linux/drivers/remoteproc
Suman Anna 20ad1de0f1 remoteproc: pru: Add pru-specific debugfs support
The remoteproc core creates certain standard debugfs entries,
that does not give a whole lot of useful information for the
PRUs. The PRU remoteproc driver is enhanced to add additional
debugfs entries for PRU. These will be auto-cleaned up when
the parent rproc debug directory is removed.

The enhanced debugfs support adds two new entries: 'regs' and
'single_step'. The 'regs' dumps out the useful CTRL sub-module
registers as well as each of the 32 GPREGs and CT_REGs registers.
The GPREGs and CT_REGs though are printed only when the PRU is
halted and accessible as per the IP design.

The 'single_step' utilizes the single-step execution of the PRU
cores. Writing a non-zero value performs a single step, and a
zero value restores the PRU to execute in the same mode as the
mode before the first single step. (note: if the PRU is halted
because of a halt instruction, then no change occurs).

Logic for setting the PC and jumping over a halt instruction shall
be added in the future.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208141002.17777-5-grzegorz.jaszczyk@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10 10:56:09 -06:00
..
da8xx_remoteproc.c remoteproc: Remove dev_err() usage after platform_get_irq() 2019-08-26 21:59:58 -07:00
imx_rproc.c remoteproc: Use size_t type for len in da_to_va 2020-03-25 22:29:38 -07:00
ingenic_rproc.c remoteproc: ingenic: Constify ingenic_rproc_ops 2020-11-17 21:46:49 -06:00
Kconfig remoteproc: pru: Add a PRU remoteproc driver 2020-12-10 10:55:55 -06:00
keystone_remoteproc.c remoteproc: Use size_t type for len in da_to_va 2020-03-25 22:29:38 -07:00
Makefile remoteproc: pru: Add a PRU remoteproc driver 2020-12-10 10:55:55 -06:00
mtk_common.h remoteproc/mediatek: fix sparse errors on dma_alloc and dma_free 2020-11-20 21:45:10 -06:00
mtk_scp_ipi.c remoteproc/mediatek: Add support for mt8192 SCP 2020-09-25 23:37:42 -05:00
mtk_scp.c remoteproc/mediatek: skip if filesz is 0 2020-11-20 21:45:42 -06:00
omap_remoteproc.c treewide: Use fallthrough pseudo-keyword 2020-08-23 17:36:59 -05:00
omap_remoteproc.h remoteproc/omap: Switch to SPDX license identifiers 2020-03-25 22:29:51 -07:00
pru_rproc.c remoteproc: pru: Add pru-specific debugfs support 2020-12-10 10:56:09 -06:00
pru_rproc.h remoteproc: pru: Add support for PRU specific interrupt configuration 2020-12-10 10:56:01 -06:00
qcom_common.c remoteproc: qcom: Add missing slab.h 2020-07-13 11:54:27 -07:00
qcom_common.h remoteproc: sysmon: Expose the shutdown result 2020-11-25 18:03:30 -06:00
qcom_pil_info.c remoteproc: qcom: pil-info: Fix shift overflow 2020-07-16 21:30:35 -07:00
qcom_pil_info.h remoteproc: qcom: Introduce helper to store pil info in IMEM 2020-07-01 22:10:18 -07:00
qcom_q6v5_adsp.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5_mss.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5_pas.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5_wcss.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5.h remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_sysmon.c remoteproc: sysmon: fix shutdown_acked state 2020-12-04 16:40:52 -06:00
qcom_wcnss_iris.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
qcom_wcnss.c remoteproc: qcom_wcnss: Allow replacing regulators with power domains 2020-10-26 10:23:11 -05:00
qcom_wcnss.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
remoteproc_cdev.c remoteproc: Add remoteproc character device interface 2020-08-04 20:16:37 -07:00
remoteproc_core.c remoteproc: Add a rproc_set_firmware() API 2020-11-25 23:05:24 -06:00
remoteproc_coredump.c remoteproc: Change default dump configuration to "disabled" 2020-10-13 19:20:54 -05:00
remoteproc_debugfs.c remoteproc: Change default dump configuration to "disabled" 2020-10-13 19:20:54 -05:00
remoteproc_elf_helpers.h remoteproc: Add elf helpers to access elf64 and elf32 fields 2020-03-25 22:29:39 -07:00
remoteproc_elf_loader.c remoteproc: remove rproc_elf32_sanity_check 2020-04-22 21:57:26 -07:00
remoteproc_internal.h remoteproc: Add remoteproc character device interface 2020-08-04 20:16:37 -07:00
remoteproc_sysfs.c remoteproc: Add a rproc_set_firmware() API 2020-11-25 23:05:24 -06:00
remoteproc_virtio.c dma-mapping: split <linux/dma-mapping.h> 2020-10-06 07:07:03 +02:00
st_remoteproc.c remoteproc: remove rproc_elf32_sanity_check 2020-04-22 21:57:26 -07:00
st_slim_rproc.c remoteproc: remove rproc_elf32_sanity_check 2020-04-22 21:57:26 -07:00
stm32_rproc.c remoteproc: stm32: Constify st_rproc_ops 2020-11-17 21:47:03 -06:00
ti_k3_dsp_remoteproc.c remoteproc: k3-dsp: Add support for C71x DSPs 2020-07-28 17:08:32 -07:00
ti_k3_r5_remoteproc.c remoteproc: k3-r5: Adjust TCM sizes in Split-mode on J7200 SoCs 2020-11-25 23:05:25 -06:00
ti_sci_proc.h remoteproc: k3: Add TI-SCI processor control helper functions 2020-07-28 17:06:43 -07:00
wkup_m3_rproc.c remoteproc: Use size_t type for len in da_to_va 2020-03-25 22:29:38 -07:00