mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-30 07:34:12 +08:00
f68e4041ef
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support
for QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver.
-----BEGIN PGP SIGNATURE-----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=e5sV
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.11 kernel.
Drivers, drivers and drivers. Not a single core change.
Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
SoCs.
As part of the modularization attempt, I applied one patch affecting
the firmware subsystem as a functional (not syntactic/semantic)
dependency and then it blew up in our face, so I had to revert it,
bummer. It will come in later, through that subsystem, I guess.
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support for
QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver"
* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
pinctrl: qcom-pmic-gpio: Add support for pmx55
dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
pinctrl: mtk: Fix low level output voltage issue
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
pinctrl: at91-pio4: add support for fewer lines on last PIO bank
pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
...
456 lines
12 KiB
Plaintext
456 lines
12 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# PINCTRL infrastructure and drivers
|
|
#
|
|
|
|
menuconfig PINCTRL
|
|
bool "Pin controllers"
|
|
|
|
if PINCTRL
|
|
|
|
config GENERIC_PINCTRL_GROUPS
|
|
bool
|
|
|
|
config PINMUX
|
|
bool "Support pin multiplexing controllers" if COMPILE_TEST
|
|
|
|
config GENERIC_PINMUX_FUNCTIONS
|
|
bool
|
|
select PINMUX
|
|
|
|
config PINCONF
|
|
bool "Support pin configuration controllers" if COMPILE_TEST
|
|
|
|
config GENERIC_PINCONF
|
|
bool
|
|
select PINCONF
|
|
|
|
config DEBUG_PINCTRL
|
|
bool "Debug PINCTRL calls"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
|
|
|
|
config PINCTRL_ARTPEC6
|
|
bool "Axis ARTPEC-6 pin controller driver"
|
|
depends on MACH_ARTPEC6
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This is the driver for the Axis ARTPEC-6 pin controller. This driver
|
|
supports pin function multiplexing as well as pin bias and drive
|
|
strength configuration. Device tree integration instructions can be
|
|
found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
|
|
|
|
config PINCTRL_AS3722
|
|
tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
|
|
depends on MFD_AS3722 && GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
AS3722 device supports the configuration of GPIO pins for different
|
|
functionality. This driver supports the pinmux, push-pull and
|
|
open drain configuration for the GPIO pins of AS3722 devices. It also
|
|
supports the GPIO functionality through gpiolib.
|
|
|
|
config PINCTRL_AXP209
|
|
tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
|
|
depends on MFD_AXP20X
|
|
depends on OF
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
help
|
|
AXP PMICs provides multiple GPIOs that can be muxed for different
|
|
functions. This driver bundles a pinctrl driver to select the function
|
|
muxing and a GPIO driver to handle the GPIO when the GPIO function is
|
|
selected.
|
|
Say yes to enable pinctrl and GPIO support for the AXP209 PMIC
|
|
|
|
config PINCTRL_AT91
|
|
bool "AT91 pinctrl driver"
|
|
depends on OF
|
|
depends on ARCH_AT91
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say Y here to enable the at91 pinctrl driver
|
|
|
|
config PINCTRL_AT91PIO4
|
|
bool "AT91 PIO4 pinctrl driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
depends on ARCH_AT91 || COMPILE_TEST
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
|
|
controller available on sama5d2 SoC.
|
|
|
|
config PINCTRL_AMD
|
|
tristate "AMD GPIO pin control"
|
|
depends on HAS_IOMEM
|
|
depends on ACPI || COMPILE_TEST
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
help
|
|
driver for memory mapped GPIO functionality on AMD platforms
|
|
(x86 or arm).Most pins are usually muxed to some other
|
|
functionality by firmware,so only a small amount is available
|
|
for gpio use.
|
|
|
|
Requires ACPI/FDT device enumeration code to set up a platform
|
|
device.
|
|
|
|
config PINCTRL_BM1880
|
|
bool "Bitmain BM1880 Pinctrl driver"
|
|
depends on OF && (ARCH_BITMAIN || COMPILE_TEST)
|
|
default ARCH_BITMAIN
|
|
select PINMUX
|
|
help
|
|
Pinctrl driver for Bitmain BM1880 SoC.
|
|
|
|
config PINCTRL_DA850_PUPD
|
|
tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"
|
|
depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
help
|
|
Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
|
|
pullup/pulldown pin groups.
|
|
|
|
config PINCTRL_DA9062
|
|
tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support"
|
|
depends on MFD_DA9062
|
|
select GPIOLIB
|
|
help
|
|
The Dialog DA9062 PMIC provides multiple GPIOs that can be muxed for
|
|
different functions. This driver bundles a pinctrl driver to select the
|
|
function muxing and a GPIO driver to handle the GPIO when the GPIO
|
|
function is selected.
