korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity
205e0c0577
linux/drivers/hwmon/pmbus/pmbus_core.c
Patrick Rudolph 3fd2188e58 hwmon: pmbus: Drop unnecessary clear fault page 
The pmbus_check_byte_register function already calls clear
fault page, so there's no need to do it again in
pmbus_identify_common.

TEST: Verified using an I2C bus analyser to confirm that only
      one clear fault page is being send instead of two in a row.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230817092527.808631-2-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-21 06:04:31 -07:00

3693 lines
91 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware monitoring driver for PMBus devices
*
* Copyright (c) 2010, 2011 Ericsson AB.
* Copyright (c) 2012 Guenter Roeck
*/
#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/pmbus.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/of.h>
#include <linux/thermal.h>
#include "pmbus.h"
/*
* Number of additional attribute pointers to allocate
* with each call to krealloc
*/
#define PMBUS_ATTR_ALLOC_SIZE 32
#define PMBUS_NAME_SIZE 24
struct pmbus_sensor {
struct pmbus_sensor *next;
char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */
struct device_attribute attribute;
u8 page; /* page number */
u8 phase; /* phase number, 0xff for all phases */
u16 reg; /* register */
enum pmbus_sensor_classes class; /* sensor class */
bool update; /* runtime sensor update needed */
bool convert; /* Whether or not to apply linear/vid/direct */
int data; /* Sensor data.
Negative if there was a read error */
};
#define to_pmbus_sensor(_attr) \
container_of(_attr, struct pmbus_sensor, attribute)
struct pmbus_boolean {
char name[PMBUS_NAME_SIZE]; /* sysfs boolean name */
struct sensor_device_attribute attribute;
struct pmbus_sensor *s1;
struct pmbus_sensor *s2;
};
#define to_pmbus_boolean(_attr) \
container_of(_attr, struct pmbus_boolean, attribute)
struct pmbus_label {
char name[PMBUS_NAME_SIZE]; /* sysfs label name */
struct device_attribute attribute;
char label[PMBUS_NAME_SIZE]; /* label */
};
#define to_pmbus_label(_attr) \
container_of(_attr, struct pmbus_label, attribute)
/* Macros for converting between sensor index and register/page/status mask */
#define PB_STATUS_MASK 0xffff
#define PB_REG_SHIFT 16
#define PB_REG_MASK 0x3ff
#define PB_PAGE_SHIFT 26
#define PB_PAGE_MASK 0x3f
#define pb_reg_to_index(page, reg, mask) (((page) << PB_PAGE_SHIFT) | \
((reg) << PB_REG_SHIFT) | (mask))
#define pb_index_to_page(index) (((index) >> PB_PAGE_SHIFT) & PB_PAGE_MASK)
#define pb_index_to_reg(index) (((index) >> PB_REG_SHIFT) & PB_REG_MASK)
#define pb_index_to_mask(index) ((index) & PB_STATUS_MASK)
struct pmbus_data {
struct device *dev;
struct device *hwmon_dev;
struct regulator_dev **rdevs;
u32 flags; /* from platform data */
int exponent[PMBUS_PAGES];
/* linear mode: exponent for output voltages */
const struct pmbus_driver_info *info;
int max_attributes;
int num_attributes;
struct attribute_group group;
const struct attribute_group **groups;
struct dentry *debugfs; /* debugfs device directory */
struct pmbus_sensor *sensors;
struct mutex update_lock;
bool has_status_word; /* device uses STATUS_WORD register */
int (*read_status)(struct i2c_client *client, int page);
s16 currpage; /* current page, -1 for unknown/unset */
s16 currphase; /* current phase, 0xff for all, -1 for unknown/unset */
int vout_low[PMBUS_PAGES]; /* voltage low margin */
int vout_high[PMBUS_PAGES]; /* voltage high margin */
};
struct pmbus_debugfs_entry {
struct i2c_client *client;
u8 page;
u8 reg;
};
static const int pmbus_fan_rpm_mask[] = {
PB_FAN_1_RPM,
PB_FAN_2_RPM,
PB_FAN_1_RPM,
PB_FAN_2_RPM,
};
static const int pmbus_fan_config_registers[] = {
PMBUS_FAN_CONFIG_12,
PMBUS_FAN_CONFIG_12,
PMBUS_FAN_CONFIG_34,
PMBUS_FAN_CONFIG_34
};
static const int pmbus_fan_command_registers[] = {
PMBUS_FAN_COMMAND_1,
PMBUS_FAN_COMMAND_2,
PMBUS_FAN_COMMAND_3,
PMBUS_FAN_COMMAND_4,
};
void pmbus_clear_cache(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor *sensor;
for (sensor = data->sensors; sensor; sensor = sensor->next)
sensor->data = -ENODATA;
}
EXPORT_SYMBOL_NS_GPL(pmbus_clear_cache, PMBUS);
void pmbus_set_update(struct i2c_client *client, u8 reg, bool update)
{
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor *sensor;
for (sensor = data->sensors; sensor; sensor = sensor->next)
if (sensor->reg == reg)
sensor->update = update;
}
EXPORT_SYMBOL_NS_GPL(pmbus_set_update, PMBUS);
int pmbus_set_page(struct i2c_client *client, int page, int phase)
{
struct pmbus_data *data = i2c_get_clientdata(client);
int rv;
if (page < 0)
return 0;
if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL) &&
data->info->pages > 1 && page != data->currpage) {
rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
if (rv < 0)
return rv;
rv = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
if (rv < 0)
return rv;
if (rv != page)
return -EIO;
}
data->currpage = page;
if (data->info->phases[page] && data->currphase != phase &&
!(data->info->func[page] & PMBUS_PHASE_VIRTUAL)) {
rv = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
phase);
if (rv)
return rv;
}
data->currphase = phase;
return 0;
}
EXPORT_SYMBOL_NS_GPL(pmbus_set_page, PMBUS);
int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
{
int rv;
rv = pmbus_set_page(client, page, 0xff);
if (rv < 0)
return rv;
return i2c_smbus_write_byte(client, value);
}
EXPORT_SYMBOL_NS_GPL(pmbus_write_byte, PMBUS);
/*
* _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if
* a device specific mapping function exists and calls it if necessary.
*/
static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
{
struct pmbus_data *data = i2c_get_clientdata(client);
const struct pmbus_driver_info *info = data->info;
int status;
if (info->write_byte) {
status = info->write_byte(client, page, value);
if (status != -ENODATA)
return status;
}
return pmbus_write_byte(client, page, value);
}
int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
u16 word)
{
int rv;
rv = pmbus_set_page(client, page, 0xff);
if (rv < 0)
return rv;
return i2c_smbus_write_word_data(client, reg, word);
}
EXPORT_SYMBOL_NS_GPL(pmbus_write_word_data, PMBUS);
static int pmbus_write_virt_reg(struct i2c_client *client, int page, int reg,
u16 word)
{
int bit;
int id;
int rv;
switch (reg) {
case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
id = reg - PMBUS_VIRT_FAN_TARGET_1;
bit = pmbus_fan_rpm_mask[id];
rv = pmbus_update_fan(client, page, id, bit, bit, word);
break;
default:
rv = -ENXIO;
break;
}
return rv;
}
/*
* _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
*/
static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
u16 word)
{
struct pmbus_data *data = i2c_get_clientdata(client);
const struct pmbus_driver_info *info = data->info;
int status;
if (info->write_word_data) {
status = info->write_word_data(client, page, reg, word);
if (status != -ENODATA)
return status;
}
if (reg >= PMBUS_VIRT_BASE)
return pmbus_write_virt_reg(client, page, reg, word);
return pmbus_write_word_data(client, page, reg, word);
}
/*
* _pmbus_write_byte_data() is similar to pmbus_write_byte_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
*/
static int _pmbus_write_byte_data(struct i2c_client *client, int page, int reg, u8 value)
{
struct pmbus_data *data = i2c_get_clientdata(client);
const struct pmbus_driver_info *info = data->info;
int status;
if (info->write_byte_data) {
status = info->write_byte_data(client, page, reg, value);
if (status != -ENODATA)
return status;
}
return pmbus_write_byte_data(client, page, reg, value);
}
/*
* _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
*/
static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg)
{
struct pmbus_data *data = i2c_get_clientdata(client);
const struct pmbus_driver_info *info = data->info;
int status;
if (info->read_byte_data) {
status = info->read_byte_data(client, page, reg);
if (status != -ENODATA)
return status;
}
return pmbus_read_byte_data(client, page, reg);
}
int pmbus_update_fan(struct i2c_client *client, int page, int id,
u8 config, u8 mask, u16 command)
{
int from;
int rv;
u8 to;
from = _pmbus_read_byte_data(client, page,
pmbus_fan_config_registers[id]);
if (from < 0)
return from;
to = (from & ~mask) | (config & mask);
if (to != from) {
rv = _pmbus_write_byte_data(client, page,
pmbus_fan_config_registers[id], to);
if (rv < 0)
return rv;
}
return _pmbus_write_word_data(client, page,
pmbus_fan_command_registers[id], command);
}
EXPORT_SYMBOL_NS_GPL(pmbus_update_fan, PMBUS);
int pmbus_read_word_data(struct i2c_client *client, int page, int phase, u8 reg)
{
int rv;
rv = pmbus_set_page(client, page, phase);
if (rv < 0)
return rv;
return i2c_smbus_read_word_data(client, reg);
}
EXPORT_SYMBOL_NS_GPL(pmbus_read_word_data, PMBUS);
static int pmbus_read_virt_reg(struct i2c_client *client, int page, int reg)
{
int rv;
int id;
switch (reg) {
case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
id = reg - PMBUS_VIRT_FAN_TARGET_1;
rv = pmbus_get_fan_rate_device(client, page, id, rpm);
break;
default:
rv = -ENXIO;
break;
}
return rv;
}
/*
* _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
*/
static int _pmbus_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
struct pmbus_data *data = i2c_get_clientdata(client);
const struct pmbus_driver_info *info = data->info;
int status;
if (info->read_word_data) {
status = info->read_word_data(client, page, phase, reg);
if (status != -ENODATA)
return status;
}
if (reg >= PMBUS_VIRT_BASE)
return pmbus_read_virt_reg(client, page, reg);
return pmbus_read_word_data(client, page, phase, reg);
}
/* Same as above, but without phase parameter, for use in check functions */
static int __pmbus_read_word_data(struct i2c_client *client, int page, int reg)
{
return _pmbus_read_word_data(client, page, 0xff, reg);
}
int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
{
int rv;
rv = pmbus_set_page(client, page, 0xff);
if (rv < 0)
return rv;
return i2c_smbus_read_byte_data(client, reg);
}
EXPORT_SYMBOL_NS_GPL(pmbus_read_byte_data, PMBUS);
int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
{
int rv;
rv = pmbus_set_page(client, page, 0xff);
if (rv < 0)
return rv;
return i2c_smbus_write_byte_data(client, reg, value);
}
EXPORT_SYMBOL_NS_GPL(pmbus_write_byte_data, PMBUS);
int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
u8 mask, u8 value)
{
unsigned int tmp;
int rv;
rv = _pmbus_read_byte_data(client, page, reg);
if (rv < 0)
return rv;
tmp = (rv & ~mask) | (value & mask);
if (tmp != rv)
rv = _pmbus_write_byte_data(client, page, reg, tmp);
return rv;
}
EXPORT_SYMBOL_NS_GPL(pmbus_update_byte_data, PMBUS);
static int pmbus_read_block_data(struct i2c_client *client, int page, u8 reg,
char *data_buf)
{
int rv;
rv = pmbus_set_page(client, page, 0xff);
if (rv < 0)
return rv;
return i2c_smbus_read_block_data(client, reg, data_buf);
}
static struct pmbus_sensor *pmbus_find_sensor(struct pmbus_data *data, int page,
