linux/drivers/hwmon/pmbus/mp2975.c
Naresh Solanki 9da2901c47 hwmon: (pmbus/mp2975) Move PGOOD fix
The PGOOD fix was intended for MP2973 & MP2971 & not for MP2975.

Fixes: acda945afb ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231027103352.918895-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-10-27 07:26:29 -07:00

1003 lines
26 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware monitoring driver for MPS Multi-phase Digital VR Controllers
*
* Copyright (C) 2020 Nvidia Technologies Ltd.
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include "pmbus.h"
/* Vendor specific registers. */
#define MP2975_MFR_APS_HYS_R2 0x0d
#define MP2975_MFR_SLOPE_TRIM3 0x1d
#define MP2975_MFR_VR_MULTI_CONFIG_R1 0x0d
#define MP2975_MFR_VR_MULTI_CONFIG_R2 0x1d
#define MP2975_MFR_APS_DECAY_ADV 0x56
#define MP2975_MFR_DC_LOOP_CTRL 0x59
#define MP2975_MFR_OCP_UCP_PHASE_SET 0x65
#define MP2975_MFR_VR_CONFIG1 0x68
#define MP2975_MFR_READ_CS1_2 0x82
#define MP2975_MFR_READ_CS3_4 0x83
#define MP2975_MFR_READ_CS5_6 0x84
#define MP2975_MFR_READ_CS7_8 0x85
#define MP2975_MFR_READ_CS9_10 0x86
#define MP2975_MFR_READ_CS11_12 0x87
#define MP2975_MFR_READ_IOUT_PK 0x90
#define MP2975_MFR_READ_POUT_PK 0x91
#define MP2975_MFR_READ_VREF_R1 0xa1
#define MP2975_MFR_READ_VREF_R2 0xa3
#define MP2975_MFR_OVP_TH_SET 0xe5
#define MP2975_MFR_UVP_SET 0xe6
#define MP2973_MFR_RESO_SET 0xc7
#define MP2975_VOUT_FORMAT BIT(15)
#define MP2975_VID_STEP_SEL_R1 BIT(4)
#define MP2975_IMVP9_EN_R1 BIT(13)
#define MP2975_VID_STEP_SEL_R2 BIT(3)
#define MP2975_IMVP9_EN_R2 BIT(12)
#define MP2975_PRT_THRES_DIV_OV_EN BIT(14)
#define MP2975_DRMOS_KCS GENMASK(13, 12)
#define MP2975_PROT_DEV_OV_OFF 10
#define MP2975_PROT_DEV_OV_ON 5
#define MP2975_SENSE_AMPL BIT(11)
#define MP2975_SENSE_AMPL_UNIT 1
#define MP2975_SENSE_AMPL_HALF 2
#define MP2975_VIN_UV_LIMIT_UNIT 8
#define MP2973_VOUT_FORMAT_R1 GENMASK(7, 6)
#define MP2973_VOUT_FORMAT_R2 GENMASK(4, 3)
#define MP2973_VOUT_FORMAT_DIRECT_R1 BIT(7)
#define MP2973_VOUT_FORMAT_LINEAR_R1 BIT(6)
#define MP2973_VOUT_FORMAT_DIRECT_R2 BIT(4)
#define MP2973_VOUT_FORMAT_LINEAR_R2 BIT(3)
#define MP2973_MFR_VR_MULTI_CONFIG_R1 0x0d
#define MP2973_MFR_VR_MULTI_CONFIG_R2 0x1d
#define MP2973_VID_STEP_SEL_R1 BIT(4)
#define MP2973_IMVP9_EN_R1 BIT(14)
#define MP2973_VID_STEP_SEL_R2 BIT(3)
#define MP2973_IMVP9_EN_R2 BIT(13)
#define MP2973_MFR_OCP_TOTAL_SET 0x5f
#define MP2973_OCP_TOTAL_CUR_MASK GENMASK(6, 0)
#define MP2973_MFR_OCP_LEVEL_RES BIT(15)
#define MP2973_MFR_READ_IOUT_PK 0x90
#define MP2973_MFR_READ_POUT_PK 0x91
#define MP2975_MAX_PHASE_RAIL1 8
#define MP2975_MAX_PHASE_RAIL2 4
#define MP2973_MAX_PHASE_RAIL1 14
#define MP2973_MAX_PHASE_RAIL2 6
#define MP2971_MAX_PHASE_RAIL1 8
#define MP2971_MAX_PHASE_RAIL2 3
#define MP2975_PAGE_NUM 2
#define MP2975_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL)
enum chips {
mp2971, mp2973, mp2975
};
static const int mp2975_max_phases[][MP2975_PAGE_NUM] = {
[mp2975] = { MP2975_MAX_PHASE_RAIL1, MP2975_MAX_PHASE_RAIL2 },
[mp2973] = { MP2973_MAX_PHASE_RAIL1, MP2973_MAX_PHASE_RAIL2 },
