mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 17:24:17 +08:00
f0fba2ad1b
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
460 lines
13 KiB
C
460 lines
13 KiB
C
/*
|
|
* Texas Instruments TLV320AIC26 low power audio CODEC
|
|
* ALSA SoC CODEC driver
|
|
*
|
|
* Copyright (C) 2008 Secret Lab Technologies Ltd.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/device.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
|
|
#include "tlv320aic26.h"
|
|
|
|
MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver");
|
|
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* AIC26 driver private data */
|
|
struct aic26 {
|
|
struct spi_device *spi;
|
|
struct snd_soc_codec codec;
|
|
u16 reg_cache[AIC26_NUM_REGS]; /* shadow registers */
|
|
int master;
|
|
int datfm;
|
|
int mclk;
|
|
|
|
/* Keyclick parameters */
|
|
int keyclick_amplitude;
|
|
int keyclick_freq;
|
|
int keyclick_len;
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Register access routines
|
|
*/
|
|
static unsigned int aic26_reg_read(struct snd_soc_codec *codec,
|
|
unsigned int reg)
|
|
{
|
|
struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
|
|
u16 *cache = codec->reg_cache;
|
|
u16 cmd, value;
|
|
u8 buffer[2];
|
|
int rc;
|
|
|
|
if (reg >= AIC26_NUM_REGS) {
|
|
WARN_ON_ONCE(1);
|
|
return 0;
|
|
}
|
|
|
|
/* Do SPI transfer; first 16bits are command; remaining is
|
|
* register contents */
|
|
cmd = AIC26_READ_COMMAND_WORD(reg);
|
|
buffer[0] = (cmd >> 8) & 0xff;
|
|
buffer[1] = cmd & 0xff;
|
|
rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2);
|
|
if (rc) {
|
|
dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
|
|
return -EIO;
|
|
}
|
|
value = (buffer[0] << 8) | buffer[1];
|
|
|
|
/* Update the cache before returning with the value */
|
|
cache[reg] = value;
|
|
return value;
|
|
}
|
|
|
|
static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec,
|
|
unsigned int reg)
|
|
{
|
|
u16 *cache = codec->reg_cache;
|
|
|
|
if (reg >= AIC26_NUM_REGS) {
|
|
WARN_ON_ONCE(1);
|
|
return 0;
|
|
}
|
|
|
|
return cache[reg];
|
|
}
|
|
|
|
static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
|
|
u16 *cache = codec->reg_cache;
|
|
u16 cmd;
|
|
u8 buffer[4];
|
|
int rc;
|
|
|
|
if (reg >= AIC26_NUM_REGS) {
|
|
WARN_ON_ONCE(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Do SPI transfer; first 16bits are command; remaining is data
|
|
* to write into register */
|
|
cmd = AIC26_WRITE_COMMAND_WORD(reg);
|
|
buffer[0] = (cmd >> 8) & 0xff;
|
|
buffer[1] = cmd & 0xff;
|
|
buffer[2] = value >> 8;
|
|
buffer[3] = value;
|
|
rc = spi_write(aic26->spi, buffer, 4);
|
|
if (rc) {
|
|
dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* update cache before returning */
|
|
cache[reg] = value;
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Digital Audio Interface Operations
|
|
*/
|
|
static int aic26_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_codec *codec = rtd->codec;
|
|
struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
|
|
int fsref, divisor, wlen, pval, jval, dval, qval;
|
|
u16 reg;
|
|
|
|
dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n",
|
|
substream, params);
|
|
dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params),
|
|
params_format(params));
|
|
|
|
switch (params_rate(params)) {
|
|
case 8000: fsref = 48000; divisor = AIC26_DIV_6; break;
|
|
case 11025: fsref = 44100; divisor = AIC26_DIV_4; break;
|
|
case 12000: fsref = 48000; divisor = AIC26_DIV_4; break;
|
|
case 16000: fsref = 48000; divisor = AIC26_DIV_3; break;
|
|
case 22050: fsref = 44100; divisor = AIC26_DIV_2; break;
|
|
case 24000: fsref = 48000; divisor = AIC26_DIV_2; break;
|
|
case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break;
|
|
case 44100: fsref = 44100; divisor = AIC26_DIV_1; break;
|
|
case 48000: fsref = 48000; divisor = AIC26_DIV_1; break;
|
|
default:
|
|
dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL;
|
|
}
|
|
|
|
/* select data word length */
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break;
|
|
