linux/drivers/clk/mvebu/ap806-system-controller.c
Stephen Boyd cd8ca30052 Merge branches 'clk-mvebu-periph-pm', 'clk-meson', 'clk-allwinner', 'clk-mvebu-dup' and 'clk-davinci' into clk-next
- S2RAM support for Marvell mvebu periph clks

* clk-mvebu-periph-pm:
  clk: mvebu: armada-37xx-periph: add suspend/resume support
  clk: mvebu: armada-37xx-periph: save the IP base address in the driver data

* clk-meson:
  clk: meson: meson8b: use the regmap in the internal reset controller
  clk: meson: meson8b: register the clock controller early
  clk: meson-axg: pcie: drop the mpll3 clock parent
  clk: meson: axg: round audio system master clocks down
  clk: meson: clk-pll: drop hard-coded rates from pll tables
  clk: meson: clk-pll: remove od parameters
  clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessary
  clk: meson: clk-pll: add enable bit

* clk-allwinner:
  dt-bindings: clock: sun50i-a64-ccu: Add PLL_VIDEO0 macro
  clk: sunxi-ng: a64: Add max. rate constraint to video PLLs
  clk: sunxi-ng: a64: Add minimal rate for video PLLs
  clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks
  clk: sunxi-ng: a83t: Add max. rate constraint to video PLLs
  clk: sunxi-ng: nkmp: Add constraint for maximum rate
  clk: sunxi-ng: r40: Add max. rate constraint to video PLLs
  clk: sunxi-ng: h3/h5: Add max. rate constraint to pll-video
  clk: sunxi-ng: Add maximum rate constraint to NM PLLs
  clk: sunxi-ng: h6: fix PWM gate/reset offset
  clk: sunxi-ng: h6: fix bus clocks' divider position

* clk-mvebu-dup:
  clk: mvebu: ap806: Remove superfluous of_clk_add_provider

* clk-davinci:
  clk: davinci: kill davinci_clk_reset_assert/deassert()
2018-10-18 15:39:08 -07:00