[mp2971] = { MP2971_MAX_PHASE_RAIL1, MP2971_MAX_PHASE_RAIL2 },
};
struct mp2975_data {
struct pmbus_driver_info info;
enum chips chip_id;
int vout_scale;
int max_phases[MP2975_PAGE_NUM];
int vid_step[MP2975_PAGE_NUM];
int vref[MP2975_PAGE_NUM];
int vref_off[MP2975_PAGE_NUM];
int vout_max[MP2975_PAGE_NUM];
int vout_ov_fixed[MP2975_PAGE_NUM];
int curr_sense_gain[MP2975_PAGE_NUM];
};
static const struct i2c_device_id mp2975_id[] = {
{"mp2971", mp2971},
{"mp2973", mp2973},
{"mp2975", mp2975},
{}
};
MODULE_DEVICE_TABLE(i2c, mp2975_id);
static const struct regulator_desc __maybe_unused mp2975_reg_desc[] = {
PMBUS_REGULATOR("vout", 0),
PMBUS_REGULATOR("vout", 1),
};
#define to_mp2975_data(x) container_of(x, struct mp2975_data, info)
static int
mp2975_read_word_helper(struct i2c_client *client, int page, int phase, u8 reg,
u16 mask)
{
int ret = pmbus_read_word_data(client, page, phase, reg);
return (ret > 0) ? ret & mask : ret;
}
static int
mp2975_vid2direct(int vrf, int val)
{
switch (vrf) {
case vr12:
if (val >= 0x01)
return 250 + (val - 1) * 5;
break;
case vr13:
if (val >= 0x01)
return 500 + (val - 1) * 10;
break;
case imvp9:
if (val >= 0x01)
return 200 + (val - 1) * 10;
break;
default:
return -EINVAL;
}
return 0;
}
#define MAX_LIN_MANTISSA (1023 * 1000)
#define MIN_LIN_MANTISSA (511 * 1000)
/* Converts a milli-unit DIRECT value to LINEAR11 format */
static u16 mp2975_data2reg_linear11(s64 val)
{
s16 exponent = 0, mantissa;
bool negative = false;
/* simple case */
if (val == 0)
return 0;
/* Reduce large mantissa until it fits into 10 bit */
while (val >= MAX_LIN_MANTISSA && exponent < 15) {
exponent++;
val >>= 1;
}
/* Increase small mantissa to improve precision */
while (val < MIN_LIN_MANTISSA && exponent > -15) {
exponent--;
val <<= 1;
}
/* Convert mantissa from milli-units to units */
mantissa = clamp_val(DIV_ROUND_CLOSEST_ULL(val, 1000), 0, 0x3ff);
/* restore sign */
if (negative)
mantissa = -mantissa;
/* Convert to 5 bit exponent, 11 bit mantissa */
return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
}
static int
mp2975_read_phase(struct i2c_client *client, struct mp2975_data *data,
int page, int phase, u8 reg)
{
int ph_curr, ret;
ret = pmbus_read_word_data(client, page, phase, reg);
if (ret < 0)
return ret;
if (!((phase + 1) % MP2975_PAGE_NUM))
ret >>= 8;
ret &= 0xff;
/*
* Output value is calculated as: (READ_CSx / 80 1.23) / (Kcs * Rcs)
* where:
* - Kcs is the DrMOS current sense gain of power stage, which is
* obtained from the register MP2975_MFR_VR_CONFIG1, bits 13-12 with
* the following selection of DrMOS (data->curr_sense_gain[page]):
* 00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A.
* - Rcs is the internal phase current sense resistor which is constant
* value 1kΩ.
*/
ph_curr = ret * 100 - 9800;
/*
* Current phase sensing, providing by the device is not accurate
* for the light load. This because sampling of current occurrence of
* bit weight has a big deviation for light load. For handling such
* case phase current is represented as the maximum between the value
* calculated above and total rail current divided by number phases.
