
|
*/
|
|
viacam_pm_hooks.private = cam;
|
|
viafb_pm_register(&viacam_pm_hooks);
|
|
#endif
|
|
|
|
/* Power the sensor down until somebody opens the device */
|
|
via_sensor_power_down(cam);
|
|
return 0;
|
|
|
|
out_irq:
|
|
free_irq(viadev->pdev->irq, cam);
|
|
out_power_down:
|
|
via_sensor_power_release(cam);
|
|
out_ctrl_hdl_free:
|
|
v4l2_ctrl_handler_free(&cam->ctrl_handler);
|
|
out_unregister:
|
|
v4l2_device_unregister(&cam->v4l2_dev);
|
|
out_free:
|
|
kfree(cam);
|
|
return ret;
|
|
}
|
|
|
|
static int viacam_remove(struct platform_device *pdev)
|
|
{
|
|
struct via_camera *cam = via_cam_info;
|
|
struct viafb_dev *viadev = pdev->dev.platform_data;
|
|
|
|
video_unregister_device(&cam->vdev);
|
|
v4l2_device_unregister(&cam->v4l2_dev);
|
|
#ifdef CONFIG_PM
|
|
viafb_pm_unregister(&viacam_pm_hooks);
|
|
#endif
|
|
free_irq(viadev->pdev->irq, cam);
|
|
via_sensor_power_release(cam);
|
|
v4l2_ctrl_handler_free(&cam->ctrl_handler);
|
|
kfree(cam);
|
|
via_cam_info = NULL;
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver viacam_driver = {
|
|
.driver = {
|
|
.name = "viafb-camera",
|
|
},
|
|
.probe = viacam_probe,
|
|
.remove = viacam_remove,
|
|
};
|
|
|
|
module_platform_driver(viacam_driver);
|