221 lines
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Marvell Armada AP806 System Controller
*
* Copyright (C) 2016 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
*/
#define pr_fmt(fmt) "ap806-system-controller: " fmt
#include <linux/clk-provider.h>
#include <linux/mfd/syscon.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#define AP806_SAR_REG 0x400
#define AP806_SAR_CLKFREQ_MODE_MASK 0x1f
#define AP806_CLK_NUM 5
static struct clk *ap806_clks[AP806_CLK_NUM];
static struct clk_onecell_data ap806_clk_data = {
.clks = ap806_clks,
.clk_num = AP806_CLK_NUM,
};
static char *ap806_unique_name(struct device *dev, struct device_node *np,
char *name)
{
const __be32 *reg;
u64 addr;
reg = of_get_property(np, "reg", NULL);
addr = of_translate_address(np, reg);
return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
(unsigned long long)addr, name);
}
static int ap806_syscon_common_probe(struct platform_device *pdev,
struct device_node *syscon_node)
{
unsigned int freq_mode, cpuclk_freq;
const char *name, *fixedclk_name;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct regmap *regmap;
u32 reg;
int ret;
regmap = syscon_node_to_regmap(syscon_node);
if (IS_ERR(regmap)) {
dev_err(dev, "cannot get regmap\n");
return PTR_ERR(regmap);
}
ret = regmap_read(regmap, AP806_SAR_REG, &reg);
if (ret) {
dev_err(dev, "cannot read from regmap\n");
return ret;
}
freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK;
switch (freq_mode) {
case 0x0:
case 0x1:
cpuclk_freq = 2000;
break;
case 0x6:
case 0x7:
cpuclk_freq = 1800;
break;
case 0x4:
case 0xB:
case 0xD:
cpuclk_freq = 1600;
break;
case 0x1a:
cpuclk_freq = 1400;
break;
case 0x14:
case 0x17:
cpuclk_freq = 1300;
break;
case 0x19:
cpuclk_freq = 1200;
break;
case 0x13:
case 0x1d:
cpuclk_freq = 1000;
break;
case 0x1c:
cpuclk_freq = 800;
break;
case 0x1b:
cpuclk_freq = 600;
break;
default:
dev_err(dev, "invalid SAR value\n");
return -EINVAL;
}
/* Convert to hertz */
cpuclk_freq *= 1000 * 1000;
/* CPU clocks depend on the Sample At Reset configuration */
name = ap806_unique_name(dev, syscon_node, "cpu-cluster-0");
ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
0, cpuclk_freq);
if (IS_ERR(ap806_clks[0])) {
ret = PTR_ERR(ap806_clks[0]);
goto fail0;
}
name = ap806_unique_name(dev, syscon_node, "cpu-cluster-1");
ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
cpuclk_freq);
if (IS_ERR(ap806_clks[1])) {
ret = PTR_ERR(ap806_clks[1]);
goto fail1;
}
/* Fixed clock is always 1200 Mhz */
fixedclk_name = ap806_unique_name(dev, syscon_node, "fixed");
ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL,
0, 1200 * 1000 * 1000);
if (IS_ERR(ap806_clks[2])) {
ret = PTR_ERR(ap806_clks[2]);
goto fail2;
}
/* MSS Clock is fixed clock divided by 6 */
name = ap806_unique_name(dev, syscon_node, "mss");
ap806_clks[3] = clk_register_fixed_factor(NULL, name, fixedclk_name,
0, 1, 6);
if (IS_ERR(ap806_clks[3])) {
ret = PTR_ERR(ap806_clks[3]);
goto fail3;
}
/* SDIO(/eMMC) Clock is fixed clock divided by 3 */
name = ap806_unique_name(dev, syscon_node, "sdio");
ap806_clks[4] = clk_register_fixed_factor(NULL, name,
fixedclk_name,
0, 1, 3);
if (IS_ERR(ap806_clks[4])) {
ret = PTR_ERR(ap806_clks[4]);
goto fail4;
}
ret = of_clk_add_provider(np, of_clk_src_onecell_get, &ap806_clk_data);
if (ret)
goto fail_clk_add;
return 0;
fail_clk_add:
clk_unregister_fixed_factor(ap806_clks[4]);
fail4:
clk_unregister_fixed_factor(ap806_clks[3]);
fail3:
clk_unregister_fixed_rate(ap806_clks[2]);
fail2:
clk_unregister_fixed_rate(ap806_clks[1]);
fail1:
clk_unregister_fixed_rate(ap806_clks[0]);
fail0:
return ret;
}
static int ap806_syscon_legacy_probe(struct platform_device *pdev)
{
dev_warn(&pdev->dev, FW_WARN "Using legacy device tree binding\n");
dev_warn(&pdev->dev, FW_WARN "Update your device tree:\n");
dev_warn(&pdev->dev, FW_WARN
"This binding won't be supported in future kernel\n");
return ap806_syscon_common_probe(pdev, pdev->dev.of_node);
}
static int ap806_clock_probe(struct platform_device *pdev)
{
return ap806_syscon_common_probe(pdev, pdev->dev.of_node->parent);
}
static const struct of_device_id ap806_syscon_legacy_of_match[] = {
{ .compatible = "marvell,ap806-system-controller", },
{ }
};
static struct platform_driver ap806_syscon_legacy_driver = {
.probe = ap806_syscon_legacy_probe,
.driver = {
.name = "marvell-ap806-system-controller",
.of_match_table = ap806_syscon_legacy_of_match,
.suppress_bind_attrs = true,
},
};
builtin_platform_driver(ap806_syscon_legacy_driver);
static const struct of_device_id ap806_clock_of_match[] = {
{ .compatible = "marvell,ap806-clock", },
{ }
};
static struct platform_driver ap806_clock_driver = {
.probe = ap806_clock_probe,
.driver = {
.name = "marvell-ap806-clock",
.of_match_table = ap806_clock_of_match,
.suppress_bind_attrs = true,
},
};
builtin_platform_driver(ap806_clock_driver);