*/
ret = pmbus_read_word_data(client, page, phase, PMBUS_READ_IOUT);
if (ret < 0)
return ret;
return max_t(int, DIV_ROUND_CLOSEST(ret, data->info.phases[page]),
DIV_ROUND_CLOSEST(ph_curr, data->curr_sense_gain[page]));
}
static int
mp2975_read_phases(struct i2c_client *client, struct mp2975_data *data,
int page, int phase)
{
int ret;
if (page) {
switch (phase) {
case 0 ... 1:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS7_8);
break;
case 2 ... 3:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS9_10);
break;
case 4 ... 5:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS11_12);
break;
default:
return -ENODATA;
}
} else {
switch (phase) {
case 0 ... 1:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS1_2);
break;
case 2 ... 3:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS3_4);
break;
case 4 ... 5:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS5_6);
break;
case 6 ... 7:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS7_8);
break;
case 8 ... 9:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS9_10);
break;
case 10 ... 11:
ret = mp2975_read_phase(client, data, page, phase,
MP2975_MFR_READ_CS11_12);
break;
default:
return -ENODATA;
}
}
return ret;
}
static int mp2973_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct mp2975_data *data = to_mp2975_data(info);
int ret;
switch (reg) {
case PMBUS_STATUS_WORD:
/* MP2973 & MP2971 return PGOOD instead of PB_STATUS_POWER_GOOD_N. */
ret = pmbus_read_word_data(client, page, phase, reg);
ret ^= PB_STATUS_POWER_GOOD_N;
break;
case PMBUS_OT_FAULT_LIMIT:
ret = mp2975_read_word_helper(client, page, phase, reg,
GENMASK(7, 0));
break;
case PMBUS_VIN_OV_FAULT_LIMIT:
ret = mp2975_read_word_helper(client, page, phase, reg,
GENMASK(7, 0));
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST(ret, MP2975_VIN_UV_LIMIT_UNIT);
break;
case PMBUS_VOUT_OV_FAULT_LIMIT:
/*
* MP2971 and mp2973 only supports tracking (ovp1) mode.
*/
ret = mp2975_read_word_helper(client, page, phase,
MP2975_MFR_OVP_TH_SET,
GENMASK(2, 0));
if (ret < 0)
return ret;
ret = data->vout_max[page] + 50 * (ret + 1);
break;
case PMBUS_VOUT_UV_FAULT_LIMIT:
ret = mp2975_read_word_helper(client, page, phase, reg,
GENMASK(8, 0));
if (ret < 0)
return ret;
ret = mp2975_vid2direct(info->vrm_version[page], ret);
break;
case PMBUS_VIRT_READ_POUT_MAX:
ret = pmbus_read_word_data(client, page, phase,
MP2973_MFR_READ_POUT_PK);
break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = pmbus_read_word_data(client, page, phase,
MP2973_MFR_READ_IOUT_PK);
break;
case PMBUS_IOUT_OC_FAULT_LIMIT:
ret = mp2975_read_word_helper(client, page, phase,
MP2973_MFR_OCP_TOTAL_SET,
GENMASK(15, 0));
if (ret < 0)
return ret;
if (ret & MP2973_MFR_OCP_LEVEL_RES)
ret = 2 * (ret & MP2973_OCP_TOTAL_CUR_MASK);
else
ret = ret & MP2973_OCP_TOTAL_CUR_MASK;
ret = mp2975_data2reg_linear11(ret * info->phases[page] * 1000);
break;
case PMBUS_UT_WARN_LIMIT:
case PMBUS_UT_FAULT_LIMIT:
case PMBUS_VIN_UV_WARN_LIMIT:
case PMBUS_VIN_UV_FAULT_LIMIT:
case PMBUS_VOUT_UV_WARN_LIMIT:
case PMBUS_VOUT_OV_WARN_LIMIT:
case PMBUS_VIN_OV_WARN_LIMIT:
case PMBUS_IIN_OC_FAULT_LIMIT:
case PMBUS_IOUT_OC_LV_FAULT_LIMIT:
case PMBUS_IOUT_OC_WARN_LIMIT:
case PMBUS_IOUT_UC_FAULT_LIMIT:
case PMBUS_POUT_OP_FAULT_LIMIT:
case PMBUS_POUT_OP_WARN_LIMIT:
case PMBUS_PIN_OP_WARN_LIMIT:
return -ENXIO;
default:
return -ENODATA;
}
return ret;
}
static int mp2975_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct mp2975_data *data = to_mp2975_data(info);
int ret;
switch (reg) {
case PMBUS_OT_FAULT_LIMIT:
ret = mp2975_read_word_helper(client, page, phase, reg,
GENMASK(7, 0));
break;
case PMBUS_VIN_OV_FAULT_LIMIT:
ret = mp2975_read_word_helper(client, page, phase, reg,
GENMASK(7, 0));
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST(ret, MP2975_VIN_UV_LIMIT_UNIT);
break;
case PMBUS_VOUT_OV_FAULT_LIMIT:
/*
* Register provides two values for over-voltage protection
* threshold for fixed (ovp2) and tracking (ovp1) modes. The
* minimum of these two values is provided as over-voltage
* fault alarm.