int reg)
{
struct pmbus_sensor *sensor;
for (sensor = data->sensors; sensor; sensor = sensor->next) {
if (sensor->page == page && sensor->reg == reg)
return sensor;
}
return ERR_PTR(-EINVAL);
}
static int pmbus_get_fan_rate(struct i2c_client *client, int page, int id,
enum pmbus_fan_mode mode,
bool from_cache)
{
struct pmbus_data *data = i2c_get_clientdata(client);
bool want_rpm, have_rpm;
struct pmbus_sensor *s;
int config;
int reg;
want_rpm = (mode == rpm);
if (from_cache) {
reg = want_rpm ? PMBUS_VIRT_FAN_TARGET_1 : PMBUS_VIRT_PWM_1;
s = pmbus_find_sensor(data, page, reg + id);
if (IS_ERR(s))
return PTR_ERR(s);
return s->data;
}
config = _pmbus_read_byte_data(client, page,
pmbus_fan_config_registers[id]);
if (config < 0)
return config;
have_rpm = !!(config & pmbus_fan_rpm_mask[id]);
if (want_rpm == have_rpm)
return pmbus_read_word_data(client, page, 0xff,
pmbus_fan_command_registers[id]);
/* Can't sensibly map between RPM and PWM, just return zero */
return 0;
}
int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
enum pmbus_fan_mode mode)
{
return pmbus_get_fan_rate(client, page, id, mode, false);
}
EXPORT_SYMBOL_NS_GPL(pmbus_get_fan_rate_device, PMBUS);
int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
enum pmbus_fan_mode mode)
{
return pmbus_get_fan_rate(client, page, id, mode, true);
}
EXPORT_SYMBOL_NS_GPL(pmbus_get_fan_rate_cached, PMBUS);
static void pmbus_clear_fault_page(struct i2c_client *client, int page)
{
_pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
}
void pmbus_clear_faults(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
int i;
for (i = 0; i < data->info->pages; i++)
pmbus_clear_fault_page(client, i);
}
EXPORT_SYMBOL_NS_GPL(pmbus_clear_faults, PMBUS);
static int pmbus_check_status_cml(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
int status, status2;
status = data->read_status(client, -1);
if (status < 0 || (status & PB_STATUS_CML)) {
status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
return -EIO;
}
return 0;
}
static bool pmbus_check_register(struct i2c_client *client,
int (*func)(struct i2c_client *client,
int page, int reg),
int page, int reg)
{
int rv;
struct pmbus_data *data = i2c_get_clientdata(client);
rv = func(client, page, reg);
if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
rv = pmbus_check_status_cml(client);
if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
data->read_status(client, -1);
if (reg < PMBUS_VIRT_BASE)
pmbus_clear_fault_page(client, -1);
return rv >= 0;
}
static bool pmbus_check_status_register(struct i2c_client *client, int page)
{
int status;
struct pmbus_data *data = i2c_get_clientdata(client);
status = data->read_status(client, page);
if (status >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK) &&
(status & PB_STATUS_CML)) {
status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
if (status < 0 || (status & PB_CML_FAULT_INVALID_COMMAND))
status = -EIO;
}
pmbus_clear_fault_page(client, -1);
return status >= 0;
}
bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
{
return pmbus_check_register(client, _pmbus_read_byte_data, page, reg);
}
EXPORT_SYMBOL_NS_GPL(pmbus_check_byte_register, PMBUS);
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
{
return pmbus_check_register(client, __pmbus_read_word_data, page, reg);
}
EXPORT_SYMBOL_NS_GPL(pmbus_check_word_register, PMBUS);
static bool __maybe_unused pmbus_check_block_register(struct i2c_client *client,
int page, int reg)
{
int rv;
struct pmbus_data *data = i2c_get_clientdata(client);
char data_buf[I2C_SMBUS_BLOCK_MAX + 2];
rv = pmbus_read_block_data(client, page, reg, data_buf);
if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
rv = pmbus_check_status_cml(client);
if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
data->read_status(client, -1);
pmbus_clear_fault_page(client, -1);
return rv >= 0;
}
const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
return data->info;
}
EXPORT_SYMBOL_NS_GPL(pmbus_get_driver_info, PMBUS);
static int pmbus_get_status(struct i2c_client *client, int page, int reg)
{
struct pmbus_data *data = i2c_get_clientdata(client);
int status;
switch (reg) {
case PMBUS_STATUS_WORD:
status = data->read_status(client, page);
break;
default:
status = _pmbus_read_byte_data(client, page, reg);
break;
}
if (status < 0)
pmbus_clear_faults(client);
return status;
}
static void pmbus_update_sensor_data(struct i2c_client *client, struct pmbus_sensor *sensor)
{
if (sensor->data < 0 || sensor->update)
sensor->data = _pmbus_read_word_data(client, sensor->page,
sensor->phase, sensor->reg);
}
/*
* Convert ieee754 sensor values to milli- or micro-units
* depending on sensor type.
*
* ieee754 data format:
* bit 15: sign
* bit 10..14: exponent
* bit 0..9: mantissa
* exponent=0:
* v=(−1)^signbit * 2^(−14) * 0.significantbits
* exponent=1..30:
* v=(−1)^signbit * 2^(exponent - 15) * 1.significantbits
* exponent=31:
* v=NaN
*
* Add the number mantissa bits into the calculations for simplicity.
* To do that, add '10' to the exponent. By doing that, we can just add
* 0x400 to normal values and get the expected result.
*/
static long pmbus_reg2data_ieee754(struct pmbus_data *data,
struct pmbus_sensor *sensor)
{
int exponent;
bool sign;
long val;
/* only support half precision for now */
sign = sensor->data & 0x8000;
exponent = (sensor->data >> 10) & 0x1f;
val = sensor->data & 0x3ff;
if (exponent == 0) { /* subnormal */
exponent = -(14 + 10);
} else if (exponent == 0x1f) { /* NaN, convert to min/max */
exponent = 0;
val = 65504;
} else {
exponent -= (15 + 10); /* normal */
val |= 0x400;
}
/* scale result to milli-units for all sensors except fans */
if (sensor->class != PSC_FAN)
val = val * 1000L;
/* scale result to micro-units for power sensors */
if (sensor->class == PSC_POWER)
val = val * 1000L;
if (exponent >= 0)
val <<= exponent;
else
val >>= -exponent;
if (sign)
val = -val;
return val;
}
/*
* Convert linear sensor values to milli- or micro-units
* depending on sensor type.
*/
static s64 pmbus_reg2data_linear(struct pmbus_data *data,
struct pmbus_sensor *sensor)
{
s16 exponent;
s32 mantissa;
s64 val;
if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */
exponent = data->exponent[sensor->page];
mantissa = (u16) sensor->data;
} else { /* LINEAR11 */
exponent = ((s16)sensor->data) >> 11;
mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5;
}
val = mantissa;
/* scale result to milli-units for all sensors except fans */
if (sensor->class != PSC_FAN)
val = val * 1000LL;
/* scale result to micro-units for power sensors */
if (sensor->class == PSC_POWER)
val = val * 1000LL;
if (exponent >= 0)
val <<= exponent;
else
val >>= -exponent;
return val;
}
/*
* Convert direct sensor values to milli- or micro-units
* depending on sensor type.
*/
static s64 pmbus_reg2data_direct(struct pmbus_data *data,
struct pmbus_sensor *sensor)
{
s64 b, val = (s16)sensor->data;
s32 m, R;
m = data->info->m[sensor->class];
b = data->info->b[sensor->class];
R = data->info->R[sensor->class];
if (m == 0)
return 0;
/* X = 1/m * (Y * 10^-R - b) */
R = -R;
/* scale result to milli-units for everything but fans */
if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
R += 3;
b *= 1000;
}
/* scale result to micro-units for power sensors */
if (sensor->class == PSC_POWER) {
R += 3;
b *= 1000;
}
while (R > 0) {
val *= 10;
R--;
}
while (R < 0) {
val = div_s64(val + 5LL, 10L); /* round closest */
R++;
}
val = div_s64(val - b, m);
return val;
}
/*
* Convert VID sensor values to milli- or micro-units
* depending on sensor type.
*/
static s64 pmbus_reg2data_vid(struct pmbus_data *data,
struct pmbus_sensor *sensor)
{
long val = sensor->data;
long rv = 0;
switch (data->info->vrm_version[sensor->page]) {
case vr11:
if (val >= 0x02 && val <= 0xb2)
rv = DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
break;
case vr12:
if (val >= 0x01)
rv = 250 + (val - 1) * 5;
break;
case vr13:
if (val >= 0x01)
rv = 500 + (val - 1) * 10;
break;
case imvp9:
if (val >= 0x01)
rv = 200 + (val - 1) * 10;
break;
case amd625mv:
if (val >= 0x0 && val <= 0xd8)
rv = DIV_ROUND_CLOSEST(155000 - val * 625, 100);
break;
}
return rv;
}
static s64 pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
{
s64 val;
if (!sensor->convert)
return sensor->data;
switch (data->info->format[sensor->class]) {
case direct:
val = pmbus_reg2data_direct(data, sensor);
break;
case vid:
val = pmbus_reg2data_vid(data, sensor);
break;
case ieee754:
val = pmbus_reg2data_ieee754(data, sensor);
break;
case linear:
default:
val = pmbus_reg2data_linear(data, sensor);
break;
}
return val;
}
#define MAX_IEEE_MANTISSA (0x7ff * 1000)
#define MIN_IEEE_MANTISSA (0x400 * 1000)
static u16 pmbus_data2reg_ieee754(struct pmbus_data *data,
struct pmbus_sensor *sensor, long val)
{
u16 exponent = (15 + 10);
long mantissa;
u16 sign = 0;
/* simple case */
if (val == 0)
return 0;
if (val < 0) {
sign = 0x8000;
val = -val;
}
/* Power is in uW. Convert to mW before converting. */
if (sensor->class == PSC_POWER)
val = DIV_ROUND_CLOSEST(val, 1000L);
/*
* For simplicity, convert fan data to milli-units
* before calculating the exponent.
*/
if (sensor->class == PSC_FAN)
val = val * 1000;
/* Reduce large mantissa until it fits into 10 bit */
while (val > MAX_IEEE_MANTISSA && exponent < 30) {
exponent++;
val >>= 1;
}
/*
* Increase small mantissa to generate valid 'normal'
* number
*/
while (val < MIN_IEEE_MANTISSA && exponent > 1) {
exponent--;
val <<= 1;
}
/* Convert mantissa from milli-units to units */
mantissa = DIV_ROUND_CLOSEST(val, 1000);
/*
* Ensure that the resulting number is within range.
* Valid range is 0x400..0x7ff, where bit 10 reflects
* the implied high bit in normalized ieee754 numbers.
* Set the range to 0x400..0x7ff to reflect this.
* The upper bit is then removed by the mask against
* 0x3ff in the final assignment.
*/
if (mantissa > 0x7ff)
mantissa = 0x7ff;
else if (mantissa < 0x400)
mantissa = 0x400;
/* Convert to sign, 5 bit exponent, 10 bit mantissa */
return sign | (mantissa & 0x3ff) | ((exponent << 10) & 0x7c00);
}
#define MAX_LIN_MANTISSA (1023 * 1000)
#define MIN_LIN_MANTISSA (511 * 1000)
static u16 pmbus_data2reg_linear(struct pmbus_data *data,
struct pmbus_sensor *sensor, s64 val)
{
s16 exponent = 0, mantissa;
bool negative = false;
/* simple case */
if (val == 0)
return 0;
if (sensor->class == PSC_VOLTAGE_OUT) {
/* LINEAR16 does not support negative voltages */
if (val < 0)
return 0;
/*
* For a static exponents, we don't have a choice
* but to adjust the value to it.
*/
if (data->exponent[sensor->page] < 0)
val <<= -data->exponent[sensor->page];
else
val >>= data->exponent[sensor->page];
val = DIV_ROUND_CLOSEST_ULL(val, 1000);
return clamp_val(val, 0, 0xffff);
}
if (val < 0) {
negative = true;
val = -val;
}
/* Power is in uW. Convert to mW before converting. */
if (sensor->class == PSC_POWER)
val = DIV_ROUND_CLOSEST_ULL(val, 1000);
/*
* For simplicity, convert fan data to milli-units
* before calculating the exponent.
