Fabrice Gasnier 204a6a25db iio: adc: stm32: make per instance bus clock optional ... STM32F4 requires one clock per ADC instance for register access. But, newer version of ADC hardware block have common bus clock for all instances (per instance driver isn't responsible for getting it). So, make it optional by default. Still, enforce it's required on STM32F4. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-06-11 15:07:26 +01:00
..
accel	iio: accel: bma180: Add ACPI enumeration support for BMA250E	2017-05-21 15:06:17 +01:00
adc	iio: adc: stm32: make per instance bus clock optional	2017-06-11 15:07:26 +01:00
amplifiers
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio: hid-sensor-hub: Implement batch mode	2017-05-16 19:44:01 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	First set of new device support, features and cleanups for IIO in the 4.13 cycle	2017-05-29 15:53:42 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: add power management support	2017-05-14 16:52:33 +01:00
imu	iio: imu: st_lsm6dsx: substitute ifdef CONFIG_PM with __maybe_unused macro	2017-05-21 15:07:59 +01:00
light	iio: light: rpr0521 channel numbers reordered	2017-05-21 15:06:15 +01:00
magnetometer	Merge 4.11-rc4 into staging-next	2017-03-27 09:11:25 +02:00
orientation	iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support	2017-05-07 12:22:36 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: zpa2326: report interrupted case as failure	2017-05-14 15:28:14 +01:00
proximity	iio: proximity: as3935: move storm out of range check	2017-04-27 07:22:46 +01:00
temperature	iio: temperature: maxim_thermocouple: add MAX31856 part	2017-05-07 12:36:41 +01:00
trigger	iio: stm32 trigger: Add support for TRGO2 triggers	2017-05-07 16:08:10 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c	First set of new device support, features and cleanups for IIO in the 4.13 cycle	2017-05-29 15:53:42 +02:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c
inkern.c	iio: inkern: fix a static checker error	2017-04-26 06:04:06 +01:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00