*/
ret = mp2975_read_word_helper(client, page, phase,
MP2975_MFR_OVP_TH_SET,
GENMASK(2, 0));
if (ret < 0)
return ret;
ret = min_t(int, data->vout_max[page] + 50 * (ret + 1),
data->vout_ov_fixed[page]);
break;
case PMBUS_VOUT_UV_FAULT_LIMIT:
ret = mp2975_read_word_helper(client, page, phase,
MP2975_MFR_UVP_SET,
GENMASK(2, 0));
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST(data->vref[page] * 10 - 50 *
(ret + 1) * data->vout_scale, 10);
break;
case PMBUS_VIRT_READ_POUT_MAX:
ret = mp2975_read_word_helper(client, page, phase,
MP2975_MFR_READ_POUT_PK,
GENMASK(12, 0));
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST(ret, 4);
break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = mp2975_read_word_helper(client, page, phase,
MP2975_MFR_READ_IOUT_PK,
GENMASK(12, 0));
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST(ret, 4);
break;
case PMBUS_READ_IOUT:
ret = mp2975_read_phases(client, data, page, phase);
if (ret < 0)
return ret;
break;
case PMBUS_UT_WARN_LIMIT:
case PMBUS_UT_FAULT_LIMIT:
case PMBUS_VIN_UV_WARN_LIMIT:
case PMBUS_VIN_UV_FAULT_LIMIT:
case PMBUS_VOUT_UV_WARN_LIMIT:
case PMBUS_VOUT_OV_WARN_LIMIT:
case PMBUS_VIN_OV_WARN_LIMIT:
case PMBUS_IIN_OC_FAULT_LIMIT:
case PMBUS_IOUT_OC_LV_FAULT_LIMIT:
case PMBUS_IIN_OC_WARN_LIMIT:
case PMBUS_IOUT_OC_WARN_LIMIT:
case PMBUS_IOUT_OC_FAULT_LIMIT:
case PMBUS_IOUT_UC_FAULT_LIMIT:
case PMBUS_POUT_OP_FAULT_LIMIT:
case PMBUS_POUT_OP_WARN_LIMIT:
case PMBUS_PIN_OP_WARN_LIMIT:
return -ENXIO;
default:
return -ENODATA;
}
return ret;
}
static int mp2975_identify_multiphase_rail2(struct i2c_client *client,
struct mp2975_data *data)
{
int ret;
/*
* Identify multiphase for rail 2 - could be from 0 to data->max_phases[1].
* In case phase number is zero only page zero is supported
*/
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
if (ret < 0)
return ret;
ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R2);
if (ret < 0)
return ret;
ret &= GENMASK(2, 0);
return (ret >= data->max_phases[1]) ? data->max_phases[1] : ret;
}
static void mp2975_set_phase_rail1(struct pmbus_driver_info *info)
{
int i;
for (i = 0 ; i < info->phases[0]; i++)
info->pfunc[i] = PMBUS_HAVE_IOUT;
}
static void
mp2975_set_phase_rail2(struct pmbus_driver_info *info, int num_phases)
{
int i;
/* Set phases for rail 2 from upper to lower. */
for (i = 1; i <= num_phases; i++)
info->pfunc[MP2975_MAX_PHASE_RAIL1 - i] = PMBUS_HAVE_IOUT;
}
static int
mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data,
struct pmbus_driver_info *info)
{
int num_phases2, ret;
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
if (ret < 0)
return ret;
/* Identify multiphase for rail 1 - could be from 1 to data->max_phases[0]. */
ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R1);
if (ret <= 0)
return ret;
info->phases[0] = ret & GENMASK(3, 0);
/*
* The device provides a total of $n PWM pins, and can be configured
* to different phase count applications for rail 1 and rail 2.