*/
if (sensor->class == PSC_FAN)
val = val * 1000LL;
/* Reduce large mantissa until it fits into 10 bit */
while (val >= MAX_LIN_MANTISSA && exponent < 15) {
exponent++;
val >>= 1;
}
/* Increase small mantissa to improve precision */
while (val < MIN_LIN_MANTISSA && exponent > -15) {
exponent--;
val <<= 1;
}
/* Convert mantissa from milli-units to units */
mantissa = clamp_val(DIV_ROUND_CLOSEST_ULL(val, 1000), 0, 0x3ff);
/* restore sign */
if (negative)
mantissa = -mantissa;
/* Convert to 5 bit exponent, 11 bit mantissa */
return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
}
static u16 pmbus_data2reg_direct(struct pmbus_data *data,
struct pmbus_sensor *sensor, s64 val)
{
s64 b;
s32 m, R;
m = data->info->m[sensor->class];
b = data->info->b[sensor->class];
R = data->info->R[sensor->class];
/* Power is in uW. Adjust R and b. */
if (sensor->class == PSC_POWER) {
R -= 3;
b *= 1000;
}
/* Calculate Y = (m * X + b) * 10^R */
if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
R -= 3; /* Adjust R and b for data in milli-units */
b *= 1000;
}
val = val * m + b;
while (R > 0) {
val *= 10;
R--;
}
while (R < 0) {
val = div_s64(val + 5LL, 10L); /* round closest */
R++;
}
return (u16)clamp_val(val, S16_MIN, S16_MAX);
}
static u16 pmbus_data2reg_vid(struct pmbus_data *data,
struct pmbus_sensor *sensor, s64 val)
{
val = clamp_val(val, 500, 1600);
return 2 + DIV_ROUND_CLOSEST_ULL((1600LL - val) * 100LL, 625);
}
static u16 pmbus_data2reg(struct pmbus_data *data,
struct pmbus_sensor *sensor, s64 val)
{
u16 regval;
if (!sensor->convert)
return val;
switch (data->info->format[sensor->class]) {
case direct:
regval = pmbus_data2reg_direct(data, sensor, val);
break;
case vid:
regval = pmbus_data2reg_vid(data, sensor, val);
break;
case ieee754:
regval = pmbus_data2reg_ieee754(data, sensor, val);
break;
case linear:
default:
regval = pmbus_data2reg_linear(data, sensor, val);
break;
}
return regval;
}
/*
* Return boolean calculated from converted data.
* <index> defines a status register index and mask.
* The mask is in the lower 8 bits, the register index is in bits 8..23.
*
* The associated pmbus_boolean structure contains optional pointers to two
* sensor attributes. If specified, those attributes are compared against each
* other to determine if a limit has been exceeded.
*
* If the sensor attribute pointers are NULL, the function returns true if
* (status[reg] & mask) is true.
*
* If sensor attribute pointers are provided, a comparison against a specified
* limit has to be performed to determine the boolean result.
* In this case, the function returns true if v1 >= v2 (where v1 and v2 are
* sensor values referenced by sensor attribute pointers s1 and s2).
*
* To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>.
* To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>.
*
* If a negative value is stored in any of the referenced registers, this value
* reflects an error code which will be returned.
*/
static int pmbus_get_boolean(struct i2c_client *client, struct pmbus_boolean *b,
int index)
{
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor *s1 = b->s1;
struct pmbus_sensor *s2 = b->s2;
u16 mask = pb_index_to_mask(index);
u8 page = pb_index_to_page(index);
u16 reg = pb_index_to_reg(index);
int ret, status;
u16 regval;
mutex_lock(&data->update_lock);
status = pmbus_get_status(client, page, reg);
if (status < 0) {
ret = status;
goto unlock;
}
if (s1)
pmbus_update_sensor_data(client, s1);
if (s2)
pmbus_update_sensor_data(client, s2);
regval = status & mask;
if (regval) {
ret = _pmbus_write_byte_data(client, page, reg, regval);
if (ret)
goto unlock;
}
if (s1 && s2) {
s64 v1, v2;
if (s1->data < 0) {
ret = s1->data;
goto unlock;
}
if (s2->data < 0) {
ret = s2->data;
goto unlock;
}
v1 = pmbus_reg2data(data, s1);
v2 = pmbus_reg2data(data, s2);
ret = !!(regval && v1 >= v2);
} else {
ret = !!regval;
}
unlock:
mutex_unlock(&data->update_lock);
return ret;
}
static ssize_t pmbus_show_boolean(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct pmbus_boolean *boolean = to_pmbus_boolean(attr);
struct i2c_client *client = to_i2c_client(dev->parent);
int val;
val = pmbus_get_boolean(client, boolean, attr->index);
if (val < 0)
return val;
return sysfs_emit(buf, "%d\n", val);
}
static ssize_t pmbus_show_sensor(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
struct pmbus_data *data = i2c_get_clientdata(client);
ssize_t ret;
mutex_lock(&data->update_lock);
pmbus_update_sensor_data(client, sensor);
if (sensor->data < 0)
ret = sensor->data;
else
ret = sysfs_emit(buf, "%lld\n", pmbus_reg2data(data, sensor));
mutex_unlock(&data->update_lock);
return ret;
}
static ssize_t pmbus_set_sensor(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
ssize_t rv = count;
s64 val;
int ret;
u16 regval;
if (kstrtos64(buf, 10, &val) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
regval = pmbus_data2reg(data, sensor, val);
ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
if (ret < 0)
rv = ret;
else
sensor->data = -ENODATA;
mutex_unlock(&data->update_lock);
return rv;
}
static ssize_t pmbus_show_label(struct device *dev,
struct device_attribute *da, char *buf)
{
struct pmbus_label *label = to_pmbus_label(da);
return sysfs_emit(buf, "%s\n", label->label);
}
static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
{
if (data->num_attributes >= data->max_attributes - 1) {
int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
void *new_attrs = devm_krealloc_array(data->dev, data->group.attrs,
new_max_attrs, sizeof(void *),
GFP_KERNEL);
if (!new_attrs)
return -ENOMEM;
data->group.attrs = new_attrs;
data->max_attributes = new_max_attrs;
}
data->group.attrs[data->num_attributes++] = attr;
data->group.attrs[data->num_attributes] = NULL;
return 0;
}
static void pmbus_dev_attr_init(struct device_attribute *dev_attr,
const char *name,
umode_t mode,
ssize_t (*show)(struct device *dev,
struct device_attribute *attr,
char *buf),
ssize_t (*store)(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count))
{
sysfs_attr_init(&dev_attr->attr);
dev_attr->attr.name = name;
dev_attr->attr.mode = mode;
dev_attr->show = show;
dev_attr->store = store;
}
static void pmbus_attr_init(struct sensor_device_attribute *a,
const char *name,
umode_t mode,
ssize_t (*show)(struct device *dev,
struct device_attribute *attr,
char *buf),
ssize_t (*store)(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count),
int idx)
{
pmbus_dev_attr_init(&a->dev_attr, name, mode, show, store);
a->index = idx;
}
static int pmbus_add_boolean(struct pmbus_data *data,
const char *name, const char *type, int seq,
struct pmbus_sensor *s1,
struct pmbus_sensor *s2,
u8 page, u16 reg, u16 mask)
{
struct pmbus_boolean *boolean;
struct sensor_device_attribute *a;
if (WARN((s1 && !s2) || (!s1 && s2), "Bad s1/s2 parameters\n"))
return -EINVAL;
boolean = devm_kzalloc(data->dev, sizeof(*boolean), GFP_KERNEL);
if (!boolean)
return -ENOMEM;
a = &boolean->attribute;
snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s",
name, seq, type);
boolean->s1 = s1;
boolean->s2 = s2;
pmbus_attr_init(a, boolean->name, 0444, pmbus_show_boolean, NULL,
pb_reg_to_index(page, reg, mask));
return pmbus_add_attribute(data, &a->dev_attr.attr);
}
/* of thermal for pmbus temperature sensors */
struct pmbus_thermal_data {
struct pmbus_data *pmbus_data;
struct pmbus_sensor *sensor;
};
static int pmbus_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
{
struct pmbus_thermal_data *tdata = thermal_zone_device_priv(tz);
struct pmbus_sensor *sensor = tdata->sensor;
struct pmbus_data *pmbus_data = tdata->pmbus_data;
struct i2c_client *client = to_i2c_client(pmbus_data->dev);
struct device *dev = pmbus_data->hwmon_dev;
int ret = 0;
if (!dev) {
/* May not even get to hwmon yet */
*temp = 0;
return 0;
}
mutex_lock(&pmbus_data->update_lock);
pmbus_update_sensor_data(client, sensor);
if (sensor->data < 0)
ret = sensor->data;
else
*temp = (int)pmbus_reg2data(pmbus_data, sensor);
mutex_unlock(&pmbus_data->update_lock);
return ret;
}
static const struct thermal_zone_device_ops pmbus_thermal_ops = {
.get_temp = pmbus_thermal_get_temp,
};
static int pmbus_thermal_add_sensor(struct pmbus_data *pmbus_data,
struct pmbus_sensor *sensor, int index)
{
struct device *dev = pmbus_data->dev;
struct pmbus_thermal_data *tdata;
struct thermal_zone_device *tzd;
tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL);
if (!tdata)
return -ENOMEM;
tdata->sensor = sensor;
tdata->pmbus_data = pmbus_data;
tzd = devm_thermal_of_zone_register(dev, index, tdata,
&pmbus_thermal_ops);
/*
* If CONFIG_THERMAL_OF is disabled, this returns -ENODEV,
* so ignore that error but forward any other error.
*/
if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV))
return PTR_ERR(tzd);
return 0;
}
static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
const char *name, const char *type,
int seq, int page, int phase,
int reg,
enum pmbus_sensor_classes class,
bool update, bool readonly,
bool convert)
{
struct pmbus_sensor *sensor;
struct device_attribute *a;
sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor)
return NULL;
a = &sensor->attribute;
if (type)
snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
name, seq, type);
else
snprintf(sensor->name, sizeof(sensor->name), "%s%d",
name, seq);
if (data->flags & PMBUS_WRITE_PROTECTED)
readonly = true;
sensor->page = page;
sensor->phase = phase;
sensor->reg = reg;
sensor->class = class;
sensor->update = update;
sensor->convert = convert;
sensor->data = -ENODATA;
pmbus_dev_attr_init(a, sensor->name,
readonly ? 0444 : 0644,
pmbus_show_sensor, pmbus_set_sensor);
if (pmbus_add_attribute(data, &a->attr))
return NULL;
sensor->next = data->sensors;
data->sensors = sensor;
/* temperature sensors with _input values are registered with thermal */
if (class == PSC_TEMPERATURE && strcmp(type, "input") == 0)
pmbus_thermal_add_sensor(data, sensor, seq);
return sensor;
}
static int pmbus_add_label(struct pmbus_data *data,
const char *name, int seq,
const char *lstring, int index, int phase)
{
struct pmbus_label *label;
struct device_attribute *a;
label = devm_kzalloc(data->dev, sizeof(*label), GFP_KERNEL);
if (!label)
return -ENOMEM;
a = &label->attribute;
snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
if (!index) {
if (phase == 0xff)
strncpy(label->label, lstring,
sizeof(label->label) - 1);
else
snprintf(label->label, sizeof(label->label), "%s.%d",
lstring, phase);
} else {
if (phase == 0xff)
snprintf(label->label, sizeof(label->label), "%s%d",
lstring, index);
else
snprintf(label->label, sizeof(label->label), "%s%d.%d",
lstring, index, phase);
}
pmbus_dev_attr_init(a, label->name, 0444, pmbus_show_label, NULL);
return pmbus_add_attribute(data, &a->attr);
}
/*
* Search for attributes. Allocate sensors, booleans, and labels as needed.
*/
/*
* The pmbus_limit_attr structure describes a single limit attribute
* and its associated alarm attribute.
