Tony Lindgren 20f795881f phy: phy-twl4030-usb: Fix cable state handling ... With the recent regulator changes I noticed new warnings on doing rmmod of phy-twl4030-usb: WARNING: CPU: 0 PID: 1080 at drivers/regulator/core.c:2046 _regulator_put ... Turns out we can currently miss disconnect at least for cases where status is 0 and linkstat is 0. And in that case doing rmmod phy-twl4030-usb will produce the regulator_put() warning. This is because the missed disconnect causes unbalanced PM runtime calls and the regulators will be on exit. Let's fix the issue by using an atomic flag for the cable state to make sure that PM runtime won't get out of sync with the cable state. That way we can also simplify the code a bit. Note that we can also drop the old comments, those relate to issues that the battery charger driver and musb driver is dealing with rather than the USB PHY driver. Cc: NeilBrown <neilb@suse.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2019-04-17 10:29:49 +05:30
..
allwinner	phy: Move Allwinner A31 D-PHY driver to drivers/phy/	2019-02-07 09:34:49 +01:00
amlogic	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
broadcom	phy: bcm-sr-pcie: Change operation when PIPEMUX=1	2019-02-07 11:11:06 +05:30
cadence	phy: Add Cadence D-PHY support	2019-02-07 11:11:06 +05:30
freescale	phy: freescale: Break dependency on SOC_IMX8MQ for USB PHY	2019-02-07 11:10:34 +05:30
hisilicon	phy: add inno-usb2-phy driver for hi3798cv200 SoC	2018-03-16 16:55:29 +05:30
lantiq	phy: lantiq: Fix compile warning	2018-09-26 13:09:39 +05:30
marvell	USB/PHY patches for 5.1-rc1	2019-03-06 16:48:27 -08:00
mediatek	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
motorola	phy: mapphone-mdm6600: Improve phy related runtime PM calls	2018-12-12 10:01:39 +05:30
mscc	phy: ocelot-serdes: convert to use eth phy mode and submode	2018-12-12 10:01:35 +05:30
qualcomm	phy: qcom-qmp: Add QMP UFS PHY support for msm8998	2019-02-12 13:02:38 +05:30
ralink	phy: add 'depends on HAS_IOMEM' to fix unmet dependency	2018-03-16 13:40:45 +05:30
renesas	phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure	2018-12-12 10:01:38 +05:30
rockchip	phy: phy-rockchip-inno-usb2: drop reading the utmi-avalid property	2019-02-07 11:10:44 +05:30
samsung	phy: exynos-mipi-video: Simplify code by using regmap_update_bits()	2018-04-25 10:52:59 +05:30
socionext	phy: uniphier-pcie: Depend on HAS_IOMEM	2018-11-12 16:19:06 +05:30
st	phy: stm32: fix usbphyc static checker and checkpatch warnings	2018-05-20 21:51:25 +05:30
tegra	phy: Convert to using %pOFn instead of device_node.name	2018-09-25 16:10:07 +05:30
ti	phy: phy-twl4030-usb: Fix cable state handling	2019-04-17 10:29:49 +05:30
Kconfig	phy: dphy: Add configuration helpers	2018-12-12 10:01:51 +05:30
Makefile	phy: dphy: Add configuration helpers	2018-12-12 10:01:51 +05:30
phy-core-mipi-dphy.c	phy: dphy: Change units of wakeup and init parameters	2019-02-07 11:11:05 +05:30
phy-core.c	phy: make phy-core explicitly non-modular	2019-02-07 11:10:45 +05:30
phy-lpc18xx-usb-otg.c	phy: lpc18xx-usb-otg: error handling in lpc18xx_usb_otg_phy_power_on()	2018-03-16 13:40:42 +05:30
phy-pistachio-usb.c	PHY: Add driver for Pistachio USB2.0 PHY	2015-06-21 21:53:38 +02:00
phy-xgene.c	phy: xgene: rename "enum phy_mode" to "enum xgene_phy_mode"	2016-07-04 17:19:21 +05:30