* Rail 1 can be set to $n phases, while rail 2 can be set to less than
* that. When rail 1s phase count is configured as 0, rail
* 1 operates with 1-phase DCM. When rail 2 phase count is configured
* as 0, rail 2 is disabled.
*/
if (info->phases[0] > data->max_phases[0])
return -EINVAL;
if (data->chip_id == mp2975) {
mp2975_set_phase_rail1(info);
num_phases2 = min(data->max_phases[0] - info->phases[0],
data->max_phases[1]);
if (info->phases[1] && info->phases[1] <= num_phases2)
mp2975_set_phase_rail2(info, num_phases2);
}
return 0;
}
static int
mp2975_identify_vid(struct i2c_client *client, struct mp2975_data *data,
struct pmbus_driver_info *info, u32 reg, int page,
u32 imvp_bit, u32 vr_bit)
{
int ret;
/* Identify VID mode and step selection. */
ret = i2c_smbus_read_word_data(client, reg);
if (ret < 0)
return ret;
if (ret & imvp_bit) {
info->vrm_version[page] = imvp9;
data->vid_step[page] = MP2975_PROT_DEV_OV_OFF;
} else if (ret & vr_bit) {
info->vrm_version[page] = vr12;
data->vid_step[page] = MP2975_PROT_DEV_OV_ON;
} else {
info->vrm_version[page] = vr13;
data->vid_step[page] = MP2975_PROT_DEV_OV_OFF;
}
return 0;
}
static int
mp2975_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data,
struct pmbus_driver_info *info)
{
int ret;
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
if (ret < 0)
return ret;
/* Identify VID mode for rail 1. */
ret = mp2975_identify_vid(client, data, info,
MP2975_MFR_VR_MULTI_CONFIG_R1, 0,
MP2975_IMVP9_EN_R1, MP2975_VID_STEP_SEL_R1);
if (ret < 0)
return ret;
/* Identify VID mode for rail 2, if connected. */
if (info->phases[1])
ret = mp2975_identify_vid(client, data, info,
MP2975_MFR_VR_MULTI_CONFIG_R2, 1,
MP2975_IMVP9_EN_R2,
MP2975_VID_STEP_SEL_R2);
return ret;
}
static int
mp2973_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data,
struct pmbus_driver_info *info)
{
int ret;
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
if (ret < 0)
return ret;
/* Identify VID mode for rail 1. */
ret = mp2975_identify_vid(client, data, info,
MP2973_MFR_VR_MULTI_CONFIG_R1, 0,
MP2973_IMVP9_EN_R1, MP2973_VID_STEP_SEL_R1);
if (ret < 0)
return ret;
/* Identify VID mode for rail 2, if connected. */
if (info->phases[1])
ret = mp2975_identify_vid(client, data, info,
MP2973_MFR_VR_MULTI_CONFIG_R2, 1,
MP2973_IMVP9_EN_R2,
MP2973_VID_STEP_SEL_R2);
return ret;
}
static int
mp2975_current_sense_gain_get(struct i2c_client *client,
struct mp2975_data *data)
{
int i, ret;
/*
* Obtain DrMOS current sense gain of power stage from the register
* MP2975_MFR_VR_CONFIG1, bits 13-12. The value is selected as below:
* 00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A. Other
* values are invalid.