*/
struct pmbus_limit_attr {
u16 reg; /* Limit register */
u16 sbit; /* Alarm attribute status bit */
bool update; /* True if register needs updates */
bool low; /* True if low limit; for limits with compare
functions only */
const char *attr; /* Attribute name */
const char *alarm; /* Alarm attribute name */
};
/*
* The pmbus_sensor_attr structure describes one sensor attribute. This
* description includes a reference to the associated limit attributes.
*/
struct pmbus_sensor_attr {
u16 reg; /* sensor register */
u16 gbit; /* generic status bit */
u8 nlimit; /* # of limit registers */
enum pmbus_sensor_classes class;/* sensor class */
const char *label; /* sensor label */
bool paged; /* true if paged sensor */
bool update; /* true if update needed */
bool compare; /* true if compare function needed */
u32 func; /* sensor mask */
u32 sfunc; /* sensor status mask */
int sreg; /* status register */
const struct pmbus_limit_attr *limit;/* limit registers */
};
/*
* Add a set of limit attributes and, if supported, the associated
* alarm attributes.
* returns 0 if no alarm register found, 1 if an alarm register was found,
* < 0 on errors.
*/
static int pmbus_add_limit_attrs(struct i2c_client *client,
struct pmbus_data *data,
const struct pmbus_driver_info *info,
const char *name, int index, int page,
struct pmbus_sensor *base,
const struct pmbus_sensor_attr *attr)
{
const struct pmbus_limit_attr *l = attr->limit;
int nlimit = attr->nlimit;
int have_alarm = 0;
int i, ret;
struct pmbus_sensor *curr;
for (i = 0; i < nlimit; i++) {
if (pmbus_check_word_register(client, page, l->reg)) {
curr = pmbus_add_sensor(data, name, l->attr, index,
page, 0xff, l->reg, attr->class,
attr->update || l->update,
false, true);
if (!curr)
return -ENOMEM;
if (l->sbit && (info->func[page] & attr->sfunc)) {
ret = pmbus_add_boolean(data, name,
l->alarm, index,
attr->compare ? l->low ? curr : base
: NULL,
attr->compare ? l->low ? base : curr
: NULL,
page, attr->sreg, l->sbit);
if (ret)
return ret;
have_alarm = 1;
}
}
l++;
}
return have_alarm;
}
static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
struct pmbus_data *data,
const struct pmbus_driver_info *info,
const char *name,
int index, int page, int phase,
const struct pmbus_sensor_attr *attr,
bool paged)
{
struct pmbus_sensor *base;
bool upper = !!(attr->gbit & 0xff00); /* need to check STATUS_WORD */
int ret;
if (attr->label) {
ret = pmbus_add_label(data, name, index, attr->label,
paged ? page + 1 : 0, phase);
if (ret)
return ret;
}
base = pmbus_add_sensor(data, name, "input", index, page, phase,
attr->reg, attr->class, true, true, true);
if (!base)
return -ENOMEM;
/* No limit and alarm attributes for phase specific sensors */
if (attr->sfunc && phase == 0xff) {
ret = pmbus_add_limit_attrs(client, data, info, name,
index, page, base, attr);
if (ret < 0)
return ret;
/*
* Add generic alarm attribute only if there are no individual
* alarm attributes, if there is a global alarm bit, and if
* the generic status register (word or byte, depending on
* which global bit is set) for this page is accessible.
*/
if (!ret && attr->gbit &&
(!upper || data->has_status_word) &&
pmbus_check_status_register(client, page)) {
ret = pmbus_add_boolean(data, name, "alarm", index,
NULL, NULL,
page, PMBUS_STATUS_WORD,
attr->gbit);
if (ret)
return ret;
}
}
return 0;
}
static bool pmbus_sensor_is_paged(const struct pmbus_driver_info *info,
const struct pmbus_sensor_attr *attr)
{
int p;
if (attr->paged)
return true;
/*
* Some attributes may be present on more than one page despite
* not being marked with the paged attribute. If that is the case,
* then treat the sensor as being paged and add the page suffix to the
* attribute name.
* We don't just add the paged attribute to all such attributes, in
* order to maintain the un-suffixed labels in the case where the
* attribute is only on page 0.
*/
for (p = 1; p < info->pages; p++) {
if (info->func[p] & attr->func)
return true;
}
return false;
}
static int pmbus_add_sensor_attrs(struct i2c_client *client,
struct pmbus_data *data,
const char *name,
const struct pmbus_sensor_attr *attrs,
int nattrs)
{
const struct pmbus_driver_info *info = data->info;
int index, i;
int ret;
index = 1;
for (i = 0; i < nattrs; i++) {
int page, pages;
bool paged = pmbus_sensor_is_paged(info, attrs);
pages = paged ? info->pages : 1;
for (page = 0; page < pages; page++) {
if (info->func[page] & attrs->func) {
ret = pmbus_add_sensor_attrs_one(client, data, info,
name, index, page,
0xff, attrs, paged);
if (ret)
return ret;
index++;
}
if (info->phases[page]) {
int phase;
for (phase = 0; phase < info->phases[page];
phase++) {
if (!(info->pfunc[phase] & attrs->func))
continue;
ret = pmbus_add_sensor_attrs_one(client,
data, info, name, index, page,
phase, attrs, paged);
if (ret)
return ret;
index++;
}
}
}
attrs++;
}
return 0;
}
static const struct pmbus_limit_attr vin_limit_attrs[] = {
{
.reg = PMBUS_VIN_UV_WARN_LIMIT,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_VOLTAGE_UV_WARNING,
}, {
.reg = PMBUS_VIN_UV_FAULT_LIMIT,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_VOLTAGE_UV_FAULT | PB_VOLTAGE_VIN_OFF,
}, {
.reg = PMBUS_VIN_OV_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_VOLTAGE_OV_WARNING,
}, {
.reg = PMBUS_VIN_OV_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_VOLTAGE_OV_FAULT,
}, {
.reg = PMBUS_VIRT_READ_VIN_AVG,
.update = true,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_VIN_MIN,
.update = true,
.attr = "lowest",
}, {
.reg = PMBUS_VIRT_READ_VIN_MAX,
.update = true,
.attr = "highest",
}, {
.reg = PMBUS_VIRT_RESET_VIN_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_VIN_MIN,
.attr = "rated_min",
}, {
.reg = PMBUS_MFR_VIN_MAX,
.attr = "rated_max",
},
};
static const struct pmbus_limit_attr vmon_limit_attrs[] = {
{
.reg = PMBUS_VIRT_VMON_UV_WARN_LIMIT,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_VOLTAGE_UV_WARNING,
}, {
.reg = PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_VOLTAGE_UV_FAULT,
}, {
.reg = PMBUS_VIRT_VMON_OV_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_VOLTAGE_OV_WARNING,
}, {
.reg = PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_VOLTAGE_OV_FAULT,
}
};
static const struct pmbus_limit_attr vout_limit_attrs[] = {
{
.reg = PMBUS_VOUT_UV_WARN_LIMIT,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_VOLTAGE_UV_WARNING,
}, {
.reg = PMBUS_VOUT_UV_FAULT_LIMIT,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_VOLTAGE_UV_FAULT,
}, {
.reg = PMBUS_VOUT_OV_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_VOLTAGE_OV_WARNING,
}, {
.reg = PMBUS_VOUT_OV_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_VOLTAGE_OV_FAULT,
}, {
.reg = PMBUS_VIRT_READ_VOUT_AVG,
.update = true,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_VOUT_MIN,
.update = true,
.attr = "lowest",
}, {
.reg = PMBUS_VIRT_READ_VOUT_MAX,
.update = true,
.attr = "highest",
}, {
.reg = PMBUS_VIRT_RESET_VOUT_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_VOUT_MIN,
.attr = "rated_min",
}, {
.reg = PMBUS_MFR_VOUT_MAX,
.attr = "rated_max",
},
};
static const struct pmbus_sensor_attr voltage_attributes[] = {
{
.reg = PMBUS_READ_VIN,
.class = PSC_VOLTAGE_IN,
.label = "vin",
.func = PMBUS_HAVE_VIN,
.sfunc = PMBUS_HAVE_STATUS_INPUT,
.sreg = PMBUS_STATUS_INPUT,
.gbit = PB_STATUS_VIN_UV,
.limit = vin_limit_attrs,
.nlimit = ARRAY_SIZE(vin_limit_attrs),
}, {
.reg = PMBUS_VIRT_READ_VMON,
.class = PSC_VOLTAGE_IN,
.label = "vmon",
.func = PMBUS_HAVE_VMON,
.sfunc = PMBUS_HAVE_STATUS_VMON,
.sreg = PMBUS_VIRT_STATUS_VMON,
.limit = vmon_limit_attrs,
.nlimit = ARRAY_SIZE(vmon_limit_attrs),
}, {
.reg = PMBUS_READ_VCAP,
.class = PSC_VOLTAGE_IN,
.label = "vcap",
.func = PMBUS_HAVE_VCAP,
}, {
.reg = PMBUS_READ_VOUT,
.class = PSC_VOLTAGE_OUT,
.label = "vout",
.paged = true,
.func = PMBUS_HAVE_VOUT,
.sfunc = PMBUS_HAVE_STATUS_VOUT,
.sreg = PMBUS_STATUS_VOUT,
.gbit = PB_STATUS_VOUT_OV,
.limit = vout_limit_attrs,
.nlimit = ARRAY_SIZE(vout_limit_attrs),
}
};
/* Current attributes */
static const struct pmbus_limit_attr iin_limit_attrs[] = {
{
.reg = PMBUS_IIN_OC_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_IIN_OC_WARNING,
}, {
.reg = PMBUS_IIN_OC_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_IIN_OC_FAULT,
}, {
.reg = PMBUS_VIRT_READ_IIN_AVG,
.update = true,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_IIN_MIN,
.update = true,
.attr = "lowest",
}, {
.reg = PMBUS_VIRT_READ_IIN_MAX,
.update = true,
.attr = "highest",
}, {
.reg = PMBUS_VIRT_RESET_IIN_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_IIN_MAX,
.attr = "rated_max",
},
};
static const struct pmbus_limit_attr iout_limit_attrs[] = {
{
.reg = PMBUS_IOUT_OC_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_IOUT_OC_WARNING,
}, {
.reg = PMBUS_IOUT_UC_FAULT_LIMIT,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_IOUT_UC_FAULT,
}, {
.reg = PMBUS_IOUT_OC_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_IOUT_OC_FAULT,
}, {
.reg = PMBUS_VIRT_READ_IOUT_AVG,
.update = true,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_IOUT_MIN,
.update = true,
.attr = "lowest",
}, {
.reg = PMBUS_VIRT_READ_IOUT_MAX,
.update = true,
.attr = "highest",
}, {
.reg = PMBUS_VIRT_RESET_IOUT_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_IOUT_MAX,
.attr = "rated_max",
},
};
static const struct pmbus_sensor_attr current_attributes[] = {
{
.reg = PMBUS_READ_IIN,
.class = PSC_CURRENT_IN,
.label = "iin",
.func = PMBUS_HAVE_IIN,
.sfunc = PMBUS_HAVE_STATUS_INPUT,
.sreg = PMBUS_STATUS_INPUT,
.gbit = PB_STATUS_INPUT,
.limit = iin_limit_attrs,
.nlimit = ARRAY_SIZE(iin_limit_attrs),
}, {
.reg = PMBUS_READ_IOUT,
.class = PSC_CURRENT_OUT,
.label = "iout",
.paged = true,
.func = PMBUS_HAVE_IOUT,
.sfunc = PMBUS_HAVE_STATUS_IOUT,
.sreg = PMBUS_STATUS_IOUT,
.gbit = PB_STATUS_IOUT_OC,
.limit = iout_limit_attrs,
.nlimit = ARRAY_SIZE(iout_limit_attrs),
}
};
/* Power attributes */
static const struct pmbus_limit_attr pin_limit_attrs[] = {
{
.reg = PMBUS_PIN_OP_WARN_LIMIT,
.attr = "max",
.alarm = "alarm",
.sbit = PB_PIN_OP_WARNING,
}, {
.reg = PMBUS_VIRT_READ_PIN_AVG,
.update = true,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_PIN_MIN,
.update = true,
.attr = "input_lowest",
}, {
.reg = PMBUS_VIRT_READ_PIN_MAX,
.update = true,
.attr = "input_highest",
}, {
.reg = PMBUS_VIRT_RESET_PIN_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_PIN_MAX,
.attr = "rated_max",
},
};
static const struct pmbus_limit_attr pout_limit_attrs[] = {
{
.reg = PMBUS_POUT_MAX,
.attr = "cap",
.alarm = "cap_alarm",
.sbit = PB_POWER_LIMITING,
}, {
