linux/arch/arm/mach-integrator/integrator_cp.c
Linus Torvalds b274776c54 arm-soc: cleanups
A large number of cleanups, all over the platforms. This is dominated
 largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
 others moving code out of arch/arm into more appropriate subsystems.
 The clocksource and irqchip drivers are now abstracted to the point
 where platforms that are already cleaned up do not need to even specify
 the driver they use, it can all get configured from the device tree
 as we do for normal device drivers. The clocksource changes basically
 touch every single platform in the process.
 
 We further clean up the use of platform specific header files here,
 with the goal of turning more of the platforms over to being
 "multiplatform" enabled, which implies that they cannot expose
 their headers to architecture independent code any more.
 
 It is expected that no functional changes are part of the cleanup.
 The overall reduction in total code lines is mostly the result of
 removing broken and obsolete code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyKmCrR//JCVInAQIN8RAAnb/uPytmlMjn5yCksF4Mvb/FVbn/TVwz
 KRIGpCHOzyKK1q7pM8NRUVWfjW2SZqbXJFqx6zBGKSlDPvFTOhsLyyupU+Tnyu5W
 IX4eIUBwb+a6H7XDHw0X2YI8uHzi5RNLhne0A1QyDKcnuHs1LDAttXnJHaK4Ap6Y
 NN2YFt3l3ld7DXWXJtMsw5v8lC10aeIFGTvXefaPDAdeMLivmI57qEUMDXknNr7W
 Odz/Rc0/cw3BNBVl/zNHA0jw7FOjKAymCYYNUa4xDCJEr+JnIRTqizd0N/YIIC7x
 aA2xjJ3oKUFyF51yiJE6nFuTyJznhwtehc+uiMOSIkjrPLym52LEHmd7G5Yqlmjz
 oiei09qBb870q3lGxwfht9iaeIwYgQFYGfD0yW5QWArCO5pxhtCPLPH7YZNZtcQd
 ZJRSGGqT/ljBz3bm0K9OLESeeTTN7+Nxvtpiz/CD+Piegz0gWJzDYJRTzkJ3UWpA
 WTVhVQdWUeX2JrNkgM7Z3Tu8iXOe+LIEs7kVXGJZSREmIIZiRvR36UrODZtAkp9I
 7YQ+srX/uaR832pgK0RrHK0zY0psU6MmIvhYxJZFbx7keiPA9eH6drb0x7tGqcUD
 FzEUzvcZvyqppndfBi+R60H/YKAhJDEXdwxzo6dyCpPQaW1T9GnzIqXuE1zin+Aw
 X7Y8YywMbHI=
 =DvgJ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...
2013-02-21 14:58:40 -08:00