*/
for (i = 0 ; i < data->info.pages; i++) {
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
if (ret < 0)
return ret;
ret = i2c_smbus_read_word_data(client,
MP2975_MFR_VR_CONFIG1);
if (ret < 0)
return ret;
switch ((ret & MP2975_DRMOS_KCS) >> 12) {
case 0:
data->curr_sense_gain[i] = 50;
break;
case 1:
data->curr_sense_gain[i] = 85;
break;
case 2:
data->curr_sense_gain[i] = 97;
break;
default:
data->curr_sense_gain[i] = 100;
break;
}
}
return 0;
}
static int
mp2975_vref_get(struct i2c_client *client, struct mp2975_data *data,
struct pmbus_driver_info *info)
{
int ret;
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 3);
if (ret < 0)
return ret;
/* Get voltage reference value for rail 1. */
ret = i2c_smbus_read_word_data(client, MP2975_MFR_READ_VREF_R1);
if (ret < 0)
return ret;
data->vref[0] = ret * data->vid_step[0];
/* Get voltage reference value for rail 2, if connected. */
if (data->info.pages == MP2975_PAGE_NUM) {
ret = i2c_smbus_read_word_data(client, MP2975_MFR_READ_VREF_R2);
if (ret < 0)
return ret;
data->vref[1] = ret * data->vid_step[1];
}
return 0;
}
static int
mp2975_vref_offset_get(struct i2c_client *client, struct mp2975_data *data,
int page)
{
int ret;
ret = i2c_smbus_read_word_data(client, MP2975_MFR_OVP_TH_SET);
if (ret < 0)
return ret;
switch ((ret & GENMASK(5, 3)) >> 3) {
case 1:
data->vref_off[page] = 140;
break;
case 2:
data->vref_off[page] = 220;
break;
case 4:
data->vref_off[page] = 400;
break;
default:
return -EINVAL;
}
return 0;
}
static int
mp2975_vout_max_get(struct i2c_client *client, struct mp2975_data *data,
struct pmbus_driver_info *info, int page)
{
int ret;
/* Get maximum reference voltage of VID-DAC in VID format. */
ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_MAX);
if (ret < 0)
return ret;
data->vout_max[page] = mp2975_vid2direct(info->vrm_version[page], ret &
GENMASK(8, 0));
return 0;
}
static int
mp2975_set_vout_format(struct i2c_client *client,
struct mp2975_data *data, int page)
{
int ret, i;
/* Enable DIRECT VOUT format 1mV/LSB */
if (data->chip_id == mp2975) {
ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL);
if (ret < 0)
return ret;
if (ret & MP2975_VOUT_FORMAT) {
ret &= ~MP2975_VOUT_FORMAT;
ret = i2c_smbus_write_word_data(client, MP2975_MFR_DC_LOOP_CTRL, ret);
}
} else {
ret = i2c_smbus_read_word_data(client, MP2973_MFR_RESO_SET);
if (ret < 0)
return ret;
i = ret;
if (page == 0) {
i &= ~MP2973_VOUT_FORMAT_R1;
i |= MP2973_VOUT_FORMAT_DIRECT_R1;
} else {
i &= ~MP2973_VOUT_FORMAT_R2;
i |= MP2973_VOUT_FORMAT_DIRECT_R2;
}
if (i != ret)
ret = i2c_smbus_write_word_data(client, MP2973_MFR_RESO_SET, i);
}
return ret;
}
static int
mp2975_vout_ov_scale_get(struct i2c_client *client, struct mp2975_data *data,
struct pmbus_driver_info *info)
{
int thres_dev, sense_ampl, ret;
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
if (ret < 0)
return ret;
/*
* Get divider for over- and under-voltage protection thresholds
* configuration from the Advanced Options of Auto Phase Shedding and
* decay register.
*/
ret = i2c_smbus_read_word_data(client, MP2975_MFR_APS_DECAY_ADV);
if (ret < 0)
return ret;
thres_dev = ret & MP2975_PRT_THRES_DIV_OV_EN ? MP2975_PROT_DEV_OV_ON :
MP2975_PROT_DEV_OV_OFF;
/* Select the gain of remote sense amplifier. */
ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_SCALE_LOOP);
if (ret < 0)
return ret;
sense_ampl = ret & MP2975_SENSE_AMPL ? MP2975_SENSE_AMPL_HALF :
MP2975_SENSE_AMPL_UNIT;
data->vout_scale = sense_ampl * thres_dev;
return 0;
}
static int
mp2975_vout_per_rail_config_get(struct i2c_client *client,
struct mp2975_data *data,
struct pmbus_driver_info *info)
{
int i, ret;
for (i = 0; i < data->info.pages; i++) {
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
if (ret < 0)
continue;
/* Set VOUT format for READ_VOUT command : direct. */
ret = mp2975_set_vout_format(client, data, i);
if (ret < 0)
return ret;
/* Obtain maximum voltage values. */
ret = mp2975_vout_max_get(client, data, info, i);
if (ret < 0)
return ret;
/* Skip if reading Vref is unsupported */
if (data->chip_id != mp2975)
continue;
/* Obtain voltage reference offsets. */
ret = mp2975_vref_offset_get(client, data, i);
if (ret < 0)
return ret;
/*
* Set over-voltage fixed value. Thresholds are provided as
* fixed value, and tracking value. The minimum of them are
* exposed as over-voltage critical threshold.