.reg = PMBUS_POUT_OP_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_POUT_OP_WARNING,
}, {
.reg = PMBUS_POUT_OP_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_POUT_OP_FAULT,
}, {
.reg = PMBUS_VIRT_READ_POUT_AVG,
.update = true,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_POUT_MIN,
.update = true,
.attr = "input_lowest",
}, {
.reg = PMBUS_VIRT_READ_POUT_MAX,
.update = true,
.attr = "input_highest",
}, {
.reg = PMBUS_VIRT_RESET_POUT_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_POUT_MAX,
.attr = "rated_max",
},
};
static const struct pmbus_sensor_attr power_attributes[] = {
{
.reg = PMBUS_READ_PIN,
.class = PSC_POWER,
.label = "pin",
.func = PMBUS_HAVE_PIN,
.sfunc = PMBUS_HAVE_STATUS_INPUT,
.sreg = PMBUS_STATUS_INPUT,
.gbit = PB_STATUS_INPUT,
.limit = pin_limit_attrs,
.nlimit = ARRAY_SIZE(pin_limit_attrs),
}, {
.reg = PMBUS_READ_POUT,
.class = PSC_POWER,
.label = "pout",
.paged = true,
.func = PMBUS_HAVE_POUT,
.sfunc = PMBUS_HAVE_STATUS_IOUT,
.sreg = PMBUS_STATUS_IOUT,
.limit = pout_limit_attrs,
.nlimit = ARRAY_SIZE(pout_limit_attrs),
}
};
/* Temperature atributes */
static const struct pmbus_limit_attr temp_limit_attrs[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
.low = true,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_TEMP_UT_WARNING,
}, {
.reg = PMBUS_UT_FAULT_LIMIT,
.low = true,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_TEMP_UT_FAULT,
}, {
.reg = PMBUS_OT_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_TEMP_OT_WARNING,
}, {
.reg = PMBUS_OT_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_TEMP_OT_FAULT,
}, {
.reg = PMBUS_VIRT_READ_TEMP_MIN,
.attr = "lowest",
}, {
.reg = PMBUS_VIRT_READ_TEMP_AVG,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_TEMP_MAX,
.attr = "highest",
}, {
.reg = PMBUS_VIRT_RESET_TEMP_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_MAX_TEMP_1,
.attr = "rated_max",
},
};
static const struct pmbus_limit_attr temp_limit_attrs2[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
.low = true,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_TEMP_UT_WARNING,
}, {
.reg = PMBUS_UT_FAULT_LIMIT,
.low = true,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_TEMP_UT_FAULT,
}, {
.reg = PMBUS_OT_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_TEMP_OT_WARNING,
}, {
.reg = PMBUS_OT_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_TEMP_OT_FAULT,
}, {
.reg = PMBUS_VIRT_READ_TEMP2_MIN,
.attr = "lowest",
}, {
.reg = PMBUS_VIRT_READ_TEMP2_AVG,
.attr = "average",
}, {
.reg = PMBUS_VIRT_READ_TEMP2_MAX,
.attr = "highest",
}, {
.reg = PMBUS_VIRT_RESET_TEMP2_HISTORY,
.attr = "reset_history",
}, {
.reg = PMBUS_MFR_MAX_TEMP_2,
.attr = "rated_max",
},
};
static const struct pmbus_limit_attr temp_limit_attrs3[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
.low = true,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_TEMP_UT_WARNING,
}, {
.reg = PMBUS_UT_FAULT_LIMIT,
.low = true,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_TEMP_UT_FAULT,
}, {
.reg = PMBUS_OT_WARN_LIMIT,
.attr = "max",
.alarm = "max_alarm",
.sbit = PB_TEMP_OT_WARNING,
}, {
.reg = PMBUS_OT_FAULT_LIMIT,
.attr = "crit",
.alarm = "crit_alarm",
.sbit = PB_TEMP_OT_FAULT,
}, {
.reg = PMBUS_MFR_MAX_TEMP_3,
.attr = "rated_max",
},
};
static const struct pmbus_sensor_attr temp_attributes[] = {
{
.reg = PMBUS_READ_TEMPERATURE_1,
.class = PSC_TEMPERATURE,
.paged = true,
.update = true,
.compare = true,
.func = PMBUS_HAVE_TEMP,
.sfunc = PMBUS_HAVE_STATUS_TEMP,
.sreg = PMBUS_STATUS_TEMPERATURE,
.gbit = PB_STATUS_TEMPERATURE,
.limit = temp_limit_attrs,
.nlimit = ARRAY_SIZE(temp_limit_attrs),
}, {
.reg = PMBUS_READ_TEMPERATURE_2,
.class = PSC_TEMPERATURE,
.paged = true,
.update = true,
.compare = true,
.func = PMBUS_HAVE_TEMP2,
.sfunc = PMBUS_HAVE_STATUS_TEMP,
.sreg = PMBUS_STATUS_TEMPERATURE,
.gbit = PB_STATUS_TEMPERATURE,
.limit = temp_limit_attrs2,
.nlimit = ARRAY_SIZE(temp_limit_attrs2),
}, {
.reg = PMBUS_READ_TEMPERATURE_3,
.class = PSC_TEMPERATURE,
.paged = true,
.update = true,
.compare = true,
.func = PMBUS_HAVE_TEMP3,
.sfunc = PMBUS_HAVE_STATUS_TEMP,
.sreg = PMBUS_STATUS_TEMPERATURE,
.gbit = PB_STATUS_TEMPERATURE,
.limit = temp_limit_attrs3,
.nlimit = ARRAY_SIZE(temp_limit_attrs3),
}
};
static const int pmbus_fan_registers[] = {
PMBUS_READ_FAN_SPEED_1,
PMBUS_READ_FAN_SPEED_2,
PMBUS_READ_FAN_SPEED_3,
PMBUS_READ_FAN_SPEED_4
};
static const int pmbus_fan_status_registers[] = {
PMBUS_STATUS_FAN_12,
PMBUS_STATUS_FAN_12,
PMBUS_STATUS_FAN_34,
PMBUS_STATUS_FAN_34
};
static const u32 pmbus_fan_flags[] = {
PMBUS_HAVE_FAN12,
PMBUS_HAVE_FAN12,
PMBUS_HAVE_FAN34,
PMBUS_HAVE_FAN34
};
static const u32 pmbus_fan_status_flags[] = {
PMBUS_HAVE_STATUS_FAN12,
PMBUS_HAVE_STATUS_FAN12,
PMBUS_HAVE_STATUS_FAN34,
PMBUS_HAVE_STATUS_FAN34
};
/* Fans */
/* Precondition: FAN_CONFIG_x_y and FAN_COMMAND_x must exist for the fan ID */
static int pmbus_add_fan_ctrl(struct i2c_client *client,
struct pmbus_data *data, int index, int page, int id,
u8 config)
{
struct pmbus_sensor *sensor;
sensor = pmbus_add_sensor(data, "fan", "target", index, page,
0xff, PMBUS_VIRT_FAN_TARGET_1 + id, PSC_FAN,
false, false, true);
if (!sensor)
return -ENOMEM;
if (!((data->info->func[page] & PMBUS_HAVE_PWM12) ||
(data->info->func[page] & PMBUS_HAVE_PWM34)))
return 0;
sensor = pmbus_add_sensor(data, "pwm", NULL, index, page,
0xff, PMBUS_VIRT_PWM_1 + id, PSC_PWM,
false, false, true);
if (!sensor)
return -ENOMEM;
sensor = pmbus_add_sensor(data, "pwm", "enable", index, page,
0xff, PMBUS_VIRT_PWM_ENABLE_1 + id, PSC_PWM,
true, false, false);
if (!sensor)
return -ENOMEM;
return 0;
}
static int pmbus_add_fan_attributes(struct i2c_client *client,
struct pmbus_data *data)
{
const struct pmbus_driver_info *info = data->info;
int index = 1;
int page;
int ret;
for (page = 0; page < info->pages; page++) {
int f;
for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
int regval;
if (!(info->func[page] & pmbus_fan_flags[f]))
break;
if (!pmbus_check_word_register(client, page,
pmbus_fan_registers[f]))
break;
/*
* Skip fan if not installed.
* Each fan configuration register covers multiple fans,
* so we have to do some magic.
*/
regval = _pmbus_read_byte_data(client, page,
pmbus_fan_config_registers[f]);
if (regval < 0 ||
(!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
continue;
if (pmbus_add_sensor(data, "fan", "input", index,
page, 0xff, pmbus_fan_registers[f],
PSC_FAN, true, true, true) == NULL)
return -ENOMEM;
/* Fan control */
if (pmbus_check_word_register(client, page,
pmbus_fan_command_registers[f])) {
ret = pmbus_add_fan_ctrl(client, data, index,
page, f, regval);
if (ret < 0)
return ret;
}
/*
* Each fan status register covers multiple fans,
* so we have to do some magic.
*/
if ((info->func[page] & pmbus_fan_status_flags[f]) &&
pmbus_check_byte_register(client,
page, pmbus_fan_status_registers[f])) {
int reg;
if (f > 1) /* fan 3, 4 */
reg = PMBUS_STATUS_FAN_34;
else
reg = PMBUS_STATUS_FAN_12;
ret = pmbus_add_boolean(data, "fan",
"alarm", index, NULL, NULL, page, reg,
PB_FAN_FAN1_WARNING >> (f & 1));
if (ret)
return ret;
ret = pmbus_add_boolean(data, "fan",
"fault", index, NULL, NULL, page, reg,
PB_FAN_FAN1_FAULT >> (f & 1));
if (ret)
return ret;
}
index++;
}
}
return 0;
}
struct pmbus_samples_attr {
int reg;
char *name;
};
struct pmbus_samples_reg {
int page;
struct pmbus_samples_attr *attr;
struct device_attribute dev_attr;
};
static struct pmbus_samples_attr pmbus_samples_registers[] = {
{
.reg = PMBUS_VIRT_SAMPLES,
.name = "samples",
}, {
.reg = PMBUS_VIRT_IN_SAMPLES,
.name = "in_samples",
}, {
.reg = PMBUS_VIRT_CURR_SAMPLES,
.name = "curr_samples",
}, {
.reg = PMBUS_VIRT_POWER_SAMPLES,
.name = "power_samples",
}, {
.reg = PMBUS_VIRT_TEMP_SAMPLES,
.name = "temp_samples",
}
};
#define to_samples_reg(x) container_of(x, struct pmbus_samples_reg, dev_attr)
static ssize_t pmbus_show_samples(struct device *dev,
struct device_attribute *devattr, char *buf)
{
int val;
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_samples_reg *reg = to_samples_reg(devattr);
struct pmbus_data *data = i2c_get_clientdata(client);
mutex_lock(&data->update_lock);
val = _pmbus_read_word_data(client, reg->page, 0xff, reg->attr->reg);
mutex_unlock(&data->update_lock);
if (val < 0)
return val;
return sysfs_emit(buf, "%d\n", val);
}
static ssize_t pmbus_set_samples(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
int ret;
long val;
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_samples_reg *reg = to_samples_reg(devattr);
struct pmbus_data *data = i2c_get_clientdata(client);
if (kstrtol(buf, 0, &val) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
ret = _pmbus_write_word_data(client, reg->page, reg->attr->reg, val);
mutex_unlock(&data->update_lock);
return ret ? : count;
}
static int pmbus_add_samples_attr(struct pmbus_data *data, int page,
struct pmbus_samples_attr *attr)
{
struct pmbus_samples_reg *reg;
reg = devm_kzalloc(data->dev, sizeof(*reg), GFP_KERNEL);
if (!reg)
return -ENOMEM;
reg->attr = attr;
reg->page = page;
pmbus_dev_attr_init(&reg->dev_attr, attr->name, 0644,
pmbus_show_samples, pmbus_set_samples);
return pmbus_add_attribute(data, &reg->dev_attr.attr);
}
static int pmbus_add_samples_attributes(struct i2c_client *client,
struct pmbus_data *data)
{
const struct pmbus_driver_info *info = data->info;
int s;
if (!(info->func[0] & PMBUS_HAVE_SAMPLES))
return 0;
for (s = 0; s < ARRAY_SIZE(pmbus_samples_registers); s++) {
struct pmbus_samples_attr *attr;
int ret;
attr = &pmbus_samples_registers[s];
if (!pmbus_check_word_register(client, 0, attr->reg))
continue;
ret = pmbus_add_samples_attr(data, 0, attr);
if (ret)
return ret;
}
return 0;
}
static int pmbus_find_attributes(struct i2c_client *client,
struct pmbus_data *data)
{
int ret;
/* Voltage sensors */
ret = pmbus_add_sensor_attrs(client, data, "in", voltage_attributes,
ARRAY_SIZE(voltage_attributes));
if (ret)
return ret;
/* Current sensors */
ret = pmbus_add_sensor_attrs(client, data, "curr", current_attributes,
ARRAY_SIZE(current_attributes));
if (ret)
return ret;
/* Power sensors */
ret = pmbus_add_sensor_attrs(client, data, "power", power_attributes,
ARRAY_SIZE(power_attributes));
if (ret)
return ret;
/* Temperature sensors */
ret = pmbus_add_sensor_attrs(client, data, "temp", temp_attributes,
ARRAY_SIZE(temp_attributes));
if (ret)
return ret;
/* Fans */
ret = pmbus_add_fan_attributes(client, data);
if (ret)
return ret;
ret = pmbus_add_samples_attributes(client, data);
return ret;
}
/*
* The pmbus_class_attr_map structure maps one sensor class to
* it's corresponding sensor attributes array.
