mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 03:24:55 +08:00
2dc10ad81f
- "genirq: Introduce generic irq migration for cpu hotunplugged" patch
merged from tip/irq/for-arm to allow the arm64-specific part to be
upstreamed via the arm64 tree
- CPU feature detection reworked to cope with heterogeneous systems
where CPUs may not have exactly the same features. The features
reported by the kernel via internal data structures or ELF_HWCAP are
delayed until all the CPUs are up (and before user space starts)
- Support for 16KB pages, with the additional bonus of a 36-bit VA
space, though the latter only depending on EXPERT
- Implement native {relaxed, acquire, release} atomics for arm64
- New ASID allocation algorithm which avoids IPI on roll-over, together
with TLB invalidation optimisations (using local vs global where
feasible)
- KASan support for arm64
- EFI_STUB clean-up and isolation for the kernel proper (required by
KASan)
- copy_{to,from,in}_user optimisations (sharing the memcpy template)
- perf: moving arm64 to the arm32/64 shared PMU framework
- L1_CACHE_BYTES increased to 128 to accommodate Cavium hardware
- Support for the contiguous PTE hint on kernel mapping (16 consecutive
entries may be able to use a single TLB entry)
- Generic CONFIG_HZ now used on arm64
- defconfig updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3six
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- "genirq: Introduce generic irq migration for cpu hotunplugged" patch
merged from tip/irq/for-arm to allow the arm64-specific part to be
upstreamed via the arm64 tree
- CPU feature detection reworked to cope with heterogeneous systems
where CPUs may not have exactly the same features. The features
reported by the kernel via internal data structures or ELF_HWCAP are
delayed until all the CPUs are up (and before user space starts)
- Support for 16KB pages, with the additional bonus of a 36-bit VA
space, though the latter only depending on EXPERT
- Implement native {relaxed, acquire, release} atomics for arm64
- New ASID allocation algorithm which avoids IPI on roll-over, together
with TLB invalidation optimisations (using local vs global where
feasible)
- KASan support for arm64
- EFI_STUB clean-up and isolation for the kernel proper (required by
KASan)
- copy_{to,from,in}_user optimisations (sharing the memcpy template)
- perf: moving arm64 to the arm32/64 shared PMU framework
- L1_CACHE_BYTES increased to 128 to accommodate Cavium hardware
- Support for the contiguous PTE hint on kernel mapping (16 consecutive
entries may be able to use a single TLB entry)
- Generic CONFIG_HZ now used on arm64
- defconfig updates
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (91 commits)
arm64/efi: fix libstub build under CONFIG_MODVERSIONS
ARM64: Enable multi-core scheduler support by default
arm64/efi: move arm64 specific stub C code to libstub
arm64: page-align sections for DEBUG_RODATA
arm64: Fix build with CONFIG_ZONE_DMA=n
arm64: Fix compat register mappings
arm64: Increase the max granular size
arm64: remove bogus TASK_SIZE_64 check
arm64: make Timer Interrupt Frequency selectable
arm64/mm: use PAGE_ALIGNED instead of IS_ALIGNED
arm64: cachetype: fix definitions of ICACHEF_* flags
arm64: cpufeature: declare enable_cpu_capabilities as static
genirq: Make the cpuhotplug migration code less noisy
arm64: Constify hwcap name string arrays
arm64/kvm: Make use of the system wide safe values
arm64/debug: Make use of the system wide safe value
arm64: Move FP/ASIMD hwcap handling to common code
arm64/HWCAP: Use system wide safe values
arm64/capabilities: Make use of system wide safe value
arm64: Delay cpu feature capability checks
...
61 lines
2.9 KiB
Plaintext
61 lines
2.9 KiB
Plaintext
UEFI, the Unified Extensible Firmware Interface, is a specification
|
|
governing the behaviours of compatible firmware interfaces. It is
|
|
maintained by the UEFI Forum - http://www.uefi.org/.
|
|
|
|
UEFI is an evolution of its predecessor 'EFI', so the terms EFI and
|
|
UEFI are used somewhat interchangeably in this document and associated
|
|
source code. As a rule, anything new uses 'UEFI', whereas 'EFI' refers
|
|
to legacy code or specifications.
|
|
|
|
UEFI support in Linux
|
|
=====================
|
|
Booting on a platform with firmware compliant with the UEFI specification
|
|
makes it possible for the kernel to support additional features:
|
|
- UEFI Runtime Services
|
|
- Retrieving various configuration information through the standardised
|
|
interface of UEFI configuration tables. (ACPI, SMBIOS, ...)
|
|
|
|
For actually enabling [U]EFI support, enable:
|
|
- CONFIG_EFI=y
|
|
- CONFIG_EFI_VARS=y or m
|
|
|
|
The implementation depends on receiving information about the UEFI environment
|
|
in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF.
|
|
|
|
UEFI stub
|
|
=========
|
|
The "stub" is a feature that extends the Image/zImage into a valid UEFI
|
|
PE/COFF executable, including a loader application that makes it possible to
|
|
load the kernel directly from the UEFI shell, boot menu, or one of the
|
|
lightweight bootloaders like Gummiboot or rEFInd.
|
|
|
|
The kernel image built with stub support remains a valid kernel image for
|
|
booting in non-UEFI environments.
|
|
|
|
UEFI kernel support on ARM
|
|
==========================
|
|
UEFI kernel support on the ARM architectures (arm and arm64) is only available
|
|
when boot is performed through the stub.
|
|
|
|
When booting in UEFI mode, the stub deletes any memory nodes from a provided DT.
|
|
Instead, the kernel reads the UEFI memory map.
|
|
|
|
The stub populates the FDT /chosen node with (and the kernel scans for) the
|
|
following parameters:
|
|
________________________________________________________________________________
|
|
Name | Size | Description
|
|
================================================================================
|
|
linux,uefi-system-table | 64-bit | Physical address of the UEFI System Table.
|
|
--------------------------------------------------------------------------------
|
|
linux,uefi-mmap-start | 64-bit | Physical address of the UEFI memory map,
|
|
| | populated by the UEFI GetMemoryMap() call.
|
|
--------------------------------------------------------------------------------
|
|
linux,uefi-mmap-size | 32-bit | Size in bytes of the UEFI memory map
|
|
| | pointed to in previous entry.
|
|
--------------------------------------------------------------------------------
|
|
linux,uefi-mmap-desc-size | 32-bit | Size in bytes of each entry in the UEFI
|
|
| | memory map.
|
|
--------------------------------------------------------------------------------
|
|
linux,uefi-mmap-desc-ver | 32-bit | Version of the mmap descriptor format.
|
|
--------------------------------------------------------------------------------
|