case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break;
|
|
case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break;
|
|
case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break;
|
|
default:
|
|
dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
|
|
}
|
|
|
|
/* Configure PLL */
|
|
pval = 1;
|
|
jval = (fsref == 44100) ? 7 : 8;
|
|
dval = (fsref == 44100) ? 5264 : 1920;
|
|
qval = 0;
|
|
reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
|
|
aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
|
|
reg = dval << 2;
|
|
aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg);
|
|
|
|
/* Audio Control 3 (master mode, fsref rate) */
|
|
reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3);
|
|
reg &= ~0xf800;
|
|
if (aic26->master)
|
|
reg |= 0x0800;
|
|
if (fsref == 48000)
|
|
reg |= 0x2000;
|
|
aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
|
|
|
|
/* Audio Control 1 (FSref divisor) */
|
|
reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1);
|
|
reg &= ~0x0fff;
|
|
reg |= wlen | aic26->datfm | (divisor << 3) | divisor;
|
|
aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* aic26_mute - Mute control to reduce noise when changing audio format
|
|
*/
|
|
static int aic26_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
|
|
u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN);
|
|
|
|
dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n",
|
|
dai, mute);
|
|
|
|
if (mute)
|
|
reg |= 0x8080;
|
|
else
|
|
reg &= ~0x8080;
|
|
aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic26_set_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i,"
|
|
" freq=%i, dir=%i)\n",
|
|
codec_dai, clk_id, freq, dir);
|
|
|
|
/* MCLK needs to fall between 2MHz and 50 MHz */
|
|
if ((freq < 2000000) || (freq > 50000000))
|
|
return -EINVAL;
|
|
|
|
aic26->mclk = freq;
|
|
return 0;
|
|
}
|
|
|
|
static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n",
|
|
codec_dai, fmt);
|
|
|
|
/* set master/slave audio interface */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break;
|
|
case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break;
|
|
default:
|
|
dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL;
|
|
}
|
|
|
|
/* interface format */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break;
|
|
case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break;
|
|
case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break;
|
|
case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break;
|
|
default:
|
|
dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Digital Audio Interface Definition
|
|
*/
|
|
#define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
|
|
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
|
|
SNDRV_PCM_RATE_48000)
|
|
#define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\
|
|
SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
|
|
|
|
static struct snd_soc_dai_ops aic26_dai_ops = {
|
|
.hw_params = aic26_hw_params,
|
|
.digital_mute = aic26_mute,
|
|
.set_sysclk = aic26_set_sysclk,
|
|
.set_fmt = aic26_set_fmt,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver aic26_dai = {
|
|
.name = "tlv320aic26-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = AIC26_RATES,
|
|
.formats = AIC26_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = AIC26_RATES,
|
|
.formats = AIC26_FORMATS,
|
|
},
|
|
.ops = &aic26_dai_ops,
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* ALSA controls
|
|
*/
|
|
static const char *aic26_capture_src_text[] = {"Mic", "Aux"};
|
|
static const struct soc_enum aic26_capture_src_enum =
|
|
SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text);
|
|
|
|
static const struct snd_kcontrol_new aic26_snd_controls[] = {
|
|
/* Output */
|
|
SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1),
|
|
SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1),
|
|
SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0),
|
|
SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1),
|
|
SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0),
|
|
SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0),
|
|
SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0),
|
|
SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0),
|
|
SOC_ENUM("Capture Source", aic26_capture_src_enum),
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* SPI device portion of driver: sysfs files for debugging
|
|
*/
|
|
|
|
static ssize_t aic26_keyclick_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct aic26 *aic26 = dev_get_drvdata(dev);
|
|
int val, amp, freq, len;
|
|
|
|
val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
|
|
amp = (val >> 12) & 0x7;
|
|
freq = (125 << ((val >> 8) & 0x7)) >> 1;
|
|
len = 2 * (1 + ((val >> 4) & 0xf));
|
|
|
|
return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len);
|
|
}
|
|
|
|
/* Any write to the keyclick attribute will trigger the keyclick event */
|
|
static ssize_t aic26_keyclick_set(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct aic26 *aic26 = dev_get_drvdata(dev);
|
|
int val;
|
|
|
|
val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
|
|
val |= 0x8000;
|
|
aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set);
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* SoC CODEC portion of driver: probe and release routines
|
|
*/
|
|
static int aic26_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec);
|
|
int ret, err, i, reg;
|
|
|
|
dev_info(codec->dev, "Probing AIC26 SoC CODEC driver\n");
|
|
|
|
/* Reset the codec to power on defaults */
|
|
aic26_reg_write(codec, AIC26_REG_RESET, 0xBB00);
|
|
|
|
/* Power up CODEC */
|
|
aic26_reg_write(codec, AIC26_REG_POWER_CTRL, 0);
|
|
|
|
/* Audio Control 3 (master mode, fsref rate) */
|
|
reg = aic26_reg_read(codec, AIC26_REG_AUDIO_CTRL3);
|
|
reg &= ~0xf800;
|
|
reg |= 0x0800; /* set master mode */
|
|
aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
|
|
|
|
/* Fill register cache */
|
|
for (i = 0; i < ARRAY_SIZE(aic26->reg_cache); i++)
|
|
aic26_reg_read(codec, i);
|
|
|
|
/* Register the sysfs files for debugging */
|
|
/* Create SysFS files */
|
|
ret = device_create_file(codec->dev, &dev_attr_keyclick);
|
|
if (ret)
|
|
dev_info(codec->dev, "error creating sysfs files\n");
|
|
|
|
/* register controls */
|
|
dev_dbg(codec->dev, "Registering controls\n");
|
|
err = snd_soc_add_controls(codec, aic26_snd_controls,
|
|
ARRAY_SIZE(aic26_snd_controls));
|
|
WARN_ON(err < 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec_driver aic26_soc_codec_dev = {
|
|
.probe = aic26_probe,
|
|
.read = aic26_reg_read,
|
|
.write = aic26_reg_write,
|
|
.reg_cache_size = AIC26_NUM_REGS,
|
|
.reg_word_size = sizeof(u16),
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* SPI device portion of driver: probe and release routines and SPI
|
|
* driver registration.
|
|
*/
|
|
static int aic26_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct aic26 *aic26;
|
|
int ret;
|
|
|
|
dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n");
|
|
|
|
/* Allocate driver data */
|
|
aic26 = kzalloc(sizeof *aic26, GFP_KERNEL);
|
|
if (!aic26)
|
|
return -ENOMEM;
|
|
|
|
/* Initialize the driver data */
|
|
aic26->spi = spi;
|
|
dev_set_drvdata(&spi->dev, aic26);
|
|
aic26->master = 1;
|
|
|
|
ret = snd_soc_register_codec(&spi->dev,
|
|
&aic26_soc_codec_dev, &aic26_dai, 1);
|
|
if (ret < 0)
|
|
kfree(aic26);
|
|
return ret;
|
|
|
|
dev_dbg(&spi->dev, "SPI device initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
static int aic26_spi_remove(struct spi_device *spi)
|
|
{
|
|
snd_soc_unregister_codec(&spi->dev);
|
|
kfree(spi_get_drvdata(spi));
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver aic26_spi = {
|
|
.driver = {
|
|
.name = "tlv320aic26-codec",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = aic26_spi_probe,
|
|
.remove = aic26_spi_remove,
|
|
};
|
|
|
|
static int __init aic26_init(void)
|
|
{
|
|
return spi_register_driver(&aic26_spi);
|
|
}
|
|
module_init(aic26_init);
|
|
|
|
static void __exit aic26_exit(void)
|
|
{
|
|
spi_unregister_driver(&aic26_spi);
|
|
}
|
|
module_exit(aic26_exit);
|