*/
struct pmbus_class_attr_map {
enum pmbus_sensor_classes class;
int nattr;
const struct pmbus_sensor_attr *attr;
};
static const struct pmbus_class_attr_map class_attr_map[] = {
{
.class = PSC_VOLTAGE_IN,
.attr = voltage_attributes,
.nattr = ARRAY_SIZE(voltage_attributes),
}, {
.class = PSC_VOLTAGE_OUT,
.attr = voltage_attributes,
.nattr = ARRAY_SIZE(voltage_attributes),
}, {
.class = PSC_CURRENT_IN,
.attr = current_attributes,
.nattr = ARRAY_SIZE(current_attributes),
}, {
.class = PSC_CURRENT_OUT,
.attr = current_attributes,
.nattr = ARRAY_SIZE(current_attributes),
}, {
.class = PSC_POWER,
.attr = power_attributes,
.nattr = ARRAY_SIZE(power_attributes),
}, {
.class = PSC_TEMPERATURE,
.attr = temp_attributes,
.nattr = ARRAY_SIZE(temp_attributes),
}
};
/*
* Read the coefficients for direct mode.
*/
static int pmbus_read_coefficients(struct i2c_client *client,
struct pmbus_driver_info *info,
const struct pmbus_sensor_attr *attr)
{
int rv;
union i2c_smbus_data data;
enum pmbus_sensor_classes class = attr->class;
s8 R;
s16 m, b;
data.block[0] = 2;
data.block[1] = attr->reg;
data.block[2] = 0x01;
rv = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
I2C_SMBUS_WRITE, PMBUS_COEFFICIENTS,
I2C_SMBUS_BLOCK_PROC_CALL, &data);
if (rv < 0)
return rv;
if (data.block[0] != 5)
return -EIO;
m = data.block[1] | (data.block[2] << 8);
b = data.block[3] | (data.block[4] << 8);
R = data.block[5];
info->m[class] = m;
info->b[class] = b;
info->R[class] = R;
return rv;
}
static int pmbus_init_coefficients(struct i2c_client *client,
struct pmbus_driver_info *info)
{
int i, n, ret = -EINVAL;
const struct pmbus_class_attr_map *map;
const struct pmbus_sensor_attr *attr;
for (i = 0; i < ARRAY_SIZE(class_attr_map); i++) {
map = &class_attr_map[i];
if (info->format[map->class] != direct)
continue;
for (n = 0; n < map->nattr; n++) {
attr = &map->attr[n];
if (map->class != attr->class)
continue;
ret = pmbus_read_coefficients(client, info, attr);
if (ret >= 0)
break;
}
if (ret < 0) {
dev_err(&client->dev,
"No coefficients found for sensor class %d\n",
map->class);
return -EINVAL;
}
}
return 0;
}
/*
* Identify chip parameters.
* This function is called for all chips.
*/
static int pmbus_identify_common(struct i2c_client *client,
struct pmbus_data *data, int page)
{
int vout_mode = -1;
if (pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE))
vout_mode = _pmbus_read_byte_data(client, page,
PMBUS_VOUT_MODE);
if (vout_mode >= 0 && vout_mode != 0xff) {
/*
* Not all chips support the VOUT_MODE command,
* so a failure to read it is not an error.
*/
switch (vout_mode >> 5) {
case 0: /* linear mode */
if (data->info->format[PSC_VOLTAGE_OUT] != linear)
return -ENODEV;
data->exponent[page] = ((s8)(vout_mode << 3)) >> 3;
break;
case 1: /* VID mode */
if (data->info->format[PSC_VOLTAGE_OUT] != vid)
return -ENODEV;
break;
case 2: /* direct mode */
if (data->info->format[PSC_VOLTAGE_OUT] != direct)
return -ENODEV;
break;
case 3: /* ieee 754 half precision */
if (data->info->format[PSC_VOLTAGE_OUT] != ieee754)
return -ENODEV;
break;
default:
return -ENODEV;
}
}
return 0;
}
static int pmbus_read_status_byte(struct i2c_client *client, int page)
{
return _pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
}
static int pmbus_read_status_word(struct i2c_client *client, int page)
{
return _pmbus_read_word_data(client, page, 0xff, PMBUS_STATUS_WORD);
}
/* PEC attribute support */
static ssize_t pec_show(struct device *dev, struct device_attribute *dummy,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
return sysfs_emit(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC));
}
static ssize_t pec_store(struct device *dev, struct device_attribute *dummy,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
bool enable;
int err;
err = kstrtobool(buf, &enable);
if (err < 0)
return err;
if (enable)
client->flags |= I2C_CLIENT_PEC;
else
client->flags &= ~I2C_CLIENT_PEC;
return count;
}
static DEVICE_ATTR_RW(pec);
static void pmbus_remove_pec(void *dev)
{
device_remove_file(dev, &dev_attr_pec);
}
static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
struct pmbus_driver_info *info)
{
struct device *dev = &client->dev;
int page, ret;
/*
* Figure out if PEC is enabled before accessing any other register.
* Make sure PEC is disabled, will be enabled later if needed.
*/
client->flags &= ~I2C_CLIENT_PEC;
/* Enable PEC if the controller and bus supports it */
if (!(data->flags & PMBUS_NO_CAPABILITY)) {
ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK)) {
if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_PEC))
client->flags |= I2C_CLIENT_PEC;
}
}
/*
* Some PMBus chips don't support PMBUS_STATUS_WORD, so try
* to use PMBUS_STATUS_BYTE instead if that is the case.
* Bail out if both registers are not supported.
*/
data->read_status = pmbus_read_status_word;
ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD);
if (ret < 0 || ret == 0xffff) {
data->read_status = pmbus_read_status_byte;
ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE);
if (ret < 0 || ret == 0xff) {
dev_err(dev, "PMBus status register not found\n");
return -ENODEV;
}
} else {
data->has_status_word = true;
}
/*
* Check if the chip is write protected. If it is, we can not clear
* faults, and we should not try it. Also, in that case, writes into
* limit registers need to be disabled.
*/
if (!(data->flags & PMBUS_NO_WRITE_PROTECT)) {
ret = i2c_smbus_read_byte_data(client, PMBUS_WRITE_PROTECT);
if (ret > 0 && (ret & PB_WP_ANY))
data->flags |= PMBUS_WRITE_PROTECTED | PMBUS_SKIP_STATUS_CHECK;
}
if (data->info->pages)
pmbus_clear_faults(client);
else
pmbus_clear_fault_page(client, -1);
if (info->identify) {
ret = (*info->identify)(client, info);
if (ret < 0) {
dev_err(dev, "Chip identification failed\n");
return ret;
}
}
if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
dev_err(dev, "Bad number of PMBus pages: %d\n", info->pages);
return -ENODEV;
}
for (page = 0; page < info->pages; page++) {
ret = pmbus_identify_common(client, data, page);
if (ret < 0) {
dev_err(dev, "Failed to identify chip capabilities\n");
return ret;
}
}
if (data->flags & PMBUS_USE_COEFFICIENTS_CMD) {
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BLOCK_PROC_CALL))
return -ENODEV;
ret = pmbus_init_coefficients(client, info);
if (ret < 0)
return ret;
}
if (client->flags & I2C_CLIENT_PEC) {
/*
* If I2C_CLIENT_PEC is set here, both the I2C adapter and the
* chip support PEC. Add 'pec' attribute to client device to let
* the user control it.