566 lines
14 KiB
C

/*
* linux/arch/arm/mach-integrator/integrator_cp.c
*
* Copyright (C) 2003 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/irqchip/versatile-fpga.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/sys_soc.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <mach/cm.h>
#include <mach/lm.h>
#include <mach/irqs.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/timer-sp.h>
#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "common.h"
/* Base address to the CP controller */
static void __iomem *intcp_con_base;
#define INTCP_PA_FLASH_BASE 0x24000000
#define INTCP_PA_CLCD_BASE 0xc0000000
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
/*
* Logical Physical
* f1000000 10000000 Core module registers
* f1100000 11000000 System controller registers
* f1200000 12000000 EBI registers
* f1300000 13000000 Counter/Timer
* f1400000 14000000 Interrupt controller
* f1600000 16000000 UART 0
* f1700000 17000000 UART 1
* f1a00000 1a000000 Debug LEDs
* fc900000 c9000000 GPIO
* fca00000 ca000000 SIC
* fcb00000 cb000000 CP system control
*/
static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
{
.virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}
};
static void __init intcp_map_io(void)
{
iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
}
/*
* Flash handling.
*/
static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
val |= CINTEGRATOR_FLASHPROG_FLWREN;
writel(val, intcp_con_base + INTCP_FLASHPROG);
return 0;
}
static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
if (on)
val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
else
val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static struct physmap_flash_data intcp_flash_data = {
.width = 4,
.init = intcp_flash_init,
.exit = intcp_flash_exit,
.set_vpp = intcp_flash_set_vpp,
};
/*
* It seems that the card insertion interrupt remains active after
* we've acknowledged it. We therefore ignore the interrupt, and
* rely on reading it from the SIC. This also means that we must
* clear the latched interrupt.
*/
static unsigned int mmc_status(struct device *dev)
{
unsigned int status = readl(__io_address(0xca000000 + 4));
writel(8, intcp_con_base + 8);
return status & 8;
}
static struct mmci_platform_data mmc_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
.gpio_cd = -1,
};
/*
* CLCD support
*/
/*
* Ensure VGA is selected.
*/
static void cp_clcd_enable(struct clcd_fb *fb)
{
struct fb_var_screeninfo *var = &fb->fb.var;
u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2;
if (var->bits_per_pixel <= 8 ||
(var->bits_per_pixel == 16 && var->green.length == 5))
/* Pseudocolor, RGB555, BGR555 */
val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
else if (fb->fb.var.bits_per_pixel <= 16)
/* truecolor RGB565 */
val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
else
val = 0; /* no idea for this, don't trust the docs */
cm_control(CM_CTRL_LCDMUXSEL_MASK|
CM_CTRL_LCDEN0|
CM_CTRL_LCDEN1|
CM_CTRL_STATIC1|
CM_CTRL_STATIC2|
CM_CTRL_STATIC|
CM_CTRL_n24BITEN, val);
}
static int cp_clcd_setup(struct clcd_fb *fb)
{
fb->panel = versatile_clcd_get_panel("VGA");
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, SZ_1M);
}
static struct clcd_board clcd_data = {
.name = "Integrator/CP",
.caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = cp_clcd_enable,
.setup = cp_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
static void __init intcp_init_early(void)
{
#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
versatile_sched_clock_init(REFCOUNTER, 24000000);
#endif
}
#ifdef CONFIG_OF
static void __init cp_of_timer_init(void)
{
struct device_node *node;
const char *path;
void __iomem *base;
int err;
int irq;
err = of_property_read_string(of_aliases,
"arm,timer-primary", &path);
if (WARN_ON(err))
return;
node = of_find_node_by_path(path);
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
writel(0, base + TIMER_CTRL);
sp804_clocksource_init(base, node->name);
err = of_property_read_string(of_aliases,
"arm,timer-secondary", &path);
if (WARN_ON(err))
return;
node = of_find_node_by_path(path);
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
irq = irq_of_parse_and_map(node, 0);
writel(0, base + TIMER_CTRL);
sp804_clockevents_init(base, irq, node->name);
}
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
};
static void __init intcp_init_irq_of(void)
{
of_irq_init(fpga_irq_of_match);
integrator_clk_init(true);
}
/*
* For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
* and enforce the bus names since these are used for clock lookups.
*/
static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
"rtc", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
"uart0", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
"uart1", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
"kmi0", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
"kmi1", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
"mmci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
"aaci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
"clcd", &clcd_data),
OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE,
"physmap-flash", &intcp_flash_data),
{ /* sentinel */ },
};
static void __init intcp_init_of(void)
{
struct device_node *root;
struct device_node *cpcon;
struct device *parent;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
u32 intcp_sc_id;
int err;
/* Here we create an SoC device for the root node */
root = of_find_node_by_path("/");
if (!root)
return;
cpcon = of_find_node_by_path("/cpcon");
if (!cpcon)
return;
intcp_con_base = of_iomap(cpcon, 0);
if (!intcp_con_base)
return;
intcp_sc_id = readl(intcp_con_base);
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return;
err = of_property_read_string(root, "compatible",
&soc_dev_attr->soc_id);
if (err)
return;
err = of_property_read_string(root, "model", &soc_dev_attr->machine);
if (err)
return;
soc_dev_attr->family = "Integrator";
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
'A' + (intcp_sc_id & 0x0f));
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR_OR_NULL(soc_dev)) {
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
return;
}
parent = soc_device_to_device(soc_dev);
if (!IS_ERR_OR_NULL(parent))
integrator_init_sysfs(parent, intcp_sc_id);
of_platform_populate(root, of_default_bus_match_table,
intcp_auxdata_lookup, parent);
}
static const char * intcp_dt_board_compat[] = {
"arm,integrator-cp",
NULL,
};
DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.reserve = integrator_reserve,
.map_io = intcp_map_io,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
.handle_irq = fpga_handle_irq,
.init_time = cp_of_timer_init,
.init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
MACHINE_END
#endif
#ifdef CONFIG_ATAGS
/*
* For the ATAG boot some static mappings are needed. This will
* go away with the ATAG support down the road.
*/
static struct map_desc intcp_io_desc_atag[] __initdata = {
{
.virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE
},
};
static void __init intcp_map_io_atag(void)
{
iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
intcp_map_io();
}
/*
* This is where non-devicetree initialization code is collected and stashed
* for eventual deletion.
*/
#define INTCP_FLASH_SIZE SZ_32M
static struct resource intcp_flash_resource = {
.start = INTCP_PA_FLASH_BASE,
.end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device intcp_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &intcp_flash_data,
},
.num_resources = 1,
.resource = &intcp_flash_resource,
};
#define INTCP_ETH_SIZE 0x10
static struct resource smc91x_resources[] = {
[0] = {
.start = INTEGRATOR_CP_ETH_BASE,
.end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_CP_ETHINT,
.end = IRQ_CP_ETHINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct platform_device *intcp_devs[] __initdata = {
&intcp_flash_device,
&smc91x_device,
};
#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40)
#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE)
#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE)
static void __init intcp_init_irq(void)
{
u32 pic_mask, cic_mask, sic_mask;
/* These masks are for the HW IRQ registers */
pic_mask = ~((~0u) << (11 - 0));
pic_mask |= (~((~0u) << (29 - 22))) << 22;
cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
/*
* Disable all interrupt sources
*/
writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
-1, pic_mask, NULL);
fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
-1, cic_mask, NULL);
fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
IRQ_CP_CPPLDINT, sic_mask, NULL);
integrator_clk_init(true);
}
#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
static void __init cp_timer_init(void)
{
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
}
#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
INTEGRATOR_CP_MMC_IRQS, &mmc_data);
static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
INTEGRATOR_CP_AACI_IRQS, NULL);
static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
{ IRQ_CP_CLCDCINT }, &clcd_data);
static struct amba_device *amba_devs[] __initdata = {
&mmc_device,
&aaci_device,
&clcd_device,
};
static void __init intcp_init(void)
{
int i;
platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
integrator_init(true);
}
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = intcp_map_io_atag,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq,
.handle_irq = fpga_handle_irq,
.init_time = cp_timer_init,
.init_machine = intcp_init,
.restart = integrator_restart,
MACHINE_END
#endif