|
|
|
|
Say yes to enable pinctrl and GPIO support for the DA9062 PMIC.
|
|
|
|
config PINCTRL_DIGICOLOR
|
|
bool
|
|
depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
|
|
config PINCTRL_LANTIQ
|
|
bool
|
|
depends on LANTIQ
|
|
select PINMUX
|
|
select PINCONF
|
|
|
|
config PINCTRL_LPC18XX
|
|
bool "NXP LPC18XX/43XX SCU pinctrl driver"
|
|
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
|
|
default ARCH_LPC18XX
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
|
|
|
|
config PINCTRL_FALCON
|
|
bool
|
|
depends on SOC_FALCON
|
|
depends on PINCTRL_LANTIQ
|
|
|
|
config PINCTRL_GEMINI
|
|
bool
|
|
depends on ARCH_GEMINI
|
|
default ARCH_GEMINI
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select MFD_SYSCON
|
|
|
|
config PINCTRL_MCP23S08_I2C
|
|
tristate
|
|
select REGMAP_I2C
|
|
|
|
config PINCTRL_MCP23S08_SPI
|
|
tristate
|
|
select REGMAP_SPI
|
|
|
|
config PINCTRL_MCP23S08
|
|
tristate "Microchip MCP23xxx I/O expander"
|
|
depends on SPI_MASTER || I2C
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select PINCTRL_MCP23S08_I2C if I2C
|
|
select PINCTRL_MCP23S08_SPI if SPI_MASTER
|
|
help
|
|
SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
|
|
MCP23008 / MCP23017 / MCP23018 I/O expanders.
|
|
This provides a GPIO interface supporting inputs and outputs and a
|
|
corresponding interrupt-controller.
|
|
|
|
config PINCTRL_OXNAS
|
|
bool
|
|
depends on OF
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select GPIOLIB_IRQCHIP
|
|
select MFD_SYSCON
|
|
|
|
config PINCTRL_ROCKCHIP
|
|
bool
|
|
depends on OF
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GENERIC_IRQ_CHIP
|
|
select MFD_SYSCON
|
|
select OF_GPIO
|
|
|
|
config PINCTRL_SINGLE
|
|
tristate "One-register-per-pin type device tree based pinctrl driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the device tree based generic pinctrl driver.
|
|
|
|
config PINCTRL_SIRF
|
|
bool "CSR SiRFprimaII pin controller driver"
|
|
depends on ARCH_SIRF
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
|
|
config PINCTRL_SX150X
|
|
bool "Semtech SX150x I2C GPIO expander pinctrl driver"
|
|
depends on I2C=y
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select REGMAP
|
|
help
|
|
Say yes here to provide support for Semtech SX150x-series I2C
|
|
GPIO expanders as pinctrl module.
|
|
Compatible models include:
|
|
- 8 bits: sx1508q, sx1502q
|
|
- 16 bits: sx1509q, sx1506q
|
|
|
|
config PINCTRL_PISTACHIO
|
|
def_bool y if MACH_PISTACHIO
|
|
depends on GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
|
|
config PINCTRL_ST
|
|
bool
|
|
depends on OF
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
|
|
config PINCTRL_STMFX
|
|
tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
|
|
depends on I2C
|
|
depends on OF_GPIO
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select MFD_STMFX
|
|
help
|
|
Driver for STMicroelectronics Multi-Function eXpander (STMFX)
|
|
GPIO expander.
|
|
This provides a GPIO interface supporting inputs and outputs,
|
|
and configuring push-pull, open-drain, and can also be used as
|
|
interrupt-controller.
|
|
|
|
config PINCTRL_U300
|
|
bool "U300 pin controller driver"
|
|
depends on ARCH_U300
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
|
|
config PINCTRL_COH901
|
|
bool "ST-Ericsson U300 COH 901 335/571 GPIO"
|
|
depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say yes here to support GPIO interface on ST-Ericsson U300.
|
|
The names of the two IP block variants supported are
|
|
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
|
|
ports of 8 GPIO pins each.
|
|
|
|
config PINCTRL_MAX77620
|
|
tristate "MAX77620/MAX20024 Pincontrol support"
|
|
depends on MFD_MAX77620 && OF
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Say Yes here to enable Pin control support for Maxim PMIC MAX77620.
|
|
This PMIC has 8 GPIO pins that work as GPIO as well as special
|
|
function in alternate mode. This driver also configure push-pull,
|
|
open drain, FPS slots etc.
|
|
|
|
config PINCTRL_PALMAS
|
|
tristate "Pinctrl driver for the PALMAS Series MFD devices"
|
|
depends on OF && MFD_PALMAS
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Palmas device supports the configuration of pins for different
|
|
functionality. This driver supports the pinmux, push-pull and
|
|
open drain configuration for the Palmas series devices like
|
|
TPS65913, TPS80036 etc.
|
|
|
|
config PINCTRL_PIC32
|
|
bool "Microchip PIC32 pin controller driver"
|
|
depends on OF
|
|
depends on MACH_PIC32
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
This is the pin controller and gpio driver for Microchip PIC32
|
|
microcontrollers. This option is selected automatically when specific
|
|
machine and arch are selected to build.
|
|
|
|
config PINCTRL_PIC32MZDA
|
|
def_bool y if PIC32MZDA
|
|
select PINCTRL_PIC32
|
|
|
|
config PINCTRL_ZYNQ
|
|
bool "Pinctrl driver for Xilinx Zynq"
|
|
depends on ARCH_ZYNQ
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the pinctrl driver for Xilinx Zynq.
|
|
|
|
config PINCTRL_INGENIC
|
|
bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
|
|
default MACH_INGENIC
|
|
depends on OF
|
|
depends on MIPS || COMPILE_TEST
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select REGMAP_MMIO
|
|
|
|
config PINCTRL_RK805
|
|
tristate "Pinctrl and GPIO driver for RK805 PMIC"
|
|
depends on MFD_RK808
|
|
select GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the pinctrl driver for RK805.
|
|
|
|
config PINCTRL_OCELOT
|
|
bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select OF_GPIO
|
|
select REGMAP_MMIO
|
|
|
|
config PINCTRL_MICROCHIP_SGPIO
|
|
bool "Pinctrl driver for Microsemi/Microchip Serial GPIO"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select OF_GPIO
|
|
help
|
|
Support for the serial GPIO interface used on Microsemi and
|
|
Microchip SoC's. By using a serial interface, the SIO
|
|
controller significantly extends the number of available
|
|
GPIOs with a minimum number of additional pins on the
|
|
device. The primary purpose of the SIO controller is to
|
|
connect control signals from SFP modules and to act as an
|
|
LED controller.
|
|
|
|
source "drivers/pinctrl/actions/Kconfig"
|
|
source "drivers/pinctrl/aspeed/Kconfig"
|
|
source "drivers/pinctrl/bcm/Kconfig"
|
|
source "drivers/pinctrl/berlin/Kconfig"
|
|
source "drivers/pinctrl/freescale/Kconfig"
|
|
source "drivers/pinctrl/intel/Kconfig"
|
|
source "drivers/pinctrl/mvebu/Kconfig"
|
|
source "drivers/pinctrl/nomadik/Kconfig"
|
|
source "drivers/pinctrl/nuvoton/Kconfig"
|
|
source "drivers/pinctrl/pxa/Kconfig"
|
|
source "drivers/pinctrl/qcom/Kconfig"
|
|
source "drivers/pinctrl/ralink/Kconfig"
|
|
source "drivers/pinctrl/renesas/Kconfig"
|
|
source "drivers/pinctrl/samsung/Kconfig"
|
|
source "drivers/pinctrl/spear/Kconfig"
|
|
source "drivers/pinctrl/sprd/Kconfig"
|
|
source "drivers/pinctrl/stm32/Kconfig"
|
|
source "drivers/pinctrl/sunxi/Kconfig"
|
|
source "drivers/pinctrl/tegra/Kconfig"
|
|
source "drivers/pinctrl/ti/Kconfig"
|
|
source "drivers/pinctrl/uniphier/Kconfig"
|
|
source "drivers/pinctrl/vt8500/Kconfig"
|
|
source "drivers/pinctrl/mediatek/Kconfig"
|
|
source "drivers/pinctrl/zte/Kconfig"
|
|
source "drivers/pinctrl/meson/Kconfig"
|
|
source "drivers/pinctrl/cirrus/Kconfig"
|
|
source "drivers/pinctrl/visconti/Kconfig"
|
|
|
|
config PINCTRL_XWAY
|
|
bool
|
|
depends on SOC_TYPE_XWAY
|
|
depends on PINCTRL_LANTIQ
|
|
|
|
config PINCTRL_TB10X
|
|
bool
|
|
depends on OF && ARC_PLAT_TB10X
|
|
select GPIOLIB
|
|
|
|
config PINCTRL_EQUILIBRIUM
|
|
tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC"
|
|
depends on OF && HAS_IOMEM
|
|
depends on X86 || COMPILE_TEST
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB
|
|
select GPIO_GENERIC
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
|
|
help
|
|
Equilibrium pinctrl driver is a pinctrl & GPIO driver for Intel Lightning
|
|
Mountain network processor SoC that supports both the linux GPIO and pin
|
|
control frameworks. It provides interfaces to setup pinmux, assign desired
|
|
pin functions, configure GPIO attributes for LGM SoC pins. Pinmux and
|
|
pinconf settings are retrieved from device tree.
|
|
|
|
endif
|