*/
ret = device_create_file(dev, &dev_attr_pec);
if (ret)
return ret;
ret = devm_add_action_or_reset(dev, pmbus_remove_pec, dev);
if (ret)
return ret;
}
return 0;
}
/* A PMBus status flag and the corresponding REGULATOR_ERROR_* and REGULATOR_EVENTS_* flag */
struct pmbus_status_assoc {
int pflag, rflag, eflag;
};
/* PMBus->regulator bit mappings for a PMBus status register */
struct pmbus_status_category {
int func;
int reg;
const struct pmbus_status_assoc *bits; /* zero-terminated */
};
static const struct pmbus_status_category __maybe_unused pmbus_status_flag_map[] = {
{
.func = PMBUS_HAVE_STATUS_VOUT,
.reg = PMBUS_STATUS_VOUT,
.bits = (const struct pmbus_status_assoc[]) {
{ PB_VOLTAGE_UV_WARNING, REGULATOR_ERROR_UNDER_VOLTAGE_WARN,
REGULATOR_EVENT_UNDER_VOLTAGE_WARN },
{ PB_VOLTAGE_UV_FAULT, REGULATOR_ERROR_UNDER_VOLTAGE,
REGULATOR_EVENT_UNDER_VOLTAGE },
{ PB_VOLTAGE_OV_WARNING, REGULATOR_ERROR_OVER_VOLTAGE_WARN,
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
{ PB_VOLTAGE_OV_FAULT, REGULATOR_ERROR_REGULATION_OUT,
REGULATOR_EVENT_OVER_VOLTAGE_WARN },
{ },
},
}, {
.func = PMBUS_HAVE_STATUS_IOUT,
.reg = PMBUS_STATUS_IOUT,
.bits = (const struct pmbus_status_assoc[]) {
{ PB_IOUT_OC_WARNING, REGULATOR_ERROR_OVER_CURRENT_WARN,
REGULATOR_EVENT_OVER_CURRENT_WARN },
{ PB_IOUT_OC_FAULT, REGULATOR_ERROR_OVER_CURRENT,
REGULATOR_EVENT_OVER_CURRENT },
{ PB_IOUT_OC_LV_FAULT, REGULATOR_ERROR_OVER_CURRENT,
REGULATOR_EVENT_OVER_CURRENT },
{ },
},
}, {
.func = PMBUS_HAVE_STATUS_TEMP,
.reg = PMBUS_STATUS_TEMPERATURE,
.bits = (const struct pmbus_status_assoc[]) {
{ PB_TEMP_OT_WARNING, REGULATOR_ERROR_OVER_TEMP_WARN,
REGULATOR_EVENT_OVER_TEMP_WARN },
{ PB_TEMP_OT_FAULT, REGULATOR_ERROR_OVER_TEMP,
REGULATOR_EVENT_OVER_TEMP },
{ },
},
},
};
static int _pmbus_is_enabled(struct i2c_client *client, u8 page)
{
int ret;
ret = _pmbus_read_byte_data(client, page, PMBUS_OPERATION);
if (ret < 0)
return ret;
return !!(ret & PB_OPERATION_CONTROL_ON);
}
static int __maybe_unused pmbus_is_enabled(struct i2c_client *client, u8 page)
{
struct pmbus_data *data = i2c_get_clientdata(client);
int ret;
mutex_lock(&data->update_lock);
ret = _pmbus_is_enabled(client, page);
mutex_unlock(&data->update_lock);
return ret;
}
#define to_dev_attr(_dev_attr) \
container_of(_dev_attr, struct device_attribute, attr)
static void pmbus_notify(struct pmbus_data *data, int page, int reg, int flags)
{
int i;
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
u16 smask = pb_index_to_mask(index);
u8 spage = pb_index_to_page(index);
u16 sreg = pb_index_to_reg(index);
if (reg == sreg && page == spage && (smask & flags)) {
dev_dbg(data->dev, "sysfs notify: %s", da->attr.name);
sysfs_notify(&data->dev->kobj, NULL, da->attr.name);
kobject_uevent(&data->dev->kobj, KOBJ_CHANGE);
flags &= ~smask;
}
if (!flags)
break;
}
}
static int _pmbus_get_flags(struct pmbus_data *data, u8 page, unsigned int *flags,
unsigned int *event, bool notify)
{
int i, status;
const struct pmbus_status_category *cat;
const struct pmbus_status_assoc *bit;
struct device *dev = data->dev;
struct i2c_client *client = to_i2c_client(dev);
int func = data->info->func[page];
*flags = 0;
*event = 0;
for (i = 0; i < ARRAY_SIZE(pmbus_status_flag_map); i++) {
cat = &pmbus_status_flag_map[i];
if (!(func & cat->func))
continue;
status = _pmbus_read_byte_data(client, page, cat->reg);
if (status < 0)
return status;
for (bit = cat->bits; bit->pflag; bit++)
if (status & bit->pflag) {
*flags |= bit->rflag;
*event |= bit->eflag;
}
if (notify && status)
pmbus_notify(data, page, cat->reg, status);
}
/*
* Map what bits of STATUS_{WORD,BYTE} we can to REGULATOR_ERROR_*
* bits. Some of the other bits are tempting (especially for cases
* where we don't have the relevant PMBUS_HAVE_STATUS_*
* functionality), but there's an unfortunate ambiguity in that
* they're defined as indicating a fault *or* a warning, so we can't
* easily determine whether to report REGULATOR_ERROR_<foo> or
* REGULATOR_ERROR_<foo>_WARN.
*/
status = pmbus_get_status(client, page, PMBUS_STATUS_WORD);
if (status < 0)
return status;
if (_pmbus_is_enabled(client, page)) {
if (status & PB_STATUS_OFF) {
*flags |= REGULATOR_ERROR_FAIL;
*event |= REGULATOR_EVENT_FAIL;
}
if (status & PB_STATUS_POWER_GOOD_N) {
*flags |= REGULATOR_ERROR_REGULATION_OUT;
*event |= REGULATOR_EVENT_REGULATION_OUT;
}
}
/*
* Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are
* defined strictly as fault indicators (not warnings).
*/
if (status & PB_STATUS_IOUT_OC) {
*flags |= REGULATOR_ERROR_OVER_CURRENT;
*event |= REGULATOR_EVENT_OVER_CURRENT;
}
if (status & PB_STATUS_VOUT_OV) {
*flags |= REGULATOR_ERROR_REGULATION_OUT;
*event |= REGULATOR_EVENT_FAIL;
}
/*
* If we haven't discovered any thermal faults or warnings via
* PMBUS_STATUS_TEMPERATURE, map PB_STATUS_TEMPERATURE to a warning as
* a (conservative) best-effort interpretation.
*/
if (!(*flags & (REGULATOR_ERROR_OVER_TEMP | REGULATOR_ERROR_OVER_TEMP_WARN)) &&
(status & PB_STATUS_TEMPERATURE)) {
*flags |= REGULATOR_ERROR_OVER_TEMP_WARN;
*event |= REGULATOR_EVENT_OVER_TEMP_WARN;
}
return 0;
}
static int __maybe_unused pmbus_get_flags(struct pmbus_data *data, u8 page, unsigned int *flags,
unsigned int *event, bool notify)
{
int ret;
mutex_lock(&data->update_lock);
ret = _pmbus_get_flags(data, page, flags, event, notify);
mutex_unlock(&data->update_lock);
return ret;
}
#if IS_ENABLED(CONFIG_REGULATOR)
static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
return pmbus_is_enabled(client, rdev_get_id(rdev));
}
static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
u8 page = rdev_get_id(rdev);
int ret;
mutex_lock(&data->update_lock);
ret = pmbus_update_byte_data(client, page, PMBUS_OPERATION,
PB_OPERATION_CONTROL_ON,
enable ? PB_OPERATION_CONTROL_ON : 0);
mutex_unlock(&data->update_lock);
return ret;
}
static int pmbus_regulator_enable(struct regulator_dev *rdev)
{
return _pmbus_regulator_on_off(rdev, 1);
}
static int pmbus_regulator_disable(struct regulator_dev *rdev)
{
return _pmbus_regulator_on_off(rdev, 0);
}
static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
int event;
return pmbus_get_flags(data, rdev_get_id(rdev), flags, &event, false);
}
static int pmbus_regulator_get_status(struct regulator_dev *rdev)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
u8 page = rdev_get_id(rdev);
int status, ret;
int event;
mutex_lock(&data->update_lock);
status = pmbus_get_status(client, page, PMBUS_STATUS_WORD);
if (status < 0) {
ret = status;
goto unlock;
}
if (status & PB_STATUS_OFF) {
ret = REGULATOR_STATUS_OFF;
goto unlock;
}
/* If regulator is ON & reports power good then return ON */
if (!(status & PB_STATUS_POWER_GOOD_N)) {
ret = REGULATOR_STATUS_ON;
goto unlock;
}
ret = _pmbus_get_flags(data, rdev_get_id(rdev), &status, &event, false);
if (ret)
goto unlock;
if (status & (REGULATOR_ERROR_UNDER_VOLTAGE | REGULATOR_ERROR_OVER_CURRENT |
REGULATOR_ERROR_REGULATION_OUT | REGULATOR_ERROR_FAIL | REGULATOR_ERROR_OVER_TEMP)) {
ret = REGULATOR_STATUS_ERROR;
goto unlock;
}
ret = REGULATOR_STATUS_UNDEFINED;
unlock:
mutex_unlock(&data->update_lock);
return ret;
}
static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page)
{
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor s = {
.page = page,
.class = PSC_VOLTAGE_OUT,
.convert = true,
.data = -1,
};
if (data->vout_low[page] < 0) {
if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MIN))
s.data = _pmbus_read_word_data(client, page, 0xff,
PMBUS_MFR_VOUT_MIN);
if (s.data < 0) {
s.data = _pmbus_read_word_data(client, page, 0xff,
PMBUS_VOUT_MARGIN_LOW);
if (s.data < 0)
return s.data;
}
data->vout_low[page] = pmbus_reg2data(data, &s);
}
return data->vout_low[page];
}
static int pmbus_regulator_get_high_margin(struct i2c_client *client, int page)
{
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor s = {
.page = page,
.class = PSC_VOLTAGE_OUT,
.convert = true,
.data = -1,
};
if (data->vout_high[page] < 0) {
if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MAX))
s.data = _pmbus_read_word_data(client, page, 0xff,
PMBUS_MFR_VOUT_MAX);
if (s.data < 0) {
s.data = _pmbus_read_word_data(client, page, 0xff,
PMBUS_VOUT_MARGIN_HIGH);
if (s.data < 0)
return s.data;
}
data->vout_high[page] = pmbus_reg2data(data, &s);
}
return data->vout_high[page];
}
static int pmbus_regulator_get_voltage(struct regulator_dev *rdev)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor s = {
.page = rdev_get_id(rdev),
.class = PSC_VOLTAGE_OUT,
.convert = true,
};
s.data = _pmbus_read_word_data(client, s.page, 0xff, PMBUS_READ_VOUT);
if (s.data < 0)
return s.data;
return (int)pmbus_reg2data(data, &s) * 1000; /* unit is uV */
}
static int pmbus_regulator_set_voltage(struct regulator_dev *rdev, int min_uv,
int max_uv, unsigned int *selector)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
struct pmbus_sensor s = {
.page = rdev_get_id(rdev),
.class = PSC_VOLTAGE_OUT,
.convert = true,
.data = -1,
};
int val = DIV_ROUND_CLOSEST(min_uv, 1000); /* convert to mV */
int low, high;
*selector = 0;
low = pmbus_regulator_get_low_margin(client, s.page);
if (low < 0)
return low;
high = pmbus_regulator_get_high_margin(client, s.page);
if (high < 0)
return high;
/* Make sure we are within margins */
if (low > val)
val = low;
if (high < val)
val = high;
val = pmbus_data2reg(data, &s, val);
return _pmbus_write_word_data(client, s.page, PMBUS_VOUT_COMMAND, (u16)val);
}
static int pmbus_regulator_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
int val, low, high;
if (selector >= rdev->desc->n_voltages ||
selector < rdev->desc->linear_min_sel)
return -EINVAL;
selector -= rdev->desc->linear_min_sel;
val = DIV_ROUND_CLOSEST(rdev->desc->min_uV +
(rdev->desc->uV_step * selector), 1000); /* convert to mV */
low = pmbus_regulator_get_low_margin(client, rdev_get_id(rdev));
if (low < 0)
return low;
high = pmbus_regulator_get_high_margin(client, rdev_get_id(rdev));
if (high < 0)
return high;
if (val >= low && val <= high)
return val * 1000; /* unit is uV */
return 0;
}
const struct regulator_ops pmbus_regulator_ops = {
.enable = pmbus_regulator_enable,
.disable = pmbus_regulator_disable,
.is_enabled = pmbus_regulator_is_enabled,
.get_error_flags = pmbus_regulator_get_error_flags,
.get_status = pmbus_regulator_get_status,
.get_voltage = pmbus_regulator_get_voltage,
.set_voltage = pmbus_regulator_set_voltage,
.list_voltage = pmbus_regulator_list_voltage,
};
EXPORT_SYMBOL_NS_GPL(pmbus_regulator_ops, PMBUS);
static int pmbus_regulator_register(struct pmbus_data *data)
{
struct device *dev = data->dev;
const struct pmbus_driver_info *info = data->info;
const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
int i;
data->rdevs = devm_kzalloc(dev, sizeof(struct regulator_dev *) * info->num_regulators,
GFP_KERNEL);
if (!data->rdevs)
return -ENOMEM;
for (i = 0; i < info->num_regulators; i++) {
struct regulator_config config = { };
config.dev = dev;
config.driver_data = data;
if (pdata && pdata->reg_init_data)
config.init_data = &pdata->reg_init_data[i];
data->rdevs[i] = devm_regulator_register(dev, &info->reg_desc[i],
&config);
if (IS_ERR(data->rdevs[i]))
return dev_err_probe(dev, PTR_ERR(data->rdevs[i]),
"Failed to register %s regulator\n",
info->reg_desc[i].name);
}
return 0;
}
static int pmbus_regulator_notify(struct pmbus_data *data, int page, int event)
{
int j;
for (j = 0; j < data->info->num_regulators; j++) {
if (page == rdev_get_id(data->rdevs[j])) {
regulator_notifier_call_chain(data->rdevs[j], event, NULL);
break;
}
}
return 0;
}
#else
static int pmbus_regulator_register(struct pmbus_data *data)
{
return 0;
}
static int pmbus_regulator_notify(struct pmbus_data *data, int page, int event)
