mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
bf3251e112
imx6ul-14x14-evk has a wm8960 codec connected via SAI2 port. Add support for it. Thanks to Petr Kulhavy <brain@jikos.cz> for the hint on initializing the PLL4 frequency to get a correct MCLK. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
439 lines
11 KiB
Plaintext
439 lines
11 KiB
Plaintext
/*
|
|
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx6ul.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
|
|
compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_sd1_vmmc: sd1_regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VSD_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "mx6ul-wm8960";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&dailink_master>;
|
|
simple-audio-card,frame-master = <&dailink_master>;
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Mic Jack",
|
|
"Line", "Line In",
|
|
"Line", "Line Out",
|
|
"Speaker", "Speaker",
|
|
"Headphone", "Headphone Jack";
|
|
simple-audio-card,routing =
|
|
"Headphone Jack", "HP_L",
|
|
"Headphone Jack", "HP_R",
|
|
"Speaker", "SPK_LP",
|
|
"Speaker", "SPK_LN",
|
|
"Speaker", "SPK_RP",
|
|
"Speaker", "SPK_RN",
|
|
"LINPUT1", "Mic Jack",
|
|
"LINPUT3", "Mic Jack",
|
|
"RINPUT1", "Mic Jack",
|
|
"RINPUT2", "Mic Jack";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&sai2>;
|
|
};
|
|
|
|
dailink_master: simple-audio-card,codec {
|
|
sound-dai = <&codec>;
|
|
clocks = <&clks IMX6UL_CLK_SAI2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&clks {
|
|
assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
|
|
assigned-clock-rates = <786432000>;
|
|
};
|
|
|
|
&cpu0 {
|
|
arm-supply = <®_arm>;
|
|
soc-supply = <®_soc>;
|
|
};
|
|
|
|
&i2c2 {
|
|
clock_frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
codec: wm8960@1a {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "wlf,wm8960";
|
|
reg = <0x1a>;
|
|
wlf,shared-lrclk;
|
|
};
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet1>;
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet2>;
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy1>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@2 {
|
|
reg = <2>;
|
|
};
|
|
|
|
ethphy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_qspi>;
|
|
status = "okay";
|
|
|
|
flash0: n25q256a@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "micron,n25q256a";
|
|
spi-max-frequency = <29000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&sai2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sai2>;
|
|
assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
|
|
<&clks IMX6UL_CLK_SAI2>;
|
|
assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
|
|
assigned-clock-rates = <0>, <12288000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&snvs_poweroff {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_tsc>;
|
|
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
|
measure-delay-time = <0xffff>;
|
|
pre-charge-time = <0xfff>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
dr_mode = "host";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
vmmc-supply = <®_sd1_vmmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
no-1-8-v;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl_csi1: csi1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
|
|
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
|
|
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
|
|
MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
|
|
MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
|
|
MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
|
|
MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
|
|
MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
|
|
MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
|
|
MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
|
|
MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
|
|
MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet1: enet1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet2: enet2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
|
|
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
|
|
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
|
|
MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
|
|
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
|
|
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
|
|
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
|
|
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
|
|
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
|
|
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
|
|
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan1: flexcan1grp{
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
|
|
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2: flexcan2grp{
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
|
|
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
|
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
|
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcdif_dat: lcdifdatgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
|
|
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
|
|
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
|
|
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
|
|
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
|
|
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
|
|
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
|
|
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
|
|
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
|
|
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
|
|
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
|
|
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
|
|
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
|
|
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
|
|
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
|
|
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
|
|
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
|
|
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
|
|
MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
|
|
MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
|
|
MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
|
|
MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
|
|
MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
|
|
MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcdif_ctrl: lcdifctrlgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
|
|
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
|
|
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
|
|
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
|
|
/* used for lcd reset */
|
|
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_qspi: qspigrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
|
|
MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
|
|
MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
|
|
MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
|
|
MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
|
|
MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_sai2: sai2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
|
|
MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
|
|
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
|
|
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
|
|
MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
|
|
MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_sim2: sim2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808
|
|
MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31
|
|
MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808
|
|
MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808
|
|
MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809
|
|
MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008
|
|
>;
|
|
};
|
|
|
|
pinctrl_tsc: tscgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
|
|
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
|
|
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
|
|
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
|
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
|
|
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
|
|
MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
|
|
MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
|
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
|
|
MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
|
|
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
|
|
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
|
|
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
|
|
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
|
|
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
|
|
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
|
|
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
|
|
>;
|
|
};
|
|
};
|