*/
data->vout_ov_fixed[i] = data->vref[i] +
DIV_ROUND_CLOSEST(data->vref_off[i] *
data->vout_scale,
10);
}
return 0;
}
static struct pmbus_driver_info mp2975_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.format[PSC_CURRENT_IN] = linear,
.format[PSC_CURRENT_OUT] = direct,
.format[PSC_POWER] = direct,
.m[PSC_TEMPERATURE] = 1,
.m[PSC_VOLTAGE_OUT] = 1,
.R[PSC_VOLTAGE_OUT] = 3,
.m[PSC_CURRENT_OUT] = 1,
.m[PSC_POWER] = 1,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_PHASE_VIRTUAL,
.read_word_data = mp2975_read_word_data,
#if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR)
.num_regulators = 1,
.reg_desc = mp2975_reg_desc,
#endif
};
static struct pmbus_driver_info mp2973_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = linear,
.format[PSC_CURRENT_IN] = linear,
.format[PSC_CURRENT_OUT] = linear,
.format[PSC_POWER] = linear,
.m[PSC_VOLTAGE_OUT] = 1,
.R[PSC_VOLTAGE_OUT] = 3,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
.read_word_data = mp2973_read_word_data,
#if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR)
.num_regulators = 1,
.reg_desc = mp2975_reg_desc,
#endif
};
static int mp2975_probe(struct i2c_client *client)
{
struct pmbus_driver_info *info;
struct mp2975_data *data;
int ret;
data = devm_kzalloc(&client->dev, sizeof(struct mp2975_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
if (client->dev.of_node)
data->chip_id = (enum chips)(unsigned long)of_device_get_match_data(&client->dev);
else
data->chip_id = i2c_match_id(mp2975_id, client)->driver_data;
memcpy(data->max_phases, mp2975_max_phases[data->chip_id],
sizeof(data->max_phases));
if (data->chip_id == mp2975)
memcpy(&data->info, &mp2975_info, sizeof(*info));
else
memcpy(&data->info, &mp2973_info, sizeof(*info));
info = &data->info;
/* Identify multiphase configuration for rail 2. */
ret = mp2975_identify_multiphase_rail2(client, data);
if (ret < 0)
return ret;
if (ret) {
/* Two rails are connected. */
data->info.pages = MP2975_PAGE_NUM;
data->info.phases[1] = ret;
data->info.func[1] = MP2975_RAIL2_FUNC;
if (IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR))
data->info.num_regulators = MP2975_PAGE_NUM;
}
/* Identify multiphase configuration. */
ret = mp2975_identify_multiphase(client, data, info);
if (ret)
return ret;
if (data->chip_id == mp2975) {
/* Identify VID setting per rail. */
ret = mp2975_identify_rails_vid(client, data, info);
if (ret < 0)
return ret;
/* Obtain current sense gain of power stage. */
ret = mp2975_current_sense_gain_get(client, data);
if (ret)
return ret;
/* Obtain voltage reference values. */
ret = mp2975_vref_get(client, data, info);
if (ret)
return ret;
/* Obtain vout over-voltage scales. */
ret = mp2975_vout_ov_scale_get(client, data, info);
if (ret < 0)
return ret;
} else {
/* Identify VID setting per rail. */
ret = mp2973_identify_rails_vid(client, data, info);
if (ret < 0)
return ret;
}
/* Obtain offsets, maximum and format for vout. */
ret = mp2975_vout_per_rail_config_get(client, data, info);
if (ret)
return ret;
return pmbus_do_probe(client, info);
}
static const struct of_device_id __maybe_unused mp2975_of_match[] = {
{.compatible = "mps,mp2971", .data = (void *)mp2971},
{.compatible = "mps,mp2973", .data = (void *)mp2973},
{.compatible = "mps,mp2975", .data = (void *)mp2975},
{}
};
MODULE_DEVICE_TABLE(of, mp2975_of_match);
static struct i2c_driver mp2975_driver = {
.driver = {
.name = "mp2975",
.of_match_table = of_match_ptr(mp2975_of_match),
},
.probe = mp2975_probe,
.id_table = mp2975_id,
};
module_i2c_driver(mp2975_driver);
MODULE_AUTHOR("Vadim Pasternak <vadimp@nvidia.com>");
MODULE_DESCRIPTION("PMBus driver for MPS MP2975 device");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(PMBUS);