{
return 0;
}
#endif
static int pmbus_write_smbalert_mask(struct i2c_client *client, u8 page, u8 reg, u8 val)
{
return pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8));
}
static irqreturn_t pmbus_fault_handler(int irq, void *pdata)
{
struct pmbus_data *data = pdata;
struct i2c_client *client = to_i2c_client(data->dev);
int i, status, event;
mutex_lock(&data->update_lock);
for (i = 0; i < data->info->pages; i++) {
_pmbus_get_flags(data, i, &status, &event, true);
if (event)
pmbus_regulator_notify(data, i, event);
}
pmbus_clear_faults(client);
mutex_unlock(&data->update_lock);
return IRQ_HANDLED;
}
static int pmbus_irq_setup(struct i2c_client *client, struct pmbus_data *data)
{
struct device *dev = &client->dev;
const struct pmbus_status_category *cat;
const struct pmbus_status_assoc *bit;
int i, j, err, func;
u8 mask;
static const u8 misc_status[] = {PMBUS_STATUS_CML, PMBUS_STATUS_OTHER,
PMBUS_STATUS_MFR_SPECIFIC, PMBUS_STATUS_FAN_12,
PMBUS_STATUS_FAN_34};
if (!client->irq)
return 0;
for (i = 0; i < data->info->pages; i++) {
func = data->info->func[i];
for (j = 0; j < ARRAY_SIZE(pmbus_status_flag_map); j++) {
cat = &pmbus_status_flag_map[j];
if (!(func & cat->func))
continue;
mask = 0;
for (bit = cat->bits; bit->pflag; bit++)
mask |= bit->pflag;
err = pmbus_write_smbalert_mask(client, i, cat->reg, ~mask);
if (err)
dev_dbg_once(dev, "Failed to set smbalert for reg 0x%02x\n",
cat->reg);
}
for (j = 0; j < ARRAY_SIZE(misc_status); j++)
pmbus_write_smbalert_mask(client, i, misc_status[j], 0xff);
}
/* Register notifiers */
err = devm_request_threaded_irq(dev, client->irq, NULL, pmbus_fault_handler,
IRQF_ONESHOT, "pmbus-irq", data);
if (err) {
dev_err(dev, "failed to request an irq %d\n", err);
return err;
}
return 0;
}
static struct dentry *pmbus_debugfs_dir; /* pmbus debugfs directory */
#if IS_ENABLED(CONFIG_DEBUG_FS)
static int pmbus_debugfs_get(void *data, u64 *val)
{
int rc;
struct pmbus_debugfs_entry *entry = data;
struct pmbus_data *pdata = i2c_get_clientdata(entry->client);
rc = mutex_lock_interruptible(&pdata->update_lock);
if (rc)
return rc;
rc = _pmbus_read_byte_data(entry->client, entry->page, entry->reg);
mutex_unlock(&pdata->update_lock);
if (rc < 0)
return rc;
*val = rc;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops, pmbus_debugfs_get, NULL,
"0x%02llx\n");
static int pmbus_debugfs_get_status(void *data, u64 *val)
{
int rc;
struct pmbus_debugfs_entry *entry = data;
struct pmbus_data *pdata = i2c_get_clientdata(entry->client);
rc = mutex_lock_interruptible(&pdata->update_lock);
if (rc)
return rc;
rc = pdata->read_status(entry->client, entry->page);
mutex_unlock(&pdata->update_lock);
if (rc < 0)
return rc;
*val = rc;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops_status, pmbus_debugfs_get_status,
NULL, "0x%04llx\n");
static ssize_t pmbus_debugfs_mfr_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
int rc;
struct pmbus_debugfs_entry *entry = file->private_data;
struct pmbus_data *pdata = i2c_get_clientdata(entry->client);
char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
rc = mutex_lock_interruptible(&pdata->update_lock);
if (rc)
return rc;
rc = pmbus_read_block_data(entry->client, entry->page, entry->reg,
data);
mutex_unlock(&pdata->update_lock);
if (rc < 0)
return rc;
/* Add newline at the end of a read data */
data[rc] = '\n';
/* Include newline into the length */
rc += 1;
return simple_read_from_buffer(buf, count, ppos, data, rc);
}
static const struct file_operations pmbus_debugfs_ops_mfr = {
.llseek = noop_llseek,
.read = pmbus_debugfs_mfr_read,
.write = NULL,
.open = simple_open,
};
static void pmbus_remove_debugfs(void *data)
{
struct dentry *entry = data;
debugfs_remove_recursive(entry);
}
static int pmbus_init_debugfs(struct i2c_client *client,
struct pmbus_data *data)
{
int i, idx = 0;
char name[PMBUS_NAME_SIZE];
struct pmbus_debugfs_entry *entries;
if (!pmbus_debugfs_dir)
return -ENODEV;
/*
* Create the debugfs directory for this device. Use the hwmon device
* name to avoid conflicts (hwmon numbers are globally unique).
*/
data->debugfs = debugfs_create_dir(dev_name(data->hwmon_dev),
pmbus_debugfs_dir);
if (IS_ERR_OR_NULL(data->debugfs)) {
data->debugfs = NULL;
return -ENODEV;
}
/*
* Allocate the max possible entries we need.
* 6 entries device-specific
* 10 entries page-specific
*/
entries = devm_kcalloc(data->dev,
6 + data->info->pages * 10, sizeof(*entries),
GFP_KERNEL);
if (!entries)
return -ENOMEM;
/*
* Add device-specific entries.
* Please note that the PMBUS standard allows all registers to be
* page-specific.
* To reduce the number of debugfs entries for devices with many pages
* assume that values of the following registers are the same for all
* pages and report values only for page 0.
*/
if (pmbus_check_block_register(client, 0, PMBUS_MFR_ID)) {
entries[idx].client = client;
entries[idx].page = 0;
entries[idx].reg = PMBUS_MFR_ID;
debugfs_create_file("mfr_id", 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops_mfr);
}
if (pmbus_check_block_register(client, 0, PMBUS_MFR_MODEL)) {
entries[idx].client = client;
entries[idx].page = 0;
entries[idx].reg = PMBUS_MFR_MODEL;
debugfs_create_file("mfr_model", 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops_mfr);
}
if (pmbus_check_block_register(client, 0, PMBUS_MFR_REVISION)) {
entries[idx].client = client;
entries[idx].page = 0;
entries[idx].reg = PMBUS_MFR_REVISION;
debugfs_create_file("mfr_revision", 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops_mfr);
}
if (pmbus_check_block_register(client, 0, PMBUS_MFR_LOCATION)) {
entries[idx].client = client;
entries[idx].page = 0;
entries[idx].reg = PMBUS_MFR_LOCATION;
debugfs_create_file("mfr_location", 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops_mfr);
}
if (pmbus_check_block_register(client, 0, PMBUS_MFR_DATE)) {
entries[idx].client = client;
entries[idx].page = 0;
entries[idx].reg = PMBUS_MFR_DATE;
debugfs_create_file("mfr_date", 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops_mfr);
}
if (pmbus_check_block_register(client, 0, PMBUS_MFR_SERIAL)) {
entries[idx].client = client;
entries[idx].page = 0;
entries[idx].reg = PMBUS_MFR_SERIAL;
debugfs_create_file("mfr_serial", 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops_mfr);
}
/* Add page specific entries */
for (i = 0; i < data->info->pages; ++i) {
/* Check accessibility of status register if it's not page 0 */
if (!i || pmbus_check_status_register(client, i)) {
/* No need to set reg as we have special read op. */
entries[idx].client = client;
entries[idx].page = i;
scnprintf(name, PMBUS_NAME_SIZE, "status%d", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops_status);
}
if (data->info->func[i] & PMBUS_HAVE_STATUS_VOUT) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_VOUT;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_vout", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (data->info->func[i] & PMBUS_HAVE_STATUS_IOUT) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_IOUT;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_iout", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (data->info->func[i] & PMBUS_HAVE_STATUS_INPUT) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_INPUT;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_input", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (data->info->func[i] & PMBUS_HAVE_STATUS_TEMP) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_TEMPERATURE;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_temp", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (pmbus_check_byte_register(client, i, PMBUS_STATUS_CML)) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_CML;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_cml", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (pmbus_check_byte_register(client, i, PMBUS_STATUS_OTHER)) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_OTHER;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_other", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (pmbus_check_byte_register(client, i,
PMBUS_STATUS_MFR_SPECIFIC)) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_MFR_SPECIFIC;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_mfr", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN12) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_FAN_12;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan12", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN34) {
entries[idx].client = client;
entries[idx].page = i;
entries[idx].reg = PMBUS_STATUS_FAN_34;
scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan34", i);
debugfs_create_file(name, 0444, data->debugfs,
&entries[idx++],
&pmbus_debugfs_ops);
}
}
return devm_add_action_or_reset(data->dev,
pmbus_remove_debugfs, data->debugfs);
}
#else
static int pmbus_init_debugfs(struct i2c_client *client,
struct pmbus_data *data)
{
return 0;
}
#endif /* IS_ENABLED(CONFIG_DEBUG_FS) */
int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info)
{
struct device *dev = &client->dev;
const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
struct pmbus_data *data;
size_t groups_num = 0;
int ret;
int i;
char *name;
if (!info)
return -ENODEV;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
| I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
if (info->groups)
while (info->groups[groups_num])
groups_num++;
data->groups = devm_kcalloc(dev, groups_num + 2, sizeof(void *),
GFP_KERNEL);
if (!data->groups)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
data->dev = dev;
if (pdata)
data->flags = pdata->flags;
data->info = info;
data->currpage = -1;
data->currphase = -1;
for (i = 0; i < ARRAY_SIZE(data->vout_low); i++) {
data->vout_low[i] = -1;
data->vout_high[i] = -1;
}
ret = pmbus_init_common(client, data, info);
if (ret < 0)
return ret;
ret = pmbus_find_attributes(client, data);
if (ret)
return ret;
/*
* If there are no attributes, something is wrong.
* Bail out instead of trying to register nothing.
*/
if (!data->num_attributes) {
dev_err(dev, "No attributes found\n");
return -ENODEV;
}
name = devm_kstrdup(dev, client->name, GFP_KERNEL);
if (!name)
return -ENOMEM;
strreplace(name, '-', '_');
data->groups[0] = &data->group;
memcpy(data->groups + 1, info->groups, sizeof(void *) * groups_num);
data->hwmon_dev = devm_hwmon_device_register_with_groups(dev,
name, data, data->groups);
if (IS_ERR(data->hwmon_dev)) {
dev_err(dev, "Failed to register hwmon device\n");
return PTR_ERR(data->hwmon_dev);
}
ret = pmbus_regulator_register(data);
if (ret)
return ret;
ret = pmbus_irq_setup(client, data);
if (ret)
return ret;
ret = pmbus_init_debugfs(client, data);
if (ret)
dev_warn(dev, "Failed to register debugfs\n");
return 0;
}
EXPORT_SYMBOL_NS_GPL(pmbus_do_probe, PMBUS);
struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
return data->debugfs;
}
EXPORT_SYMBOL_NS_GPL(pmbus_get_debugfs_dir, PMBUS);
int pmbus_lock_interruptible(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
return mutex_lock_interruptible(&data->update_lock);
}
EXPORT_SYMBOL_NS_GPL(pmbus_lock_interruptible, PMBUS);
void pmbus_unlock(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
mutex_unlock(&data->update_lock);
}
EXPORT_SYMBOL_NS_GPL(pmbus_unlock, PMBUS);
static int __init pmbus_core_init(void)
{
pmbus_debugfs_dir = debugfs_create_dir("pmbus", NULL);
if (IS_ERR(pmbus_debugfs_dir))
pmbus_debugfs_dir = NULL;
return 0;
}
static void __exit pmbus_core_exit(void)
{
debugfs_remove_recursive(pmbus_debugfs_dir);
}
module_init(pmbus_core_init);
module_exit(pmbus_core_exit);
MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus core driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink